Allwinner sunxi

hello , I have Opi lite 2 I want to use it as low load server with minimal power consumption (min temp) I edited /etc/default/cpufrequtils like that min_speed=120000 max_speed=480000 governor=ondemand but it works on 888mhz constantly with load and without load (image 2) Ps: I have also OPi PC+ and edit of cpufrequtils works ok on it (image 1) what am I do wrong, or maybe armbian-config monitor doesn't work properly ? ARMBIAN 5.67.181202 nightly Ubuntu 18.04.1 LTS 4.19.4-sunxi64

I'm willing to dusto off my H3-based Orange PI+ 2, because of all the great work that has being done recently on kernel 4.20, 5.0, 5.1 etc to support both H3 and Mali 400/450. However, for some reason, it seems that my board (even though it's officially supported) hasn't been updated past 4.19 kernel, so all the cool things are missing. On the other hand there are some WIP/no-yet-supported Orange Pi boards that DO support 5.1 kernel, so I'm a little bit confused. Is there any roadmap for newer kernels on H3 boards?

On the Orange Pi Zero Plus the pwm1 port is available on the header instead of pwm0. Ik have tried to create a custom overlay but it does create a pwm device but it is not working. pwm1 is on PA6 I have created a folder: overlay-user in /boot In this folder I created a sun50i-h5-pwm1.dts file with the following content: /dts-v1/; /plugin/; / { compatible = "allwinner,sun50i-h5"; fragment@0 { target = <&pio>; __overlay__ { pwm1_pin: pwm1 { pins = "PA6"; function = "pwm1"; }…

Hi guys, I am new here. I bought a NanoPi Neo (H3). I am new to Armbian, but not new to Debian. The NanoHat OLED works fine with UbuntuCore 16.04 and kernel 4.14. Now I installed a new microSD card with latest Armbian Bullseye. But the NanoHat doesn't work. Armbian is up-to-date: uname -a Linux nanopineo 5.15.48-sunxi #22.05.3 SMP Wed Jun 22 07:35:10 UTC 2022 armv7l GNU/Linux cat /proc/cpuinfo processor : 0 model name : ARMv7 Processor rev 5 (v7l) BogoMIPS : 48.00 Features : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm CPU implementer : 0x41 CPU architecture: 7 CPU variant : 0x0 CPU part : 0xc…

Tried installing Armbian_23.11.1_Nanopineoplus2_jammy_current_6.1.63.img and it is super slow during first boot process regardless of SD type. Localization craps out with "Failed to set time zone: Transport endpoint is not connected". I boot with wired Ethernet and when I get to a prompt I can ping outside locations. apt update produces "Hash Sum mismatch" Anyways, doing my part testing legacy boards, hahahaha

Hi, sorry, I searched the forum but couldn't get any definitve answer to my questeion.... Is Video Decoding Hardware acceleration, CEC control and HDMI Audio Pass Through working on the OrangePiZero3 device? Thanks to its gigabit ethernet it would be the perfect replacement for my cheap amlogic Box which does only 4K25P due to hardware limitations..... Thanks for your input regarding this topic! Cheers Ford

hi all, i have a doubt about cubieboard3 and cubietruck 3.4.104-sunxi. Tipically use this board with network and SSH , but sometimes i need attach monitor VGA and sometimes monitor HDMI. Now work only VGA, HDMI never works. my /boot/cubietruck.fex is: [disp_init] disp_init_enable = 1 disp_mode = 0 screen0_output_type = 4 screen0_output_mode = 4 screen1_output_type = 0 screen1_output_mode = 4 fb0_width = 1024 fb0_height = 768 I can setup output cubietruck autosense? regards

Hello all, Where can I find the latest (and greatest?) version or Armbian. I think it is at the moment v5.24 . I looked at http://www.armbian.com/download/ and http://image.armbian.com/ . But no luck...? Is there another location? Or do I need to build from source? Thanks!

Hi, I would like to share an issue concerning the OPI Zero 2+ with the camera module. I was not able to work with it and I got usual error : [ISP] isp platform_id = 5! [CSI_ERR][GC2035]sensor_read err at sensor_detect! [CSI_ERR][GC2035]chip found is not an target chip. I finally found that the FEX was incorrect. On line 384, the port definition was wrong and should be PA08 : vip_dev0_power_en = port:PA08<1><default><default><default> Then the camera is recognized : [ 8652.370168] [ISP] isp platform_id = 5! [ 8652.447812] [CSI][GC2035]V4L2_IDENT_SENSOR=2035[CSI][GC2035]disalbe oe! And worked properly with f…

So far I was used to the Grub (and lilo) boot manager(s) but the Armbian 5.31 Bananapi Debian jessie next 4.11.5 image does some things differently. I have found the file /boot/armbianEnv.txt but none of the websites I found described what I should do with it. I tried to copy it to /etc but the changes did not take effect. I would like to remove the logo and have verbose boot messages. Could somebody help me to get there, please?

Hi guys , I am a newbie for armbian. I want to set my Orange Pi One as NAT server via USB connected to IPhone or Android Samsung . -------- Frist , I try to install Armbian_5.30_Orangepione_Ubuntu_xenial_default_3.4.113 Second, sudo apt-get install ipheth-utils Third, Connect to my iphone 5s via USB port and start my hotspot BUT I failed to set my phone as hotspot , I can't ping to www... I don't know what's wrong ? May any one give me a hand

Hi there, my BananaPi won't boot after a (maybe failed) apt-get update. Is there anything i could try to make it work again? While apt-get upgrade was running, I saw (iirc) in the log that the kernel directory (?) isn't empty (?). This message stayed there for quite a long time but the update process ended without any error messages. Thank you.

Well, the title is self explanatory. I am trying the new stable release for the Orange PI win from armbian (thank you guys!) but when booting for the first time in headless mode via SSH through Ethernet cable it gets stuck at "Enter new UNIX password". I put the new password and nothing happens. If I unplug the cable to force the SSH server to close the connection and then I plug it back again, the password is kept the old one (default 1234) and the problem repeats. After some tests I finally got to change the password, but it gets stuck after, or even before sometimes if I reboot. It seems that the SSH tunnel is simply not stable. I should mention that the configura…

With the Orange Pi One and the mainline kernel, I can't get it to work optimally when plugged into a gigabit switch. The eth interface on the Pi One is 100Mb/s and it works perfectly when attached to a switch that is 100Mb/s. When attached to a 1000Mb/s switch: [112776.347520] dwmac-sun8i 1c30000.ethernet eth0: Link is Up - 100Mbps/Full - flow control off When attached to a 100Mb/s switch: [112882.431555] dwmac-sun8i 1c30000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx

Just a quick question due to having just updated and rebooted my Cubietruck.... I was running 5.38 mainline Stretch, but I see that armbian-firmware 5.45 was installed over 5.38... so shouldn't the welcome screen now be saying "Welcome to ARMBIAN 5.45" instead of "Welcome to ARMBIAN 5.38" still? Or is that package not the one that determines the Armbian 'version'? Maybe a better question would be what would update /etc/armbian-release ? The update process was otherwise smooth and doesn't seem to have rise to any nasty surprises . I also look forward to trying out the pineH64 image since I see that has just made a big jump, as well as th…

After some hack, I use the SPI port on OPi One to connect with a MAX6675 board. The SPI port on One is SPI0, so armbianEnv.txt should include these: overlays=spi-spidev param_spidev_spi_bus=0 param_spidev_spi_cs=0 the MAX6675 connects to OPi One as: MAX6675 One GPIO ------------------------------------------ VCC PIN17 GND PIN20 SCK PIN23 CS PIN24 SO PIN21 Then use the attachment program to read f…

I recently picked up an Orange Pi Zero 3 and have been trying to figure out how to get the i2c pins working on the GPIO. The pinout shows pins 2 and 3 (229 and 228 according to the orange pi version of wiringPi) being used to i2c-3. The downloadable images seem to be hodge-podge with the orange-pi-os version based on arch linux. But their instructions appears to be based on earlier orange pi models that had an Orange Pi OS based on armbian which included a 'orangepi-config' command similar to raspi-config. There is no orangepi-config in the arch-based Opi-OS. A third party image from leeboby includes a current buster version of Raspbian but while it contains raspi-co…

Hi, this is my first post, my apologies, I could not find a matching topic category for this PCduino3 nano question/issue (no built-in wifi, I use a Roccar wifi dongle) I have successfully built the image using the armbian configuration script (bookworm current), the board boots and runs teslausb, however, I am unable to install the driver for my wifi dongle. The error when starting the install-driver.sh script is "your kernel headers are not properly installed". I tried apt install linux-headers-current-sunxi and kernel-headers-armmp, they install successfully but I still get the same error about the kernet headers not being properly installed. Th…

I am trying to set up a failover connection ( dialup with wvdial ) to use when eth0 doesnt have a connection, Linux a20-SSM 3.4.108-sunxi #14 SMP PREEMPT Tue Aug 25 18:13:23 CEST 2015 armv7l GNU/Linux I have set up my /etc/network/interfaces do run wvdial when eth0 goes down. This happens reliably when I send the command to take eth0 down ( ifdown eth0 ) but not when the cable is diconnected. /etc/network/interfaces allow-hotplug eth0 iface eth0 inet dhcp hwaddress ether 02:17:08:80:c1:98 post-down ifup ppp0 post-up ifdown ppp0 #PPP dialup connection auto ppp0 allow-hotplug ppp0 iface ppp0 inet wvdial pre-up /home/ssm/modemTurno…

Hi, I would like to make my opi plus in AP mode (standalone). I know the img is shipped with hostapd and interface.hostapd ready but is in bridge mode. I am able to use it in bridge mode but i need it to be standalone. How can i set it to just standalone? I tried install dnsmasq and disable the br0 but i think i did something wrong and the board cant be connected. Cheers

Hello Guys, The main reason I bought my orange pi One is to create custom softwares on it(mostly on Linux distro). I checked google and can't really decide which is the best programming language, which have a nice IDE, able to handle GPIO-s and other periferials like SPI, COM...etc, able to create a fair looking UI. Can someone suggest me some ideas? Programming language does not really matter. Any ideas are welcome Regards, G.

Hi, I a couple of days ago, I picked up the Mainline 4.9.7 Jessie image. It ran flawlessly untill last night when I installed samba/minidlna and mounted my hdds (3 usb hdds on a powered USB3 hub and 1 sata 3.5in hdd). When the minidlna was updating its library and keeping cpu usage up and while I was doing some network traffic the CT froze. I thought this was a physical network issue and I bonded the wlan0 and eth0 so that wlan0 acts as backup when eth0 is down. Usually I log on with ssh and keep this headless, but I remembered that I had the tv connected to the hdmi. I attached a pic (sorry for the quality) of the error message. It seems som…

Hi friends, I have read a lot document about booting orange pi zero over usb flash. I flashed latest mainline u-boot to orange pi's SPI Flash. I can boot the system via the usb port which is next to the ethernet. Can I boot the system via the usb ports USB2 and USB3 that the h2+ has and the expansion card that can use it?. I can not see these USB's through u-boot terminal. thanks.

Hi everybody, I would like to use the Nanopi NEO2 as firewall and therefore would like to support testing ethernet. I setup an iperf server on Nanopi NEO2 and I am running the client on my iMac to test stability of ethernet connections. After around 30-40 seconds the ethernet links goes down and is coming up back again. IPERF LOG imac:~ mobs$ iperf3 -p 5001 -c 192.168.1.100 -t 0 Connecting to host 192.168.1.100, port 5001 [ 5] local 192.168.1.109 port 53298 connected to 192.168.1.100 port 5001 [ ID] Interval Transfer Bitrate [ 5] 0.00-1.00 sec 111 MBytes 932 Mbits/sec [ 5] 1.00-2…

Hi, I just realized that my Orange Pi Zero running Armbian now shows a completely wrong temperature reading using cat /sys/class/thermal/thermal_zone0/temp This has not been the case until I updated to Armbian 5.38 by apt upgrade some days ago. Before that the reading was plausible. Not sure which exact version I was running before. I have a cpu temp monitoring script running and just realized that it now gets garbage. At the moment I get a reading of -12°C when outside temp is about 0°C (the OrangePi is in a water proof box outside on my roof). Not a serious problem, but seems to be a bug, so would be nice if it could be addressed :-) . …

I’m running ARMBIAN 5.38 stable on a Banana Pro and having the board go unresponsive regularly – meaning I can't login via SSH (getting a "port 22: Host is down" error) and applications stop running. I’ve used the Banana Pro board with an external 4TB harddrive via eSATA as a media/backup server with a similar software set up for several years (running regular updates). Occasionally it would go non-responsive, but I’d generally be able to run it for weeks without a restart. The need for a restart became more frequent until now it won't run for more than 12 hours without trying to log in via ssh and seeing “port 22: Host is down” and the programs like plex and …

Hi all! I have Orange Pi Zero with armbian kernel 4.14. i'm not sure about the topic name, but to me seems like that. I've managed to make spi tft work flawlessly on my zero. But after i've continued with touchscreen module, i've got problems. After X is started, i can confirm touch is working, because when i touch the display, mouse pointer moves. But in the strange way, very laggy (more than a second to respond), but is works only for ~10 secs, then display stops to redraw. And it is not because of bad contacts! Because i've soldered everything together. And it also freezes if i don't touch it. The system is still working tho,…

Hi guys, I just started using the new Armbian release on my cubietruck and Banana Pi boards and encountered the following problem. On the Cubieboard the wired interface first did not receive any IP address at all. I than tried as alternative to connect the wireless interface through the armbian-config tool. Which did work fine. However the wired interface is now receiving the same IP address like the wireless one. Currently the only way to resolve this issue is by going again through armbian config tool. I am also experiencing the symptoms on my banana pi board except that it does not have any wireless interface. Which th…

Hi, I am using blinkt on win plus, but seems like there are no python GPIO library suits it. Anybody have an idea?

Hi, I am trying to write my own kernel module/drive for the NanoPi air, running a self-compiled version of armbian 5.83. Actually I only added the PREEMTION option to get real-time behavior when reading/writing from IO pins. I started using the "hello world" template from here. To get the module compiled I had to build the headers for my kernel as well using the option INSTALL_HEADERS in the armbian-build config file. The build debian-package called "linux-headers-next-sunxi_5.83_armhf.deb" was copied and installed on the NanoPi. OK, so now compiling (on the NanoPi - so no cross-compilation) works like a charm: > make make -C /lib/modules/4.…

Hi, Is there any instruction available for upgrading a orange pi+ 2e from stretch to buster? I have found Jessie to stretch instructions. Can I use them? Change .list files stretch to buster? Do I need to uninstall any packages? What packages in that case? Thanks

Hello, I have downloaded and installed Armbian Buster mainline based kernel 4.19.y & Armbian Bionic mainline based kernel 4.19.y from https://www.armbian.com/nanopi-neo-air/ With both versions I have the same problem: WiFi is not working at all ! Before the installation I was running the Friendlyarm factory image and had no problems with WiFi. As I have no internet connection, I can not upload the ArmbianMonitor log. Running this gives no errors. root@nanopiair:~# armbianmonitor -v Starting package integrity check. This might take some time. Be patient please.. . It appears you don't have any corrupt files or packages! …

on a Sunvell R69 (H2) and a NanoPi Neo (H3) I got these "old known" eth0 Link Up/Down syndrom, but couldnt find a solution in the forum while using the search-engine armbianmonitor -u System diagnosis information will now be uploaded to Sunvell R69 - Linux sunvell-r69 5.4.0-rc8-sunxi #19.11.3 SMP Wed Nov 27 17:01:29 CET 2019 armv7l armv7l armv7l GNU/Linux : http://ix.io/232T NanoPi Neo - Linux npi-neo 5.3.3-sunxi #5.98 SMP Sat Oct 5 18:34:15 +03 2019 armv7l GNU/Linux : http://ix.io/232U in dmesg it looks like [10536.264427] dwmac-sun8i 1c30000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx [10568.008…

Guys! I have two of the original Pine64+ boards from the kickstarter (with LCD) and tried to launch the latest armbian image on them. Both of them freezes in u-boot after it tries to evaluate USB connections... Rather strange, they work well with the ancient original images. ``` U-Boot SPL 2019.10-armbian (Feb 17 2020 - 09:25:19 +0100) DRAM: 2048 MiB Trying to boot from MMC1 NOTICE: BL31: v2.2(debug):9560593-dirty NOTICE: BL31: Built : 09:25:06, Feb 17 2020 NOTICE: BL31: Detected Allwinner A64/H64/R18 SoC (1689) NOTICE: BL31: Found U-Boot DTB at 0x4095dd0, model: Pine64+ INFO: ARM GICv2 driver initialized INFO: Configuring SPC Controlle…

Hi there, I want to migrate system on OPi PC+ from 32GB uSD card to 16GB card. System is small enough to fit on 16GB, but too large for 8GB eMMC (amazingly fast according dd). How to do it? My idea is: - copy (raw, using dd) first 8192 sectors from 32GB to 16GB, - then remove partition (32GB) and recreate it with 16GB size, format using same EXT filesystem, - copy (on another computer, or "simple" Armbian installed on eMMC) partition contents using rsync. Will it work? Will there be no issue with different UUID of new partition?

Hi all, I'm working with a BPI-P2 board. I installed the last Armbian version for BPI-M2 as the two boards are basically the same except the RJ45 connector and the eMMC. I installed it on an SD card, and everythig worked perfectly. Now I need to put the OS on the eMMC and then completely remove the SD card, but I'm struggling. The default Armbian for BPI-M2 is not intended to support eMMC, so I'm not surprised that with this version the eMMC dosn't show up. So I tried to modify the dtb and enable the eMMC nodes, and then reboot. Here the changes I made: mmc@1c10000 { reg = < 0x1c10…

Hello, I have a problem with communicating with SPI device, namely accelerometer ADXL345 I quadripple checked connection and it seems to be fine, device shows in /dev/spidev0.0 I have also tested shorting miso and mosi and testing with spidev_test, here is the result: spi mode: 0x0 bits per word: 8 max speed: 500000 Hz (500 KHz) TX | FF FF FF FF FF FF 40 00 00 00 00 95 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF F0 0D | ......@....�..................�. RX | 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | ................................ My ArmbianEn…

I had to reapply u-boot image. So, I did it by armbian-config and later by "dd" command. In both situations this is failing (please see u-boot messages printed by serial). I was restoring the image (I have backup images of my SD card) and trying again. What may be the problem? I had linux-u-boot-orangepi*-current 22.08.6 installed. As below - please note Verifying Checksum ... Bad Data CRC BTW. I tried the same on Orange Pi PC and Orange Pi Zero - the same result (fail to boot). => version U-Boot 2022.07-armbian (Oct 18 2022 - 07:35:20 +0000) Allwinner Technology arm-none-linux-gnueabihf-gcc (GNU Toolchain for the A-profile Archite…

Current UWE5622 driver(from the extension) will trigger a kernel warning raised by `void dev_addr_check(struct net_device *dev)`. The following patch seems fix the problem. The bug reporting guide told me not to post this to armbian/build so I decide to make a shout in the forum. diff --git a/drivers/net/wireless/uwe5622/unisocwifi/main.c b/drivers/net/wireless/uwe5622/unisocwifi/main.c index bf2ec6c..b83ab8e 100644 --- a/drivers/net/wireless/uwe5622/unisocwifi/main.c +++ b/drivers/net/wireless/uwe5622/unisocwifi/main.c @@ -15,6 +15,7 @@ * GNU General Public License for more details. */ +#include <linux/etherdevice.h> #include "sprdwl.h" #incl…

Hi, I think there is something wrong with Linux OlimexA20 4.2.0-sunxi #1 SMP Wed Sep 16 10:57:53 CEST 2015 armv7l GNU/Linux. root@OlimexA20:~# cat /proc/cpuinfo processor : 0 model name : ARMv7 Processor rev 4 (v7l) BogoMIPS : 27.78 Features : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm CPU implementer : 0x41 CPU architecture: 7 CPU variant : 0x0 CPU part : 0xc07 CPU revision : 4 Hardware : Allwinner sun7i (A20) Family Revision : 0000 Serial : 1651665802018eb1 root@OlimexA20:~# lscpu Architecture: armv7l Byte Order: Little Endian CPU(s): …

On initial install, It reboots several times then finally gets stuck in a loop with the following two messages: bcmadh_sdmmc mmc1:0001:2: wlan0: (WE) : Wireless Event too big (65535) [ap6210] scan is not ready After 10min. I pulled the plug and started again, same messages eventually.

if use: mpv --vo=vdpau --hwdec=vdpau --hwdec-codecs=all --fs --loop=yes /media/usb/*.mp4 hardware decoding work if use mplayer mplayer -stop-xscreensaver -ontop -quiet -fs -vo vdpau -vc ffmpeg12vdpau,ffh264vdpau, -loop 0 /media/usb/*.mp4 hardware decoding not work Howto use mplayer with hardware decoding videoplaying on Orange PI PC v1.2?

On Orange Pi PC +, usbmount is installed but USB memory is not recognized. How can I determine if it is a device issue or a software configuration problem? (Version 5.23)

Hi, for my project I need to stream a video from IP camera and add some text from sensors into the final video. From armbian console I have installed ffmpeg (apt-get install ffmpeg).. The program works except the text is not included into streamed video: Example: ffserver.conf HTTPPort 8090 HTTPBindAddress 0.0.0.0 MaxHTTPConnections 2000 MaxClients 1000 MaxBandwidth 10000 CustomLog - <Feed monitoring1.ffm> File /tmp/monitoring1.ffm FileMaxSize 50M ACL allow 127.0.0.1 ACL allow 192.168.0.0 192.168.255.255 </Feed> <Stream monitoring1.mjpg> Feed monitoring1.ffm Format mpjpeg VideoCodec mjpeg VideoFrameRate 22 VideoBufferSize 80 VideoSiz…

Hello everybody, I would like to know what needs to be done to make this work. I simply copied over the sources of the r3p2 mali module into the 3.4.113 Armbian kernel source and the module wos built without error. Then I recompiled libump, libmali and fbturbu. But when I tried to put the gpu to work I got an error message: eglgetdisplay() returned no display. Since there was nothing helpful in the logs I coudn't investigate further where the problem lies. Has anybody had success with the newer mali drivers? Any hints are very welcome...THANKS! Paul

Hi, I am trying to pair a Bluetooth speaker with my Banana Pi M2+ (in command line because I can not connect it to a display and/or keyboard. I use it as a remote machine I connect through SSH). It is the first time I do this in command line then I need help to accomplish it successfully. Here is my situation : 1) I saw that the only two available command line for Bluetooth on Armbian are bluetoothctl and bluetoothd 2) I saw in the file /etc/default/bluetooth that the bluetooth will automatically start at boot through the variable "BLUETOOTH_ENABLED=1" 3) I controlled the Bluetooth is well started by using the command line "syst…

hi guys, I have reported this on to etcher folks at https://github.com/resin-io/etcher/issues/1466 Not sure if it's a feature or a bug. Cubie truck 3 Any ideas? Etcher version: Etcher-1.0.0-win32-x64.exe Operating system and architecture: windows 8 Image flashed: https://dl.armbian.com/cubietruck/archive/Armbian_5.25_Cubietruck_Ubuntu_xenial_default_3.4.113_desktop.7z Do you see any meaningful error information in the DevTools? Filesystem Size Used Avail Use% Mounted on udev 941M 0 941M 0% /dev tmpfs 189M 5.5M 184M …

I downloaded Ubuntu server from here https://www.armbian.com/orange-pi-plus-2e/ and then burned it using Etcher to my SD card. I never loaded/installed any OS on my Orange Pi Plus2E before. Without SD card it permanently shows only Allwinner H3 logo on screen, so it seems no OS installed there. Red led is permanently on (not blinking) and nothing elase is happen. After I insert the SD card with the burned image I immediately get green LED on (not blinking), red LED is off. The monitor screen is permanently black and nothing else happens. When I connected USB/UART converter I saw the following in the logs: U-Boot SPL 2017.05-armbian (Jun 13 …

Hi. I want to build a full RT legacy kernel using RT patch 30-real-time143-full-plus-rt-fixes.patch (option 5) for my Orange Pi One. While building I got the error at this line /sun8i/security/apparmor/sid.c#L28 static DEFINE_SPINLOCK(sid_lock); security/apparmor/sid.c:28:28: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘__cacheline_aligned_in_smp’ static DEFINE_SPINLOCK(sid_lock); ^ As seen in the patch file, top line's macro must be translated to static spinlock_t sid_lock __cacheline_aligned_in_smp = __SPIN_LOCK_UNLOCKED(sid_lock); ^ But at this moment I got the er…

Hi, How can I enable both the CS0 and CS1 on the SPI on OPiPC mainline? Need to have both spidev0.0 and spidev0.1 drivers concurently available, yet only one of them is enabled and visible. My armbianEnv.txt verbosity=1 logo=disabled console=both disp_mode=1920x1080p60 overlay_prefix=sun8i-h3 rootdev=UUID=72c69678-cb49-4c08-b5d3-396060e8ff18 rootfstype=ext4 overlays=spi-add-cs1 spi-spidev param_spidev_spi_bus=0 param_spidev_spi_cs=1 param_spidev_spi_cs=0 param_spidev_max_freq=10000000 usbstoragequirks=0x2537:0x1066:u,0x2537:0x1068:u If the latest param is param_spidev_spi_cs=1 then I get only spidev0.1, if the latest param is param_spi…

Hello, First of all, I did check/tried anything i could find on similar issues, for similar SBCs Main issue: only 2/4 USB ports are powered, but they don't recognize any device (keyboard, mouse, memory stick), although, if i plug in an USB hub, it lights up. I also tried an Android and and an Ubuntu LXDE, same problem. What bothers me is that mouse and keyboard worked with the original Android that came pre-installed on the board. Config: - Orange Pi plus 2E (the one with 4 USB ports) + heat sink + HDMI to VGA converter Power source: I tried 4 so far, currently using a PSU of 5.15 V and 4 Amps, through the DC input, jack ba…

Hello I have an issue with my HDMI display. Some of the desktop is out of screen. This is about 3% or 15px all around the screen. Changing resolution from 1080p down to 720p and down to 800x600 doesn't fix the borders. Armbian-config allows me to edit the booting environment. Atleast these lines won't work: disable_overscan=0 .... this can also be 1 with no effect overscan_x=-30 overscan_y=-30 .... these can also be positive with no effect also overscan_top, overscan_bottom, overscan_left and overscan_right don't work Only line that changes something is the one with resolution: disp_mode=800x600p60 I don't have zoom on this display or I have l…

--- ENGLISH --- Hello, Is there a kernel 4.9+ with the usable sata port, for an Orange PI plus 2 ? I looked HERE but I can not recover an old version with functional SATA port. Thanks for your help. Marc --- ORIGINAL --- Bonjour, Est ce qu'il existe un kernel 4.9+ avec le port sata utilisable, pour un Orange PI plus 2 ? j'ai regardé ICI mais je ne parviens pas à récupérer une ancienne version avec port SATA fonctionnel Merci pour votre aide. Marc

Hi all, I've been struggling with the issue in the topic for a few days now. Actually the ideal solution would be a read-only root file system (with a writable overlayfs on top), so that I can just turn the power off, without risking any SD-card/filesystem corruption. There seems to be an easy solution for that according to this page: https://docs.armbian.com/User-Guide_Advanced-Features/ section "How to freeze your filesystem?". But the package "overlayroot" that is mentioned there does not seem to be available for Debian (Armbian Stretch). A quick attempt to adopt the overlayfs-startup scripts to Debian failed, because Debian is using systemd and the…

Hello! The same issue was solved one year ago: Module 'nls_utf8' was missing in armbian 5.3.6 (4.13.16-sunxi64) Some time ago, the absence of a module was again discovered, without which the 'mount' with option 'iocharset=utf8' fails with error. The output of: grep -i nls_utf8 /boot/config* is # CONFIG_NLS_UTF8 is not set Please include again the module 'nls_utf8' in kernel update. Thank you very much! Denis

Is there Hardware virtualization support available for orange Pi PC3, which have H6 family processor ? Can we port Xen hypervisor over it ?

Hi , I'm using orange pi lite (H3) and armbian xenial desktop. When I plug in my adata 8GB flash drive armbian couldn't find it. What should I do?

Just wanted to note this - target NanoPi NEO2 - task at hand is Byte-UnixBench.... https://github.com/sfx2000/byte-unixbench more to follow... Spoiler 2708.074105] Unable to handle kernel paging request at virtual address f7ff8000358ddbf0 [ 2708.082298] Mem abort info: [ 2708.085153] ESR = 0x96000004 [ 2708.088834] Exception class = DABT (current EL), IL = 32 bits [ 2708.094826] SET = 0, FnV = 0 [ 2708.097899] EA = 0, S1PTW = 0 [ 2708.101086] Data abort info: [ 2708.104010] ISV = 0, ISS = 0x00000004 [ 2708.107886] CM = 0, W…

Hello, Using Armbian 20.02.1 Buster Image: Armbian_20.02.1_Orangepiplus_buster_current_5.4.20 Kernel: Linux orangepiplus2 5.4.28-sunxi #20.02.7 SMP Sat Mar 28 14:32:15 CET 2020 armv7l GNU/Linux. USB devices can't be detected. I tried with my bluetooth dongle, usb storage drive. None of them works. lsusb -t /: Bus 04.Port 1: Dev 1, Class=root_hub, Driver=ehci-platform/1p, 480M |__ Port 1: Dev 2, If 0, Class=Mass Storage, Driver=usb-storage, 480M /: Bus 03.Port 1: Dev 1, Class=root_hub, Driver=ehci-platform/1p, 480M /: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=ohci-platform/1p, 12M /: Bus 01.Port 1: Dev 1, Class=root_…

Hi everyone, I am trying to setup a new armbian buster system on a lime2 eMMC board. Not currently using the eMMC. Wanted to have a regular armbian install on the sd card, and then an encrypted root partition on an SSD attached with SATA. I've done this before by loosely following this post If I setup a system without using dropbear to unlock the root partition and boot, and use a keyboard to enter the password to unlock it instead, that works fine. However, if I install the `dropbear-initramfs` package, copy my ssh keys to /etc/dropbear-initramfs/authorized_keys and then do `update-initramfs -u` the bootloader doesn't seem to get past the initial stages. Here …

Hello, I have a cubitruck With armbian and it runs the most time fine. Now i'm Not AT Home and the cubi is Out, I See in my router That He is Not running. I Can't connect over ssh. Who can I Look after a reboot when i'm AT Home what is the problem for going down. Thank you

Hello, After looking on the forum and on the internet I am turning to you. Here is my problem: armbian is currently running on an SD card and I would like to put it on the eMMC memory of my orange Pi 3 (8gb). When I run the sudo nand-sata-install script it offers me to install eMMc on my memory but tells me that the partition is too small. 8go seems largely sufficient to install armbian. You should know that this orange Pi already contains linux firmware in its internal memory. I figured this was due to the fact that maybe this version of armbian didn't support emmc memory, so I tried with the focal version, the buster version and the bionic version…

I'm not sure if this is a bug that needs to be reported and I don't know what issues it may be causing, if any. ----< CUT >---- Sep 16 08:55:56 loki kernel: [35972.411737] ieee80211 phy2: brcmf_fweh_event_worker: event handler failed (72) Sep 16 08:55:56 loki kernel: [35972.465736] ieee80211 phy2: brcmf_fweh_call_event_handler: no interface object Sep 16 08:55:56 loki kernel: [35972.465781] ieee80211 phy2: brcmf_fweh_event_worker: event handler failed (72) Sep 16 08:55:56 loki kernel: [35972.471791] ieee80211 phy2: brcmf_fweh_call_event_handler: no interface object Sep 16 08:55:56 loki kernel: [35972.471838] ieee80211 phy2: brcmf_fweh_event_worker: eve…

I am getting a quite loud audio spike / noise sound at the end of an audio play in python when using the following script: https://gist.github.com/bbence84/04d1935a92a4b4ab3d44bf182ea4bcc1 Wav to be played, but it does it with any other wav or mp3 file: https://easyupload.io/vbat12 It uses the speech_recognition package and the preferredsoundplayer package, but also the VLC python package shows the same when playing the audio. When changing the audio play to be non-blocking for the python script, the issue goes away... Very strange. This is driviging me nuts. I'm on Armbian 22.11.1 Jammy / 22.04.1 LTS, kernel 5.15.80-su…

Maybe there has been a glitch in the update release process? I performed a sudo apt update && sudo apt upgrade and this has pulled down an automated build. Should it had pulled down a supported build instead?

https://www.armbian.com/olimex-lime-2/ Does the image come with and install non free software on the computer? If so is there documentation showing how to do a fully free software installation of the Armbian_community_25.11.0-trunk.546_Lime2_trixie_current_6.12.58_minimal.img image? Free software is software you can use, share, modify and redistribute. Thank you.

Help me for choose the best compatible WiFi Dongle for Orange PI PC v1.2 Maybe exist list supported wifi dongle?

We try to set up lirc on opi pc, but only receive works fine, any idea how to set it up to work in both modes - transmit and receive?

Hi, today I want to tell you, that I am very much upset about the result of the latest ARMBIAN Update! After updating I figured out, that the latest update erased my bash.bashrc.custom, which took me a long time to set it right! Unfortunate I did not have a backup! I am very much upset, that an armbian update erases configuration files WITHOUT any further notices!!! Regards, Ireng

My orange PI PC was working flawlessy but now it wont boot and via serial I can get this: U-Boot SPL 2016.09-armbian (Oct 23 2016 - 17:08:22) DRAM: 0 MiB ### ERROR ### Please RESET the board ### Then it stops there. What can I do?

Please, help! How i can set resolution - 800x480??

Hi. I'm using CubieTruck and Armbian mainline up to dated version. The CT is a headless server, so I don't connect any cable to it. However, one day the ssh server in CT did not work, I tried to connect CT to a monitor using HDMI cable. Even though I connect a cable, I could not see anything, and the monitor said 'No signal'. (Well, if the hdmi cable was connected, and CT is booted with it, the output is ok with hdmi signal.) If I connect with a vga cable, there is no problem. Here's what I want. I want to see the screen when I connect CT with a hdmi cable, even if the cable has not been connected. (I hope you understand what I mean..) I followed thi…

Hi all! Please excuse my noobness. It's my first day on Armbian + Orange Pi Zero. Until now I was using Raspbian + RPi Zero W but I could not find related docs for what I was doing so far on the previous platform. My goal here is quite simple: being able to connect my OPi through OTG (ether) and enable the RNDIS interface on my macOS. Already tried several tips and configuration snippets I've found around, which led me to this stage: The USB0 is up and configured: 3: usb0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000 link/ether ee:95:f9:4f:6c:28 brd ff:ff:ff:ff:ff:ff inet…

Hello, I'm trying to get an "Orange Pi Zero" running with Wifi and OV534 (Sony PS3 Webcam). I can't get both running at once. My attempts so far: Armbian_5.30_Orangepizero_Ubuntu_xenial_default_3.4.113: Wifi ok, no ov534 Armbian_5.30_Orangepizero_Ubuntu_xenial_dev_4.11.3: No Wifi, ov534 ok Armbian_5.32.170912_Orangepizero_Ubuntu_xenial_dev_4.11.12: No Wifi, ov534 ok I've read about XR819 on github posts (to use under 4.11), but I couldn't load it, there are three module files for this module: fw_xr819, boot_xr819 and sdd_xr819, but none of these is loading successfully: modprobe: FATAL: Module xr819 not found in directory /lib/modules/4.11.3-sun…

Good day to all! I was wondering how would I be able to spin down the hard drives connected to my bananapi media/file server to save power and reduce wear and tear. Thank you in advance!

Hi, I would like to know if there is a way to set the display resolution to 640x480, to use with an old CRT screen from a IBM PS/1 model 2011 that I want to revive. I know about h3disp, but it only has high resolutions, and that old screen does not want to sync correctly to anything other than VGA. I use an Orange Pi One, with a HDMI to VGA adapter and Armbian 5.35, with legacy kernel 3.4.113 Thank you! -Alexandre

Hi, I am running Armbian on my Pinebook and want to install Kodi version 17. In official repository only version 15 is available. Is it possible to install version 17 and if yes, please tell me some instructions. Thank you in advance.

OrangePI PC2 Problem report of the current state and improvement favor. --------------------------------------- Armbian_5.40_Orangepipc2_Ubuntu_xenial_next_4.14.15_desktop Keyboard and the monitor resolution.. other All kinds' setting, reboot, when, everything goes off. Therefore it isn't used. --------------------------------------- Armbian_5.34.171121_Orangepipc2_Ubuntu_xenial_next_4.13.14_desktop A keyboard is the monitor resolution only. It's preserved and it's practicable somehow. (1) Setting of other than above, reboot, when, please disappear. I close. (2) Cash of Root becomes full right now, even Mozc, install, can. ---…

Hi, I thought instead of waiting for mainline kernel support for these boards, if it would be possible to use Allwinner H6 BSP 4.9.56 kernel? Found at https://github.com/Allwinner-Homlet/H6-BSP4.9-linux I am able to compile it on Sunxi's Ubuntu 16.04 Beta image, however from the serial output it seems to at least have trouble with the sd card initializing. I tried to copy over the sd card information in sdmmc@04020000 from Sunix's own /boot/orangepi/OrangePiH6.dtb into Allwinners sun50iw6p1.dtsi but the boot only went a little further ending in a similar kernel panic to when I used the the BSP4.9 with Sunxi's original OrangePiH6.dtb. I am not very skil…

Hello, after some time i am trying to work again on my Orange Project. Now i want to connect an serial device on UART2 (PA0 / PA1). The devices /dev/ttyS0 - S3 are existant, but no data is coming in over RXD. I already read the thread here and tried to check the configuration. I upgraded my armbian and i am now working with ARMBIAN 5.60 stable Debian GNU/Linux 9 (stretch) 4.14.70-sunxi64 So i hopefully found the configuration in /boot/dtb-4.14.70-sunxi64/allwinner/sun50i-h5-orangepi-pc2.dtb After decompiling i found uart0@0 { pins = "PA…

hi there, Recently there was an update for all Olimex boards with A20. Now we have one image for all the boards and it includes mainline kernel which is cool. I checked here and took the image from here. Now after a while I got strange error and wanted to check with you if you can share an opinion what this could be: [32673.051479] Unable to handle kernel NULL pointer dereference at virtual address 0000 [32673.060027] pgd = 9d6652ac [32673.062884] [00000000] *pgd=00000000 [32673.066666] Internal error: Oops: 5 [#1] SMP THUMB2 [32673.071795] Modules linked in: joydev input_leds ipt_MASQUERADE nf_conntrack_netlink iptable_nat nf_nat_ipv4 xt_addrt…

I know Lamobo-r1 has many problems and that the support ended, but it works fine for me. Everything works fine with kernel 4.14.84-sunxi, however, when I update the kernel, the b53 switch does not work anymore. I need to update the kernel to add another wifi usb dongle that seems to work only with newer kernels (https://github.com/aircrack-ng/rtl8812au/issues/272#issuecomment-467983704). Anybody experiencing the same problem? Any ideas for a workaround?

the new version of Armbian (5.83) Does not boot from sd card I tried to install 5.69 it's work normally. I tried to all the sd card formatter rufus and wın32 disk imager and different sd cards but no way new version does not work anyway. when i burn to 5.69 it boot normally. I guess you have to control the package whıch you upladed for opi pc+ thanks

Hello all, I used using opi one with (Armbian_5.90_Ubuntu_bionic_4.19.57) image. and used the uart0 pins for hardware pwm but the output was around 330mv pwm not 3.3v as i want. my initial thoughts was either the uart0 isn't disabled or there are no pull ups activated, although i tryed using this: https://github.com/iboguslavsky/pwm-sunxi-opi0 Remap pins in FEX: ; Disable debug UART0 [uart_para] uart_debug_port = 0 uart_debug_tx = port:PA04<2><1> uart_debug_rx = port:PA05<2><1> ; Enable PWM0 on PA05 [pwm0_para] pwm_used = 1 pwm_positive = port:PA05<3><0> bu…

I have Orange Pi Zero and plugged bad USB modem with power problems. Some moment modem have power problem and disconnect from board. USB port in Orange PI disabled after it - lsusb show one of two board's USB hub is absent After reinstall image in this board, USB hub works well. I think, USB hub disabled by OS when USB port has errors. Let me now. how to enabled USB hub without OS reinstall?

Hello, can anyone share his hostapd.conf where he managed to get HT40 "width: 40 MHz" running on orange pi lite 2 while it is in AP mode ?

Hello, I am working with a Nanopi Neo Air incorporating the System on Chip Allwinner H3. I need to establish a serial communication via the SPI bus, to do this I am looking for some information related to the SPI bus. Can you help me to know the following information please: - What are the min and max SPI bus frequencies that I can use with the Nanopi Neo Air (Allwinner H3)? How can I calculate them? And are there specific frequency values to use (meaning the relationship is not linear, for example: 3.84MHz, 4.34MHz, etc)? - Can the Nanopi Neo Air be configured as an SPI bus master and as a slave (not at the same time) or o…

I have a NanoPi Neo Core and I'd like to analyse the SPI controller driver and why it toggles the lines the way it does. In the overlay file, all I see are mentions to 'spidev'. Where can I find out why the data lines shown below toggle the way they do? I.e. chip select goes low way before the clock line. The MISO line has a droop to GND briefly and the CLK line hangs high for a while before toggling... Thanks forum :). YELLOW: CS PURPLE: MOSI BLUE: MISO GREEN: CLK EDIT: I'm sending two bytes, 0xDA, 0x00 at spi mode 3. Ignore the decoder, it was set to read LSB first.

Yesterday, I tried to use the digital IO in my opi zero3, with the Python GPIO package from https://opi-gpio.readthedocs.io/en/latest/ by Richard Hull It depends on having sysfs files in /sys/class/gpio/ My original opi zero has these files and it works, but my opi zero3 doesn’t have these files I learned that /sys/class/gpio is created if the linux kernel is configured with a specific option ON, as suggested in the documentation: https://github.com/rm-hull/OPi.GPIO https://linux-sunxi.org/GPIO Also, a developer has made a change on the opi.GPIO project to support opi zero3 https://github.com/rm-hull/OPi.GPIO…

Just installed armbian on an Orange Pi Zero 3. Right of the bat, had it apt updated and tried to install armbian-config. The package is unavailable, though. me@orangepizero3:~$ apt search armbian-config Sorting... Done Full Text Search... Done me@orangepizero3:~$ apt policy armbian-config armbian-config: Installed: (none) Candidate: (none) Version table: me@orangepizero3:~$ cat /etc/apt/sources.list.d/armbian.list deb [signed-by=/usr/share/keyrings/armbian.gpg] http://beta.armbian.com bookworm main bookworm-utils bookworm-desktop Having checked the beta.armbian.com, I don't see the `main` pool. Mirrors do have it, though. Very odd!

I've noticed some other threads about Banana Pi builds not booting. I tried the 6.12v built on Jun 19 and that's when my device stopped booting. It won't even power on. I suspect the firmware update is corrupting the MicroSD card. I originally had an older build running and ran an update/upgrade and my system wouldn't boot (won't power on) after that. I purchased a new MicroSD card, and my system booted with an older build. Not realizing my MicroSD would get corrupted, I tried updating/upgrading again and I'm back to not booting. I don't have enough MicroSD cards to pinpoint the exact package. My working build is from 6.6.17, 24.5.0-trunk.58. It appear…

Hi, I installed on my Orange Pi Zero (not plus) armbian and using armbian-config I am trying to install Octoprint to control my 3d printer. I got an error: docker: Error response from daemon: error gathering device information while adding custom device "/dev/video0": no such file or directory I have no webcam attached and I am not planning to use it for now, Can I disable this check?

Just installed the v3.7 / 14.5.2015 on my cubieboard, then when i load python, it say the version is 2.7.10~rc1 ???? I searched in the debian packages, even the unstable don't have this. And when i looked in sources.list i found the first line was testing, is this normal ? Jessie is stable no ? Well for now I think aptitude have fix my broken package, but I wanted to report you this weird thing.

Hi, I'm using Cubieboard-2 Armbian_4.2_Cubieboard2_Debian_wheezy_3.4.108. The problem is that there is no Line in device, my test with arecord: I have no idea on how to activate the Line in configuration. Do I need to enable it in .fex script? Or there is no hardware support? Can anyone help me? Thanks

How do I copy sdcard image to nand . I tried to use the ./nand-sata-install script and it returns the following message " There are no targets. Please check your drives. "

I've just installed the Armbian 5.20 in the Banana PI M2. No boot. The message "Waiting for PHY auto negotiation to complete .....Timeout! Could not initialize PHY ethernet@01c30000" shows up over and over again and the boot freezes in sequence. Somebody knows what is going on?

Hello After trying (unsuccessfully) several linux distributions on an orange pi plus 2e, I was happy to find the jessie desktop, which accepts wireless keybord and wifi or ethernet connection with no need of further command line. The only problem: no sound. Could somebody help with that?

Hello. I updated my system to 5.25 version, and ralink usb wifi stopped working. As i can see, there is no drivers (mt7601Usta), but drivers exists at system. I tried to download drivers and complied it, but it didn't help me. Does anybody use wifi ralink dongles on orange pi zero 5.25 (3.4.113 debian) ?

A board (nanopi neo) collects some information and stores it to SD card. Users than change the SD card and open it on PC (windows). Due windows limitation, there is only one (first) partition (fat/ntfs) can be visible. Current mainline image for nanopi neo contains only one ext4 partition, so I tried to gparted it (moved first partition and made new FAT16 one), but for some reason, the image did not boot. So I'm looking for info, how to make two partitions properly.

Hi. Kernel version : 4.11.7-sun8i My trouble is that clk is weird in using spidev. This is a oscilograph when i send a command with spi. First line is CLK and second line is CS0. My slave chip can not receive commands. and I think it due to this weird CLK. CS seems affect CLK. I just want to use spi with CS keeping active-low. But, following code setting mode of spi occured an error. "invalid argument exception" mode = SPI_MODE_1 | SPI_NO_CS; if (ioctl(file,SPI_IOC_WR_MODE32,&mode)<0){ perror("can't set spi mode"); return; } this work properly. mode = SPI_MODE_1; if …