Allwinner sunxi

After creating my own initramfs using this command from a chroot-ed environment sudo update-initramfs -t -u -k `uname -r` And rebooting, I get the following error: Found U-Boot script /boot/boot.scr 3708 bytes read in 126 ms (28.3 KiB/s) ## Executing script at 43100000 U-boot loaded from eMMC or secondary SD Boot script loaded from mmc 202 bytes read in 80 ms (2 KiB/s) 5731772 bytes read in 668 ms (8.2 MiB/s) 6790944 bytes read in 759 ms (8.5 MiB/s) Found legacy kernel configuration ** File not found /boot/script.bin ** ## Loading init Ramdisk from Legacy Image at 43300000 ... Image Name: uInitrd Image Type: ARM Linux RAMDisk Image (gzip compre…

Hi all, looking for jessie img for Pine64so, found it for Pine64 but not for SOPINE thanks

I have cubieboard2 nand chinese usb-modbus stik with ch340 chip. when I connet ch340 chip to usb cubieboard is freezed, ttyS0 is blocked. cubieboard is work but is very very slow, ssh is not disconnected but don't answer by my command. when I disconnect ch340 chip cubieboard will bee unfrozen but ttyS0 is blocked until I don't make hard (power) reset. Software reset is not unfroze ttyS0. I cannot found src for ch340 chip diver. Driver from china web is not compiling. uname -a Linux cubieboard2 4.14.18-sunxi #31 SMP Fri Feb 9 11:11:15 CET 2018 armv7l GNU/Linux dmesg [ 1129.203974] usb 4-1: new full-speed USB device number 4 …

Hello, I'm using a Banana Pi P2-Zero based on H3 and I want to get Ethernet running. To no avail so far... When building the image, I use this parameters: BOARD=bananapim2zero BRANCH=current RELEASE=jammy BUILD_MINIMAL=no BUILD_DESKTOP=no I use the customize-image.sh script, but I don't change anything related to the drivers (or so I think). There are no patches, overlays or anything like that. I saw this topic but this solution doesn't help: I also tried something like this but it didn't help either: /dts-v1/; /plugin/; / { compatible = "allwinner,sun8i-h3"; fragment@0 { target = <&emac>…

Hello, I run Debian/Jessie on a bananapi pro. The board suddenly stopped working completely. When I plug the power supply, the red led shows up (not blinking) and nothing more, no sign of activity at all, like on screen (hdmi). It is very surprising as it has been running very well for two years now, with a 5V/3A power supply and a sandisk SD card (like those advised). I checked that the sd card runs well on my laptop, the filesystem was not broken and no sign of corruption so far, especially in the /boot directory, no changes made lastly in this directory : latest modification dater are a few months ago. …

Hello everybody... I will use this small "box" as Access Point (AP) Standard scenario, hostapd + dnsmasq, eth0 and wlan0 bridged to br0 Everything works fine, except one "client" .. Hostapd DEAUTHENTICATE my notebook. It has dual band interface - 03:00.0 Network controller: Intel Corporation Centrino Advanced-N 6200 (rev 35) (Linux Mint inside) .. This was happen on all Armbian images with 4.14.y kernel ... .. On Armbian Xenial with 3.4.x kernel this was no happened.. Wifi connection works fine, for a long time ... Heve anybody same problem .. ?? or not ..? Here is log:

Dear Igor, I compiled a kernel (Wheezy mainline) with your script, everything is perfect! There is only one thing, what I don't know how to do: I need to patch rtl28xxu.c before compiling or /even better/ if it possible to compile this module only and overwrite the .ko file at "/lib/modules/4.0.4-bananapi/kernel/.....folder". Could you help me please how can I do that? At line 1612 I need to change: - rc->interval = 400; to this: + rc->interval = 200; Thank you very much! Gyuri

HI, I have a orange pi zero + with a NAS board (orange pi zero nas) with a msata ssd (kingspec 64 Gb): But armbian don't releave msata device, because with fdisk command I have: fdisk -l Disk /dev/ram0: 4 MiB, 4194304 bytes, 8192 sectors Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk /dev/ram1: 4 MiB, 4194304 bytes, 8192 sectors Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk /dev/ram2: 4 MiB, 4194304 bytes, 8192 sectors Units: sectors of …

Hello and thanks in advance. I have installed the IMG Debian Wheezy With kernel 3.4.x, when income Rpi monitoring tells me I have 11 upgradeable packages, but if I run apt-get update and apt-get upgrade returns me that there is nothing to update. Moreover Igor saw yesterday published an update, it is possible to upgrade without reinstalling everything? The problem that I have and which I intend to upgrade is that once a day or once every two days or ethernet banana itself hangs and can not access until I restart the banana pi. Thank you very much and apologize for using google translator.

Hi Friends Greetings and thanks for such a lovely forum. I have recently purchased a nanopi m1 which is based Allwinner H3. Can someone please guide me on howto build an Armbian kernel + Armbian uboot with a custom userspace linux. More specifically I want to boot it with alpine-uboot-3.3.3-armhf.tar.gz image. Any help? Thanking you I hope you dont mind

I've installed Armbian_5.14_Orangepiplus_Debian_jessie_3.4.112_desktop on a ORANGE PI PLUS 2 H3 QUAD CORE 1,6Gz / _ \ _ __ __ _ _ __ __ _ ___ | _ \(_) _ | | | | '__/ _` | '_ \ / _` |/ _ \ | |_) | |_| |_ | |_| | | | (_| | | | | (_| | __/ | __/| |_ _| \___/|_| \__,_|_| |_|\__, |\___| |_| |_| |_| |___/ Welcome to ARMBIAN Debian GNU/Linux 8 (jessie) 3.4.112-sun8i System load: 0.52 Up time: 1 min Memory usage: 14 % of 2013Mb CPU temp: 59°C Usage of /: 19% of 15G then installed lightdm and running the xfce4 desktop with HDMI monitor of 1920x1080 I can't…

Hello guys, at first I want to says thanks for the great OS that you deliver. I use it since 8 months on a bunch of nano-pi neo2's and it runs rock solid. However i rebuild from time to time the image I use from scratch in order to see that the installation is reproducable and repeatable. Today it has encountered that the installation of 'apt-get install python:armhf python-dev:armhf' failed with: # dpkg --add-architecture armhf # sudo apt-get update .... Reading package lists... Done # sudo apt-get install -y python-pip python:armhf python-dev:armhf Reading package lists... Done Building dependency tree Readin…

Hi. I am hoping to connect this type of IR receiver to my NanoPi Neo. https://www.jaycar.com.au/arduino-compatible-infrared-receiver-module/p/XC4427 I am hoping that all I need to do is connect 5v, ground and signal to the IR receiver pin to pin 6 on the header. Can anyone help me with the software and what I need to do to install lirc so the IR receiver is recognised? TIA V.

Hi, I'm running armbian ubuntu image 4.13.14-sunxi64 on Orange Prime, and have a problem. Wifi wont work. I can see a wlan0 as a result of ifconfig, but it neither find a wireless network, nor connect to provided. From dmesg i can see driver is spamming with message [ 303.336420] RTL8723BS: ERROR sd_recv_rxfifo: alloc recvbuf FAIL! I have /var/log overflow in several minutes and also frequent system freezes. rmmod r8723bs causes all this stuff to stop. Can anyone suggest where should i look? Thanks. Btw, self built debian stretch image 4.14 gives the same behaviour. I understand that H5 support is experimental, I just want t…

Hello, after the usual apt update/apt upgrade the OS requested a reboot. However it then fails to boot. Here's the output of the console: I guess the critical stuff is what I marked in bold? So what happened here and what to do to recover? Not keen to reinstall the whole OS... Edit: I pulled th SD-Card and read it from a Linux PC. When I take a look at /boot/boot.scr it is clearly corrupted! If I'm correct there's binary data inside, however in the hexdata I can see some segments with ASCII text fragments inside that releates to my private data (e.g. names of mp3 files!!) and that shoud definitely not be in boot.scr. So whatever…

Hi i cant connect my orange pi pc plus via wifi. I have install armbian 5.20 and then "sudo apt-get update" and "sudo apt-get upgrade" I try to configure with nmtui, but i cant or dont know how to do Can anyone help me with a tutorial please?? Thanks a lot

Hi. I'm running armbian on a OrangePi PC 2. This is my uname -a output: root@picard:/lib/modules# uname -a Linux picard 4.18.0-rc8-sunxi64 #30 SMP Mon Aug 13 00:57:56 CEST 2018 aarch64 aarch64 aarch64 GNU/Linux I am running LVM2 on that system. I updated today, and the dm-raid kernel module seems to have gone missing. I can't get my LVM volume group up anymore, since it can't find dm-raid: root@picard:/lib/modules# lvscan inactive '/dev/vg-data/lv-data' [2.70 TiB] inherit root@picard:/lib/modules# lvchange -ay vg-data/lv-data modprobe: FATAL: Module dm-raid not found in directory /lib/modules/4.18.0-rc8-sunxi64 /sbin/modprobe failed…

hello, my orangepi3 after the updates of firmware of these days seems to loose eth0, at reboot take eth0 and eth0:avahi with class 169 ip. i made backups (i use a sd to restore the mmc mouting hd and then copy the gzip image) so i have not problems to restore but, i suspect, the previus version is working but the new one not. sorry for my worst english... ab

Hello I have an Orangepi One which fails after running for a certain time. In the failed "state" pinging it still works, but SSH connections to the Orangepi or from the Orangepi to the Server via Autossh won't work any more. A PHP application running on it is still working. It looks like the issue is that it winds back the time to something ridiculous. Hard reset with pulling Power fixes this for again a certain time till it happens again. I wrote a script which runs every Minute via Cronjob and logs the current time to a file. Before the rewind already something weird is happening. The cronjob is executed twice on 04.40. I have no idea what is hap…

Hi, I have a beelink X2 and did: apt-get update apt-get upgrade apt-get install -f apt-get update apt-get autoremove -y I think i have version 5.20. If i look at: cat /etc/*-release # PLEASE DO NOT EDIT THIS FILE BOARD=beelinkx2 BOARD_NAME="Beelink X2" VERSION=5.20 LINUXFAMILY=sun8i BRANCH=default ARCH=arm PRETTY_NAME="Debian GNU/Linux 8 (jessie)" NAME="Debian GNU/Linux" VERSION_ID="8" VERSION="8 (jessie)" ID=debian HOME_URL="http://www.debian.org/" SUPPORT_URL="http://www.debian.org/support" BUG_REPORT_URL="https://bugs.debian.org/" So i think i have version 20 But if i do an: cat /proc/version Linux version 3.4.112-sun8i (root@xenial) (gcc…

I have an external HDD connected to my OPi One and this are the temperatures in armbian monitor.

Hi guys, ive installed armbian 5.2 into my opione, now what should i do? Videos 1080p work slowly in kodi, i have to do something? Thanks Inviato dal mio HUAWEI SCL-L21 utilizzando Tapatalk

I have Orange Pi PC plus. When I install Jessie Desktop it doesn't start desktop and only runs command prompt. Tell me how to start Desktop

I've been reading on the forums on the possibility of having multiple OSes inside 1 EMMC for the Opi PC+. From what I understand, inside a typical EMMC installation, it has 3 partitions: 1) Bootloader partition, which runs first and starts the main partition 2) main partition, contains OS files 3) unallocated free space suppose I have 2 devices: 1. Armbian Jammy Server 2. Armbian Jammy Desktop Now I want to make another device that has 2 OS partitions, like so: 1) Bootloader 2) 1st OS main partition, 3) 2nd OS main partition, 4) unallocated free space I'm thinking of using DD to extract the …

Hi all, The plot thickens. This is only an issue when eth0 is given an IPv6 address by my home router. If i disable IPv6 at home my problem goes away. I am having some issues getting wireguard to play the game. I have a fresh Armbian Focal 22.02 install on a NanoPi Neo. The problem is that the wirguard interface comes up, then traffic doesn't flow., not even to the other side of the wireguard link (10.66.0.1). tcpdmping on the other side of the connection shows no packets at all coming into the far ends 51820. Stopping wireguard on both sides and using netcat via UDP and TCP I can see the traffic I expect. I can also use my Android mobile phone and…

today I compiled a image for my OPi One: Armbian Buster with Linux 5.4.2-sunxi package bsp-kernel[19.11.3.342] u-boot[19.11.3] dtb[19.11.3.342] firmware[19.11.3] config[19.11.3] branch[dev] but mpg123 is playing a 128kb/s Radio-Stream much too fast via HDMI (hw:0,0) - streaming the same URL via a USB-Audio-Dongle (hw:1,0) has the right speed Spoiler root@opi-one(192.168.6.114):/toshiba/iradio/stations# more ./MP3_SAW_80s http://saw-de-hz-fal-stream10-cluster01.radiohost.de/saw-80er_128 root@opi-one(192.168.6.114):/toshiba/iradio/stations# mpg123 -v -b 2048 -a hw:1,0 -@ ./MP3_SAW_80s High Performance …

My armbian system is installed from Armbian_community_25.2.0-trunk.160_Orangepipc_bookworm_current_6.6.62_minimal.img.xz. All updates applied. I wanted to make it run with overlayroot. So, I installed the package and added "extraargs=overlayroot=tmpfs" to armbianEnv.txt. After reboot nothing changed. In /run/initramfs/overlayroot.log I found this: builtin set cfgdisk='disabled' [warning]: loaded 'overlay' module but no 'overlay' in /proc/filesystems Unable to find driver/module. searched: overlay overlayfs [failure]: Unable to find a driver. searched: overlay overlayfs I looked into scripts/init-bottom/overlayroot inside the initrd, and f…

I wouldn't ask for help here if I could find enough information to solve my problem. My program takes user-space GPIO interrupts as signals. It depends on this feature and GPIO interrupts are not replaceable. Testing code is as follows (on Pin12/PA07/GPIO7) by using SysfsGPIO: echo 7 > /sys/class/gpio/export echo in > /sys/class/gpio/gpio7/direction echo falling > /sys/class/gpio/gpio7/edge Check if it works with command `cat /proc/interrupts`: watch -n3 "cat /proc/interrupts | grep sunxi_pio" After configuration, give GPIO7 a pulse by attaching it to 3V3. This method does works on Orange Pi 0+ H5 running Ar…

Hi, guys, great stuff here ! I am testing: Orange Pi One, 8GB SD Armbian 3.4.110-sun8i MotionEye, (great stuff https://github.com/ccrisan/motioneye/wiki) It all is working very well, (only a few resolutions like 1440x960 are usable for now). Much better than the old and too slow RPi1, being replaced But my var/log/syslog is filling op rapidly with warnings about the Orange Pi Camera module. 5-6 lines per second : May 3 23:44:11 OrangePi01 kernel: [ 1713.501813] [VFE_WARN] Nobody is waiting on this video buffer,buf = 0xd38b7c80 May 3 23:44:11 OrangePi02 kernel: [ 1713.742666] [VFE_WARN]Only two buffer left for csi May 3 23:44:11 OrangePi02 kernel: [ 1…

So when I try to run the Buster image for Olinuxino64, after the initial U-Boot screen it spends some excessive time with lines Starting version 241 (about a minute or two) Begin: Running /scripts/local-premount ... Scanning for Brtfs filesystems. done. (many minutes. Does it have anything to do with the fact I have some old data on the on-board eMMC?) These appear on the splash screen with armbian logo via HDMI, not on the serial console. When it finally boots, USB keyboard is not working (nor USB in general, dmesg shows nothing when i try to plug/unplug various devices) and the system is very unstable... It took me several times to even run armb…

I have an Orange Pi PC Plus running the mainline Debian Stretch desktop version of Armbian, but lately I've been using it headless. When I'm logged in over ssh and shutdown it down using "sudo shutdown -h now", the ssh connection drops and the board's LED flashes then shuts off, giving every indication the board is off. However, power consumption doubles (increasing from ~1.2W to ~2.4 W)! The problem persists as long as the board is powered, so I presume the board is hung and never fully shutdown. Any thoughts as to what could be causing the board to hang when shutting down?

Hello, i've got a problem with my orangepi lite. Here are a few posts about problems with connecting to wifi networks, but my device can't even find wifi networks (with iwlist wlan0 scan ). In my area are multiple access point active. The OS is armbian for OrangePi Lite Version: 5.20. iwconfig shows the chip with no errors. I have tried multiple settings in /etc/network/interfaces and /etc/wpa_supplicant/wpa_supplicant.conf after posts in this forum but nothing is working ...

Just bumped this one: Orange Pi Zero, stable version, legacy kernel Trying to insert Realtek WiFi dongle (8188eu in my case). Module cannot load - with this error: Peeked solution on 4pda - http://4pda.ru/forum/lofiversion/index.php?t750921-1740.html - decompiled script bin and set wifi_usbc_id = 1 - before it was set to none. Original solution has value "2", but it was just a guess, so I used "1". Module worked in parallel with original xradio. According to original poster on 4pda, this issue was seen on Orange Pi PC. Not sure, is it correct solution, but, well - it may help. Issues seen - when I try to un…

Hi guys, I'm a bit lost with this one. I want to setup a way of basically reinstalling a NanoPi Neo over the network. My thought process is: 1. Boot from NFS. 2. In the boot process have a script that runs the nand-sata-install.sh (or modified version of). 3. Reboot with new OS from USB. Now, I'm sure I can get this working, the bit that I am having trouble working out is how the bootloader will know if we should be loading from NFS or USB. Can UBoot grab this from the network? Ideally this will also be done without SSH access. I know this is a complicated problem but any guidance in the right direction will be really appreciated. Thanks!

Hi, there are invalid references inside sun50i-h5-fixup.scr, I think. I use NANOPINEO2, myself compiled linux-*-current-sunxi64_20.05.0-trunk_arm64.deb, kernel 5.4.28-sunxi64 #trunk SMP PREEMPT. amrbianEnv.txt (reduced): overlay_prefix=sun50i-h5 overlays=i2c0 uart1 uart2 usbhost1 usbhost2 usbhost3 param_uart1_rtscts=1 param_uart2_rtscts=1 For example, the row param_uart2_rtscts=1 leads to use following rows of sun50i-h5-fixup.scr: fdt get value tmp_phandle1 /soc/pinctrl@1c20800/uart2 phandle fdt get value tmp_phandle2 /soc/pinctrl@1c20800/uart2_rts_cts phandle fd…

Hello. I failed to switch from legacy to mainline kernel on my OPi 2 mini (it's an OPi 2 without onboard wifi). I installed the packages: linux-image-dev-sun8i linux-headers-dev-sun8i linux-firmware-image-dev-sun8i and rebooted, but the system hangs at "Uncompressing Linux... done, booting the kernel." (from serial console), green led solid on and ethernet port leds both solid on, no output on HDMI. Then I found this thread and tried to set the clock, but boot fails the same. Spoiler U-Boot SPL 2016.03-rc2-armbian (Mar 08 2016 - 20:18:51) DRAM: 1024 MiB Trying to boot from MMC U-Boot 2016.03-r…

I have my Orange Pi Zero flashed correctly (I think) with the green light solid and the red light flashing on every so often. I've got the unit plugged into a charger that provides sufficient power. The devices SoC warms up hinting that it is actually booting. When plugged into my network the activity LEDs do not flash nor does my router detect it. I'm considering connecting my keyboard to connect it to wifi blind. If I plug it in after boot nothing changes. What should I do? How can I connect it to my wifi blind? I do not have the shield for video out.

I got an Orange Pi zero with expansion board and tried many images , the original ones, h3droid and armbian legacy...by the way, all the systems show the image in a looping on my tv(rolling from bottom to top). Is there something to fix it or any reason that can cause it?

Hi, After upgrading linux-image-current-sunxi64 package from 21.08.1 to 22.02.1, bringing kernel version 5.15.25, the CPU temperature raised abnormaly on my olimex teres board. Temperature is above 60°C at startup, whithout any activity or load average. The issue persists with latest 5.16.16 kernel from linux-image-edge-sunxi64 package. I noticed temp at startup around 30°C with 5.4.88-sunxi64 kernel, 40°C with 5.10.60-sunxi64 kernel and above 60°C with 5.15+ kernels. Does anyone have cpu temp issue with 5.15+ kernels ?

how can I force set HDMI output like 1024x768 60hz or something like that? hello I have OPI lite 2, I use Armbian_5.61.180927_Orangepilite2_Ubuntu_bionic_dev_4.18.10.img, when I boot OPI I can see preboot information then after 1-3 sec I have no signal on my monitor I tried different hdmi cables without luck uname -a Linux orangepilite2 4.18.11-sunxi64 #312 SMP Sun Sep 30 00:22:52 CEST 2018 aarch ps: monitor dell 2414h I tried different OS like android (native, zidoo h6 pro, beelink gs1) also ubuntu 16.04 without any monitor issue, at least video output worked at any cases but they have another issues

Hello. I have an Orange Pi PC+. I've just dd-ed Armbian 5.30 to an SD card and booted it up. Whenever i try to set the resolution to anything aside from the default 1280x720, then i only get a black screen. (I did not tried all possibilites.) How can i set my resolution to 800x480? It's connected via HDMI to a small LCD screen panel with this board. The output of h3disp: Usage: h3disp [-h/-H] -m [video mode] [-d] [-c [0-2]] ############################################################################ This is a tool to set the display resolution of your Orange Pi by patching script.bin. In case you use an HDMI-to-DVI converter p…

I have a Lenovo Mini USB keyboard N5901. It doesn't seem to work with the following image: Armbian_5.20_Orangepione_Debian_jessie_3.4.112 Can anyone assist on what I should do to enable the keyboard?

I downloaded and booted successfully from the Debian Jessie image available on http://www.armbian.com/olimex-lime-a10/ for the LIME. Now I'd like to install an image to NAND, but there's currently no 3.4 kernel version available for the A10. (I've also checked the mirror). I was wondering (before breaking my neck trying to build it) whether this was simply due to no image having been built yet, or due to some circumstances making it impossible to run a 3.4 on the LIME A10? Thanks

Is there anything that can be done about it? Something will start(e.g. minisatip, mumudvb) to disproportionately use the cpu and after a short time it will crash completely. A similar configuration works well on an OPI PC(Linux orangepipc 4.10.1-sun8i #1 SMP Sun Mar 5 18:47:02 CET 2017 armv7l GNU/Linux), but with newer versions it behaves just as incorrectly. I've tested other images (ubuntu, debian), but it's the same everywhere.

Banana Pi M1+, kernel 4.19.38-sunxi, Debian stretch I needed to get bus i2c-2 working so I went to armbian-config, ticked i2c-2. After reboot I found some information from PMU were missing, some i2c buses were removed and some added. before crw-rw---- 1 root i2c 89, 0 May 26 18:24 /dev/i2c-0 crw-rw---- 1 root i2c 89, 1 May 26 18:24 /dev/i2c-1 after crw-rw---- 1 root i2c 89, 2 Jun 11 10:29 /dev/i2c-2 crw-rw---- 1 root i2c 89, 3 Jun 11 10:29 /dev/i2c-3 crw-rw---- 1 root i2c 89, 4 Jun 11 10:29 /dev/i2c-4 armbianEnv.txt verbosity=0 logo=disabled console=both disp_mode=1920x1080p60 overlay_prefix=sun7i-a20 rootdev=UUID=078696…

In case anyone else is considering this. I can confirm that I was able to compile Dual DHCP DNS Server on the Orange Pi Zero Plus board by using the instructions for 64 bit Linux as given in the Dual DHCP DNS Server manual (in the download). The project is hosted on Source Forge https://sourceforge.net/projects/dhcp-dns-server/ This is a very lightweight but powerful DHCP/DNS server for Windows and Linux. I currently am running a primary server on Windows and a secondary on the Orange Pi. My current OS is ARMBIAN 5.38 stable Ubuntu 16.04.4 LTS 4.14.48-sunxi64. I suspect that it will work for other versions of the OS and board too. Daemonize proved to be s…

After running "stress" with loadavg=6 for a while, wifi is lost and CPU temp fluctuates between 50-78C, and I saw 20+ errors such as: Write-error on swap-device all related to zram but I do have 130M RAM free, other than lost wifi and those errors shown, the system still appears to running, I can ssh via wired ethernet port and poking around it.

The page for the Banana Pi image says: "Known bugs or limitations Latest 3.4.107 image have some stability issues. Build from sources or wait for update." I have some questions about this: - What kind of stability issues should I expect? I am seeing some network problems currently, however a lot of hardware in my network was replaced recently so I'm not sure if the banana pi is the source of these problems. The banana pi never locks up/show kernel oops/etc. - How would building from source help? I would expect to get the same image with the same problems. - When can I expect a new image to be available? Is it enough to download an old kernel from the archive? Or is t…

Hi all, i have orangepione uname -a Linux orangepione 4.19.20-sunxi #5.75 SMP Sat Feb 9 19:02:47 CET 2019 armv7l GNU/Linux And i try create hid gadget keyboard. I find topics about raspi zero, orange pi zero, and i use config from where. So i can create keyboard, and when i connect it to linux or windows machine i can see symbols, but when i try send key to macbook bios i have no luck. Did anybody know how to get work with macbook? /etc/modules dwc2 libcomposite /etc/rc.local /usr/bin/isticktoit_usb exit 0 alex@orangepione:~$ cat /usr/bin/isticktoit_usb #!/bin/bash sleep 10 # Create gadget mkdir /sys/kernel/config/usb_gadget…

Hello, this is my first topic on the forum. Please forgive my English is poor. I use Orange Pi PC, version Armbian_5.05_Orangepih3_Debian_jessie_3.4.110, with a patch to kswapd0: CMA-linux-image-sun8i_5.07_armhf.deb from this: https://github.com/igorpecovnik/lib/issues/219 SD card is: SanDisk microSDXC UHS-I 64GB speed up to 48MB/s (write speed in OPi is over 20MB/s). I have a problem that when writing to the card. For example, downloading a file by multiple instances wget. The SD card stops responding and crashes Opi. Only helps to disconnect the power supply. The card is new and fully operational. When I connect the monitor displays the following messag…

Guys, please help. I installed one orange pi plus 2e and orange pi one in following way: first server image (legacy kernel) then kernel upgrade to mainline. Everything works just fine, except I do not receive kernel updates. If I understood well, kernel should be upgraded via apt dist-upgrade.. But nothing. On both this machines I've got same situation: Welcome to ARMBIAN 5.31 stable Ubuntu 16.04.3 LTS 4.11.5-sun8i igor@orangepione:~$ uname -a Linux orangepione 4.11.5-sun8i #11 SMP Fri Jun 23 20:03:23 CEST 2017 armv7l armv7l armv7l GNU/Linux in my apt sources I have: igor@orangepione:~$ grep -h ^deb /etc/apt/sources.…

Hello ! I have a Banana Pi M3 that has 0 output on every pin. I measured 0 output using an oscilloscope. I have been on all of the forums I can think of and I got no answer. How can I make the pins of this damned board work like the ones from a Raspberry Pi ? How does one define a pin ? What does defining a pin means ? Because the pins look dead to me. How do I make them start ? How do I make them to output something... anything ? I am a total and complete noob and I have no idea of the kernel voodoo that has to be done. I am using ARMBIAN 5.83 stable Debian GNU/Linux 9 (stretch) 4.19.38-sunxi

Hi, I'm fairly new to SBCs and Linux and try to get RS485 working on a NanoPi NEO running Armbian (Legacy 3.4.113). I build a custom shield for the NanoPi Neo with a MAX3485 taht is connected to the UART2 (TX,RX,RTS) but so far only transmission works. This is because the RTS pin which I planned to use for toggling the direction pins is always high. I tried to use ioctrl to have it been toggled automatically, but had no success so far. I'm tried to figure out whats the problem and I believe that the configuration of the UART2 does not include the RTS signal: cat /proc/tty/driver/uart |head -8 serinfo:1.0 driver revision: 0: uart:SUNXI mmio:0x01C28000 irq:…

Hello, i want to compile an new Kernel for my BananaPi and used the great script from Igor. (Thanks for your support). Everything works perfect, but there are one error by the development of the Kernelmodul tusbd.ko. Do you know them? [ ok ] Installing external applications --2015-07-03 21:56:33-- http://www.incentivespro.com/usb-redirector-linux-arm-eabi.tar.gz Auflösen des Hostnamen »www.incentivespro.com (www.incentivespro.com)«... 74.52.236.44 Verbindungsaufbau zu www.incentivespro.com (www.incentivespro.com)|74.52.236.44|:80... verbunden. HTTP-Anforderung gesendet, warte auf Antwort... 200 OK Länge: 1851845 (1,8M) [application/x-gzip] In »»usb-redire…

I'm on an Orange Pi One with a fresh install of Armbian 5.38. I've installed build-essential and linux-headers-sun8i but not having any luck. I've also got the newest make version (4.1-9.1). Could someone point me in the right direction? EDIT: I've also attempted to use armbian-config to add headers but that hasn't seemed to work either

Hi! I just installed a fresh Armbian_5.14_Lamobo-r1_Debian_jessie_3.4.112 image to my R1. While booting, the system first shows about a page of boot-messages on the Display and then changes to a Out-of-Range Display. Changing console by <Ctrl><Alt><F1>, ...F2,... Fn doesn't help. Accessing the system with PUTTY/ssh works fine. apt-get update/upgrade/reboot won't help. The display does 1280x1024 resolution maximum. Just before I used banian without any problems. What should I do?

Hi all, I trying many days set up temperature sensor work, but no luck ( Orange PI PC Armbian 20.11.3 Focal with Linux 5.9.14-sunxi try many pins, 3 and 5 V , but same result, no sensor read. No any resistor, 1 sensor armbianenv: overlays=w1-gpio usbhost0 param_w1_pin=PD14 param_w1_pin_int_pullup=1 output: root@orangepipc:~# gpio readall +------+-----+----------+------+---+OrangePiH3+---+------+----------+-----+------+ | GPIO | wPi | Name | Mode | V | Physical | V | Mode | Name | wPi | GPIO | +------+-----+----------+------+---+----++----+---+------+----------+-----+------+ | | | 3.3V | | | 1 …

I'm working in a project that needs to use 12 GPIO pins (plus serial!) on the Orange Pi Zero. To achieve that, I need to disable at least one of the I2C interfaces in the 26-pin header. Following the instructions on https://linux-sunxi.org/I2Cdev, I have decompiled, edited and recompiled /boot/config.bin, but I still can't access any of the pins used by the I2C ports. Specifically, what I have done is to edit the decompiled script.bin.fex file, and in sections named [twi0] and [twi1], changed twi_used=1 to twi_used=0. After that, running a simple program that sets the pins to input and reads its status allways returns 1, even if the pin is connected to ground or…

I bough an Orange Pi PC set 9 which came with a camera ( https://www.aliexpress.com/item/Orange-Pi-PC-set-9-Pi-PC-and-Camera-with-wide-angle-lens-not-for-raspberry/32662572137.html?spm=2114.13010608.0.0.dIEdek ) After setting up armbian running etc. how do I do something with the camera (ie to see it works)? I have used raspberry and there I just type "raspistill -d" and a demo pops up. How do I do something like that? After browsing around I found that "modprobe gc2035" is along those lines but I only get "command not found". Doing a linux find does not find "modprobe". I reckon I have to install something else but what?

HI, On my cubietruck I can boot form sd card my filesysteme on SATA. But y can't boot form nand. I must use kernel 3.4.108 because alsa spdif pass trought do not work on 3.4.109. I can't use nand install script because it formating sata drive. here /boot : drwxr-xr-x 4 root root 16384 Jan 1 1970 ./drwxr-xr-x 23 root root 4096 Sep 6 09:46 ../drwxr-xr-x 2 root root 2048 Nov 11 15:33 bin/-rwxr-xr-x 1 root root 118912 Nov 18 2014 boot.axf*-rwxr-xr-x 1 root root 1745 Nov 11 15:30 boot.cmd*-rwxr-xr-x 1 root root 106 Nov 18 2014 boot.ini*-rwxr-xr-x 1 root root 1817 Nov 11 15:30 boot.scr*-rwxr-xr-x 1 root root 97046 Oct 14 20:33 config-3.4.1…

Gentlemen, I've spend time looking for the GPIO pinout for the Orange Pi Win I am using with Armbian. Specifically I would like to use SDA and SCL. Does Orange Pi publish some information on this subject? Thanks in advance for your information.

OPi.GPIO uses the GPIO Sysfs Interface for Userspace. I worked with the author to add Nano Pi Duo pin mappings including the built in button. The obligatory LED flasher for Duo: import time import nanopi.duo from OPi import GPIO GPIO.setmode(nanopi.duo.BOARD) GPIO.setwarnings(False) GPIO.setup(7, GPIO.OUT) GPIO.output(7, GPIO.HIGH) count = 0 while count < 20: print(count) GPIO.output(7, GPIO.LOW) time.sleep(0.5) GPIO.output(7, GPIO.HIGH) time.sleep(0.5) count += 1 GPIO.cleanup()

Hi, I always been an retrorangepi user for my Opi1. but the lastest retrorangepi is stuck at 4.1 (I try the 4.2 slim but it's too slim) and the 4.3 beta also if its named as full, lacks of kodi and many emulators. so, my thought is. What if I build my personal emulationstation + lastest kodi on top of lastest armbian? Can I install armbian and then emustation and kodi? Do I have to install all emulator one by one? or I could use retroarch? Can I setup armbian to boot emustation? I think could be a good thing also for study

Is there anyone who can give me some examples or description how to work with I/O, SPI, I2C, UART, TCP, and so on in Armbian (for example C code)?

Hi guys, I just started using the new Armbian release on my cubietruck and Banana Pi boards and encountered the following problem. On the Cubieboard the wired interface first did not receive any IP address at all. I than tried as alternative to connect the wireless interface through the armbian-config tool. Which did work fine. However the wired interface is now receiving the same IP address like the wireless one. Currently the only way to resolve this issue is by going again through armbian config tool. I am also experiencing the symptoms on my banana pi board except that it does not have any wireless interface. Which th…

Hello. There is a method to activate the VGA output in the SD image? I explain better, I want to replace the stock Debian Image that came with the Olimex Board, but the system is on a distant location where there is no computer, I need to swap the SD card and have the system booting and usign the console of the machine to perform all the remaining operation. I need to have the SD Card image that boot with VGA output, the rest of the operation coulbe done with the machine, (I nedd to configure the wifi and connet to the router and then in internet) I have read a topic that said that i nedd to modify the fex file, but this is feasible with my computer running Li…

Hello, I am using the Olimex OLinuxino and I find a constant noise at about 866.725MHz or thereabout in every board. While low, at -100dBm, when using it with IoT radios this is the band in India and it is quite a pain in applications requiring high sensitivity. This particular board had it pretty nasty at -86dB. I have tried with changing the DDR frequency as well as the CPU clock, however this nuisance refuses to go away. What can be done to get rid of this noise ? I have tried multiple boards -- Olinuxino (multiple), Marsboard, but each has some noise in exactly same band near 866MHz. Please advise.

Hello! I try to connect to OrangePiPC by serial console. I tried using UART1 (add overlay & switch console to ttyS1), UART3 (ttyS3) and ttyS0 (debug port). But always I can see output (with kernel or ) but on my host computer (ubuntu 20.04) I see login prompt and can't enter anything. I tried change speed but not login. Even when I stop serial-tty@ serivice and start minicom without luck. Can you help me?

Hi to you all. I've had a functional boot from USB flash drive on my OrangePi Zero and when I've updated kernel yesterday from main repository and reboot_ed boot stoped working. I've tried on another fully functional OrangePi Zero with same rom on it and still not working. I've tried to put new "virgin" image to USB flash drive and still nothing. Tried to erase spi and write it againe and still nothing. Any idea what could happened. I'll try today to get serial console to see what is going on during the boot proces.

It is one of the smallest board featuring H5 soc. Since it has an on-board HDMI connector, i think it would be great to have a Desktop image for this board. Other H5 /similar boards like PC2 and Prime already have various desktops available (xenial / stretch with xfce).... Do u guys have any plan to release one in the future? and thanks a lot for the tremendous amount of effort u have put into this project :)

Anyone done kivy pip on Zero? Have problem with pip install kivy. Stuck on : /usr/bin/ld: cannot find -lGL collect2: error: ld returned 1 exit status

Hello, I'm trying to set up the video streaming on Banana Pi M2. I tried all of the available images, but I can't find the image where the kernel includes ov5640.ko and sunxi_csi0(1).ko modules. The instruction on banana-pi.org said that I only need to load these two modules, but they are not included in images... The only image, where the ov5640 works is the Android 4.4 from banana-pi.org, but it is not fast enough. Do you have any experiences with that, or suggestions about how to run this? Kind regards, CottonEye_Joe

Hello, I have fresh new board from olimex - olinuxino a64, and tried to install both debian and ubuntu images, but non of them has ethernet working. I already tried to edit dtb file and incread tx-delay-ps, but with no success. Has somebody a functional dtb file for this board? Thank you for any answer!

Hi Armbians I am running mulitiple TOR network relays on Cubietruck boards (Cubieboard 3) in different Datacenters with synchronous 100 MBit/s internet connection each board (by ethernet plug) for 1- 1,5 years now. At the beginning each board could handle 25 MBit/s incomming and outgoing traffic the same time easy and 24/7. The boards are running the latest Armbian build with kernel headers installed and full firmware package. But now, as you can see here, my Cubietrucks are getting slower after time, with the network traffic they can handle via eth0: https://metrics.torproject.org/rs.html#details/EC9C4CDB403204731122C9D3FA44DFAE6…

What is the max current that the Orange Pi Plus (or other boards) can output for USB devices? Assume there is a high quality 3A power supply. For example, on Raspberry Pi it is documented here: https://www.raspberrypi.org/help/faqs/#powerReqs Note that the output amount is configurable on RPi (you must manually enable 1.2A output) - is there anything similar for OPi? Here is what needs to be changed in the boot config on an Rpi to change the power from 6mA to 1.2A: http://elinux.org/RPiconfig#USB_Power Thank you!

Hy everyone, I am desperately trying to get armbian running on a bananapi pro. By using the raw files i had no luck. Did anyone ever try wether it works at all? For me id does not even boot... Thanks

Armbian_community_25.5.0-trunk.444_Radxa-cubie-a5e_bookworm_dev_6.14.0-rc1_minimal.img use to flash android phone echerdroid apk use for flash but not flashing proper not boot

I built Armbian_5.59_Nanopineocore2_Ubuntu_xenial_next_4.17.17.img for my board, and am trying to add an overlay dtb that describes a port expander I have on i2c2. $ sudo armbian-add-overlay ./mcp23008.dts Error: dtc does not support compiling overlays Please try to install matching kernel headers

I have a number of OrangePi0. (Custom 3D printed case, 2 extra ethernets on USB. Still have some heat issues even with heat sinks) opi0F has linux-image-next-sunxi 5.92 opi0A has linux-image-next-sunxi 5.37 just because of when they were upgraded. mcr@opi0A:~$ ls -l /lib/modules/4.14.7-sunxi/kernel/net/ipv6/ip6_gre.ko -rw-r--r-- 1 root root 21556 Dec 20 2017 /lib/modules/4.14.7-sunxi/kernel/net/ipv6/ip6_gre.ko root@opi0F:~# ls -l /lib/modules/4.19.62-sunxi/kernel/net/ipv6/ip6_gre.ko ls: cannot access '/lib/modules/4.19.62-sunxi/kernel/net/ipv6/ip6_gre.ko': No such file or directory Is there some reaso…

Hey guys, first off, I'll make no bones about it... I'm an absolute noob. But I wanna learn! So I have the OPi PC and I purchased this 7" HDMI USB touch screen Now, I've plugged it all in and the screen worked fine right out of the box but the touch did not. I've verified it's working by plugging it into my desktop and everything worked great. I can only assume that it's not working due to a lack of drivers. The screen came with a CD that contained the screen drivers but not the touch drivers. It also came with a handful of RPi distros with the drivers preinstalled. But nothing for OPi Can anyone offer some suggestions?

Flashed the latest Jammy 5.15.48 image and the device went offline After connecting to HDMI I found out that RTL8188EUS is no longer available. Previous Focal image worked fine in headless mode with a `0bda:8179` dongle. Anyone knows why the driver has been removed? Thanks

Hello , I have a Adafruit TFP401 HDMI/DVI converter module. On my orange pi pc plus with Armbian kernel 3.4.113, i changed resolution to 800x480 on script.bin file and screen doesn't fit, it has margin from left. anyone help me ? Module https://learn.adafruit.com/adafruit-tfp401-hdmi-slash-dvi-decoder-to-40-pin-ttl-display/overview Screenshot http://hizliresim.com/yEAaoy

Hi there, I've received 4 NanoPi Neo (with heatsinks as suggested by @tkaiser) recently. Here is my my first impression and also I've come across some minor issues. I hope It would be useful. I've installed Armbian_5.27.170403_Nanopineo_Ubuntu_xenial_dev_4.10.3. Also tried dietpi (kernel 3.4) and h3-mainline-ubuntu-core-qte-sd4g-beta-20170228.img (FrendlyArm, kernel 4.10) So far for good. Armbian works like a charm I have been able to install Docker and I've performed some simple tests. Awesome job guys! I've found one issue so far MAC address changes at every reboot. The issue was mentioned in some threads on the …

I encountered a strange problem and I do not know what to do: When I am restarting my OPI with inserted USB audio card, then LIRC does not work. When I am restarting my OPI without inserted USB card and this USB card I put only later after a restart, then LIRC works. Can anyone advise how to proceed? I need to insert USB audio card permanently (it's inside the device).

I have a Orange PI PC Plus that isn't booting either from sd or emmc. I had really messed up some configuration, so I erased emmc. After I erased EMMC, I started to get this boot screen. https://photos.app.goo.gl/EbJX43eSATyqTEau8 If I insert a sd card in with the latest Armbian, I get no boot screen, or activity at all. In fact, even if I format the card, and insert it into the OP+ it gets no boot activity. It is only after that I remove the card that it can then boot from usb flash. I ended up writing the latest orangepiplus image to a usb flash drive, and am able to get it to boot via a flash drive. I did backup my microsd install a …

Orange pi zero using mainline latest image. Somehow i couldn't manage to set up a c++ project with libusbgx so I am using console commands for gadgetfs for hid device emulation. I want to disable otg dual role functionality of micro usb port . I think i need to mess with overlay but i have no experience and i think i should change the usb for micro usb port but i am not sure how to do. Removing usb otg descriptor is enough too. Thanks

Normally when you have installed a XFCE-Desktop image for the Pinebook A64 you could set the display brigthness with the following pkexec command to a readable higher level - like I did in the past (possible brightness values are 1-10 - on startup this is only set to 2): pkexec /usr/sbin/xfpm-power-backlight-helper --set-brightness 8 read-out command for the current value: pkexec /usr/sbin/xfpm-power-backlight-helper --get-brightness but on standard CLI-install pkexec and xfpm-power-backlight-helper are missing, so to use this command-line (in /etc/rc.local) you have to install these 2 packages: sudo apt install xfce4-powe…

Hi, I could enable "spidev" support by armbian-config -> system -> hardware (enable spidev) . Everything worked fine. However, the original spidev module supports messages only up to 4096 bytes. I compiled a new version of custom spidev.ko with the 32,768 buffer size. Then, converted it to spidev.ko.xz ( xz -v spidev.ko) and replaced the original file under /lib/modules/5.15.85-sunxi/kernel/drivers/spi/spidev.ko.xz The new module works fine when I install it manually: insmod /lib/modules/5.15.85-sunxi/kernel/drivers/spi/spidev.ko.xz However, after the reboot the original 4096-byte version of "spidev" module is loaded magically.…

LED link on WAN port ON when disconnect cable link ( not change to OFF, always ON). Help me how to fix the problem

Kernel crash on freshly installed image for LonganPi 3H. Image downloaded from: https://www.armbian.com/longanpi-3h/ Ubuntu 24.04 Noble. Sometimes it will crash few seconds after boot, before logging or doing anything. Didn't install or do anything, just apt-get update and upgrade. logs: https://paste.next.armbian.com/ocofepenup [ 1511.118664] Internal error: Oops: 0000000096000044 [#1] SMP [ 1511.124251] Modules linked in: sunrpc rtl8xxxu mac80211 cfg80211 sunxi_cedrus(C) rfkill libarc4 v4l2_mem2mem videobuf2_dma_contig videobuf2_memops videobuf2_v4l2 videodev videobuf2_common polyval_ce sun50i_h6_prcm_ppu mc polyval_generic dump_reg cpufreq_dt zra…

Hi! I have an OPiPlus2, the official product page says that the soc runs on 1.6ghz, but the cpufreq-info says it's hardware limited to 1.3ghz, so what now? Thanks in advance and sorry if I miss something!

Hi everyone, What I want to do is to use a DS18B20 through 1-Wire to read temperature on an OPi Zero. The sensor seems to be detected by the board (I see the file under /sys/bus/w1/devices/28-something), and then it disappears randomly after a reboot or a power cycle. (file goes away and obviously I can't get any readings). Then it starts working randomly again after an indefinite amount of reboots. I'm having this problem for a while now, and it's driving me absolutely crazy. This one here on the picture is the sensor I'm using. I have attached a 4.7K Ohm resistor between the VCC and Digital cables, and attache…

Hi everyone, i bought an OrangePI PC Plus as a Lab computer to google stuff and watch Youtube. I tried Debian_stretch_next_desktop_nightly.7z, nice desktop, but i figured that compiling the mali driver is a pain. Then i tried Debian_jessie_default.7z, installed xfce4, modprobe mali works out of the box but i seems like X11 doesn't utilize that. So how do i get youtube going smoothly in the most painless manner? Thanks a lot!

Hi. I'm looking for your kernel sources 3.4.113 with Mali400Mp driver. Is there a repo where I can download it or I have to patch myself the sunxi-v3.4.104-r0 kernel. In case there is no repo and I have to do this myself could you please tell me if my approach is correct for cubieboard2 and cubietruck3. 1) Download the sunxi kernel 3.4.104-r0 2) Download the armbian sources 5.24 3) Patch the kernel 3.4.104-r0 using lib/patch/kernel/sun7i-default files Did I forget something ? It would be so much better if I could download your full patched kernel 3.4.113 with Mali400MP driver. I am far from being an expert in this work. Thx

Hi all, I just downloaded the Armbian(5.36 xenial-next)-based image for BPI M2 Zero, that comes with kernel 4.14.3-sunxi. I'm looking for kernel headers for this kernel, but I can't find it in armbian's repo. Could you help me to retrive them? Thank you!

hello i just install the latest armbian on orange pi pc2 board, the kernal is already 4.14 therefore the OTG function should be there. root@orangepipc2:~# dmesg |grep musb [ 1.323924] musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver [ 1.323939] musb-hdrc musb-hdrc.1.auto: new USB bus registered, assigned bus number 9 [ 1.324416] usb usb9: Manufacturer: Linux 4.14.78-sunxi64 musb-hcd [ 1.324421] usb usb9: SerialNumber: musb-hdrc.1.auto however, i cannot enable the usb serial over OTG. anyone can show me how to do it? i tried it on debian and windows but both has nothing when i connect to the OTG port. thanks very mu…

Hello, I am trying to use my NanoPi neo Plus 2 rev 1.2 board as KVM with help of (kvmd-armbian) and USB-HDMI capture card and USB-A to USB-A cable as OTG for emulation of Keyboard and mouse as HID. I discoverred that If I install "Armbian 23.02 Jammy with Kernel 5.15.y" like the install script from srepac/kvmd-armbian recommends, updated it and installed the srepac/kvmd-armbian piKVM, it installed properly and it is working BUT to my OTG USB HID connection to work I had to convert sun50i-h5-nanopi-neo-plus2.dtb to sun50i-h5-nanopi-neo-plus2.dts and in there find "dr_mode" and change it to peripheral (or otg) to get my HID OTG input to work w…

Armbian Legacy 5.56 Kernel 3.10 boots and installs to the eMMC (as long as ext2fs is picked). Armbian Dev 5.56 Kernel 4.19 does not boot from the SD Card at all (power LED and black screen). I don't have the serial console adapter (yet) so I don't know if there is something useful there.

I tried to build the wirguard module but it seems to fail on cubietruck (Armbian 5.31) # cat /var/lib/dkms/wireguard/0.0.20171127-1/build/make.log DKMS make.log for wireguard-0.0.20171127-1 for kernel 4.11.6-sunxi (armv7l) Sat 09 Dec 2017 11:51:26 μμ EET make: Entering directory '/usr/src/linux-headers-4.11.6-sunxi' LD /var/lib/dkms/wireguard/0.0.20171127-1/build/built-in.o CC [M] /var/lib/dkms/wireguard/0.0.20171127-1/build/main.o /bin/sh: 1: ./scripts/recordmcount: not found scripts/Makefile.build:294: recipe for target '/var/lib/dkms/wireguard/0.0.20171127-1/build/main.o' failed make[1]: *** [/var/lib/dkms/wireguard/0.0.20171127-1/build/main.o] Error 127 …

Hi, I have problems with NanoPi NEO on Allwinner H3 due to sudden sporadic Linux kernel overheating shut down. I'm using the Linux kernel 4.14 on Debian Trixie. The syslog shows: The hours before, the kernel shows above 80°C by: But there is not much load on it. When looking to "top" I see less then 10% as load average and more then 90% idle. "iotop" shows all processes <1%. And when measuring the chips, all are cool at below 40°C It looks like the CPU suddenly get into a hot-state above 80°C, because it stays there for hours independent from the process load. Even after a reboot command, the system comes up again and is still above un…