Beginners

Hi Need help! SATA stopped working on the latest Armbian 21.08.3 Bananapipro buster current 5.10 after upgrading from Armbian 20.05.1 Bananapipro buster current 5.4.43. Does anyone know how to get it back?

Опубликовано: только что · Hidden - This content must be approved before it can be edited. HOT NEWS!!! With Armbian Armbian 23.02.2 Jammy with Linux 5.15.93-rockchip64 on (rockpi-4b plus v.1.72) Add (do it elso on all booting fevices = MMC, NVME, MPD, SD) the following lines to /boot/armbianEnv.txt overlays=spi-jedec-nor param_spinor_spi_bus=1 Reboot If you shorted 23-25 pins in 1.) then: disconnect them after the ROCK Pi 4 fully boot's enable spi-nor by executing (as root): echo spi1.0 > /sys/bus/spi/drivers/spi-nor/bind verify that the SPI mtd interface is enabled by running ls /dev/mtdblock0 if the last comman…

Hi, I have problem installing the program. It always stops on the message: "Setting up shared-mime-info (1.5-2ubuntu0.1)" I try reinstalling system, format micro sd card etc...still same error...

Hi, I'm trying to download the image to add to my sd card, but all the images I tried downloading, either through direct link or torrent, give me this error: Internal error - code should not reach this point I couldn't find any information about this anywhere, and it is happening with all the images and versions. Can someone please help me download them? Thanks!

I am currently working on a Development Board based on RK3288. We are using Rockchip kernel as mentioned here https://github.com/rockchip-linux/kernel This uses libdrm (DRI) for its rendering purposes. But it has limitations. Only one CRTC is connected out of 2. It provides 8 planes, out of which only 4 are available for the working CRTC, out of which user available OVERLAY planes are only 2, and out of which only 1 Plane supports NV12 rendering. I need to show 2-4 videos simultaneously, can anyone help me here on how to procure more planes, particularly NV12 compatible OVERLAY type, that can be connected to the working CRTC?

Hello, I'm new to the subject but I have a problem. I have an Orange Pi 3 and i want to install a linux based system on it to mess around with it. I tried to install armbian but with the nand-install-sata script I can't install it on my eMMC memory, since armbian doesn't see i have one. The only thing it offers me is to update the bootloader on the SD card. So i went to /dev/ and my eMMC memory isn't shown there. I just have mmcblk1 witch is my SD card and mmcblk0p1 wich is my armbian partition on the SD card and nothing else. I figured this was due to the fact that maybe this version of armbian didn't support emmc memory, so I tried with the foca…

Hi, I add a custom repository in customize-image.sh by echoing it in /etc/apt/sources.list.d/custom.list and then calling apt-get update when i build i get always the following error: [💲|🔨] Ign:1 http://apt.customrepo.com bookworm InRelease [💲|🔨] Ign:2 http://security.debian.org bookworm-security InRelease [💲|🔨] Ign:3 http://deb.debian.org/debian bookworm InRelease [💲|🔨] Ign:4 http://deb.debian.org/debian bookworm-updates InRelease [💲|🔨] Ign:5 http://deb.debian.org/debian bookworm-backports InRelease [💲|🔨] Ign:1 http://apt.customrepo.com bookworm InRelease [💲|🔨] Ign:2 http://security.debian.org bookworm-security InRele…

in using minimal armbian with network configuration through dhcpd, ifupdown, wpa_supplicant systemd-networkd-wait-online failing to start during boot causing long boot time. systemctl restart systemd-networkd-wait-online.service causing an error Job for systemd-networkd-wait-online.service failed because the control process exited with error code. See "systemctl status systemd-networkd-wait-online.service" and "journalctl -xeu systemd-networkd-wait-online.service" for details. Sep 10 22:48:17 orangepi5pro systemd-networkd-wait-online[457]: Timeout occurred while waiting for network connectivity. Sep 10 22:48:17 orangepi5pro systemd[1]: systemd-netw…

I just downloaded the Armbian_community_26.11.0-trunk.52_Orangepi5-max_resolute_vendor_6.1.172_gnome_desktop.img (from here: https://armbian.com/boards/orangepi5-max) and flashed it to an SD card. I put the card in the device and booted it but when it comes up, it dumps me at a root bash prompt (auto login) and nothing else happens. I had previously downloaded the Armbian_community_26.11.0-trunk.52_Orangepi5-max_resolute_edge_7.2.6_gnome_desktop.img file and flashed it to an SD card, when it came up it ran a provisioning script allowing me to add my timezone, user definition, etc. Shouldn't this execute on all images the same way? Is there some way…

I have a allwinner A64 tablet, with Android 8, magisk root and bootloader unlocked. I need help to install or run Linux on it, but I have no idea how to get started or if it's even possible to do that.

Both focal and bulleye can startup on cubieboard1 but without network. screen log shows: sun4i-emac 1c0b000.ethernet eth0: could not find the PHY sun4i-emac 1c0b000.ethernet eth0: cannot probe MDIO bus ifconfig show only "lo" and no "eth0" The network on USB-ethernet adapter is working. And I'm sure the onboard eth hardware is OK, because it works on the old system (wheezy and jessie) . Is it a driver issue? Any help is appreciated. Thanks!

Hi, I am trying to determine whether this is expected behavior or a bug/ordering issue in Armbian's armbian-ramlog. My /etc/systemd/journald.conf contains: Storage=persistent SystemMaxUse=20M Persistent journal storage is available: /var/log/journal -> /var/log.hdd/journal and /var/log.hdd is mounted read-write. However, after every reboot, systemd-journald initially writes to /run/log/journal. I verified this directly: sudo ls -l /proc/$(pidof systemd-journald)/fd | grep journal Immediately after boot I get: 33 -> /run/log/journal/d1d6e2a49fd24499b90cb6d5198cb70e/system.j…

I have a small C program where a GPIO pin on Orange Pi is polled using digitalRead. It works fine and detects HIGH and LOW as expected. When I put a dupont wire with nothing connected at the other end (ie. just extend the GPIO pin) digitalRead starts registering intermittent HIGHs and LOWs wildly. What the heck am I seeing? I have a Raspberry 3 nearby and it does not show this phenomenom. Using digitalWrite on the pin works as expected.

Does anybody ever get a solution for that problem? In VT trying to mark something via pointer this is not possible while editing in vim So I do "systemctl restart gpm" and pointer can mark text ........ BUT! vim switches to "-- VISUAL --' and cannot be used any longer! With arrow-keys one can go arround but all text is goin to be marked. You have to press the escape key for quite a long time. This is XAB extraordinary annoying behavior I don't know if debian people are not willing to repair that or don's know how to do that. I did make several reports but just get stupid answers. Sorry for wanting to use: console AND vim…

I've been seeing tutorial on how to setup ili9341 tft lcd and all of them are post from 2017 or older... tried doing it on newer version but I think ili9341 are not supported out of the box anymore by armbian

I have a orange pi plus 2e The time was ok a few days ago but now it is off by - 12 hrs +53 minutes which is before gmt thanks for your help Dave Do I need to open a port in the router?

NanoPi M4B doesn't have dedicated page and image. But hardware is very closed to "NanoPi M4" (same CPU & RAM) Do you know if I could use NanoPi M4 version on M4B? I'm willing to buy a NanoPi M4B but I want to be sure armbian will be compatible

Cubietruck-like board. Omnima A20 micro PC Image for Cubietruck, Ethernet connection does not work, but spdif optical works. Ethernet connection does not work solution in the topic "No IP address for Ethernet connection (Cubietruck-like board)" Image for Cubieboard2, Ethernet connection works, but then spdif optical does not work, only analog audio. I need an Ethernet connection and spdif optical, how can I enable it in the Cubieboard2 image? Thanks!

With the latest version of Armbian I am no longer able to edit the IP from Armbian-config, is it possible to have instructions to set the static IP?

Hello. I'm the one who is the owner of Banana Pi M3... Vendor provides "not so good" OS images... And I want to use best available kernel with the best available linux distr. So, my first question is about kernel version. Can armbian run under 3.4.39 kernel? https://github.com/BPI-SINOVOIP/BPI-M3-bsp To make build reproducible I need to fork this repo and made modifications of the file tree. As I know, Banana Pi M3 now can boot under mainline uboot. Also, there are some binary blobs to support GPU on this board, and I want to try those packages to get hardware acceleration. Sent from my LG-H870DS using Tapatalk

Hi everyone, I'm just a beginner with Armbian and OrangePi. I have some questions, please help me if you have time: Orange Pi PC Plus has serial PIN J3 and GPIO Serial PIN -> What is the difference between them? J3 is maybe debug serial ? I'm trying to write a python example to communicate between PC and board. I have also DB9 module and USB TTL but the problem is that I don't know from where should i start. thank you everyone , I'm waiting for your answer. have a good day

Is anyone prepared to sell me a 16Gb micro SD card preloaded with Raspbian O/S for Banana Pi BPi-M2 Berry board. I have been trying for some weeks now to install this O/S but I just can't get Phoenix Card to work. I have had lots of advice but none of it works. Can anyone help. Regards, robjim418@gmail.com

I am going to have to type a lot of words which I have no idea what they mean.... but here goes. I have bought an Orange Pi 4 LTS and the official touchscreen which goes with it. This connects via a flat ribbon cable into what is called port LCD1. I believe it is MIPI - although have no idea what that means. The screen works perfectly, but is in portrait. I can rotate the screen to landscape with randr or in the gui, but the touch doesn't rotate with it. I tried using xinput (which wasn't installed) and xinput calibrate as well, but neither did anything. I believe that the screen was installed by adding a line in a file cal…

I used to come here some time ago and the first i always visited was the overview of supported boards. It included a photo of the board and the supported and unsupported features. Now i surfed and searched for almost an hour and can't find this or a similar page anymore. Where is that page gone? And i thought i was smart to first check out what boards are well supported before buying one. I saw this new Orange Pi "Orange Pi Zero 2W 4GB RAM + Expansion Board Development Board Allwinner H618 WiFi-BT Orange Pi Zero 2 W Single Board Computer" featuring two USB-C ports. Does anybody know whether that supports Armbian and OTG for a UVC camera and a USB-C Power supply? I do not …

Hi everyone Board: Odroid HC1 Tried to install Sonarr using armbian-config(softly) and it worked just fine, tried the same with radarr and got the following error during installation: tar: This does not look like a tar archive gzip: stdin: unexpected end of file tar: Child returned status 1 tar: Error is not recoverable: exiting now. Looks like an issue with the package not beeing downloaded correctly. Any Ideas?

I'm working on a ElPotato running Ubuntu Bionic 18. I have a test suite that test the kernel's random number generators. The test program comes from the Crypto++ library (https://cryptopp.com/). The test suite is failing its test of /dev/random. It appears the generator is suffering entropy depletion: $ ./cryptest.exe v ... Testing operating system provided blocking random number generator... FAILED: it took 91 seconds to generate 7 bytes passed: 7 generated bytes compressed to 9 bytes by DEFLATE passed: GenerateWord32 and Crop The kernel algorithm to keep the generators in good working order has some gaps. Additionally, the kernel removed several entr…

For reason I can't explain here , I had to run a video player at Non-X window OS ( Armbian_5.96_Aml-g12_Ubuntu_bionic_default_5.3.0_server ) at a S905X tv-box. I tried to play a mp4 video ( H.264 + AAC ) at the video player ( mpv ) with drm driver. The quality is just so so. Is there any other driver recommended ? Did Amlogic provide a linux video driver which can hard-decode h.264 ？ Regards !

Hi use a Nano Pi Neo with the Debian Server Image and and want to try install Pi-Hole but while the Installation Process i get a Error. The Script cant add a Password to the New User that Pi-Hole require (Yes i am use Root) i get a Stunnel4 error ?!?! แทงบอลสเต็ป2 Any suggestion would be appreciated. Thanks.

A month or two back, when I installed Armbian, I had to revert to an older kernel, 5.10.63-rockchip64, which has known vulnerabilities. I needed to be able to boot off of a USB 3 HDD, so I had to revert it and hold updates for the kernel/kernel headers. These are the commands I used to revert to the older kernel: sudo apt install linux-dtb-current-rockchip64=21.08.2 linux-image-current-rockchip64=21.08.2 sudo apt-mark hold linux-dtb-current-rockchip64 linux-image-current-rockchip64 Fast forward to today, where the issue with USB 3 has been apparently resolved in the latest kernel, I tried to unhold the kernel/kernel header updates, that seemed to work. …

on orange_pi pc plus i run nand-sata-install and after progress is 100% i see this error cp: error writing '/mnt/nand-sata-install.Qdjq7T/bootfs/boot/initrd.img-5.15.74-sunxi': No space left on device cp: error writing '/mnt/nand-sata-install.Qdjq7T/bootfs/boot/armbianEnv.txt': No space left on device cp: error writing '/mnt/nand-sata-install.Qdjq7T/bootfs/boot/armbianEnv.txt~': No space left on device cp: error writing '/mnt/nand-sata-install.Qdjq7T/bootfs/boot/boot.bmp': No space left on device cp: error writing '/mnt/nand-sata-install.Qdjq7T/bootfs/boot/boot.cmd': No space left on device cp: error writing '/mnt/nand-sata-install.Qdjq7T/bootfs/bo…

Hello everyone Friends, maybe someone will give clear instructions on how to download armbian from an external ssd on the khadas vim2 board? Now I have armbian installed in emc and ubuntu images created by the developer khadas are loaded without problems. But I can't get armbian to work with ssd in any way. I will be grateful for any help!

Hi Guys, I'm new on Armbian but not on Linux in general. I was pleased to see an up-to-date armbian release for my nanopi-r4s with a kernel greater than 6.x ! 🤗 For my first day, it's pretty good and I can find most of the things I was looking for (even ripgrep). But, I have a look at the services and I've found that haveged is still set. For what I know, since 5.18 version, "Linus" changed his mind for entropy (see https://www.phoronix.com/news/Linux-5.18-RNG). You can have a look at /proc/sys/kernel/random/entropy_avail which is always set to 256 now. Thanks again and best regards !

Hi, Just something I have found, not sure if this is an 'issue' but it definitely caught me out and took a while to figure out and fix. I have several armbian machines (Odroid C2, BananaPi Pro) all running Jessie or Stretch and all working fine. A recent project of mine (using Armbian on a BPi Pro) was to build a Pi-Hole DNS. Some time after doing that I noticed that none of the Armbian machines would successfully run 'apt update' whilst other unix machines including a RPi running raspbian were all fine. DNS config was fine, I could see requests hit the Pi-Hole and be answered. nslookup / dig on the armbian machines all worked fine b…

EDIT: SOLVED, I think. I installed gdm3 then performed a full firmware upgrade from armbian-config. Performed a reboot and now I have an X desktop over RDP. It's working. I wonder if I cheated and lightdm is still broken and using gdm3 is simply a cheats way out. Why would lightdm not work would still be interesting investigating. I do not know if this is a bug or something I've done, but I can not get the xfce4 desktop environment running over the RDP and was wondering . . . 1) Does someone know how to diagnose this problem and fix it? ... OR ... 2) How do I rip out the problem software and all other files so I can try an…

I have downloaded the cli image file and imaged it to a SD card. However, when I attempt to boot, I never get a screen. I tested the board using the NanoPi-R6 image file and do get the initial setup for Armbian. However, it does not recognize USB devices. I realize that the image for NanoPC-T6 is a work-in-progress, but I don't understand why it doesn't boot. Am I doing something wrong?

Dear Sir/Madam, We integrate IR remote with Orange pi lite using Armbian bionic( which apk is available in Orange pi lite website) , we followed the steps which is mentioned in the below link. http://codelectron.com/how-to-setup-infrared-remote-control-in-orange-pi-zero-using-lircd-and-python/ After recording the buttons , if we press the IR remote, we get the wrong output as which we attached. Please check and give the solution.

Anyone have success with GStreamer and Xenial Desktop? Once upon a time (mid 2015) gstreamer used to work like this: gst-launch-1.0 filesrc location=vid.mp4 ! qtdemux ! vaapidecode ! vaapisink Time has passed and the many parts that make up GStreamer (libva libcedrus vdpau-sunxi libvdpau gstreamer and gstreamer-vaapi) have evolved. I revisited this because I have recently stumbled upon an invocation that let's me play videos with hardware acceleration in gstreamer. I'm trying to stream h264 vid from my rpi-zero's camera to be saved/played/restreamed from my BPi ( i have both BananaPi and OrangePi+2e). This wor…

Hello, Did a fresh armbian install on odroid HC2 board/ updated etc...Im getting this in my syslog. It looks its complaining about ntpd. (Unexpected origin timestamp 0xdf6c1697.9f8452c6 and Unexpected origin timestamp 0xdf6c1697.9f8452c6 Is this a know issue or something that could be ignored? Thanks, Oct 13 09:01:03 localhost ntpd[1115]: receive: Unexpected origin timestamp 0xdf6c1697.9f8452c6 does not match aorg 0000000000.00000000 from server@193.2.120.3 xmt 0xdf6c16af.0ea2342a Oct 13 09:01:03 localhost systemd[1]: Time has been changed Oct 13 09:01:03 localhost ntpd[1115]: receive: Unexpected origin timesta…

I use Neo4 for media streaming using plex or minidlna. At first I don't know the problem but the movies played from it is lagging. My previous banana pi is better than this. I thought it is because of heating problem and normal for about an hour after shutdown for several hours. I also thought that may be it is my usb 3.0 hardrive adapter or maybe unstable minidlna. iperf result look normal with speed around 950mbps. This internal wifi is not detected but not a problem because I will not using it. I already tried using FriendlyCore, armbian ubuntu and then armbian debian. After using armbian debian, it starting to show its problem when the other os variant …

Hello dear all, I am currently using Armbian 22.05 Jammy. I am wondering how I can use Python IDE such as Pycharm etc. If you have any suggestions, you are very welcome to comment below. Have a great day.

Hi, I would like to start a new project based on the RK3036 (such as Anycast) with some enhancements. What do I need to do in order to get the firmware? Is there open source the get the source code? Do I need to pay royalties? Thanks, Yehuda

Hello I am using cubieboard 1. I have 3 problems 1) How to format sd card and auto mount when the cubieboard starts? 2) How to store mariadb database and www folder in sd card? I dont have enough space in nand. i want mariadb stores database in sd card 3) How to configure freedns afraid?

i want instal peerflix on Armbian_5.41_Orangepiwin_Ubuntu_xenial_default_3.10.107_desktop, i've install first nodejs from synapsis and after install nodejs -v -> 4.2.6 i run npm -y install peerflix and if return the error message : peerflix --help /usr/local/lib/node_modules/peerflix/node_modules/parse-torrent/index.js:257 ;(function () { Buffer.alloc(0) })() ^ TypeError: Buffer.alloc is not a function at /usr/local/lib/node_modules/peerflix/node_modules/parse-torrent/index.js:257:24 at Object.<anonymous> (/usr/local/lib/node_modules/peerflix/node_modules/parse-torrent/index.js:257:35) at Module._compile…

Hi, I have a Pine 64. Latest stable kernel works fine, but after update to kernel > 5.0 I don't have network. dmesg shows the next lines: Could not attach to PHY stamac_open: Cannot attach to PHY (error -19) Tried a 100 mbit switch, even that isn't a solution. Strange thing is it has worked once a month ago. Power for the board is supplied by the Euler bus. Update: update to the latest kernel (5.1.3) and now I see in in dmesg: Unsupported interface mode: rgmii-txid. Tried this solution: but it doesn't work. Thanks, Rene

Hello All, I installed Sonarr and found it had trouble reading from my nfs mounts, only seeing one folder, which turned out to be mono's issue. I used a snapshot of version 5.20 from the raspbian repo apt install apt-transport-https dirmngr gnupg ca-certificates apt-key adv --keyserver hkp://keyserver.ubuntu.com:80 --recv-keys 3FA7E0328081BFF6A14DA29AA6A19B38D3D831EF echo "deb https://download.mono-project.com/repo/debian stable-raspbianstretch/snapshots/5.20 main" | sudo tee /etc/apt/sources.list.d/mono-official-stable.list This is working fairly well for me so far and I will post back if I run into problems. Using 5.20 to avoid some of the regression and t…

Hi,o My old laptop doesn't have wifi lan card. So, i wont setup Orange Pi Zero as extend wifi lan card, or wifi bridge? wirlesss to wired ethernet How to ????????????????

On a NanoPi Neo Air I would like to force a USB-connected SDcard reader (which natively uses 4-Bit transfer) to only use 1Bit mode. Any ideas how to configure the driver / device tree to do that?

I tried to create encrypted home folders on my NanoPi R4S but for some reason the password prompt does not show up in serial console. It just times out and therefore fails. I assume that the prompt is not properly pointed to the serial console but the board's console is clearly set to serial. Tried to simply connect an USB keyboard and when the boot at the serial console pauses to enter the password this way but no idea if it has been recognized because it made no difference. Keyboard itself worked though, system rebooted on CTRL+ALT+DEL. Tried a few things like making the code { font-family: Consolas,"courier new"; color: crimson; backgr…

The page at https://docs.armbian.com/Process_Release-Model/ has a link entitled "Release Testing", but the link doesn't seem to go anywhere. Is there a document on the release testing process?

Hi to all! I am using Orange PC Plus and wanted to connect small display to it. I wanted to have display as ready device : in casing, with power etc. So I bought this one Aliexpress link It has HDMI, VGA and A/V input and for 35-45 USD only. Resolution (described) - 1024*600/800*480 Works with Raspberry Pi3 OK! But I need linux board with built-in eMMC memory. So I bought Orange PC plus. But it does not cooperate with this display in any modes, avaliable in h3disp (including 800*480). Also it doesnt work via my HDMI to VGA converter and A/V input is not compatible too. May be somebody have some experi…

Hello, please how can I detect if OS runs from microSD or from on board emmc? Anything like python, sh or command line command would be helpful. Many thanks.

Hello all! =) Can you help me? How can i get video acceleration in Armbian 5.9 (4.20.2-sunxi64) ? I want to use RetroArch for retrogaming and Kodi for media. By default this is slowmotion.. I know I have to install drivers for graphics acceleration. Mali,Drm and something else? Is there a list of drivers that need to be installed for acceleration? And instructions to them Thank you advance!

I could set up the `armbian/build` repository to compile the kernel for my board. I would like to compile an out-of-tree kernel module on the host machine and copy it to the target machine. I understand that my target machine (Nano Pi Neo Air) has enough resource to compile the module but I just want to try this out. I built the kernel with the following command: ./compile.sh BOARD=nanopiair BRANCH=current KERNEL_CONFIGURE=prebuilt KERNEL_ONLY=yes CLEAN_LEVEL="" KERNEL_CONFIGURE=no CLEAN_LEVEL= KERNEL_KEEP_CONFIG=yes BUILD_MINIMAL=yes BUILD_DESKTOP=no EXTERNAL=no The problem I encountered was that the kernel source (~/build/cache/sources/linux-mainline/orange-pi-5.1…

I'm trying to use an Orange Pi Pc Plus v1.1. The disk images for it provided by Orange Pi are worth nothing, having repositories that do not work. As an alternative I've been looking at Armbian, and decided to try the images supplied here: https://www.armbian.com/orange-pi-pc-plus/ . I had a problem with both: -The Ubuntu image always reboot as soon as the gui loads. I don't think it power related, since I'm using a 3A power supply and that's more than what is recommended. -The Debian image doesn't allow me to connect to the internet. I don't have the option to use a cable and the WiFi network I have access to uses PEAP, and I found no way to configure …

I bought that DAC to my OPi - I tought it will be easier. I've configure PCM and TWI in FEX file (IIS works perfect on oscilloscope). Also I've made mods on DAC's board - Raspberry has PCM at other pins. But SPDIF still not working. I suppose, that WM8804 is in software mode, so I have to config it via IIC. My 3.4.113 Armbian doesn't have driver for that DAC. What can I do?

I'm trying Monitor Mode under an orangePi pc plus which use the RTL8189FTV chip, And under armbian, After I config it as Monitor Mode, it crash with segment fault root@orangepipcplus:~# iwconfig wlan0 mode monitor Message from syslogd@localhost at Nov 6 03:13:37 ... kernel:[63339.624651] Internal error: Oops: 5 [#1] SMP THUMB2 Message from syslogd@localhost at Nov 6 03:13:37 ... kernel:[63339.740200] Process iwconfig (pid: 9670, stack limit = 0xed9a4210) Message from syslogd@localhost at Nov 6 03:13:37 ... kernel:[63339.746393] Stack: (0xed9a5d6c to 0xed9a6000) Message from syslogd@localhost at Nov 6 03:13:37 ... kernel:[63339.750768] 5d60: …

hi, I've got a strange Bug with apache2 webdav. Everything works. Read Files, Write Files change Names But i cant delete Files. If i move the File into a Folder i can delete it with the Folder. But i cant delete the File it self. Any Ideas what the Problem is. It cannot be the client i think because it works with other webdav folders. Spoiler cat apache2.conf # This is the main Apache server configuration file. It contains the # configuration directives that give the server its instructions. # See http://httpd.apache.org/docs/2.4/ for detailed information about # the directives and /usr/share/doc/apache2/README.Debian about Debian specific # …

I'm trying to compile Qt5 on my system, following this guide, got the "E: You must put some 'source' URIs in your sources.list" message. After some Google, I know you have to enable "Source code" in software-properties-gtk to use "apt build-dep", but I can't check the source code options in there. ps. armbianmonitor -u didn't gave me a URL, it detected some sort of networking problem.

Armbian Monitor http://ix.io/3qFr Im using Orange Pi Zero with Armbian Buster and have ir-keytable installed. The problem I'm facing is the the kernel is repeating the keycodes too fast. See this useful link , half way down section 2 https://www.sigmdel.ca/michel/ha/opi/ir_03_en.html#ir_keytable My remote control is using rc5 protocol and I have set delay and repeat delay with ir-keytable: sudo ir-keytable -D 500 -P 500 -d /dev/input/event0 Testing with evtest (event 0 on the Orange Pi 0) displays key events in the consol, and ignores delays set by ir-keytable, keys are repeated abo…

Hello. I am wondering if anyone here has Xenomai working for Amlogic platforms? I'm particularly interested in applying Xenomai to Le Potato/Sweat Potato. According to them, Xenomai is current and working for the Amlogic S905X3 (Odroid C4), though I have failed to find any source, patches, or images for that board. As far as I can tell, aside from some minor performance improvements here and there, the Odroid C4's SoC layout is very comparable to what the Potato boards have. So I only expect minor changes, if anything, to go from that SoC to the Potato's SoC. Xenomai's own guide to porting the dovetail interface is pretty good; I'll do that if I have too. I…

Seems like network namespaces doesn't work in Armbian 3.4 kernel. Armbian 4.13 works fine. Is it possible to fix it? How to reproduce: ip netns add test ip netns exec test ip a Armbian 3.4 shows all interfaces (it's wrong) Armbian 4.13 shows only 1 interface (lo, it's ok)

I have been using the Pine64 2Gb computer as an automation server for a couple of years now. Purchased it when first available. A bit long in the tooth wanted to upgrade these days to something smaller and faster. Meanwhile here have changed power supply to using the Euler pins and put heatsinks on the device chips. Looking to overclock this device and have not been able to. Welcome to ARMBIAN 5.76.190310 nightly Ubuntu 18.04.2 LTS 4.19.25-sunxi64 pine64:~# uname -a Linux pine64 4.19.25-sunxi64 #5.77.190324 SMP Sun Mar 24 20:09:19 CET 2019 aarch64 aarch64 aarch64 GNU/Linux Well can I ove…

I have this board from Android advertising dashboard and want to install Armbian inside this device anyone knows howto? which image to choose from?

Contemplating whether or not I should pull the trigger and buy a new camera. Images were taken with an OV5640 camera attached to an orange pi PC. The first image is a good image, then after a few hours of use I start getting issues; reading images either times out and/or results in corrupted images. (Note: All images were rotated 90 degrees clockwise) https://imgur.com/a/LEyl1h9

Hello, I've been using the Banana Pi M2 Ultra for 2 years now as a mini 24/7 server with NAS and wireguard functionality etc. I started with a Crucial MX500 1TB SSD connected with the SATA interface and formatted as ext4, but not as OS partition, just for data. A few months ago the ssd occasionally disappeared and I had to restart / poweroff the device and after a restart everything was OK. But not the last time - after mounting the ssd I was shown an blank, empty ssd with no files. Testdisk shows all folders from the "root" folder of the partition, but nothing else, extundelete could also no help. So first question is: How can…

Hi, I just start using armbain after login I saw this error date: invalid date '</body>\r' per attach image. What cause this error ? I have look into motd configuration this error not coming from there. Another monitor package that was installed is rpimonitor. It's look like a some kind of script that run after login.

hi all . it is easy wired-wired bridge . for example , next script x=` ifconfig | grep 192.168 | cut -d ':' -f 2 | cut -d " " -f 1` brctl addbr br0 brctl addif br0 eth0 brctl addif br0 eth1 ifconfig br0 $x netmask 255.255.255.0 broadcast 192.168.100.255 up ifconfig eth0 0.0.0.0 up ifconfig eth1 0.0.0.0 up route add default gw 192.168.100.254 br0 the information of wireless bridge itself is at https://wiki.debian.org/BridgeNetworkConnections#Bridging_with_a_wireless_NIC . but this is difficult for me . i want to make following bridge . wifi router 192,168,100.254 .....wireless.....wlan0:[orange pi]:eth0---cross cable---TV so TV looks at internet .…

Hi, I'm using an Odroid C2 with 8 DVB-C/T (6x TechnoTrend TT-TVStick CT2-4400 and 2xTECHNOTREND TT-connect CT2-4650). Those DVB-C are connected via 2x 4 ports USB 3.0 which are connected in USB C2 ports. The problem is that if I'm using 4 or maximum 5 DVB-C, Odroid C2 has a CPU usage about 30-40% from 400%, so pretty low usage. Now the issues are starting: if I'm trying to start another DVB-C or if I'm doing for example something which uses high CPU suddenly Odroid C2 is rebooting. This is the first thing. The second thing is that the DVB_SKY_2 seems to crash when the mumudvb is starting on a DVB device. The third issue is that I can't change …

It would be super handy whilst also preconfiguring network / users / timezone ... that hostanem was in there also

Hello I`m install armbian 5.60 on my Orange Pi WinPlus and next VNS server and connect from Windows use the VNC Viever but the desktop is missing I see just this screen Not sure but meyb I instal the server version How I can check this and if it`s it`s possible to update for desktop version My SD card have only 2GB . Regards

Hi all, I'm trying to RDP into Armbian from a Windows box and whilst I can connect I only see a blank desktop - any ideas ?

Hello, Today I found that the "serial-getty@ttyS0.service" service restarts every minute. It says "serial-getty@ttyS0.service: Succeeded." in the syslog/journal and then starts again, so it exited with code 0. The restart counter is already at 3085, so it's been like that for 2 days. No output is logged from the service itself. So I looked up its start command and ran it interactively. Again, with no output, after a minute, it returned with code 0. So I straced that thing and saw that it did lots of things, then print "Password:" somewhere, wait a while and then print "Login timed out after 60 second" and exit with code 0. strace /sbin/a…

Hello. I'm running "Armbian 20.11.6 Focal" on an Odroid-C2 board. Today, after an "apt-get update" and "apt-get upgrade", the OS name changed from "Armbian 20.11.6 Focal" to "Ubuntu 20.04.2 LTS". The changes has been done from the package "11ubuntu5.3" (https://launchpadlibrarian.net/519827877/base-files_11ubuntu5.2_11ubuntu5.3.diff.gz) on the files "/etc/issue" and "/etc/issue.net". Well, is that a problem under an "Armbian" point of view? Should I replace "Ubuntu 20.04.2 LTS" with "Armbian 20.11.6 Focal" on the files "/etc/issue" and "/etc/issue.net"? Thanks.

Everyone loves Etcher, but they all have x86 hw ... https://github.com/resin-io/etcher/issues/1688 https://github.com/resin-io/etcher/issues/1993 Anyone have Etcher running on arm?

Minor tweak. I don't have gethostname() (Actually I think that's a C function, not an executable.) Anyway my Rock64 didn't show up my wifi network by name. In /etc/dhcp/dhclient.conf I changed: #send host-name = gethostname(); send host-name = $HOSTNAME; Now it works. And $HOSTNAME is just whatever's in /etc/hostname so you may need to change it if you've got 2 or more machines of the same kind. I mostly lug around a cell phone and I can ftp or ssh to rock64 from anywhere in the house.

Hi. This video (Raspberry Pi 4 RAM Upgrade - Tutorial) is about upgrading Pi RAM from 1GB to 8GB, and it is inspired me to investigate possibility to do this for other boards. If anyone has any ideas and knowledge, please share it with us. I personally interested in NanoPi NEO4 with RK3399 CPU and with 1GB RAM Schematic for looking at RAM and board wiring. RAM consist of 2 512Mb chips on one channel (second channel on this board is not used) RAM Chips: K4B4G1646E-BCMA 4Gbit(4096bit/8=512Mb) DDR3-1866 96Ball FBGA. CPU supports DDR3, DDR3L, LPDDR3, LPDDR4. There are at least 1GB DDR3 chips out there. (not sure about 2GB, and probably no 4GB) …

Hello, I'm running some busybox scripts in infinite loops. I have used them from long time, before I move to armbian, they work on openwrt without any problem , some of the machines was with uptime half a year and scripts never stop working. After I move to armbian, I noticed they stop from time to time. usually after 4-5 days of running. Script is run with output redirected to /dev/null There is no trace why script is stop working in the logs, so I run it in screen terminal and detach, it works more than a week without failing ........... is there a better way to see what is going on?

I've not found any image for qemu-system-arm -machine virt. Why? I personally need it for testing.

I want to create not big i2c-device module for training. But when I create new module file, I can't run Makefile, because ARMBIAN /lib/modules/(uname -r) doesn't have "build" file. My board is Orange Pi Zero H2+. ARMBIAN OS run on the board succesfully. Some detection of the i2c-device is succefully. How to create makefile that compile module file? Thanks

Hello, I have a cubitruck with Kodi which works quite well on an Armbian 5.20 Xenial_3.4.112 base and I want to upgrade to a new version. I recently built Armbian 21.08.0-trunk Focal with Linux 5.10.34-sunxi. I want to compile kodi on this new version but I couldn't find any information to make it work properly. Yet I have read on many posts that say it is possible but without a howto it is difficult. Any lead is welcome. Thank you

I am creating a script that can backup sd-cards running on the system, resizing it with desired value or via resize2fs calculated. I learn a lot but there are a few things I don't fully understand. When I create a backup I dd what I understand is the bootsector, ie I grab the "start" position of the partition I am backing up with fidisk and use that value and a blocksize of 512. I then add another 10mb (in bytes) just to be sure. Usually the bootsector is 8192 big, but not always (IIRC nanopi neo3;s is WAY bigger). dd bs=512 count=$DDBOOTSECTOR if=/dev/mmcblk0 of=$IMG_FILE conv=noerror,sync status=progress I then truncate the file, calculated eithe…

Hi everybody! Need some help with understanding of some stuff in my Orange Pi zero. I have next issue: I have Orange pi Zero and Huawei4510 3g usb modem. Orange pi do some measurement and send them on server. All this stuff works great.But: my provider have session limitation(3 hours). After 3 hour i lost my orange pi from netework, but i see that 3g modem lighthing as he have connection.When i turn-off modem from usb and plug it again, he lighthing that he catch network, but services doesnt sent data. i'm using wvdial for managing network connection over 3g modem. I have script whitch reload wvdial…

I did flashing the firmware of ZIDOO H6 PRO. After that, the original firmware does not boot (even when connected to the power source, the LED does not work). However, operating with firmware on ZIDOO H6 PRO will operate normally. I think something is LOCK in NVRAM. Has anyone solved this problem?

Current Hardware Setup: Rockpi 4C,eMMC module,eMMC to SD Card Adapter, M.2 Extension Board, NVME Drive, USB To Serial Debug Cable. OS: Armbian_20.08.1_Rockpi-4b_focal_current_5.8.6.img.xz (Right now, I'm using the above mentioned os from sdcard and the os can detect nvme disk using 'lsblk' command) Query: How one can install '/boot' partition on eMMC (or sdcard) and '/' (root-partition) on NVME disk (attached to rockpi 4c through M.2 Extension Board) ? (aim is to boot from either eMMC or ssd and use nvme disk as / partition) Waiting for your valuable suggestions. Thanks in advance from, Spherulite.

Hi, I am using Rock Pi 4B and want to be able to turn the system on after sleep (suspend/hibernate or any other state that would allow it). Previously, I have used MRAA library to set an interrupt, and called system("shutdown now") inside interrupt code. I did it according to the following post and according to the MRAA examples. I wrote a shell script, which executes the MRAA program. Shell script, in its turn, is called by a service on a start-up. So, with this method I was able to shutdown the system, but I cannot get out of this state via button press. I researched few posts, such as: 1, 2, and 3. It looks like either I have to modify …

I installed and compiled varios browsers based on QtWebKit - falkon, konqueror, otter-browser - and they are all pretty fast compared to their chromium/firefox colleagues. Unfortunately, the input of special characters (é, ñ, ü, ß) doesn't work. The letters appear as UTF code. However, the letters are displayed correctly in chromium/midori/firefox, and the console. Thus, I blame Qt. This is very annoying e.g. for webmailing and editing text, since typing in languages with special characters such as Spanish and German is practically impossible. Any idea how to fix that?

I am creating the image from source from the Armbian build repository on GitHub for an Orangepi5. I have altered the kernel configuration to force module signing. The .config is attached. My problem is that after the build there is no signing_key.pem in /certs. But when I get the source from Torvalds repository and not using Armbian build the file gets created. The following helps to realize the scope of my question: https://www.kernel.org/doc/html/v6.1/admin-guide/module-signing.html#generating-signing-keys .config

Hi, I use a cubieboard2 and have (due several SD crashes) added a small SSD using the nand-sata-install script. I wanted now to install iptables - but it complains about iptables -nL modprobe: ERROR: ../libkmod/libkmod.c:586 kmod_search_moddep() could not open moddep file '/lib/modules/4.10.12-sunxi/modules.dep.bin' modprobe: FATAL: Module ip_tables not found in directory /lib/modules/4.10.12-sunxi iptables v1.6.0: can't initialize iptables table `filter': Table does not exist (do you need to insmod?) Perhaps iptables or your kernel needs to be upgraded. Checking for the version I get uname -a Linux cubie2 4.10.12-sunxi #…

Hello, With NanoPI-m2 (debian jessie) and OrangePI-PC (ubuntu xenial) at hand, I try to detect states of hdmi and audio jack (plugged in or not). With nanopi I can get the hdmi state from syslog kern messages (HDMI HPD State 0x0 or 0x1, according to it's plugged in or not), but I haven't found something like that on Orange PI. And I've found no way to recognize if the audio jack is plugged in or not. Any suggestion, howto get that, will be greatly appreciated.

http://www.cubietech.com/ website is available and even lists CB9 for sale ! But http://cubieboard.org/ website which provides support for CubieBoard (and O.S images) is down ! What gives ? Is CubieTech dead or alive ? Where can I find any (new or old) Linux images ? (for Cubieboard 4, specifically; I also had Cubieboard 3 / CubieTruck lying somewhere, but I can't find it anymore ...) A new Debian like v10 "Buster" or v11 "Bullseye" will support outdated Cubieboards ? Thanks in advance,

Hi, I got several nanopi m1+ with armbian and some of them are working, but I cannot connect via ssh (conn refused) and other services like openvpn are stopped or not working but others like apache are working without problems. I don't know why it happens to some boards and other not, but it f... me because this board need new Has somebody got this problems too? Anybody knows a solution?

I installed Armbian_21.05.1_Odroidxu4_buster_legacy_4.14.222.img on HC2 and after this nextcloudpi with the actual curl script. Portsharing Port 80 and 443 in Fritz!box 7460 worked only for IPv4. An earlier installation of Armbian 14 months ago on the same machine worked under IPv4 and IPv6. It is a mystery for me. Could anyone help? http://ix.io/3nCZ Thanks

Good morning, I've got a Libre Computer Renegade, with Amrbian Bullseye minimal (on an sd card) . Changing HDMI monitors (of different sizes and resolutions) the board does not adjust automatically the resolution, so, sometimes the display is unreadable because written are too small, and I can't set a resolution to beng able to use it. Surfing armbian docs, it seems to be an environment problems that could be solved by chanching u-boot parameters. I tried to enter in u-boot command shell but I can't. Pushing backspace while it is booting make no effect (tried also with serial console but it didn't work). How can I enter in u-boot environment to set an …

Hello people, I am interested in designing a cooler for OPI Zero and OPI LIte. Next is the formula of calculus: I am NOT able to find next parameters: T_Jmax = this is the DIE(microprocessor) wanted temperature ---> is this 30-40 degrees best temperature for OPI for well functioning in parameters? P_DMAX = power that is generated by the losses of OPI Zero board and OPI Lite board. Q_jc = thermal resistance between DIE(microcontroller) and case Can please someone help? Thanks.

hi ! how can i install ffmpeg with h264_v4l2m2m and drm on jetson nano for now i install kynesim ffmpeg from rpi drm is working but no hwdec on mpv is there another repro like libreelec or kodi tom

Hello ... I have A10 sun4i tablet with Specifications listed below :- SoC A10 @ 1Ghz DRAM 1GiB NAND 8GB Power DC 5V @ 3A, 8000mAh 3.7V Li-Ion battery Features LCD (8") Touchscreen 5-finger capacitive (Focaltech ft5x_ts) Video HDMI (Type C - mini) Audio 3.5mm headphone plug, HDMI, internal stereo speakers, internal speaker, internal microphone Network WiFi 802.11 b/g/n (Realtek RTL8188CUS) Storage µSD USB 1 USB2.0 Host, 1 USB2.0 OTG Camera 1.3MP front, 5MP rear I download armbian for pcduino2 because of its have same hardware specifications for my tablet , then burn .img from "Ubunt…

Hi all, I'm trying to port a driver built for Raspberry Zero to Banana Pi M2 Zero. The original driver is here : https://github.com/pguyot/tagtagtag-ears (it's supposed to drive the ears of a Nabaztag, which recently got resurected thanks to an Ulule campaign). My understanding is that at least half of the problem is to adapt the device tree overlay for the BPI M2 Zero. If it"s not half of the work, it's definitely required. So far I've been unsuccessful. The original DTS overlay is like this : /dts-v1/; /plugin/; / { compatible = "brcm,bcm2708"; fragment@0 { target = <&gpio>; __overlay__ { gpio_encoder_left_…