Advanced users - Development

Hello, I've finally gotten around to writing the GitHub Actions based Linux Kernel Shallow git trees exporter. It's very simple, a single shell script and GHA workflow. It prepares shallow bundle (and ready-to-go .tar too) everyday on a schedule and publishes to GitHub Releases. Please take a look https://github.com/rpardini/armbian-git-shallow - theres a README that shows how to use the bundles outside of Armbian. If this is a good idea, I'd move it to armbian/kernel-git-shallow in GitHub. And then I'd start using those in armbian-next first as a test ground. I mention I few people I know are interested in the subject @Igor and…

Good afternoon dear gurus. help to transfer please system with sdcard to sata hdd in OrangePI +2. Debian jessy and additional software is established. what needs to be made? if it is possible, then on steps. the point is that I want to refuse completely loading with sdcard and emmc. To be loaded only with sata hdd. Thanks in advance.

Hi - Would it be possible to switch dev builds to 5.8 rc kernels? It looks like megous is already prepared for it ( atm rc1 ). Certainly I do realise the massive work filtering DT duplicates and applying fixes, etc ( the usual ) does come in here ... But rgd H6 this 5.8 kernel should hold important additions rgd: CPUFreq (DVFS), IOMMU, and MsgBox ( as well H3,H5 ) Therefore kindly requesting to skip 5.7 in dev and go straight for 5.8 which allows +/- two months of testing wich should be perfect for upcoming "Caple"-release in August.

On my Debian13 VM that I use to build images for my boards, I have started to notice new errors that I have not seen before after this part of the logs... [🐳|🌱] After updating and cleaning image apt list cache [ 30 files ] [🐳|🌱] Image installed package hash [ ✅ base-files = 1-trixie-1armbian1-Bb095-U13.8--deb13u4-R55fa ] [🐳|🌱] Image installed package hash [ ✅ linux-image-current-rockchip64 = 6.18.26-S1fe0-Dedd0-P1f35-Cc077-H8200-HK01ba-Vc222-Bed86-R448a ] [🐳|🌱] Image installed package hash [ ✅ armbian-firmware = 1-SAa38b-B96c8-R448a ] [🐳|🌱] Image installed package hash [ ✅ armbian-bsp-cli-rockpro64-current = 1-PC1e15-V9ab0-H3400-Bd2e9-Rf36a ] [🐳|🌱] Image install…

Hello Igor, hello buddies, [ o.k. ] Create and sign [ Armbian_4.5_Lamobo-r1_Debian_wheezy_4.2.3.zip ] [ o.k. ] Runtime [ 43 min ] -rw-r--r-- 1 root root 306M oct. 19 01:16 Armbian_4.5_Lamobo-r1_Debian_wheezy_4.2.3.zip (VM host : amd64 Ubuntu 15.10 8 GB 4 cores)it looks I made it, well, not me, the 'Armbian team' scripts The base of the Armbian "toolchain" is a very serious work/process. 1/ I guess 8 GB of RAM is a minimum for the VM. All my other tries (4GB) ended with a failure when applying "Armbian" on top of the "distro". note : other failure reported "upstart" as a problem (or a memory issue as the VM was beginning to fill the swap), otherwise the terminal …

This patch modifies the sunxi-dev/bananapi-r1-switch-driver.patch to work with the changed phy/mdio interface in 4.5. It was also necessary to revert commit 88f8b1bb41c6208f81b6a480244533ded7b59493 "stmmac: Fix 'eth0: No PHY found' regression" because it breaks networking on all my sun7i-a20 boards (bananapi, cubietruck, and bananapi-r1) From ce978c1235f68cf7bfeb81693d047afcee6df038 Mon Sep 17 00:00:00 2001 From: Werner Boellmann <WeeB@sample.net> Date: Mon, 15 Feb 2016 12:22:08 +0100 Subject: [PATCH] bananapi-r1 switch driver: Modifications for Kernel v4.5 --- drivers/net/phy/b53/b53_mdio.c | 63 ++++++++++--------------------------- drivers/net/phy…

Hello, Although Armbian is not the only one, most of the orange PI PC linuxes are not include XFS support so I had to go through a time consuming process to recompile the kernel by a guide which only works on Ubuntu 14.x (doh!): http://www.orangepi.org/Docs/Building.html Here is the kernel I made for the OrangePI boards, for those who miss the same thing: http://www.filedropper.com/orangepihwpacktar

Since kernel 4.18, on my rk3288 tv-box USB devices have always had problems when plugged in after the box boot (ie: USB device not working at all) I found that the problem is described and solved by this patch: https://patchwork.kernel.org/patch/10535905/ Applying it to latest 4.18.4 kernel the functionality is restored, and I can't see similar patches in rockchip-dev. I think it should be applied to all rockchip SoCs at least until it gets merged into mainline

I have Armbian Jessie running on a Orange Pi Lite board and the login script is showing the local loopback ip (127.0.0.1). It appears to be doing this because /etc/update-motd.d/30-sysinfo calls ifconfig -a and pulls the first ip, which in this particular case, is the local loopback. For the orangepi-lite, i wrote the following command in customize_image.sh and it fixes the problem in this case. sudo sed -i "s/ifconfig -a/ifconfig wlan0/g" /etc/update-motd.d/30-sysinfo It basically changes the script to pull the ip address from wlan0 instead of whatever one it finds first This could also be called from the command line for the same effect instead of during compilation.…

Did a clean build (deleted all cache & sources), for OPi+2E, Ubuntu development, with desktop. (up to commit 633824d) Build ok and copied on SD, yet after boot no HDMI screen came out boot [ OK ] Started Create list of required sta...ce nodes for the current kernel. [ OK ] Started Set console keymap. [FAILED] Failed to start Load Kernel Modules. See 'systemctl status systemd-modules-load.service' for details. [ OK ] Started Remount Root and Kernel File Systems. [ OK ] Started Nameserver information manager. root@orangepiplus2e:~# systemctl status systemd-modules-load.service Warning: systemd-modules-load.service changed on disk. Run 'systemctl da…

Hi! I have been using Armbian for long, but I am new to the Development/build system. I have however set the environment and I can build images. Now, I want to create a custom Armbian image with the following customization: - Separate ext2 partition for boot - second partition for LVM - Root Filesystem in Logical Volume and fixed size. - Cloud Init, with an extra partition for NoCloud Datasource. I see in the documentation how to install new packages, but not how to partition the SD card. How can I change the partitioning? On the other hand. Can I just build an image without compiling the Kernel? …

Hello, once I developed my appliance based on Armbian with Kernel 3.4. And the goal of the appliance was to work as custom USB gadget. The appliance was based on sunxi_usb_udc. Now, after big delay I returned to the need of bulding a new appliance with similar functionality. As far as I understand, there is a problem with UDC module in kernel 5.x. Am I right? Can I build my custom system based on legacy (v.4.x) kernel to workaround the problem or there is a better suggestion with available information for fast startup? Please advise. Thanks in advance.

There is a problem, can someone tell me the solution. There is a library of video surveillance systems manufacturer Assembly for Windows Linux x86 64 and Android. Is it possible to start the assembly of its application in the ARM Linux using the library for Android if it is assembled with the Bionic. I could not get: > LC_ALL=c g++ test.cpp -L. -lxmnetsdk -Wl,-rpath,. -o testsdk /usr/bin/ld: warning: liblog.so, needed by ./libxmnetsdk.so, not found (try using -rpath or -rpath-link) /usr/bin/ld: warning: libstdc++.so, needed by ./libxmnetsdk.so, not found (try using -rpath or -rpath-link) /usr/bin/ld: testsdk: hidden symbol `fstat' in /usr/lib/arm-linux-g…

Hi Wondering if anyone knew the algorithm that assigns mac addresses to orange zero. Is it based on something static/cpu id /...? or it is purely random. Will this mac change over time or after it is generated, it will stay the same? I have one zero that mac is pretty static and another changed mac after I did a upgrade. If I want better control of the mac address, what's the best way to make it static? this is on the mainline -jerry

Earlier today I pushed a fairy large patchset containing various functional improvements of many boards. If you have Allwinner board and some spare time: 1. Build DEV image/kernel with https://github.com/armbian/build (you need to add EXPERT="yes" to the config to unlock) 2. Install DEV kernel from beta repository Optional Defreeze kernel updates Switch to nightly kernel (armbian-config -> system -> Nightly) Reboot Switch to other kernel (armbian-config -> system -> Other -> DEV) When board came up, do some exploration. Most important information is to find out if there is a regression toward ker…

Hi I would like to add usbtv driver (STK1160) to the kernel, but I don't know how to use this information: https://www.olimex.com/wiki/STK1160-howto-linux-sunxi-3_4 Together with the Armbian repo https://github.com/igorpecovnik/lib

Hi, i will integrate a touchscreen ft5x_ts, resolution of 1024x600, gpu and uart0 debug. My system says that can't not found filesystem. Please take a look to the picture. I use: ubuntu 1404 lts server amd64 without gui and cubieboard2. If i compile it without modifiy boot.cmd it works. Red is modified. setenv bootargs "console=ttyS0,115200 root=/dev/mmcblk0p1 rootwait rootfstype=ext4 cgroup-enable=memory swapaccount=1 sunxi_ve_mem_reserve=190 sunxi_g2d_mem_reserve=16 sunxi_no_mali_mem_reserve sunxi_fb_mem_reserve=32 hdmi.audio=EDID:0 disp.screen0_output_mode=1024x600p60 panic=10 consoleblank=0 enforcing=0 loglevel=1" In the attachment (pdf) is the…

Hello, I'm tempted to load the Siano Mobile Silicon driver (TV adapter) into the Orange Pi PC more I'm not getting. I have performed the following procedures already: I put it in the / lib / firmware folder: isdbt_rio.inp I configured the smsmdtv.conf file (options smsmdtv default_mode = 4) in the /etc/modprobe.d/ folder I installed firmware-siano-rio_1.0_all.deb (sudo dpkg -i firmware-siano-rio_1.0_all.deb) Has anyone already set up the siano drive on linux? Thank you very much

The problem: I want to run my Banana Pi M2 Zero from a battery / powerbank setup. It works like a charm from a beefy powerbank capable of consistent 2A output [1], even with added 5" LCD screen to power at the same time and wireless keyboard transmitter. BUT it does hang up hard, I guess due to undervoltage, when powered from a smaller, weaker powerbank with a single 18650 cell and max output of about 500mA (theoretically 1A but let's underestimate, I'll try to measure it with an oscilloscope). Armbian with 4.19 kernel and Ubuntu 18.04 (but booting in text mode, without any GUI). The hangup occurs during services startup, usually around networ…

Does Armbian Kernel support aufs? https://en.m.wikipedia.org/wiki/Aufs I was wondering if FatDog a Arm version of Puppy Linux could be built by someone using Armbian as the base. I started a thread conversation on Puppy Linux forum. http://www.murga-linux.com/puppy/viewtopic.php?p=902082#902082

Namely the Network Manager. I recently just made a Debian Stretch Image for the ROC-RK3328-CC (Renegade) with the help of this and I would like to know for future reference, how to omit and add software to the final build. The build seemed to go fine and working like a charm, but Network Manager just gives me a headache and every now again doesn't come up during boot. Be real nice if I didn't have to depend on it or remove it after the fact, every time I wanna make a new image. Thanks!

I am trying to convert my recent experience into something more generalized, in order to improve documentation. I already split off into a new page of docs Recovery, now I would like to add a new section to that page about manually replacing u-boot. In my case, sunxi was pretty easy, but trying to generalize this it gets more complex. I am not too familiar, so I researched for a while today and I think I have some idea, but before I start writing I want to make sure I am recommending the right approach. Basically I think I will recommend in 2 parts: 1. Explain how to extract u-boot from deb package after downloading from e.…

Hello I am using a Debian 12 VM on Qubes OS 4.2 to attempt to build an Armbian image for a Rockpro64. As you can see by the build logs, these 3 commands are failing: update-binfmts --enable qemu-arm update-binfmts --enable qemu-aarch64 update-binfmts --enable qemu-riscv64 Then arch-test command output causes script to error out with: arm64: not supported on this machine/kernel So far I have attempted to enter the docker container and manually run the command but I get this error: root@1631353b980f:/armbian# update-binfmts --enable qemu-arm update-binfmts: warning: qemu-arm not in database of installed binary formats. upd…

Hello, I would like to share my experience about development and debugging inside Armbian. On the beginning I tried to use Code::Blocks. But it crashed too many times, mostly during simple file editing. Then I found better IDE - CodeLite. When I wanted to debug a program, I found I have to install GDB. After installing and configuring it, the debugging looked to be possible, but every attempt finished with segmentation fault somewhere outside of my program, even before the first statement in main function was reached. After several attempts, I uninstalled and re-installed GDB and this time found recommended additional component - libc6-dbg. Installing this component fixed…

Hi! I made a custom kernel with Buildroot. This give me a file called sdcard.img and other files. I want only the kernel to replace the existent kernel of my armbian distribution on my orange pi zero. What files I need? How I copy and replace the existent kernel? Very Thanks!

On Which image can I test? Any How? Go to armbian-config -> System -> Nightly and proceed. If this option is not there, defreeze upgrading Restart and after your system is up, proceed to one of those areas: - desktop install from armbian-config on top of CLI (any board) - set first_run_network configuration, setting ip within /boot/armbian_first_run.txt (any board except Espressobin) - kernel switching or upgrade (any board, especially Odroid XU4 NEXT) - setting fixed/dhcp network with armbian-config (any board except Espressobin) - configure frame buffer within h3disp utility (any h3 board with a legacy kernel) - DTS s…

Hi there! Issue: Installing required package for Python face_recognition takes almost 15-20 hours to install using my Orange Pi One. These are the commands I manually ran to my Orange Pi one: https://gist.github.com/jmcausing/d89d659ae43dff8f5ea8feea95fe2de3 Goal: I need a custom armbian image that has those package installed already. I tried: - Building armbian image using Virtual Box with ubuntu-22.04.1-live-server-amd64 - 30GB of Disk , 4GB of RAM and 6 CPUs - Edited the /build/config/templates/customize-image.sh and added those commands (see gist link above) to install the required packages -…

My recent RK3588 kernel adventure: - dual-core H.265 (HEVC) encoding working live at full 4K@60 on armbian-build edge kernel (6.19-rc8) for Rock 5B[+] and Orange Pi 5 Ultra. - fix for setting HDMIRX EDID (this didn't work in mainline on any of my tested hardware) This is out-of-tree (practical focus over upstream goals), but it's stable and producing clean bitstreams. Repo: https://github.com/rcawston/rockchip-rk3588-mainline-patches Feedback welcome.

for compiling Next LTS 4.19.y images I did try to update my build-system, but I do get errors on 2 packages which I cant resolve Does anyone had this problem and could tell me how to solve this? Or would it be more easy to reinstall the build-system? The following packages will be upgraded: libc6-armhf-cross libc6-dev-armhf-cross 2 to upgrade, 0 to newly install, 0 to remove and 0 not to upgrade. Need to get 2,904 kB of archives. After this operation, 0 B of additional disk space will be used. Get:1 http://de.archive.ubuntu.com/ubuntu bionic-updates/main amd64 libc6-dev-armhf-cross all 2.27-3ubuntu1cross1.1 [1,899 kB] Get:2 http://de…

Hello everyone, I have a screen of 1280x800 resolution. while connecting the screen to my rockpi-4b, the resolution is set to 1024x768, and there is no 1280x800 option in the display setting panel. after learning from Internet for days, I think the root is that my screen doesn't have a correct EDID information. so I made some changes to let the kernel ignores the screen's edid information and use specified edid file. The resolution is successfully set to 1280x800, the only problem is that the screen display is shaking, as the attached video shows. The edid file's timing settings are shown as below: I tried to change the settings but it doesn't wo…

Hello everyone First congratulations for this project. I just started playing with it recently and I am very impressed. Good job! I am the developer of NextCloudPi, which basically consists on providing Nextcloud images for the Raspberry Pi, but has evolved to other flavours such as docker x86 and docker ARM. It also features many scripts for managing the instance that can be run from a classic whiptail like TUI or a simple web interface. The initial goal of the project is to drive as many people away from dropbox into selfhosting, so there's also a Wizard and I try to ease the process of DDNS, certificates and so on. I am a…

I see you gentlemen, you are going after nanopi k1 plus. But it was nice to finish the nanopi k2. Because it's in the testing phase and it's on the well-known Amlogic chip 905. By the way, I'm waiting for K1 - I already ordered :-)))

Prior to entering an issue... One of the challenges of using an image based install is how to cover to machine unique items... Good example here is the systemd-machine-id... some systemd units can use machine-id in place of gethostid... https://www.freedesktop.org/software/systemd/man/machine-id.html It's supposed to be a unique qualifier for installation - but if this is written into the image, it's going to likely be the same for every image out there... Can always regen it on the shell - but this could also be in the first run script... $ cat /etc/machine-id \ && sudo rm -rf /var/lib/dbus/…

Is it my fault or the thermal trip points and cooling steps disappeared in Linux 5.1 on (at least) RK3288 devices? The "C/St." field from armbianmonitor -m disappeared: root@xt:/home/paolo# uname -a Linux xt 5.1.7-rockchip #5.88 SMP PREEMPT Sat Jun 8 13:06:26 UTC 2019 armv7l armv7l armv7l GNU/Linux root@xt:/home/paolo# armbianmonitor -m Stop monitoring using [ctrl]-[c] Time CPU load %cpu %sys %usr %nice %io %irq CPU 12:03:51: 1608MHz 0.58 7% 1% 5% 0% 0% 0% 58.6°C 12:03:56: 696MHz 0.54 4% 1% 3% 0% 0% 0% 58.6°C 12:04:01: 696MHz 0.49 4% 1% 3% 0% 0% 0% 56.8°C and if I launch a stress test the SoC happi…

recent days I find Chromebook may be better Arm devices with laptop form factor. compare with Pinebook pro, Chromebooks are cheaper, and mass product, and better tested. why no much people discuss how to install 3rd OS to its internal emmc, or reflash its uboot? I have searched on ArchArm forum, only 1 topic. but there actually a way to reflash uboot, and mainline uboot already has support for arm based chromebooks. It should be easy, but why no discussion?

Hello, I have just installed the Armbian_23.11.0-trunk.114_Orangepi5_jammy_edge_6.6.0-rc1_xfce_desktop.img It boots OK, but does not present any desktop, but I can ssh into it and configure In syslog I find lots of errors where lightdm fails due to: Sep 20 16:10:15 orangepi5 systemd[1]: lightdm.service: Scheduled restart job, restart counter is at 4. Sep 20 16:10:15 orangepi5 lightdm[2103]: Error getting user list from org.freedesktop.Accounts: GDBus.Error:org.freedesktop.DBus.Error.ServiceUnknown: The name org.freedesktop.Accounts was not provided by any .service files Sep 20 16:10:16 orangepi5 systemd[1]: lightdm.servi…

Hi, I found problem below today. I have stability problems with services running on BananaPro and therefore this is second problem after "kswapd was killing some tasks" I decided revert back to older kernel 3.4.109. I am only letting you know... Division by zero in kernel. [10616.338198] [<c0015098>] (unwind_backtrace+0x0/0x134) from [<c03e7ab8>] (Ldiv0+0x8/0x10) [10616.350152] [<c03e7ab8>] (Ldiv0+0x8/0x10) from [<c00e87ac>] (vmpressure_work_fn+0x80/0x180) [10616.360314] [<c00e87ac>] (vmpressure_work_fn+0x80/0x180) from [<c004ca00>] (process_one_work+0x12c/0x3b0) [10616.370009] [<c004ca00>] (process_one_work+0x12c/0x3b0) from …

I found this project very interesting and I would like to try Armbian for this new board Turris MOX. I've got your build environment working and tested my own build for a couple of supported boards. It was successful. I would like to ask you if you could help me in preparing the .config file for this board. Board Specification: https://mox.turris.cz/en/specification/ Documentation: https://doc.turris.cz/doc/en/howto/mox/mox-a-cpu Indiegogo: https://www.indiegogo.com/projects/turris-mox-modular-open-source-router

Hi @balbes150 thank you for a lot of great work on Khadas VIM. could you make it offically support by Armbian?

With just a few local test hacks, I was able to bring up kernel 5.10-rc1 on sunxi this morning (based on the new megous branch): root@air's password: _ _ ____ _ _ _ | \ | | _ \(_) / \ (_)_ __ | \| | |_) | | / _ \ | | '__| | |\ | __/| | / ___ \| | | |_| \_|_| |_| /_/ \_\_|_| Welcome to Armbian 20.08.14 Buster with Linux 5.10.0-rc1-sunxi System load: 2% Up time: 11 min Memory usage: 14% of 491M IP: 172.24.18.151 CPU temp: 34°C Usage of /: 24% of 7.2G Last login: Tue Oct 27 07:20:02 2020 from 172.24.18.20 root@air:~# cat /proc/version Linux version 5.10.0-rc1-sunxi (root@35504…

Hi all, I'm building a rpi5b image with some success. My build machine is a x86_64 GNU/Linux with a 1gb ssd and 32gb of ram . The image builds and boots fine but there is no wlan0 device available in the booted image. I can get it by installing the armbian-firmware-full package and rebooting apt install -y armbian-firmware-full reboot I thought I could include the install in the customize-image.sh script but I get an error E: Unable to locate package armbian-firmware-full ( line 515 in the log ) - any ideas guys

Would be anyone interested helping me collecting or making kernel fixes for H3? I already collect some fixes here: https://github.com/jernejsk/linux Question remains what to do with out of tree drivers like mali and wireless. I will probably add those which can be found in most SBCs. Igor, what is the plan with mali driver? Would be r4p0 acceptable? Userspace libraries can be found here.

I have worked with a BeagleBone Black which has a very nice feature. Out of the box you can connect it to a laptop via USB and it sets up a network between the BBB and the laptop. Is there some kind of equivalent to allow the USB OTG ports of these boards to be used for a PC to Device network ? I am particularly interested in the H3's

I'm on the most recent Armbian 25.2.3 Noble version. When I try the command $ yes | sudo apt dist-upgrade I get the following error: Reading package lists... Done Building dependency tree... Done Reading state information... Done Calculating upgrade... Done Get more security updates through Ubuntu Pro with 'esm-apps' enabled: ... Learn more about Ubuntu Pro at https://ubuntu.com/pro The following upgrades have been deferred due to phasing: gnome-shell gnome-shell-common ubuntu-drivers-common The following packages will be upgraded: thunderbird 1 upgraded, 0 newly installed, 0 to remove and 3 not upgraded. Need to get 68.6 MB of archives. After…

Hi, I am having some trouble to compile the kernel after I have made some minor changes to one of the source files. to minimize recompilation of unchanged code files I chose the following settings in compile.sh: KERNEL_ONLY="yes" SOURCE_COMPILE="yes" KERNEL_CONFIGURE="no" KERNEL_CLEAN="no" to avoid having my changes overwitten by the original files I set FORCE_CHECKOUT="no" # igre manual changes to source I am afraid I have not managed to recompile the kernel using these settings. What happens instead is: (1) the script still tries to sync with the source but produces some error messages: error: Your local ch…

After the upgrade from Armbian 5.11 to actual one, linux automatically loads the module BMP085 (I do not need it, I have my own program to support BMP180). How to block the loading of the module during restart of program? (rmmod removes temporarily only) Thank you for your help

Hi, while i was trying to work with the NTC C.H.I.P. i've started to take in consideration the ubifs instead of mounting all the system partition as read only. Someone have experience with ubifs? do it is supported by armbian? Someone can help me with some guide?

Hi all, please be aware that Pine folks in the meantime understood that recommendations to use WinDisk32Imager, dd and other non verifying burning tools are wrong, tried to recommend Etcher instead (as usual sabotaged by at least their most famous forum moderator) and now use finally a 'branded' Etcher 2.0 beta: https://forum.pine64.org/showthread.php?tid=4481&pid=27520#pid27520 I don't think it's correct to do it this way (and at least the macOS application sucks since not digitally signed and using a wrong so called 'bundle identifier') but anyway. Let's take this for a foresight. Etcher 2.0 uses catalog files in such a way: http:…

Hi. I trying to build image for orange pi3. I have fresh Ubuntu, "19.10 (Eoan Ermine)" sources 20.05.0-trunk and I got error: ... [ o.k. ] Extracting focal-desktop-arm64.f64...4db.tar.lz4 [ 0 days old ] [ .... ] focal-desktop-arm64.f64...4db.tar.lz4: 932MiB [44.8MiB/s] [======================================================================================================>] 100% [ o.k. ] Adding Armbian repository and authentication key [ /etc/apt/sources.list.d/armbian.list ] chroot: failed to run command ‘/bin/bash’: No such file or directory [ o.k. ] Applying distribution specific tweaks for [ focal ] chroot: failed to run command ‘/bi…

Hello, the new kernel versioning scheme consists of the latest git tag and several hashes: https://github.com/armbian/build/blob/main/lib/functions/artifacts/artifact-kernel.sh With boards like odroid-xu4 for which the upstream git is only updated occasionally, this leads to two problems: 1. the generated version is lower than what is currenty getting shipped: `5.4.228-S3043-De511-P0a53-C0750H6842-Bb436` vs `23.02.2` 2. it cannot be guaranteed that the versions go up reliably: 5.4.232 is `5.4.228-S3043-De511-Pc02c-C0750H6842-Bec1c` and 5.4.233 is `5.4.228-S3043-De511-P0a53-C0750H6842-Bb436` While I can understand using the kernel versi…

I found what a likely duplicate out-of-tree driver after investigating a warning from the kernel build: CC [M] drivers/gpu/drm/panel/panel-simple-dsi.o drivers/gpu/drm/panel/panel-simple-dsi.c: In function 'panel_simple_get_modes': drivers/gpu/drm/panel/panel-simple-dsi.c:310:73: warning: passing argument 3 of 'of_get_drm_display_mode' makes pointer from integer without a cast …

I am using Armbian 5.x images on the Orangi PI plus box since it appeared as it is stable and the most complete. root@orangepiplus:/usr/src/h3monitor# uname -a Linux orangepiplus 3.4.110-sun8i #18 SMP PREEMPT Tue Mar 8 20:03:32 CET 2016 armv7l GNU/Linux The LED visual board status is helpful during initial launching or headless usage. There is currently only one RED light for all the board statuses. It is somewhat confusing as for the Good running status. It is worth switching to GREEN, once the Armbian is loaded successfully and back to RED during the shutdown procedure. It is worth turning the red LED off after shutdown. This LED behavior has be…

Hello, I would like know, KSZ9031RNX this chip supported in old Armbian Linux 3.4.x? Where I can found information about Linux supported chips in the Linux sources?

I believe this question goes to @rpardini as maintainer of patches for Rockchip series in the `build` repo: I'm trying connect camera to Orange Pi 3B (yes, it boots from community support on edge kernels), but spent 2h digging to find no drivers for CSI2 from Rockchip's fork are ported to patches for recent kernels (for example: https://github.com/armbian/linux-rockchip/blob/rk-5.10-rkr6/drivers/phy/rockchip/phy-rockchip-csi2-dphy.c and corresponding device trees to instantiate these drivers). This is a little chicken egg problem as I need recent kernels to have access to open source GPU drivers - they're not present on 5.10 based original system i…

Hi, I hit a problem on pinebook where docker would hang with defunct processes consuming high cpu. A bit of googling turned up a known problem with aufs as the cause, so I grabbed the patches, combined them and created a pull request https://github.com/armbian/build/pull/772 I gave the resulting kernel a fairly good work-out this evening and it seems to be working fine now.

Hello. I am finished Armbian Jammy 22.05 Bulseye edge 5.16.20 gnome desktop on a Rockpi4 (rk3399). When I try to overclock from Armbian-config, it doesn't work. That is, I can enter the application, apply rockchip-rk3399-opp-2ghz.dtbo. Then reboot, go to armbian-config and set a new unlocked CPU clock speed of 2.2Ghz. But instead it is only available up to a maximum of 1.8hz. How can this be fixed? Do I have to create an image from scratch, or maybe there is some trick?

We developed so called Cloud images, which are a combination of minimal images + kernel with minimal set of drivers. Images also doesn't have any firmware packages, so bare OS comes down to 700Mb. Build from sources: ./compile.sh \ BETA=no \ BOARD=uefi-x86 \ BRANCH=cloud \ BUILD_DESKTOP=no \ BUILD_MINIMAL=yes \ ENABLE_EXTENSIONS=image-output-qcow2 \ IMAGE_VERSION=25.2.3 \ RELEASE=noble \ VENDOR="Company" \ VENDORCOLOR="5;100;115" \ KERNEL_CONFIGURE=no \ KERNEL_BTF=yes Customization: https://docs.armbian.com/Developer-Guide_Overview/ Details in promo style: Spoiler Very Fast Boot Time: Optimi…

I am using my orange pi zero 3 with an SPI 4.0" LCD, with driver panel-mipi-dbi-spi. It works great with Linux 6.13.7 (started with a self built image with edge, minimal, Bookworm) and older, but I am having troubles with 6.14.8. Result from armbianmonitor -u after upgrading to linux 6.14.8: sudo apt install linux-image-edge-sunxi64=25.5.1 I reboot and the SPI LCD starts the text mode console, then turns black instead of starting lightdm https://paste.armbian.com/ucoxuwetiq Also xorg log after "sudo startx" fails to start. Spoiler roberto@orangepizero3:~$ tail -n300 /var/log/Xorg.0.log [ 234.918] X.Org X Server …

I am working with a Hummingboard that has the 3.14.14-cubox-I kernel on it (was given to me with that version on it). I need to add a module (specifically g_hid.ko HID Gadget Module) which was not initially activated in the kernel build. I’ve tried making the module from the git repository (https://github.com/igorpecovnik/lib) and succeeded in building it, but it does not work on my hummingboard as a the module has vermagic of 3.14.14+ while my hummingboard has 3.14.14-cubox-i. I know I could just flash this new kernel onto my device, but I have some customization in place all ready so I would like to avoid that. So I am looking for help as to how I can get source c…

Since linux v5.4 armbian_build enables the CONFIG_RT_GROUP_SCHED config option. Some armbian users use the soft real-time features for either real-time audio (jackd), or control (eg. klipper_host_mcu), However, real-time group scheduling, enabled by this options complicates the user space configuration required to acquire real-time scheduling in applications and daemons. Setting ulimit -r or LimitRTPRIO= is no longer enough, it is also required to allocate CPU time for RT task. In a brutal way this can be done as echo 950000 > /sys/fs/cgroup/cpu,cpuacct/{system,user}.slice/cpu.rt_runtime_us JACK documentation recommends using c…

Since I was experiencing the eMMC corruption issue with u-boot 2017.11 & mainline, I'm back to the Armbian Xenial (legacy kernel) image. Everything works great, except I need to tweak the u-boot config slightly. To start, I'm just building the defconfig and then going from there. So for what I'm doing on my Ubuntu Bionic devel VM: $ git clone --single-brach --branch odroidc2-v2015.01 --depth 1 https://github.com/hardkernel/u-boot.git $ <apply the 2 patches from https://github.com/armbian/build/tree/master/patch/u-boot/u-boot-odroidc2 > $ export CROSS_COMPILE=aarch64-linux-gnu- $ make odroidc2_defconfig && make …

I want to add a private package with C source code in custom image. Extensions maybe are one approach— are there any other more standard practices?

Can someone tell me how to enable PWM in cubieboard2. I am using the latest ubuntu of armbian and vanilla kernel from this link. http://www.armbian.com/cubieboard-2/ Looking at /sys/class, I cant find any pwm folder root@cubieboard2:/sys/class# ls ata_device gpio iscsi_iface power_supply scsi_host ata_link graphics iscsi_session ppp spidev ata_port hwmon iscsi_transport pps spi_master backlight i2c-adapter leds ptp thermal bdi i2c-dev mdio_bus …

Hi there, Recently I flashed the latest armbian on a sd card and booted OrangePi 4. Everything works smoothly except for the audio. I just see HDMI {recording,playing} devices. But OrangePi 4 has an audio jack onboard and a built-in microphone. Here are more details: root@orangepi4:~# arecord -l **** List of CAPTURE Hardware Devices **** card 0: hdmisound [hdmi-sound], device 0: ff8a0000.i2s-i2s-hifi i2s-hifi-0 [ff8a0000.i2s-i2s-hifi i2s-hifi-0] Subdevices: 1/1 Subdevice #0: subdevice #0 root@orangepi4:~# aplay -l **** List of PLAYBACK Hardware Devices **** card 0: hdmisound [hdmi-sound], device 0: ff8a0000.i2s-i2s-hifi i2s-hifi-0 [ff8a0000…

Hi, could anyone provide a kernel (e.g. 4.3.3) with the patch for CVE-2016-0728? Or can anyone tell me how to patch and build the kernel - i only know the official way via "git an ./compile" described here in the manuals. The patch can be found here: https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=23567fd052a9abb6d67fe8e7a9ccdd9800a540f2 Regards, A.

Hello Igor, Good day. I have two questions regarding cubietruck(A20) kernel 4.9.7 source. 1. Where can I get kernel source 4.9.7 you use ? 2. Where can I get cubietruck(A20) patches for this kernel source you use ? I need this sources to clear some moments in a way of 2nd CPU start. Thanks in advance. Best Regards, Andrey

Stumbled across this while working on something else not ARM related, but it's pretty cool - since Armbian is looking at devices that have eMMC, this might be useful https://github.com/pepe2k/u-boot_mod Short story - it's a uBoot with a micro web server that supports flashing images, including uBoot itself - basically it turns things into a bit of a fail-safe as long as uBoot can execute... (those playing with the fire that is uBoot, keep your UART connections handy) Do I have some security concerns - absolutely yes... but no different than the UEFI that is on many x86 boards these days.

Hallo, with EXTENDED_DEBOOTSTRAP="yes" and ROOTFS_TYPE="nfs"my bananapim2 (jessie, next) has its / on /dev/nfs. After a few minutes it hangs with the error message: nfs: server x.x.x.x not responding, still trying To extend the timeout period I add timeo=30 (3 seconds) to nfs-boot.cmd. The result is: ubuntu:~# grep timeo userpatches/nfs-boot.cmd setenv bootargs "console=tty1 console=ttyS0,115200 root=/dev/nfs ${net_setup} rw rootflags=noatime,nodiratime,timeo=30 disp.screen0_output_mode=1920x1080p60 panic=10 consoleblank=0 enforcing=0 loglevel=6" # Banana Pi M2 root@m2-bare:~# journalctl --no-pager | grep nfs Jun 10 23:17:01 m2-bare kernel: Kernel command l…

Hello igor, do you know the same script but to build freebsd for cubietruck ?

I'm curious as to why we explicitly specify CPUMIN and CPUMAX values in the Armbian board configs, for most/all boards... These values of course propagate their way into the MIN_SPEED and MAX_SPEED settings in the target /etc/default/cpufrequtils configuration file (e.g., see lib/makeboarddeb.sh). If these values aren't specified, then the cpufreq driver will base its speed ranges on what the underlying H/W supports (e.g., specified via the board DT(s)). So...if the underlying driver configuration provides the supported speed range, then we actually need to specify these values? I ask because I'm running my H5 boards with my overlays t…

Hi all, First place, sorry if it´s a very basic question, I was searching info and reading topics, but I did not found a solution for my problem. I`m working with Linux version 5.4.29-sunxi I´m trying to compile my own char device driver. I noticed that I forgot adding kernel-headers in my build, so I tried to add them via apt install linux-headers-next-sunxi After that, I can see a new directory /usr/src/linux-headers-4.19.62-sunxi but if I´m not wrong, modules compiled with this headers won´t work in my kernel, cause headers version does not match with my kernel version. So, could please …

Hi there, I have now finally managed to apply the RT Kernel patch on the Bananapi. (Original Patch here: https://www.kernel.org/pub/linux/kernel/projects/rt/3.4/patch-3.4.108-rt136.patch.gz) The patch did not work out of the box and I had a bit of hassle to fix all of the rejected bits. To me the Banana Pi is best suited for audio production since it is very affoedable and it already comes with a usable audio out. To get the full benefit of the RT kernel patch it was necessary to thrn also reduce the buffer size of the inbuilt sunxi -codec audio driver. I can now play a synth using a buffer size of 512 samples glitch free. Here are some numbers: ansum@ba…

Hi Everyone, I am trying to compile armbian in my ubuntu 14.04 machine. Can someone identify what is this error Im encountering? Thanks in advcance. Compiling u-boot... │ │──────────────────────────────────────────────────────────────────────────────│ │ .config:617:warning: override: reassigning to symbol OLD_SUNXI_KERNEL_COMPAT │ │ # …

First of all, happy 2017! May Armbian be the great OS it is, forever more. Now, I wanted to compile Armbian from scratch so I can see if I manage to hardcode some overscan into the tv module (it seems there's no way around it), but for some reason I can't seem to get the compilation going. I downloaded ubuntu, put it in a VM (so fresh, aside from VMWare guest tools) with 60GB storage, got it up to date, and tried to compile Armbian (since I don't know how to compile a single module). Steps taken: sudo apt-get update sudo apt-get upgrade sudo apt-get install git git clone https://github.com/igorpecovnik/lib --depth 1 cp lib/compile.sh . sudo ./compile.sh Then "Ke…

I'm writing from a limited perspective, so constructive criticism appreciated. In this thread, I'm recording some thoughts about how the OS gets from files into the memory of various boards, and what might make this more unified and easier and/or more flexible. Current U-boot My knowledge comes from the mvebu64 and rockchip64 families. At this time, the board boot process starts from code in the processor that attempts to find u-boot, and u-boot runs a script from its environment that searches for a UEFI application or a boot.scr file. They call this "Distro-boot" Armbian uses the boot.scr to load an uncompressed kernel image and a compressed initramdisk, alo…

We have 6.6.rc1 kernel installed using Armbian_23.11.0-trunk.105_Orangepi5_jammy_edge_6.6.0-rc1_xfce_desktop.img.xz. I've also installed the Armbian Linux edge headers 6.6.0-rc1-edge-rockchip-rk3588 (linux-headers-edge-rockchip-rk3588 23.11.0-trunk.107). I am able to compile externel kernel modules. I would like to get the kernel source for the 6.6.rc1 kernel. I have cloned the main branch using: git clone --branch=main https://github.com/armbian/build And used the menu system by running compile.sh to select orangepi5 and other options. When it started building I could tell right away it was not working towards the 6.6.rc1 kernel…

Hi All, as I understand, new kernel does not support script.bin any more and uses something called Device Tree Blob. In source (DTS) file of this hell are two sections concerning LEDs: pinctrl at 01c20800 { led_pins_lamobo: led_pins at 0 { allwinner,pins = "PH2"; allwinner,function = "gpio_out"; allwinner,drive = <1>; allwinner,pull = <0>; } and this one: leds { compatible = "gpio-leds"; pinctrl-names = "default"; pinctrl-0 = <&led_pins_lamobo>; green { label = "lamobo:green:usr"; gpios = <&pio 7 24 0>; default-state = "on"; }; }; Is here somebody, who und…

Where can I follow detailed changes in (legacy) Armbian builds? Things such as: motd structure change introduce/remove Network Manager ... I have lots of setup scripts manipulating (e.g. using sed) the default Armbian files and they break if stuff changes... Are these changes coming from Ubuntu or from Armbian? Thanks a lot.

tonight as I was about to head to bed, I noticed low buzz coming from my Tinker board as if my fan was running. Sure enough it was running, I checked top and a couple processes were trying to read from the cifs share and had the cores pinned using 100%... I did some testing, I could read files from the cifs share but whatever I used would hang at the end of the file, cat, cp, etc... I also tried almost everything, nothing fixed the issue until I rolled back my kernel from Dev (4.14.0-rc1) to Next (4.13.2) then all the problems were gone. I also noticed on the 4.14.0-rc1 kernel booting and shutdown times were much longer... at least double of whats normal, this was true w…

I've start looking about the Switching DEV to 5.0.y ... I've done a preliminary trial for OrangePiPCPlus after disabling few patches, etc ... Installed with success ... Although it produce at lot of patch rejects, I think we should pursue the move to 5.0.y, even if it looks more painful than the switch from 4.19.y to 4.20.y done few weeks ago ... I'm also calling for help on this move, as I've seen lot of patch rejects in Lima patches : @JMCC are you the expert here ? For all Devs wishing to keep backup images of 4.20.y, build your images ASAP before the switch occurs ! Any concerns ? EDIT: Oh ! I alm…

Hi all! I need to back to an older kernel version that I had used past year. In my PC, I conserve without any kind of changes, the working directory used to run compile.sh. If I did not missunderstood my Armbian documentation reading, there is an option to tell compilation process that don't try to upgrade sources files before compile (touch .ignore_changes). Am I right? And, if it's fine, Could somebody please explain me where and how must I apply these parameter? Thanks in advances! Edit: You could ask. Why he want to re-compile if he has past_year.img file? The reason is I need to include kernel headers nad my old compila…

Hello, just discovered ability to support legacy USB gadgets. There is UDC called max3420_udc and also gadgetfs module. By using startup script mkdir /dev/gadget modprobe max3420_udc modprobe gadgetfs mount -t gadgetfs none /dev/gadget it appears to be possible to use old gadget developed for kernel 3.4. It was descibed once in the link https://forum.armbian.com/index.php/topic/1759-usb-gadget-built-for-h3-processor-on-top-of-gadgetfs/ just line else if (stat(DEVNAME = "sunxi_usb_udc", &statb) == 0) { should be replaced by line else if (stat(DEVNAME = "musb-hdrc", &s…

Hi there, i want to stick to the 4.4 kernel an tried to compile kernel 4.4.9 via: apt-get -y install git git clone https://github.com/igorpecovnik/lib--depth 1 cp lib/compile.sh . chmod +x compile.sh ./compile.sh after that, i built the following directory and file: mkdir userpatches vi userpatches/lib.config and added: KERNELBRANCH=â€v4.4.9†as described here: http://forum.armbian.com/index.php/topic/1008-how-to-compile-latest-kernel-447/ Whenn running ./compile, i get the following messages: [ o.k. ] Using user configuration override [ userpatches/lib.config ] …

Hi friends, I created a boot SD card with armbian for cubieboard A20 from this web site: http://www.armbian.com/cubieboard-2/ I insert card to cubieboard. System booting, but armbian is restart and shutdown. When I try turn on repeatedly, system booting and system is shut down. Video with the problem is here: https://youtu.be/E-gzpk1PnNQ Any idea, how resolve this problem?

Our default desktop wallpaper was done quickly and its not state of the art We decided to give you an opportunity to make a better one within this small contest. The best work will become a part of our desktop and the best of the best will become our default. Rules and guidelines: - minimalist design, dark and light version - embedded our logo and font in any color combination and size. - it must be your own creation - final work should be named and be available in following formats: 1920x1080, 3840x2160, 1650x1050, 1440x1080, 1280x1024 - it must be added as single image into the post and attached as ZIP with all formats as a reply on this topic. Pr…

I think we should do exactly the opposite. As soon as the author realizes that his codebase has begun to create stable images for the family\branch, he can invite the most active members of this group to test and fix bugs. That is, errors, changes must be made in this branch. While the master should remain stable and not create problems for the current work.

Hello, fresh installed Armbian desktop OS detects attached HDMI display as full HD with correct resolution 1920x1080. But after some restarts it loads in u-boot with correct resolution and then, on kernel startup switches to 1024x768 and also desktop opens with this resolution without an option to increase it. The armbianEnv.txt file in /boot folder contains string disp_mode=1920x1080p60 and was not changed. Please advise.

rpi4b8gb device. I am trying to disable wifi, bluetooth and ipv6 like I do on raspberry pi OS, but it won't play nice with me. Bluetooth & wifi I read https://docs.armbian.com/User-Guide_Armbian_overlays/ (it says it's WIP so that might be why?) and looked for the dtolverlays I use on rpiOS: $ ls -1 /boot/dtb/overlays/disable* | cut -d / -f 5 disable-bt.dtbo disable-bt-pi5.dtbo disable-emmc2.dtbo disable-wifi.dtbo disable-wifi-pi5.dtbo $ ls -1 /boot/dtb-6.12.31-current-bcm2711/overlays/disable* | cut -d / -f 5 disable-bt.dtbo disable-bt-pi5.dtbo disable-emmc2.dtbo disable-wifi.dtbo disable-wifi-pi5.dtbo They are there, ie disable-bt…

Hi there. Did anyone tried to get a recent kernel running under NanoPi M2? I got one board some days ago and would like to get a kernel running with DTS support. Thanks for any hints.

Hi guys, do you have idea why boot stopped? Check log below please. It was build about 25minutes ago but about 1 week younger build was working. U-Boot SPL 2017.03-armbian (Apr 03 2017 - 19:48:42) DRAM: 256 MiB Trying to boot from MMC1 U-Boot 2017.03-armbian (Apr 03 2017 - 19:48:42 +0100) Allwinner Technology CPU: Allwinner H3 (SUN8I 1680) Model: Xunlong Orange Pi Zero DRAM: 256 MiB MMC: SUNXI SD/MMC: 0 *** Warning - bad CRC, using default environment Setting up a 720x576i composite-pal console (overscan 32x20) Error: no valid bmp image at 66000000 In: serial Out: vga Err: vga Net: phy interface0 eth…

Hi there, I've tried to migrate from my old 16.04 ubuntu build machine to 18.04 regarding the documentation there is no need for extra packages. To get compile.sh running I've added build-essentials, ccache, make & libpython. Now there is a problem with openssl/bio.h. Is there a complete list of packages needed? I've set up my VM using the ubuntu-18.04.1-desktop-amd64.iso image. Is it solely failing by not using the mini.iso? Regards, Sebastian

We had a custom script that would perform kernel updates. As part of the update, we would look for this package and would make sure it was install. We are erroring out as this package is no longer installed. I am currently using 5.10.34-sunxi and was trying to update to 5.10.60-sunxi. The error is : E: Can't find a source to download version '21.02.3' of 'linux-buster-root-current-orangepizero:armhf' This was working as of a couple of months ago. (Looking at the armbian-config scripts, we are essentially following the same logic. We imagine this script would have the same issues. We tried running armbian-config, but did not have the switch op…

the main proposal of this research is to enable cached apt archives for docker build. first apt cache can be saved by a docker volume, but due to `${SDCARD}/var/cache/apt/archives` is not a constant, then we can't use `-v=apt-cache:${SDCARD}/var/cache/apt/archives` to enable it. so I use `-v=apt-cache:/root/.apt` as a tmp place for apt cache, when need `apt install` in `${SDCARD}`, use `mount -o bind /root/.apt ${SDCARD}/var/cache/apt/archives` and after install finishes, `umount ${SDCARD}/var/cache/apt/archives` this looks perfect, but after I check /root/.apt, everything is gone. I double checked whether *.deb are saved to…

Hi guys I cloned the build earlier with a view to building an image for a rpi5b git clone --depth 1 --branch main https://github.com/armbian/build and build/config/boards/rpi5b.csc was present. I've just refreshed the clone and it's not there - has it been removed for some reason ? Edit It's not on github either - am I going mad ? 🙂

I tried to used AppArmor under the Linux cubietruck 4.4.1-sunxi #10 SMP Wed Feb 17 17:57:20 CET 2016 armv7l GNU/Linux. But I get a kernel panic after i rebooted the system. Some questions: 1. Did you integrate AppArmor into the kernel? 2. Did you use an alternative mandatory access control? 3. Need I an additional kernel argument in the /boot/boot.cmd other than these "apparmor=1 security=apparmor"? 4. Is there a major diffenrece between your kernel and that from danad.de? Unluckily I was not capable of getting a dump from the kernel panic. If you need it, I would take a photo.

Hello! I have a board based on dual core SoC A20, I can run processes on separate cores? I want run Armbian on the one core and my module on other core. Thanks!

I am compiling H5 boards, Nano Pi Neo 2 (wip) and Nano Pi Neo Plus 2 (disabled board) and getting errors building u-boot. [ o.k. ] Compiling u-boot [ 1.0.0 ] [ o.k. ] Compiler version [ aarch64-linux-gnu-gcc 7.1.1 ] [ .... ] Checking out sources [ o.k. ] Started patching process for [ u-boot sun50iw2-nanopineo2-dev ] [ o.k. ] Looking for user patches in [ userpatches/u-boot/u-boot-sun50i-dev ] [ warn ] ... [l][c] add-FIT-config-name-match-function.patch [ failed ] [ warn ] ... [l][c] add-FIT-support-A64-spl.patch [ failed ] [ warn ] ... [l][c] add-FIT-support-H5-spl.patch [ failed ] [ warn ] ... [l][c] add-disp2-video-driver-jernej.patch [ fail…

Hi anyone else having issue with selecting specific kernel? Adding: KERNELBRANCH='tag:v5.19.16' to build/userpatches/lib.config does not switch. sudo ./compile.sh EXPERT=yes CREATE_PATCHES=yes BOARD=orangepizero2 BRANCH=edge RELEASE=bullseye BUILD_MINIMAL=yes BUILD_DESKTOP=no KERNEL_ONLY=no KERNEL_CONFIGURE=yes COMPRESS_OUTPUTIMAGE=sha,gpg,img CLEAN_LEVEL=make,debs,images,cache Will BRANCH=edge cause conflict?

Hi. I recently installed an Armbian 25.8.1 noble to an ODROID XU4 with CLOUDSHELL2. All is wonderful, except one thing. I can't make the small TFT work. I enabled the cs2 option in boot.ini, but did not solve the issue. Then it turned out the module loader in modproebe.d lokks as follows: options fbtft_device name=hktft9340 busnum=1 rotate=270 speed=35000000 force32b=1 bgr=1 but actually there is no such module (only hktft32 or hktft35, or ili9340 - none of these worked): /lib/modules/6.6.113-current-odroidxu4/kernel/drivers/staging/fbtft# ls -1 fb_agm1264k-fl.ko fb_bd663474.ko fb_hktft32.ko fb_hktft35.ko fb_hx8340bn.ko …

Hi Igor, I'm trying to build and update the kernel for the Lime2 board using the script you provided on github. I'm using linux sunxi 3.4.103. The only changes i've made in the kernel are in the sunxi-codec.c file, where i'm changing the values to some variables which should impact the latency on voip softphones. Here are the changes that i'm doing in "static struct snd_pcm_hardware sunxi_pcm_playback_hardware" and "static struct snd_pcm_hardware sunxi_pcm_capture_hardware" { - .period_bytes_min = 1024*4 + .period_bytes_min = 16*2 - .periods_min = 4 + .periods_min = 2 } The problem is that after running the script i get the tar file with 5…