Allwinner sunxi

I have a OpiZ2w with Armbian. I flashed a SD-card, and then I copy the system and boot to a usb- hdd (sda) and the system boot to sda Want hdd because It write much data and USB 2 don't take mush more speed. But I get a warning about a file-error or something so I run fsck on sda(hdd) was a systemdisk, but run read-only, but anyway it does not boot any more I think I can take the usb-hdd and run fsck from another computer? I have one system with Ubuntu on a Intel 6 gen, and Raspberry pi 500 and 5. The Pi-machine have raspberry-pi OS and the other Ubuntu 24.04.Does the machin or system have any singificans? Or is there another fix to…

Hi, I have Orange Pi Zero v1.5 with Armbian Buster (mainline kernel 5.4.y) and I would like to use the serial_rs485 struct from user-level. It is possible?

Booting my A20-OLinuXino-MICRO with the Armbian_5.20_Micro_Debian_jessie_4.7.3.7z (freshly downloaded) image from SD card hangs with these last log lines: [ 17.564273] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 384000 KHz [ 17.599267] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 528000 KHz At the start of the boot, there are also some bad looking error messages from U-Boot: Failed to set core voltage! Can't set CPU frequency Trying to boot from MMC1 U-Boot 2016.09-armbian (Sep 15 2016 - 05:13:34 +0200) Allwinner Technology CPU: Allwinner A20 (SUN7I) Model: Olimex A20-Olinuxino Micro I2C: ready DRAM: 1 GiB M…

An interesting fact (at least from what I can tell), the NanoPi Duo (v1.0 and v 1.1) has no builtin PUDs. Checking http://wiki.friendlyarm.com/wiki/images/8/8a/Schematic_NanoPi_Duo-v1.1.pdf and I see no PUDs on the GPIO schematic. Is this true? Is the Orange Pi Zero the same way?

Hi Everybody. Can anyone publish step by step guide of building working solution of orange pi PC + ov5640. I mean something like: 1. Buy this ov5640 camera 2. Buy this cable 3. Connect so ... 4. Download this OS image. 5. Change this and that in configuration files Thank you P.S. I spend 2 days reading forum but still don't understand how to get work my Orange Pi PC + ov5640

Hi there, tomorrow I should obtain my OPi Zero Plus2. I see it does not have USB port (just GPIO for USB, so I could solder USB port for it with GPIO, no problem). Then, I will need to install my own raspbian.img on eMMC (I am using read only system). Till now I installed it on many SD cards to another Opi Zero's and used it so (because of lack eMMC). But how to install it on Opi Zero Plus2? Do I need to install it on SD card first and then go with nand-sata-install? Honestly, I would like to install it (the best) with USB or some other way, because I will need to install dozen of pieces and it is pretty time consuming to install if from SD ca…

Does anyone use an infrared remote control with the Lirc / rc6 / mce program..and have a verified configuration? I can't configure the above to work on Orange pi 3 lts But I want the Lirc program and not the ir-keytable 🙂

I am getting a quite loud audio spike / noise sound at the end of an audio play in python when using the following script: https://gist.github.com/bbence84/04d1935a92a4b4ab3d44bf182ea4bcc1 Wav to be played, but it does it with any other wav or mp3 file: https://easyupload.io/vbat12 It uses the speech_recognition package and the preferredsoundplayer package, but also the VLC python package shows the same when playing the audio. When changing the audio play to be non-blocking for the python script, the issue goes away... Very strange. This is driviging me nuts. I'm on Armbian 22.11.1 Jammy / 22.04.1 LTS, kernel 5.15.80-su…

Hi all Im just got to play with orangepi plus 2e with armbian. but i encounter allow of system hang after few hrs of usage. anyone encounter this? Current Arambian verison- OS: Ubuntu 16.04.3 LTS Kernel: 3.4113-sun8i Frimware: #8 Boot and storage: EMMC Desktop: Yes service/application install- Gparted Octoprint MJPG-Streamer thanks alot

I just installed a fresh armbian 5.38 (mainline kernel) image to an SD Card for my A20-OLinuXino-MICRO board. After booting I used armbian-config to enable the spi-spidev. I then edited the armbianEnv.txt directly to add param_spidev_spi_bus=0. This gives me a single spidev0.0 under dev. Changing the parameter to param_spidev_spi_bus=2 (or 1) I can get the other busses. But only a single bus at a time. I spent I few hours googling, but I cannot seem to find any documentation on how to enable more than one userspace spi dev. Could someone explain to me how to enable all spi devices at once? Writing a custom overlays myself is a little beyond me at t…

[H5: Nanopi neo core 2] I observe the UART Rx line to be influenced by the RTS line which I am using during sending. Is there a way to enable an internal pull-up on Rx so that this doesn't happen? I suspect it's the cause of communication errors that I observe. I confess that I am currently on a FriendlyCore 4.16 build, but I wouldn't expect such an issue to be too distribution-specific.

I bought a Cubieboard AIO A20 Einstein and wanted to install Armbian. Is there an image I can use to get access to this board? I tried a few images following the install with sd card with no success. I have gone back and forth burning images, reformatting the drive, test and trying again. I'm a newbie but I have completed several installs on other machines just not one like this. I'm outside my comfort zone but keep on trying. I can install to msata and boot from that and there are boot settings in the Cubie desktop. Knowing what image to use (if any for Cubieboard AIO A20 Einstein) moving forward would be helpful. Any other tips, suggestions, how to's, and successes wou…

I can't get my Orange Pi working... After writing image to a SD card, the system boots up and the green LED lights up. Everything looks ok, until "Starting kernel..." line. After that the screen goes all black or displays artifacts. I tried different HDMI cables but still same issues. I've been trying with 5.25, 5.30, 5.35, 5.38 Ubuntu versions. I found out that the only way to get the system up and running was installing version 5.30, because the system boots with 720p mode. Other builds use 1080p mode. However when I "apt upgrade" the kernel, system boots with 1080p and the issue shows up again. Is there a way to "force" Armbian to use 720p mode by default?

Hey folks, I'm hoping for some advice on achieving decent graphics for my application. I've got a prototype running with a custom board hosting the NanoPi Neo Air and a bunch of my own hardware. The biggest issue right now is getting reasonable graphics performance. The difference between mainline and legacy support has had me confused and switching back and forth trying to find a useful solution. Here's what I've learned so far: Mainline feels like the future, so that's my preference. My application uses fbtft over SPI for the graphics. I achieved 72MHz SPI on mainline which gives almost reasonable performance. On legacy the SPI driver seems buggy and …

hi Orangepi plus 2e; Armbian 5,38 with Ubuntu xenial 16.4 Normally my OrangePi works pretty fine, but today I tested lirc. I activated lirc by armbian-config, changed something in /etc/lirc/hardware.conf Spoiler /etc/lirc/hardware.conf REMOTE_MODULES="sunxi_cir" REMOTE_DEVICE="/dev/lirc0" REMOTE_LIRCD_CONF="" REMOTE_LIRCD_ARGS="" #Enable lircd START_LIRCD="true" #Try to load appropriate kernel modules LOAD_MODULES="true" DRIVER="default" DEVICE="/dev/lirc0" MODULES="sunxi-cir" …

I used python script with Orange pi zero 3 (Armbian_community_24.8.0-trunk.6_Orangepizero3_bookworm_current_6.6.31_minimal.img) Observation: 1) /dev/ttyS1 is actually Serial 2 as per pin diagram as per Orange Pi Zero 3 - Armbian web page 2) /dev/ttyS2 is actually Serial 5 as per pin diagram as per Orange Pi Zero 3 - Armbian web page 3) even if I set rtscts=True in crateing object ser in above script, there is no output on rts or cts pin. I am looking forward to have RTS pin remain high during transmission to easily integrate ic for RS485 communication. I was glad that Amrbian for Orange Pi Zero 3 has out of the box RTS CTS pin suppor…

Hello. I reactivated my old BananaPi M1 to measure some Temperatures by Dalla1820-Sensors. This is working like a charm and I could resolve all the Problems I had. But now I want to use also one GPIO-Pin as an digital Input (via bash) But all manuals I found in the Internet didn't work. Every Time i try to setup a Pin by sudo echo (Pin-number) > /sys/class/gpio/export I get the message, that I don't have the rights to do this. Could it be, that the GPIO are not usable, when I activated 1wire ? (of course I used a different Pin as I use for 1wire) Or must I activate some more options as only "w1-gpio" in the armbian…

Hello few day ago I install one again ARMBIAN in my OPI WIN PLUS this version https://dl.armbian.com/_old/orangepiwin/archive/Armbian_19.11.4_Orangepiwin_bionic_current_5.3.13_desktop.img.gz When I was typing armbian-config The loading config setting was missing sudo apt-get install armbian-config and after install. when I login via putty I see screen like below before that I don`t have any main screen Could You advice what`s heppen (when I was first install those image (.5.3.13_desktop.img.gz) I`m remember the OPI WIN screen.

I have an ap in banana pi whose ip is 192.168.4.1. And eth0 on banana pi whose static ip is 192.168.144.100. I would like to connect device A from banana pi's ap and also it can ping to the eth0. So far I had tried: sudo iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE sudo iptables -A FORWARD -i wlan0 -o eth0 -m state --state RELATED,ESTABLISHED -j ACCEPT sudo iptables -A FORWARD -i eth0 -o wlan0 -j ACCEPT

Hello everyone, asking your help as i'm getting a little bit crazy with my pi02w. I'm not able to understand why my board is not able to connect to wifi without the external antenna. I'll explain better, it seems that is able to find it, connect to but not able to work. I cant post the armbianmonitor log as no internet connection. Thanks armbianmonitor.txt

Hello, I've been using an OrangePi PC with legacy distribution for a long time as a mini-server, it worked Ok except for some seemingly random freeze. I'm using it with an unsupported monitor size (1600x1200), so I had a modded version, and I never updated the system files to avoid having to recompile. I'd like to update Armbian to the mainline kernel version, but I want to keep all my settings/additions/installed programs, so I'd prefer to NOT do a complete re-install. Is there a way to do an upgrade without losing everything?? If not, how can I keep track of all the modifications currently installed so I can re-install them? TIA

Hi all, I've connected a Serial-TTL converter to my Macbook Pro on one side, and an OrangePi Zero on the other, when I power up the Zero, I'm getting the following, what looks like an output with missing characters: I'm connecting with "sudo screen /dev/cu.usbserial 115200" and the adapter's driver in the network connections is set to 115200. The adapter is an Adafruit USB to TTL Serial Cable with a Prolific chipset. Any ideas?

Hello! I try use UPort 1150 on my OrangePIPC+ board, but got error misiing firmware. After lookup I check that this files was missed, so I copy from RaspberryPi4 board (with Armbian 22.04) moxa folder & ti_3150.fw, ti_5052.fw. Then after reboot all work ok. So, is this that I missed in configuration or this is a bug? Regards, Alex

I’ve been running Armbian from an SSD for a while using this guide: https://jamesachambers.com/orange-pi-zero-2-usb-ssd-boot-guide/ Recently, after running apt update && apt full-upgrade, the following issues have occurred: 1. Wi-Fi adapter is no longer detected. 2. CPU utilization exceeds 80% when accessing the Gnome launcher or starting GUI apps (e.g., a web browser, even without opening a webpage). 3. The system becomes laggy and nearly unusable, noticeable when moving the mouse. Are there recent changes to Armbian that affect SSD booting? Is there a workaround for these issues?

Hi, i've a tablet that has an Allwinner A20 socs. Can i install armbian? Which are installation steps? Thank You Luigi

Hello all, If i detach battery all works ok. With attached battery system reboots instead of shutting down. Anyone experiencing this issue again with 5.4.21 kernel? Is there a workaround to solve it, maybe in u-boot or somewhere else? Armbian 20.05.0-trunk built from source Thank you

Hello, I am trying to communicate using UART PORT. I have connected to 8, 10 and GND pin. Also I enabled UART3, but it doesn't work. Any solution? Thanks !! Enviado desde mi iPhone utilizando Tapatalk

I can not install the plugin because of the missing of linux-headers-4.8.4sunxi Did anyone tried to instll this on a banana pi pro

Source for kernel in package : linux-source-4.19.38-next-sunxi is for 64BIT architecture , is not possible to get source for 32bit architecture

Hi all, I'm puzzled how everybody is building clusters of cheap SBC's, but nobody is implementing HA, redundancy, resiliency, failover, etc. They're just SBC's networked together. The SBC's are underprovisioned for Ceph, so I think that even if a Ceph configuration was managed to be shoehorned in, it wouldn't perform well. I don't know if DRDB is an option. How are people actually doing implementing real clustering technology on Orange Pi, for example? I'm using OPi+2E. Kind regards, Andrew

comes to adding 131068 swap on /var/swap and further loading is not How to fix it? tried a USB flash drive to the new record, it is still the same, a reboot is not helping

Hello, Is there anyone that has problem with USB keyboard on armbian 20.11.9 buster. I have tried both 20.11.6 and 20.11.9 buster nut the keyboard can't be recognized in armbian. (caplock, numlock LED don't work as well) I tried 4 USB ports on the port but doesn't work. The keyboard is working fine with my Windows PC. Thanks

Hi there 👋 I'm using a NanoPi Duo2 with Armbian 21.08.1 Bullseye and Linux jenkins-agent-arm32 5.15.93-sunxi #23.02.2 SMP Fri Feb 17 23:49:46 UTC 2023 armv7l GNU/Linux I want to use an SPI screen on it, but I don't know which library to use to handle the GPIO... I've tested quite a few and none of them seem to work. I have enabled SPI and I2C in `armbian-config` and `sudo i2cdetect -y 0` works (even if nothing is found), but what is the next step? sudo i2cdetect -y 0 [sudo] password for poddingue: 0 1 2 3 4 5 6 7 8 9 a b c d e f 00: -- -- -- -- -- -- -- -- 10: -- -- -- -- -- -- -- -- -- -- -- --…

I've tried both revisions (Bionic and Stretch) for this board located at: https://www.armbian.com/orange-pi-pc/ Both have the same issue. When I boot from sd card, run armbian-config, and attempt to transfer armbian OS to emmc I get an error 'no target'. I know that there is indeed built 8GB flash, because when I pull the sdcard, and power the board it boots into the pre-configured android OS. Here is a picture I took of the board: https://photos.app.goo.gl/5ELPTTnPbZXAybhe9 Any advise would be helpful. Thank You.

I am using Olimex Lime 2 Emmc Rev.k for a project. One of the Boards shuts down randomly. Its not a freeze or a sudden power down of the board. The board undergoes a complete shut down procedure. I checked the log entries in /var/log/syslog log file. There is a entry of board going to shut down but I couldn't find the reason for shut down. Is there a way to find out if the board got shut down because of the Power-button press, shutdown command from a SSH client, shutdown because of temperature or shutdown because of under voltage ? Is there a log file i can check to find the reason for shutdown?

Hi, I have some issues regarding the Orange Pi becoming non responsive and only accessible. When I look at the log, i just see an sudden stop of writing to the logfile. And this line: [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B Is the mmc failing? I currently have 80 orange pi's installed. 20 of them have this issue. Is this an PSU problem? Some external persons said that they had an problem with installing two Orange Pi's on the same electricty net. But was not confirmed by me. I've added an logfile logfile.txt

Hi all, its probably something simple but here is what i am struggling with: airmon-ng start <interface name> iwconfig wlan1mon channel 13 aireplay-ng --test wlan1mon ifconfig wlan0 up -> wlan0 is configured and connected to the access point packets are injected and can be observed with another machine ifconfig wlan0 down / or not associated with network packets are not injected and cannot be observed aireplay-ng or raw socket directly shows no errors initial toughs somewhere there is a switch to enable/disable radio at low level nothing obvious in strace tried with and without network manager…

I'm testing the GPS PPS function. If I use PA7 (GPIO PIN 12 in OrangePI Zero), get nothing. But if change to PA3, (GPIO PIN 15), it works well ether pps-gpio module or gpsd itself. Is any strange stuff on PA7?

i have an Orange Pi Zero. I add a simple Soundcard with sound in to the USB. I want to stream the sound comes from the AudioIn (usb) in to my local Wlan. What do i need? Is it possible with icecast2, darkice and Pulseaudio like in this Tutorial: https://michaelfranzl.com/2013/11/25/audio-streaming/ ?? or there other ways? thank you for help.

Hi form germany, i have problemes with my M1. The system hangs and only ping is working here the last timestamps: do, 14.04. 18:00 so, 01.05. 2:45 do, 05.05. 3:00 mo, 09.05. 15:22 i use Armbian 22.02.1 Focal with Linux 5.15.25-sunxi homeassistant + portainer (docker) mosquitto samba with sata 500gb ssd do we need some other logs? thanks to this nice work 🙂

Hello, I am still using my cubieboard1 for openhab2. A few days ago I installed the system on an USB stick, then I thought that the 32Gb SD card is the for nothing. And I am planing to replace the 32GB sd card with a 128MB sd card. but i am stuck in prepairing the smaller SD card. Could somene advice me how to do this change? Until now I just formated the small sd card into ext4 and copied the /boot from larger sd card, but didn"t booted. Help is much appreciated.

I'd like to install the latest Armbian for Orange Pi PC, but want to remove GUI / desktop packages and use CLI only. I can't find any docs on how to create a tailored distro without GUI (and associated) packages. So I guess an alternative is to install a standard legacy distro, then trim out the GUI (and likely other) packages as desired. Any suggestions or documentation? Thx.

Hi, I Would like to connect orangepi PC to 1280x1024 dvi monitor, as I used to with few years old armbian before. Tried h3disp but it reports that board/kernel is not supported. Is there some new method for that? Also it looks like armbianmonitor can't upload system info anymore.

Hi, I a couple of days ago, I picked up the Mainline 4.9.7 Jessie image. It ran flawlessly untill last night when I installed samba/minidlna and mounted my hdds (3 usb hdds on a powered USB3 hub and 1 sata 3.5in hdd). When the minidlna was updating its library and keeping cpu usage up and while I was doing some network traffic the CT froze. I thought this was a physical network issue and I bonded the wlan0 and eth0 so that wlan0 acts as backup when eth0 is down. Usually I log on with ssh and keep this headless, but I remembered that I had the tv connected to the hdmi. I attached a pic (sorry for the quality) of the error message. It seems som…

Hi, This will be my first time using Armbian and OrangePi, sorry if theres stupid questions. I want to write a C++ application that uses LVGL to display information on a USB screen and have a few questions. 1) Will I be able to this screen in this setup. It uses the frame buffer (/dev/fb0). There are instructions for RaspberryPi, where its just plugged in and the frame buffer is available to use. 2) If I just use the latest Armbian Ubuntu version for this board what is the newest version of C++ I can use? (C++11/14/17 etc) 3) Is there a tool chain available to be able to cross compile my application (specifically from…

Hello, I would like to download the Armbian Buster image. This is not possible due to missing links. The Bionic is download link is working though. Sheers

Hi everyone! I have v25.8 rolling for radxa cubie a5e running Armbian Linux 6.14.0-rc1-dev-sun55iw3 runnig and it has only ttyS0 serial device. Due to device schematics it should be able to provide serail interfaces with RTS/CTS support UART4-7. Was anyone able to activate this devices? As I understand, I need an overlay .dtbo files. But those cannot be found anywhere in /boot. Also I can compile those overlays, but I need the correct .dts files.

Hello, I'm using a BPI M2 Zero (with H3 Chip) to control two relays on CON2-P05 / PA11 and CON2-P03 / PA12. During the boot process there is a high level present at the pins, which is driving the relays. Is there a way to create a DTB overlay to drive the pins to a low level during boot. My userspace application uses libgpiod to control the pins. I'm familiar with compiling and activating overlays, i would just need help to write the correct .dts file. Thank you very much in advance

Attempting to connect ILI9341 LCD with XPT2046 Touch to NanoPi NEO Core2 and then migrate to NanoPi Duo2. The ILI9341 / XPT2046 peripheral board has shared SPI with a separate slave chip select for the screen and touch controllers. Starting with hardware datasheet for the H3 I see there is lots of support for different chip select implementations. This makes me think I am on good footing from a hardware perspective. What is not clear to me is how the register support for four slave chip selects translates into pin assignments. Reading through spi-sun6i.c., for example, static int sun6i_spi_transfer_one( ... ) uses SUN6I_TFR_CTL_CS_MANUA…

How enable tv out on mainline kernel 4.19? script.bin not found and stevenj/h3-tve not working on my version of kernel.

Greetings! It's not a influential or serious bug. I couldn't control the LEDs on Orange Pi One Plus by the command setleds, So I navigated to /sys/class/leds, and there are two items: orangepi:green:status@ and orangepi:red:power@. I tried to do echo 255 > brightness respectively and found that: orangepi:green:status@ controls the RED LED, while orangepi:red:power@ controls the GREEN LED. Please tell me if it's a minor bug or an intentional setting, thank you.

Hi I have installed the latest image for Orange Pi Zero v1 https://dl.armbian.com/orangepizero/archive/Armbian_24.2.1_Orangepizero_bookworm_current_6.6.20.img.xz link from https://www.armbian.com/orange-pi-zero/ After the first boot, I see that it is kernel 6.6.20 Welcome to Armbian 24.2.1 Bookworm with Linux 6.6.20-current-sunxi Linux version 6.6.20-current-sunxi (armbian@next) (arm-linux-gnueabihf-gcc (Ubuntu 11.4.0-1ubuntu1~22.04) 11.4.0, GNU ld (GNU Binutils for Ubuntu) 2.38) #1 SMP Sat Mar 2 17:23:09 UTC 2024 and when I run apt update& apt upgrade apt list --upgradable Listing... Done armbian-fir…

Good morning, I have a NanoPi Neo Core that I want to use to generate a PWM wave. As far as I understand, the pin for this is PA5, which is shared with UART. However, by using the corresponding overlay, the UART would be disabled, and PWM would be enabled. Is that correct? What would be the next steps to verify that this is correct and to generate the PWM wave? Is there a specific command to do this? Thanks for your help, and best regards!

Hi, I'm using several Orange Pi Zero boards. At any given time, when I run "reboot now", I can no longer access the OPI via ssh. I tested the following distributions: Armbian_5.25_Orangepizero_Ubuntu_xenial_default_3.4.113 Armbian_5.59_Orangepizero_Ubuntu_xenial_default_3.4.113 All the programs I installed, which start from boot normally work, but I can not access via SSH. Is there any corruption of ssh files? Thank you for your help

Hi, I am newbie in Debian. I have an inquiry regarding this matter. I am having USB Wifi Dongle installed @ my OPi Zero H2+. It has built-in NIC (Eth0 & WLAN1) for the Debian Stretch. I am using this PI for the FlightAware purposes. 1. I connect to Eth0 from the beginning to access SSH and update all required updates. 2. I use nmtui for the USB Wireless connected to the Wireless AP. 3. Reboot the PI. 4. Install my PiAware 3.5.3 as per their instruction. 5. All Installed without any issue. I noticed that the MAC address of the USB Wireless Dongle is as follow:- wlx7c8bca1f3ad1: …

Hi I am new in the forum and the happy owner (as of yesterday) of an Orange Pi Lite. Nice little board. I managed to install Armbian server, configure Wi-Fi upgrade and install apache / php and mrtg. I also was able to enable one wire protocol to play around with a DS18B20 thermometer. My idea is to create an automated garden watering system with nice stats (graphs) I already have a 4 channel relay board (to connect solenoid water valves), a DS18B20 to sense temperature, an LDR to graph sunlight hours and 4 hygrometers --moisture sensors--. Those I want to connect through an I2C ADS1115 ADC module (which I also already have). …

Hi all! Has anyone some experience with dts overlays for the mainline kernel 4.14.47? I connected the SHT11 temperature sensor to PA7 and PA8, installed the sht1x.dts overlay from https://github.com/armbian/sunxi-DT-overlays/blob/master/examples/sht1x.dts via "sudo armbian-add-overlay sht15.dts" and afterwards looked via dmesg into the kernel output. That's what my OPLite reports: It is a kernel IO error. The LogicAnalyzer doesn't record any pin toggle. But what am I doing wrong? Do I have to deactivate the pins in GPIO driver? Can someone please help me? As I soldered the SHT11 by myself I modified some RPi userspace code to v…

Guys please help me. My orange pi one with Armbian installed and running Pi Hole. The HDMI Output is not working, And when I try to enter this command h3disp [-h/-H] -m [video mode] [-d] [-c [0-2] it say access denied. My point is there's no output this play on my device. I hope someone understand me and help me thank you.

Anyone with a full functionging Retro OrangePi on OPI PC using just analog out(NO HDMI)? Need to know what I'm missing. EMU Analog - Video = working Analog - Audio = working Controller = working GAME Analog - Video = working Analog - Audio = NOT working Controller = partial working Once game start, no sound until exit.

Hi, I use orange pi pc plus with armbian bionic, firstly I use it with a SD card and the temperature its around 30 centigrade degrees, its ok. Then I use EMMC without SD card and the temperature increases to 51 degrees (I think it´s very high), they are some way to use EMMC without the board increases the temperature?? Best regards, Nelson

I don’t own banana pi but I’m thinking of buying it for the project we’re going to do. I have raspberry pi zero but mediapipe is not working. Can I install this library on m2 zero? I would be glad if you help. Thank you.

Hello. How I can to set the 480x800 resolution? I have LCD display with portrait orientation and no one display mode from h3disp does not fit. On boot display is working fine, but after booting everything is bad. Booting video: After booting:

I've already tried adding the /etc/modprobe.d/usbhid.conf file to the options usbhid mousepoll = 4 but without success. I also tried to add in the / etc / modules file the lines -r usbhid usbhid mousepoll=4 I already looked at the usbhid blacklist and it is not in it could someone help me with this?

When I change the country and keyboard settings with armbian-config, the keyboard change from qwerty to azerty but after a reboot, the keyboard is qwerty again. The country code stay correct as set in the config.

Hello. this is my first post. I was looking through the forum but I did not find a similar problem. About power supply - until now I did not have any problems, I use a computer power supply. After a few months of non-use of my device, I downloaded an updated, latest version (Armbian_5.38_Lime2_Ubuntu_xenial_default_3.4.113_desktop) to an old, previously functioning card. When I connected the device, it did not turn on. I tried to turn it on manually, but nothing happened except the short flash on the connected mouse. A while ago, I uploaded an older desktop version to NAND. I used the sd card to start up. Is it possible that this older version loaded on NAND c…

Hello everyone, After many investigations, it was found that its function configuration was incorrect: | \ | | _ \(_) | \ | | ___ ___ | \| | |_) | | | \| |/ _ \/ _ \ | |\ | __/| | | |\ | __/ (_) | |_| \_|_| |_| |_| \_|\___|\___/ Welcome to Armbian 21.08.2 Focal with Linux 5.10.60-sunxi System load: 65% Up time: 0 min Memory usage: 15% of 491M IP: 192.168.4.107 CPU temp: 52°C Usage of /: 8% of 29G Last login: Thu Sep 30 15:58:24 2021 from 192.168.4.98 sam@nanopineo:~$ gpio readall +-----+-----+----------+------+---+-NanoPi-NEO--+------+----------+-----+-----+ | BCM | wPi | N…

Hi, I try to connect Orangepi lite to SIM800l module. I don't have any response on AT commands. I checked the module with Arduino and it works. So I connected Arduino and Orangepi and I can send messages from Arduino to Orangepi, but I can't get any message from Orangepi to Arduino. 1, On Orangepi I allowed UART3 via editing /boot/script.bin [uart3] uart_used = 1 uart_port = 3 uart_type = 4 uart_tx = port:PA13<3><1><default><default> uart_rx = port:PA14<3><1><default><default> uart_rts = port:PA15<3><1><default><default> uart_cts = port:PA16<3><1><default><defau…

Hi everybody, I asked to forum in the past about game library for C but it is very hard to develop our software in C. As I told in the past, I don't develop a game, I using it to draw some graphs in 2d or 3d. I am here again to ask that, Is OPI Zero can run a game software from Monogame framework. We can port our windows C# software which is written with XNA framework to Linux enviorment with MonoGame. Thanks

terminal command to connect 1)wifi (using username and password). 2)hotspot os i am using is Armbian_5.65_Nanopiduo_Debian_stretch_next_4.14.78.

Hello again, I downloaded the latest Orange Pi Win Ubuntu server – legacy kernel and installed it. It works fine, but when I connect from my win10 notebook via ssh with “putty” or “Windows power shell” the connections stops after the input of the right password. If the Password is wrong i have to re type it. Service ssh status: pam_unix(sshd:sessions): session opened for user root (uid=0) So it looks like the ssh on my “OPI win” works, but on putty I have only a blinking cursor. When I connect ssh via my android phone it works, without problems. Had anyone ells this problem? greeting…

Hello, I am trying to connect an Android Phone in order to my NanoPi Air in order to be able to have access via IP (ssh, webserver...). I set a bridge to share different BT connections: brctl addbr pan0 brctl setfd pan0 0 brctl stp pan0 off ifconfig pan0 192.168.42.1 netmask 255.255.255.0 ip link set up dev pan0 I register auth agent: bt-agent -c NoInputNoOutput I register network NAP agent: bt-network -s nap pan0 I am able to connect but when I try to enable "Internet access" into my Android phone it fails. I can see in syslog log: Apr 2 16:26:28 localhost bluetoothd[2960]: bnep: Can't add b…

Hello, I am using the Armbian 22.08.2 Jammy with Linux 5.15.69-sunxi. When I issue "aplay /usr/share/sounds/alsa/Front_Center.wav" or "speaker-test -t wav" playback misses a few seconds from the beginning of the audio file. If I restart it immediately, I can hear the file playing correctly. Then I wait for a while, run it and the problem reappears. I read on this forum that people have had the same problem for years without finding a solution. Is there a solution or does anyone wise know what the problem is?

I want to use the OPI3, but I need 2 uarts, in 26 headers there is 1 availabe, but I need one more. Is possible to disable the debug, and use it for my application?

I found a problem about ethernet port leds in mainline kernel, legacy kernel is fine. the ethernet port has two leds, one is link-up (green), the another one is act (orange). In Normally, the green led keep light on when cable plugged in. And the orange led keep blinking when data coming or outgoing. but in mainline kernel (4.13.16-sunxi / linux-image-next-sunxi 5.35) ethernet port leds REVERSED. the green led keep light off when cable plugged in but light on when cable plugged out. I found that problem both in a new bought opizero and an old opizero. here is a short video record

Hi, my Banana Pi M2+ with Armbian Bionic doesn't see my access point on channel 13. I already set "REGDOMAIN=DE" in /etc/default/crda and also issued the command "iw reg set DE". "nmcli dev wifi list" shows a lot of other access points on channels 1, 6, 11, but not my own on channel 13. On the other hand, "iw list" shows: Frequencies: * 2412 MHz [1] (20.0 dBm) * 2417 MHz [2] (20.0 dBm) * 2422 MHz [3] (20.0 dBm) * 2427 MHz [4] (20.0 dBm) * 2432 MHz [5] (20.0 dBm) …

Please help. Hello everyone, please help me out. I urgently need to enable secure boot on my Allwinner H3 Nanopi neo core. I tried following the instructions from the forum https://forum.armbian.com/topic/3033-h3-soc-boot-rom-security-e-fuse/#findComment-84051 . But I couldn't burn the E-Fuse. At stage 5, when loading ./sunxi-fel -v -p write 0x2000 of the compiled code and checking whether the changes were applied, sunxi-fel sid/list/version doesn't work. I have to reboot the board, and then I see no result. Please help me solve this problem and burn it so that the bootloader signature is present and it is impossible to boot from the SD card using third-party means. Pleas…

Hi, im using an Orange Pi one with a camara. I bought it as a set: https://de.aliexpress.com/item/Orange-Pi-One-SET-9-Orange-Pi-One-and-Camera-Camera-with-wide-angle-lens-for/32660642513.html?spm=2114.13010608.0.0.8eWICb I've flashed armbian to the SD Card and fired it up. The Problem I have is, that I can't access the camara. Maybe I'm doing something wrong, or the camara is broken. What I've done so far, is following this tutorial: https://diyprojects.io/camera-2mp-orange-pi-unpacking-installation-test-motion/#.WSw0jbpuKUk and then red through following article: http://www.orangepi.cn/orangepibbsen/forum.php?mod=viewthrea…

Hello folks, I'm having trouble booting to Armbian. The green LED turns on, and the LAN lights work, but outputting to HDMI always ends in no signal. I have tried: - Using official Orange Pi operating systems, they work, but are unstable. - Using f3 to check if my SD card is corrupted/fake. Returns working. - Using different power bricks, will still turn on leds, but not output to HDMI - Using different Armbian kernels, no success Any ideas lads?

Is the Cubieboard 2 a true Mac Address or is random generated or fixed in firmware ? Thank you very much.

hi ( armbian stretch over orangepiPC ) i try to use OPI 5MP Camera OV5640 - Auto zoom with wide-angle lens for Orange Pi PC /Pi One/PC Plus/Plus2e However , video0 device doesnt appear on /dev/ folder. what can i do ? thanks

Hi I have issue to run bluetooth on OrangePI Zero Plus2 H5 with Armbian 4.14.63-suxi64 - what I donloaded from the armbian page where is my device and this image is supported. Wifi is working but I have issue tu run Bluetooth - I read many topics here but I dont understand what to do. Maybe Im doing some wrong. Can someone advice me what should be done, please. Current status after installation: * ap6212-bluetooth.service - LSB: Patch firmware for ap6212 adapter Loaded: loaded (/etc/init.d/ap6212-bluetooth; generated; vendor preset: enabled) Active: failed (Result: exit-code) since Thu 2019-10-31 08:45:14 UTC; 24min ago Docs: ma…

Hi, Im trying to modify the configuration of AXP209 in the A20-SOM204 to change the behavior of long and short press time to make a long press shutdown the board and a short press wake up, following the datasheet: http://dl.linux-sunxi.org/AXP/AXP209_Datasheet_v1.0en.pdf and trying with the register: https://linux-sunxi.org/AXP209#REG_36H:_PEK_key_parameter_settings but with not success. To wake up the board from standby we are simulating a POWER press as a response to an external signal rise up, but we need to NOT shutdown the board when it is already ON when this signal rise up, but after trying to change the AXP209 parameters, still, any instant press of P…

Could someone help with understanding of use DVK571 board with Cubietruck? an how to use it's pins with arduino shields?

Hello, I just installed the incredible Armbian on my OrangePiPlus. I can't find the EMMC Boot script nan-sata-install. Has something changed in the past I didn't noticed? with regards

Hello, as already described in this topic: https://forum.armbian.com/topic/5619-nanopi-duo-sound-delay/ I have the same problem with delayed audio. -> " if I run speaker-test -t wav, instead of the sound playing "front left" it just play the work left, the continues playing "front left" correctly." When I run an audio-output-command two times, the audio is played well with the second command. But the greater problem in my case is a loud cracking noise when audio stops. Is there anyway to prevent the shutdown of the amplifier? I have to repeatingly start and stop audio files from nodejs. Thanks for your help, Jimmy

Just a FYI Previously using nmtui-connect and adding a Wifi Config would survive across reboots. With nightly: Armbian_5.26.170226_Orangepipcplus_Ubuntu_xenial_dev_4.10.0 I find that I must repeatedly use nmtui-connect and even then it creates additional NM connection profiles # nmcli c NAME UUID TYPE DEVICE MyWifi 60caede4-0d67-4e72-9696-6e9f76f9ec0a 802-11-wireless -- MyWifi 1 a4f778ff-e8b9-431c-ad70-98d3e32252bc 802-11-wireless -- No other OS mods (such as /etc/network/interfaces) were made After nand-sata-install only nmtui-connect was utilized

I was wondering if there is a significant performance difference with the lime2 when a heatsink is added? I plan on ordering a couple of heatsinks from ebay to try myself however I'm wondering if anyone from the community has any feedback. Thanks

Hello everyone ! I'm facing a hard issue that I still cannot solve. On my Raspberry, on Raspberry Os, to be able to use Rustdesk (https://github.com/rustdesk/rustdesk, an open source Teamviewer ) I needed to add some tweaks to the /boot/config.txt file: hdmi_force_hotplug=1 (See doc) hdmi_group=2 (See doc) Now, I'm trying to replicate these behaviours on Armbian for Opi zero 3 (but it could probably work for all Allwinner cpus if a solution is found) When looking on the Armbian documentation for Sunxi, I've found this (See doc) : For example to always use the hdmi connector, even if no cable is inserted, using edid info when available and …

Hello, i want to use my Cubietruck with an Portmultiplier. So, i want to add this Kernel-Parameter: How can i do this. Spider.Mann

Hello after reading and reading some more for a week, I have managed to boot the modified cubieboard2 /Einstein A20 board in GSOC to point I can run Armbian-Config and start a desktop. https://www.radioddity.com/blogs/all/xiegu-gsoc-teardown-open-source-project may or may not have access to ports internally if production board and metal can rf shielding-so wary of hosing uboot. I'm using Fat16 /dev/sda1 boot with original GSOC.dtb, I unfortunately have no access to original Xeigu BuildRoot on obsolete cubetech kernel. Armbian is on /dev/sda2 on same sd card I see that wifi and battery can be changed in human readable GSOC.dtb ,can this be…

For a new project with multiple socs, I want to use the NanoPi Neo 2 with the Allwinner H5 soc and boot from DHCP / NFS. I've done the same in the past for a setup with Raspberry Pi's, but the Allwinner socs require a different approach. What would be the best way to achive this? - FEL? - SD or USB with U-Boot? - any other suggestions?

Hello. I need to set a low level on a gpio pin PA6 on boot. I'm trying to do this through the device tree: /dts-v1/; /plugin/; / { compatible = "allwinner,sun8i-h3"; fragment@0 { target = <&pio>; __overlay__ { pinctrl-0 = <&pull_pins>; pull_pins:pull_pins { pins = "PA6"; function = "gpio_out"; bias-disable; output-low; }; }; }; }; I need to set PA6 to low. After boot, I see my overlay in device tree, but the level on the PA6 is still high. I can easily control the level through libgpiod (gpioset gpiochip0 6=1 or gpioset gpiochip0 6=0), it works. But I ca…

Hi , there I am trying to write a program which will detect the presence of SD Card in Nano Pi M1 plus device. There are many ways to do this either by doing fdisk -l or looking into /dev/mmcblk* . But I want to keep running it in a loop and doing fdisk -l and grep doesn't seems an appropriate way. Can the insertion or removal of SD cards be checked via Hardware Interrupts? Plz. help me I am a newbie. Thank in advance.

OrangePi PC H3 UsbTV kernel driver causes complete system freeze on Armbian OrangePi PC kernel 4.14. Did anyone observed similar issues? I already reported a bug against the USBTV repo, but not sure if this is the right place. [Update: After quick response of Federico Simoncelli from the USBTV repo, I reported this bug to the kernel bugzilla as a new bug there] On x86_64 platform it works well. Is it the bug of Armbian or USBTV?

hi, I'd like to ask regarding the behavior of eht: I want to use eth wire connection as primary ISP connection and wireless connection (using wifi dongle, different network) as backup ISP connection. But when I disconnect the cable physically, the eth0.101 subinterface is sill up, keeping it's IP address. Here's the config: cat /etc/network/interfaces # In real world, this is used on the same situations of auto but the difference is that it will wait an event like "plug the cable" on ethernet interfaces. allow-hotplug eth0 . . . # receive IP-Address from your DSL- or cablemodem auto eth0.101 # Replace "dhcp" with "manual" in the next line, if you are g…

I updated my system to the newest kernel and lost all WiFi. What is the deal???

I know that now mainline kernel is supported on orangepi zero so is there any way to activate the composite video output.?

Hello, I'm trying to connect a serial device on my nanopi neo plus2, but the gpio uart seems to be disable, please can you help me step by step? I found some things on forums but I understand nothing .... Thank you in advance

Cubieboard2 becomes unreachable on ethernet if the switch to which the CB2 connected to is rebooted/powered off then on. Every other devices communicate after the restart, except CB2, it needs an on/off to make its networking work again. Why? It has fixed IP, and also set fixed mac address, but no luck. It runs the latest armbian (5.38), with mainline kernel

Hi, When I scan the I2C with i2cdetect, I get the following, without connecting any i2c device. May I know which device on the motherboard is taking up the three addresses. Thank you sudo i2cdetect -y 1 0 1 2 3 4 5 6 7 8 9 a b c d e f 00: -- -- -- -- -- -- -- -- 10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 30: 30 -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 40: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 50: 50 -- -- -- 54 -- -- -- -- -- -- -- -- -- -- -- 60: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 70: -- -- -- -- -- -- -- -…