Allwinner sunxi

Got Orange Pi Plus 2 and LCD 5"monitor Waveshare. Use armbian OS 5.14 on Debian Jessie 3.4.112. All good with 800x480 resolution, but still cant use touchscreen. Will be happy if you help me with it: Monitor got interface 1, 17 3.3V Power positive (3.3V power input) 2, 4 5V Power positive (5V power input) 3, 5, 7, 8, 10, 11, 12, 13, 15, 16, 18, 24 NC NC 6, 9, 14, 20, 25 GND Ground 19 TP_SI SPI data input of Touch Panel 21 TP_SO SPI data output of Touch Panel 22 TP_IRQ Touch Panel interrupt, low level while the Touch Panel detects touching 23 TP_SCK SPI clock of T…

Hello, I tried several times to install debian in eMMC on Lime2, using nand-sata-install, without success, getting with the message : "There are no targets. Please check your drives." Note that on the same board, the official debian image provided by Olimex is working and can be installed in eMMC Checking with "dmesg | grep mmc", I don't find mmcblk1 (only mmcblk0). I tried with 3.4.112 image from armbian (also with 4.5.2). I installed a lot of images on Lime2 in NAND, so I'm not so unexperienced, but I don't understand where I'm wrong (or what I don't know) Thanks for any help ! Regards,

Cannot open this file: http://mirror.igorpecovnik.com/Armbian_5.14_Orangepi_Ubuntu_xenial_4.6.2.7z From http://www.armbian.com/orange-pi/ MD5 is: aed2af7290cc645ba7282d5fa78766a9 Please, reupload it

Greeting, I installed the OrangePI plus image (desktop) on my Orange PI plus2. It seems to work fine but I can't get any video output. I tested with several h3disp settings, with a HDMI to VGA adapter then with an HDMI to DVI adapter, and finally on the A/V port. I have no hdmi screen to test direct connection without adapters. Ideally I would like to use the HDMI to VGA adapter. any ideas ?

Hi, I've recently acquired some nanoPi M1, and just about now installed ARMBIAN. However I can't seem to get any sound working via 3.5 analog jack. Volume is set right on alsamixer Speaker are working and volume is set at max Soundcard is listed but yet I have absolutely no sound ... any ideas ? root@user:~# aplay -l **** List of PLAYBACK Hardware Devices **** card 0: audiocodec [audiocodec], device 0: SUNXI-CODEC sndcodec-0 [] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: sndhdmi [sndhdmi], device 0: SUNXI-HDMIAUDIO sndhdmi-0 [] Subdevices: 1/1 Subdevice #0: subdevice #0 root@user:~# cat /proc/asound/cards 0 [audiocodec ]: audiocodec -…

Hi, I tried to use default audio device, audiocodec hw:0,0 with arecord to record some sounds from mic. The file contains some noise. Any ideas how to activate mic?

So iwe been trying to solve this issue by experimenting and iwe hit a wall where i do not know what to do so i guess i'm just hoping someone would spot what i'm doing wrong. So i bought an "Orange Pi PC" from ebay and i'm trying to set it up without much sucess. I downloaded the "Armbian_5.14_Orangepi2_Ubuntu_xenial_3.4.112.raw" image from the armbian webpage. ( I also did my Cubieboard wich worked fine with the same steps. ) The commandline i used to write the image to an sdcard is this: sudo dd if=./Armbian_5.14_Orangepi2_Ubuntu_xenial_3.4.112.raw of=/dev/sdc bs=1M oflag=direct sudo sync And then i unplug the sd card and put it into my OrangePi and when it boots the g…

Hi, I've got: My problem is: - no spdif. Why? Script.bin is ok. It seems that the driver is not built into the kernel... Please help.

Hi I'm an happy user of : Armbian_5.14_Orangepipc_Debian_jessie_3.4.112_desktop.7z. I don't know if it is bad luck or some obscure legal reason but 2 of my USB dongles needed to add firmware files from other distributions before they worked perfectly: They are : TerraTec Electronic GmbH Cinergy T RC MKII using dvb_usb_af9015 missing dvb-usb-af9015.fw 15913 bytes from 30/03/2015 Ralink Technology, Corp. RT2501/RT2573 Wireless Adapter using rt73usb module missing rt73.bin 2048 bytes from 24/11/2014 I hope those files can be added to ease the life of newbies.

Hi All! Legacy kernel says: "Enabled audio devices: analog, 8 channel HDMI, spdif and I2S (if wired and enabled in HW configuration)" But there is no multi channel device listed in aplay -L , like surround51, surround71, etc. With "speaker-test -D default:sunxisndhdmi -c 6 -t wav", We got a downmixed stereo result. Receiver device is a BEM-182 Broadcast Monitor on its HDMI input - only 2 VU-meter band appears. Other test setup is the same receiver in SDI input mode with an HDMI to SDI converter. Specs of this adapter declares that it supports 8 channel, and this time 8 VU-meter band appears on the monitor so device is ready to receive multi-channel audio, but…

There is no one who has to compile the 2.9.8.3 version of snort? Thank you

Hi, I'm trying to make my opi one act as a keyboard. I've found that I need to activate g_hid module, but when I trying to execute: modprobe g_hid it says: modprobe: FATAL: Module g_hid not found. Also, g_ether, g_mass_storage, g_multi, g_ptinter and g_serial modules are available. So, what should I do and maybe anyone can provide me an example how to send a keystroke to my pc? Thanks.

I've installed Jessie vanilla server. Then i did a: apt-get -y install xorg lightdm xfce4 tango-icon-theme gnome-icon-theme (armbian.com/documentation) But there is no xorg.conf. root@cubietruck:~# find / -iname xorg.conf root@cubietruck:~ Where do I put the X11-Section needed for the Calibration of my Touchpad-Display? TIA

Hi and sorry for this questions. I buy this board, and now i need an working image with wifi. thanks for an answer.

Hello, im new to linux and armbian systems, but im really interested in the topic, recently im working with an a20-Olinuxino-Lime2 , and my goal was to put another OS, for that i followed some tutorials to install a Linux Mate system on the sd card, i configured it to access the internet thought my router but after a point that i changed the kernel , i lost connection to the internet, all my "interfaces" files are the same and i can ping to my router, but i cant ping from my computer to it booting up it gives some errors opening lib modules: systemd-udev(439) could not open builtin file : "/lib/modules/3.4.109-sunxi/modules.builtin.bin" modprob : ERROR: ../lib…

Hello, JiveLite would be nice for LMS-installation with Touchscreen/Display. http://forums.slimdevices.com/showthread.php?98156-Announce-JiveLite-cut-down-squeezebox-control-application Has anyone of you ever successfully compiled JiveLite? TIA Jochen P.s.: With a little help from google translator. Edit: Well, I did it!

I tried changing script.bin/fex > usbc0 (settings) with many combinations but was not able to get the USB port working as genreal USB host ... so what am i missing ? Target Board :- Banana Pi. Target Os :- 3.4.112 (Armbian_5.10_Bananapipro_Debian_jessie_3.4.112_desktop)

Hi all, yeterday i connected a lipo battery to my cb2, made some stuff and then shut down. Today i've found my battery totally discharged so I started investigating. I've found that even if the system is shutdown i can measure about 4.5V on ipsout. I verified also the same situation on my second cb2. Searching on the web i've found this post. Any of you could confirm, please?

I have searched the forum and the internet and am having a lot of trouble finding a guide on how to covert the OTG on my OrangePi One to a USB port. (I am assuming it is possible to do.) I believe the current configuration for the OrangePi One is one usb and a OTG. I would also Like to be able to use the OTG as a USB port when I run OpenElec as I would like the second USB to plug in the new Optional Bluetooth dongle. Seasalt

Hi ALL, i've problem booting Armbian from SD. Tried to do workaround: 1. boot linaro from SD 2. put tar Armbian Jessie archive to /armbian folder 3. bind /dev, /sys, /proc 4. chroot in armbian folder 5. changed nand1 and nand2 to the nanda and nandb in script 6. started nand-sata-install.sh 7. it installed system on nand. Process finished smoothly. unchrooted. Powered CT off. After power it on have a green LED lighting. CT not booting. Gents, please any ideas? What i missed in procedure.

Good day friends! I have Orange Pi PC and I decided to try Armbian. Excellent build! My congratulations to the developers Before, I used the image of 'loboris'. I had a problem with the management of the LED in Armbian. How to make u-boot turn red led to the kernel boot? Edit fex file no avail

I bought some 7 inch HDMI screen(800*480 manufacturer-Alientek) with USB controlled touch screen.( http://www.aliexpress.com/item/New-7-inch-USB-Capacitive-Touch-Screen-LCD-Display-HDMI-for-Raspberry-Pi-Pi2-Wholesale/32607731510.html ) HDMI screen can be displayed on Orange Pi One (Armbian 3.4.112-sun8i) using h3disp command. Touch screen could not work on Orange Pi, but that works on linux i386(4.2.0-38-generic). The symptom is as follows. Touch screen is defined ad /dev/usbdev*.* on Orange Pi. but on linux i386 is defined as hidraw device. (I will use uinput or uhid handing this touch screen). ==== orange pi ===== 1)dmesg [ 194.360084] usb 6…

Hello, i am having a problem with my Orange Pi the download speed is very slow. In Deluge and by wget i get normal DL speed around 9Mb/s (i have a 10Mb internet). But in JDownloader and in builit-in web browser i get around 100Kb/s. Any idea how to solve this issue? I want to make a download server using OPi but this issue is stopping me from doing that. I am running the newest Armbian Desktop

Hi. i tried to use g_ether module on legacy 3.4.112 kernel but without success. Could anyone help me? this is what i have when i run modprobe g_ether: [sw_udc]: [sw_usb_udc]: binding gadget driver 'g_ether' [sw_udc]: alloc request: ep(0xc0a8b7e8, ep0, 64), req(0xef3c8940) WRN:L2728(drivers/usb/sunxi_usb/udc/sw_udc.c):ERR: usb device is not active <4>g_ether gadget: using random self ethernet address <4>g_ether gadget: using random host ethernet address <6>usb0: MAC 5a:1d:b8:22:02:7f <6>usb0: HOST MAC 6e:49:95:27:67:f7 ep_matches, wrn: endpoint already claimed, ep(0xc0a8b834, 0xeeb62480, ep1-bulk) ep_matches, wrn: endpoint already cl…

Hey Community! I installed Armbian Jessie without any problem to SD Card. HDMI was the default screen output, and I changed to VGA with the help of this topic: http://forum.armbian.com/index.php/topic/445-debian-images-cubietruck-vga-output-problem/ The next boot went fine, VGA works. But, after the system upgrade-update, after the reboot the screen is HDMI again. I checked the card's file system with NAND ubuntu, the output order (the 4 row) is 4-4-4-4. So, I can't understand. The VGA monitor is fine, working in the next few phase before the kernel starts, but after that: just blinking. If I connect the Samsung HDTV, the desktop present there.... Thanks for t…

Hi, I can't seem to mount any drives with journaled user/group quota. I just get this error: root@bananapipro:~# mount -o rw,defaults,nofail,user_xattr,noexec,usrjquota=aquota.user,grpjquota=aquota.group,jqfmt=vfsv0 UUID=56790abd-531d-43b7-8cf8-9bfc85105f6a /media/56790abd-531d-43b7-8cf8-9bfc85105f6a mount: wrong fs type, bad option, bad superblock on /dev/sda1, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so. If I run the mount command without the quota stuff the drive mounts without any problems and is browseable.

Hello, ... Guys, . did someone had problem with ETH0? I tried on many distributions, . and always ETHO (LAN port) is dead. Any suggestions?

Hello, I have done my iso with script yersterday and when I start the Orange Pi Plus 2 the yellow led appear but nothing else doing ... Why ?

I installed armbian latest release. When i shutdown system desktop closed. After 1-2 seconds, desktop opened again And after 1-2 seconds closed again. Why desktop is launched again after closed? Is it a problem? How can i fix that?

Hi, I have Cubietrauck and I installed legacy Jessie on SD card and after configuration hostapd for using it as access point only 5 devices were able to connect to my device. After search I’ve added max_num_sta=20 but it didn’t solve my problem. I tried to use other distribution like vanilla Jessie and vanilla trusty server but I had same problem. Here is my hostapd configuration: How can I change max devices connection? Is this problem relate to the wifi module and how can I fix it?

Hi Community, I'm having problem loading armbian images from SD card. Is there nand image for CT? Thank you for reply in advance Gary

Hello, i recently installed armbian on my newly bought Lamobo R1. Everything is working fine so far but for the onboard ethernet LEDs, they're not working as expected. The green LED on port 3 of the internal switch (also known as wan port) ist constantly on, no matter if there is a cable plugged in or not. The orange LED is always off. After some trial and error if figured out that on the other 4 ports the green LED, for the specific port, shows the current network traffic (is blinking) if the established connection is 10Base-T. If the connection is 1000Base-T, the orange LED shows the current network traffic and if the connection is 100Base-T no led is on or sh…

Hi, I generated SD images for A20-OLinuXino-Lime2-eMMC boards. Kernel is 4.6.2, Debian wheezy, u-boot 2016.05 On my last two images (generated with slight differences in u-boot configuration), the first time I booted, everything worked fine. After that, I installed a booting system on the eMMC of the card. After few boots, (on the same board) the first SD card hanged (several minutes) just after displaying: random: nonblocking pool is initialized The other card continued to work (booting did not hang). A few hours later, I copied several files into a /data directory (.deb files). Trying to boot that second card, it ran in the same blocked statu…

Dear All, I wonder if its possible to boot the Orange PI One from USB without an SDcard. 1, In the description I found (http://www.orangepi.org > Linux Distributions for Orange PI H3 boards ) that "cmdline.txt must exist on BOOT (fat) partition on sd card "... for me that means I always need to have the sdcard there to be able to restart? 2, I read some other posts ,which use one or other way U-Boot... would it help and how it should go step by step to make it work. 3, Or is there any other possibilities to make the PI One boot/work without populating the SDcard at all? 4, Under the description on the "http://www.orangepi.org> Linux Distributions for Oran…

Hi, after some days with other projects I have updated to newest master and now see this message during installation: [ o.k. ] Installing extra applications and drivers [ o.k. ] Installing linux firmware [ 5.14 ] dpkg: error processing archive /tmp/armbian-firmware_5.14_all.deb (--install): cannot access archive: No such file or directory Errors were encountered while processing: /tmp/armbian-firmware_5.14_all.deb [ o.k. ] Installing [ armbian-hostapd-jessie_5.14_armhf.deb ] invoke-rc.d: policy-rc.d denied execution of stop. dpkg: error processing archive /tmp/armbian-hostapd-jessie_5.14_armhf.deb (--install): cannot access archive: No such file or directory E…

Hello! Does anyone know how make hardware reset of the Pi one board?

Just started with Orange PI PC and I tried to use a KeDei LCD touchscreen V5, since I used with with my Raspberry Pi. Unfortunately the given driver (http://kedei.net/raspberry/raspberry.html) doesn't work with Armbian. Is there support in Armbian for this new (may 2016) LCD touchscreen or do I have to (re)compile the kernel myself? (not knowing where to begin...) Regards, Don

Hi, I would like to establish communication between Pi One and a computer through OTG Usb to USB. My goal is to use it to create a serial communication between the PI One and the computer to be able to send quick strings from the PC to the PI. I have a program which only communicate through serial com port and I would like to feed it with data from the PI. Is it possible... to use the physical interface to communicate? Is it possible to establish serial communication between them? I would be very grateful for any extensive help. Thanks in advance! Hi again, I don't think I got closer to the solution... I don't want to use the debug port or th…

Hi everyone, I'm trying to connect Tiny LCD to OrangePiOne. I bought this cheap LCD display with touch panel. http://www.aliexpress.com/snapshot/7757492669.html?orderId=75894630877559 --My environment-------------------------------------------------------------------------------------------------- Orange Pi One Armbian Jessie Desktop with legacy kernel DS1302 RTC module(work with WiringOP) 720p DVI Display 2.8" SPI Serial Port 240x320 ILI9341 TFT LCD Display Screen Touch Panel Backlight Module ------------------------------------------------------------------------------------------------------------------------ I connected and tried to configure the L…

OPI pc frequently hangs when transferring from or to file from any usb hdd. OPI PC freezes and never become operative till power shut and boot. kindly post any remedy. rizwan

Armbian_5.14_Orangepipc_Debian_jessie_3.4.112_desktop after upgrade sys not restart automatically

Hello guys ! 1) New SD card 16 Gb 2) Install on it armbian 5_14 desktop 3) Install apache 2 reboot ---> OK 4) install mysql server and client reboot ---> OK 5) install php5 reboot ---> OK 6) install phpmyadmin reboot ---> OK 7) install java8 reboot ---> OK 8) install netbeans 8.1 + plugins reboot ---> OK 9) install other programs and services reboot ---> OK 10) install igorpecovnik/hostapd reboot ---> Problem as I told in other post This happens three times today , to be sure before write that. So pratically this is the price to pay if I want an access point ? :( What I have to do ? …

After some crashes and hard shout down my orange pi pc stuck on systemd services during boot after checking it seems file system has some problems. Then I try run fsck on root device by sudo touch /forcefsck but it did anything and dont run fsck after reboot no prompt on display and fsck log files are empty: cat /var/log/fsck/* any way I try to enable fsck by editing : nano /etc/default/rcS and set : FSCKFIX=yes and also try set in file system : tune2fs -c 1 /dev/mmcblk0p1 and all my attempts failed Igor please help

I tried as described in the manuals Lubuntu: 1)sudo apt-get update 2) sudo apt-get install plymouth-theme-* 3) sudo update-alternatives --config default.plymouth 4) sudo update-initramfs -u As a result, all the same boot black console rather than graphical theme. Please help us understand how to make the graphics theme at startup and reboot.

Hi All, I'm using Armbian_5.10_Micro_Debian_jessie_3.4.112 on a custom A20 board with NAND based off the Olimex A20 Micro. I don't see /dev/nand on it. $ zgrep NAND /proc/config.gz CONFIG_SUNXI_NAND_PARTITION=y CONFIG_SUNXI_NAND=y # CONFIG_SUNXI_NAND_COMPAT_DEV is not set # CONFIG_SUNXI_NAND_TEST is not set I even tried to Livesuite an Android NAND image, but it also failed. I'm pasting the logs below. What does it generally mean to have a missing /dev/nand? Thanks. $ sudo ./LiveSuit.sh Starting x86-64/LiveSuit. library file path: /home/asrolabe/Downloads/sunxi-livesuite/x86-64/plgvector.dll library file path: /home/asrolabe/Downloads/sunxi-livesuite…

Hello, I've just purchased a PCduino3B. I installed Armbian (Jessie Desktop) on it. Since I've done this I have the issue of the HDMI signal dropping out occasionally. This has happened with 2 different HDMI cables and 2 different monitors (one an actual PC monitor, the other my Panasonic Plasma TV). Has anyone else come across this issue before? Is there anything I can check? Also I'm having trouble getting the wired network to connect using the WICD Network Manager (The Wifi connects OK). Is there anything I can check here? I haven't used Linux for many years and am very rusty on troubleshooting issues. Many thanks in advance for your help. No.42

Which system to install on Orange Pi Plus 2 ? http://www.armbian.com/orange-pi-plus/???

Hi all, i need a little help. On a CB2 powered from vbus and with a lipo battery i cannot shutdown in any way. When i issue poweroff command it reboots instad of shutting down. Tried also shutdown -h now. Any suggestion?

Hi, first post here, so a bit of context: I have owned my Orange Pi PC for a while and have it set up running the latest Armbian with legacy kernel, serving files over AFP and SMB on the local network and running a Transmission daemon. I set it up with the desktop image but followed the instructions in the documentation to remove the desktop environment etc. I believe that this has left the VDPAU and Cedrus related files intact. As I am using it as a media server I thought it would be interesting to leverage the H3's capabilities of encoding H.264 to convert old DivX files into a more modern format, but none of the solutions I have found for this work correctly. It seems…

Hi, i'm working on a hdmi cec driver for H3 and i'm looking for some feedback how the driver works. I have tested the driver with OrangePi PC and a Samsung TV. I have pushed my driver to github : https://github.com/jodamm/linux/tree/sun8i or here is a patch file that can be placed in userpatches for armbian toolchain. The driver can be loaded with modprobe hdmi_cec . I have modified libcec to work with this driver : https://github.com/jodamm/libcec or again a patch file for libcec.

I have a cubieboard2 (A20 - sunxi 7i) and i have attached an Foresee EMMC to it and i am able to boot a customised Sunxi-Kernel (3.4.104) from it. I also have an SDCARD with Armbian (Legacy) Jessie which also boots fine. My question is what do i need to do in order to get Armbian (legacy) Jessie to be able to mount the emmc? When i boot up Armbian via the sdcard, i can't see the emmc. Am i doing something wrong, or do i need to make some changes to the .fex file? Should i use the Armbian tool to make changes to the .fex file and roll a new u-boot, if so, can you guide me as to what changes i need to make in order to see both the sdcard and emmc flash devices from…

Maybe this is not strictly related to Orange Pi PC but a few weeks ago I had problems with booting my device - mainly OpenELEC and I had to debug it somehow using serial port and the terminal. Unfortunately my PC is rather far from the place where I keep OPiPC. So I was forced to prepare separate device - cheap STM32 MCU based terminal display with 2.2" LCD screen directly supplied from Orange Pi PC 3.3V. It can be used also with other devices which allow serial console debugging. Watch below videos for more details and the code: Maybe someone finds it useful.

For some days now I have the board mentioned in the subject, the goal is to have a webserver, git server, and maybe lateron something like a mini-personal-cloud for my family. Yesterday me and my brother finally decided which OS to use - and dd-ed the SD card with the Armbian/Debian Vanilla Jessie Server image (Armbian_5.10_Lime2_Debian_jessie_4.5.2). Some hours later after installing apache2 and trying things out I thought it would be a good idea to do an apt-get upgrade for security reasons before exposing the server to "the world". Unfortunately it was not: The device is not booting any longer after the upgrade. This is the log output of /var/log/apt/term.log (I moun…

Hey there, I have managed to compile your great image. How ever I dont receive any HDMI signal on boot. During the first boot I got atleast some picture. but after loading kernel all went black. See log: https://sprunge.us/YjQd I used a] HDMI to VGA converter b] a direct HDMI connection. Both screens usually work. See log: https://sprunge.us/YjQd I will continue to install the system via SSH, however I would like to use HDMI lateron e.g. in emergency cases. Greetings!

Hi, I have tested this issue : https://github.com/linux-sunxi/linux-sunxi/issues/244 apparently it is not resolved. kernel panic log : [18109.785618] ------------[ cut here ]------------ [18109.790613] kernel BUG at arch/arm/mach-sun7i/dma/dma_core.c:32! [18109.795412] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP ARM [18109.797259] Modules linked in: disp_ump mali_drm drm mali ump cpufreq_userspace ap6210 sunxi_ir hidp rfcomm hci_uart bluetooth sg [last unloaded: scsi_wait_scan] [18109.813725] CPU: 0 Tainted: G W (3.4.112-sun7i #2) [18109.816542] PC is at __dma_start+0x7c/0x80 [18109.819171] LR is at dma_ctrl+0x90/0x1dc [18109.828043] pc : [] lr : …

First, thanks to everyone here who made this great os. I am trying to read a DS18B20 temperature sensor on my orange pi pc, but I can't get it to work. I hooked up ground and 3.3v to the sensor, the data line I placed it on gpio 20/ physical pin 37 as other posts suggest but it is not reading it. I edited /etc/modules-load.d/modules.conf and modified it to: 8189es gpio_sunxi w1-sunxi w1-gpio w1-therm #gc2035 it loads up in dmesg .... [ 6.030874] W1_SUNXI: Added w1-gpio on GPIO-20 [ 6.039203] Driver for 1-wire Dallas network protocol. .... but it is not visible in /sys/bus/w1/devices/ I tried other gpio sensors, currently I can read from an i2c sen…

Gentlemen, which ports are confirmed to be working with 4.x kernels on Lamobo R1 ? I'm using Ubuntu image 5.10, with installed updates: Ubuntu 14.04.4 LTS 4.5.5-sunxi. So far, seen only working UART3 (/dev/ttyS1) on pins 8/10 of CON3. U-boot seen on UART0 (J13), but under Linux, don't see anything on either UART0 or UART2. Anyone seen better results ?

Downloaded latest Jessie image for Cubietruck. Loaded to the sd card using instruction on site. When i power CT on, looks like it start booting, all leds are flashing as on normal boot, but screen is black. Please advise what to check, how to debug. Card seems ok, because i can boot other images.

i install armbian into banana pi M1 . cat .asoundrc-X pcm.!default { type hw card 2 } ctl.!default { type hw card 2 } and get sound from TV namely HDMI . then i attach HDMI cable to sharp TV . $ aplay -l **** List of PLAYBACK Hardware Devices **** card 0: sunxicodec [sunxi-CODEC], device 0: M1 PCM [sunxi PCM] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: sunxisndhdmi [sunxi-sndhdmi], device 0: SUNXI-HDMIAUDIO sndhdmi-0 [sunxi HDMI PCM] Subdevices: 1/1 Subdevice #0: subdevice #0 ~$ cat .asoundrc pcm.!default { type hw card 1 } ctl.!default { type hw card 1 } from sharp TV , i cannot get sound from TV, i get it only from audio out . i c…

Hi, on my BananaPI I installed this image: Armbian_5.10_Bananapipro_Debian_jessie_4.5.2_desktop.raw I followed these instructions: https://searchathing.com/?p=250 to move / to SATA (or USB) and crypt it with LUKS. After all, cat /proc/cpuinfo says, there is only 1 CPU-core. How can I activate the 2nd core? Thanks for your help

On a fresh download, configuring a CB1, Desktop Vanilla system, I get: U-Boot 2016.05-armbian (Jun 10 2016 - 17:25:48 -0400) Allwinner Technology CPU: Allwinner A10 (SUN4I) Model: Cubietech Cubieboard I2C: ready DRAM: 1 GiB MMC: SUNXI SD/MMC: 0 *** Warning - bad CRC, using default environment HDMI connected: Setting up a 1280x720 hdmi console (overscan 0x0) In: serial Out: vga Err: vga SCSI: SATA link 0 timeout. AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl SATA mode flags: ncq stag pm led clo only pmp pio slum part ccc apst Net: eth0: ethernet@01c0b000 starting USB... USB0: USB EHCI 1.00 USB1: USB OHCI 1.0 USB2: USB EHCI 1.00 USB3: USB OHC…

Hi all, First of all i check the HDMI connection with a raspberry (raspbian) and OrangePi (armbian) and it works on my screen. But on the BPI-M2 dosnt work... i try with Debian Jessie upgraded, with a fresh install outdated of Debian Jessie and i try too Debian Jessie Desktop... No works... I try too with other bpi-m2 board, and the issue stills... So isnt a hardware fail... there are any config or special command tu turn on? I see the boot.src and all apparently are ok. Best regards

Dear all, we need some help from Banana Pi M2 (not that important), Cubox-i/UDOO and ODROID XU4 users. Please look through this Github issue and also have look how we currently handle IRQ redistribution on various board families (example 1 and example 2) Since irqbalanced on ARM is broken (and if it would work it's often counterproductive) assigning IRQs statically to specific CPU cores increases overall system performance slightly for free. We do this for A20 boards for years (dual core --> sending Ethernet to second CPU core), extended this on H3 boards a few months ago (quad core and somewhat complicated due to the count of different boards exposing diff…

at OPI PC with kernel Linux orangepipc 3.4.112-sun8i #30 SMP PREEMPT Sat Apr 30 19:49:10 CEST 2016 armv7l GNU/Linux before the last kernel update we use rt2800 wifi dongle. dmesg | grep usb - shows this output: [ 0.963044] usbhid: USB HID core driver [ 169.650117] usb 3-1: new high-speed USB device number 2 using sunxi-ehci [ 169.948904] usbcore: registered new interface driver rt2870 after the last kernel update with apt-get update in 2016-06-08 which include these updates: Start-Date: 2016-06-08 10:31:45 Commandline: apt-get upgrade Upgrade: linux-jessie-root-orangepih3:armhf (5.10, 5.11), libavdevice53:armhf (0.8.17-2+rpi1, 0.8.17-2+rpi1+deb7u1), f…

I don't know it was mentioned before but Orange Pi PC Plus with WiFi and 8GB eMMC built-in is already available in Aliexpress store http://www.aliexpress.com/store/product/Orange-Pi-PC-Plus-ubuntu-linux-and-android-mini-PC-Beyond-Raspberry-Pi-2/1553371_32668618847.html price USB 19.99

Morning all, First post here - just got my oPi PC 1.2 with the AllWinner HW chip set up yesterday... Running Jessie headless 5.10, updated to latest (afair, 5.112?). Used the Wget command to try and upgrade the kernal, the blue dos-like UI came up, it checked a few things, then fell down to command prompt, with "Error - unsupported HW". Any thoughts or fixes for this? THX

Hi! I have a problem in using USB DAC. USB DAC has been usually plugined in USB port and when OPi PC boots up, it is recognized by alsa but cannot be played. As I observed, green lights on boards -> USB DAC wakes up -> it takes a little while till red light -> USB DAC goes into power save mode with light blinking -> red lights up -> USB DAC wakes up again -> after booting, USB DAC is recognized by alsa but cannot play music through USB DAC e.g. mplayer2 shows "Could not open/initialize audio device -> no sound." The only work around that I know is to plug in USB DAC after power up the board, i.e. power on OPi PC first -> plug in USB DA…

Hello, I'm a new user of Orange Pi One - it just arrived yesterday. I installed Armbian and hoped to try out some H264 video. It appeared just fine on the first time - but I noticed lack of any OSD/subtitles. I tried to use different player (VLC), played with different video outputs. 'X11' worked well on both VLC and mpv... until I tried fullscreen. After long time spent researching the topic I found out that Armbian is using libvdpau-surni whitch is a community driver reversed-engeineered from Allwinner's commertial one, apparently avalibale for Android. I also read that its output will alvays overlap any other elements of the screen including subtitles, menus et…

Dear all, I need your help. I've built a fresh pcDuino3 firmware: Armbian 5.14 Pcduino3 -default - Debian 8 Jessie - CLI - Kernel 3.4.112 And now I'm trying to enable UARTs (2, 5 and 6). I've edited script.bin and now I got 4 ttyS devices. Could you please tell me how to "atctivate" those UARTs and which pins shoul I use. I guess that UART2 (ttyS1) uses D0 and D1 pins UART5 (ttyS2) uses SPI0_CS and SPI0_CLK pins UART6 (ttyS3) uses SPI0_MOSI and SPI0_MISO pins Am I right ? And how to enable ttySs? I tried following for the UART2 echo 1 > /sys/class/gpio/export echo 25 > /sys/class/gpio/export I attached my fex. file and pcDuino3 schema Unfortu…

Does somebody know if there are any size limitations connecting external USB HDD to Orange Pi One ? I'm thinking to buy a 3TB Seagate Desktop Expansion drive (it's self powered) to set-up my OPi as torrent box (now it's working with 1TB drive, aslo from Seagate). Thank you !

I plugged in and tested the 3.95 inch display with Orange Pi PC and Armbian Jessy. It can be used for own use, this is only a test program http://pl.aliexpress.com/item/Free-shipping-LCD-module-Pi-TFT-3-6-inch-for-raspberry-pi-display-screen/32236159766.html https://github.com/flexiti/WiringOP Just compile and run displayTFT.c file (display shows also CPU temperature )

Hi I have a cubieboard 2 and i used cubian but now i need to use jessie so i moved to armbian jessie. I try both vanilla et legacy headless img. I have a razberry connected to gpio and i use ethernet cable. For both img, first boot is ok but after i have a big bug at "stop autoboot". I join two picture from the HDMI output. Sometime after several reboot (hard reboot) it works but not well, for example i can't access to ssh and some services don't work anymore, mysql for example. I try different sd card and when i try cubian x1, it works well (but wheezy ) Thank

I am working on a new project which uses the Banana Pi to capture USB output destined for a printer in order to log the output from a system. The BananaPi will need to be a simple plugin which sits between the machine and a connected USB printer - so we want to: a ) Mimic the connected USB printer (so that the machine thinks it still has the original printer attached) b ) Capture the output from the machine c ) Send the captured output onwards to the printer. The BananaPi seemed the obvious choice as it has the built in USB OTG port and we would use the gadget printer to mimic the attached printer. Unfortunately, the Bananian images do not support the gadget printer a…

Hi all, I speak with BPI and the A31S chip of bpi-m2, will be change with the quad core H3... If i buy this board we will work with armbian 5.10 of bpi-m2? i need to download and install something for the compatibility with the H3? The idea is migrate the system to H3 Best regards

Hello to All! The systeminfo after login does not show up anymore!!! What might be the problem and where to look for fixing it ?? Regards, Ireng

Hello; My OrangePi PC HDMI port is dead, it throws no input signal, and I've read that this board has no ESD protection for HDMI, so I assume it died because of it. What I want to get is video working through analog TV out, but I can't seem to find the solution for this. I guess it should be simple task, but I never did it before. Hopefuly somebody can give me the solution. Thanks!

Have anyone succeeded in installing qmake on OrangePi PC?

Hello everybody, I can't run OpenGL ES on my OPI One's. I tried with a fresh new install distro : Armbian 5.13 (Armbian_5.13_Orangepione_Debian_jessie_3.4.112_desktop) with an HDMI-to-DVI screen ( h3disp -m 720p60 -d) This is what I've got : Any idea ? Does someone have the same issue ? Thanks all.

Hi, when I try to update my core the apt-get install operation fails. This is because the post-installation script creates a symbolic link as the boot partition does not support because she is fat. Also the boot is only possible with a uImage not zImage I think. To compensate I am forced to make a copy instead of the link.

I am a relatively new Linux user and I currently have a orange pi PC. There are some games not in the official repository I would like to compile. When I do so could I add them to the repository here?

I have a little problem: my fstab: root@osirisBpiM3:~ # cat /etc/fstab /dev/mmcblk0p2 / ext4 defaults,noatime,nodiratime,commit=600,errors=remount-ro 0 1 tmpfs /tmp tmpfs defaults,rw,nosuid 0 0 /var/swap none swap sw 0 0 //192.168.0.11/media /mnt/openelec/media cifs iocharset=utf8,credentials=/root/.smbcredentials,uid=1000 0 0 //192.168.0.11/media2 /mnt/openelec/media2 cifs iocharset=utf8,credentials=/root/.smbcredentials,uid=1000 0 0 //192.168.0.11/big850gig /mnt/openelec/big850gig cifs iocharset=utf8,credentials=/root/.smbcredentials,uid=1000 0 0 //192.168.0.2/C$ /mnt/sophie/c cifs iocharset=utf8,credentials=/root/.smbcredentialssophie,uid=1000 0 0 //192.168.0…

Hello everybody I expose my problem ... I create my own a20 card ( based on olimex a20 lime) ( 90% similar ) I have no problem with the hardware ....all work except ....leds ( you know in /sys/class/leds ....) But i need 3 leds ... so i write this in dts file ( sun7i-a20-olinuxino-lime.dts) leds { compatible = "gpio-leds"; pinctrl-names = "default"; pinctrl-0 = <&led_pins_olinuxinolime>; green { label = "a20-olinuxino-lime:green:usr"; gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; default-state = "on"; }; red { label = "a20-olinuxino-lime:red:usr"; gpios = <&pio 7 0 GPIO_ACTIVE_HIGH>; default-state = "on"; }; blue { label = "a20-olinuxin…

I am having a problem getting armbian 5.10 trusty to work on my pcduino3 nano lite. I tried both the Vanilla and Legacy kernels of the Trusty server flavor. With the Vanilla kernel I can see the boot process via usb console debug cable but when it gets to extracting kernel I lose output. With the Legacy Kernel via the console debug cable I get this error repeating: init: ttySAC2 main process ended If I try to ssh into root@<ip of pcduino> I get denied with password 1234 Any ideas what I am doing wrong? Thanks!

When I do a ping, I get this error: cubie@cubieboard:~$ ping www.google.com ping: icmp open socket: Operation not permitted There is a discussion of this elsewhere: https://discuss.zendesk.com/hc/en-us/articles/202374517-Linux-ping-command-fails-with-icmp-open-socket-Operation-not-permitted- Doing the following fixes things: root@cubieboard:/bin# chmod 4755 ping root@cubieboard:/bin# ls -tlr ping -rwsr-xr-x 1 root root 34752 Nov 8 2014 ping Then ping works: cubie@cubieboard:~$ ping www.google.com PING www.google.com (172.217.2.196) 56(84) bytes of data. 64 bytes from iad23s23-in-f4.1e100.net (172.217.2.196): icmp_seq=1 ttl=57 time=44.3 ms 64 bytes from iad23s…

Hello, my Orange Pi Lite WiFi (RTL 8189FTV) @ armbian 5.13 for OPi Lite works well on 20 MHz WiFi channels however is not usable on 40 MHz channels. The signal strength vary between 79 to 95 % on 20 MHz channel(s) while from -1 to 36 % on 40 MHz channel(s) and the connection is not possible. It seems the driver still needs some more tweak. Other WiFi devices have no problems with 40 MHz. The router I use to connect to is Asus RT-N18U (Broadcom BCM47081A0). Thank you for your efforts vojtvop

Hi there, I do no need help how to sort it out. This is only report for Igor. I installed Jessie server image with legacy kernel on my Cubietruck few on April. I decided try upgrade to vanilla kernel about two weeks ago with command see below. And today I decided return back to legacy kernel with same command. (it is not important why but I have answer for it, I am enjoying testing ... ;-) ) ... but before I rebooted my experiencies say check /boot folder and I did not find important files there. I used command: wget -q -O - http://upgrade.armbian.com| bash And here is output of log: cat /boot/upgrade.log No packages will be installed, upgraded, …

I keep my Lime2 updated with apt-get update/apt-get upgrade, but it does not upgrade the u-boot, that is still an old version: U-Boot SPL 2015.07-armbian-sun7i (Oct 11 2015 - 17:17:10) DRAM: 1024 MiB CPU: 912000000Hz, AXI/AHB/APB: 3/2/2 Because the network speed is not that fast, I suspect this could be solved with a more recent u-boot. How do I update the Lime2 bootloader to a recent u-boot without re-downloading an image and re-installing all my software and data? It looks like there is already a recent u-boot.bin file on the system... # ls -l /usr/lib/nand-sata-install/a20/bootloader/linux/ -rwxr-xr-x 1 root root 152 May 23 22:35 linux.ini -rw-r--r-- 1 root…

On a previous build (and separate board), I have both wlan0 and wlan1 showing up as wireless interfaces on my OrangePi+ board. I have since upgraded the image on a new board, and now I only see wlan0. The software I've written for the board relies on having both wireless interfaces present, however, I'm not sure how to get the other one to show up. I've performed the apt-get update and apt-get upgrade, and then installed the image to EMMC. I've basically got a fresh image, and I'm unsure what I need to do next in order to get the wireless adapters to show up properly. Can someone help me out? Thank you!

Hi Is docker supposed to run on OrangePi PC with Armbian 5.11? How about DM Thin below? BR Anders anders@orangepi1:~/bin$ sudo systemctl -l status docker â— docker.service - Docker Application Container Engine Loaded: loaded (/lib/systemd/system/docker.service; enabled) Active: failed (Result: exit-code) since Fri 2016-06-03 17:48:47 CEST; 14min ago Docs: https://docs.docker.com Process: 571 ExecStart=/usr/bin/docker daemon -H fd:// (code=exited, status=1/FAILURE) Main PID: 571 (code=exited, status=1/FAILURE) Jun 03 17:48:44 orangepi1 systemd[1]: Starting Docker Application Container Engine... Jun 03 17:48:46 orangepi1 docker[571…

Hi, I want to use my cubietruck to play the video in HD and with spdif pass-trougth and I want use mopidy. with last armbian jessie desktop : with mplayer2 : pass-trougth is ok but video is too slow with mpv : I heard a very loud noise at the output of the amplifier is not DTS decoding and is transmitted as the pcm.--> it is a kernel problem: the driver sends a sound that is not recognized by the amplifier. the SPDIF sound format is limited to 24 bits video is OK. mopidy is OK with last armbian xenial: it work because mpv is very old with mplayer2 : pass-through and video is ok but kernel panic when I put the video paused--> kernel bug solved : …

Hi! I'm using a mosfet to control a fan based on temperature on my opipc, but now it just turns on and off. I'd like to control the rpm with pwm, but I cannot use any of the pins with wiringop :S I read on an other forum that the h3 has only one pwm, but which one is the pwm pin, and how could I use it? Thanks in advance!

Update: BPi M2+ is done but further results would still be interesting. Now we need results for NanoPi M1. The most simple way is using the Armbian image as outlined in post #4 below. The only thing you would've to change is the following and can then run the lima-memtester binary as outlined below: ln -sf /boot/bin/nanopim1.bin /boot/script.bin echo nanopim1 > /etc/hostname reboot Dear BPi M2+ users. I just tested DRAM reliability with my BPi M2+ just to realize that this board doesn't run stable even with just 624 MHz clockspeed (currently testing 600 MHz for an additional hour or so). In case you have a BPi M2+ it would really help if you could do the sam…

Hi all ! Sinovoip just send me a free sample of a new board, BPi M2 plus. - H3 SoC - eMMC (7.3 Go) -Inboard Wifi+BT ( chipset AP6212 ) Very good, thanks to them ! So I have installed Armbian (here), but the wifi doesn't work yet. I have found the driver source, (http://www.mediafire.com/download/68vvpim3k3po0ur/support_ap6212.rar) but I think I must recompile all Armbian to try if this driver works. Some questions: 1) Can I compile Armbian with a Ubuntu 16.04 x64 desktop, or 14.04 is better ? 2) If so, does a source is available somewhere (and maybe a tutorial? XD ) ? I have look the Igor's repo, but I think sun8i is not available at this day. T…

This simple tutorial to explain ho wto manage the GPIO with the I2C bus and C++ under Netbeans .

hi guys, im trying to compile media_build but it says the kernel has no i2c mux support how could i easy compile a new kernel with i2_mux enabled on the orange pi?

I upgraded a cubieboard2 to kernel 5.11 and noticed that I have one core online and one core offline. Can someone confirm that?

Hello, I'm new to SBC and have to fire my newly received Orange Pi PC. Should a Vanilla kernel download be soon available, or is it adviced to go to the legacy one? I would be happy to know, in order to start my project on a base that would not need to big modifications for the coming monthes. Best regards, JMF

i have banana pi m2plus and compile latest armbian after starting x11, i get "could not connect to wicd's d-bus interface..." no error shown in /var/log/wicd/wicd.log and wicd seems to be working also bcmdhd loaded, but when trying to connect wifi, cannot get ip any idea?

I've noticed that Armbian builds are taking a really long time to power up on Orange Pi PC and Orange Pi One. Is there some way I can see what's going on in the bootloader that's causing these long delays? Also, if I run apt-get dist-upgrade and take the latest kernel, it never boots after that point. I think something's wrong with the boot sector (or whatever it is) that is written/updated on the SDCard. The Orange Pi power LEDs don't light up until the bootloader successfully finds an OS on the SDCard. All of the builds over at orangepi.org work just fine but the Armbian ones aren't working right. I'm using a diverse collection of very high-quality SDC…

What are the steps to enable the regular (non-mali) LCD display (lcd0/1) with a Vanilla kernel? I can't find any examples of making the LCD work. What am I missing? Thanks Chris