Other families

I have a Cubox-i (older 2GB version) running Armbian_5.00_Cubox-i_Debian_jessie_4.4.1.zip. It's using a SATA drive as root. I've installed some services that take up a lot of CPU. After a couple of days, it still responds to pings, but I can no longer log into the box with SSH. I'm forced to power cycle it to log back in. Looking at it, there's nothing in the logs to point to the problem, the only weird thing in /var/log/messages is: Feb 22 12:34:47 localhost rsyslogd-2007: action 'action 17' suspended, next retry is Mon Feb 22 12:36:17 2016 [try http://www.rsyslog.com/e/2007 ] I do wonder if it's overheating due to the CPU use. Is there anything I can do to tra…

Hey All, First, a big thank you to Igor and all who work hard to get armbian out to the masses Second, setting NODM_ENABLED=false NODM_USER=some_user in /etc/default/nodm as per the instructions here: http://www.armbian.com/documentation/ - section 'How to login?' doesn't seem to work for me on my cubox i4pro. I turns out that /etc/default/nodm gets overwritten with the default root values on each boot. This causes lightDM to misbehave and bugger up the Xserver. I see Xcursor drawing artefacts and the LightDM UI widgets poke through into the root autologin desktop. Even without lightDM installed and /etc/default/nodm set as follows: …

Hi, how can I edit the ssh welcome message in my cubox? Thanks.

Hi, I just tried last Debian iso from solidrun where bluetooth is working. It is the only issue I have with my Cubox-i 4x4 working with debian from armbian. But there is always a but..... I can't copy the system to the hard drive and make it work after reboot, only works from sd card. So my point is How can I use the benefits of armbian (it's tools) on another iso where drivers look work fine? thanks.

Hi, When I tried booting the vanilla kernel, downloaded from http://www.armbian.com/hummingboard/, on my Hummingboard i4 Pro, I get the following error message from u-boot: ERROR: Did not find a cmdline Flattened Device Tree Could not find a valid device tree Booting from net Has anyone else seen the same issue? Thanks.

Thought this module was included in the kernel. I can install the iscsi client software, but obviously, no good without the module. Will it be included in the future? Cheers

the system in my cubox-i 4x4 crashes after updating to kernel 4.4.1. I did the update in the system and after rebooting it doesn't work. I upload the screenshot of the only thing I get, after that the screen goes off, nothing else happens. If the problem is the new kernel it means I can't upgrade it, is it right? I also try new images 5.0 Vanilla and I get the same screen.

Hello, I'm trying to get the gstreamer pipeline to work with the i.MX h.264 hardware encoder and decoder. I've installed Trusty Vinilla http://mirror.igorpecovnik.com/Armbian_4.90_Cubox-i_Ubuntu_trusty_4.4.1.zip on a Hummingboard-Gate and followed the instructions for setting up the i.MX Gstreamer plugins here: https://github.com/Freescale/gstreamer-imx/blob/master/docs/debian-ubuntu.md gst-inspect-1.0 reports... $ gst-inspect-1.0 | grep imx imxvpu: imxvpudec: Freescale VPU video decoder imxvpu: imxvpuenc_h263: Freescale VPU h.263 video encoder imxvpu: imxvpuenc_h264: Freescale VPU h.264 video encoder imxvpu: imxvpuenc_mpeg4: Freescale VPU MPEG-4 video encod…

I'm trying to work with bluetooth and the existing 3.14 kernel has known problems. I want to get 3.17 or later. Or can I just build this myself with the config forward from 3.14? Where there any other modifications made?

Just upgraded to the new Jessie image 4.4.1. Is there any concern with this bad CRC warning? Do I need to update the u-boot.img? If so, how. U-Boot SPL 2013.10-rc4 (Feb 03 2016 - 16:37:42) Boot Device: SD1 spl: error reading image u-boot.img, err - -1 Load image from RAW... U-Boot 2013.10-rc4 (Feb 03 2016 - 16:37:42) CPU: Freescale i.MX6Q rev1.5 at 792 MHz Reset cause: POR Board: MX6-CuBox-i DRAM: 2 GiB MMC: FSL_SDHC: 0 *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: FEC [PRIME] Hit any key to stop autoboot: 0 mmc0 is current device ** File not found /boot.scr ** ** File not found /uEnv.txt ** ** File not …

Hello all :-) ! Not sure if I am doing something wrong at all or not. But I've been trying the wheezy image from here. While I can get everything installed ok I've a problem with video acceleration. I've managed to install the packages and have taken note of the changes here to do with installing the packages and kernel for video acceleration. But unless it is something I'm not doing right, performance dosen't exactly seem to be all that great even with acceleration. I noticed that one thing that I could do btw to improve performance just a little was to turn down the colour depth. I did this by doing the following; root@cubox-i:/boot# cat boot.cmd setenv bo…

Hi. I had to force my way through the upgrade script working. I haven't rebooted yet, but I'm crossing my fingers . Here are the three issues: 1. cubox-i shows as "unsupported" and the script dies. /proc/cpuinfo shows: Hardware : Freescale i.MX6 ... ...which isn't in the list in the script. 2. The script crashes and can't handle the situation where the apt-get upgrade prompts you about configuration files. For example, my /etc/bash.bashrc was different than the packaged version. The script won't take input and hangs. I see the "-y" in the script, but for some reason it doesn't seem to work right. 3. /boot/script.bin - a symlink is made to a none…

I would like to run a vanilla/mainline debian kernel on my cubox-i4pro but apparently there is no image available for download. Is that be because the vanilla kernel is not supported or nobody has yet build one?

Hi Igor, I want to compile a new kernel on HB. I do following steps: export ARCH=arm export CROSS_COMPILE=/usr/bin/arm-linux-gnueabihf- make imx_v7_cbi_hb_defconfig make If make is in process, I become an error: /bin/sh: 1: /usr/bin/arm-linux-gnueabihf-ld: not found make[1]: *** [init/mounts.o] Error 127 make: *** [init] Error 2 how can I fix that?

Hey, i'm getting the following error, when i try to login me as root: Authentication token manipulation error This error appears after i insert the first time the new password. I think this is an error in the Debian Image, isn't it ? Best Regards Pingbo

Hi everybody, I'm new here and I would like to ask you for help with make armbian work on other board - Toradex Colibri iMX6DL with freescale iMX6 processor. They already have U-boot & Angstrom linux on NAND (where I would like to get armbian). They have meta-packages and images available for download on their website and I would like to know what is the best way to make it work (to keep their HW configuration)? I like these boards because of good desing and good HW, but this Angstrom linux isn't good... Thank you for every advice

Hi Igor, my Cubox-i4Pro worked perfectly fine with your Armbian Debian Jessie, until I upgraded from 4.7 to 4.81. After the upgrade was performed today, the system time is always wrong after boot, it is always set to Jan 1 01:00:00 1970. Setting the system time correctly does not help, after reboot it is wrong again. I didn't observe this behavior before upgrade, the system time just used to work without any attention needed. Nothing else was changed in the system, only the upgrade of Armbian was done to ver 4.81. So I'm wondering what went wrong with the upgrade. Hardware time is always correct, syncing system time to hardware time does not survive boot. I tried …

Hi Igor ! We have a problem with i.mx6 when ambiant temperature is too high or when CPU is too busy. The CPU frequency don't scaling with the temperature CPU, so the System Crash. Can you had thermal sensor on Cpu scaling ? by add it on kernel ? Thanks

I have debian installed on my hummingboard pro. When I execute nand-sata-install script it looks like it works. It asks me to reboot but then issuing a df -h or mount does not show that I have a 32gb drive mounted on /. Is there something else I have to do after I run this script? Thanks! ril3y

Hi, i am trying start Kodi on CuBox i4Pro but without success for now. - I installed armbian debian jessie on SD. - booted & rebooted - add into sources.list deb http://httpredir.debian.org/debian/jessie-backports main contrib non-free deb-src http://httpredir.debian.org/debian/jessie-backports main contrib non-free - apt-get update - apt-get upgrade - reboot - apt-get install kodi and laund kodi and crash with error ERROR: Unable to create GUI. Exiting Segmentation fault Crash report available at /root/kodi_crashlog-20151229_181607.log What now? Thanks for any hint.

hi... i have some trouble compiling a new image with the latest kernel (4.2) for udoo quad. i get an error during make drivers/pci/access.c:493:16: error: redefinition of 'pci_vpd_f0_write' static ssize_t pci_vpd_f0_write(struct pci_dev *dev, loff_t pos, size_t count, Any idea? solutions?

Hi, I installed latest Jessie desktop version on Cubox i4Pro but audio via HDMI still does not work... Any solution? Thanks

Finally got an UDOO quad Trusty image built. How do I get it out of the virtual environment? Shared folder?

Hi, i'm quite new to Linux and the cubox. I have just installed my cubox 4x4 and downloaded armbian. All works but a can only see 2GB of the 4GB memory

I am running Armbian_4.5_Cubox-i_Ubuntu_trusty_3.14.54 on a CuBox i4 Pro. The application is a security camera server and the current test environment consists of the server and two IP cameras set to 320x240 and running at 5 fps. The server is receiving these two streams over the Ethernet interface constantly but the data rate is pretty low. I am seeing the Ethernet interface fail after 24 to 48 hours with the syslog entries shown below. After the failure I can restart the link with ifdown/ifup and it works fine. Has anyone else seen a similar issue? Oct 29 11:56:09 localhost kernel: [ 0.505433] libphy: fec_enet_mii_bus: probed Oct 29 11:56:09 localhost kerne…

hey, is there anyone who successfully compile armbian kernel with can support for uddo quad board ? (i also preffer compiled iptables module) here is my working patch with yocto project version dora http://pastebin.com/BF2SeWHa

Hi, I installed Armbian on a Cubox 4x4, I realize this was designed for a different board, but in general it works. But I found there was a problem with the system clock, it kept booting up with the time: Thu 01 Jan 2015 10:07:23 AM CET After some investigations, I found that this board has two hardware clocks: /dev/rtc0: Thu 01 Jan 2015 10:05:17 AM CET -0.616496 seconds /dev/rtc1: Fri 13 Nov 2015 08:23:47 AM CET -0.603090 seconds It looks like rtc1 has a battery and survives reboot, but /dev/rtc0 does not. I tried setting the clock using "ntpdate" on boot, but I found that something kept resetting the time. I found it is /etc/rcS.d/S06hwclock.sh …

Hi, I tried to download CLI-ubuntu and Desktop-Debian archives, then i did like described in manual: sudo dd if=Armbian_4.5_Cubox-i_Debian_jessie_3.14.54_desktop.raw of=/dev/rdisk2s1 bs=1048576 or sudo dd if=Armbian_4.5_Cubox-i_Ubuntu_trusty_3.14.54.raw of=/dev/disk2s1 bs=1048576 When i try to use that on my cubox i-pro - nothing happend: TV connected via hdmi and i see only black window I had ubuntu 12 installation on the same sd-card, i have backup of it and i can restore from backup (everything works fine). But how i can use the new one kernel, created here? Ps. sd-card: 4Gb, cubox-i pro, mac os.

Gent's, I try to get a image build the last days, but when the image was created, it fails booting. On some other try's, it didn't build. Has in the last time someone build a image ? And is it booting ? :-) Thanks Peter

I was trying to plug my Arduino uno into my Udoo quad but it does not appear to be assigned to a serial port, which i believe should appear as ttyACM*. when searching the kernel github page i see these relults https://github.com/patrykk/linux-udoo/search?utf8=%E2%9C%93&q=ACM. Is it possible to get these devices supported in your next kernel release?

Hello, I am using clean 2.9 jessie build on Cubox-i. I am planning to move from 1*bare sata HDD boot to 2*sata HDDs with lvm mirroring. Somebody had tried to boot from lvm on such devices? Is it works out-of-box or need some tweak? Thanks, Yuri.

Using Armbian_4.4_Udoo_Debian_jessie_3.14.28 - Wicd doesn't detect any networks (/etc/network/interfaces has wlan0 commented out). If i setup /etc/network/interfaces and edit /etc/hostapd.conf and /etc/init.d/hostapd, I can get the udoo to authenticate to my wireless network, but I can't ping/resolve/browse anything but google.com Using CLI images - I can't get my network card to auth at all. Any idea what happened - a few months ago wifi was working perfectly. Also - is there anyway to modify the startup job to raise network interfaces to have a time limit? Occasionally boot will go indefinitely.

I am using your Debian (jessie) on the new SolidRun Hummingboard-Edge board. [Linux cubox-i 3.14.14-cubox-i #8 SMP Sun Jul 12 19:03:09 CEST 2015 armv7l GNU/Linux] I am planning on using the RS-485 on the board that is tied to UART2. But I noticed that ttymxc0 (UART1) and ttymc3 (UART4) are the only tty ports that have drivers associated with them. [ "dmesg | grep tty" ] How can I turn on the driver that is associated with UART2 (ttymxc1)? Thanks,

Hi There ! Finally managed to Get the Cubox up& running well . Upgraded from Wheezy to Jessie . Still Stock 3.14.14 Kernel. Well, next step: The graphics card/hardware acceleration. Is there a quite straight "Do this,get that, then do that" howto to get it working ? Thanks so far! ###edit### Things are geting quite weirder today. Did a further SD-Card with Cubox-i_Debian_2.6_wheezy_3.14.14 to get GPU-Suppport by the Wheezy releases . corrected sources: deb http://repo.maltegrosse.de/BSP:/Cubox-i/Debian_Wheezy/ ./ deb-src http://repo.maltegrosse.de/BSP:/Cubox-i/Debian_Wheezy/ ./ apt-get update / upgrade Did apt-get install…

Hey all, I have been fighting this for 2 days now thought I would reach out for some help. I have a Intel Wireless 7260 PCIe in my Hummingboard Pro board. I can run iwlist wlan0 scanning and see my wifi access point no problem. However when I run dhcpclient wlan0 I never can connect to my access point. This is my /etc/network/interfaces file. # Wireless adapter #1 auto wlan0 allow-hotplug wlan0 iface wlan0 inet dhcp wpa-ssid "myssid" wpa-psk "mypassword" auto lo iface lo inet loopback I have also tried a USB wifi adapter to attempt to rule out the PCIe bus being the issue. However neither will connect. If anyone knows what to do from here I would be e…

Hi there ! Quite nooby again - about 10 years off from the deb-world - i beg for patience. Actually three issues: 1. Ultrawide Screens : 2560x1080 @60 (LG 25UW) via HDMI. Got it working on Raspbery (Overclock cpu+GPU/ mod of PixelPipe/ Mem of GPU) How to achieve this on Armbian Wheezy od trusty Desktop ? boot.cmd is ignored (already tried to mkimage it to /boot/boot.scr 2. Wlan Performance Wlan performance unter Wheezy was quite Poor , known issue ?? security.debian.org - gpg-errors with repo - that was funny enough to get started with.. 3. Tried Armbian trusty Desktop. Loads. No Desktop.No Start X? How to get rid of this Prob ? (Whats the…

got this message during build (during installation of additional packages: bridge-utils): [ error ] Installation failed initctl: Unable to connect to Upstart: Failed to connect to socket /com/ubuntu/upstart: Connection refused invoke-rc.d: unknown initscript, /etc/init.d/systemd-logind not found. dpkg: error processing package libpam-systemd:armhf (--configure): subprocess installed post-installation script returned error exit status 100 Processing triggers for libc-bin (2.19-0ubuntu6) ... Processing triggers for sgml-base (1.26+nmu4ubuntu1) ... Processing triggers for ureadahead (0.100.0-16) ... Errors were encountered while processing: libpam-systemd:armhf E: Sub-…

Hello Igor, thanks for your work. On your Github-page for Kernel 4.2.0 you say you tested this kernel with chromium egl. Which was your setup? (Did you build your own chromium? which distro did you use?.....) regards Florian

I was trying to install the udoo kernel but got stuck with this error: root@udoo:/tmp/4.0.8# ls -la total 32968 drwxr-xr-x 2 root root 4096 Jul 29 14:21 . drwxrwxrwx 5 root root 4096 Jul 29 14:21 .. -rw-r--r-- 1 root root 16875520 Jul 13 11:30 4.0.8-udoo-next.tar -rw-r--r-- 1 root root 11204 Jul 13 11:30 linux-dtb-4.0.8-udoo_1.8_armhf.db -rw-r--r-- 1 root root 49792 Jul 13 11:30 linux-firmware-image-4.0.8-udoo_b -rw-r--r-- 1 root root 6844194 Jul 13 11:30 linux-headers-4.0.8-udoo_1.8_armb -rw-r--r-- 1 root root 9096354 Jul 13 11:30 linux-image-4.0.8-udoo_1.8_armhfb -rw-r--r-- 1 root root 769836 Jul 13 11:30 linux-libc-dev_1.8_armhf.deb -rw…

With build from 26th of August, kernel 3.14.14 (cli, debian jessie) I cannot see any hdmi output. When cubox i4pro boots, it shows uboot env and I can interrupt boot, hdmi works well. starting kernel puts monitor into powersave mode. everything else seems to work, I can ssh to the cubox and see the logs, which look normally, e.g. I have tried bpp 16 or 24 when default 32 didn't work root@cubox-i:~# egrep 'mxc|hdmi|fb0' /var/log/kern.log Jan 1 01:00:20 localhost kernel: [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rootfstype=ext4 rootwait console=tty1 video=mxcfb0:dev=hdmi,1920x1080M@60,if=RGB24,bpp=16 rd.dm=0 rd.luks=0 rd.lvm=0 raid=noautodetect pci=…

When cubox is configured to run wifi, it takes 60+ seconds for it to start up with no network cable plugged in. Where as when I plug in a network cable to the network port it will start up under 10 seconds. Hardware: Cubox-i4 Pro Running Ubuntu Trusty image found here: http://www.armbian.com/cubox-i/ Any advice would be appreciated.

I'm running the ubuntu trusty image on a Hummingboard-i2eX and am experiencing 2+ minute boot times. The system starts booting and I get the following output before it hangs. [1.6xxxxx] imx-ipuv3 2400000.ipu: WARNING: adapt panel end blank lines [4.2xxxxx] IR keymap rc-rc6-mce not found I am assuming that it is something related to the IR keymap that is holding the system up, but am not certain. Any thoughts on getting a slightly faster boot?

I exposed my cubox to the WAN and some **** has hacked me and changed my root password, how can I reset it? I've tried hitting shift on boot but I don't get a grub menu. I'm using the debian jessie image. Thanks, Jack

Hi, I installed Debian wheezy I tried to connect via ssh with ethernet connection and it works well , but if I try to connect with the wifi connection is blocked after entering the password , it is a bug cubox? . If you can serve the ouptu ssh -vvv it is : marco@kali:~$ ssh -vvv 192.168.x.x OpenSSH_6.0p1 Debian-4+deb7u2, OpenSSL 1.0.1e 11 Feb 2013 debug1: Reading configuration data /etc/ssh/ssh_config debug1: /etc/ssh/ssh_config line 19: Applying options for * debug2: ssh_connect: needpriv 0 debug1: Connecting to 192.168.x.x [192.168.x.x] port 22. debug1: Connection established. debug1: identity file /home/marco/.ssh/id_rsa type -1 debug1: identity file /home/marco/.ssh…

Hello, I use a SolidRun MicroSOM i2eX in combination with the Toshiba TC358743 HDMI to CSI-2 bridge. (http://www.toshiba.com/taec/components/ProdBrief/10L02_TC358743_ProdBrief.pdf) As far as I know, the driver for the Toshiba chip is now included resp. available in kernel 4.1. (https://lwn.net/Articles/643374/ and http://www.spinics.net/lists/linux-media/msg88921.html) Can anyone confirm that? The driver was available for kernel 3.0.35 (https://developer.ridgerun.com/wiki/index.php/Toshiba_TC358743_Linux_driver_for_iMX6) I've created a new image based on the compile.sh script from Igor PeÄovnik (https://github.com/igorpecovnik/lib). Thanks a lot fo…

I've been looking for a way to rotate the display and change the resolution on the Hummingboard running the Debian image I did this from the FAQ: screen resolution: nano /boot/boot.cmd # example: # change example from # disp.screen0_output_mode=1920x1080p60 # to # disp.screen0_output_mode=1280x720p60 mkimage -C none -A arm -T script -d /boot/boot.cmd /boot/boot.scr somewhat blindly and I destroyed the boot.scr, further searching found that /boot/boot.cmd doesn't exist... I've been messing with xorg with no avail. I think that this is the way to do, through the boot.scr, but there…

Hi, If you think that Solid-run Cubox-i kernel branch is becoming outdated, you can use a mainline linux kernel with the following enablement patches: Russell King home dir: http://www.home.arm.linux.org.uk/~rmk/cubox/?C=M;O=D Grab the most recent hummingboard-cubox-i DIFF big patch and patch it into your vanilla 4.1 kernel source dir. Then use a default config appropiate for a Cubox-i / Hummingboard: # make imx_v6_v7_defconfig hope it helps

Hi every one, Im new on this form and this is my first time, when Im working with HummingBoard. On my HummingBoard is connected a little board with HDMI input and is connected with DVD Player. One another HDMI, which is on HummingBoard, is connected with Monitor, where I can see my console. So, my question is, how can I install, that my little board will become a video from DVD Player and streaming it to the HummingBoard, so, that I can see this video on my Monitor. Im using the Debian wheezy image Sorry for my english, hope for fast help

Wheezy: deb http://repo.jm0.eu/BSP:/Cubox-i/Debian_Wheezy/ ./ Repository is online but installations is untested by me.