Allwinner sunxi

Hi, I am using Armbian_jessie_4.5 with kernel 4.3.x on a Banana pi. When entering any systemctl related command, I get the following error: Failed to get D-Bus connection: Unknown error -1 Any idea on what the problem might be? It's a fresh install.

Hello folks, Based on the important amount of work you guys put in the H3 support and the great progress you've made, thank you for that, I am seriously considering buying an Orange Pi Plus (I need Gigabit Ethernet for my application). I need a server config with remote desktop via vnc, rootfs on SATA HDD, good ethernet performance, don't need Wifi, 24/7/365 operation. I just noticed there is two versions of the Orange Pi Plus, the "regular/original" with 1GB of memory and the "Plus 2" with 2GB of memory. Considering the price difference I am thinking of going with the "Plus 2", more memory never hurts, and I was wondering if I would encounter any issue using the …

Tried to build kernel only for OrangePih3 ( I have an Orange Pi One) and the build failed while trying to patch u-boot. Below is the install.log file since the forum software won't let me upload a file of type .log and once I tried, it won't let me attach anything, but that's another problem... Which turned out to be a cockpit problem ;>P +++++++++++++++++++++++++++++++++++ Displaying message: Preparing host info Displaying message: Host system support was not tested rosa wrn Config: linux-sun8i-dev Kernel source: https://github.com/wens/linux Branch: h3-emac linuxsource: linux-sun8i-mainline Offset: 1 bootsize: 0 bootloader: git://git.denx.de/u-boot.git bootso…

Dear all, I need your help. I've built a fresh pcDuino3 firmware: Armbian 5.14 Pcduino3 -default - Debian 8 Jessie - CLI - Kernel 3.4.112 And now I'm trying to enable UARTs (2, 5 and 6). I've edited script.bin and now I got 4 ttyS devices. Could you please tell me how to "atctivate" those UARTs and which pins shoul I use. I guess that UART2 (ttyS1) uses D0 and D1 pins UART5 (ttyS2) uses SPI0_CS and SPI0_CLK pins UART6 (ttyS3) uses SPI0_MOSI and SPI0_MISO pins Am I right ? And how to enable ttySs? I tried following for the UART2 echo 1 > /sys/class/gpio/export echo 25 > /sys/class/gpio/export I attached my fex. file and pcDuino3 schema Unfortu…

In my /boot/config for 3.4.112 I have CONFIG_SUNXI_PWM=y yet there is no /sys/class/pwm-sunxi directory. Do I need to do anythig special to control onboard PWM? This is stock Armbian 5.16 with legacy kernel.

I'm trying to recompile the image from source (because I want the kernel with SATA PMP support, and I got the SATA port multiplier and 3 drives ready), but failed in the last step. As the attached image, the problem should be caused by "Device or resource busy". I'm using a fresh downloaded Ubuntu 16.4 VB image and follow every instructions in github. So, how can I get rid of it? Am I missing something? Thanks.

I've set up my new OPi Zero as a wireless AP running the latest Armbian build for the OPi0. It's working mostly great. My one problem I'm having is that my speeds seem to be throttled to 5-6Mbps. I connect wirelessly from my phone and run a speed test and get 5-6Mbps. If I connect directly to my router, I get 30Mbps. I have a Rpi3 set up about the same as the OPi0, and when I connect it up I get the full 30. Each time I've tested with the OPi and RPi, my phone is the only device connected. So, I've poked around online and I can't seem to figure out if it's a hardware limitation or if it's a software/driver/setting limitation. Also, if it's the latter, how/where to…

Hello to all I am using Debian Jessie 5.25 on OPi PC+. And using rpi-monitor for monitoring stuff. I already made a fully working webserver and moved my wordpress to it, CPU usage around 10-20% when taking traffic, so it works like a charm. Today i decided i will use it to download a few big files with wget command. At first i was trying to be smart and save it directly to an ntfs pendrive mounted at usb0. Result - 40% I/O wait CPU usage and limited transfer (maybe 20-30 KB/s). Yes, my pendrive is bad, but hey, not so much. So i cancelled wget and tried to download the same file into /var/ into my SD card (used as system disk). Well, transfer was ok (200kB/s ser…

I have OrangePi Zero and want to use it the following way: 1. OrangePi Zero is connected to internet via Wi-fi 2. on OrangePi's eth0 port is running DHCP server 3. I connect a computer to eth0 port on OrangePi, get IP address via DHCP and access to the internet So internet is provided to eth0 via wlan0. Now, I managed to install dnsmasq, and it is working. Basically my config (/etc/dnsmasq.conf) is: interface=eth0 listen-address=172.16.0.1 bind-interfaces addn-hosts=/etc/dnsmasq/hosts.conf dhcp-range=172.16.0.50,172.16.0.150,12h dhcp-leasefile=/var/lib/misc/dnsmasq.leases IP of eth0 on OrangePi Zero is: ifconfig eth0 …

I bought a 7inch HDMI LCD (C) panel http://www.waveshare.com/7inch-HDMI-LCD-C.htm and trying to use it with Orange Pi One. All is right, but: 1. the image constantly flickers 2. when the brightness changes, a "ghost" of the old image appears I use power from PC power supply, yellow line, armbian image is Armbian_5.30_Orangepione_Ubuntu_xenial_default_3.4.113_desktop Can I do something with my configs, or this panel is a piece of shit? My fex: [boot_disp] advert_disp = 0 auto_hpd = 1 output_type = 4 hdmi_channel = 0 hdmi_mode = 4 cvbs_channel = 1 cvbs_mode = 11 output_full = 1 hdmi_mode_check = 1 screen0_out_c…

Hi, Many thanks for your support. I installed successfully the OpenMediaVault (OMV) ISO Image on the new Orange Pi Zero Plus (OPI0+): OMV_3_0_91_Orangepizeroplus_4.13.13.img.xz. I mounted an external USB 2.0 HDD. via OMV The OPI0+ is directly connected thru LAN cable to the router (Fritz!Box 7490). Login via PuTTY ssh works also fine. Additionally, I installed miniDLNA and configured folder/file sharing and media streaming. The flac-files are provided quickly, including album cover pictures (jpg). Now, I kindly ask for your support to disable Wi-Fi (WLAN). I thought about blacklisting the module 'cfg80211', but …

If I open the image file for NanoPi NEO, I don't see the FAT32 boot partition. > fdisk -l Armbian_5.38_Nanopineo_Ubuntu_xenial_next_4.14.14.img Medium Armbian_5.38_Nanopineo_Ubuntu_xenial_next_4.14.14.img: 1,4 GiB, 1488977920 Bytes, 2908160 Sektoren Einheiten: sectors von 1 * 512 = 512 Bytes Sektorengröße (logisch/physisch): 512 Bytes / 512 Bytes I/O Größe (minimal/optimal): 512 Bytes / 512 Bytes Typ der Medienbezeichnung: dos Medienkennung: 0xbcf97591 Gerät Boot Start Ende Sektoren Größe Id Typ Armbian_5.38_Nanopineo_Ubuntu_xenial_next_4.14.14.img1 8192 2908159 2899968 1,4G 83 Linux If I flash…

Hi: when iI'm using gpio of orangepi zero+, I found gpio is not usable, I can't find any way to let it work,please help me ! the device of gpio is: gpiochip0 -> ../../devices/platform/soc/1c20800.pinctrl/gpio/gpiochip0/ lrwxrwxrwx 1 root root 0 Jan 1 1970 gpiochip352 -> ../../devices/platform/soc/1f02c00.pinctrl/gpio/gpiochip352/ but the Orangepi Zero's gpio is : gpiochip0 -> ../../devices/platform/soc/sunxi-gpio.pinctrl/gpio/gpiochip0/ is it the reason? how to let the gpio device work? please help me!

Hi enthusiast, Last few year I used Armbian 5.25, which allow me to echo cpufreq into /sys/devices/system/cpu/cpu0/cpufreq/scaling_***_freq to choose the overclock freq. However, last week, I had to disconnect the power and the Banana Pi didn't boot again. So I decided to install a fresh updated version of Armbian, which is called Bionic. The /proc/version shows: Linux version 4.19.62-sunxi (root@armbian.com) (gcc version 7.4.1 20181213 [linaro-7.4-2019.02 revision 56ec6f6b99cc167ff0c2f8e1a2eed33b1edc85d4] (Linaro GCC 7.4-2019.02)) #5.92 SMP Wed Jul 31 22:07:23 CEST 2019 But now, when I want to overclock by using the method above, it won't al…

I have an OPZ+ server with Armbian buster that has the following information cat /etc/armbian-release # PLEASE DO NOT EDIT THIS FILE BOARD=orangepizeroplus BOARD_NAME="Orange Pi Zero Plus" BOARDFAMILY=sun50iw2 BUILD_REPOSITORY_URL=https://github.com/armbian/build BUILD_REPOSITORY_COMMIT=c865c065-dirty VERSION=5.91 LINUXFAMILY=sunxi64 BRANCH=next ARCH=arm64 IMAGE_TYPE=stable BOARD_TYPE=conf INITRD_ARCH=arm64 KERNEL_IMAGE_TYPE=Image lsb_release -a No LSB modules are available. Distributor ID: Debian Description: Debian GNU/Linux 10 (buster) Release: 10 Codename: buster uname -a Linux orangepizeroplus 4.19.63-sunxi64 #5.92 SMP Fri Aug 2 00:18:2…

I'm trying to flash the armbian image onto my orange pi zero 3 but it doesn't boot, no red or green light, I've tried both images (jammy and bookworm) but no success, I'm using Balena Etcher to flash the images.

@ag123, @c0rnelius, and anyone else that has interest in sound on these devices. I have been able to put together a patch that enables audio for H161/H618 devices. So far only audio on HDMI works. Analog audio is still generating an error on startup. The patches were taken from a git repository by warpme: https://github.com/warpme/minimyth2/tree/master/script/kernel/linux-6.6/files , and probably came from the Zunlong SDK. A lot of the code was written by Allwinner. @pixdrift generated a version of the patches for Armbian and I continued to work on them. I have a git repository if anyone would like to test, partic…

Hi, I've installed Debian Wheezy with 4.0.5 kernel on my BPI and connected an 1To hd with sata. When i try to mount it, i get : "mount: wrong fs type, bad option, bad superblock on /dev/sda1, missing codepage or helper program" I can mount it on my other server ubuntu 14.04 LTS with no error. Do you have an idea why i can not mount it on BPI ? Maybe it's due to the Guid Partition Table ? Tks Nerek

Just "ln -sf interfaces.r1router interfaces" ? Should I install a dchp server?

Can any one port the driver for ms5611 from kernel4.x to 3.4.39? I am using the sensor on olimex a20 micro 4Gb. I need it to use it in Android. I am willing to pay for porting.

Hello, I'm a new user of Orange Pi One - it just arrived yesterday. I installed Armbian and hoped to try out some H264 video. It appeared just fine on the first time - but I noticed lack of any OSD/subtitles. I tried to use different player (VLC), played with different video outputs. 'X11' worked well on both VLC and mpv... until I tried fullscreen. After long time spent researching the topic I found out that Armbian is using libvdpau-surni whitch is a community driver reversed-engeineered from Allwinner's commertial one, apparently avalibale for Android. I also read that its output will alvays overlap any other elements of the screen including subtitles, menus et…

I am using legacy Armbian_5.14_Orangepi2_Ubuntu_xenial_3.4.112.7z and a Logitech C110 and I cannot set some params. However I can set this in my PC under x86_64 3.13.0-91-generic. Below is the output of v4l2-ctl in orangepi2. Any idea? $ v4l2-ctl -l --verbose VIDIOC_QUERYCAP: ok error 22 getting ctrl Brightness error 22 getting ctrl Contrast error 22 getting ctrl Saturation error 22 getting ctrl Hue error 22 getting ctrl White Balance Temperature, Auto error 22 getting ctrl Gamma error 22 getting ctrl Power Line Frequency error 22 getting ctrl White Balance Temperature error 22 getting ctrl Sharpness error 22 getting ctrl Backlight Compensation …

I'm not sure if this is off-topic, but I'd like to ask the forum about a problem. My goal is to run RPi-Cam-Web-Interface (http://elinux.org/RPi-Cam-Web-Interface). I have 5.20 Jessie server 3.4.112 that has been updated/upgraded on an Orange Pi One with a gc2035 cam on an expansion board from aliexpress. As a first step I got the cam working. There are some threads in this forum that made that easy. I then installed github.com/roberttidey/userland since it includes raspimjpeg - a key element in the RPi-Cam-Web-Interface toolchain. But when I run raspimjeg I get the error * failed to open vchiq instance Google has solutions that involve permissions…

Hello all, just joined the forum since this is my first time using Armbian. So I got a NanoPi M1 and the dvp cam500b. From what I understand this camera uses the omnivision ov5640. I am having trouble getting this thing recognized in armbian. I get /dev/video0 to be listed by adding it to /etc/modules, but if I go to access it with any software it reports back 'no such device' or to the similar effect (this includes mjpg-streamer, fswebcam, ffmpeg). Researching around I find many forum posts of people saying one must modify the 'fex' file... to which I found out this is the decompiled version of the /boot/script.bin file using the sunxi-tools/bin2fex. Thing is, wh…

Hi, I have nanopi neo air and want to use Ethernet over USB (micro USB on the board). I configured CDC_Ethernet and RNDIS on kernel's(Debian Jessie) USB gadget section. With ifconfig, usb0 is in the list and with dmesg, it seems g_ether has been configured and it is ready but noting happens on windows nor Linux to show any active network connection or even usb connection on device manager... Please help how can i use usb to have ethernet ... BR, Masoud

Hello , I have a Adafruit TFP401 HDMI/DVI converter module. On my orange pi pc plus with Armbian kernel 3.4.113, i changed resolution to 800x480 on script.bin file and screen doesn't fit, it has margin from left. anyone help me ? Module https://learn.adafruit.com/adafruit-tfp401-hdmi-slash-dvi-decoder-to-40-pin-ttl-display/overview Screenshot http://hizliresim.com/yEAaoy

The lighttpd fails when installed on following two distros: (1) Armbian_5.25_Orangepipc_Debian_jessie_default_3.4.113 (2) Armbian_5.25_Orangepipc_Ubuntu_xenial_default_3.4.113_desktop How to solve this problem? The code below gives the details. Welcome to ARMBIAN 5.25 stable Debian GNU/Linux 8 (jessie) 3.4.113-sun8i pi@orangepipc:~$ uname -a Linux orangepipc 3.4.113-sun8i #10 SMP PREEMPT Thu Feb 23 19:55:00 CET 2017 armv7l GNU/Linux pi@orangepipc:~$ sudo apt-get update pi@orangepipc:~$ sudo apt-get install lighttpd pi@orangepipc:~$ sudo systemctl restart lighttpd pi@orangepipc:~$ sudo systemctl status lighttpd -l ● lighttpd.service …

So first I'm new using armbian on Opi PC. I'm trying using my Opi like a mediaserver on my TV. I install Kodi and everything is ok. I'm now trying to fix some Audio problem. When I watch e video on Youtube, some of them have e perfect sound, some of them have a lot of interferences, so mutch that I can't hear anymore anything of the video. I already configure asound.conf with the card I'm using, i tried already using only HDMI for video and audio or to separate HDMI only for video and 3.5 jack for audio. Both solutions are giving me the same problem. I install every codec I found, also the vlc complete with the browser-plugin, but no way. I t…

Hi. I configured OrangePi zero with the NAS interface and with Openmediavault. I also configured ethernet card and wifi. Everything works. But if I disconnect the network cable, I also disconnect the wifi. Now I would like the wifi to work even without ethernet cable. This is possible? Many thanks ps. this the version of software ARMBIAN 5.31 stable Debian GNU/Linux 8 (jessie) 3.4.113-sun8i

Is there any option to change the boot screen of the armbian in orange pi, during startup. And i also want hide the boot text during shutdown. I m new to armbian and orange pi I m using orange pi pc plus 2E. Can anyone help me please. Thanks in advance.

Hello friends! I Am using 3G modem(Huawei E171 connected by OTG cable) on my OPi One for internet, but one problem - modem after few days working freeze. Reboot don't help because not full power off on USB, and after reboot i don't see modem in /dev. Only after physical remove modem and install again it's initialized and work fine. Question: Can i power off USB from cli? # uname -a Linux orangepione 3.4.113-sun8i #18 SMP PREEMPT Thu Jun 15 02:16:06 CEST 2017 armv7l armv7l armv7l GNU/Linu # lsusb Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 00…

EDIT - UPDATE 'apt-get upgrade' worked fine - thanks to all armbian developers and contributors! --- Hi, Should I wait for 'apt-get upgrade'? ... never change a running system ;-) Due to Ethernet Port (LAN) related issues that effect OPI0+ to the newest Armbian release - under development (Now it seems that the OPi Zero Plus is missing his Ethernet-device ...). My OPI0+ is only connected via LAN cable to the router. And I don't like to use Wi-Fi (WLAN). Regards, Jochem

I tried to build the armbian on my Orange Pi Zero Plus 2 to work on my astro project. I'm planning to connect the board to the camera module, which I'd assemble with a small scope (120mm focal length), and with a small TFT screen to make it a electronic finder scope. When I build and install the stretch server I've encounter several instability. There were some random crashes and finally I was able to get it stable. I'd like to share it here in case anyone is encountering the same. Here's the info: First I was experiencing random crashes and the exception message shows there's a problem at the high resolution timer. I simply disable the hr timer …

Hello guys. I try to configure AP on WiFi. I have created /etc/hostapd/hostapd.conf: interface=wlan0 driver=nl80211 country_code=IN ssid=TEST hw_mode=g channel=6 wpa=2 wpa_passphrase=12345678 wpa_key_mgmt=WPA-PSK wpa_pairwise=TKIP rsn_pairwise=CCMP auth_algs=1 macaddr_acl=0 Then I have uncommented DAEMON_CONF="/etc/hostapd/hostapd.conf" in /etc/default/hostapd. After it, I run /etc/init.d/hostapd restart And I try to scan WiFi via mobile phone, and no TEST. What am I doing wrong?

Hi Guyzz Just got a OPI1 (H3 512MB), and was trying out the stretch image from here https://www.armbian.com/orange-pi-one/ https://dl.armbian.com/orangepione/Debian_stretch_next.7z It won't boot It starts up , w. both Orange & Green leds on lan , then i can see it requests a dhcp address , and it gets one (req/offer runs many times), then nothing happens after that. Just - Green light blinks on lan , Orange is unlit. I tried to write (linux dd) it on 2 different SD-cards , a 8GB Intenso , and also a 16GB Sandisk - same behaviour. I grabbed the latest Jessie from the archive , and wrote it to the Intenso 8GB , and it booted fine w. jessie. I don't mind…

Hi Guys, Sorry if this question has been tabled before, but i couldn't see it amongst the H5 topics. I just bought two O-pi-zero+ and downloaded the two mainline releases from https://www.armbian.com/orange-pi-zero-plus: Armbian_5.38_Orangepizeroplus_Ubuntu_xenial_next_4.14.14.img and Armbian_5.38_Orangepizeroplus_Debian_stretch_next_4.14.14.img both seem to work just fine until i try to disable any of the CPUs, for example: "echo 0 >/sys/devices/system/cpu/cpu3/online". i'm logged on using ssh and after this i get no response. this happens on both xenial and stretch, and on both boards. i haven't tried connecting to the uart yet, but i just wo…

I am using legacy kernel 3.4.113 with Nano-PI NEO/AIR. Up until recently every thing is fine. With NEO/AIR new boards nand-sata-install script is failing with "There is no targets". Unfortunately it is lot of work to upgrade the kernel to mainline at this stage. I greatly appreciate if anyone share the steps to fix this issue for this kernel.

Hello everyone. I'm new to Armbian. If I do not restart or turn off by command (correctly) all the files generated or transferred since it was turned on are deleted immediately. Why? Is it normal in Armbian? I use Orange Pi Win Plus 2, how do I deactivate that functionality? I use it as a remote server.

I'm trying to add concurrent mode to the wifi driver on an Orange Pi PC Plus running the latest stable distribution of Armbian, but running into an "invalid module format" error due to the kernel version not matching the source version I'm using to recompile the wifi driver. I installed both the source and header files from armbian-config. The kernel version is 4.19.59 according to uname -r. This apparently is the linux-image-next-sunxi image, according to `apt-cache search linux-image | grep 4.19.59`. However, the source for the next-sunxi branch in the repository is 4.19.57, not 4.19.59, as `apt-cache search linux-source | grep next-sunxi` gives: linu…

I didn't see support specifically for NanoPi NEO-LTS https://www.friendlyarm.com/index.php?route=product/product&product_id=132 Does one of the other images work on this particular board?

Hi to everyone, I configured Network Manager to have a local-link connection (eth0-ll) as DHCP fallback (eth0-auto). When I do the following: Connect Orange Pi in a net without DHCP, obtaining a local link address Unplug ethernet cable Plug another ethernet cable connected to a network with DHCP If step 2 and step 3 are executed rapidly, the Orange Pi doesn't detect the network switching and eth0 keeps its local-link address. When I perform such steps slowly, Orange Pi detect which ethernet cable is not plugged in and then everything works as expected. How can I increase the refresh rate of …

hello, there is no option to install in flash, Install/Update the bootloader on SPI Flash im using olimex a20 lime with emmc Armbian 23.8.1 Jammy with Linux 6.1.47-current-sunxi verbosity=1 bootlogo=false console=both disp_mode=1920x1080p60 overlay_prefix=sun7i-a20 rootdev=UUID=6a1af220-c7aa-449a-b709-c3eb897ae28a rootfstype=ext4 overlays=mmc2 pwm spi-add-cs1 spi-jedec-nor spi-spidev param_spinor_spi_bus=0 #param_spinor_spi_cs=1 param_spidev_spi_bus=2 usbstoragequirks=0x2537:0x1066:u,0x2537:0x1068:u im using like that but it dont boot if i remove sd lsblk NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINTS mmcblk0 179:0 0 …

My Armbian paste is at https://paste.armbian.com/yamakinoce This is an OrangePi Zero Plus, with an H3, not an H5 or an H2. I see all kinds of problems here but don't know how to fix them. It seems the DTB is just wrong for this board. For one, there are interrupts showing up in /proc/interrupts for HDMI and LCD, but this physical board has *neither* of those. It has an Ethernet PHY but neither the kernel nor uboot see it. It also has a Wifi but the kernel does not see that either. Does a correct DTB exist for this board? What is its name? I vaguely remember a couple ways to force the kernel and uboot to use a different DTB …

Hi, just a quick question: Why is OTG disabled? I read some "performance issues" or "high CPU usage by OTG" etc... But can someone be more specific?

Hi , my op one board is installed latest armbian but i couldnt see serail ports The default serial port /dev/ttyS0, used for (bootstrap) debugging and the serial console, is located at J11 - refer to the picture and instructions below. The Raspberry's "original" serial port on GPIO 14 and 15 (CON3, pins 8 and 10) can usually be accessed as /dev/ttyS2 on the Orange Pi Plus. J12 also provides another serial port on pins 4 (RX) and 6 (TX), which should map to /dev/ttyS3. only i see /dev/ttyS0 and /dev/ttyGS0--GS4 how can i fix this issue ?

Hi, I've tried to finally move on from 5.04, but the new image doesn't boot. At least, HDMI doesn't show anything and my router doesn't see the board when connected via ethernet. On the first power-on the green led glows a few minutes, then red one blinks a few times alone, then both leds blink and then only green one glows. On successive boots only green led glows uninterruptedly. Do you need any information to make it work? BTW, legacy kernel worked fine for me, except my HDD connected with hdd-usb adapter (Agestar 3FBCP1) spits errors every few seconds and performance is unbearable. Connected to my router with TomatoUSB the same hdd works fine. I hoped n…

Hi everybody. I'm stuck on working touchscreen with banana pro running vanilla jessie desktop. My touchscreen has goodix controller that supported mainline kernel. But when i install goodix driver module, an error that saying "request IRQ failed" show up in dmesg. I think i need to inform module for right interrup and reset pins connected board, but how? i'm connected int pin of touchscreen panel to pin7 that labeled "io1" on board. Please help me. links: goodix driver source, banana pro pin definition schema

Hi all, Somebody has any problem with NanoPI NEO using g_hid as keyboard ? I'm using the code below to send the keyboard report to /dev/hidg0, but the it throws an error. https://www.kernel.org/doc/Documentation/usb/gadget_hid.txt NanoPi NEO - Linux 3.4.113-sun8i jessie [ 373.427509] g_hid gadget: adding config #1 'HID Gadget'/bf064548 [ 373.427678] g_hid gadget: adding 'hid'/c527075c to config 'HID Gadget'/bf064548 [ 373.427782] gadget_is_softwinner_otg is not -int [ 373.427837] gadget_is_softwinner_otg is not -int [ 373.427881] gadget_is_softwinner_otg is not -int [ 373.427932] gadget_is_softwinner_otg is not -int [ 373.429424] g_hid gadget: cfg 1/bf064548 s…

Hi everybody, I'm trying to build an owncloud server with my Cubieboard2 dual card, using a Debian Jessie based rom. I download both the Vanilla and legacy versions, but when I put them on the SD.. the system does not boot! The official images hosted on sunxi servers are different between the "normal" version (with NAND) and mine (with two sd slots, 1 for boot and 1 for data, but no NAND). It could be this the problem? I'm also trying to start with a clean debian installation trhough official installer for armhf but no success. Thanks a lot and have a great end of the year!

Hi there I wanted to ask if anybody got HDMI-CEC to work with their Orange Pi Lite. The data sheet says its supported, but I can't get it to work with Armbian. What I tried till now is installing cec-utils with all dependencies and running "cec-client -l", hoping it would work out-of-the-box: root@orangepilite:~# cec-client -l Found devices: NONE Tried different cables and HDMI Ports. CEC is enabled in the TV (Samsung). After a bit of googling (and trying some stuff applying to the RPi) I am now thinking that maybe the kernel hasn't got CEC support compiled in...? root@orangepilite:~# uname -a Linux orangepilite 3.4.112-sun8i #10 SMP PREEMPT Sun Oct 23 16:…

Hi, I am using ARMBIAN 5.25 stable Ubuntu 16.04.2 LTS 3.4.113-sun8i on my Nanopi neo air. uname -a says Linux nanopiair 3.4.113-sun8i #10 SMP PREEMPT Thu Feb 23 19:55:00 CET 2017 armv7l armv7l armv7l GNU/Linux I think, since I made the last apt-get upgrade and rebooted, my bluetooth stopped working. lsmod gives: lsmod Module Size Used by bmp085 3487 0 pcf8591 3363 0 snd_usb_audio 80352 0 snd_hwdep 5562 1 snd_usb_audio snd_usbmidi_lib 17545 1 snd_usb_audio snd_rawmidi 17134 1 snd_usbmidi_lib gspca_ov534 9254 0 gspca_main 19688 1 gspca_ov…

I've download Armbian_5.25_Cubieboard2_Ubuntu_xenial_default_3.4.113_desktop (Ubuntu desktop – legacy kernel ) and copie with dd on a 32GB EVOSamsung sd-card. After boot until loading Kernel , the Loading crashd and the board goes off. What can i do? best regards mtpmoni

Hello everyone, My bananapi is running on the mainline kernel. When i try to poweroff the bananapi it reboot's but without it's networking services online. The bananapi is connected to a battery, but i do expect it to power off completely. I came across this topic but it is about a cubieboard running on the legacy kernel. Is there somebody who can help with this problem? Thanks in advance.

with hdmi figured out. Rather, he himself earned a normal. It could be seen that a reboot was needed. Therefore, I rename the topic Has anyone tried to use the Majordomo for Armbian? Have experience? I want to try using orange pi for a smart house

I tried to install default linux kernel (3.4.113) on Orange Pi PC + and It's keep on rebooting while displaying kernel panic on console. Below I have attached the log U-Boot 2017.11-armbian (Dec 18 2017 - 14:24:28 +0530) Allwinner Technology CPU: Allwinner H3 (SUN8I 1680) Model: Xunlong Orange Pi PC Plus DRAM: 1 GiB MMC: SUNXI SD/MMC: 0, SUNXI SD/MMC: 1 In: serial Out: serial Err: serial Net: phy interface0 eth0: ethernet@1c30000 starting USB... USB0: USB EHCI 1.00 USB1: USB OHCI 1.0 USB2: USB EHCI 1.00 USB3: USB OHCI 1.0 USB4: USB EHCI 1.00 USB5: USB OHCI 1.0 scan…

Hi. I encountered problem, glimpsed through topics and didn't found anything similar so I am posting this one now. Had set up OrangePi Zero 256MB version with Domoticz and everything looked great. I have 2 internet connections, one is PON FTTH and the other one is VDSL. So I have 2 routers with RJ45 and 2 WiFi networks at home. One for my personal usage (ftth, locked router by ISP, static IP but no port forwarding) and the other one is for all home users (dynamic IP but full access to router options). I hooked up OPI using cat5e cable to my router and this connection is working perfectly reliable. I had XR819 hooked up to VDSL router as auxiliary connection (and con…

Hello, i have cubieboard2. This board boots and runs successfully with Armbian-5.xx-Cubieboard-Debian(Ubuntu)-xx-4.xx.xx image, but i have NO success to boot and run any Armbian_5.xx_Cubieboard2_Ubuntu_xenial_default_3.4.xxx_desktop.img image. Except, that i was able to boot and run Armbian_5.38_Cubieboard2_Ubuntu_xenial_default_3.4.113 image once and it worked for few hours, i was able to install some SW. After power up in the morning cb2 boots until kernel starts, show some flickering colorfull screen and in a second red power led is off and board is not showing any progress. HDMI display says no signal. Maybe someone has the same problem ? So to make it s…

For a new project with multiple socs, I want to use the NanoPi Neo 2 with the Allwinner H5 soc and boot from DHCP / NFS. I've done the same in the past for a setup with Raspberry Pi's, but the Allwinner socs require a different approach. What would be the best way to achive this? - FEL? - SD or USB with U-Boot? - any other suggestions?

with great joy we saw the new version of Armbian_5.69_Orangepipcplus_Ubuntu_bionic_next_4.19.13 for orange pi pc plus (date 9-1-2019) We were waiting for a WIFI fix, on the WPA. Wifi at the very beginning, it works properly with a WPA connection. Then, you do not want to make another WPA connection and work. Will this problem be corrected in some new version of Armbian? Thanks

Hello, I'm new to the Pi computers and all that, and I'm planning on doing a project, so I was wondering if the Opi One H3 would support packet injection and monitor mode on Armbian with the onboard wifi? Thanks in advance.

Hey all, I understand these things are in active development at the moment. I was attempting to use the usb 3.0 socket on the lite 2 with stretch, except it did not respond at all - looking at dmesg shows the following error: [ 1.806055] sun4i-usb-phy 5100400.phy: Couldn't get regulator usb0_vbus... Deferring probe [ 1.806320] sun50i-usb3-phy 5210000.phy: failed to get phy clock which from my limited experience with linux kernel seems to indicate that the device tree config may be incorrect for the board - as most searching for these errors show the code added as part of updates to get the pine64 board's usb 3.0 stack working. USB 2.0 sock…

Hello to all! I'm using orange Pi pc with Armbian Xenial desktop legacy kernel 3.4.113-sun8i and i'm not able to configure mpv to play correct .avi videos. Like suggest in some old posts if try vo=vdpau video works but immages are very distorted (big pixel and strange color), instead if i use vo=x11 immages are ok but video plays very slow. With vo=vx MPV dont start. Has been found a solution?

Hi Can I setup A64 cpu frequency in bananapiM64 (images taken from pine64 classic ) at 1150MHZ? Now is 1010Mhz. Armbian 19.11.3 Pine64 Bionic current kernel 5.3.9. I have solid fan and this frequency is low.

Hi, I'm want to use my old Nanopi Neo Air with CAM500B as wifi webcam. I flashed the latest armbian bionic image, installed v4l-utils and tried to list the cameras properties with `v4l2-compliance` and `v4l2-ctl --all` but the tools always crash and I can't kill them. `dmesg` shows a NULL pointer exception: [ 56.994526] 8<--- cut here --- [ 56.997657] Unable to handle kernel NULL pointer dereference at virtual address 00000068 [ 57.005825] pgd = c774af94 [ 57.008606] [00000068] *pgd=00000000 [ 57.012243] Internal error: Oops: 5 [#1] SMP THUMB2 [ 57.017122] Modules linked in: brcmfmac brcmutil sun8i_codec_analog sun8i_adda_pr_regmap su…

Hi, i am beginner in SBC other than Rapsberry Pi and i just got my NanoPi R1 with case. I try power the board without SD card for the first time and i see that friendlyWRT already installed but i would like to use a general OS. Since i can't download the official OS from friendlyelec, i saw that armbian is another way and might be better. I follow all step in quick start guide page, and can't even get my board boot up. Below is the list of OS that i try with SD card: - Armbian_22.11.1_Nanopi-r1_jammy_current_5.15.80_minimal - Armbian_22.11.1_Nanopi-r1_bullseye_current_5.15.80 - Armbian_22.11.1_Nanopi-r1_bullseye_current_5.15.8…

https://paste.armbian.com/faquvejaxo works ok for my alternate 2G4 network. Scanning wifi does not show any 5G8 networks. From dmesg: bananapim2plus:brcm:% dmesg |grep -i brcm [ 7.495253] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43430-sdio for chip BCM43430/1 [ 7.497405] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43430-sdio.sinovoip,bpi-m2-plus.bin failed with error -2 [ 7.497440] brcmfmac mmc1:0001:1: Falling back to sysfs fallback for: brcm/brcmfmac43430-sdio.sinovoip,bpi-m2-plus.bin [ 7.871128] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43430-sdio.sinovoip,bpi-m2-plus.txt faile…

Hello, I'm using USB C to Ethernet adapter and the download speed is below 1Mbps while upload speed as expected. I have 600Mbps down and 500Mbps up ISP plan but since the adapter used USB2.0 it should cap both down and up at ~90Mbps, at least I have tested this with a Galaxy Tab. Image: Armbian_community_24.8.0-trunk.399_Orangepizero2w_bookworm_current_6.6.36_minimal.img.xz Power supply: 5V2A SD: Sandisk Ultra 64GB Adapter (100Mbps): Speedtest: ip a 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 in…

I am getting a thermal zone failure message during boot, which has always happened with kernels after 6.6, at least as far as I know. Is this error actually harmful? HardWare:NanoPi NEO2 Armbian Version: Packages: Debian stable (bookworm) v25.2.3 for NanoPi Neo 2 running Armbian Linux 6.12.20-current-sunxi64 Support: DIY (community maintained) Kernel: Linux nanopineo2 6.12.20-current-sunxi64 #1 SMP Sat Mar 22 19:54:28 UTC 2025 aarch64 GNU/Linux dmesg output [ 7.018086] core: _opp_supported_by_regulators: OPP minuV: 1320000 maxuV: 1320000, not supported by regulator [ 7.018125] cpu cpu0: _opp_a…

Please give me a tip - what is purpose of /dev/mmcblk2boot block devices created? Quite small size - 4MB - ones, do they serve to something u-boot needs at boot time? There are no records for them in fstab so I assume they are created by zram, but what happens to them after boot when they aren't needed anymore? Board Orangepi 3LTS with bookworm minimal Also as a matter of wondering - why there are two zram devices: one of 1/2 of RAM (as usual) and another of quite small 50MB only, what is it for? root@heaven:~# fdisk -l <redacted> Disk /dev/mmcblk2boot0: 4 MiB, 4194304 bytes, 8192 sectors Units: sectors of 1 * 512 = 512 byt…

Please help. Hello everyone, please help me out. I urgently need to enable secure boot on my Allwinner H3 Nanopi neo core. I tried following the instructions from the forum https://forum.armbian.com/topic/3033-h3-soc-boot-rom-security-e-fuse/#findComment-84051 . But I couldn't burn the E-Fuse. At stage 5, when loading ./sunxi-fel -v -p write 0x2000 of the compiled code and checking whether the changes were applied, sunxi-fel sid/list/version doesn't work. I have to reboot the board, and then I see no result. Please help me solve this problem and burn it so that the bootloader signature is present and it is impossible to boot from the SD card using third-party means. Pleas…

@dear Igior and others My R1 fw1 run fine past 2 month with the 3.19.3. now its time to move to 4.0.x Igor - many thanks for KERNEL_CONFIGURE at your scripting implementing . This shortcut my work with automated rebuild kernel an bit -- but not fully. I have the need to been able to push my own kernel .config into your https://github.com/igorpecovnik/lib in an automated way. But how about to push an custom .config into that? welll ... My suggestion are here top add i.e at your compile.sh : KERNEL_CUSTOM_CONFIG="/path/file" if file env set , use it instead from default patched kernel .config How you think about this Idea ?

Hi friends! Here is the situation. Trying the armbian jessie 3.4.109 and 4.2.3. When installing a new soft it takes to much time. For example, when running apt-get upgrade after fresh image install, it takes about 17 minutes. Of course it contain the core update. But that upgrade part on jessie takes about 7min, on wheezy about 3min. The same thing when just install some software, like apache2 or mc. It takes to much time (for mc it takes about 1 min on jessie, about 30sec on wheezy). The same with reloading. It takes about 1min. Situation is the same on both jessie 3.4.109 and 4.2.3 Tried the same with Banana PI. The same thing. I use the fastest SD card. …

Hello, I just installed Vanilla jessie desktop on SD for cubietruck, it boots well to the desktop but I cannot use usb mouse neither the usb keyboard. WHen it boots it says starting USB... USB0: USB EHCI 1.00 ... scanning bus 0 for devices... 1 USB Device(s) found scanning bus 2 for devices... 1 USB Device(s) found then boots normally to desktop. Is there a pacakge to install? Thanks.

Hi. I've installed Xenian Server on cubieboard1. Host connected to LAN/Internet. I can do apt-get update/install, but I cannot ping the host inside LAN (time out). May be the reason any fw rules on clean system?

I'm trying to get an nrf24l01 radio to work on my Orange Pi One but have not been successful. I'll document what I've done here. If you spot an error, please let me know. Start with fresh Armbian_5.20_Orangepione_Debian_jessie_3.4.112 image. Then apt-date update and apt-get upgrade. Attached nrf24l01 like this (pictures of header and radio are attached for verification); nrf24l01 color opo pin opo fn 1 GND blk 25 ground 2 VCC red 17 3v3 3 CE org 29 PA7 4 CSN ylw 24 CS0 (SPI-CE0) 5 SCK grn 23 SCLK 6 MOSI blu 19 MOSI 7 MISO mag 21 MISO 8 IRQ n/c git …

Hello! How are you? I have OPI PC PLUS running ubuntu xenial desktop. I want to use it how pc / thin client. Is it possible OPI runs youtube videos? I tried run youtube from Firefox and Chromium but without good quality. After reads some opi foruns, seem possible run videos with Kodi or Openelec. I did install kodi: sudo apt-get install kodi The instalation is ok, but when I try run Kodi, it does not works, give me only errors. I read too that Openelec can be good than Kodi in OPI. I need to install some media player service that runs together ubuntu xenial and not only how OPI station media player because I want work OPI how pc station. I can not …

Does anybody got the SPI Bus working on cubietruck. I have a /dev/spi32764 device (for SPI2) after changing dts/dtb file. but ioctl always returns -1. Same test program worked with legacy kernel. Is there anything else todo?

I would use the opi as ir transmitter for AC. Does anybody know if it is possible? Thanks

I know this is a well known topic but since I didn't find an issue like the one I'm having I felt the need of explaining it. I recently bought an Orange Pi Zero board + extension board with AV, micro and 2 additional USB + case. During the 3 days I've been testing it I've been having a lot of issues related maybe to the heat (or maybe not). I have built a streaming media server called Mopidy, which is pretty cool but at certain times it completely hangs when I'm reproducing audio (by the way, I'm using only stable Debian / Ubuntu because kernel 4.11 isn't detecting the soundcard for some reason). It sometimes takes 1 hour to get stuck, …

Hey all, I'm using U-boot 2017-09 and Kernel 4.13. I'm looking for a way to disable the board auto start. I'm explaining. When you plug the power in, the board start by itself and U-boot does the rest. I would like to disable this feature in order to be able to plug in the power, charge the battery if needed and start the board with the regular push button. Is there any tweak to be done in the Device Tree ? Thanks Florian

Hi every one I installed armbian on my orange pi win plus. I want to use all uarts. uart1, uart2 and uart3. uart2 is enabled by default but the others are not. I add "overlays= uart1 uart2 uart3" in armbianEnv.txt but they don't work. Additionally, there is not /alwinner/overlays directory in /boot/dtb. And there are ttyS0, ttyS1,ttyS2 and ttyS3 in /dev directory.. So..How can I enable the other uarts? thank you

Old post below, here is what I found out thanks to some help from linux-sunxi IRC, I think this is a bug in the ondemand governor When using ASIX AX88772B USB to ethernet adapter and the cpu-governor is on ondemand, transfer speed is very slow. If governor is set to conservative or performance (yes that's right) speed is ok, 50 Mbit at least. So the problem has nothing to do with cpu speed as such (it's working @ steady 480Mhz and @ steady 1200Mhz) for now I'll stick with conservative as I don't want my board to burn up, but It would be nice if someone could take a look at that ondemand governor. Additional info: …

I have just flashed the Armbian Stretch mainline kernel 4.14.y. While booting, connected to a HDMI TV/monitor, I can see the start-up text lines initializing various things and at some point (I think it is "starting kernel"), the display gets heavily corrupted with horizontal lines then it switches to a blank screen. The TV displays that it's a 1080p60Hz mode (should be compatible with the display). Any ideas? https://youtu.be/n4-TSFzBgO4

while creating an ISO on SD: Etcher says :: it looks like this is not a bootable image; the image does not appear to contain a partition table and mitht not be recognized or bootable by your device well - this makes me wonder. btw: first time i write to sd-cards. in earlier times i had to write images to DVD it looks like this is not a bootable image; the image does not appear to contain a partition table and mitht not be recognized or bootable by your device Exactly which file did you try to write? Was it one of the standard Raspbian downloads from https://www.raspberrypi.org/downloads/raspbian/? see the ressources i have chosen …

Hello, I'm running a OPI Lite with debian jessie, All works fine until i have to reboot, and that happens quiet often while testing software. AFTER the boot i'm not able to reach the OPI via SSH, because the eth0 is activated ...and has a 169.x.x.x ip adress... On the OPI Lite i can ONLY discover WIFI and no eth0 connector...So i go into the "nmtui" tool and "disactivate" the eth0... Than i have access again via the wifi to my OPI lite. How can i completely disable the eth0, that only WIFI connects to my network? I didn't find about this behavior on the web, anyone else have that problem? Kind regards from Hans F4VSJ

i did some experiments today, i tested 2 Orange pi with the same image debian buster in the lastest version. i put a script on both that reported the execution time of a function and the date, one is running smoothy, the other crashes the orange, the bottom is the log what caught exactly at the time it caught, could someone help me understand it? Mar 19 09:25:01 localhost CRON[1657]: (root) CMD (command -v debian-sa1 > /dev/null && debian-sa1 1 1) Mar 19 09:30:01 localhost CRON[1702]: (root) CMD (/usr/lib/armbian/armbian-truncate-logs) Mar 19 09:31:52 localhost systemd[1]: Stopped target Timers. Mar 19 09:31:52 localhost systemd[1]: Stopped Message of the D…

Hi, We are using an Orange PC Plus with Armbian Orange Buster OS. Connected to the 40-pin header is Pi-Supply LoRa Node pHAT. We are having trouble commumicating with the LoRa module. We occasionally can get partial messages. The OS reports no errors with the UART. Any suggestions? Thanks frank

Hi, i use orangepi lite with armbian buster and kernel 5.4.35 my journal flooding with messages: May 02 09:50:11 orali kernel: RTL871X: CurIGValue=31, EntryMinUndecoratedSmoothedPWDB = 30 May 02 09:50:13 orali kernel: RTL871X: CurIGValue=31, EntryMinUndecoratedSmoothedPWDB = 31 May 02 09:50:15 orali kernel: RTL871X: CurIGValue=31, EntryMinUndecoratedSmoothedPWDB = 32 May 02 09:50:17 orali kernel: RTL871X: adaptive_early_32k(): bcn_cnt = 101 May 02 09:50:17 orali kernel: RTL871X: CurIGValue=31, EntryMinUndecoratedSmoothedPWDB = 31 May 02 09:50:19 orali kernel: RTL871X: CurIGValue=31, EntryMinUndecoratedSmoothedPWDB = 32 May 02 09:50:21 orali kern…

Ran the following command on my Banana PI to move to the HDD (SATA) nand-sata-install Install was a success: However I think some stuff went wrong during the transfer. Whenever I open a file in nano I get the following error: Error in /etc/nanorc on line 260: Error expanding /usr/share/nano/*.nanorc: Inappropriate ioctl for device I cannot run apt-get update anymore: pi@bananapi:~$ sudo apt-get update && sudo apt-get upgrade Hit:1 http://security.debian.org buster/updates InRelease Hit:2 http://deb.debian.org/debian buster InRelease Hit:3 http://deb.debian.org/debian buster-updates InRelease Hit:…

dear igor .. see #63 https://github.com/igorpecovnik/lib/issues/63

Hi again, I've a strange problem again. I've several Lime2 and tested them with USB-Sticks, works fine. Now I got a Fan-Tec case (USB 3.0 DB-ALU3-6G) containing a 4TB-SATA from a customer. As soon as I plug the disk into one of the USB-Plugs of a lime2, I got a kernel panic: Message from syslogd@localhost at Oct 19 17:49:20 ... kernel:[ 460.550693] Internal error: Oops: 17 [#1] PREEMPT SMP ARM Message from syslogd@localhost at Oct 19 17:49:20 ... kernel:[ 461.304238] Process kworker/u:1 (pid: 55, stack limit = 0xee9702f0) Message from syslogd@localhost at Oct 19 17:49:20 ... kernel:[ 461.314387] Stack: (0xee971d78 to 0xee972000) .... Some facts…

Hi All, I've installed Armbian Legacy Jessie onto Cubieboard 1 A10. currently it's running from SD. Connected with USB OTG cable to my Win PC. It's powered via the OTG port. I'm trying to enable USB mass storage with no success. modprobe g_mass_storage file=/dev/mmcblk0p1 removable=y Here's the log: [ 1155.371894] g_mass_storage gadget: Mass Storage Function, version: 2009/09/11 [ 1155.376004] g_mass_storage gadget: Number of LUNs=1 [ 1155.380105] lun0: LUN: removable file: /dev/mmcblk0p1 [ 1155.387175] ep_matches, wrn: endpoint already claimed, ep(0xc0a2fb14, 0xbf16d71c, ep1-bulk) [ 1155.393386] g_mass_storage gadget: Mass Storage Gadget, version: 2009/09…

Hi to All, I decided to start this new tread for searching of the best solution for unification of the boot process from any available media. Main target is Armbian next and development branches and mainline Kernel and U-Boot. Boot device can be eMMC, SD/MMC, USB Flash/HDD and SATA HDD/SSD probed in given order. In case of booting from eMMC, SD/MMC and USB Flash Read-Only Root FS can be used optionally. In case of booting from SD/MMC or USB Flash eMMC and / or SATA devices can be updated automatically. Some effort in this direction was done by me and described in Armbian Customization thread. The tests was done on Olimex' A20-Olimexino-Lime2-eMMC (HW rev. …

Hi, Sorry for the newbie question. Is it possible to configure Armbian/OrangePiZero such as it can bridge 2 wireless networks. i.e.: connecting to an existing SSID to gain access to the internet, and at the same time servicing as an access point using another SSID ? And.... how do I do that ? Thanks in advance, Richard

Hi, I cannot find how to install PHP7 on my OrangePiPC 3.4.113-sun8i I installed apache and mariadb by "apt-get install apache2 mariadb-server mariadb-client mariadb.common" but how do I install PHP7? thanX advance, Antonios

I would install mate on orange pi pc more starting from the server version. someone tell me step by step how to do. Thank you.

Hi all, first i want to thank all of you for this great software. Problem: No ethernet on mainline 4.11 kernel. I tracked the problem down to a 'ethernet status = "disabled"' in the dtb for the orange pi zero. How to fix it? I have only very little experience with Device tree. 4.11 is ok for the other OPs, i tested the OP One. Kind regards svollmar

Hello I have an issue with my wifi, it's not reliable. There is no problem with my laptop, or any other devices on my network, but my NanoPi Neo is disconneted after a few hours. It can stay alive for an half a day, and after it become unreachable. As I have no other connection to my NanoPi it's a bit hard to establish what appens. But if I unplug the USB Wifi dungle, and replugged it the link come back. Doing a ping to the NanoPi, I see regular "Request timeout for icmp_seq" - every 20, 50 or 100 request, it depends - and sometime the request time is abnormally huge: serveral seconds. The config has bee done with nmtui, the…

NanoPi NEO2 Debian jessie 4.11.1-sun50iw2 mount.cifs doesn't load if iocharset=utf8

I have tried to run the h3consumption monitor program (https://github.com/armbian/build/blob/master/packages/bsp/h3consumption) in an up to date Armbian 5.38 stable Debian Stretch 4.14.14 on a PiOne. After the command 'sudo h3consumption -h' and other commands it gives 'This tool requires legacy kernel on H3 devices. Exiting.' Is there any solution for this? Can I change the 3.4.*) to 3.4.*|4.14.*) in the script without any problems? https://github.com/armbian/build/blob/180112d72d31ec3629896f272a1d59ef3d83dc8d/packages/bsp/h3consumption#L123 # check platform and kernel case $(uname -r) in 3.4.*) HARDWARE=$(awk '/Hardw…