Allwinner sunxi

Is there any way to change brightness settings on CAM500B? I can't get clear images fswebcam. Using nanopi neo air with CAM500B and Ubuntu core. :~# v4l2-ctl -l error 25 getting ctrl White Balance, Automatic error 25 getting ctrl Exposure error 25 getting ctrl Horizontal Flip error 25 getting ctrl Vertical Flip error 25 getting ctrl Color Effects Thanks

I have two Olimex Lime 2 eMMC boards, both set up the same way – same HDDs, same batteries, same power supplies, etc. Both run: - Armbian 5.31 (although one was updated to it, and the other was freshly installed with that version) - Debian 9 “stretch“ (same issue when they were both on Debian 8 “wheezy” though) - Linux kernel 4.8.14-sunxi Yet, one shows the CPU temperature, and the other doesn’t. A (the fresh-installed one): cat /sys/class/thermal/thermal_zone0/temp 41800 B (the one updated to 5.31 from a previous 5.x version): cat /sys/class/thermal/thermal_zone0/temp cat: /sys/class/thermal/thermal_zone0/temp: Inv…

Hi Sometimes after heavy disk writes like disk speed test (iozone) or database writes or install new packages the file system get read only and I not able to run any command even reboot and I have to disconnect power. My pi is a orange pi pc (H3) and I installed a relatively cheap micro sd card on it.

Hello We are using NanoPi M1 board for robot application.So I am trying to install Ubuntu 16.04 LTS. I want installation procedure for Ubutu. In nanoPi M1 manual they mentioned only for Windows OS. If anyone knows procedure please help me.

Hi armbian users, I would like to know if it is possible to compile a own version of armbian with the following packages git nginx php5-json php5-fpm php5 so I can run Linux-dash on my cubietruck. This is the guide I am using to install linux-dash Set up linux-dash on Debian, Ubuntu or Linux Mint http://xmodulo.com/monitor-linux-server-desktop-remotely-web-browser.html …

I've read many posts here and understand the OPi0 wireless chip isn't very well liked. I'm trying to setup hostapd with both client and AP functionality. I can get AP working only if I dedicate wlan0 to it. It seems that virtual devices (eg iw dev wlan0 interface add uap0 type managed; ip link set uap0 up) don't work with the current jessie image, making it impossible to have both AP and client simultaneously. I'm happy to help with testing the driver, but I'm no expert and certainly not knowledgeable enough to code this sort of stuff. If there's any help to be had, I'd be grateful.

My new Orange Pi Lite can't connect to WiFi networks through internal WiFi adapter (RTL8189FTV) It tries to connect (putting interface...) then very long validating authentification and "Bad password"! But password is right! I tried two WiFi networks with different passwords, but Pi always showed "bad password" Both networks have WPA2-PSK security I set up WPA1/2 hex the WPA2 passphrase but it gave nothing! Please, help me! (Running latest Armbian (3.4 kernel)

I have an Orange Pi PC with the Allwinner H3 processor running the latest 5.20 version of Armbian. I am unable to successfully connect to a Wireless access point because as soon as the status of connection is "Obtaining IP address" the Orange Pi PC crashes and reboots. I have tried this with both a reputable Edimax wifi dongle and a cheapy wifi dongle with the same results. I can have them plugged in and the OPi and it will run fine but as soon as I try to connect to a wireless network, it crashes. I have the OPi PC connected to a variable power supply capable of 3A and it isn't getting anywhere near that. So my 5V isn't a problem. I have updated and upg…

I'm using wiringPi installed from here, it works fine for the most part but when I try loading spi it throws the following error: modprobe: FATAL: Module spi-sun7i not found in directory /lib/modules/3.4.113-sun8i gpio: Unable to load spi-sun7i FYI: I'm using Armbian 5.31

Hi all, I build Armbian for my NanoPi Air with both Linux 3.4 and Linux 4.X, and config usb to be an USB Ethernet Gadget but it does not work with Linux 4.X. There is nothing showing when "dmesg | grep gadget" on Linux 4.x But in Linux 3.4 I got following messages: root@nanopiair:/# dmesg | grep gadget [ 2.559263] g_ether gadget: using random self ethernet address [ 2.565929] g_ether gadget: using random host ethernet address [ 2.582905] gadget_is_softwinner_otg is not -int [ 2.582923] gadget_is_softwinner_otg is not -int [ 2.583012] g_ether gadget: Ethernet Gadget, version: Memorial Day 2008 [ 2.590546] g_ether gadget: g_ether ready [ 13.…

Hi, What are the boot priorities on the Orange Pi Zero 2+ H3 / H5 boards? In case of a working eMMc boot, is it possible to prohibit any boot through SD? Thanks /R

First of all sorry for my bad english and maybe a newbie question. Board: BananaPI M1 when I login I get this: ARMBIAN 5.31 stable Debian GNU/Linux 8 (jessie) 4.11.5-sunxi CPU temp: 29°C HDD temp: 27°C Usage of /: 9% of 15G storage/: 1% of 688G I installed armbianmonitor with the command armbianmonitor -r I had no problems to put disk capacity and monitor services for samba and transmission. But I can´t find the way to get the disk temp into rpimonitor, the graph show "undefined" This is my temperature.conf in case was useful ##########################################…

opi+2e What is the best way to install a mainline kernel so that I can check out containers? I tried to install mainline kernel and ended up with a blank screen I then installed a nightly and it is just cli so I installed open box by ssh root@10.x.x.x9 apt-get install openbox obconf and now i get a blank screen also what is the best way to get a gui with mainline kernel? Thanks for your help Dave

Hi Sorry my english and my ignorance in linux I'm trying to activate hostapd on orange pi light. I think realtek driver. Nework appairs, but i cannot associate, it says wrong password (12345678) iwconfig has not password item: Spoiler iwconfig lo no wireless extensions. br0 no wireless extensions. wlan0 IEEE 802.11bgn ESSID:"ARMBIAN" Nickname:"<WIFI@REALTEK>" Mode:Master Frequency:2.432 GHz Access Point: 2E:98:51:56:D5:65 Bit Rate:72.2 Mb/s Sensitivity:0/0 Retry:off RTS thr:off Fragment thr:off …

Hello ppl. I have an Orange Pi Zero, and I have some issues using UART interface, it give me an output like this: ▒▒▒I▒%E▒Y=7▒g!=7▒Y=5▒[s▒i-''▒Y-9/▒Y=▒▒▒RrR▒▒▒V▒▒ ▒▒▒I▒%E▒Y=7▒c5!e=#=15Q=-▒a#'-#5▒▒▒RrR▒▒▒V▒▒ ▒▒▒I▒%E▒[5=9/57▒=5▒c5!-▒a'▒7==;=5▒57=5%!#▒▒▒▒▒▒▒▒▒▒▒▒▒▒]▒m]▒▒▒▒gY{▒▒}=9/5▒▒5;▒5▒▒▒▒▒▒▒▒▒▒▒▒▒]▒m]▒▒▒▒gY{▒▒}7=#957▒muuu▒▒▒▒▒▒▒▒%=#=15%5#▒7=5%!#▒▒▒▒▒▒▒▒▒▒▒▒▒▒]▒m]▒▒▒▒gY{▒▒7-)▒5%5▒%!#-!▒7=5%!#▒▒▒▒▒▒▒▒▒▒▒▒▒▒]▒m]▒▒▒▒gY{▒▒Y=cW_▒7=5%!#▒▒▒▒▒RrR▒▒▒V▒▒ ▒▒▒I▒%E▒Y=7▒▒59▒▒'!9='▒y▒▒▒R▒%I▒▒▒▒%▒▒ai▒▒▒I▒%E▒Y=7▒gY{…

Haaaa no one understand what i doing... Product i have : - Orange Pi Zero H2+ x2 - Orange Pi Pc Plus H3 First Orange Pi Zero H2+ i received is dead (boot but nothing) Second Orange Pi Zero H2+ boot but problem to access via network on debian jessie problem with ethernet driver i guess I'v surrender the Orange Pi Zero and i'v buy the Orange Pi Pc Plus H3 with EMMC, i have downloaded the last image of debian jessie on armbian for my Orange Pi Pc Plus H3 Orange Pi Pc Plus H3 boot everything ok with lastest debian version of debian jessie exept ETHERNET so i'v try to build my own rom with the armbia…

I'm having trouble getting the RaZberry zwave extension board working in Armbian 5.31 with the mainline kernel. Previously on Bananian I just symlinked ttyS2 to ttyUSB99 and I was able to use the RaZberry with OpenZwave. But now, I have no idea how to get it working. I guess it has got something to do with overlays for the kernel but I haven't been able to find out exactly sifting thru the internet... Help very much appreciated.

hello guys ! I have a big problem which I'm not able to solve . It makes me crazy .... I have an orange pi plus 2 and I have changed the antenna , more powerfull. I'm new with linux and armbian . At the moment I can connect my orange to my router via lan cable and connect it over internet to update and upgrade Armbian and else. Using graphical wicd I can connect it to my home wifi network after put the psw .In this case orange pi is a client. Pratically the wifi on board is working , I mean , because it scans and it lists all of the wifi network reacheables around . But my target is to create an access point with my orange pi . After some weeks I'm watching seve…

Hi there, I have problem with recovering "sudo h3consumption -m 1200 -c 4" on Orange Pi Zero, where it activates just 2 cores. No idea why. When I used "sudo h3consumption -m 900 -c 1" it worked fine, but now, when I am trying to recover all 4 cores it activates just 2 cores. Which files h3consumption changes? (so I will be able to backup them with clean install and the restore them once needed to recover settings for all 4 cores). And I found out, that with "sudo armbianmonitor -m" it shows CPU changes 900Mhz, 1018Mhz (dont remember exact values) but now it just shows 480 P.S. I made backups of these files: sudo cp /etc/backup_2017_05_21…

What do I have: SoC: Orange Pi+ 2 http://www.orangepi.org/orangepiplus2 CPU: H3 Quad-core ARM Cortex-A7 https://en.wikipedia.org/wiki/ARM_Cortex-A7 OS: Armbian Ubuntu Xenial https://www.armbian.com/orange-pi-plus-2 Audio subsystem: PulseAudio Problem: Test video HTML5 H.264/MP4: https://www.quirksmode.org/html5/tests/video.html Firefox: video is played fine, but audio – NOT: white noise only. Youtube on Firefox: one part of clips is played fine, second part of clips: video is played fine, but audio – NOT: white noise only. Naturally, second part of Youtube clips have format H.264/MP4. However: Chromium: ALL Youtube…

I've been playing with remote desktop from windows 10 to my orange pi plus 2e, finally got it working correctly using this forum tightvnc and xdrp . i was having trouble with it send all commands to the main user instead of the current remote session. the symptom of that was chrome didnt seem to work remotely, but when i checked the main screen many chrome windows were open. so i uninstalled vino, tightvnc, etc. and reinstalled tight and xdrp voila! ok so now chrome opens correctly so i went to test youtube which seemed a bit slower.. redraw etc. and no sound! so now my question is - does this remote setup support sound ? I have heard you can't watch movie…

Hi, Has anyone succeeded into making the SPI lib working for OPI Zero, i'm having dificulties in using the SPI module, the gpio load spi command does not work either. Thanks.

I got my OPi PC2 last week and flashed the latest armbian server version. Every time I enter "reboot" on SSH to reboot the system, or plug in the power cable. The system can not boot up with a great probability. My power source is the charger for SAMSUNG smartphone. The specification indicates it can provide 5V/2A current. With the UART, I found the uboot process was stuck after the statement "INFO: BL3-1: Next image address: 0x4a000000, SPSR: 0x3c9". The LED is OFF in that moment. After plugging out/in the power cable multiple times, the system can be boot up successfully finally and works very well. I'…

Hello, I'm trying to boot an Orange Pi Plus with Armbian 5.20, and it does not work. I've already check that both OPi and my sdcard work fine, because I can flash and boot the images on orangepi.org site. Besides, I checked how u-boot starts with both Armbian and "debian server" orangepi.org image (both attached)

USB audio is not usable with 4.x dev kernels on OPI Zero board. I don't see any errors, but audio goes with scratchs. Other usb devises works fine with 4.x dev. USB audio works well with 3.x stable kernel.

Hi All, My first topic here, I own a Banana Pi M1 and I have just switched from bananian. Everything looks great in armbian and most of the things are just working, I just miss zsh from bananian but that was easy to fix. However I use my server for backups using ecryptfs (so I can encrypt/decrypt folders on demand) and I'm unable to mount any ecryptfs directory. My configuration: Banana PI M1 running Debian Wheezy mainline kernel 4.4.3 (just installed) Things I've done: Install ecryptfs-utils (installs ok and tools are available) Try to mount a ecryptfs directory: I get the message "unknown filesystem type ecryptfs" Try to load as a module (just in case):…

The guy just added a raspberry pi build to the server builds. I tested it and it works on Orange Pi Zero 512MB. There's a little lag, but I think it's playable. It's a really fun game, you should check it out: http://www.files.froemling.net/bombsquad/builds/

Hello guys, I'm just starting with bash scripts and the bananaPi, and I'm curious how the developers came up with the value of RAM usage, and why in the welcome script that loads when I login to SSH, the RAM usage is different from the command free -m ? I don;t really understand the line about memory_usage I just noticed the result is different from the free -m Thanks # memory and swap mem_info=$(LANG=en_US.UTF-8 free -w 2>/dev/null | grep "^Mem" || LANG=en_US.UTF-8 free | grep "^Mem") memory_usage=$(awk '{printf("%.0f",(($2-($4+$6+$7))/$2) * 100)}' <<<${mem_info}) memory_total=$(awk '{printf("%d",$2/1024)}' <<&l…

Hello! I'm running CB2 board as home server for a long time and after recent upgrade I've got an issue with LXC container. LXC container has "Ubuntu" inside and provides TOR functionalty + access point via connected USB wifi. USB adapter passed to container like this: lxc-wait -n tor -s RUNNING lxc-device -n tor add wlan0 I'm not using it recently, but recently I found, that after connection to AP nothing happens (no internet, DNS servers are IPV6 :)) and host system (CB2) is completely frozen. After reboot I've connected via SSH and retried to connect to access point - again freeze, and screen is populated with this: …

Hi, I'm Rosario and I'm a new Armbian follower. I liked it. After months using my OPI Plus2 with Ubuntu Jessie Loboris image (and installed it also on emmc) I decided to install Armbian. I need to say last time I installed OS on emmc I received an error. Erase was fine but copy of last jessie Image no. After that I Installed Armbian Image with no problem and after some reboot OS run up fine. I downloaded last Armbian Image (3.4.112 kernel version). Now, when I try to use emmc I receive some error. First of all seems it's missing. I see only mmcblko (my SD card). emmc doesn't exists: root@orangepiplus:~# cat /proc/partitions major minor #…

Hello all, I bought this OPZ, it was cheap and I was curious. Primarily for a yet-another-headles-server-without-wifi. I am used to different hardware and Debian since "the days You compiled Linux kernel in just 48 hours". I read quite a lot about OPZ and different OS solutions - You have quite a few weeks before You get Your parcel from China to Your mailbox in Sweden. My first SD card I bought from China, it was Kingston 16GB class 10 an all of that. Worked like charm in couple of hours then after reboot it was unreadable. I spent days in search for solution, tried to reformat it in different ways on different machines and using different OS and software combination.…

Hey there,I am having trouble with SPI on my Banana Pro. I am trying to access the SPI interface via WiringPI (the Lemaker Banana Pro version). But whenever I try to access it, it tells me: Unable to open SPI device: No such file or directory The message is correct, as there are no /dev/spi* files present. The question is: How do I get them?(according to http://linux-sunxi.org/Linux_mainlining_effort#Status_Matrix it should be available since 3.15)For the 3.4.x, one had to load modules (spidev, etc.) but this doesn't seem to work for 4.9.x. There is a 'spidev' module which loads fine (according to lsmod) but with no recognizable…

I want to use an ADAU1979 with an olimex A20-Micro. Needs to show up as a device in ALSA, alongside the in- built CODEC - As far as I can see, this driver is in mainline kernel but I have no idea how to configure the kernel build to include it. Obviously we need to tell the system where its i2s/SPI interface is connected etc. Unsure which kernel version (legacy or mainline) to begin with. We do need a desktop environment and the olimex 10"/7" LCD to work also... I am starting this from a position not having built a kernel or kernel modules before so If this idea is a non-starter, someone please tell me so. Thanks.

Hi, I was just wondering if anyone else out there with a Win+ has this issue .... when I install from an image file all works well, WIFI etc all good. But when I upgrade the install wlan0 etc has gone. ifconfig doesnt show it, lsmod shows the brcmfmac/cfg80211 I've tried it with a few of the recent image files systemctl status systemd-modules-load systemd-modules-load[1693]: Failed to find module 'lp' systemd-modules-load[1693]: Failed to find module 'ppdev' systemd-modules-load[1693]: Failed to find module 'parport_pc' root@zoot: lsmod Module Size Used by ipt_MASQUERADE …

Hi! I have ARMBIAN 5.31 on my Banana Pi m1 and need some help. Early I used wheezy and mount webdav disk with davfs2 in fstab, but after I installed jessie fstab dont mount any davfs2 disk. Besides I have another problem: I use davfs2 to backup some video and photos to cloud storage throw webdav, and I have mistakes on large files (files much bigger then free space in /var/cache). Davfs2 send files in cache folder first (/var/cache/davfs2 by default) and then to webdav disk, so I have to use another disk with enough free space (sda1 in my case). When I was on wheezy I just point cache dir to sda in dafs2.config (cache_dir option) and all be OK, but i…

Hello, I'm trying to install Armbian to my Orange Pi Zero. I tried stable (5.30), dev (5.30 and old (5.24 from January 2017) versions of Debian and stable version (5.30) of Ubuntu. They all have the same problem. I log in from ssh using root/1234. Then I get prompted for password change. I enter the old password, new password twice, then I get logged out without any error message. When I try to login again, the password is unchanged and same prompt screen. I tried to write the images to my sdcard using dd, gnome disks, etcher. dd was not working at all, but the others have the problem I mention above. I was worried if my sdcard is not s…

Hello, I bought Orange Pi Plus 2 and I have a banana router r1 on both devices I installed armbian it works good but I need just server + nginx + lua could you please help me, how to reduce the size of installed OS because 1.6Gb its too much Thank you

Hey all, Sorry for the noob question, I posted this in another topic but it hasn't seen any action so I thought I would make a post. I have an Orange Pi PC, using the RetroOrangePi build which is based on Armbian. I'm having overscan issues on my 720p TV. I checked the options on the PC, there's no way to fix it there. They figured it out in this topic here (where I initially asked this question): The solution is to add code to u-boot in order to solve the overscan, or edit boot.cmd. My question is, will using u-boot be the best solution, or is it better to edit boot.cmd? Do I simply create a boot.cmd in something like note…

OrangePi plus2e how do I get hardware acceleration to work in smplayer? I am recording tv using tvheadend and trying to play back using smplayer. I have tried the available options for video output driver and X11 (slow) is by far the best but is not useable as there is still alot of stuttering. top shows 138% mpv usage vdpau is colored almost horizontal lines All help is appreciated Dave

Hi after half a year using orangepi PC have upgraded system and it hangs when compiling headers.... After that have to reformat sd card and installed last version of armbian and the problem still remain when try to upgrade it... fresh system... đ then apt-get update root@orangepipc:~# clear root@orangepipc:~# apt-get update Hit:1 http://ports.ubuntu.com xenial InRelease Get:2 http://ports.ubuntu.com xenial-security InRelease [102 kB] Get:3 http://ports.ubuntu.com xenial-updates InRelease [102 kB] Get:4 http://apt.armbian.com xenial InRelease [14.1 kB] Get:5 http://ports.ubuntu.com xenial-b…

Hi All Please can someone assist me. I'm at my wits end here. I have an Orange Pi Lite running Armbian 5.30 desktop edition. I want to rotate the display 90deg. I have had no luck with xrandr as it lists the display as 'default' and not a specific output and this seems to cause a problem. The option to rotate the display is also not available in the display manager. Thanks in advance.

I installed Armbian 4.5 Debian Jessie 3.4.109 and added XFCE desktop, but there is no audio on 3.5 jack (I cannot test HDMI audio output). I built my own Debian Jessie 3.4.109 selecting Banana Pro and including XFCE desktop without any other change, and also in this case there is no audio on 3.5 jack. Some useful information to solve the problem. These are equals on both installation. root@bananapipro:~# cat /proc/asound/cards 0 [sunxicodec ]: sunxi-CODEC - sunxi-CODEC sunxi-CODEC Audio Codec root@bananapipro:~# cat /proc/asound/devices 2: [ 0- 0]: digital audio playback 3: [ 0- 0]: digital audio capture 4: [ 0] : control 33: …

hi Both the last img based on ubuntu for orangepi 2 and orange pi plus E doesnot run. LED doesnot light. Normaly i used old armbian img based on jessie 5.25 ( plus E ) nad 5.05 ( orangepi 2 ). It works. I download the new ones but nothing happend - black screen only...

Hiya, I'm attempting to use Wifi on the Banana Pi M1Plus board, supposed to be a Banana Pro clone from SinoVoip, but I cannot get the wifi module working with the latest Armbian 4.5, Jessie kernel 3.4.109. I have already linked script.bin to the /boot/bin/bananapro.bin file I try loading the ap6210 module and it gives errors. root@bananapi:~# modprobe ap6210 <3>[ap6210] parse wifi_used failed in script.fex. <3>[ap6210] bluetooth is disable in script.fex. <3>[ap6210] [dhd_module_init] get wl_host_wake gpio failed modprobe: ERROR: could not insert 'ap6210': Operation not permitted Thankyou for any help Lemonzest

Hi. I've got a Orange Pi Win Plus flashed with armbian, everything is running great, except the bluetooth module. I have everything installed, but blueman keeps telling me that no adapters are found. I've checked if the bluetooth adapters were on with the command 'armbian-config', as well as trying to stop and restart it with '/etc/init.d/bluetooth stop and start'. I start to feel like it won't work on linux, because I've already tried debian and ubuntu from the orangepi downloads page and the bluetooth didn't work too. I don't want to run Android just because of this issue. Any ideas?

I need help i won´t only make an update on cubietruck and bpi-r1 to the last version 5.25 or 5.27 not more. I make apt-get update and apt-get upgrade then i have 5.31 i won´t only 5.2x. Gives an way for an update to 5.2x sorry for my poor english

Good afternoon. I have an Orange Pi One and I need to achieve the maximum boot speed. The ultimate goal is a kiosk mode and the only application on the QT. The network is not needed. The simplest way will probably be to change the run level to the single mode, but with this there are problems. Any tips, suggestions, experiences?

Hello everyone, As I was looking for to see the cause of not having any free memory left on this BananaPi, I found out that Clamav daemon is using all the free memory (44%), after stopping the service I could again see more free memory. The clamAV was installed I think when I installed apache, mysql using the provided scripts (softy). Is this a normal RAM usage for ClamAV ? Also please can you tell me what I could do to optimize mysql for a low resource server as this, I can see alot of mysql proccesses runing Than k you.

I wanted to new install my Cubietruck with the new Jessie images. But how can i install to boot from Nand and SSD. Can´t find nand.install.sh Is this gone? Why? Thx Thomas

Dear community. I like to get the NanoPi Neo air work as HID Gadget using libcomposite. I am using the dev kernel (4.10) and libcomposite is loaded. Following this tutorial http://isticktoit.net/?p=1383 the usb gadget init script is running without errors on startup. But there is no entry in /sys/class/udc/ and i get no /dev/hidg0 device Did i missed something? is there a special overlay directive for the usb controller? or is something missing in the kernel? is it better to use the g_hid module?

Whats the suitable image for Orange Pi PC H3 Quad-core ( https://www.banggood.com/Orange-Pi-PC-H3-Quad-core-Learning-Development-Board-p-1010455.html )? Thank you!

I was hoping I could find some information as to why linux-jessie-root-next-bananapipro was being held on my BPi Pro system. The kernel and u-boot packages have been upgraded. I've held back on updating linux-jessie-root-next-bananapipro because I'm concerned it would break something. Is there some log file I should look at or some documentation somewhere?

Hello all, I'm working on a project where I need at least 460800 baud on a UART on the NanoPi Neo Air. Works great at lower baud rates but can't seem to get it much faster than 115200. Any thoughts on clock adjustment or CPU speed? I'm using Armbian 5.24 with the 3.X kernel

Hi, admin. I installed Mainline 4.9.12-sunxi on my cubieboard 2. Since the Mainline kernel doesn't have Mail driver and hardware accelerated video decoding, I want to downgrade the kernel to Legacy 3.4.113. If I don't want to reinstall the whole system, is there anyway to replace the kernel with the old version? Many thks!

Has anyone been able to successfully install rpimonitor on an Orange Pi Win Plus (A64)? I have been able to install it, but I get a lot of invalid readings. As you can see in the screenshot, it is not able to detect cpu frequency, vcore and temperature.

Hello everyone and thank you for wonderful work on Armbian. i was wondering if anyone has any experiences to share on booting orange pi pc over network, i know it's possible to do this using Raspberry pi, but what's the latest status on Orange PI PC? is there a u-boot build capable of doing so? is this even possible?

Funnily with Zero Plus 2 a silent downgrade to H3 happened (I would assume that's related to Xunlong's software guy Buddy not being able to resolve voltage regulation issues with Allwinner's BSP and H5): http://www.cnx-software.com/2017/03/17/18-9-orange-pi-zero-plus-2-board-allwinner-h3-wifi-bluetooth-le-hdmi-and-8gb-emmc-flash/

hi all I'm the owner of a Cubieboard1 (A10) running Armbian 5.31 Debian Jessie, kernel 4.11.5 (recently upgraded) I'm not quite sure when it happened (normally it stays up&running continuously), but recently I needed to reboot it and it simply shuts down, with no subsequent boot I've tried multiple times, upgraded the kernel, tried both via GUI and trough cli,.... no way: it simply stops, and I need to push the power on button I've not been able to find any glimpdr on the logs Obiouvsly it is quite annoying, especially for remote management Do you have any idea on the possible causes, troubleshooting etc…

Hello, I'm running ARMBIAN 5.25 stable with kernel 4.9.12-sunxi on my Cubietruck and I mostly use it as an AP. I've installed the "hostapd" package from the official armbian repository and it works fine until I want to connect more than 5 wireless clients. The kernel module used is "brcmfmac" provided by the armbian-firmware package. Is it an hardware limit and how can I bypass it if possible ? The working default config provided with hostapd package is below: ssid=ARMBIAN interface=wlan0 hw_mode=g channel=5 driver=nl80211 ctrl_interface=/var/run/hostapd ctrl_interface_group=0 logger_syslog=0 logger_syslog_level=0 wmm…

hi there, i'm quite new on arm, so apologize for my stupid questions. i'm trying to compile example in wiringOP lib. but i got error: zero@orangepizero:~/WiringOP/examples$ gcc -o blink blink.c -lwiringPi //usr/local/lib/libwiringPi.so: undefined reference to `pthread_join' //usr/local/lib/libwiringPi.so: undefined reference to `pthread_create' //usr/local/lib/libwiringPi.so: undefined reference to `pthread_cancel' collect2: error: ld returned 1 exit status i'm running Xenial legacy on orange Zero. can someone help me please?

Hello, My Opi+2 somehow blocks internet when i turn it on. Even though it is not connected on ethernet port. Then i disabled wifi. Everything seemed fine at first, but as because of i need internet and the wifi is disabled, i had to use ethernet port. When i plug ethernet cable to the opi+2, the modem's internet connection drops. I don't have any ideas about why it is happening. Here is the modem log: Spoiler Jan 1 00:00:08 syslog emerg BCM96345 started: BusyBox v1.17.2 Jan 1 00:00:08 daemon notice kernel: Linux version 2.6.30 (root@localhost.localdomain) (gcc version 4.4.2 (Buildroot 2010.02-git) ) #4 Wed Jun 15 15:00:07…

I'm currently running ARMBIAN 5.31 Debian GNU/Linux 8 (jessie) 4.11.5-sunxi on my Cubietruck, which otherwise works fine as a headless data and media server. However, for quite some time (also on previous ARMBIAN builds) I get two failure messages every time I boot the system: > [FAIL] Starting up cgroup management Error: /var/log is in use ... failed ! ramlog-tmpfs 2.0.0 In /var/log/boot it says: Sat Jun 17 19:53:57 2017: INIT: Entering runlevel: 2 Sat Jun 17 19:53:57 2017: [^[[36minfo^[[39;49m] Using makefile-style concurrent boot in runlevel 2. Sat Jun 17 19:53:59 2017: [....] Starting cgroup management daemon: cgmanager[....] Starting ram…

Hi all, First, thanks to Igor for his job with Armbian: Scripts, compilations etc. Very apprecied so far. I own an Orange Pi 1 based on A20 SoC. Armbian kernel 4.4.1 is installed, no problem. (I have used the Igor's script to upgrade it) But I'm trying to change the bin file in /boot/bin, it seems to not work, no change if I set screen0_output_mode = 5 In orangepi.fex Of course, I'm using the bin2fex & fex2bin exec on my desktop (Kubuntu 16.04 x64), and I copy the new bin file in /boot/bin/orangepi.bin The goal is to change the first resolution, because I would like to solve this problem (see the photo, the display exceeds) on my DIY tablet. …

Just got mine Prime and installed on microsd Armbian-server for that. After setting up root password and new user, have edited /etc/network/interfaces to have uncommented these lines source /etc/network/interfaces.d/* auto eth0 iface eth0 inet static address 192.168.0.106 netmask 255.255.255.0 gateway 192.168.0.1 dns-nameservers 8.8.8.8 8.8.4.4 auto lo iface lo inet loopback every manual says it should be easy like that... but it doesn't work where to dig next?

Updated my bananapi pro to from 5.30 minutes ago...but now it doesnt boot ;-( Any possibility to get my system back without setting up completely new? Never had this with all update before.....

Hello, I have a 4x20 LCD display (with an HD44780 compatible adaptor) connected to my Banana Pi. It is running (freshly installed, switched from Bananian) on the mainline kernel: Linux bpi 4.9.7-sunxi #1 SMP Thu Feb 2 01:52:06 CET 2017 armv7l GNU/Linux However, the display is not recognized. I checked the wire connections multiple times, they're okay and the backlight is on. So I assume this is a software issue. The output of "i2cdetect -y 1" is: 0 1 2 3 4 5 6 7 8 9 a b c d e f 00: -- -- -- -- -- -- -- -- -- -- -- -- -- 10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 20: -- -- -- -- -- -- -- -- -- -- --…

Hi everyones, Last week, I tried to read the value from DS18b20 temperature sensor to log it in the monitor system I already have. But I could not get its value. I connect the DS18b20 with 4.7k pull up resistor to the pin 16th on the board, which is I guess is IO-4 [PH20] pin. What I have tried? - I have tried this: http://www.linuxx.eu/2014/09/banana-pi-temperature-sensor-ds18b20.html Step I did: Convert the /boot/script.bin to bananapi.fex, then add [w1_para] gpio = 4 to the end of file, save and convert it back to /boot/script.bin. Reboot. Problem: No w1 dir found in the /sys/bus (expecting it will show w1 dir b…

Hey folks! On monday I was able to fix the overscanning issue of my Orange Pi zero (read here). Because fiddling around with the register values can be pretty harsh some times I decided to created a small programm to move the picture of the composite video output. You can find the project page here: https://projects.nwrk.biz/projects/allwinner-tvout With this tool you can easily move the picture relative to its actual position by just calling : $ sudo tvout -m -x <value in px> -y <value in px> To reset the position you can use: $ sudo tvout -r I hope some of you may find this useful. If I have enoug…

Hi, On cubieboard 1 with following config : cubieboard login: root Password: Linux cubieboard 4.9.7-sunxi #1 SMP Thu Feb 2 01:52:06 CET 2017 armv7l ____ _ _ _ _ / ___| _| |__ (_) ___| |__ ___ __ _ _ __ __| | | | | | | | '_ \| |/ _ \ '_ \ / _ \ / _` | '__/ _` | | |__| |_| | |_) | | __/ |_) | (_) | (_| | | | (_| | \____\__,_|_.__/|_|\___|_.__/ \___/ \__,_|_| \__,_| Welcome to ARMBIAN 5.25 stable Debian GNU/Linux 8 (jessie) 4.9.7-sunxi System load: 0.72 Up time: 49 sec Memory usage: 4 % of 1002Mb IP: 1…

I am trying to test the ap6212-bluetooth script in the latest desktop image for the Orange Pi Zero +2 (H5), but am having no luck... Is there something I am missing about running this script?

I'm using ARMBIAN 5.25 stable Debian GNU/Linux 8 (jessie) 3.4.113-sun8i and on my raspberry pi the bash script below works without any errors/ #!/bin/sh i=$(cat /etc/hour.conf) new_i=$((i+1)) if [ "$new_i" -gt 15 ]; then new_i=0 fi echo "$new_i">/etc/hour.conf echo "$new_i" However on the OrangePiZero , I get the following error message? ./loops: 3 ./loops: Illegal number: new_i Any help would be greatly appreciated!

Hello, I've recently purchased an Orange Pi Zero and have Armbian 5.25 (Linux version 3.4.113-sun8i). My problem is that the network fails after some time (sometimes couple of minutes but half an hour at most). I'm not able to ping it at all. I've checked the logs in /var/log and can't find what is wrong, at least to my knowledge. Here is the boot log http://sprunge.us/gRjf, so if anyone has any idea please share. Other logs are uploaded as well orange_pi_zero_logs.7z

Hi, Does anyone has image for Orange Pi Zero 2+ H3 Ubuntu Dekstop Kernel > 4.x? Thanks.

Hi folks, I installed armbian with success on my orangepi zero. I was able to configure wifi and even fix some display issues on tv. But I am struggling to get a graphical manager running, I tried to start lightdm using: sudo start lightdm but I get "start command not found". any hints ? Thank you

Hi all.. I can't solve one issue with nanopiair h3. I was tried to set the speed of ttyS1 using stty -F /dev/ttyS1 230400 min 0 time 5 -isig -icanon -iexten -echo -echoe -echok -echoctl -echoke -opost -onlcr that works no err messages..but my data at port is like garbage... I see this err under dmesg 21 03:10:02 2017] sw_uart_check_baudset()429 - uart1, select set 1, baud 230400, uartclk 24000000 beyond rance[30000000, 120000000] on the other hand when I check the status of uart root@FriendlyARM:/boot# cat /sys/class/tty/ttyS1/device/status uartclk = 24000000 The Uart controller register[base: 0xf1c28400]: [RTX] 0x00 = 0x00000000,…

Is it possible to soft reset USB device/hub on legacy kernel? On x86 I used to use some C code (opening usb and sending ioctl USBDEVFS_RESET) but id does not work here on arm...

Nano Pi Neo, Armbian (Armbian_5.27.170422_Nanopineo_Ubuntu_xenial_dev_4.10.11) External USB device works fine when connected via USB-A jack, but doesn't work when connected to 2.54 pin header (2,3). Is there some additional steps to activate internal (usb1, usb2) ports, or it's hardware problem?

Hello, my Orange Pi Zero CPU is constantlyrunning at 67-68-70°C (it is the same with/without passive cooler). Is this temperature ok for my board? Can I run it with this temperature long time (weeks, months, years)? Thanks for help.

Hi all, I'm trying to use an Orange Pi PC Plus to drive an RS485 serial converter and ultimately talk Modbus to a sensor device. I have managed to get flow control enabled on the port, but the polarity of the RTS signal is active LOW, whereas the converter I have requires active HIGH. Is there any way to invert the polarity of the RTS pin for the UART? I think it can be done via ioctl call in C programs, but I need this applied at a system level to be compatible with some third party software. Thanks in advance!

I've been playing with Orange Pi Zero. I've been playing with both Armbian_5.25_Orangepizero_Ubuntu_xenial_default_3.4.113.img and Armbian_5.25_Orangepizero_Debian_jessie_default_3.4.113.img . I've been using a FTDI communication Serial adapter on a Mac Laptop via Terminal $ screen ≺port_name≻ ≺baud_rate≻ In my case the screen command looked like this: $ screen /dev/tty.usbserial-AE00BS5L 115200w What I've discovered is when I'm using serial communications, tools like $ nano filenamee or $ nmtui , the system interface gets all screwed up. If you have the commands memorized, you can still use Nano (barely) but not so easy with nmtui. The scree…

Hi everybody I'm using Orange PI One with OS Armbian Debian GNU/Linux 8 (jessie) 3.4.112-sun8i (Server) I need to convert some videos for make video stream(H264) but it works so slowy(3~10 fps) when I use ffmpeg. I think ffmpeg works slowly because it doesn't use HW Codec so how can I enable it in H3 CPU and use it in ffmpeg?

Hi Is docker supposed to run on OrangePi PC with Armbian 5.11? How about DM Thin below? BR Anders anders@orangepi1:~/bin$ sudo systemctl -l status docker â— docker.service - Docker Application Container Engine Loaded: loaded (/lib/systemd/system/docker.service; enabled) Active: failed (Result: exit-code) since Fri 2016-06-03 17:48:47 CEST; 14min ago Docs: https://docs.docker.com Process: 571 ExecStart=/usr/bin/docker daemon -H fd:// (code=exited, status=1/FAILURE) Main PID: 571 (code=exited, status=1/FAILURE) Jun 03 17:48:44 orangepi1 systemd[1]: Starting Docker Application Container Engine... Jun 03 17:48:46 orangepi1 docker[571…

So can you guys help me debug, why I can't get the microphone to work on my Orange pi pc. Speaker works just fine. Arecord records nothing, silent file . Here is some terminal output: msev@orangepipc:~$ aplay -l **** List of PLAYBACK Hardware Devices **** card 0: audiocodec [audiocodec], device 0: SUNXI-CODEC sndcodec-0 [] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: sndhdmi [sndhdmi], device 0: SUNXI-HDMIAUDIO sndhdmi-0 [] Subdevices: 1/1 Subdevice #0: subdevice #0 msev@orangepipc:~$ aplay -l **** List of PLAYBACK Hardware Devices **** card 0: audiocodec [audiocodec], device 0: SUNXI-CODEC sndcodec-0 [] Subdevices: 1/1 Subdevice #0: subdevice #0 car…

Hello, I run Armbian (Ubuntu) on my Banana Pi Pro. -> uname -a Linux bananapipro 4.10.12-sunxi #7 SMP Wed Apr 26 02:44:12 CEST 2017 armv7l armv7l armv7l GNU/Linux Since the last days the boot process stops. The BPP shows the followings lines on screen: [ 10.943882] brcmfmac: brcmf_c_preinit_dcmds: Firmware version = wl0: Apr 22 2013 14:50:00 version 5.90.195.89.6 FWID 01-b30a427d [ 11.233049] brcmfmac: brcmf_cfg80211_reg_notifier: not a ISO3166 code (0x30 0x30) [ 13.348258] brcmfmac: brcmf_cfg80211_reg_notifier: not a ISO3166 code (0x30 0x30) [ 100.212252] rc_core: Can't enable IR protocol cec After second 100 I'm asked for the root password t…

I'm running what I believe is the latest experimental for the neo2 - 5.27.170601. This could well be a problem related to something that doesn't yet work in this build. I've built strongswan on the neo and everything built fine and installed. ipsec starts and I'm able to bring a tunnel up to a remote vpn server that I know is fine and is verified working from some other box with identical connection and key configuration that I'm using on the neo2. When the tunnel is brought up on the neo2 it seems I'm not able to get any traffic to flow i.e. curl api.ipify.org should return the public ip of the remote vpn server but it just hangs. When the tunnel…

Hi to all, sorry if it is already described anywhere. I found some similar issues but no solution, except ...has to be modified.. or anything similar. Two days ago I updated my Armbian Jessie server on may Cubietruck with apt-get update && apt-get upgrade After that my homeautomation didn't show the SoC temperature any more. first I looked for an error in the software, then after a lot of reboots I noticed the temperature also missing in the armbian startscreen. The command cat /sys/devices/virtual/thermal/thermal_zone0/temp was responsed by cat: /sys/devices/virtual/thermal/t…

Hello I have an issue with my wifi, it's not reliable. There is no problem with my laptop, or any other devices on my network, but my NanoPi Neo is disconneted after a few hours. It can stay alive for an half a day, and after it become unreachable. As I have no other connection to my NanoPi it's a bit hard to establish what appens. But if I unplug the USB Wifi dungle, and replugged it the link come back. Doing a ping to the NanoPi, I see regular "Request timeout for icmp_seq" - every 20, 50 or 100 request, it depends - and sometime the request time is abnormally huge: serveral seconds. The config has bee done with nmtui, the…

Hello All, I'm using a cubitruck and I'm still on 5.25 mainline. I just saw that there is already v5.30 available but there are no updates available. apt-get update && apt-get upgrade tells me there is nothing to update. What am I doing wrong? Gesendet von meinem LG-H815 mit Tapatalk

So first I'm new using armbian on Opi PC. I'm trying using my Opi like a mediaserver on my TV. I install Kodi and everything is ok. I'm now trying to fix some Audio problem. When I watch e video on Youtube, some of them have e perfect sound, some of them have a lot of interferences, so mutch that I can't hear anymore anything of the video. I already configure asound.conf with the card I'm using, i tried already using only HDMI for video and audio or to separate HDMI only for video and 3.5 jack for audio. Both solutions are giving me the same problem. I install every codec I found, also the vlc complete with the browser-plugin, but no way. I t…

Hello everybody! There is a big problem with the Banana PI Pro. The system is installed on the micro SD, when updating the packages I get the following result: root@bananapipro:~# apt-get install mdadm Reading package lists... Done Building dependency tree Reading state information... Done You might want to run 'apt-get -f install' to correct these: The following packages have unmet dependencies: libc6-dev : Depends: libc6 (= 2.19-18+deb8u9) but 2.19-18+deb8u7 is to be installed E: Unmet dependencies. Try 'apt-get -f install' with no packages (or specify a solution). root@bananapipro:~# apt-get -f install Reading package lists... Done Building dependency tree …

I'm getting the following errors when running "apt-get upgrade" by banana pi: $ sudo apt-get upgrade Reading package lists... Done Building dependency tree Reading state information... Done Calculating upgrade... The following package was automatically installed and is no longer required: python-dialog Use 'apt-get autoremove' to remove it. Done The following packages will be upgraded: certbot linux-image-next-sunxi python-acme python-certbot 4 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. 1 not fully installed or removed. Need to get 15.9 MB/16.1 MB of archives. After this operation, 1,021 kB of additional disk space will be used. Do you wan…

I have an orange pi pc Just installed debian When it comes up on my TV, I can't sell the first 3 characters of screen, and it runs below the bottom of the TV so I can't see the last line or so How do I fix?

Theoretically Armbian supports wifi on BPI M2+ since v5.13. I'm on v5.25 desktop version, bluetooth works but no wifi. Do I need to install any drivers?

Hi folks, I tried to run jdownloader on orange pi pc under armbian 5.25 but it was not successful, i noticed that java uses more than 100% of cpu, is it normal ? Best regards. Adel.

Hi all, first i want to thank all of you for this great software. Problem: No ethernet on mainline 4.11 kernel. I tracked the problem down to a 'ethernet status = "disabled"' in the dtb for the orange pi zero. How to fix it? I have only very little experience with Device tree. 4.11 is ok for the other OPs, i tested the OP One. Kind regards svollmar

I did manage to use the rmbian_5.27_Orangepizeroplus2-h5_Debian_jessie_dev_4.11.0.img.xz image and things boot fine. I also get pretty console on hdmi. But no network, and I don't have a way to get the keyboard on. Any suggestions on what kind of an adapter I need to get power AND usb keyboard to the thing (since there are no extra ports on it)? Or is it serial? Good recommendation on proper 'converter". I did modify the initial armbian_first_boot to enable wifi with proper ssid / password, and even enabled static, but no dice. Thomas

I just recently acquired a few Orange Pi Zero Plus 2 boards. I need to get them working for a Bluetooth application. After a somewhat rough start with the WiFi they appear to be running smoothly now. The first problem I am noticing is that sata-nand-install does not exist on the distribution for the H5. Can anyone shed some light on what is necessary to get these boards to boot from eMMC? Is there anyone currently working on this problem? If not, what is the correct version of that script that I should download to begin trying to port it, and what utilities will I need to adapt to make it happen? Any advice on how to begin? On another front, doe…

I recently switched from a Raspberry Pi 2 running Arch Linux to a Banana Pi (the original) running Armbian for music streaming using MPD. My output device is an XMOS-based Gustard U12 asynchronous USB transport feeding my DAC via AES/EBU. Using Armbian on the Banana Pi, all my 24-bit/192kHz music is being played back as 24/96, according to the display on the transport and DAC. All other sample rates (44.1, 88.2 etc.) are being played back in their native sample rates, as expected. Is ALSA on Armbian system-wide limited to 96 kHz? I have never had an issue like this before, and I don't know where to begin in regards to troubleshooting. I'm guessing th…

I got a new board revision of the Olimex A20-OLInuXino-MICRO Board (Rev. J). It works with the by Olimex provided Jessie image but not with Armbian_5.25_Micro_Debian_jessie_next_4.9.7. I get no IP address by DHCP because the ethernet is not working. The reason could be an new ethernet chipset they introduced with this revision. New: Microchip's LAN8710AI-EZK(QFN-32). Before: Realtek RTL8201CP(LQFP-48) They publish a patch on: https://github.com/OLIMEX/OLINUXINO/blob/master/SOFTWARE/A20/A20-build-3.4.103-release-5/a20-phy_1000_100-dram.patch

I received today my BPI M2+, however, I cannot make it boot. I tried both Diet Pi and Armbian Server. No boot. The red LED is on all the time. I'm using a Samsung EVO 32 GB SD card flashed with Etcher on Ubuntu. My power supply is a 5v 3A barrel connector. Since the usual suspects are not the cause, I have no idea what might be going wrong.