Rockchip

Hello, I am implementing booting animation to my source using plymouth without systemd when i run plymouthd it is showing logs like plymouthd --debug 00:00:22.972 ../../plymouth-0.9.5/src/main.c:1945:initialize_environment : initializing minimal work environment 00:00:22.972 ../../plymouth-0.9.5/src/main.c:1957:initialize_environment : checking if '/dev/tty1' exists 00:00:22.973 ../../plymouth-0.9.5/src/main.c:1823:check_verbosity : checking if tracing should be enabled 00:00:22.974 ../../../plymouth-0.9.5/src/libply/ply-utils.c:910:ply_get_ker: opening /proc/cmdline 00:00:22.975 ../../../plymouth-0.9.5/src/libply/ply-utils.…

I installed panfrost but glxinfo still lists the device as llvmpipe. I'm using Armbian_23.02.2_Rockpi-4cplus_jammy_current_5.15.93_gnome_desktop running wayland. This is how I built panfrost meson . build/ -Dvulkan-drivers= -Dgallium-drivers=panfrost -Dllvm=disabled ninja -C build/ ninja -C build/ install i have no idea what to do next because there is no errors that I can find and I was under the impression that with a kernel 5.1> it is supposed to work. Any help is appreciated

Howdy Is anyone having issues with speed negotiation? My rock 5b running an unsupported kernel is selecting 10mb instead of the 2.5gbe the zyxel switch is capable of. Thanks

ArmSoM-LM5 uses Rockchip RK3588, a new generation flagship eight-core 64-bit processor with a main frequency of up to 2.4GHz, a 6 TOPS computing power NPU, and can be equipped with a maximum of 32GB of large memory. It supports 8K video encoding and decoding and adopts LGA packaging, which has stronger transmission capability and stability. It has rich interfaces and supports multiple hard drives, Gigabit network, WiFi6, 5G/4G expansion and a variety of video input and output. Supports multiple operating systems; provides baseboard reference design materials, allowing users to customize in depth. Applicable to ARM PC, edge computing, cloud server, artificial intelligence,…

Armbian version: Armbian_5.65_Rock64_Ubuntu_bionic_default_4.4.162 the stuck prompt message: rock64 login: [OK] Started Update UTMP about System Runlevel changes. I MUST press enter key to continue the startup progress, please help me to fix the bug. Thanks very much

Good morning, I'm using RK3328 SOM-EVB by Olimex with Armbian 22.02.0-trunk with Linux 4.4.213-rockchip64. I'm using it with an HDMI LDC 7" capcaitive touchscreen by Waveshare (https://www.waveshare.com/product/displays/lcd-oled/lcd-oled-1/7inch-hdmi-lcd-h.htm). I can't rotate the LCD in portrait mode. In Application->Screen the "Rotation" section is "none" and there aren't any other choice (like left, right, inverted). If in command line I use: xrandr --output HDMI-1 --rotate left it gives me back: xrandr: output HDMI-1 cannot use rotation "left" reflection "none" Does anybody knows how to solve it and rotate the …

I'm trying to get a Rock64 board working with a wifi USB dongle, sold as RTL8188 and which is in fact a 8188eu. I use the latest armbian-buster as downloaded a few days ago. The dongle appears in dmesg when plugged in, but no module is loaded. I can manually load the 8188eu module and get no errors, but no wifi interface appears. Ifconfig, iwconfig and nmtui don't see anything they could use for wlan. I have installed the firmware-realtek package as well, it made no difference. I can get the module 8188eu autoloaded at boot, but that doesn't change the non-availability of a wlan interface. Any help appreciated. I have posted the armbianmonitor -u output in the…

I have a problem with touch screen, i must each time after power on calibrate touch screen. Looks like dont save parameters. Any help?

I am encountering a problem with my Orangepi4 where I am unable to get the Bluetooth connection to work properly with my speaker. Specifically, after connecting the Bluetooth, there is no option in the audio output settings to use the Bluetooth speaker as the output device. I have tried installing Bluetooth support using armbian-config and have also attempted restarting both the Bluetooth service and the system, but none of these solutions have been successful. Here is the system log for reference: (link to the log: https://paste.armbian.com/esohoyezit) I would greatly appreciate any assistance or guidance on resolving this issue. Thank you.

Hey I'am searching the Linux kernel headers for 4.4.162-rockchip64 only have found the 4.4.152 can any one help me? thanks

I updated my Rock-5b after a few months, but the latest edge kernel doesn't boot. Getting this on bootup: [ 38.709046] rockchip-pm-domain fd8d8000.power-management:power-controller: failed to get ack on domain 'gpu', val=0xaffff [ 38.710010] SError Interrupt on CPU5, code 0x00000000be000411 -- SError [ 38.710013] CPU: 5 UID: 0 PID: 449 Comm: (udev-worker) Tainted: G C 6.14.0-rc7-edge-rockchip64 #1 [ 38.710017] Tainted: [C]=CRAP [ 38.710018] Hardware name: Radxa ROCK 5B (DT) [ 38.710019] pstate: 404000c9 (nZcv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 38.710021] pc : _raw_spin_lock_irqsave+0x38/0x8c [ 38.710027] lr : regmap_lock_s…

Hello, I installed Armbian Jammy on Mekotronics R58, but at startup the system does not use all the space available on my emmc (64go). How is it possible ? How to correct this? Command: df /dev/mmcblk0p1 306580 142884 163696 47% /boot /dev/mmcblk0p2 15016152 13122848 1714556 89% / Thank you

Related to It looks like the problem's related to the USB autosuspend. Googling "xHCI host not responding to stop endpoint command." seems to say so. I've been trying to disable the USB autosuspend but no success. I followed all possible ways described in https://unix.stackexchange.com/questions/91027/how-to-disable-usb-autosuspend-on-kernel-3-7-10-or-above and https://www.kernel.org/doc/Documentation/usb/power-management.txt but $ cat /sys/module/usbcore/parameters/autosuspend always returns 2 Board: NanoPi M4, 4GB with Armbian_5.65_Nanopim4_Debian_stretch_default_4.4.162.7z

I have my RK3399-based device booting with my own working kernel and device tree. I want to erase the root partition and install Debian from one of the official ARM distros, but I'm not sure how to do this. Obviously, I can't just boot into the Debian installer like on an X86 machine. What I think I need is a root partition of a vanilla Debian install, because then I can just point U-boot to the root partition and Debian should boot (hopefully into an installer). What's the best way to proceed?

Hi! I have an rk3588 board that has a dma330 controller. I have this driver that essentially polls a dmac channel and it memory maps the data that is received into user space. Now, this driver was developed with the idea to receive data from a peripheral, however, before that I just want to test it by doing some memory to memory transactions. To that end I developed another kernel module that acts as a transmitter (code attached: aerietest.c). However, I am not able to link the transmitting end of the channel with the receiveing end. I added the following code in the device tree: aerie@0 { #dma-cells = <0x01>; compatible = "lyte-ai,l2"; d…

Hello, I am new to this forum and struggling with some stuff on the Tinkerboard S R2.0. I use the CLI-version of Armbian Jammy of 23 october 2022. I have to activate several features. I think two of them might relate to 'missing firmware'. 1. Activating a AccessPoint: during the installation of raspAP I get a set of error on 'missing firmware'. 2. Installing a modem: not a single USB-device gets recognized by lsusb. I am stuck at the very beginning. lsusb is working on the xfce but we want a leaner system. I tried the latest TinkerOS but I require a more updated version of python (3.10) and I also would like to stick t…

I have managed to install mainline u-boot on my 5B. i copied the 5It boots from both MMC and the SD. To boot from the sd, you have to interrupt the boot process and tell it to boot from MMC0. the default boot order is: mmc1 mmc0 nvme scsi usb pxe dhcp spi I've tried a number of things to correct the issue but none worked. In the aliases section of rk3588s-orangepi-5b.dts, I had to device sdchi as MMC0 (it really is MMC1). Not it boots like it should. Is there a better way to get u-boot to boot from SD card first? Thanks!

Board: NanoPC-T4(rk3399) OS: Welcome to ARMBIAN 5.69 stable Ubuntu 18.04.1 LTS 4.4.167-rk3399 In VLC preferences, i have set video output to OPENGL ES(and here OPENGL ES is soft link to libMali.so). In short hardware accelerated Rendering. Problem Statement: When a video file is played in fullscreen mode it works perfect. But as soon as other x-window(for eg: small sized terminal window) comes in front of this fullscreen window, tearing effect starts. Now i don't understand why this happen. Whether it happens due to libMali and X-server Glamor compositing or something else. i don't have full understanding of linux graphics stack. …

Hi, I'm running Armbian Bionic 4.4 (Linux nanopim4 4.4.190-rk3399 #5 SMP Sun Sep 1 23:12:43 CEST 2019 aarch64 aarch64 aarch64 GNU/Linux) on a NanoPI M4 and I'm trying to enable HDCP on the HDMI output. I can't figure out how to do this (or if it is even possible). dmesg shows that the driver/hardware knows about HDCP to some extent pi@nanopim4:~$ dmesg | grep -i hdcp [ 3.307777] dwhdmi-rockchip ff940000.hdmi: Detected HDMI TX controller v2.11a with HDCP (DWC HDMI 2.0 TX PHY) xrandr lists no content_protection property pi@nanopim4:~$ xrandr --prop Screen 0: minimum 320 x 200, current 1920 x 1080, maximum 8192 x 8192 HDMI-1 conne…

Hi, In a bid to solve an issue with my NAS (which I now think was a dying HDD) I foolishly decided to upgrade from buster to bullseye and now most, if not all, of the services are failing to start - including network-manager, sshd and fancontrol so I only have access via the USB serial console. By setting a static IP I have been able to get it network access at least. When I try to start any of the dead services it hangs for a minute or so, then kicks me back to the login and the terminal is corrupted so I need to reboot before I'm able to do anything meaningful. (I am able to start fancontrol by just running `fancontrol` at which point the fans stop going at 100%, s…

Greetings, I can't seem to find any documentation on how to access the only PWM port on the Nano M4 which happens to reside on the 2nd set of pins. It's listed as GPIO2 and the PWM pin is pin 23 which they label as GPIO_C6/PWM1(3V). SInce any documentation I find on GPIO has to do with the 40 pin port, how can I program the PWM using wiringPI-Python? I wonder why Nano chose to disregard the other PWM pins that other Raspberry Pi type boards retained like the Asus Tinkerboard. Or am I missing something? If so, can someone enlighten me as to how to access PWM on the Nano M4.

Hi, I try official Sid image found at https://www.armbian.com/station-m1/ and can't activate bluetooth on my Station M1 : root@station-m1:~# hciconfig hci0: Type: Primary Bus: UART BD Address: 00:00:00:00:00:00 ACL MTU: 0:0 SCO MTU: 0:0 DOWN RX bytes:106 acl:0 sco:0 events:2 errors:0 TX bytes:100 acl:0 sco:0 commands:2 errors:0 root@station-m1:~# hciconfig hci0 up Can't init device hci0: No such file or directory (2) It seems the firmware of rtl8723ds doesn't load : [ 14.182722] Bluetooth: hci0: RTL: examining hci_ver=08 hci_rev=000d lmp_ver=08 lmp_subver=8723 [ 14.193986] Bluetooth: hci0: RTL: rom_version status=0 version…

I have had major problems trying to use spidev on the pine RockPro64 SBC running Armbian_24.2.1_Rockpro64_jammy_current_6.6.16_xfce. I have posted these comments on the pine.org forum also. I think there is a problem with the spidev device in Armbian as it never toggles the CS line. When I controlled the CS line from my software, I could communicate, but the received data was wrong. I have no experience with the device tree, but I suspect an isue therein. To bypass the problem I wrote a bitbang routine and it works fine and gives the correct data. See the attached file for my discussion. usingspi.txt

I see that there is a lot of work ongoing on improving the UEFI boot support for Rock 5B and this is quite exciting. In my view this seem to be the ideal route for future SBC boards. However, I am yet to try it so I am still a novice in the area. How do you guys look at the future of UEFI vs U-boot for Linux on SBC’c in general and on the Rock 5B in particular? Will the UEFI version be as capable as a u-boot version or do you see limitations?

Hello, I have a strange behavior with my nanopi r2s. I got the official armbian (buster) image with Openmediavault and docker along with portainer. I run qBittorrent as a container. When i start a torrent download the r2s crashes sporadically. The issue is observable only when a torrent is being downloaded..The crash happens sometimes almost immediately after boot up when the download process is resumed, but sometimes it can take a whille. Sometimes it is event possible to complete the download. I've got a nice class 10 sandisc 32 gb and a 256 SSD plugged in a usb 3.0 dock with external power supply. The r2s power is also pretty good but tested with different …

Would anyone be able to help me out with instructions for installing armbian to the EMMC of my Rock Pi N10? I've had Ubuntu installed using the OTG tool and also Armbian running off an SD card, but as soon as I run armbian-install and reboot the device doesn't come back up. Not sure what I'm doing wrong or the correct steps to troubleshoot.