Rockchip CPU Boxes

During software installation it went dead and now pc is not detecting it. Kindly tell me pins to short in circuit to bring it back to detection

Android/tablet x 7.1.2/1.1.2/2021 Armbian version that works with rockchip on Android 7 Model No.: VT-TABLET-5081G Input rating: DC5V/2A MAX.10W FCC ID: 2AAGE5081GB48

I have an old and weak mxq pro 4k TV box (fake amlogic s905w), rk3228a checked, sv6051p wifi. I recorded the desired version on the micro sd via the multiboot.img adapter and it worked but did not respond to the remote control, I checked the remote for robotics, recorded libre elec and booted from it without multiboot and it even worked on wi-fi and the remote reacted, I replaced the dtb file and booted from the multiube but it no longer worked I thought that dtb was capricious and decided to replace only part of the it_receiver code in dts format and converted it and recorded it via dd on Linux, but this time the eumultool worked but the remote control did not respond ag…

iid Armbian_22.11.0-trunk_Lime-a33_jammy_current_5.15.73.img.xz.asc Armbian_22.11.0-trunk_Lime-a33_jammy_current_5.15.73.img.xz.sha

which pin connected to WIFI_WAKE_HOST and which pin connected to WIFI_REG_ON. wireless-wlan { compatible = "wlan-platdata"; rockchip,grf = <&grf>; wifi_chip_type = "ap3300"; sdio_vref = <1800>; WIFI,host_wake_irq = <&gpio? ? GPIO_ACTIVE_HIGH>; status = "okay"; };

On my TV box X88 pro 10 128 GB (Armbian 24.11.0-trunk.321 6.11.4-edge-rockchip6), the driver does not work when set to led-config 2. After studying, I performed several operations and everything worked. Maybe it will help someone!! In armbian-config, install led-config 2 and wlan-ap6334 next 1. dtc -I dtb -O dts /boot/dtb/rockchip/overlay/rockchip-rk3318-box-led-conf2.dtbo -o /root/rk3318-box-led-conf2.dtso 2. In the /root/rk3318-box-led-conf2.dtso file, edit reg = <0x24> to <0x0> 3. dtc -I dts -O dtb -f /root/rk3318-box-led-conf2.dtso -o /boot/dtb/rockchip/overlay/rockchip-rk3318-box-led-conf2.dtbo Wi-Fi and Bluetooth are wor…

Hi I have an HK1 MAX with RK3218 CPU. I tried to install Armbian with multitool. I erased the flash from multitool flashed Armbian and the board won't boot at all It doesn't boot from an sd card and when I press the reset button is not entering mask mode, it is just stuck with the red light on Is 100% dead or is anything I can do?

Hi, can anyone help me with this TV box? I need to unlock it, but I don't know where to short the cable because the PC won't connect. Rk3228a, zq01-v1.51

Hello everyone, I am trying to install Armbian on my Android TV Box, but unfortunately, I flashed an incorrect firmware. Now the device is hard-bricked: the red and blue LEDs are blinking alternately, there is no HDMI output (black screen), and the physical reset button is not working properly. I already have an SD card loaded with the multitool to install Armbian, but I need to force the SoC into Maskrom Mode first so it can bypass the corrupted eMMC and boot from the SD card. Device Specifications: SoC: Rockchip RK3228A Board ID: T39-V1.0 Storage: eMMC (BGA type) I have attached the front and back photos of my PCB board (IMG-20260607-W…

Hello. I recently got a vontar-dq08 working with armbian. I used someone's build for a x88pro, so I replaced the dtb with the one that came on my board. After editing the ArmbianEnv.txt and resetting, it did not boot. Idk if it's a typo on my end or the tree not working, but to make it boot I would just have to change ArmbianEnv.txt, but taking the sdcard out and plugging it in my computer I can't find the file in /boot How can I revert the ArmbianEnv.txt when my machine doesn't boot?

Hello and greetings to the community, I have already been using the Armbian operating system, almost at the beginning of the year, a good, very stable distribution for this type of boxes, also with very important functions and applications, but I have a query, is it possible to update the kernel in this type of box ?, I am using the kernel inherited from the startup installation (4.4.194-rk322x), if it is possible, how is the procedure? and another query, when I want to restart the system, it does not restart but turns off, either with the option "restart" from the system itself or with the command "reboot from the terminal, in both cases the system turns off and I have t…

Hello, please I want old jammy versions that are compatible with the rk322x

Hi, I am a total newb with a few too many holes in my ozone layer. I have managed to use the Multitool and an image of Armbian from Inovato that runs on their Quadra SBC. I have managed to get my old H96Max to run software called WSJT-X from Joe Taylor and his team at Princeton. I have had a lot of fun and am still having a lot of fun running the H96Max (RK3318) the radio is a small rig called the QDX from QRP Labs. I run it (the computer) off a Powerbank and although it doesn't always boot it is very much a 'less is more' machine for my mind and is grand 99% of the time. I would like to be able to run X11vnc on boot/power up and not have to use ANY machine through a 19" …

Dear Support Team, I am writing to request the original firmware for my Live Broadcast V4 device, which has completely stopped working and does not boot. Upon disassembling the device, I identified the mainboard as: Board model: LIV@3588V4.2 Date code: 20230919 CPU platform: Rockchip RK3588 (or similar variant) Currently, the system is non-functional, showing no signs of successful boot or display. I believe the firmware may be corrupted or missing, and I would like to recover the device if possible. I kindly request the following: A copy of the original firmware image for this device (IMG, update.img, or compatible format) Any…

Hello, i saw your page on the Internet and was wondering whether you could show me where the mask pins are on the HK1 MAX? Sent from my SM-A736B using Tapatalk

Hello. How can I install a desktop environment? I've successfully installed Armbian on a rk322x tv box, but the option to install a desktop environment is missing from armbian-config utility. Thanks!

Hi, I installed the wrong image on a Rockchip RK3288 (Hannspree) Android 5.1 TV box. Now it won't boot from internal memory or sd-card, power on, light up or anything. Like it was hit by lightning. Is this expected? What has happened? (This very comprehensive and helpful post says that "If the internal flash does not contain a bootable system, they will always boot from the sdcard.") Thank you good people (The tag on this post is wrong... I could not find a RK3288 tag)

Hello dudes from italian Far East! I'm just starting to explore the sauvage world of modding as the early step of a noob, than I politely apologize in advance for my questions. I have a little and economic TV box RK322X-based, working (not so fine) with an Android 6 custom ROM. I will try to switch it to Armbian but, at the same time, I'll like to prove it for a while without any change. Is possible (and fine working) burn an USB stick for make it? Is it correctly and extensively explained in the forum and I'm only too lazy to search? Thanks in advance.

Hi, I need help identifying the Maskrom/eMMC short points for an RK3528 TV box. Device: - TV box sold as H20 Pro - SoC confirmed as Rockchip RK3528 - Board marking: M16-R6B-L3-V1.0-260121 - RAM detected in Linux: 963 MiB - eMMC detected in Linux: 7.83 GB / 7.30 GiB - eMMC name from Linux: P1J95K - eMMC CID: fe014e50314a39354b12739109744200 What happened: - The box originally booted Android from eMMC. - Armbian booted successfully from SD using a customized joilg/x88pro-based image. - Later I wrote U-Boot/idbloader to eMMC: - idbloader.img at sector 64 - u-boot.itb at sector 16384 - After reboot, the board no longer boots from S…

I have a RK3228A TV Box which is able to properly boot armbian when flashed to its eMMC (no rknand) . However I don't use Armbian much often, probably a maximum of two to three times a month. I want to keep stock Android on eMMC, for video playback on the YouTube app is much faster compared to in firefox and Android has proper remote support which Armbian lacks. I tried flashing the armbian community image on the sdcard but the device didn't boot from sdcard unless the eMMC was wiped. I found that multitool is able to always boot from sdcard irrespective of whatever is in the emmc. After doing some research on the multitool build process, I think I need a properly co…

try to run kiauh to run klipper i get an error when i try to update system arbian update the repository no longer has a release.also i install python 3 and i get an error that i need to install python3 .i install arbian using this https://users.armbian.com/jock/rk322x/armbian/stable/ and follow this guide https://forum.armbian.com/topic/34923-csc-armbian-for-rk322x-tv-box-boards/ maybe the arbian image i downloaded is very old which one you suggesrt me for my old tv box to install

Hello everyone, I have an old POS machine that uses the Rockchip RK3288 processor. It has a 1920x1080 screen and works fine, but I don’t have any root or bootloader unlock permissions. I would like to flash Armbian on it and make better use of the device. So far I’ve tried: ADB access (only recovery available) Tried using adb reboot bootloader, but the device just powers off Identified some test points like KEY, T3, T2, T52, T51, but not sure which one is for MaskROM shorting Found no physical recovery button, only a reset and power button There might be a UART port, but I’m not sure 👉 Can someone please help me: Identify …

Hallo everyone i really want to filn out how to install armbian onto one of 2 devices i have 2 boxes but ill focus only on one for now. The tvox is a Tangka Cpu = RK3228A Storage chip = SKhynix H9TQ64A8GTMC Wifi chip = s9012p Where could i find the compressed file of the .iso sothat i can flash the firmware onto my tvbox and what software/drivers will i need on windows 10 or ubuntu (preferably win10) id really appreciate if you guys can help me out. I dont have a sdcard only a makeshift working male to male usb adaptor.

Good afternoon. I was implementing an mqtt broker on my rk3228a tv box, and when i try to apt-get install sqlite3, i am greeted with this error: Depois desta operação, 1.769 kB adicionais de espaço em disco serão usados. Ign:1 http://ports.ubuntu.com focal-security/main armhf sqlite3 armhf 3.31.1-4ubuntu0.2 Err:1 http://ports.ubuntu.com focal-security/main armhf sqlite3 armhf 3.31.1-4ubuntu0.2 404 Not Found [IP: 185.125.190.36 80] E: Falhou ao buscar http://ports.ubuntu.com/pool/main/s/sqlite3/sqlite3_3.31.1-4ubuntu0.2_armhf.deb 404 Not Found [IP: 185.125.190.36 80] E: Impossível buscar alguns arquivos, talvez executar apt-get update ou tentar com --fi…

Hello people, I'm trying to compile armbian to run on my TV Box. If I use the image Hinlink ht2 I can boot without problem, but if I try to compile my version of Armbian, the tv box does not boot. I'm using the follow sintax to compile: ./compile.sh build BOARD=hinlink-ht2 BRANCH=legacy BUILD_DESKTOP=yes BUILD_MINIMAL=no DESKTOP_ENVIRONMENT=xfce DESKTOP_ENVIRONMENT_CONFIG_NAME=config_base EXPERT=yes KERNEL_GIT=shallow DEB_COMPRESS=xz I haven't the TTL to debug. What I already tryed: Burn the hinlink ht2 image to SD card and change the ROOT partition to my image (no work) Burn my imag…

Hello, I'm trying to get My Mxq pro 4k Box going. It will start to a screen that say's "android". I think the problem had something to do with a power outage. How can I boot from a Usb thumb drive or Sd card I'v tried just copying a uncompressed copy of multitool and writing a copy with Usbimager am I missing something ? Is there a way to replace the factory image with a whole new on ? Armbian ? Is there a Image with test tool's for these things Media Box's ? Thank you

When i boot on TV box armbian jammy (mis match version on th board). I try to reboot multitool from sd card but not work and i cann't install another version. Time in the screen freeze in yester day. Please told me the command to boot from sd card.

Hello... I have issue with A5x Max+ cant booting into armbian. HDMI output showing boot looping, i was record boot log (log attach on bootom this threads). Device can boot with Android OS inside. i was try several tutorial form this forum: Log - Boot log: https://pastebin.com/Yyskd29B

I have used lots in my time but recently changed to this. I can't get RKMC to access my shared folders because, when I enter the address with back slashes it changes them into forward slashes. With VLC it works perfectly but is unusable without sorting by descending date. Why does it swap the slashes/??? I prefer RKMC to VLC

I have dtb files used by manufacturers for compiling on the Android 5.1 system (OEM versions 2.17 and 2.19). It differs from boards like the firefly, for example: using a 100 Mbps network port, USB GPIO uses <0x50 0x0c 0x00>. Can anyone help with adapting this board? I want to compile it for armbian. 2.17.dtb 2.19.dtb

I have install armbian version 10 on this box. Did watch video for some time, no issues except remote who do not only mine box but satelite receiver also, and this do then crash. I have a new remote who can be adjusted on mucho boxes and dvd, tv enc. but did not manage to let it work on this RT box (mxq pro). Oke I did watch video and encode some in H265, but get not such small files als with H264 in handbrake, I do use hardware encoding with videocard, I need stil to install new computer board with a intel I7 but has not yet the time so I can try the intel hardware encoder who seems to be better... The v…

Hello everyone, I'm trying to locate a specific older Armbian build for an RK3318 TV box and hoping someone in the community might have it archived. I'm looking for: Version: Armbian 22.05.1 (or similar from that era) Kernel: Legacy 4.4.213 Base: Debian Buster Desktop: XFCE (or even a CLI version is fine) The original download link from users.armbian.com/balbes150/ is now a 404. I understand this is a very old "Community Maintained" build and that RK3318 support has moved to newer kernels . I'm specifically seeking this kernel version for a project. If anyone has this image file or a similar legacy build (kernel 4.4.x) for the RK331…

Hello, I do have a X88 and stopped working, only red light, and nothing else. After watching many videos on Youtube, found that there was a semiconductor getting really hot, and there is a short on in/out. I am sure there is a replacement for that, but the problem is that I cannot find the part number or anything. Attached, picture with a circle on that. Anyone have any idea which semiconductor is that ? This is 5 PIN (3+2). Appreciated it.

Hi All new here please forgive if non technical which i am , looking to install armbian into this existing X88 box I have attached photos for experts which one is the correct one to flash,

I Have an A96X with rockchip RK3228 and i tried booting armbian on it, but I got no display on HDMI. I connected a serial adapter to it and here is the information it displays when trying to boot: ▒▒▒▒DDR Version V1.05 20160805_dbg In 300MHz DDR3 Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB mach:2 OUT Boot1 Release Time: 2016-03-15, version: 2.31 ChipType = c 275 No.1 FLASH ID:2c 64 44 4b a9 0 ECC:60 SdmmcInit=0 0 BootCapSize=0 UserCapSize=76f5000 FwPartOffset=2000 , 0 StorageInit ok = 1520008 SecureMode : SBOOT_MODE_NS hdr 0x0:ff a1 0 0 1b 0 0 0 f0 f2 2e 68 f0 f2 2e 68 hdr 0x0:a4 81 0 0 4e 23 0 0 f0 f2 2e 68 f0 f2 2e 68 hdr …

Hello everyone, I'm working with a JR3288lc development board with a Rockchip RK3288 processor and I'm currently facing a Bluetooth detection issue. I'm using the official Debian 9 image provided by the manufacturer, but the system doesn't see the Bluetooth module at all. When I check the dmesg output, I see a specific parsing error related to the power GPIO in the Device Tree. It seems the kernel can't parse the power feature, which is preventing the module from working. How can I fix this? Any help would be greatly appreciated.

Hi, I need help with flashing my tv box or installing it on linux. I would also be happy if you could run an armbian or similar minimal system. I would like to run a website on it at home. I already did it for an old venz v10 for a friend and installed armbian on it and he really liked it, but my couldn't install it with a memory card, the on new box 1. System Information Google Android Tv Box - Android 14 Android Version: 14 (Upside Down Cake) API Level: 34 Android Security Patch Level: 2025-01-01 Rooted Device: No Android ID: 5c4aa62950194797 Build ID: rk3528_box_32-userdebug 14 UTT2.241219.001 eng.hxws.20260124.163421 release-key…

I HAVE AN MXQ PRO 4K 5G TV BOX. RK3229Q-221P-V1.3 AND WIFICHIP: SV6158 PLEASE HELP ME WITH A ROCOVERY.IMG FILE I TRIED NEW ROMS BUT ALL OF THEM HAD NO WIFI..PLEASE HELP

I failed to flash the firmware of my TV box and it's now bricked. I need to re-flash it. Please tell me where the shorting point of this TV box is and how to flash it using the shorting point. Thank you.

Hello everyone! I'm new to the community, so please excuse me if my question seems silly. I'm following the topic template: https://forum.armbian.com/topic/34923-csc-armbian-for-rk322x-tv-box-boards/ My TV box has NAND memory and I'm having trouble downloading an ISO with the legacy kernel (ideal for NAND memory). Could you please help me?

Hello everyone! I'm using this patch set from github to run armbian on x88pro13 (which has RK3528 with Mali 450 MP2). Everything seems to work fine (even wifi), but i'm not able to enable hw acceleration on kodi interface (it shows llvmpipe, so it's sw rendering) Do you have any hints on how to do that? Because at the moment i get 80% cpu just for the kodi gui. Thanks!

Hello everyone, I’m new to this forum and I’m currently trying to restore a device that is not booting properly. The device is stuck with the red and blue indicator lights, and there is no further activity. The device does not seem to boot or respond normally. Could someone please guide me on how to diagnose and restore this device? I would appreciate any information about the correct recovery procedure, boot mode, firmware restoration, or the appropriate tools/software that I should use. I’m still a beginner, so please explain the procedure step by step if possible. Thank you very much for your help and guidance. 🙏

Hi, I have two rk322x TV boxes (RK3229 with SSV6051 SDIO wifi) where wlan0 is created but never comes up on Armbian. Both boxes had working wifi on their original Android firmware. I instrumented the driver to trace this and would appreciate input from anyone familiar with ssv6051. SYSTEM Board rk322x-box (Generic RK322x TV Box, RK3229) Armbian 26.11.0-trunk.25 trixie, BRANCH=current Kernel 6.18.46-current-rockchip Wifi chip SDIO 0x3030:0x3030, "SouthSiliconValleyInc. / Cabrio" Driver ssv6051 (in-tree, from Armbian's wifi-driver-ssv6051.patch) Firmware /lib/firmware/ssv6051-sw.bin and ssv6051-wifi.cfg both present…

I made a replacement case for RK322x boxes. Im not sure it will fit other model https://www.printables.com/model/1799650-slim-case-for-rk322x-rockchip-tv-box