Allwinner sunxi

Hello, everybody. I have an orange pi pc2 device with armbian-release on it: BOARD=orangepipc2 BOARD_NAME="Orange Pi PC2" BOARDFAMILY=sun50iw2 VERSION=5.46 LINUXFAMILY=sunxi64 BRANCH=next ARCH=arm64 IMAGE_TYPE=custom BOARD_TYPE=conf INITRD_ARCH=arm64 KERNEL_IMAGE_TYPE=Image I was install my nodejs app on it, which lunch on start up. Device now is remote. Everything was fine, but now i have a look at log (my nodejs log) and see strange reboots after that my app dose not lunch. When I ask people (device is remote and is ON) do OUT/IN power on it - after that everesing fine until the another randoml…

Hi, I have downloaded and installed Armbian to my Pcduino3 board with the legacy kernel 3.4.113. But now I want to downgrade it to the kernel version 3.4.79. Is there any way to do it? Regards,

Hi, On cubieboard 1 with following config : cubieboard login: root Password: Linux cubieboard 4.9.7-sunxi #1 SMP Thu Feb 2 01:52:06 CET 2017 armv7l ____ _ _ _ _ / ___| _| |__ (_) ___| |__ ___ __ _ _ __ __| | | | | | | | '_ \| |/ _ \ '_ \ / _ \ / _` | '__/ _` | | |__| |_| | |_) | | __/ |_) | (_) | (_| | | | (_| | \____\__,_|_.__/|_|\___|_.__/ \___/ \__,_|_| \__,_| Welcome to ARMBIAN 5.25 stable Debian GNU/Linux 8 (jessie) 4.9.7-sunxi System load: 0.72 Up time: 49 sec Memory usage: 4 % of 1002Mb IP: 1…

OrangePi Zero has (according to specifications) 2Mb SPI flash. Sorry for my newbie question, but how is it possible to write there some file and read it later? Or at least some data (string)?

Guys, purchased shortly my first Bananapi M1. I installed without problems Armbian to a SD Card and now in second step i would like to connect a 1TB Western Digital 2,5" SATA HDD. But which connection cable do i have to use with the Banana Pi? Can someone please post a link url if allowed or let me know? Thanks in advance!

Gentlemen, which ports are confirmed to be working with 4.x kernels on Lamobo R1 ? I'm using Ubuntu image 5.10, with installed updates: Ubuntu 14.04.4 LTS 4.5.5-sunxi. So far, seen only working UART3 (/dev/ttyS1) on pins 8/10 of CON3. U-boot seen on UART0 (J13), but under Linux, don't see anything on either UART0 or UART2. Anyone seen better results ?

hi, as of this morning, i tried updating my NanoPi Neo build (kernel=dev, os=ubuntu xenial, type=no graphics/server). Has been building fine for months. I think problem is in U-Boot (header missing ?) LDFLAGS="" python ./lib/libfdt/setup.py \ "-Wall -Wstrict-prototypes -O2 -fomit-frame-pointer -include ./include/libfdt_env.h -idirafterinclude -idirafter./arch/arm/include -I./lib/libfdt -I./tools -DUSE_HOSTCC -D__KERNEL_STRICT_NAMES -D_GNU_SOURCE " lib/libfdt/fdt.c lib/libfdt/fdt_ro.c lib/libfdt/fdt_rw.c lib/libfdt/fdt_strerror.c lib/libfdt/fdt_wip.c lib/libfdt/fdt_region.c lib/libfdt/fdt_sw.c tools/libfdt_wrap.c tools/libfdt_wrap.c:147:21: fatal error:…

Hi, I've been using armbian in combination with openmediavault for the last years to access my files on an 1TB HDD. Today I wanted to upgrade the drive to a 3 TB one, but it just shows a capacity 746GB. Is there a size limit on the GL830 for harddrives or why isn't the real capacity showing up? fdisk-l: Disk /dev/sda: 746.5 GiB, 801569724416 bytes, 1565565868 sectors Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Thanks in advance Regards, Joshua

I do not use wifi at all, so I'd like to disable it completely. It's not configured right now, but I wonder if I could power down whole chip, ex. commenting it out in DT file? Does it save some power or not?

Hi, is it possible to have the serial/UART on the Olimex LIME2 to work as a serial console on Armbian Jessie (kernel version 4.5.2)? The UART is already working during early boot, but once kernel is loaded it becomes inactive. /boot/boot.cmd contains: setenv bootargs "console=tty1 root=/dev/sda1 rootwait rootfstype=ext4 sunxi_ve_mem_reserve=0 sunxi_g2d_mem_reserve=0 sunxi_no_mali_mem_reserve sunxi_fb_mem_reserve=16 hdmi.audio=EDID:0 disp.screen0_output_mode=1920x1080p60 panic=10 consoleblank=0 enforcing=0 loglevel=1" Thanks

Hi all, I am using NanoPi-Neo Air and my application is just logging binary data to a file. The board is powered by usb from a pc. I can dump and list to see binary data inside the file but after unplug power from usb then power up the board from usb again, I found the binary data is gone or some errors data, unknown data appended. Do you guys have same issued? or any suggestions? Thanks in advance

I have a question for more experienced users. Quite a long time ago I built an internet radio based on OrangePi Lite + DAC I think in the I2S interface with the module: PCM5102 ... PCM5102 DAC Decoder I2S -Aliexpress unfortunately the board broke down. I have another model, the aforementioned Pi 3 lts but it seems to be less supported. Can I connect the above-mentioned PCM5102 module to this model? Or maybe buy some other supported model that will work just as well as Pi lite with this DAC model or another? Ps. it would be nice if it had the ability to upload Armbian firmware to emmc flash memory I installed Armbian/Ubuntu on Pi3lts but I get some erro…

Hi guys, I am very sorry to bother you, I tried everything I could to make this work but unfortunately, I can't figure it out. So here I am asking for help ! I am using the Armbian 4.5 Jessie (Kernel 3.4.109) on an Olimex Lime A10 board, everything works fine (Wifi & Bluetooth via USB dongles), but there's no sound. I tried aplay -l but nothing is found. modprobe sun4i_codec returns "codec not found". Could you help me find what's wrong ? I would like to avoid compiling a kernel by myself if it's possible ... Thanks !

Hi, I have recently upgraded Armbian as suggested with: apt-get update apt-get upgrade apt-get install -f apt-get upgrade apt-get autoremove -y After that i2c-0 stopped working: Output if i2cdetect -y 0 before upgrade: 0 1 2 3 4 5 6 7 8 9 a b c d e f 00: -- -- -- -- -- -- -- -- -- -- -- -- -- 10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 30: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 40: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 50: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 60: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 70: -- -- -- -- --…

today I compiled a image for my OPi One: Armbian Buster with Linux 5.4.2-sunxi package bsp-kernel[19.11.3.342] u-boot[19.11.3] dtb[19.11.3.342] firmware[19.11.3] config[19.11.3] branch[dev] but mpg123 is playing a 128kb/s Radio-Stream much too fast via HDMI (hw:0,0) - streaming the same URL via a USB-Audio-Dongle (hw:1,0) has the right speed Spoiler root@opi-one(192.168.6.114):/toshiba/iradio/stations# more ./MP3_SAW_80s http://saw-de-hz-fal-stream10-cluster01.radiohost.de/saw-80er_128 root@opi-one(192.168.6.114):/toshiba/iradio/stations# mpg123 -v -b 2048 -a hw:1,0 -@ ./MP3_SAW_80s High Performance …

Hi, I just joined up so I'm an extreme newbie here. I'm running the legacy trusty version of Armbian just downloaded. The HDMI display and USB ports are working fine. The Cubieboard2 is showing up in the network. I need to get the SPI interface going to talk to a microcontroller -- an STM32F303. I've enabled the particular SPI port I need in the cubieboard2.fex file (derived from the stock cubieboard2.bin file) and created the cubieboard2.bin file in /boot/bin after backing up the original. After that change, I rebooted. I got the /dev/spidev0.0 to show up. What do the parameters in the spi_board section mean? Is that documented somewhere? Thanks, Chri…

Hi, I'm new to the Armbian/Alt PI scene, coming from a RPI Zero W. I'm needing to interact with my PI using a CH340G (is it compatible) USB to TTL dongle. I've also trjed a CH351A device, put it into UART mode. Unfortunately, I get nothing from the PI. Despite using the primary RX/TX pins. I've also tried enabling all of the UART pins using armbian-config, and using another set of pins - to no avail. Please view my setup below. I've run out of ideas of where I'm going wrong. I've tried these images: Armbian_5.90_Nanopineo2_Debian_buster_next_4.19.57 Armbian_5.90_Orangepione_Ubuntu_bionic_next_4.19.57 Refer…

Hi, I am running Debian buster 10.1 with following kernel on nanopir1 (1Gb of RAM) Linux srv-nanopir1-170 5.3.9-sunxi #5.99.191113 SMP Wed Nov 13 08:12:49 CET 2019 armv7l GNU/Linux I have all services up on local LAN Ethernet port, but not possible for me to setup WAN Ethernet port . Packages installed are .... The boot sequence is ... My current network configuration in udev is .... As a result, r8152 kernel module is correctly installed After connected one RJ45 to external DHCP server (running) , it is not possible to setup interface …

Hello, I have Orange Pi 3 board. Panfrost drivers works fine bud I accelerated video not working. I have trouble with the drivers... I compile https://gitlab.freedesktop.org/vdpau/libvdpau and https://gitlab.freedesktop.org/vdpau/vdpauinfo When I run vdpauinfo I get: Failed to open VDPAU backend cannot open shared object file libvdpau_sun4i-drv.so No such file or directory Bud i dont know hot to make this .so file... Thank you. ==================================================================================== EDIT (i can post to here only one message per day...). Here is more informatio…

I have a cubieboard2 (A20 - sunxi 7i) and i have attached an Foresee EMMC to it and i am able to boot a customised Sunxi-Kernel (3.4.104) from it. I also have an SDCARD with Armbian (Legacy) Jessie which also boots fine. My question is what do i need to do in order to get Armbian (legacy) Jessie to be able to mount the emmc? When i boot up Armbian via the sdcard, i can't see the emmc. Am i doing something wrong, or do i need to make some changes to the .fex file? Should i use the Armbian tool to make changes to the .fex file and roll a new u-boot, if so, can you guide me as to what changes i need to make in order to see both the sdcard and emmc flash devices from…

Hi to all, I'm newer so I hope your comprehension. my board Orange Pi Zero 512 my python script for turno on/off rele board works well, but only if call it directly form terminal. If call it from cgi, crontab don't controll the rele board: gpio.init() semms crashed but the script complete its work. What I'm wrong? Thanks ---- from pyA20.gpio import gpio from pyA20.gpio import port gpioinit = gpio.init() gpioscfg = gpio.setcfg(port.PA19, gpio.OUTPUT) gpio.output(port.PA19, gpio.LOW) print "ok" -----

Greetings, I've been building an image for a banana pi m2-zero. I noticed during the build that the following DTS is chosen: sun8i-h3-orangepi-zero-plus2.dt There is a sun8i-h2-plus-bananapi-m2-zero.dts in the same directory, that I think would be more relevant. How can I choose this DTS instead?

Hi Folks, I have a NanoPi NEO Air with Armbian Bookworm. Previously I was running Armbian 23.11.1 Bookworm with Linux 6.1.63-current-sunxi, but after an apt upgrade I am now with Armbian 24.2.1 Bookworm with Linux 6.6.16-current-sunxi. With this latest upgrade I completely lost the USB console feature which for my application is a MUST. How can I fix it? Have a nice day, Mattia

Hi, i am new here and like to say hello. On my new cubietruck I have one after another tried to install and use wheezy and jessie with legacy and vanilla kernels. With the legacy versions i failed because there seemed to be no video-output on VGA from the kernel. The boot-process seemed to be stopped after Starting Kernel. Then i found that it was visible on HDMI but not on VGA. Because I have only VGA-Screen on my desk i went on with vanilla jessie. But on the download-page there is the note "No audio or accelarated video". What does it mean in detail? I installed mplayer but in fact there is no sound at the jack. Isn't therefore any driver available? Which …

Thanks to the latest Armbian and my own script - I now have a NanoPi Neo (two of them actually) running everything I want - Node-Red, Mosquitto, SQLITE3 etc..... got control of serial ports - marvelous. I have only one problem - I have no idea despite several experiments - how to get WIFI working on the standard cheap Wifi dongles you get on Ebay. (usually say 802.11n on the black plastic end). Anyone succeeded with this? Pete.

Hi, I have an Oracle PI PC+ which will not boot without the hdmi connected. If you disconnect the hdmi once the board has booted it crashes or at least stops responding to ping/ssh over the ethernet. I've used pretty much all the builds I can find on armbian.com including the nightly builds with don't show a display at all but still fail without the hdmi. I've also tried booting from SD card and the emmc almong will messing with the /boot config files such as setting the console to serial and can't see anything interesting in the messages file. It shouldn't be a power issue as I'm using an Anker 2.4a PSU but I've tried other PSUs as well wit…

can not update linux-stretch-root-next-bananapi_5.37_armhf.deb this is the apt-get error: The following packages will be upgraded: linux-stretch-root-next-bananapi 1 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. Need to get 406 kB of archives. After this operation, 0 B of additional disk space will be used. Do you want to continue? [Y/n] Y Get:1 http://apt.armbian.com stretch/main armhf linux-stretch-root-next-bananapi armhf 5.37 [406 kB] Fetched 406 kB in 0s (647 kB/s) (Reading database ... 112114 files and directories currently installed.) Preparing to unpack .../linux-stretch-root-next-bananapi_5.37_…

I've got an Orange Pi PC2, and I'm running some pretty CPU intensive tasks on it. However, I'm running into a situation where the processor is overheating and shutting down. I've got a bunch of OPiZero's, and on those I'm used to the kernel automatically throttling the CPU frequency down and/or shutting off cores in response to rising CPU temps -- but I'm not seeing that happen on the PC2 -- it just stays at max CPU speed until it overheats and shuts down. Is there a way to enable that same behavior on the PC2? (I'd rather it throttle down the CPU frequency instead of overheat...)

Hello, Did someone found BT dongle working with OrangePi Lite? I would like use it to send files to other BT device. Is this possible with this model of OrangePi?

Hello, I've been running Armbian for a while on an Orange Pi Zero without any issue. Every now and then I perform an apt update && apt dist-upgrade on that board but today the upgrade process failed with the following error and I'm not sure how to fix it. renaud@AnetA8:~$ sudo apt update && sudo apt dist-upgrade -y Hit:1 http://ports.ubuntu.com focal InRelease Hit:2 http://ports.ubuntu.com focal-security InRelease Hit:3 http://ports.ubuntu.com focal-updates InRelease Hit:4 http://ports.ubuntu.com focal-backports InRelease Hit:5 http://armbian.hosthatch.com/apt focal InRelease Reading package lists... Done Building dependency tree Readin…

It used to function fine, however after not using it for awhile it has quit working. It starts booting normally, then hangs with what's visible on the screen being a bunch of systemd messages, with the last being either something about system variables or mounting FUSE file filesystem, when it's the latter it's followed up with a kernel panic. I've reflashed several times using both the server and desktop images freshly downloaded, no difference. The power supply I'm using worked before, as did the SD card. Unfortunately I have no way of showing you system logs or such for the time being. Any help would be appreciated.

Hello, I have orange pi zero with armbian and i need to upgrade kernel to version 4.x how to do it? ARMBIAN 5.38 stable Debian GNU/Linux 9 (stretch) 3.4.113-sun8i is it possible at all?

Hi all, I am hoping there is a straight forward solution to this; I've read this thread on turning on and off the usb OTG using GPIO commands: The concept is really clever and I was hoping to use it as part of my Octoprint 3D printing setup so that I can turn off printer when not in use. The only catch is that the method requires modifying the ./bin/orangepione.bin file which isn't present on my version of Armbian (Buster). TL;DR according to the post I need to 1. convert ./bin/orangepione.bin to FEX, 2. edit the file by adding "usb_drv_vbus_gpio = port:PL02<1><0><default><0>", 3. convert …

Hello, Is there a guide / tutorial on making Kodi run with hardware acceleration enabled on Armbian on Orange PI PC Plus? e.g. like how LibreELEC does it. I have found a bunch of information on different sites and forums, but I can't put it all together. What I know so far: * Apparently the HW-accelerated decoding is supposed to be done on Kodi's side via VDPAU API * The Kodi build in Armbian repos does not have built-in support for libvdpau (?) * ffmpeg, the video decoding library used by Kodi, doesn't support Allwinner GPU out of the box and needs patching * Kodi needs to be re-compiled with the patched ffmpeg vers…

Hi all, i need a little help. On a CB2 powered from vbus and with a lipo battery i cannot shutdown in any way. When i issue poweroff command it reboots instad of shutting down. Tried also shutdown -h now. Any suggestion?

Hi, I am using orangepi+, i have a problem. My os version is Armbian_5.20_Orangepiplus_Debian_jessie_3.4.112_server. but, when i use reboot command, somtimes it's stopped, it's stop point is -> Starting LSB: set CPUFreq Kernel parameters... I don't know why it's stoped.. plz reply. Thanks.

It's possible I may have uncovered a bug. I'm having a problem getting a remote share to mount on boot. The mount is attempted before the network interface is ready and I've got `_netdev` on the required line in `/etc/fstab` . . . . //192.168.0.160/raspi /zeus/raspi cifs rw,auto,uid=1001,gid=1002,file_mode=0755,dir_mode=0755,_netdev,vers=3,credentials=/etc/.smbcredentials_raspi_01 0 0 Here is the part of `dmesg` that explains the issue better than I can: [ 41.572110] sun7i-dwmac 1c50000.ethernet eth0: PHY [stmmac-0:01] driver [RTL8211E Gigabit Ethernet] (irq=POLL) [ 41.574888] sun7i-dwmac 1c50000.ethernet eth0: No Safety Features suppo…

Hi guys. I am testing a NanoPi Neo for an IoT project. I ordered one with unsoldered ethernet and USB ports. I am trying to use a miniature WiFi adapter plugged in the OTG port while powering the board from either the debug +/- pins, or from the 5V bus on the GPIO. The problem is that no mater what option I choose, the board powers up just fine, I can login using the debug port serial-over-consolem however the WiFi adapter doesn't pop up in the lsusb list. Using an OTG USB hub with external power, fires up the WiFi, however this is the only working way and my project has to have minimum cable clutter. I need to be able to plug in the NanoPi Neo on a PCB using its GPIO …

Orange Pi Zero has two LEDs in the ethernet port and I want to control those leds for system notifications, right now I'm running OpenWrt on the OPiZ and I just need to know which file I have to trigger the LEDs. In GL.iNet router I can control the LEDs by doing echo default-on > /sys/devices/platform/leds-gpio/leds/gl-connect:green:lan/trigger But I don't know how to do that in OPiZ. Please tell me which file I have to edit in order to control the LEDs of the OPiZ

Hi, I have a question regarding the new Banana Pi (A20) boot script created in Armbian 5.25. Many months ago I switched my roots from the SDCard to the sata disk using the sata-nand-install script, after that I used to switch between SD and HDD and vice versa, mostly for maintenance operations on the HDD (sometime the system gets corrupted and I have to restore the HDD partition with e2fsck from the SD). Until Armbian 5.20 I used to edit the boot.cmd file pointing to the desired root device, recompile the boot.scr and then the system were loaded from the desired partition. Now with Armbian 5.25 I'm not sure which file I have to edit to …

Hi, to resume the problem I encounter please let me introduce the network I use. 1) a main modem/router called BBox2 which is a Sagem F@st 3464 connected in LAN-WAN to a 2) a secondary router called Lamobo R1 (also named Banana Pi R1 = BPi R1) 3) a laptop connected to the BPi-R1 4) I think to connect IP camera to the BBox2 then need to stay in the same network range (so I presume I need to change the conneciton used in 1) from LAN-WAN to LAN-LAN isn't it ?) Here is the connections and IP Addresses : BBox2 is connected in LAN-WAN to the BPi-R1 ISP -> BBox2 (LAN) -> (WAN) BPi-R1 (LAN) -> (LAN) Laptop 192.168.1.1 (DHCP->) 19…

Hey guys, I have a Banana Pro and recently switched to Armbian from Bananian. I boot from an HDD connected to the SATA port on bpi. Apparently the root fs is supposed to get resized to the max size(1TB in my case) during the first boot. But, well, it didn't work for me.. so instaed of 1TB I had 1.5 GBs. I wiped the partition in fdisk and created a new one using the old starting block(2048) but leaving the end to default. Result: I now have all the space available to me but everytime I log in it still says "90% of 1.5G". Why doesn't it scale?I know this is kinda ridiculous but I'm a perfectionist haha. ____ ____ _ ____ …

Of the 10 columns of output, only 4 seem to be working. Time, CPU Frequency, Load & Temperature. The other 6 columns seem wrong. I'm running Armbian_5.25_Orangepizero_Debian_jessie_default_3.4.113.img Running minerd --benchmark on the console and armbianmonitor -m in a ssh session produces this :- Time CPU load %cpu %sys %usr %nice %io %irq CPU 06:25:10: 240MHz 0.13 1% 0% 0% 0% 0% 0% 47°C 06:25:16: 1200MHz 0.36 1% 0% 0% 0% 0% 0% 64°C 06:25:21: 912MHz 0.65 1% 0% 0% 0% 0% 0% 68°C 06:25:26: 912MHz 0.92 1% 0% 0% 0% 0% 0% 65°C 06:25:31: 912MHz 1.17 1% 0%…

I am using an A20 micro with an old 10" LCD from Olimex, now discontinued, A13-LCD10TS All is working without problem but no touch screen. In old Olimex Wheezy image, touch screen was working with tslib. In new Armbian Jessie image there is no tslib and touch screen is not working. Also using modprobe ft5x_ts as suggested in this forum give an error message modprobe: ERROR: could not insert 'ft5x_ts': Operation not permitted FEX file seem correct and is same as old FEX used with Wheezy What I am missing? Regards Franco Spinelli

(Finally this forum lets me enter a new topic. It's failing most of the time, making it really hard to solve my actual problem if the infrastructure also fails.) I'm using an Orange Pi Zero board and try to make it talk to a radio module via SPI. The whole thing already works on a Raspberry Pi so the module and cabling is correct. But the module doesn't respond to requests on the Orange Pi. Since this doesn't do anything, I searched for issues like this and along the way found an SPI loopback tool. I tried it and it returned all zeros. The tool readme suggests that the MOSI and MISO pins are not connected, but they are. I checked and resoldered those pins and …

I want to put a banana Pi M1 plus a 2.5" SATA drive in a plastic box with only the ethernet and USB ports exposed. This means the onboard power button is not accessible to boot the board. Are you able to power on the board using the GPIO pins? If so please could someone advise which pins to connect to? I also aim to put a 5.5 x 2.1mm barrel connection on the box (with a latching press button switch for isolation) for the +5v supply and connect a short micro USB connector from the barrel socket to the board and also attach the SATA power leads directly rather than powering from the board 2 pin connector to take the load off the micro USB input.

Hello, I'm running ARMBIAN 5.25 stable with kernel 4.9.12-sunxi on my Cubietruck and I mostly use it as an AP. I've installed the "hostapd" package from the official armbian repository and it works fine until I want to connect more than 5 wireless clients. The kernel module used is "brcmfmac" provided by the armbian-firmware package. Is it an hardware limit and how can I bypass it if possible ? The working default config provided with hostapd package is below: ssid=ARMBIAN interface=wlan0 hw_mode=g channel=5 driver=nl80211 ctrl_interface=/var/run/hostapd ctrl_interface_group=0 logger_syslog=0 logger_syslog_level=0 wmm…

Using Armbian 5.33. What am I missing? I know the hardware is good as I've had this working before. The modules listed in /etc/modules include hci_uart which is missing. When and how is this built? It does not appear in the 3.4.113 kernel menuconfig options TAIA Jerry $ uname -a Linux nanopiair 3.4.113-sun8i #22 SMP PREEMPT Mon Sep 25 13:11:21 BST 2017 armv7l GNU/Linux # this did work! $sudo nmcli r wifi on $sudo nmcli dev wifi # lists available WAP's $sudo nmcli dev wifi connect <WAP name> password <your password here>

Hi, I have a orange pi pc. I tried the ubuntu xenial image (kernel 5.3.5) from the orange pi website and the armbian 5.8 image. I don't get vdpau working. It did not work out of the box in both images. So I tried to install the libvdpau-sunxi: http://www.orangepi.org/orangepibbsen/forum.php?mod=viewthread&tid=878 It compiled. Then I got the error that the cedar_dev dosn't exist. Then I found out that the mainline kernel doesn't have this module. So I tried this: https://github.com/uboborov/sunxi-cedar-mainline But I don't understand what I have to do there. Is there a current armbian image that has a working vdpau or can you…

Hello, Do you guys have some tips on reducing power consumption to an absolute minimum? I've made some progress and reduced it to about 500mW on idle. with some CPUs shut off. I would like to get it lower for battery saving. I'm currently building a custom image with as much of the functions I don't need (SPI, i2c, bluetooth etc) turned off hoping that I will get some more power savings. Not sure if this will make a difference yet. Ideas would be appreciated!

Hi Martin and others I started a new Thread because have problems using some third party interfaces with OrangePI running Armbian. Well.. In my project I need to communicate with 5 sensors which have UART output so I decided to buy a circuit (uart2spi) which work well if connected to Arduino. The Circuit description is available here: http://www.rowlandtechnology.com/projects/2015/09/25/spi-to-4-x-uart-bridge-multiuart-project/ First step: This is how I have connected the circuit to GPIO bus on my OrangePi pc.. The circuit has (from left to right) +3.3V pin, MISO, MOSI, SCK (clock), CS and GND.. I have connected…

Armbian_5.14_Orangepipc_Debian_jessie_3.4.112_desktop after upgrade sys not restart automatically

Hello, I am using Orange Pi PC Plus with Armbian Nightly. Since upgrade to kernel 4.11.0 audio stopped working, on kernel 4.10.11 everything was alright. When I am trying to open alsamixer i get error cannot open mixer: No such file or directory Can I fix it somehow? Can I still get last image with 4.10.11? Unfortunately it's not available at download page (too late).

This is on a fresh build of Armbian from source. I'm not seeing the camera appearing in /dev/video0, as you would expect. I've tried the solution that @sri suggested on this thread https://forum.armbian.com/index.php?/topic/3225-nanopi-neo-air-cam500b-issue/ but the device is still not visible. Here is the contents of my /etc/modules file #w1-sunxi #w1-gpio #w1-therm sunxi-cir hci_uart rfcomm hidp dhd g_serial ov5640 vfe_v4l2 And here is the output from dmesg [ 0.000000] Booting Linux on physical CPU 0 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux ve…

Anyone done kivy pip on Zero? Have problem with pip install kivy. Stuck on : /usr/bin/ld: cannot find -lGL collect2: error: ld returned 1 exit status

Hello world !, I am running bananapi and cubietruck boards on Ubuntu Thrusty and legacy kernel 3.4.109. I am using these board for remote servers but before critical upgrades like upgrade of kernel which can cause unusable system I need powerdown these boards and do backup of entire sdcards. But commands "poweroff" or "init 0" with battery connected everytime causes reboot on both of them while without battery connected these command shutdown boards properly. Any ideas ?

Hi All. May be I miss something but I do some searching and still can't understand. Problem configuration: Orange Pi PC v 1.2 (try 3 different) fresh loaded Armbian_5.90_Orangepipc_Ubuntu_xenial_default_3.4.113_desktop.img (try different SD cards) any (try 3 different HP 2824, Zyxel Kinect, Cisco SRW2016) If I plug my Orange Pi PC with this image to 1Gb port I'v got blinking of lights and dmesg: [ 818.090335] PHY: gmac0-0:00 - Link is Down [ 819.090497] PHY: gmac0-0:00 - Link is Up - 100/Full [ 821.090494] PHY: gmac0-0:00 - Link is Down [ 822.090314] PHY: gmac0-0:00 - Link is Up - 100/Full [ 824.090335] P…

I use your toolchain to build a Armbian_5.11_Orangepih3_Ubuntu_xenial_4.6.0.raw image, and then dd to SD card. Both OPi One and OPi PC can't boot it correctly. In the 1st time booting, the LED flashed for a while, and then re-boot automaticlly, and then in the 2nd boot and then, the serial port console only see this: U-Boot SPL 2016.05-rc1-armbian (May 09 2016 - 21:49:38) DRAM: 512 MiB Failed to set core voltage! Can't set CPU frequency Trying to boot from MMC1 U-Boot 2016.05-rc1-armbian (May 09 2016 - 21:49:38 +0800) Allwinner Technology CPU: Allwinner H3 (SUN8I 1680) Model: Xunlong Orange Pi PC I2C: ready DRAM: 512 MiB MMC: SUNXI SD/MMC: 0 *** Warni…

Hi! Thanks for your amazing work, i'd like to have knowledge to give a hand After a few problems I've been able to boot my new Orange Pi Prime, but no keyboard is working on it. I've tried with an USB keyboard and a bluetooh one, but there is no way to make them work. No clues on dmesg, lsusn looks fine... Any idea about hoe to debug it?

good night, is ethernet and usb a shared hub on Orange Pi Plus 2E and H3 SOC? i get max dl\up speeds on speeds tests and good write and read speeds but when i dl something it max at half my Internet speed thanks

I have Debian and installed Mate. I happen to install sv_SE.UTF-8 and en_US.UTF-8 but I cannot change languish on desktop from sv_SE.UTF-8 to en_US.UTF-8. First I just remove "sv_SE.UTF-8, but then the Terminal complain it did not find sv_SE, so install again. I generate the 2 locales, And thied to when I marked the local I want en_US, but it say sv_SE are active in Mate. I tried to run: sudo localectl set-locale en_US.UTF-8 Failed to issue method call: Access denied I don't find any "Languish controll" at all in Mate desktop It is right languish in terminal. Cheers Joni

Hello! Is there any way to config the frequency used by the DRAM driver when throttling takes place, or even better, disable the DRAM throttling at all? First of all, I have to say that that I'm pushing my Orange Pi Zero H3 board to run at very hot temperatures due to my CPU throttling settings so I can play some retro arcade games (I know I may burn it). But it seems the DRAM driver has its own throttling settings, and it takes place reducing DRAM frequency to 132Mhz. At such DRAM frequency there is flickering at HDMI output. May 13 18:30:31 inova-casa kernel: [15484.645810] [hotplug]: cpu(0) try to kill cpu(2) May 13 18:30:31 inova-casa kern…

Dear community, i've installed on my orangepi win plus the last armbian focal, and pulseaudio configuration tab don't gave me the possibility to choice output sound over hdmi to my tv screen . It seem as that no driver installed. Thanks for your help

I've installed Armbian again. Initially I logged in as root and 1234 password which worked. Then it asked to change the password. Something wen't wrong with it. My OrangePi PC boots fine and ok. When I open a terminal and try to do a "sudo this that" it asks my password and won't accept the one I gave, nor 1234. I've done the full installation a couple of times and same problem persists. How do I rest root password? The problem is that everytime I re-install everything and I'me at the very firts log (where I enter root and 1234) the screen scrolls so that I cannot see what it is asking since my monitor is 1600x1024. That I why I need to reset password afterwards. I…

I just run an "sudo apt upgrade" and my 22.05 system was upgraded to 23.8.1 As a result WiFi stopped working. The wireless interface disappeared and can not be configured with armbian-config. On the positive side it seems like the load bug is now fixed, load can now be 0.0.0 at its lowest as opposed to 1.1.1 before. is there a way to revert back to the old kernel with Armbian?

Hi Igor, I've installed a clean version of your image for BananaPi: Hardware: BananaPi Image-Version: 3.2 Kernel 3.4.108 Debian Wheezy Installed Packages: zip, unzip ftp dialog xorg lxde slim tightvncserver I get the following ErrorMessage: Boot Shutdown/Reboot: Can you help me? Steffen

Hi, after upgrading from Wheezy to Jessie (Legacy, i followed the documentation), everything is ok, except MOTD does not show TEMP, and other data as used in Wheezy, is this a known problem and how can i get back the old MOTD? Another question im struggling setting up slovenian keyboard layout any info on that? dpkg-reconfigure keyboard-configuration gives me an warning: root@bananapi:~# dpkg-reconfigure keyboard-configuration update-rc.d: warning: start and stop actions are no longer supported; falling back to defaults insserv: script ramlog.uninst: service ramlog already provided! update-rc.d: warning: start and stop actions are no longer supported; falling back t…

My Orange Pi PC2 work fine with Stretch (mainline, 4.14.48) between 35 and 65 °C. I got only a minor (but annoying) problem: the board start overheating after a shutdown (sudo shutdown -h now) and reach >70 °C after few minutes. Is it a kernel problem? Or a hardware design fault?

I just got a Nanopi NEO2 512MB, installed Armbian Ubuntu Bionic. It works fine, except for the DVB-T/C stick. It is affected by Kernel 4.10+ problems. I wonder if I can downgrade to an older kernel, like 4.4.0 for example, where everything works perfectly? If yes, how? There is a patch that perhaps would resolve the problem, how could I apply this patch to an of the available releases of Armbian? This patch Please, help me with this. Many thanks!

Sometimes it's unclear if my Nanopi NEO2 is still running, or fully locked up / FUBAR. Ping and SSH give no result. As there is no HDMI, I have no way to check if it's still there. So I was thinking: can I let the green LED flash each x seconds as a sign of life? Quote from Igor: "Both are accessible via sysfs, green is configurable while blue is not lit and reacting to anything. ". So a crontab script that writes something to /sys/ <LED> ... ? Feedback appreciated.

I got following error after boot mainline: brcmfmac: brcmf_cfg80211_reg_notifier: not a ISO3166 code (0x30 0x30) brcmfmac: brcmf_p2p_create_p2pdev_timeout occured brcmfmac: brcmf_cfg80211_add_iface: add iface p2p-dev-wlan0 type 10 failed: err=-5 How to fix it?

Hello, How can I play a video on the TV without a GUI/X11 installed? When I try mpv it says: mpv 05\ Oscillofun.mp4 [input/#1] Failed to read LIRC config file ~/.lircrc. Playing: 05 Oscillofun.mp4 [stream] Video (+) --vid=1 (*) (h264) [stream] Audio (+) --aid=1 --alang=und (*) (aac) File tags: major_brand: mp42 minor_version: 512 compatible_brands: isomiso2avc1mp41 creation_time: 2016-11-10 13:22:28 date: 2014-07-02T13:04:18+0200 encoder: HandBrake 0.10.5 2016021100 [vo/vdpau/x11] couldn't open the X11 display ()! Error opening/initializing the selected video_out (-vo) device. Video: no video AO: [alsa] 44100Hz stereo 2ch float A: 00:00:01 / 00:02:31 (1%) E…

Hi all, today I tried ubuntu xenial (dev) with kernel 4.9.4 for OrangePi Plus2. seems to work fine, but the screen resolution is 3840x2160. That is cool but a smaller resulution would be better. I tryed to change the screen settings over Settings -> Display, but it is not possible to change the values there. I also tried it with: sudo h3disp, but it is not installed on my system. What is the best way to change the screen res?

Hi, I had set up my orange pi pc a long time ago and kinda forgot about it. I am looking at upgrading from debian 8 to debian 9 and I am not sure how it works with armbian? Do I just change the sources.list from jessie to stretch? or do I need to do something special? sources.list deb http://httpredir.debian.org/debian jessie main contrib non-free deb-src http://httpredir.debian.org/debian jessie main contrib non-free deb http://httpredir.debian.org/debian/ jessie-updates main contrib non-free deb-src http://httpredir.debian.org/debian/ jessie-updates main contrib non-free # security packages come always from main repository deb http://s…

Hi, Just signed on - I've got Armbian running on my BananaPI (i.e. the original plain Jane BPi) - and liking it on there so far. So - I was impressed with Armbian on there - and shelled out and got the OPi+ 2E - flashed an SDCard with Armbian - booted up - and really liking it. Only got it yesterday (took like a month after arriving in the country [AU]). Did nand-sata-install, successful and rebooted - and now running Armbian off eMMC - runs sweet. Really impressed so far - VASTLY better experience than Pine64 (I'm looking for a desktop experience on Arm - for no other reason than "because it's there"). Got Chromium browser working - synergy KVM and Plan…

Hi Has anyone got the on board Bluetooth going on their OP Prime ?

Hi, unfortunately many times the support for XFS filesystem is just forgotton. At the moment I just run the last update for the cubietruck this morning which includes the new kernel version 4.19 and my system, which is used as an NAS device with XFS filessystem, didn't start again. I found out that this filesystem is not supported anymore (see 'cat /proc/filesystems') and no module is available. Could you plaese take care of this to fix this issue in the future? And/Or tell me please how I can get back to the older version of the kernel which supports XFS. The reason why I say this way is because I cannot spend every time hours or day's f…

My docker build dev 5.0.y is not booting from sd card. U-Boot SPL 2019.01-armbian (Mar 16 2019 - 05:27:40 +0000) DRAM:This DRAM setup is currently not supported. resetting ...

Hi, I use three ZeroPi hosts as USBIP hosts top just offer USB devices. The kernel till last update on one device was Linux usb2 5.10.43-sunxi #21.05.6 SMP Mon Jun 21 15:07:45 UTC 2021 armv7l GNU/Linux and the new kernel on the once device that makes issues now is Linux usb3 5.10.60-sunxi #21.08.2 SMP Tue Sep 14 16:28:44 UTC 2021 armv7l GNU/Linux The issues are that one of the USB devices become unavailable after some hours and I see this in the syslog: Spoiler Oct 13 18:36:39 usb3 kernel: [43038.026466] usbip-host 4-1.1: failed to unlink 1/1 urb of seqnum 354788, ret -43 …

Hi I connect 7" hdmi display from waveshare to orange pi one on mainline dev kernel. http://www.waveshare.com/wiki/7inch_HDMI_LCD When it is powered before orange, it works ok. But it don't work if it is powered at the same time. I am tried to add hpd_delay at the top of boot.cmd: setenv video-mode sunxi:1024x768-24@60,monitor=hdmi,hpd=1,hpd_delay=20000,edid=1 saveenv the do mkimage -C none -A arm -T script -d /boot/boot.cmd /boot/boot.scr But still no lack, display shows "no cable connected" Also when board start up, u-boot show on serial console this if display…

Hello, and thank you for your great work on Armbian. I have a BananaPi running on Armbian 5.38 Debian Stretch, downgraded to 5.31 due to freezing problems. i would love to use a 5" 800x480 HDMI connected "china"-Display with the BananaPi. Unfortunately it doesn't provide any EDID infos. I managed to set the resolution to 800x600 with an overscan_y=120 in boot.cmd, setenv video-mode sunxi:800x600-24@60,monitor=hdmi,hpd=0,edid=0,overscan_y=120 to see a approximately matching console screen. But the display is somehow not correct, wrong colors and no sharp characters. The only resolution with correct colors and sharp characters was…

Clean system does not start after migrating to SSD using armbian-config. Bootlog: Spoiler U-Boot SPL 2020.10-armbian (Aug 08 2021 - 14:54:07 +0200) DRAM: 2048 MiB CPU: 912000000Hz, AXI/AHB/APB: 3/2/2 Trying to boot from MMC1 U-Boot 2020.10-armbian (Aug 08 2021 - 14:54:07 +0200) Allwinner Technology CPU: Allwinner A20 (SUN7I) Model: Cubietech Cubietruck I2C: ready DRAM: 2 GiB MMC: mmc@1c0f000: 0, mmc@1c12000: 1 Loading Environment from FAT... Card did not respond to voltage select! Setting up a 1024x768 vga console (overscan 0x0) In: serial Out: vga Err: vga Allwinner mUSB OTG (Peripheral) Net: eth0: ethernet@1c50000, e…

Hi, I generated SD images for A20-OLinuXino-Lime2-eMMC boards. Kernel is 4.6.2, Debian wheezy, u-boot 2016.05 On my last two images (generated with slight differences in u-boot configuration), the first time I booted, everything worked fine. After that, I installed a booting system on the eMMC of the card. After few boots, (on the same board) the first SD card hanged (several minutes) just after displaying: random: nonblocking pool is initialized The other card continued to work (booting did not hang). A few hours later, I copied several files into a /data directory (.deb files). Trying to boot that second card, it ran in the same blocked statu…

Hi. I want to install RTL8188fu on this orange pi pc but I have no luck. Bus 003 Device 005: ID 0bda:f179 Realtek Semiconductor Corp. RTL8188FTV 802.11b/g/n 1T1R 2.4G WLAN Adapter I'm using this repository https://github.com/kelebek333/rtl8188fu , but....: orangepipc:~:# sudo dkms install ./rtl8188fu Creating symlink /var/lib/dkms/rtl8188fu/1.0/source -> /usr/src/rtl8188fu-1.0 Error! Your kernel headers for kernel 5.15.93-sunxi cannot be found. Please install the linux-headers-5.15.93-sunxi package or use the --kernelsourcedir option to tell DKMS where it's located. sudo apt install linux-headers-$(uname -r) Reading package lists…

Hello, I am just trying to set up a pcduino3 nano with Debian Jessie. I downloaded 4.9.7 and put it onto SD card, booted, logged into my sudo account, and then apt-get install lightdm followed by apt-get update apt-get upgrade as per "Getting Started" guide. I now have 4.9.12 LIghtdm fails to start with following message: systemctl status lightdm.service -l ● lightdm.service - Light Display Manager Loaded: loaded (/lib/systemd/system/lightdm.service; enabled) Active: failed (Result: start-limit) since Tue 2017-03-07 21:41:18 CET; 17min ago Docs: man:lightdm(1) Process: 1460 ExecStart=/usr/s…

Hello Folks! Already successfully running an RTL-SDR device (for Flight Tracking) and U-Blox NEO-6M GPS (for GPS/NTP) on my Orange Pi PC Plus, and now wanted to try a BME280 weather chip, but ran into problems talking to it. The 'i2cdetect' seems to be working fine: darren@frodo10:~$ sudo i2cdetect -y 0 0 1 2 3 4 5 6 7 8 9 a b c d e f 00: -- -- -- -- -- -- -- -- -- -- -- -- -- 10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 30: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 40: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 50: -- -- -- -- -- -- -- -- -- -- -- -- -- -- …

Thanks for providing the new Buster image (5.4.7) for Orange Pi One Plus. All the essential stuff works well, giving me new software possibilities. As a technical feedback, I'd just like to mention 1) the red light keeps shining (instead of turning green, but Armbian runs very well, anyway) 2) an attached monitor doesn't receive any signals (but I prefer SSH anyway) 3) the console keyboard layout wouldn't accept any changes (but using SSH, that doesn't make any difference now). Everything else in armbian-config worked fine. Great tool!

Hi, I'm using a cubietruck and bananapi board (both A20 devices) for a long time (They run very stable for many years). I'm using uart3 for interfacing with arduino boards using the kernel overlay. When I upgrade the kernel to a version 5+ the overlay does not work anymore and ttyS3 is not working and missing in dmesg. The behaviour is the same on both boards. Autoboot in 1 seconds, press <Space> to stop switch to partitions #0, OK mmc0 is current device Scanning mmc 0:1... Found U-Boot script /boot/boot.scr 3708 bytes read in 34 ms (106.4 KiB/s) ## Executing script at 43100000 U-boot loaded from SD Boot script loaded from mmc 217 bytes read in …

Hi, We've built a network experimentation system using NanoPi R1 modules, but when load testing the system with iperf3, we are seeing the on-board RTL8152 interface enter a state where it does not seem to be responding until the board is power cycled. The system consists of 32 NanoPi modules connected in a torus, with the 1Gig interface connected to its neighbour's 100Mbit interface. An additional USB Ethernet dongle functions as a control interface. The modules are powered from a Ubiquiti PoE switch, using this type of isolated PoE splitter. Eyeballing the switch UI, power consumption per node seems to hover between 2.3W-3.5W, depending on load. W…

I am working on a project with armbian 23.8.1 embedded in a banana pi m2 zero. I need to use the spi 0 with the two select chips. When I initialize I can only initialize spidev0.0 or spidev 0.1. There is no way that can initialize both. Configure the armbianEnv.txt file with the following parameters: overlays= spi-add-cs1 spi-spidev param_spidev_spi_bus=0 param_spidev_spi_cs=1 Also try other combinations and nothing. Then try to modify the .dtb file by adding cs-gpios and changing status = "okay" but it doesn't work

Hi, I have a BananaPi Pro with A20 cpu. I try to install Motion and Motioneye but it fails. I found some tutorials but nothing worked for me. Is there any proper tutorial about how to install it? Thanks.

Is it possible to turn off / on the voltage (5V) GPIO from the command line ? .... So turn off eg 16x2 LCD power ....Is it possible only physically eg disconnecting the cable ( 2 , 4 - GPIO)

Is it possible to boot Orange pi Zero directly from hdd. I have sata hdd attached to OPI Zero via PI NAS. I can boot from usb flash and use HDD as root device but faild to boot from HDD directly. Is it possible to do this or not.

Hi, anyone have already connected a speaker to gpio of lcpi h3 v8 (like orange pi pc). I have tried but im not sure if i2s is enabled on armbian

Hello, I'm trying to connect an PCF8574 I2C adapter to my Orange Pi, but it doesn't show up in i2cdetect, only something at 0x30 on i2c0 and 0x36 on i2c1 that is labeled UU. I tried to connect it to arduino, and it found it on address 0x27 Connected on pins 3 and 5 root@orangepizero2w:~# sudo i2cdetect -y 0 0 1 2 3 4 5 6 7 8 9 a b c d e f 00: -- -- -- -- -- -- -- -- 10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 30: 30 -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 40: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 50: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -…

Hello, please help me. There Cubietruck. I can not load the SD card. Image "img" recorded via Win32Imager and tried Linux "dd", loading stops at the "Starting kernel", then begins again. Before that installing Lubuntu to NAND with Phoenix tools. Without SD card Lubuntu starting normal. Please tell me how to boot from an SD card, and tried Debian wheezy and Ubuntu trusty, the result is the same. ps. Sorry for the bad language

HI, On my cubietruck I can boot form sd card my filesysteme on SATA. But y can't boot form nand. I must use kernel 3.4.108 because alsa spdif pass trought do not work on 3.4.109. I can't use nand install script because it formating sata drive. here /boot : drwxr-xr-x 4 root root 16384 Jan 1 1970 ./drwxr-xr-x 23 root root 4096 Sep 6 09:46 ../drwxr-xr-x 2 root root 2048 Nov 11 15:33 bin/-rwxr-xr-x 1 root root 118912 Nov 18 2014 boot.axf*-rwxr-xr-x 1 root root 1745 Nov 11 15:30 boot.cmd*-rwxr-xr-x 1 root root 106 Nov 18 2014 boot.ini*-rwxr-xr-x 1 root root 1817 Nov 11 15:30 boot.scr*-rwxr-xr-x 1 root root 97046 Oct 14 20:33 config-3.4.1…

Good time of day fellows. How can I mount SD card to transfer data into when Armbian 3.35 Ubuntu 16.04 started from flash? Cant see SD card nor mount it. Installed USBmount and it works with USB flashes on OTG port but no with SD card. Thanks to anyone for advice. Additional info: NanoPi Air 32Gb eMMC http://sprunge.us/OLNS

Hi, Firstly my thanks to the team for an outstanding job on ARMbian. I'm relatively new to this particular flavour, using it on my Orange Pi H2+ board with a few different builds under my belt now. Recently I have been having some troubles getting Pi-hole to work on the little Orange Pi board. Twice I have had it up and running perfectly, with full DNS and DHCP control of my home network, accommodating about 10 devices. However after about 6 - 12 hours of operation, they ceased to function. First time around I was not home to witness it, but when I returned later, the Allwinner chip was running pretty warm (around 60 degrees C core temp) and non-responsive, even to s…

Can we switch a 64 bit image from downloads section to 32 bit kernel, repos and apps? I want a 32 bit (armhf) build server, but can see 64 bit OS images only. Do I need to build my custom armbian image? Are there command line examples for build script that produces armhf image instead of aarch64? I prefer H6 SoC instead of H3 because H6 is two times faster than H3, but the price of H6-based boards is very similar to H3-based boards. Thanks in advance