Allwinner sunxi

Hi, can any one help to me how i creating wireless web server with Orange Pi Lite step by step , thanks

need some help the eth0 does not start in orane pi pc plus with armbian. The eth0 works well with android image.The wifi works well with the armbian. I tried the update using uImage_OPI-PLUS and uImage_OPI-PC but this did not help. This problem has been mentioned several times but I could not find a simple solution to it. Please any help.

My RPi PC2 was flashed the armbian OS which was downloaded from the main page ARMBIAN about 3 months ago. Yesterday, I found some packages update are available with "apt update". So I did the command "apt upgrade" . But from then on, the board never be boot up. From the console, the U-Boot version has been upgraded to 2017-09-rc4 from the old version 2017.01-rc1-g5df570f-dirty. I'd appreciate it if anyone could help with this or give me some suggestion. U-Boot SPL 2017.09-rc4-armbian (Sep 11 2017 - 03:34:11) DRAM: 1024 MiB Trying to boot from MMC1 NOTICE: BL3-1: Running on H5 (1718) in SRAM A2 (@0x44000) NOTICE: Configuring SPC Controller N…

Received a batch of OPi PCs and one is not booting. In serial console I get only: U-Boot SPL 2016.09 (Oct 15 2016 - 14:20:45) DRAM: 1024 MiB Trying to boot from MMC1 And that's all. What's wrong with it? SD card and PSU verified working with another OPi devices.

Display 4 * 20 i2s. It will be used to display information from mpd. How to do?

Is there Hardware virtualization support available for orange Pi PC3, which have H6 family processor ? Can we port Xen hypervisor over it ?

I want to use a shutdown button to make a secure shutdown with the nanopi neo air. But i am completly lost how it works. I don't find out, which GPIO's i can use for a script. And if i need a puuldown or not. Can somebody help me? Thanks Chris

Just installed the v3.7 / 14.5.2015 on my cubieboard, then when i load python, it say the version is 2.7.10~rc1 ???? I searched in the debian packages, even the unstable don't have this. And when i looked in sources.list i found the first line was testing, is this normal ? Jessie is stable no ? Well for now I think aptitude have fix my broken package, but I wanted to report you this weird thing.

Hi everyones, Last week, I tried to read the value from DS18b20 temperature sensor to log it in the monitor system I already have. But I could not get its value. I connect the DS18b20 with 4.7k pull up resistor to the pin 16th on the board, which is I guess is IO-4 [PH20] pin. What I have tried? - I have tried this: http://www.linuxx.eu/2014/09/banana-pi-temperature-sensor-ds18b20.html Step I did: Convert the /boot/script.bin to bananapi.fex, then add [w1_para] gpio = 4 to the end of file, save and convert it back to /boot/script.bin. Reboot. Problem: No w1 dir found in the /sys/bus (expecting it will show w1 dir b…

Hi, I am trying to use the SPI interface on the board GPIOs of a BananaPi M1+. I have started the latest version of Armbian available for this board (Armbian_19.11.6_Bananapi_bionic_current_5.4.8) and after the initial configuration the "/boot/armbianEnv.txt" file has the following added lines: fdtfile=sun7i-a20-bananapi-m1-plus.dtb overlays=spi-add-cs1 spi-spidev param_spidev_spi_bus=0 I have rebooted but I am unable to use the spidevX.Y under the "/dev" folder. What am I missing? NOTE: I have tried several combinations of values on the armbianEnv.txt configuration file (ie: using only overlays flags without the other ones, using only the spi-spidev flag,…

SULVED! Cant get the wifi operate as i want it. i am using the nmtui tool for configuration. The following logs are with Lan0 connected. ------------------------------------------------------------------------------------- Welcome to ARMBIAN 5.25 stable Ubuntu 16.04.2 LTS 3.4.113-sun8i System load: 0.43 Up time: 29 min Memory usage: 27 % of 1000Mb IP: 192.168.178.19,192.168.178.58 CPU temp: 16°C Usage of /: 12% of 28G Last login: Mon Apr 17 17:09:41 2017 from 192.168.178.49 root@myboard:~# route Kernel IP routing table Destination Gateway Genmask Flags Metri…

Hi I have problem with Cubieboard2 powering off during Legacy Armbian_5.14_Cubieboard2_Debian_jessie_3.4.112 boot. It had been explained a little bit here: http://forum.armbian.com/index.php/topic/1178-cubieboard-1-legacy-boot-failure/ So maybe I need uBoot upgrade. I had written SD card with command: dd if=Armbian_5.14_Cubieboard2_Debian_jessie_3.4.112.raw of=/dev/sdd bs=1M and upgraded uboot from here: http://phelum.net/temp/CB2/u-boot-sunxi-with-spl.bin with command: dd if=u-boot-sunxi-with-spl.bin of=/dev/sdd bs=1k seek=8 full boot output here: U-Boot SPL 2016.05-12902-g0e6e34a-dirty (Jun 19 2016 - 21:55:16) DRAM: 1024 MiB CPU: 912000000Hz, AXI/…

I tried to download the Opi plus 2 Image in armbian download page, but it linked In to Opi plus which is older hardware. There Are only plus 2e and plus Image. Here is the link : https://www.armbian.com/orange-pi-plus-2/ How can I get the image of Opi plus 2 ?? Plz let me know:(

I have device named "atol hub-19" with A20, runs on old 3.4 kernel (fex based system configuration) ... there is a way to do convert .fex to dt ? I used Armbian_5.59_Lime2_Ubuntu_xenial_default_3.4.113_desktop.img and change script.bin... and the device works fine

Good afternoon. I don't know how to solve a small problem. There is Orange Pi Lite. It runs its own program. The program uses spi-dev and display. You need to compile drivers for the network card. And then a problem arose. I cannot install linux-headers-current-sunxi on a working distribution (the latest one available on the website Armbian_23.02.2 5.15.93 ). And if you set “Community maintained”, then it is impossible to enable spi-dev and the display (Arbian-Config is missing in the repository) How to solve this problem?

Is there any option to change the boot screen of the armbian in orange pi, during startup. And i also want hide the boot text during shutdown. I m new to armbian and orange pi I m using orange pi pc plus 2E. Can anyone help me please. Thanks in advance.

Hi, Noobee here. I'm using a NanoPi NEO with the latest legacy image updated. Using ssh to access device. Linux Lap 3.4.113-sun8i #4 SMP PREEMPT Wed Nov 22 13:45:28 CET 2017 armv7l armv7l armv7l GNU/Linux In the journalctrl log I'm getting repeated failures for ntpd and cron about every minute. 1) The router that I'm connected to is IPv4 only. In nmtui I'v set the connection to ignore IPv6, but it seems that IPv6 has not been disabled. A IPv6 IP address has been assigned to the wireless interface. Should I be doing something else? 2) Cron is constantly doing something with armbian-updates. Is this normal…

How to Disable or Hidethe text that scrolls during boot armbian orange pi?? thanks for your reply!!

I recently created some new images using the most recent armbian scripts. For some reason my Jessie image is not coming up (see my other thread regarding network not coming up), but I did managed to get a wheezy image up and running on my BananaPi using latest / next. The problem I am having is the partition size is extremely small (about 500-600MB) and does not appear to be resize to fully utilize the SD card. It's been a long while since I created an image, but I vaguely remember the image resizing to maximize the SD card space. I basically had to manually resize the image by deleting and recreating the partition. Is there some way to specify the image size …

I'm using OPi LTS and cant change state of PA13-14-15-16 pins. I trying on fresh Armbian Bionic. Checked SPI is disabled. Trying this code for access pins: import OPi.GPIO as GPIO pin = "PA13" GPIO.cleanup() GPIO.setmode(GPIO.SUNXI) #GPIO.setwarnings(False) GPIO.setup(pin, GPIO.OUT) GPIO.output(pin, 1) and take this error altrough write in code "GPIO.cleanup()" ERROR: "UserWarning: Channel PA13 is already in use, continuing anyway. Use GPIO.setwarnings(False) to disable warnings." When trying "GPIO.setwarnings (False)" before change output of pin. Pin voltages when write "1" to output: PA13 -> 3V PA14 -> …

Hi everyone, after getting Igor's image for Jessie with kernel 3.4.109 on January 10th, I did an upgrade and now I get: uname -a Linux cubieVDR 3.4.110-sun7i #10 SMP PREEMPT Mon Dec 28 11:48:43 CET 2015 armv7l GNU/Linux However, unfortunately I also get modprobe bcmdhd modprobe: FATAL: Module bcmdhd not found. According to http://www.armbian.com/documentation/, it does not say anything about having to do something special to obtain the module in the section called "How to set wireless access point?". Also, on another machine running kernel 3.4.108, everything is working fine (see my post in this forum). What do I need to do to get the AP working? Cheers…

Currently I receive rustc crashes after memory usage get to 3GB (1GB RAM + 2GB SWAP) when building firefox. After looking around why, I found that kernel isn't build with lpae extension. Although H3 soc supports lpae (Large Physical Address Extension), but kernel has CONFIG_ARM_LPAE flag not set and so we can't use more than 3GB of memory (1GB is reserved for kernel). (Processors that implement the ARMv7-A Large Physical Address Extension (LPAE), expand the range of accessible physical addresses from 4GB (232 bytes) to 1024GB (240 bytes) a terabyte, by translating 32-bit virtual memory addresses into 40-bit physical memory addresses.) After looking a…

Hi!. I'm trying to run mpv on an orange pi plus 2e but it is giving me the following error: Failed to open VDPAU backend libvdpau_sunxi.so: can not open shared object file: No such file or directory [Vo / vdpau] Error when calling vdp_device_create_x11: 1 Error opening / initializing the selected video_out (-vo) device. I have also tried running KODI and it does not run. I am using version 5.25. I'm newbie Thank you very much!

Hi, I have the following issue: I installed Armbian 4.3 Debian (wheezy) 3.4.108 for Micro. My device is A20-Olimex-Olinuxino Micro with nand. I installed it to boot from NAND and store the rootfs on SATA /dev/sda1. When I powered it up with HDMI connected to the TV and micro sdcard plugged in, I see the red armbian logo shows up, but then display turns off and nothing. If I login with ssh I see that /boot is mounted to NAND and rootfs is indeed in /dev/sda1. If I boot without micro sdcard plugged I don't see any display output on the TV, but still the device boots up and the mounts seems the same, /boot on /dev/nand1 and /dev/sda1 is the rootfs. Perfect so I wante…

Hi, I installed the latest cubietruck image with kernel 3.4 and xfce4 like described in the FAQ. Everything works fine so far, except that the screen goes black after 30 minutes of inactivity or so and doesn't come back by pressing a key or moving mouse. It seems like a screen suspend or so and the monitor doesn't get any signal. I haven't installed any powermanager and Cubietruck is still running and everything is accessable via ssh, even x11. After reboot screen is working again till theres the above described inactivity. /var/log/syslog has only this message I don't understand: localhost rsyslogd-2007: action 'action 17' suspended, next retry is Tue Aug 18 12:…

Hi guys, Yesterday I updated my Orange PI PC with build 5.10. I want to build custom wifi driver using dkms. Dkms requires kernel scripts but scripts build fails with following error: root@orangepipc:/usr/src/linux-headers-3.4.112-sun8i# make scripts scripts/kconfig/conf --silentoldconfig Kconfig fs/Kconfig:287: can't open file "fs/fs_compat.kconfig" /usr/src/linux-headers-3.4.112-sun8i/scripts/kconfig/Makefile:33: recipe for target 'silentoldconfig' failed make[2]: *** [silentoldconfig] Error 1 /usr/src/linux-headers-3.4.112-sun8i/Makefile:493: recipe for target 'silentoldconfig' failed make[1]: *** [silentoldconfig] Error 2 make: *** No rule to make target 'includ…

Hello, it is been awhile since I used armbian with Orange PI, now I took one orange PI NEO on it's connector is UART0, UART1 and UART2. My goal is to use all UARTS available on board. Googling a little I found the part where I should use BIX2FEX to convert script.bin and insert port definitions there, bot looks like that way is obsolete. looks by default only one uart is initialized: root@nanopineo:/boot# cat /proc/tty/driver/serial serinfo:1.0 driver revision: 0: uart:16550A mmio:0x01C28000 irq:49 tx:11630 rx:0 RTS|DTR 1: uart:unknown port:00000000 irq:0 2: uart:unknown port:00000000 irq:0 3: uart:unknown port:00000000 irq:0 4: uart:unknow…

After running the armbian-install program and selecting option "1 'Boot from SD - system on SATA, USB or NVMe'" the program transfers the contents of the SD card to the drive (SATA or NVMe). And it works. The problem occurs after booting - a message appears about the device being unable to mount /media/mmcboot . And indeed - the contents of /media/mmcboot and /boot are empty. The problem turns out to be the contents of the /etc/fstab file generated on the SATA/NVMe drive. The mount point /media/mmcboot has a only UUID value, but the text "UUID=" is missing before the value. After manually adding it, everything starts fine. If someone could lean in and correct th…

After having my old debian (wheezy? or jessy?) unbootable from systemd update I decided to clean install. Having gotten a good Power supply, an A1 Speed 10 SD card, etcher image, and armbian debian 20.08 (also tried 20.07), The board boots (Welcome to armbian) up to "network interfaces up) - then the screen goes blank/black, and I get the green led heardbeat (slow blinking) for a while. Pushing power again the board shuts down (green LED blinking rapidly for a moment, then red power LED comes off). I have had installed boot to nand / Sata disk before but all that shouldn't matter I think because the boot from SD Card seems successful - why could it be th…

dear All. I need CAN-BUS on my cubie2. I Found that I can reach it via PH20-PH21 Mux-4 and fortunately they are maped to extention port. So I made FEX modification like : [can_para] can_used = 1 can_tx = port:PH20<4><default><default><default> can_rx = port:PH21<4><default><default><default> Currently my board run with --> 3.4.107-cubietruck I found a banananian guy post ( http://www.lemaker.org/thread-13107-1-1.html ) a tutorial on how he make it for his BananaPI board. I tried to follow his step, but skip steps about uImage and firmware .. since I don't know how to adapt it to Armbian. when the proses complete…

Hello Community, I have a (hopefully) quick question about the SATA port on my Bananapi. I wanted to attach a msata card via adapter to my Bananapi, like I already do on my Cubietruck. However when I start look for the msata drive it does not show up. However when I double check the drive via a USB SATA adapter the drive does show up. Could someone please tell me what is going ? Thx, blub4747

Hello, I'm running Armbian wiith Kernel 3.4.112-sun8i on an Orange PI PC. In addition I compiled WiringOP patched for Orange PI to check GPIO. I have connected a transmitter which communicates using SPI and an additional GPIO PIN to send interrupts. The device is not working yet and I try to find out the problem. It works fine with an Rasp. For example, I'm a little bit confused about the following: /sys/class/gpio/gpio5/direction shows me "in" "gpio readall" shows me: | 18 | 1 | OUT | GPIO.5 | 5 | 24 | Of course, I could change the mode using the gpio command, but I would expect, that both values match? Could it be too, that the inter…

In the last weeks I've successfully installed Armbian Debian Stretch 5.59 onto a Banana Pi M2 Berry, now I'm trying with a Banana Pi M1. From https://www.armbian.com/bananapi/ I've downloaded the Debian Stretch image and wrote it to my 4GB SD-card using Etcher (on Windows 10) - Etcher meant it was successfully after writing. I've safely ejected the SD-card from Windows, plugged it into the Banana Pi M, but it tries to boot from the network. Then I've taken a look at https://dl.armbian.com/bananapi/archive/ and downloaded Armbian-5.59 Debian Stretch image, wrote it with Etcher again, booted. Same issue. It shows a red armbian logo with "initializing boot loader…

Hi igor, when are you going to release the next version (4.1.15) of your debian based image? I wait for it to be able to set up the testing server soon for a new system. Thanks in advance for your contributions and for your efforts Best regards, ireng

I have an Orange Pi Plus 2 that has worked with Android installed for a long time. But now I needed to install Linux on it. I needed to find a Linux image to install on it, and I've already got several, but all the ones that worked, and that were on the login screen, didn't go beyond that, since in none of the 4 USB ports the keyboard worked and I imagine the mouse. I read somewhere that the image Armbian_5.38_Orangepiplus_Ubuntu_xenial_default_3.4.113_desktop.7z or Armbian_5.20_Orangepiplus_Debian_jessie_3.4.112_desktop.7z, but I don't know where to get it, hoping to solve all the problems. Can someone give a helping hand, please?

After connecting the wireless adapter we run the following command: lsusb the output is Bus 004 Device 003: ID 148f:7601 Ralink Technology, Corp. Trying to install armbian driver (Linux nanopim1 3.4.113-sun8i #18 SMP PREEMPT armv7l GNU/Linux) for lb-link model: wn155a "MTK7601 chipset" wireless adapter (150Mbps) using the following commands: sudo apt-get install linux-headers-generic build-essential git sudo apt-get install git git clone https://github.com/flexiti/mt7601.git cd mt7601 make clean make sudo make install sudo mkdir -p /etc/Wireless/RT2870STA/ sudo cp RT2870STA.…

Hi, I received a Banana Pi M2+ board on which I installed ARMBian. Their is only one problem for sound. Audio out is only available on HDMI. As I will use this board with no display, keyboard and mouse connection how may I get this board playing sound ? Two ways but I do not know which one is possible : 1) does it exist an HDMI to sound 3.5mm jack adapter ? 2) which USB bluetooth dungle works perfectly on ARMBian I may use to pair this board to a portable bluetooth speaker ? Sincerely thanks. Have a nice day. Miguipda ;-)

Dont know whats wrong, but none of the images on the page are working, tried to burn them with ApplePI-Baker and Etcher, but no luck. Board boots fine with stock android image. There was someone in here that got it working with an image called Armbian_5.27_Orangepizeroplus2-h5_Debian_jessie_dev_4.11.0.img.xz but where do I download that image ?. And yes I know there is loads of problems, but wanted to test som perfomance on the board. Hope somebody can point me in the right direction

I've installed this library on an Orange Pi PC Plus running 'Armbian 5.31 stable Ubuntu 16.04.3 LTS 3.4.113-sun8i' with all updates and I would like to use wiringPiI2C but it doesn't work with either /dev/i2c-0 or /dev/i2c-1. My USB storage CRO device shows no output at all when I attempt a write to an I2C device on connector pins 3 and 5 (BCM pins 2 & 3). the 'gpio' app and 'blink' example apps that come with the library wiggles these and other pins as outputs, no trouble at all. I'm porting a library that interfaces to a DS3232 or DS3231 real-time-clock chip from Arduino and have used the initialisation sequence from the example in the WiringOP librar…

Hi, I'm trying to set up my Orange PI 2 with very specific resolution. I tried a lot of advices from this forum but still can't force it to work. I've used jernej's U-Boot to see correct parameters for monitor and then recompiled kernel with these params. There is U-Boot output: hdmi_core.c line: {MODE_XXX, 0, 297000000, 0, 2160, 1200, 2266, 46, 40, 20, 1464, 234, 28, 2, 0, 0, 0, 0, 0} hdmi_bsp_sun8iw7.c line: {YYY, 1, 0, 0, 8, 2, 4, 0, 28, 0, 0, 112, 106, 40, 20, 176, 264, 1, 1} script.bin setting: pll_video = 297 My monitor is connected by HDMI cable, I set my mode using "h3disp -m" command and also I tried different params in "[hdmi_para]" section in scrip…

I've read many posts here and understand the OPi0 wireless chip isn't very well liked. I'm trying to setup hostapd with both client and AP functionality. I can get AP working only if I dedicate wlan0 to it. It seems that virtual devices (eg iw dev wlan0 interface add uap0 type managed; ip link set uap0 up) don't work with the current jessie image, making it impossible to have both AP and client simultaneously. I'm happy to help with testing the driver, but I'm no expert and certainly not knowledgeable enough to code this sort of stuff. If there's any help to be had, I'd be grateful.

Hello everyone, I am new to the world of Orange Pi 3 LTS 1.4 and Armbian. I have very recently installed this os on my Orange, it turns out to work almost everything correctly except Wifi and bluetooth. It is really important for me to get Wifi working for various projects I have in mind and I find armbian very reliable and supported. When I try to connect the Network Manager interface returns: On the net I found various discussions about this but no real solution. Does this happen to you as well? It seems not to recognize the wifi chip. Below is the armbianmonitor: https://paste.armbian.com/iteheqokov …

Hi all, I'm working with a BPI-P2 board. I installed the last Armbian version for BPI-M2 as the two boards are basically the same except the RJ45 connector and the eMMC. I installed it on an SD card, and everythig worked perfectly. Now I need to put the OS on the eMMC and then completely remove the SD card, but I'm struggling. The default Armbian for BPI-M2 is not intended to support eMMC, so I'm not surprised that with this version the eMMC dosn't show up. So I tried to modify the dtb and enable the eMMC nodes, and then reboot. Here the changes I made: mmc@1c10000 { reg = < 0x1c10…

Hi! I'm new to Armbian and M2+ and I have this problem: The boot process is stopped, if there is an USB-device like keyboard or mouse adapter connected at power-up. After pressing reset button, boot is performed normally. Without USB devices no problem. There is the last image running: Linux bananapim2plus 3.4.112-sun8i #14 SMP PREEMPT Tue Jul 5 16:28:14 CEST 2016 armv7l U-Boot 2016.05-armbian (Jul 05 2016 - 16:26:30 +0200) Allwinner Technology arm-linux-gnueabihf-gcc (Ubuntu/Linaro 5.3.1-14ubuntu2) 5.3.1 20160413 GNU ld (GNU Binutils for Ubuntu) 2.26 Booting stops here: ..... [ 2.241754] sunxi_spi_chan_cfg()1376 - [spi-0] has no spi_regulator. […

if anyone is interested https://github.com/igorpecovnik/lib/issues/311

Hello, First of all thanks for your very good job on armbian !!! I cannot adapt screen resolution on olimex A20 micro + 10 inch LCD (connected on board). normal resolution is 1024x600. I tried some varions in boot.cmd, as : setenv bootargs "console=tty1 root=/dev/mmcblk0p1 rootwait rootfstype=ext4 hdmi.audio=EDID:0 disp.screen0_output_mode=1024x600@60 panic=10 consoleblank=0 enforcing=0 loglevel=1" many variation as -1024x600 -1024x600 @25 @50 @60 MR-16, or other thinks found on net... The screen never correctly configured. Boot text is bad, graphical work, but not at right resolution visible area is cutted/bad placed...) Did you have advice ? Thanks ! I al…

OPiPC2, with Armbian Bionic desktop mainline based kernel 4.19.y Using it as headless server, all X and desktop stuff removed. Using PuTTY to log in via SSH, line drawing stuff (as usual) only works if translation is set to ISO-8859-1 in PuTTY. mc looks great, but all ncurses-based software (aptitude, htop, bmon etc) does not. Main problem seems that horizontal spacing is "shrunk" whenever there is no text to keep it: This is even more dramatic for menu systems and anything that is column-oriented. Tried dpkg-reconfigure locales to switch system to ISO-8859, but no change, really seems to be an ncurses bug. No such problem…

Hello, I have just built an image with the default parameters of the Lime A20 board. It seems that the system does not detect any sound card. aplay -l aplay: device_list:268: no soundcards found... uname -a Linux lime 4.13.6-sunxi lsmod Module Size Used by cfg80211 376832 0 rfkill 20480 1 cfg80211 sun4i_gpadc_iio 16384 0 evdev 20480 1 at24 16384 0 sun4i_ts 16384 0 sun4i_gpadc 16384 0 nvmem_sunxi_sid 16384 0 sun4i_ss 24576 0 uio_pdrv_genirq 16384 0 uio 16384 1 uio_pdrv_genirq As you can see above, there is no module related to sound. …

Has anybody got this working with mainline kernel? When I do: brcm_patchram_plus -d --patchram bcm20710a1.hcd --enable_hci --bd_addr 11:22:33:44:55:66 --no2bytes --tosleep 1000 /dev/ttyS1 I get this: option patchram with arg bcm20710a1.hcd option enable_hci option bd_addr with arg 11:22:33:44:55:66 option no2bytes option tosleep with arg 1000 /dev/ttyS1 Previous discipline = 0 Done setting line discpline Current discipline = 0 Waiting CTS... And there it stops. No dev hci0 created. I woulb be thankful for any hints that point me in the right direction. Paul

I used the wrong power adapter this morning on one of my OPI PC... what could go wrong? So far, I noticed that the poor U5 - SY8008B regulator overheated and blew. From the schematics, this seems to be connected to "AVCC" (the H3's PLL and the TV out). U11 isn't outputting anything, but chip select is off. Since this is the USB host, I'm not too surprised. Is it worth trying to reflow a new regulator on ? Wondering...

Hello I`m download newest version Armbian desktop for my Orange Pi. Install the following packages sudo apt-get install tightvncserver sudo apt-get install xrdp But I have error when I want connect to desktop from my Windows 7 Additional I try to connect use VNC Viewer but resulution is small and visual desktop is other the wwhen I`m normally attach HDMI monitor to OPI.

Dear Armbian community, not sure if this the right place for this thread, please feel free to move it. I'm testing the Debian Installer Buster (alpha release) after seeing that there is (partial) support for the 5 there is (partial) support for the•Orange PI zero (H2+) and other boards. It seems that the u-boot packages in Debian miss the u-boot build for the Orange Pi zero and support for the Ethernet controller as it seems it is not the mainline kernel yet and seems to be needing some work in order to be available in kernel 4.15. Armbian already includes the u-boot build and has support for the Ethernet controller of the Orange…

Hi, i tried to get an infrared transmitter working, but without success. An /dev/lircX device is never created. I'm using an NanoPi Neo and want to use lirc. The pwm_ir_tx/gpio_ir_tx modules are loaded but i can't see a device. Can anyone help me? Best regards Joachim

I am trying to install my newly bought D-Link DWA-131 E1 on my Orange Pi PC with theLinux orangepipc 4.14.18-sunxi #24 SMP Fri Feb 9 16:24:32 CET 2018 armv7l GNU/Linux. I googled from the internet and there are so many guides which will not work for me. I almost messed up my OS and the installation still failed. I already re-flash the microSD card with a new "Linux orangepipc 4.14.18-sunxi #24 SMP Fri Feb 9 16:24:32 CET 2018 armv7l GNU/Linux". I am here looking for help if some one experts here can guide me through out the installation. I really appreciated for your help and thank you in advance. Best regards, …

Please help, what I am missing? With legacy kernel installed acpid and pressing power button on OpiOne gives me events (monitoring with acpi_listen). Same thing not working with next kernel 4.14.18. Do anybody have solution?

Hello, Is it possible to get a WiFi-Direct connection from OrangePi Lite to for example smartphone and send a file to it? I mean with not using router. Thanks in advance for every answer!

I don't know it was mentioned before but Orange Pi PC Plus with WiFi and 8GB eMMC built-in is already available in Aliexpress store http://www.aliexpress.com/store/product/Orange-Pi-PC-Plus-ubuntu-linux-and-android-mini-PC-Beyond-Raspberry-Pi-2/1553371_32668618847.html price USB 19.99

Hi, I'm trying to use the popular LTE USB modem Huawei E3372s (Stick mode) with NanoPi Duo. Modem is in Network card mode - USB_Modeswitch was installed and started root@nanopiduo:~# lsusb Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 002: ID 0525:a4a7 Netchip Technology, Inc. Linux-USB Serial Gadget (CDC ACM mode) Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 003: ID 12d1:1506 Huawei Technologies Co., Ltd. Modem/Networkcard Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 …

After installing the Bullseye version in the Orange PI3, I launched the Kodi installation. The videos however are in slow motion, with the audio at normal speed. Are there any codecs missing? The video driver? Thanks

Hello, I have a GPIO pin that is high when starting the board. I am trying to force it low. Taking a look at gpio readall +-----+-----+---------+------+---+---Pi ?---+---+------+---------+-----+-----+ | BCM | wPi | Name | Mode | V | Physical | V | Mode | Name | wPi | BCM | +-----+-----+---------+------+---+----++----+---+------+---------+-----+-----+ | | | 3.3v | | | 1 || 2 | | | 5v | | | | 12 | 8 | SDA.1 | ALT5 | 0 | 3 || 4 | | | 5v | | | | 11 | 9 | SCL.1 | ALT5 | 0 | 5 || 6 | | | 0v | | | | 6 | 7 | GPIO. 7 | ALT3 | 0 | 7 || 8 …

I am on Debian 7.9, kernel 4.1.6-sunxi. Since a couple of days I get an error message when I want to open a LUKS container (e.g. cryptsetup luksOpen ...). /dev/mapper/control: open failed: Kein passendes Gerät gefunden --> no device found Failure to communicate with kernel device-mapper driver. Check that device-mapper is available in the kernel. Kann die Gerätezuordnung nicht initialisieren. Ist das Kernelmodul dm_mod geladen? --> is dm_mod really loaded? I tried to manually load dm_mod and get another error message: > modprobe dm_modlibkmod: ERROR ../libkmod/libkmod.c:554 kmod_search_moddep: could not open moddep file '/lib/modules/4.1.6-sunxi/modules.dep…

I have several OpiOne Plus boards. They differ by the date of manufacture (let's say 1st batch and 2nd batch) 1st batch: Works with kernel 5.10.x but does not boot kernel 5.15.x. Red light is on, power meter shows very little consumption, ethernet does not go up. Switching to last available 5.10.x kernel resolves the situation. 2nd batch: Successfully work with both 5.10.x and work with 5.15.x. Green light is on, power meter shows adequate consumption, board works. I'm pretty sure, that no more "new" opi one plus will appear at Xunlong shop and this issue won't be fixed in visible future. But well.. How I can "freeze" kern…

I installed the latest 5.4.8 Buster Desktop image on my Orange Pi +2e board but find the Mali drivers are (Utgard) missing or not loaded. I have tried to follow every possible links including (https://linux-sunxi.org/Mali_binary_driver) related to get VDPAU / VAAPI and GPU but with very little success. I want to have HW acceleration enabled for playing MPEG in full screen mode 1920x1280 resolution using mpv. The frame drops are significant. Questions: Are Mali drivers included in this build? If it is then how can I go about adding those drivers. Is there any licencing issues in adding Mali drivers to the Armbian image? Is there any chances of Lim…

Using a clean install of Armbian 22.02.1 with Linux 5.15.25-sunxi on a NanoPi NEO the green & blue LEDs no longer work. Previously they have worked with both Armbian and DietPi. # uname -a Linux nanopineo 5.15.25-sunxi #22.02.1 SMP Sun Feb 27 09:23:25 UTC 2022 armv7l GNU/Linux # cat /sys/devices/platform/leds/leds/nanopi:green:status/trigger cat: '/sys/devices/platform/leds/leds/nanopi:green:status/trigger': No such file or directory # cat /sys/class/leds/led{0,1}/trigger cat: /sys/class/leds/led0/trigger: No such file or directory cat: /sys/class/leds/led1/trigger: No such file or directory # ls -lha /sys/class/leds/ total 0 drwxr-x…

Hello, Since the kernel 5.3, used for ARMBIAN reached EOL: http://lkml.iu.edu/hypermail/linux/kernel/1912.2/04661.html Is there any movement to a new kernel version?

Hello every one I'm new to this site and I have recently purchased an Orange Pi Win Plus but got a lot of issues in configuring it. I'm now able to blink LED through Shell and C with WiringPi but I couldn't find any working Python 3 based Library for GPIO. I installed WiringPi from : https://github.com/OrangePiLibra/WiringPi This actually helped me to access GPIO through C/C++ and Shell but I couldn't find any thing for Python that's working. I came accross a new Python Library : "pyA64" but its not working. Also, the library "OPi.GPIO" doesn't supports my Board. I also tried this : https://github.com/lanefu/WiringPi-Python-OP but that's makes my "gpio" com…

Helllo i have problems with an huwei e220 usb umts stick ther i don´t working under igor image only with banian 14.01 the stick is working

I just downloaded the most recent mainline image for the NanoPi Neo (Ubuntu_xenial_dev_nightly.7z). It boots and runs fine. However, I was trying to access the UART1 on /dev/ttyS1, but apparently it is not enabled by default.The dmesg output is: dmesg | grep tty [ 0.000000] Kernel command line: root=UUID=d9678417-38b4-4c2b-993e-04cdea0247de rootwait rootfstype=ext4 console=tty1 console=ttyS0,115200 hdmi.audio=EDID:0 disp.screen0_output_mode=1920x1080p60 panic=10 consoleblank=0 loglevel=1 ubootpart=eeb8ef06-01 ubootsource=mmc sunxi_ve_mem_reserve=0 sunxi_g2d_mem_reserve=0 sunxi_fb_mem_reserve=16 cgroup_enable=memory swapaccount=1 [ 0.000973] console [tty1] enab…

I am a former Dietpi singer of praises (aka as Igor calls us evangelists[not anymore] will now refer to it as the other distro or dp I suppose)...until they kyboshed the armbian based dp images for the orange pi series of SBC's...since then...have attempted to go back and forth with varying success (mostly failures) Going to bite the bullet and go full armbian...been battling getting good wifi connectivity (using my Orange Pi Lite boards as octoprint servers for my 3D printers) After building my own hybrid armbian/dp crossbreed distro for Orange Pi Lite and getting it successfully upgraded to their V6.9 well...it started flipping out, so gonna come…

Hello Guys, I want to use airodump-ng (Aircrack-ng Suite) or Kismet to get all WiFi Clients in the area. For that, I would like to use the internal WiFi Chipset (so I don't have to use an external WiFi Dongle). My problem is, after I enable the monitor mode (with iwconfig and/or airmon-ng), which gives me no error and it says, the monitor mode is enabled, I am getting no results with Airodump-ng nor Kismet. Are there any solutions for this problem? Is is the driver not capeable of using monitor mode? Thanks in advance, KittFanNr1

I got 2 x Orange PI pc+ running Armbian (install by same SD card on eMMC). My two orange pi pc+ got same wlan0 mac address. I did research on forum and saw some suggestion about bug of Network-Manager. I try remove (purge) Network-Manager but see no difference. I also try look in u-boot but don't know how to set mac address on the u-boot part. How should I make my 2 pc+ board have difference mac address? want to run these two board under the same wifi network. Please suggest. Thank you very much in advance.

Hello If I would like to build a specific Kernel (5.1.15-sunxi64) that I have already made before and just want to add some patches to the kernel, what is the right command? ./compile.sh BOARD=bananapim64 BRANCH=5.1.15y RELEASE=bionic BUILD_MINIMAL=no BUILD_DESKTOP=no KERNEL_ONLY=no KERNEL_CONFIGURE=no INSTALL_HEADERS=yes

Hello, I have connected a microSD module to the SPI1 CS0 pins Is there a way to mount an SPI device? I tried, but I got this error: mount: /mnt/sdcard: /dev/spidev1.0 is not a block device. What is the best way to easily manage files on this secondary SD card?

Hi, I'm using Armbian Linux on a Cubietruck A20 device configured as a media, file and backup server. Unfortunately while trying to fix a persistent SATA-cable connection problem I accidentally pushed the FEL button on the device. Now the device is always booting in FEL mode searching for USB devices, and I'm unable to reverse this. I have been looking at multiple pages about the FEL mode but I'm unable to find useful information on how to quit or exit this FEL mode and to have the cubietruck booting as it did before. Although I'm not a Linux novice, the information about FEL is quite complex and I have to admit I'm clueless about how to fix this s…

You need to connect the equipment via the I2C bus with a frequency of 1 kHz or 10 kHz to Orange pi 3 (OS Armbian Buster with Linux 5.3.9-sunxi64). Supported setting of these frequencies and how to change correctly? Recoded sun50i-h6-orangepi-3.dtb to dts: cd /boot/dtb/allwinner/ dtc -I dtb -O dts -o sun50i-h6-orangepi-3.dts ./sun50i-h6-orangepi-3.dtb nano ./sun50i-h6-orangepi-3.dts What should be done next to set the frequency of 1 kHz or 10 kHz to the i2c-0 bus? Thanks.

Hi, I thought instead of waiting for mainline kernel support for these boards, if it would be possible to use Allwinner H6 BSP 4.9.56 kernel? Found at https://github.com/Allwinner-Homlet/H6-BSP4.9-linux I am able to compile it on Sunxi's Ubuntu 16.04 Beta image, however from the serial output it seems to at least have trouble with the sd card initializing. I tried to copy over the sd card information in sdmmc@04020000 from Sunix's own /boot/orangepi/OrangePiH6.dtb into Allwinners sun50iw6p1.dtsi but the boot only went a little further ending in a similar kernel panic to when I used the the BSP4.9 with Sunxi's original OrangePiH6.dtb. I am not very skil…

http://arstechnica.com/security/2016/05/chinese-arm-vendor-left-developer-backdoor-in-kernel-for-android-pi-devices/ Troubling read.

Please help me to install printer to my OPI PC i use Armbian_5.05_Orangepih3_Debian_jessie_3.4.110_desktop.zip OPI sees the printer in usb but because of my low level of knowledge i only use tools in x desktop (windows like) , so i couldnt find any on desktop The main aim is to setup printer and make it sharable in wireless network (wlan is ok) so please help me to setup my printer step by step i d really appreciate it if you help

So continuing from this thread since i dont wanna threadjack im facing a simular issue using this image used rufus instead of suse imagewriter since its defunkt on windows 10, have tested the sdcard with 0 errors took about 3 hours to do so since im using a 32gb card for my server. Warning: Only 30418 of 30419 MByte tested. Test finished without errors. You can now delete the test files *.h2w or verify them again. Writing speed: 5.57 MByte/s Reading speed: 8.19 MByte/s H2testw v1.4 So same scenario as the ubuntu distro Found U-Boot script /boot/boot.scr [ bytes read info ] ## Executing script at 43100000 ** File not found /boot/.next ** ** Unrecognized filesystem type…

Is this the reason why I don't see my soc temperature and how I can I solve?

Creating a wireless access point through armbian-config fails in the new 22.02 release for the popular TP-Link TL-WN725N USB Wifi Dongle. I am raising it here because it worked previously on 21.08. I have tracked it down to be related to a driver change. Release version 22.02 uses the r8188eu and in fact this is one of the drivers the Hotspot configuration actually warns you about. Could this commit be related? In order to overcome this I have downloaded the official TP Link driver sources. but failed to compile them because headers are missing (even after using armbian-config to install headers). I have also followed the official documentation to learn about…

Hello! Please help! How I can include Cyrillics (Russian) in consoles? I need keyboard layout pattern and the console on Cyrillics. apt-get install console-setup keyboard-configuration console-cyrillic dpkg-reconfigure locales dpkg-reconfigure console-setup dpkg-reconfigure console-cyrillic dpkg-reconfigure keyboard-configuration It doesn't help. Problem with console-cyrillic. Such package is absent.

Hello everybody, I am running 3.4.113 on my Orange Pi Zero like a charme. Now I was trying to install aircrack-ng-1.2-rc4. I am getting the following error: So I checked on the missing libnl: So for me it looks ok, does anybody have any idea how to fix the error? Thanks for some help

Can anyone answer here do bionic kernel supports HDMI output for Opi PC boards? Please suggest a solution as I have taken Opi PC board which has Armbian Bionic Image but no HDMI sound is coming out.

Hi, I am using the Armbian NanoPiDuo image and I have enable sound through armbian-config. It work well except for a small issue. When a file is sent to play, it misses out on about .5 seconds of the first part of audio. So if I run speaker-test -t wav, instead of the sound playing "front left" it just play the work left, the continues playing "front left" correctly. If I stop speaker test and run again straight away it work as planned. If I wait a few seconds the original problem occurs. To my basic knowlege, it seems like it is initialising the sound out. Is anyone else having this problem? Are there any settings I can adjust to …

Hi, I'm not able to make my DAC to work on my Banana Pro. It's PCM 5102 DAC and it worked on my previous Armbian Wheezy My config: uname -a Linux bananapipro 4.11.6-sunxi #6 SMP Fri Jun 23 19:56:18 CEST 2017 armv7l GNU/Linux The DAC doesn't appear: aplay -l **** List of PLAYBACK Hardware Devices **** card 0: sun4icodec [sun4i-codec], device 0: CDC PCM Codec-0 [] Subdevices: 1/1 Subdevice #0: subdevice #0 I looked in armbian-config tool but there is nothing to activate overlays I looked in folder /boot/dtb/overlays but saw nothing about I2S I would like to do as I did before, I edited the fex file but I can't fi…

Hi Community, I'm having problem loading armbian images from SD card. Is there nand image for CT? Thank you for reply in advance Gary

One of the Bananapi-m1+ GPIO pins is connected to an LED that I need to illuminate as quickly as possible after power-on. Using an older Fedora Linux release, it turns on in 3 seconds. Using a recent Armbian build, it takes 45 seconds. I've tried many ways using services with early "After=" targets, to access /sys/class/gpio/* interfaces more quickly, and this improved it by 5 seconds, but it's still too long. So I tried adding a device tree overlay to set the default value in the pin controller. I am confident the DT overlay is getting read and parsed properly, based on seeing artifacts in debugging streams, but still, no LED illumination. Anybody got any ideas on …

Hello, Unfortunately as I read from forums mainline kernel has no driver for gc2035 and v4l2 driver. I have tried Armbian_5_65 and Armbian_5_59 debian stretch but they are not contains these drivers and eventually modprobe command fails. As I understand, I have 2 different solutions to run camera on my system; 1- Going back to legacy build. But I do not know how to go back the legacy build which is last supporter these drivers. 2- Installing required drivers. (Also I want to prefer this solution because going back to legacy build may cause some bugs) How can I install required drivers to mainline stable build and where can I find …

Hi, I'm using the very latest armbian build fpr orangepi+, and i'm trying to nat the network from a wireless interface to another wireless interface. My own LAN works, dns server works too, so i can connect to the orangepi+ but i can't make nat working. Is there some known issue about it, or a custom tutorial for nat with this build? thanks for help

Hello, I'm using an SPI device with my board and kernel 3.4. It works like a charm, except that in the bin/fex file I had to add the following lines : [spi_devices] spi_dev_num = 2 [spi_board0] modalias = "spidev" max_speed_hz = 1000000 bus_num = 2 chip_select = 0 mode = 3 full_duplex = 0 manual_cs = 0 [spi_board1] modalias = "spidev" max_speed_hz = 1000000 bus_num = 1 chip_select = 0 mode = 3 full_duplex = 0 manual_cs = 0 without those lines, no /dev/spidevX.Y Now I'm testing new kernels (Jessie Kernel 3.19 / 4.0.4 mainline) and it seems that the bin/fex is ignored now. It uses the device tree files. (/boot/dtb/) but I don't know what I have to do to get my…

ARMBIAN 5.41 user-built Debian GNU/Linux 9 (stretch) 4.14.34-sunxi, Orange Pi Zero board. Very limited Debian installed, wifi doesn't work. I found lines install xradio_wlan /bin/false install 8189es /bin/false in /etc/modprobe.d/blacklist.conf and removed it. In /etc/modules-load.d/modules.conf I added the lines 8189es xradio_wlan. No help, wi-fi didn't work, nothing about xradio or wifi in dmesg. I figured out that there was no drivers (modules) for wifi. Found this article https://linux-sunxi.org/Wifi I execute the commands from the article, section RTL8189ES / RTL8189ETV The driver has its own repository: git clone https://github.com/jwrdegoede/rtl8189ES_li…

No sound card on 5.0 trusty vanilla, but it works on jessie. trusty: aplay -l aplay: device_list:268: no soundcards found... on jessie: aplay -l **** List of PLAYBACK Hardware Devices **** card 0: sun4icodec [sun4i-codec], device 0: CDC PCM Codec-0 [] Subdevices: 1/1 Subdevice #0: subdevice #0 Both are armbian 5.0 with kernel 4.4.1, on Cubieboard2 Also warning on installing cryptsetup on trusty: update-initramfs: Generating /boot/initrd.img-4.4.1-sunxi cryptsetup: WARNING: failed to detect canonical device of /dev/mmcblk0p1 cryptsetup: WARNING: could not determine root device from /etc/fstab This error doesn't appear on jessie. Also, on trusty the ha…

Hello guys, im new here and i hope to get some help I bought recently an cubietruck and i installed armbian on it. No i set up openvpn with my client config and tried to start it, without success. Thats the error message: What should i do?

Hi, RTL811AU wifi dongle has different wlan number each time it is plugged in or system started. It has different MAC as well. Numbers after wlan corresponds to attached MAC addresses. my sysem is OrangepiPC with development kernel. dmesg shows following (I have removed a plugget in the same dongle 3 times)

After boot a armbian Image: Debian server for banana pi, I done: apt-get update apt-get upgrade During the the upgrade I notice some text regarding Linux headers, and I found it on /usr/src linux-headers-4.9.7-sunxi linux-headers-4.9.12-sunxi But none 4.10.12 as the one is installed. uname -a Linux bananapi 4.10.12-sunxi #7 SMP Wed Apr 26 02:44:12 CEST 2017 armv7l GNU/Linux Googling on how to get this one installed was not usefull. My main issue is compiling dahdi for asterisk. It gives the error: You do not appear to have the sources for the 4.10.12-…

Hi, I am having a strange problem with my Orangepi One, I previously had a python script which was run on login using .bashrc. The python script controlled VLC using the python bindings and hence I could not use crontab -e or rc.local as they are run in the backgound. Previously .bashrc worked without any issues however either I updated VLC or armbian and now it does not run after I login (even using an autologin). Strangely enough however if I login via SSH the script runs. To access it I use : sudo nano /home/user/.bashrc To run the script I append to the end of the file without making any adjustments: echo Runnin…

Hi guys, I updated my Orange Pi Lite some time ago and it caused it to stop booting. The boot log is below. Can someone please help me recover this? I'm not sure where to start. I've loaded the SD card into an Ubuntu VM and it reads perfectly fine. U-Boot SPL 2022.07-armbian (Feb 17 2023 - 22:31:53 +0000) DRAM: 512 MiB Trying to boot from MMC1 U-Boot 2022.07-armbian (Feb 17 2023 - 22:31:53 +0000) Allwinner Technology CPU: Allwinner H3 (SUN8I 1680) Model: Xunlong Orange Pi Lite DRAM: 512 MiB Core: 61 devices, 16 uclasses, devicetree: separate WDT: Not starting watchdog@1c20ca0 MMC: mmc@1c0f000: 0, mmc@1c10000: 1 Loading Environment from FAT…

A couple of years ago wifi worked without any problems on old version of Armbian, but on the current version It doen't work completely. Any suggestions? uname -a Linux HAMServer 5.4.45-sunxi #20.05.4 SMP Sun Jun 14 21:46:20 CEST 2020 armv7l armv7l armv7l GNU/Linux lsmod | grep 8189fs 8189fs 1069056 0 cfg80211 413696 1 8189fs ifconfig eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet 192.168.88.16 netmask 255.255.255.0 broadcast 192.168.88.255 inet6 fe80::8385:e766:9c48:e593 prefixlen 64 scopeid 0x20<link> ether 02:81:a4:6e:47:9e txqueuelen …

I have an orangepizero (https://www.armbian.com/wp-content/uploads/2018/02/orangepizero.png) I installed Armbian_5.90_Orangepizero_Ubuntu_bionic_next_4.19.57.7z on 32GB sd. The pi0 is powered via pin with a 5V/5A power supply, norflash mx25l1606e. The HDD is a new working 80gb maxtor powered by an external USB 2.0 box. I have also connected the serial and read the boot information. I used armbian-config and transferred armbian to HDD and it works, but I have to keep the miniSD plugged in. I ask you can boot from HDD and not use any SD? PS I read almost all posts here on the forum and tried the old procedures but it does not work. Spoiler =&g…