Allwinner sunxi

Hello I have an orange pi pc2 device with armbian-release on it. Yesterday I was faced with strange error: My orange pi pc2 was shut down, in auth log file I see "Power key pressed. Powering Off... System is powering down." But there is no power key and no one can press powering off by console or interface. Temperature in error moment was OK = 57 C How it can be, why orange go to powering off by him self? Spoiler armbian-release: BOARD=orangepipc2 BOARD_NAME="Orange Pi PC2" BOARDFAMILY=sun50iw2 VERSION=5.78 LINUXFAMILY=sunxi64 BRANCH=next ARCH=arm64 …

Hello, guys. I need help, don`t know what is going on. Yesterday two of my device`s (orange pi PC2) was rebooted by themselves. At different times, in separate areas. In log files I see fact of reboot but don`t see the reason. Temperature was in OK. Power adapter and micro SD card, which I use, in attachment. What should I pay attention? Can it be the reason is unattended upgrades or some armbian cron process? Environment: BOARD=orangepipc2 BOARD_NAME="Orange Pi PC2" BOARDFAMILY=sun50iw2 VERSION=5.67 LINUXFAMILY=sunxi64 BRANCH=next ARCH=arm64 IMAGE_TYPE=custom BOARD_TYPE=conf INITRD_ARCH=arm64 KERNEL_IM…

I have tested Armbian_19.11.3_Orangepipc2_bionic_current_5.3.9 and Armbian_19.11.3_Orangepipc2_buster_current_5.3.9 images from the official download site. The Debian Buster image is fast and stable. The Ubuntu Bionic build have random hangs on different boot positions. Sometimes works, but after reboot it hangs again randomly. I have burned the the images to the same microsd card. (Toshiba 32GB) I have tested with other microsd cards like Sandisk Extreme 32GB, Samsung EVO+ 32GB. I have the same results. The power supply is enough for the board. (5V 4A) This is not my first orangepi board, so I know how to burn the images to the sdcards. screenlog.bionic.0 (problems)…

I am running Armbian Focal with Linux 5.4.43-sunxi64 (and now downgraded to 4.19.125-sunxi64) on my Orange Pi PC 2. I use motion software to provide a "18ec:5555 Arkmicro Technologies Inc. USB2.0 PC CAMERA" to the network. I also use pjsip to provide SIP functionality for the same device as audio input. As soon as I start pjsip for some reason I get a very high load average until the kernel detectets stalled CPUs and finally the entire device crashes. This worked fine in a previous version and started after I upgraded to focal. I did a kernel backtrace and this is what I got: [ 401.002517] sysrq: Show backtrace of all active CPUs [ 401.009965] sysrq: CPU1: [ 401.01…

Hi. First, thanks for Armbian! I compiled it from sources and all works fine on my Orange Pi Plus When I try Armbian with LCD monitor (HDMI) - it works well, but Youtube video playback (even 480p) very-very slow Is there any way to activate/install/etc. HW video acceleration on Armbian on Orange Pi Plus (Allwinner H3) for watch Youtube videos on LCD monitor ?

Hello folks, Based on the important amount of work you guys put in the H3 support and the great progress you've made, thank you for that, I am seriously considering buying an Orange Pi Plus (I need Gigabit Ethernet for my application). I need a server config with remote desktop via vnc, rootfs on SATA HDD, good ethernet performance, don't need Wifi, 24/7/365 operation. I just noticed there is two versions of the Orange Pi Plus, the "regular/original" with 1GB of memory and the "Plus 2" with 2GB of memory. Considering the price difference I am thinking of going with the "Plus 2", more memory never hurts, and I was wondering if I would encounter any issue using the …

Hi The question is maybe trivial but I'm not sure how are numbered pins on the Orange Pi Plus 2 board. On the board is a triangle/arrow directed to an one pin. Is it no. 1? Thank you in advance. Wojciech

Remark: on my Orange Pi PC and Orange Pi Plus 2e - everything is OK. Problem occurred on Orange Pi Plus 2 and Orange Pi Zero After upgrading to: [root@PKTEST ~]# uname -a Linux PKTEST 5.10.4-sunxi #20.11.6 SMP Sun Jan 3 21:28:45 CET 2021 armv7l GNU/Linux My "headless" Orange Pi Plus 2 "disappeared from network. I switch it off and connected via serial. I was able to login. Device runs successfully, it is assigning IP to network interface (static assignment) but... there is no connectivity at all (both egress and ingress). [root@PKTEST ~]# ifconfig enx0281cbcd0fcf: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 …

Which system to install on Orange Pi Plus 2 ? http://www.armbian.com/orange-pi-plus/???

I am trying to switch legacy kernel to "next". I did it successfully with armbian-config for OrangePiPC (obviously Armbian was installed on SD card). Once I attempted to do the same with Orange Pi Plus and system installed onto internal EMMC then after reboot... nothing. I am wondering also if the issue is related to platform or the fact that Armbian was installed on EMMC. I have connected TTL2USB and following is the result (seems to be indefinite loop): U-Boot SPL 2017.11-armbian (Jan 25 2018 - 07:58:02) DRAM: 2048 MiB Trying to boot from MMC2 U-Boot 2017.11-armbian (Jan 25 2018 - 07:58:02 +0100) Allwinner Technology CPU: Allwinner H3 (SUN8I …

--- ENGLISH --- Hello, Is there a kernel 4.9+ with the usable sata port, for an Orange PI plus 2 ? I looked HERE but I can not recover an old version with functional SATA port. Thanks for your help. Marc --- ORIGINAL --- Bonjour, Est ce qu'il existe un kernel 4.9+ avec le port sata utilisable, pour un Orange PI plus 2 ? j'ai regardé ICI mais je ne parviens pas à récupérer une ancienne version avec port SATA fonctionnel Merci pour votre aide. Marc

Hello, Can i use a 8TB hdd with orange pi plus 2? Is there any hardware / sotfware limitation, or i do something wrong? Armbian sees only 1.40 TB of 8 TB. I started from: https://www.armbian.com/orange-pi-plus-2and downloaded the jessie server. root@orangepiplus:~# uname -a Linux orangepiplus 3.4.112-sun8i #10 SMP PREEMPT Sun Oct 23 16:06:55 CEST 2016 armv7l GNU/Linux root@orangepiplus:~# dmesg |grep "sda\|scsi" [ 1.293990] scsi0 : usb-storage 3-1:1.0 [ 2.293196] scsi 0:0:0:0: Direct-Access ST8000AS 0002-1NA17Z 0009 PQ: 0 ANSI: 0 [ 2.295330] sd 0:0:0:0: [sda] 2743151276 512-byte logical blocks: (1.40 TB/1.27 TiB) [ 2.296410] sd 0…

Hi, I've been using armbian in combination with openmediavault for the last years to access my files on an 1TB HDD. Today I wanted to upgrade the drive to a 3 TB one, but it just shows a capacity 746GB. Is there a size limit on the GL830 for harddrives or why isn't the real capacity showing up? fdisk-l: Disk /dev/sda: 746.5 GiB, 801569724416 bytes, 1565565868 sectors Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Thanks in advance Regards, Joshua

Does Armbian run on the Orange Pi Plus 2, and support its SATA interface? I was unable to find this exact board model in the compile.sh menu list.

Hello, I have an orange pi plus 2 device. but Armbian 5.69 (5.75 or latest version) above Orangepiplus Ubuntu xenial default can be the url for desktop version. Can you please give me the working url? (By the way, I couldn't find a section for orange pi plus 2 in the forum. )

Hello, My Opi+2 somehow blocks internet when i turn it on. Even though it is not connected on ethernet port. Then i disabled wifi. Everything seemed fine at first, but as because of i need internet and the wifi is disabled, i had to use ethernet port. When i plug ethernet cable to the opi+2, the modem's internet connection drops. I don't have any ideas about why it is happening. Here is the modem log: Spoiler Jan 1 00:00:08 syslog emerg BCM96345 started: BusyBox v1.17.2 Jan 1 00:00:08 daemon notice kernel: Linux version 2.6.30 (root@localhost.localdomain) (gcc version 4.4.2 (Buildroot 2010.02-git) ) #4 Wed Jun 15 15:00:07…

Hi, I got a "Orange Pi Plus 2" and installed armbian in it: http://www.armbian.com/orange-pi-plus/ It is necessary that the operation of the web browser becomes more fluid, do I need this in my application. I need another browser version? which one? I need to enable something to be accelerated 2D and 3D? How to? Forgive me because of my bad english.

Hi! I have an OPiPlus2, the official product page says that the soc runs on 1.6ghz, but the cpufreq-info says it's hardware limited to 1.3ghz, so what now? Thanks in advance and sorry if I miss something!

Hello, my opi+2 sometimes dies after long running times and becomes so hot that I cannot touch it. When I looked to logs, I saw kernel panic errors like, you know, tons of meanless numbers. I can provide any information you want. It's been few hours since I started it but here are logs. http://sprunge.us/jJSK Probably it had had 0.05 15 min load before it died. I couldn't see the message I saw before, probably they got removed from the system after few minutes. I'll send you newer logs after I get accurate errors again. This may take a week, or few days.

Hello, I bought an orange pi plus 2 and connected it to the power supply, the android that is already installed recognized the mouse and keyboard without any problem. I tried to boot the ARMbian using the version I was given, the orange pi plus 2e version, because there is no direct support for the orange pi plus 2. The BOOt works without any problem, but when I create the user, the system doesn't recognize my keyboard or mouse and I get stuck on the creating user screen. I'm using a 5V/3A power supply and a bluetooth mouse. Can anyone tell me if this is a kernel bug or am I using the wrong version to BOOT?

My newly received Orange PI Plus 2 gets stuck in a reboot loop, if I try to boot headless (no USB, no HDMI; UART is connected to see boot messages). Is such a problem known here? I have the same issue with some other linux images from other distributions, but hope to find some experience here. In detail: Power supply: Regulated Power Supply set to approx 5.2V (max 2A, built-in analog amperemeter shows max 1.4A during boot). No cables connected except power supply and UART I tried various SD-Cards (8GB or 64GB SDHC) --> The Orange PI Plus 2 boots till USB initialization and then reboots (sometimes it freezes). …

Hello, I have an an orange Pi plus 2+. I had installed armbian ubuntu 18.04.2 on it. I used it only on wired network, and I experienced that the downloading speed is perfect, but the uploading speed is very slow. So at the network synchronous, the upload is same fast as download. On the same wiring and with another device I have not noticed this phenomenon before. Do you know what can be the reason of this? Speedtest:

Hi whoever can help. Just bought the Topic device. Very disappointed because of very poor docs and support. I cannot boot Armbian. There are must be something undocumented. I just burnt image desktop Armbian with dd if=image of=/dev/sdc to SD but it is ext4 on /dev/sdc1 and fsck reports good. Well I made it is bootable by setting boot flag in partition but the device is not going to boot. None of leds is lighting. The device is booting well without any SD from it's internal flash into Android. (How to put there Armbian by the way?) It is also booting into Android from SD which I burnt under Windows(!!!!) with a "special" buggy tool Phoenix (Crazy!!!) …

Hi everybody, I need some help because I can't make my OPIPlus2e working the way I want. If I understood well I have to install latest armbian, and copy/past script.bin, but sometimes ethernet is not recognized. I tried every distros on my orangepi2e, but I can't install things like kodi (refuses to start, missing libs), or making work hfs drive (can't mount hfs although hfsprogs well installed). I ended up installing openelec and it works great, but I would like to do a NAS with it. Is it still in active development or there is working ISO ? Thank you very much. Best regards, Poukin

I have been working with the legacy Ubuntu on this board with great success - and now on the latest nightly build of Ubuntu ARMBIAN 5.32.170921 nightly Ubuntu 16.04.3 LTS 4.11.12-sun8i All is well, thanks to this command added to /boot/armbianEnv.txt overlays=uart1 uart2 uart3 i2c0 i2c1 I can now see all the ports - and both I2c channels - the ONLY issue I have is that UART0 is occupied doing serial debug and for the life of me I cannot figure out how to turn this off. I do not need a serial debug port and would rather use this as a general purpose serial port. When I try however, debug info comes out.. Can someone tell me…

Hi, I've been playing around with a OPi Win+ which is aint bad but full support seems a while off ... I'm looking for a quad core, 2G, good wifi with external antenna and this seems to fit the requirements. I dont care too much about hdmi but if it works all the better. I was just wondering what current owners thought of it. Can the internal wifi do AP mode and will it do dual modes ... hostapd-8188 will create wlan0 & wlan1 so that you both connect to an AP and be an AP. Google doesnt show much about 8189ETV Given that the armbian download shows it with a legacy kernel but stable I expect that everything 'works' ... …

Hi everyone, I am using Armbian. SPI overlay and "spidev" are already loaded "[ 2.614185] spi spi0.1: spi_setup / gpio_is_valid(21) ... doing gpio_request ... [ 2.614213] spi spi0.1: spi_setup / gpio_direction_output(21) done ! [ 7.256451] spidev spi0.1: probing from DT " Did someone succesfully used SPI on this board using WiringPi, WiringPISPI? I have an application that returns me "Unable to open SPI device: No such file or directory". I do have ls /dev/spidev0.1 I tried different libraries for WiringPi but no success. It seems that the library tries to load another module instead "spidev" that is already loaded in linu…

Hello Guys, I have a problem with time in my Orange Pi Plus 2E. I have installed yesterday Linux orangepiplus2e 4.19.62-sunxi #5.92 SMP Wed Jul 31 22:07:23 CEST 2019 armv7l GNU/Linux and and I can't set right time. root@orangepiplus2e:~# hwclock 2019-10-07 16:52:25.994362+02:00 root@orangepiplus2e:~# date Mon Oct 7 16:56:46 CEST 2019 Now is 16:40 hour. Yesterday different was about 20 minutes, today is about 4 minutes. How to align the time? root@orangepiplus2e:~# hwclock --test -D hwclock: use --verbose, --debug has been deprecated. hwclock from util-linux 2.33.1 System Time: 1570460247.618048 Trying to open: /dev/rtc0 Using the rtc interfac…

Hi, I just want to inform that probably there is a problem with correct detection of platform. Originally I had everything set for Orange Pi Plus 2E. However, after upgrade avery file is related to Orange Plus (2) - not 2E: Previously in any mentioned file there was orangepiplus2e identifier. Please see also dpkg.log: 2016-09-19 11:00:20 startup archives unpack 2016-09-19 11:00:21 upgrade linux-firmware-image-sun8i:armhf 5.16 5.20 2016-09-19 11:00:21 status half-configured linux-firmware-image-sun8i:armhf 5.16 2016-09-19 11:00:21 status unpacked linux-firmware-image-sun8i:armhf 5.16 2016-09-19 11:00:21 status half-installed linux-firmware-image-sun8i:armhf …

good night, is ethernet and usb a shared hub on Orange Pi Plus 2E and H3 SOC? i get max dl\up speeds on speeds tests and good write and read speeds but when i dl something it max at half my Internet speed thanks

Hello Armbian users ! I use "ARMBIAN Debian GNU/Linux 8 (jessie) 3.4.112-sun8i" installed on EMMC and Orange Pi Plus 2e . Can you explain two things about Armbian ? My image is: Armbian_5.14_Orangepiplus2e_Debian_jessie_3.4.112 1. Why do I have max CPU clocked at 1296.0000 Mhz ? I read the Orange Pi Plus 2e have Quad Core 1,6 Ghz, right ? shell> /usr/bin/cpufreq-set -d 912MHz -u 1600MHz -g on demand # does not work . 2. My Armbian is installed on eMMC 16gb, I use very good script writer by Igor Pecovnik . How can I boot orangepi with on eMMC and with a second SD card ( for samba ) ? Partition: 1. /dev/mmcblk0p1 - boot - Armbian on eM…

Hello, I've purchased a 2e recently, in order to replace a RPI3 with a more powerful device (and get graphics acceleration, be able to watch youtube videos, etc). I've tested multiple builds, and even on the legacy kernel, there is just no way to get it to work properly. The board, when it sits completely idle, is between 48 and 52°. And if I move a window on the desktop, it's all laggy and the cpu jumps to 60+° --the same with a mainlain image in fact, in headless mode... frequently the console would freeze for a couple seconds while the temperature is very high for no reason. It seems there is no hardware graphics acceleration, ever. Curr…

I'm trying to configure the RTL8189FTV module on an Orange Pi+ 2E in SoftAP + STA mode so I can use it as wifi hotspot. According to this old document from Realtek (http://www.ofeixin.com/downloadRepository/8da8dda7-6721-4ac8-a7db-47cc4d9b218c.pdf), it's possible to do so using an RTL8189ETV, so I'm assuming it's possible on the RTL8189FTV, too. The default driver doesn't allow concurrent connections like this, tho, so it must be recompiled. I downloaded the source recommended on the sunxi wiki (http://linux-sunxi.org/Wifi#RTL8189FTV): git clone https://github.com/jwrdegoede/rtl8189ES_linux.git cd rtl8189ES_linux git checkout -B rtl8189fs origin/rtl8189f…

Friends I have a keyboard Rii i8 + I put the adapter that comes with the keyboard I put to locate by the bluetooth of the armbian it finds but at the time of pairing in happens nothing, only blinks green in Bluetooth and nothing else. I've tried another adapter, but it does not even appear as installed. This keyboard I use it with Openelec and works perfectly. Does anyone have any tips on what I can do for it to work on Armbian? Thanks.

Hi, I am building small file server. Is it possible to boot from mmc AND have data on sd card without the need of removing sd card on every reboot? I've installed armbian on smaller sd card, used nand-mmc-* script to write armbian onto mmc. Now, everytime I reboot I need to remove sd card, wait for system to load and put sd card back. I edited .fex file, setting sd card mode to 1, but it didn't helped. Any ideas/manuals on that? Thank you in advance.

Hi, I've managed to install Armbian_20.05.2_Orangepiplus2e_focal_current_5.4.43_desktop on my board. Now I'd like to get decent web-browsing performance (i.e. 1080 videos on a browser) and I've tried installing the mali drivers with no luck. Is there an updated guide that works with the latest version of armbian? Thanks in advance

Orange Pi Plus 2e How do I clone the SD card and both have boot capability? I am new to the concepts of Pi's so I am looking to slowly add abilities to the pi and have a working clone which I can use when I stuff it up. I have also seen no mention of grub being used anywhere. My main computer is a amd 64 with Debian running but I can use my laptop with win 8.1 on it but would prefer a solution which I can use on Debian Thanks for your help Dave

Hi all, I am new to this forum. I just got a Orange Pi plus 2E. The specs are nice and the price is competitive. However, I don't seem to find an image with gpu working well. No hardware acceleration available. This means I cannot use chrome properly / watch videos / play web games with WebGL. From armbian website / logs: Mali OpenGL ES does not work on H3 boards with 2GB RAM (Orange Pi Plus 2, Orange Pi Plus 2e) Any idea when will the Mali driver work on 2GB RAM models? The OPi is nowhere near usable right now. Thanks!

Hello. I just wanted to let you know about a possible bug I have found in the kernel installation script. I was using my OPi+2e with the default kernel, and today I installed next to test it, using armbian-config. Everything went fine, and seemed very stable overall (I didn'd use it for more than two or three hours, though). But then I wanted to revert to default, so I used armbian-config again. When I rebooted, the board started the u-boot sequence, but it got stuck on "Starting kernel". No other messages after that. I tried several times, with the same results. Since I have no logs, the only info I can give you is that I have an external USB HDD …

I received my new Orange Pi Plus 2e and tried to set it up. I already got an Orange Pi PC2 running so it's not really something new to me. I used the latest Armbian images (desktop and server), flashed them to my SD card (with Etcher) and plugged it into the Pi. The green LED lights up and the device seems to be working. To this point it's the same as on my PC2. But after ~1min the red LED starts flashing twice over and over and nothing seems to be working. I get no signal over the HDMI out and the LED keeps flashing. I flashed the SD card three times to make sure it's not a flashing error. I tried the desktop image twice and the server image once. It always ends wit…

Just FYI: Orange Pi Plus 2E is now available for $35 and shipping costs remain the same (pretty low compared to some competitors): http://aliexpress.com/store/product/Orange-Pi-Plus-2-E-H3-Quad-Core-1-6GHZ-2GB-RAM-4K-Open-source-development/1553371_32665196281.html Please remember that this board was designed based on community requests (dropping the slow GL830 USB-to-SATA bridge and the internal USB hub and exposing all 4 USB ports physically to the outside) and should make up for a really nice server with 2 GB DRAM, Gbit Ethernet and 4 USB ports (3 real hosts ports and one Micro OTG). So now we have the following H3 boards with Gigabit Ethernet: Banana …

Hi, I installed armbian onto eMMC. Frankly, I expected better results. Please anybody confirm what I understood. 1. The sequence reading speed is 70MBytes/s. 2. The sequence writing speed is 10MBytes/s. 3. eMMC is not optimized for random operations. 4. When writing operation is performed, the system gets VERY SLOW to respond. And the couple of questions. 1. What utility and where to get to benchmark disks well? 2. Will USB SSD perform with better performance than eMCC? Thanks a lot in advance and hope to see this in the FAQ. Dmitry

Hey guys, Firstly thank you very much for that amazing project and giving life to our opis. I really like armbian jessie desktop but I prefer ubuntu based distros. I find an xenial image from the armbian site and install-upgraded. Then I installed lubuntu-desktop. Looks very good seems very fast and smooth but I can't listen musics with audacious. Sound comes distorted and laggy. What can I do to get armbian desktop quality playing video and mp3 files.

Hello everyone, First of all, sorry for my bad English. Quick description of my problem: I recently buy three Orange Pi Plus 2E with official case and official AC adapter. On this three cards I want to use Armbian, I use the last version of Armbianfound here: https://www.armbian.com/orange-pi-plus-2e/ Write on SD card with Win32DiskImager. For information, I use a Samsung EVO 16G SD Card, same HDMI cable, same screen and official A/C adapter. For two cards, no problem, boot on Armbian on SD card and install on emmc in 10 minutes, but the last one have some problem... The last card won't boot on SD card with Armbian: black …

Hi I trying to return in work OPi+2e board but faced some odd thing. When I trying to boot Armbian I getting temperatures about 180C which leads to shutdown during booting. It reproduceable with all versions from hirsute/5.12.15 back to oldest avaliable bionic/5.4.8 Official Ubuntu xenial/5.3.5 works fine, but /sys/class/thermal/thermal_zone0/temp gives negative readings (like about -76500) Installed on eMMC old RetrOrangePi which is Armbian jessie/3.4.113 also works but gives zero (exactly 0) temp reading. Finger test gives "room temperature" reading and "warm" while old OS works. Definetly not 180C Board itself is from 2017, worked a…

Hi, I bought about a year ago an orange pi plus. Just a few weeks ago, i tryed the new distro's I love to have debian on the board. And like your distro verry much. I have 2 problems: 1) If i download the file for orangepiplus, the board does nothing. No leds go on, no grafics on screen, nothing I also tryed at home compiling it myself. The result is the same nothing. My Orange Pi Plus has an H3 processor - it is one of the first OrangePi Plus boards. (Is this an error in your piplus distro - just because loborus for piplus works) 2) If i download the orangepih3 file, the board will startup. I can not run sata-nand, because i get an error - abo…

Hi everyone, First of allm thank you for all the stuff on your site / forum, I recently decided to give a try to an orange pi board, and chose the orange pi plus. I have downloaded and installed the raw file of jessie desktop found on the site, and then tried to launch it. At the first startup, I had a message about my ethernet connector, gmac probed... no PHY... and then the process continue, the card shut down. I unplug/plug in the power supply, and then the board correctly boot up, and I was able to log in. The wifi is working fine (I use it now), but I don't have the ethernet connection. The ethernet cable is plug in, my ISP's router has a DHCP server…

Dear Users, I bought a new 'Orange Pi Plus' board to learning pi. But i can not install it by stable image. I treid a lot of image what i found. (Debian,ubuntu etc) I want a image with ( Gpio driver and ir driver and desktop gui) not more. Please help me. i can buy it. Thanks best regards. Murat.

Hello, my Orange PI Plus is no Wifi. when i give lsusb is it no wifi modul. Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 002: ID 05e3:0718 Genesys Logic, Inc. IDE/SATA Adapter Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 003: ID 05ac:0256 Apple, Inc. Bus 002 Device 002: ID 1a40:0101 Terminus Technology Inc. 4-Port HUB Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Armbian and Lubuntu the same. any idea…

Hi Just install latest armbian on Orange Pi Plus. I installed to emmc and i have i issues. that is everytime when i switch on the power adapter i have to manually press the power button of orange pi plus in order to on boot. Is they anyway not to press the power button to boot? What i want is when i switch on the power adapter and it start booting. Tks

Hi there, I am new here, and new to Armbian I have a Orange Pi Plus2 and I am trying to make a project to present Spotify as an iPod over USB, so that it can be used in vehicles / docks that support iPod connectivity via USB Some of this work has already been done here on the iPod USB gadget driver side https://github.com/oandrew/ipod-gadget Using the standard premade armbian builds I cannot compile the source code as the headers are missing. Therefore I compiled Armbian from source using INSTALL-HEADERS=yes, mainline Jessie. As there is no option for the Orange Pi Plus2 board, I used the Orange Pi plus config instead. …

Hello, I need help for my Orange Pi Plus2, i have found a Ubuntu 15.10 (Wily) *.img that works on my board. Ubuntu_wily_mini.img.xz https://mega.nz/#F!wh8l2BjK!OBep3nMldBletvNNwkH2Jg Also installed on my board but i have a problem there are no drivers for the ethernet (Lan / W-Lan) clould someone help me to compile this image with the right drivers. Please note i dont want a desktop interface only the server version of ubuntu. Thanks a lot.

Hello all, I setup an orangepi plus2 with Armbian_22.08.2_Orangepiplus_bullseye_current_5.15.69.img I follow tuto and it worked with boot on SD card. I run nand-sata-install Then, I reboot. I was in safe mode and try format emmc Then I reboot again Since, I have only green light. I connect to COM port and see that : U-Boot 2022.07-armbian (Sep 21 2022 - 18:37:27 +0000) Allwinner Technology CPU: Allwinner H3 (SUN8I 1680) Model: Xunlong Orange Pi Plus / Plus 2 DRAM: 2 GiB Core: 65 devices, 18 uclasses, devicetree: separate WDT: Not starting watchdog@1c20ca0 MMC: mmc@1c0f000: 0, mmc@1c10000: 2, mmc@1c11000: 1 Loading…

Hi and sorry for this questions. I buy this board, and now i need an working image with wifi. thanks for an answer.

Firstly many thanks to all the hard work from the Armbian developers - it installed onto the eMMC of my new Orange Pi Plus2E first time with no problems I'm trying to benchmark the board (with a fan/heatsink) and without. The standard Armbian runs it at a maximum of 1.296GHz but I'd like to run it faster. I'm new to using fex, but this appears to push it up to 1.536GHz with a Vdd of 1.5V: cd bin2fex /boot/bin/orangepiplus2e.bin orangepiplus2e.heatsink.fex sed -i "s/1296000/1536000/g; s/1320/1500/" orangepiplus2e.heatsink.fex cp /etc/default/cpufrequtils /etc/default/cpufrequtils~ sed -i "s/1296000/1536000/" /etc/default/cpufrequtils fex2bin orangepiplus2e.heatsink.…

This is with standard Armbian Debian GNU/Linux 8 (jessie) 3.4.112-sun8i at the stock 1.296GHz CPU speed, and there is a fan+heatsink to stop overheating. I've disabled swap. # memtester 239 5 is OK, while # memtester 240 5 crashes out almost immediately: [10933.657662] Out of memory: Kill process 17061 (memtester) score 89 or sacrifice child [10933.657673] Killed process 17061 (memtester) total-vm:246992kB, anon-rss:245380kB, file-rss:28kB If I enable a small 32MB swap file, memtester seems to work fine up to 1200MB (still 750MB reported free, and no swap used) and crashes out for any larger values?? I'm getting the same out of memory problems trying to run the …

hello everybody, I am new on the linux world but after some search and work , I managed to start my Orange Pi plus 2E with a stretch image armbian 5.38 and everything is working well. Recently after successfully installed several domotic solution like Jeedom and Zwave, I start to work on the integration of a 3G card, but I need to use some CLI to change parameters and it is when I discovered that I completely forgot Root password and the other SU abled user account. Since everything is running from the eMMC, i cannot access to any fils in the OS as explain in some other discussion with card using SD card. Is there a way to recover…

Hi all. I recently bought an Orange Pi Lite. After trying to get the power switch to work as a power switch (by this I mean booting the board when it was previously shutdown), and after searching for a while, it seems that the power switch in the Orange Pi Lite is not a real one, but it's instead connected to a GPIO. Do you guys know of any Orange Pi board that implements a proper power switch? Thanks.

Hello, I'm trying the currently offered Armbian Bookworm images for the Orange Pi Prime, using kernels 6.1.30 and 6.2.16, and notice that there is no support for SoC temperature monitoring, neither in armbianmonitor, nor in /sys/devices/virtual/thermal/. Here is the debug info from 6.2.16: https://paste.armbian.com/cetovulubu Is that a known issue? An older Armbian image that I have downloaded previously, using the kernel 5.15.93, shows the temperature just fine.

When i first tried out my orange pi prime in october 2020 i thought i recalled that the wifi worked. With a current armbian image, the wifi can't authenticate. I tried several of the available kernel images. I'm sure that the wpa2 password is correct because I control the router and other devices connect all the time. If i plug in an ath9x usb wifi dongle, that is able to connect, so it would appear to be an issue with the onboard rtl8723bs driver.

Hi everyone. I got a Orange Pi Prime (OPi Prime). It works ok with "official" debian and ubuntu images from Xulong (xulong web site). When I try to use Armbian 5.33 stable, I got some text into HDMI screen until the words "loading kernel", then nothing is shown on monitor; but through TTL port I can login as root. That behaviour is repeated wheter using Ubuntu (desktop or server), Debian (desktop or server). With Legacy kernel (3.x) the same card worked in the past, but the image is not available anymore. I'm attaching the output from TTL console: Spoiler CPU: Allwinner H5 (SUN50I) Model: OrangePi Prime…

with hdmi figured out. Rather, he himself earned a normal. It could be seen that a reboot was needed. Therefore, I rename the topic Has anyone tried to use the Majordomo for Armbian? Have experience? I want to try using orange pi for a smart house

Hi! Armbian_21.08.1_Orangepiprime_focal_current_5.10.60_xfce_desktop sometime failed to boot. No green indicator, and black screen. Tried to decrease CPU max frequency sudo nano /etc/default/cpufrequtils ### ENABLE=true MIN_SPEED=480000 MAX_SPEED=1200000 GOVERNOR=ondemand ### but still failed to boot sometimes. Armbian_5.75_Orangepiprime_Debian_stretch_next_4.19.20_desktop have been installed before and boot fine during 2 years.

After update to Armbian 5.60 (Debian 9) hostapd became unable to start. ``` # /usr/sbin/hostapd -B -P /run/hostapd.pid /etc/hostapd/hostapd.conf.orig -dd random: Trying to read entropy from /dev/random Configuration file: /etc/hostapd/hostapd.conf.orig ctrl_interface_group=0 nl80211: Supported cipher 00-0f-ac:1 nl80211: Supported cipher 00-0f-ac:5 nl80211: Supported cipher 00-0f-ac:2 nl80211: Supported cipher 00-0f-ac:4 nl80211: Supported cipher 00-0f-ac:6 nl80211: Using driver-based off-channel TX nl80211: interface wlan0 in phy phy0 nl80211: Set mode ifindex 3 iftype 3 (AP) nl80211: Failed to set interface 3 to mode 3: -1 (Operation not perm…

Hi, I've bought Orange Pi Prime from the second hand. I've also bought 5V 3A power supply. It it was booting with Debian and Armbian. I was using Kingston SDHC cards. Suddenly my board stopped booting from mmc card. I also tried to boot it from Sandisk A1 class card but with no success. Do ypu think it is hardware malfunction or something else?

Hi everybody, burned the latest armbian for opi prime since I got the board, and the greed led is working, but after all I cannot find it with “arp -a” and the ethernet led is flash, both color. Anyone have the idea? I don't have a screen or tv even a router here course I am at university. So I directly connected my computer with the board. Don't think anything is wrong.

My Orange Pi Prime freezes when compiling anything major (Ruby, CPython). It completely locks up halfway through. No error or kernel panic from serial either. HDMI output goes black. I've tried: Better cooling, different brand SD cards (Sandisk Ultra, Samsung Evo from reputable suppliers), different power supplies, and even disabling swap. Tried my Lab Bench Power Supply at 5.00, 5.10, 5.20 and 5.35 volt, volt drop is about 0.1 volt measured at the board, and power usage at 400-700mA depending on the load. Tried `stress` in all sorts of configurations for times up to 1 hour, this does not crash the board. Iozone also does not crash the …

Hello guys, i have a orange pi prime. I'm download to https://dl.armbian.com/orangepiprime/Ubuntu_xenial_dev_desktop_nightly.7z this image and i flash to 32 gb sandisk card. System is not opened, i see "starting kernel" message and some controls after it's rebooting continuos. I dont start it. I'm waiting for your helps. King regards

Hi Has anyone got the on board Bluetooth going on their OP Prime ?

Can you power Prime with OTG port? Or does only PSU work?

Just got mine Prime and installed on microsd Armbian-server for that. After setting up root password and new user, have edited /etc/network/interfaces to have uncommented these lines source /etc/network/interfaces.d/* auto eth0 iface eth0 inet static address 192.168.0.106 netmask 255.255.255.0 gateway 192.168.0.1 dns-nameservers 8.8.8.8 8.8.4.4 auto lo iface lo inet loopback every manual says it should be easy like that... but it doesn't work where to dig next?

Hi! Could you please clarify, is there a way to increase default limitations for max cpu freq (H5) on Orange Pi Prime? As i understand, according to driver (cpufreq-dt): /etc/default/cpufrequtils is a bit less restrictive: Is this a driver limitation ? Or there is a way to increase cpu-freq, but it's not used by default ? ( ... and why, if it is so ?)

(picture courtesy @renaudrenaud) We spotted a new OPi Zero variant with one USB-A receptacle missing and replaced by a second RJ45 jack a while ago (in this report where a lot of 'information' seems a bit questionable to me) Today @Icenowy confirmed existence of this board since Xunlong announced it in a chat group. I believe this is somewhat related to recently available Orange Pi Zero Plus since by looking at the picture we can see behind both Ethernet MagJacks small packages. My bet is we're talking here about RTL8211E (Gigabit Ethernet PHY connected via RGMII to the SoC) and RTL8153 (Gigabit Ethernet MAC/PHY USB2 Hi-Speed attached to the SoC). …

Hi, I have quiet a problem getting ipsec/strongswan running on my Orange Pi R1. IPSec is configured fine and it connects to my vpn gatway by establishing and ikev2 connection with the help of transform (xfrm) interfaces. After connection everything works fine, but not for long. When I transfer large amounts of data (e.g. iperf3) the whole Orange Pi R1 freezes suddenly. This occours almost immideatly, sometimes i get a couple of seconds a data stream, but mostly it freezes at once. Currently I use even the lates "Linux orangepi-r1 5.9.1-sunxi #20.08.14 SMP Tue Oct 20 23:01:54 CEST 2020 armv7l GNU/Linux" Kernel, and I upgrade…

http://www.orangepi.org/OrangePiR1/ Not sure how different it is from Zero other than the second ethernet port and new RTL8189FTV wifi. I'm waiting for a low cost dual ethernet box for a long time. Ordering now.

Hello, Could you please somebody advise me with hostapd issue? I installed on new Orange Pi R1 new Armbian: ARMBIAN 5.59 testing Debian GNU/Linux 9 (stretch) 4.14.65-sunxi Problem is, that after starting service hostapd system/kernel crashed Some short time is Access Point reachable, but then orange crashed. root@orangepi:~# cat /etc/hostapd/hostapd.conf interface=wlan0 bridge=br0 #driver=nl80211 ssid=Rubikon hw_mode=g channel=8 wmm_enabled=0 macaddr_acl=0 auth_algs=1 ignore_broadcast_ssid=0 wpa=2 wpa_passphrase=xxxxxxxxxxxxxx wpa_key_mgmt=WPA-PSK wpa_pairwise=TKIP rsn_pairwise=CCMP …

Hello All, I have configured OrangePiR1 as router. There are three network interfaces, two as wired and one wifi(hotspot). eth0 serve for access to internet(via ppp/adsl) and eth1+Wlan0 for internal network. Interfaces eth1 and wlan0 are in bridge br0. Problem is, that interface eth1 sometimes loses connection/link(cable and switch were checked ). Next nonstandard behavior of eth1 is, that only yellow led control is blinking, while green led control is not alight. Network interfaces were configured via file /etc/network/interfaces. However, when I checked network manager nmcli, I saw, that some connections are configured there too (there can …

Hi all, I'm new to this forum, but I frequent the LinusTechTips forum a lot, some of you may recognize it. Any way, my issue is with my Orange Pi R1. I've tried both Ubuntu Server and Debian server images and I can't seem to get either to work. I'm using a good OEM Samsung wall wart that can supply up to 2 amps, and I'm using a 32GB Sandisk microSD I pulled from a working Raspberry Pi 2. With the Ubuntu Server image I can get in on the first boot and make a new user, but once it reboots to expand the filesystem it seems like it'm outta luck. I assume the red LED flashes when the kernel is running as normal, and after the first reboot the red LED never flashes, I can'…

Hello folks! I'm investigating an odd issue of the OPi R1 board, with the image Armbian_5.83_Orangepi-r1_Debian_stretch_next_4.19.38. With this version of software the board works fine, but apparently the wifi cannot reconnect after a disconnection (error: association request to the driver failed) The only workaround I found is to manually bring down the wifi interface and then back up; then the reconnect is almost immediate. I tried to disable the NetworkManager and now I'm using /etc/network/interfaces file to handle the connections but the problem still persists. I checked the issue with another R1 board and so I can exclude that the boa…

Hi. I'm using "Orangepi-r1_focal_current_5.8.5" Armbian. I'm connected to it via Wifi. Everything working fine, but after few hours, I notice that it is no longer showing on my network. If I connect by cable I can ssh to it via ethernet without any issue and it stays available for several days without disconnecting. Any idea why this happens? when Wifi disconnects I will have to reboot to show it again. And I am not running any program on it. Is orange pi r1 wifi like orange pi zero wifi suffering from poor software support?

Hi, Thank you very much for all the work. I recently purchased 4GB RAM version of Orange PI RK3399. Was able to install armbian WIP version: 4.4.180-rk3399 I'm trying to capture video via HDMI IN port using gstreamer but I see the following error messages in kernel log, Spoiler Jun 12 03:19:37 localhost kernel: [ 3.956986] tc358749xbg 1-000f: probing... Jun 12 03:19:37 localhost kernel: [ 3.957006] tc358749xbg 1-000f: GPIO lookup for consumer int Jun 12 03:19:37 localhost kernel: [ 3.957016] tc358749xbg 1-000f: using device tree for GPIO lookup Jun 12 03:19:37 localhost kernel: [ 3.957101] tc…

Hello Still I could not resolve network problems with orange pi plus. My configuration: Orange pi plus with heatsink, (image Armbian_5.05_Orangepiplus_Debian_jessie_3.4.110), external USB drive(partition ext4). Main problem - when copying large file into samba share network hangs on orangepi board. CPU temperature not exceed 50C when copying. Leds blinking near ethernet cable but ping from cli works only on local ip. Same situation with other orange pi images (debian, lubuntu and ect...) Please help

Hi , I'm using orange pi lite (H3) and armbian xenial desktop. When I plug in my adata 8GB flash drive armbian couldn't find it. What should I do?

I just bought an orange pi pc and i want to hook it up to an old pc monitor i had laying around. The monitor requires 60 Hz and a resolution of 1024x1280, it uses a vga port. Is there any way to get this to work? Regards AcidWizard

Hello Ones again I`m would like to connect 1 LED to GPIO and make it blink . I try to find tutorial on Wen but for OPI Win it`s not work (duo to lack tutorial for this models) Could You help me wrote simple code to make LED start blinking? With program included in Armbian to steering GPIO for my OPI Thanks in advance.

Hello few day ago I install one again ARMBIAN in my OPI WIN PLUS this version https://dl.armbian.com/_old/orangepiwin/archive/Armbian_19.11.4_Orangepiwin_bionic_current_5.3.13_desktop.img.gz When I was typing armbian-config The loading config setting was missing sudo apt-get install armbian-config and after install. when I login via putty I see screen like below before that I don`t have any main screen Could You advice what`s heppen (when I was first install those image (.5.3.13_desktop.img.gz) I`m remember the OPI WIN screen.

Well, the title is self explanatory. I am trying the new stable release for the Orange PI win from armbian (thank you guys!) but when booting for the first time in headless mode via SSH through Ethernet cable it gets stuck at "Enter new UNIX password". I put the new password and nothing happens. If I unplug the cable to force the SSH server to close the connection and then I plug it back again, the password is kept the old one (default 1234) and the problem repeats. After some tests I finally got to change the password, but it gets stuck after, or even before sometimes if I reboot. It seems that the SSH tunnel is simply not stable. I should mention that the configura…

Hi guys a having problems to boot the latest armbian buster 5.3.Y kernel on the orange pi win plus. I tested other older kernels(4.19 and 3.xx) and worked fine except for Bluetooth and WiFi hotspot. I am trying to upgrade to buster 5.3 but always as result kernel panic(same on bionic and stretch 5.3). power supply is ok and tested on 3 microsd card. this is the debug information from an ttyS0 consoles it is continues rebooting. need some help debug.txt

Orange Pi Win Plus - no screen image after uboot, during uboot operation, the image on the screen is present. Are there any assumptions how to fix this? i tried use image from orange pi win, looks like boars a similar, difference only in wifi and 2gb memory instead 1gb;

Hello, I've flashed my SD card with Armbian_5.41_Orangepiwin_Ubuntu_xenial_default_3.10.107_desktop and after booting the system everything works like a charm except my sound which I've tried to get through the 3.5mm jack. I've done upgrade && update but that doesn't seem to help. I've tried several headphones and speakers and none of them worked. On top of that I've tried flashing this image file on one other microSD card and I've tried running it on another Opi Win Plus board since I have several of them lying around my house. Regarding my power supply, it's 5V 3A which I've read is the appropriate one. I'm fairly ne…

Hi guys, I've been busting my head for days now trying to find a way how to permanently change MAC address on my ehternet on Opi Win Plus boards but nothing yielded positive outcome. The reason I need to permanently change MAC address is because I'll be running 6 of these boards on the same network and since all of them have identical MAC it's impossible for my router to manage them properly. I'm running Ubuntu_xenial_default_3.10.107_server with legacy kernel. I've tried changing the /etc/network/interfaces file by adding hwaddress ether xx:xx:xx:xx:xx:xx , changing from static to dhcp and doing all sorts of combinations in hopes that so…

Hello I upgrade my last version Armbian and after shutdown the system the next day armbian won`t start. I download newest version burnd SC card an after loading is restarting 30 times. So I change new sd card burn one again armbian and is the same. I use converter from HDMI do VGA - and my experience is that converter very stress CPU so i connect directly to TV with HDMI but is the same Could You advice how to install Armbian on my OPI WIN PLUS. Regards\

I bought orange pi win plus and I began to use armbian. Nearly everything ok but I can not use my bluetooth keyboard. There is a bluetooth symbol and I can enable it but when I wanna add my keyboard it says no adapter found... Please help me ..

Hi everyone, I am experiencing a persistent boot issue with my Orange Pi Win Plus running Armbian, used as a headless server. The Problem: Whenever the board suffers a power loss (unplugged) or I issue a system reboot, it fails to start automatically. The power LED stays on, but the system/network never comes up. To get it to boot, I have to go through a frustrating manual routine: manually holding/pressing the power button, sometimes plugging/unplugging the HDMI cable, and repeating this process a couple of times before it finally kicks in. What I have already checked/ruled out: Power supply is NOT the issue: I have tested multiple different power ada…

Good day! Tell me if there is support for hardware acceleration Orange PI WIN PLUS Cortex-A64 ?? I try to run a video (vlc,mpv) but it is very slow =(

I need help. I builded image Armbian_5.67_Orangepiwin_Ubuntu_bionic_next_4.14.81_desktop. Ethernet don't work. Wi-Fi is Ok. When I tested image Armbian_5.59_Orangepiwin_Ubuntu_xenial_default_3.10.107_desktop Ethernet and Wi-Fi worked on the same board. armbianmonitor -u System diagnosis information will now be uploaded to sysctl: permission denied on key 'vm.mmap_rnd_bits' sysctl: permission denied on key 'vm.mmap_rnd_compat_bits' sysctl: permission denied on key 'vm.stat_refresh' http://ix.io/1s78

Hi I installed armbian on orange pi plus win and I sow the resolution isn't good. so I tried h3disp command but I got this What is the resolution software in this model? I tried to install h3disp but it isn't in repository!

Has anyone been able to successfully install rpimonitor on an Orange Pi Win Plus (A64)? I have been able to install it, but I get a lot of invalid readings. As you can see in the screenshot, it is not able to detect cpu frequency, vcore and temperature.

Hello, recently i bought Orange Pi Win Plus board and have installed Armbian (Ubuntu xenial server) on it. With stock kernel linux-image-dev-sun50iw1, linux-headers-dev-sun50iw1 and linux-dtb-dev-sun50iw1 all hardware working ok except USB DVB tuner myGica T230, needed for me, which has not enabled in kernel configuration. I found linux-image-dev-sun50iw1 (https://www.armbian.com/kernel/, section Allwinner A64), its sources and etc has been removed from Armbian repository. This is question N1: maybe someone has sources for this kernel for build? Today i'm trying to build 'next' and 'dev' kernels for this hardware in Ubuntu 16.04 VM 'DEV'…

Hello friends; I have board which Orange Pi Win Plus running Armbian. My problem is, boards 7, 8, 10 and 16 physical pins are not working. When I tried to I/O with this pins, console says: Segmentation Error. Is it possible to fix it or is it normal? Thank You.