Allwinner sunxi

I run a cubietruck with armbian jessie/legacy-kernel. I used it as a owncloud- and tvheadend-server. For the tvheadend-server i use 2 DVB-S2-USB-devices (TeVii S660 USB). I had problems woith one of them and want to replace one of them with a Technotrend TT-connect S2-4600. I could not compile the needed driver, so I tried to use the vanilla-kernel, because the newer kernel has support for this DVB-card. I could use the Technotrend-device with vanilla. But both devices stutters when displaying or recording a stream. Is this a known problem? When switching back to legacy, the old Tevii-device runs smooth again, but there is no support for Technotrend. What can I d…

Hello, how to enable analog tvout? I have OpiPC board with legacy jessie desktop armbian image. I added module tv in /etc/modules. I change script.bin with: [disp_init] disp_init_enable = 1 disp_mode = 1 screen0_output_type = 3 screen0_output_mode = 10 screen1_output_type = 2 screen1_output_mode = 11 fb0_format = 0 fb0_width = 0 fb0_height = 0 fb1_format = 0 fb1_width = 0 fb1_height = 0 [tv_para] tv_used = 1 tv_dac_used = 1 tv_dac_src0 = 0 But there is no signal at all... I checked tvout with loboris ubuntu image (added "tv" to /etc/modules and fixed script.bin) and my tvout worked well. I noticed that when ubuntu image is loading tvout already gives to…

i use armbian on my cubieboard2(based on Allwinner A20 Chip) with default HDMI. i have some problems. the first is default font of Terminal emulator and XTERM is so small. how can i changed their font size ?????!!! the second is i cant edit/create network connection with network manager. the ipv4 nad . .. are disable. is there anyone to help me plz.????

Hi Igor and all, after running armbian on my A20 lime2 for a long time, I decided to switch to armbian on my A10 lime, too (from jessie with a eewiki-based self-compiled kernel). So far it works as perfect as the A20, but there are two small and funny things with the Armbian_5.00_Lime-a10_Debian_jessie_3.4.110.zip image I used: After login the nice armbian banner stated that my A10 lime is a cubieboard . I have a cubieboard, too. So I double checked... The problem is located in /etc/init.d/armhwinfo, There all "sun4i" boards are simply "Cubieboard". I had to adapt the LED check which is used to detect Lime and Lime2 a bit and added the Lime A10. I ch…

Igor P. please help me what to do and what is missing? Step0.(run) ./compile.sh Step1. Choose a board (cubietrack) Step2. Choose a distribution (trusty) Step3. Install desktop with HW accel… (No) Step4. Choose a branch (default) And I get the message in console error: [ o.k. ] Dependencies check [ @host ] [ o.k. ] Building [ Armbian 4.6 Cubietrack Ubuntu trusty default ] [ error ] Installation of package failed The core is not collected how to fix the situation??? And another question: Why different values have BogoMIPS on Cubieboard (proc/cpuinfo) in distributions desktop (956.10) and CLI (27.14)? Cubie operates in CLI mode on a lot slower? This …

Hi, I try to play with Armbian Stretch mainline kernel 4.14.y on Orange Pi Zero and need for my idea sf funktion (SPI) and i2c in u-boot terminal. I've build mainline U-Boot but the files in /boot directory from armbian looks so "strange". There is any description how to replace the files or make changes. Thanks for help. P.S. Have a lot of experience with uC programming, less with Linux.

There appears to be a problem or incompatibility with the new 2018.05 u-boot configuration and/or implementation and the Armbian sunxi-next startup scripts (both in the current master branch). The "fdt" command processing doesn't appear to properly expand local environment variables before trying to execute them (?). Here's an example from a vanilla Armbian boot (u-boot 2018.05) - notice the "libfdt fdt_path_offset() returned FDT_ERR_NOTFOUND" errors when the DT fixup script runs: ... Err: serial Net: No ethernet found. 230454 bytes read in 15 ms (14.7 MiB/s) starting USB... No controllers found Autoboot in 1 seconds, press <Space> to…

Good day friends! I have Orange Pi PC and I decided to try Armbian. Excellent build! My congratulations to the developers Before, I used the image of 'loboris'. I had a problem with the management of the LED in Armbian. How to make u-boot turn red led to the kernel boot? Edit fex file no avail

Hi, i'm new on this forum. I have compiled u-boot 2017.3 and Mainline 4.14 for my own for Olimex-olinuxino-micro-emmc - and it is runnig ;-) But when i reboot the board, u-boot hangs with: U-Boot SPL 2017.03+ (Oct 03 2017 - 18:24:31) DR Only reseting or repowering helps. any ideas?

I posted this in the Orange Pi Zero 3 topic earlier but got not response. **How would one go about to get the default u-boot config that is flashed to spi to have netretry turned on?** > If anyone is interested, here is a guide to netboot (pxe) the orange pi zero 3: https://raymii.org/s/tutorials/Netboot_PXE_Armbian_on_an_Orange_Pi_Zero_3_from_SPI_with_NFS_root_filesystem.html

EDIT: This seems to be a problem with the OS running on the Mikrotik router. See this thread for a work-around that "shouldn't make a difference". Hi! I've got some trouble with u-boot on an Orange Pi PC+ connecting to a Mikrotik router RB922UAGS-5HPacD, and I'm not sure where I should start digging. Here is what I have so far: Orange Pi PC+ with u-boot 2017.11-armbian installed on eMMC by running nand-sata-install. But instead of booting from eMMC, I'd like to fetch the kernel via tftp, so I modified the bootcmd accordingly. The relevant configuration / commands are: setenv ipaddr 192.168.3.74 setenv serverip 192.168.3.7…

Hi, I built a fresh Armbian Image from scratch (using Armbian build system). After that I used Etcher to burn .img file to SD card. Everything works great, but U-Boot shows, that there is no environment. I used saveenv and fixed a problem. Then I installed Armbian into internal memory (eMMC), same message about environment, I tried fix it same way, using saveenv, but I get only an error message and infinite loop. Screenshot attached. How I can fix that? UPD: My board - Orange Pi Zero Plus 2 Kind regards

Hi. I'd want to set a custom MAC address to my cb2. I set the static mac address in u-boot environment variable ethaddr. If i print the environment (with "printenv command" i find it right there but when the system starts and i go through ifconfig i can see eth0 has a different MAC. Any suggestion on how to get MAC from u-boot? I'm on Armbian 5.20 legacy kernel. Thank you

Hello, I have a design with old but cheap Allwinner A20 processor. At the boot time, u-boot keeps rebooting just after reaching the below line (just after DRAM: 1GiB): U-Boot SPL 2019.07 (Oct 13 2020 - 17:36:08 +0300) DRAM: 1024 MiB CPU: 912000000Hz, AXI/AHB/APB: 3/2/2 Trying to boot from MMC1 U-Boot 2019.07 (Oct 13 2020 - 17:36:08 +0300) Allwinner Technology CPU: Allwinner A20 (SUN7I) Model: Olimex A20-OLinuXino-LIME2-eMMC I2C: ready DRAM: 1 GiB I even tried ready images from internet, alghtough some did not reboot countinlusly, but they stuck at the same place (line: DRAM: 1 GiB). BTW, in our PCB, we did not use …

When tweaking Armbian’s Build System I understand that it also builds u-boot and updates it when new sources are available. I understand, that the last one was updated on : [🌿] {u-boot:1} Cleaning u-boot tree [ u-boot-worktree/u-boot/v2024.01 for '' ] [🔨] [Mon Aug 25 11:11:25 PM CEST 2025] Running: git --no-pager clean -xfdq [🌱] Calling Python patching script for U-Boot: [ https://github.com/u-boot/u-boot - tag:v2024.01 ] [🌱] Using U-Boot patch dir: [ u-boot-sunxi ] Where is the latest build could be downloaded from and what is its flash procedure and recovery (if necessary) ?

Hi there, I got some NanoPi-NEO running and need to update the kernel, modules and dtb's. With 4.18 the Ethernet does not seem to get started correctly. I noticed a change in u-boot and the newer Armbian releases have Ethernet-Support in u-boot. So my basic idea is to not just copy the kernel files but also update u-boot via dd command. I suppose there are at least 3 regions in the image: 1. the partition table which I don't want to change. 2. the u-boot configuration which I'd like to keep. 3. the u-boot runtime. So for #2 and #3 I'll need an image file. I'm trying to set-up a build environment f…

Hello! For the Cubieboard 2 on the SD card I use the image Armbian_5.25_Cubieboard2_Debian_jessie_default_3.4.113.img. It is only loaded with U-boot v2015.10.rar. But this U-boot v2015.10 480 MHz DRAM. At this frequency, my Cubieboard 2 freezes. Can anyone build U-boot v2015.10 to 432 MHz DRAM? I will be very grateful. I'm not very good at Linux. I apologize for the bad english.

I had to reapply u-boot image. So, I did it by armbian-config and later by "dd" command. In both situations this is failing (please see u-boot messages printed by serial). I was restoring the image (I have backup images of my SD card) and trying again. What may be the problem? I had linux-u-boot-orangepi*-current 22.08.6 installed. As below - please note Verifying Checksum ... Bad Data CRC BTW. I tried the same on Orange Pi PC and Orange Pi Zero - the same result (fail to boot). => version U-Boot 2022.07-armbian (Oct 18 2022 - 07:35:20 +0000) Allwinner Technology arm-none-linux-gnueabihf-gcc (GNU Toolchain for the A-profile Archite…

I had it and lost it: u-boot with I2C. I did not write down how I did it (was heavy) Tried to build yourself again: does not work. u-boot-mizi.bin does not want to boot. For 2 days I try to find the solution. Google has already blocked me Can somebody help? I need i2c directly, after power on, to read FRAM and set relays. Programming in Linux is enjoyable but system administration is horrible. Thanks

How enable UART1 (pin 8 and pin 10) or UART2 (pin 11 and pin 13) I re-read a lot of documentation but did not find a solution, everyone writes abstractly. There is a concrete decision how to include it for orange pi (zero or one) and armbian. Correctly I understand that UART1 is ttyS1 and UART2 is ttyS2?????? p.s. Help, I'm ready to even pay for help ) uname -a Linux orangepizero 4.11.5-sun8i #11 SMP Fri Jun 23 20:03:23 CEST 2017 armv7l GNU/Linux

Hi again guys, I buy some usb wireless boards to connect to the GPIO with the UART Pines, but in the especifications of the GPIO, only i see 1: Has you can see only GPIO 14 and 15 have TXD and RXD... I will use too the SPI to add other ethernet so... its possible use other GPIO for TXD and RXD?? In my Pixhawk (board for drones) i use I2C for monitoring stats via wireless (2.4Ghz), maybe this pines can work for usb wireless. If is possible, how can i program other pines for that? will be any diference? (more slow or more cpu resources or whatever?) Thanks like always!

hello I have a module of teleinformation on my GPIO port which must work on the UART 3 but I do not know at all how to configure it and it does not work, could you help me? I am under armbian 5.90. here is the link to my telinformation module: PiTinfo thank you in advance for your help

Hi, I have a problem to comunicate with sim800l via UART3 or any other UART. Is there way to activate UART3 on Linux PiOne 4.14.18-sunxi kernel if it is not already activated. I could find DTB files but I do not know how to view them or transfer to DTS and read/modify them to se if there could be a problem. I'm using pins 8 and 10 for UART3 on 40Pin header and try to comunicate with putty and screen over /dev/ttyS3 but no luck. Any idea what is going on? Sim800L works fine over pl2303.

I'm trying to check if UART on my Orange PI is working. I've enabled UART via armbian-config and rebooted OPi. root@orangepipc:~# dmesg|grep tty [ 0.000000] Kernel command line: root=UUID=e5185d19-ff08-47bb-8673-1779ef917d92 rootwait rootfstype=ext4 console=ttyS0,115200 console=tty1 hdmi.audio=EDID:0 disp.screen0_output_mode=1920x1080p60 panic=10 consoleblank=0 loglevel=1 ubootpart=530c2b83-01 ubootsource=mmc usb-storage.quirks=0x2537:0x1066:u,0x2537:0x1068:u sunxi_ve_mem_reserve=0 sunxi_g2d_mem_reserve=0 sunxi_fb_mem_reserve=16 cgroup_enable=memory swapaccount=1 [ 0.000189] console [tty1] enabled [ 1.975487] console [ttyS0] disabled [ 1.995…

Hello, I want to read data from UART3 on OrangePi One. I want to use UART3 (pin 8 & 10), so I enabled uart3 overlay at /boot/armbianEnv.txt. Now I expect to read data via minicom -b 115200 -D /dev/ttyS3 but I read nothing unfortunately. What am I missing? Any help is appreciated. I'm using Linux orangepione 4.19.38-sunxi (sorry, armbianmonitor doesn't generate link) Thank you, Regards

Hello, I want to read data from UART3 on OrangePi One. I want to use UART3 (pin 8 & 10), so I enabled uart3 overlay at /boot/armbianEnv.txt. Now I expect to read data via minicom -b 115200 -D /dev/ttyS3 but I read nothing unfortunately. What am I missing? Any help is appreciated. I'm using Linux orangepione 4.19.38-sunxi (sorry, armbianmonitor doesn't generate link) Thank you, Regards

Hello, I am trying to have a serial link between an arduino and a banana pi. As a basic test, the Arduino is sending "hello" every seconds. I observe that the reception by the Banana pi is not good. I have tried , several baud rates, /dev/ttyS2 and FTDi adaptor. The best result seems to be with the FTDI adapter , at 115200 bps. But I have still a lot of errors, see below. When I plug the FTDI adapter on my laptop, it works without issues. Do you know what could be the cause of my issues? Thank you Sebastien hell»½ýhgn·ïÏÞh»½ëèu·oÝÕýemmÍÿÿý¿¿ëÏÿÿýïï»ÿ½{í»ÿ¯nïÿý{¿ûoïÿÿÿÝÿïÏíumío^huw·oMÕh…

Hi every one I installed armbian on my orange pi win plus. I want to use all uarts. uart1, uart2 and uart3. uart2 is enabled by default but the others are not. I add "overlays= uart1 uart2 uart3" in armbianEnv.txt but they don't work. Additionally, there is not /alwinner/overlays directory in /boot/dtb. And there are ttyS0, ttyS1,ttyS2 and ttyS3 in /dev directory.. So..How can I enable the other uarts? thank you

Hello, after some time i am trying to work again on my Orange Project. Now i want to connect an serial device on UART2 (PA0 / PA1). The devices /dev/ttyS0 - S3 are existant, but no data is coming in over RXD. I already read the thread here and tried to check the configuration. I upgraded my armbian and i am now working with ARMBIAN 5.60 stable Debian GNU/Linux 9 (stretch) 4.14.70-sunxi64 So i hopefully found the configuration in /boot/dtb-4.14.70-sunxi64/allwinner/sun50i-h5-orangepi-pc2.dtb After decompiling i found uart0@0 { pins = "PA…

Hi, I need to use uart (for a gps receiver) and i2c (for some sensors) for my project via the gpio pins. Fortunately i2c is enabled in the images by default. I hope it is also enabled if I recompile armbian for the orangepi lite by default? Afaik I have to enable UART in the following file: https://github.com/igorpecovnik/lib/blob/master/config/fex/orangepilite.fex . Unfurtunately I do not understand which pins on the gpio header correspond to the ports defined in this file. For example: Can I use UART on any pins on the gpio header? I would like to use UART on the same pins as in https://www.element14.com/community/servlet/JiveServlet/previewBody/73950-102-10-…

I was unable to get UART working on my Orange Pi Zero. Note, that I am not trying to use UART to access the terminal, I need to use the UART port to say connect to an arduino, etc. Here is the output of some commands that I thought may be helpful. uname -a Linux orangepizero 4.10.0-sun8i #14 SMP Fri Feb 24 03:02:58 CET 2017 armv7l armv7l armv7l GNU/Linux dmesg | grep TTY [ 0.000000] Kernel command line: root=UUID=b5fc390b-23ef-47a8-83fb-0fd94a3d2dcc rootwait rootfstype=ext4 console=tty1 console=ttyS0,115200 cgroup_enable=memory swapaccount=1 hdmi.audio=EDID:0 disp.screen0_output_mode=1920x1080p60 panic=10 consoleblank=0 enforcing=0 loglevel=1 ubootpart=8b70…

Hi, We are using an Orange PC Plus with Armbian Orange Buster OS. Connected to the 40-pin header is Pi-Supply LoRa Node pHAT. We are having trouble commumicating with the LoRa module. We occasionally can get partial messages. The OS reports no errors with the UART. Any suggestions? Thanks frank

Hello, I try use UART interface on Lime2, but have problems with data transmission. Input echo 12345 > /dev/ttyS2 Output â–’;375 UART settings stty -F /dev/ttyS2 9600 -parity cs8 -cstopb How to detect the problem? Thanks

I have a NanoPi Neo. I am trying to get a gps module setup on it. Just at typical neo6m, serial gps module. I would like to start out at the basics. I am not new to linux, or micro controllers, but I am new to the nanopi. How can I confirm that something is talking on the serial ports? Is there a way to route the serial port traffic to the terminal when I am logged in through ssh? I am not sure the uart1 is enabled, but even if it is enabled, I really wouldnt know how to confirm it. Does anyone know where I can look to find some info? I would like to find out how to enable the serial ports for communication with another device &amp…

Hello ppl. I have an Orange Pi Zero, and I have some issues using UART interface, it give me an output like this: ▒▒▒I▒%E▒Y=7▒g!=7▒Y=5▒[s▒i-''▒Y-9/▒Y=▒▒▒RrR▒▒▒V▒▒ ▒▒▒I▒%E▒Y=7▒c5!e=#=15Q=-▒a#'-#5▒▒▒RrR▒▒▒V▒▒ ▒▒▒I▒%E▒[5=9/57▒=5▒c5!-▒a'▒7==;=5▒57=5%!#▒▒▒▒▒▒▒▒▒▒▒▒▒▒]▒m]▒▒▒▒gY{▒▒}=9/5▒▒5;▒5▒▒▒▒▒▒▒▒▒▒▒▒▒]▒m]▒▒▒▒gY{▒▒}7=#957▒muuu▒▒▒▒▒▒▒▒%=#=15%5#▒7=5%!#▒▒▒▒▒▒▒▒▒▒▒▒▒▒]▒m]▒▒▒▒gY{▒▒7-)▒5%5▒%!#-!▒7=5%!#▒▒▒▒▒▒▒▒▒▒▒▒▒▒]▒m]▒▒▒▒gY{▒▒Y=cW_▒7=5%!#▒▒▒▒▒RrR▒▒▒V▒▒ ▒▒▒I▒%E▒Y=7▒▒59▒▒'!9='▒y▒▒▒R▒%I▒▒▒▒%▒▒ai▒▒▒I▒%E▒Y=7▒gY{…

Hello. For some reason, UART1 does not work for transmission, only for reception. The transmitter pin itself is definitely working, I checked by switching this pin to output mode, and then switching it to a high/low logical level, everything works properly, the level on the Pin changes. How I check the UART itself: I installed picocom, shorted the TX and RX pins, and I’m trying to see what I’m sending. For UART2 this method works as it should, but UART1 only works for reception. I realized this when I opened the TX and RX, and was able to receive incoming data sent through the USB-UART converter.

Hi everyone, I am using an OrangePi Zero with AllWinner H2+ and I need to catch UART1_TX and UART1_RX interrupts. I have been reading the Allwinner H2+ datasheet (http://wiki.friendlyarm.com/wiki/images/0/08/Allwinner_H2%2B_Datasheet_V1.2.pdf) and I have seen that UART1 interrupts are mented on PG_EINT (section 4.22.2.46) and UART Register Description (section 8.3.5) - I have no clear which registers I should configure to detect the UART1 interrupts, and how to do it. For example, for detecting Received data available, I think I should: - Enable the ERBFI bit in UART_IER register - Check IID field in UART_IIR to de…

Hi I'm trying to understand how to enable Uart 2 for serial communication with a mcu on the banana pi (trying to connect a board running klipper to it). I connected the Uart of the board to CON1-P08 and CON1-P10 of the Banana PI M3 according to all i can find those pins are tx/rx for UART2. So far i figured out that the UART should be one of the /dev/ttyS* ones if i'm not mistaken, I can see /dev/ttyS to /dev/ttyS7 but am missing the /dev/ttyS1 user@bananapim3:~$ ls /dev/tty* /dev/tty /dev/tty11 /dev/tty15 /dev/tty19 /dev/tty22 /dev/tty26 /dev/tty3 /dev/tty33 /dev/tty37 /dev/tty40 /dev/tty44 /dev/tty48 /dev/tty51 …

Hi. I'm trying to connect my orange pi to pc using UART3 but it doesn't work. I connected UART3 to my pc using USB to serial converter and my pc recognized it. so I open a serial session in putty. then when I tried to connect in orange pi it doesn't work. I tried command minicom -b 9600 -D /dev/ttyS3 but it doesn't work. system properties: Linux orangepipcplus 4.19.62-sunxi #5.92 SMP Wed Jul 31 22:07:23 CEST 2019 armv7l GNU/Linux dmesg | grep tty output: [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rootwait rootfstype=ext4 console=ttyS0,115200 console=tty1 hdmi.audio=EDID:0 disp.screen0_output…

I am using GPIO(CON3) pins 8 and 10 for a project. In BPI M1+, functions for those pins are PH0 and PH1 respectively. https://bananapi.gitbooks.io/bpi-m1-bpi-m1-plus-/content/en/bpi-m1+_gpio_pin_define.html But, when I added overlays=uart3 ,I didn't work properly . When I checked the overlay file sun7i-a20-uart3.dtbo , by changing it to .dts , I figured out that this overlay file uses PG6,PG7 pins, not PH0,PH1 pins. So, to modify the configurations without adding uart3 overlay in the /boot/armbianEnv.txt file, I wanted to edit the /boot/dtb/sun7i-a20-bananapi-m1-plus.dtb file. When I check the file, there are uart3_pins_a option and uart3_pins …

Hi, I'm using a cubietruck and bananapi board (both A20 devices) for a long time (They run very stable for many years). I'm using uart3 for interfacing with arduino boards using the kernel overlay. When I upgrade the kernel to a version 5+ the overlay does not work anymore and ttyS3 is not working and missing in dmesg. The behaviour is the same on both boards. Autoboot in 1 seconds, press <Space> to stop switch to partitions #0, OK mmc0 is current device Scanning mmc 0:1... Found U-Boot script /boot/boot.scr 3708 bytes read in 34 ms (106.4 KiB/s) ## Executing script at 43100000 U-boot loaded from SD Boot script loaded from mmc 217 bytes read in …

Hello. Somehow TX on UART 3 is not working. I connected USB-UART converter or the Banana Pi Zero M2 UART 3 Pins (as it shown here https://bananapi.gitbook.io/bpi-m2/en/bpi-m2_gpio_pin_define), set Baud rate, but I can't send anything from the SBC to PC. But I can send messages from PC to Banana pi. The converter is working properly(tested on Arduino). Do you have any ideas why? Physically nothing looks damaged, wires are soldered accurately and correctly.... Some system info $ uname -r 6.1.2-sunxi $ cat /etc/os-release PRETTY_NAME="Armbian 23.02.0-trunk Jammy" NAME="Ubuntu" VERSION_ID="22.04" VERSION="22.04.1 LTS (Jammy Jellyfish)" VERSION_CODENAME=jammy …

Hi all, i am trying to enable UART4 on my Cubieboard2 via /boot/armbianEnv.txt: overlay_prefix=sun7i-a20 overlays=i2c1 uart4 param_uart4_pins=a but if it seems that my uart4 is not working. If i look at dmesg | grep tty there is no ttyS4-device - only ttyS0: [ 0.000000] Kernel command line: console=tty1 root=/dev/mmcblk0p1 rootwait rootfstype=ext4 sunxi_ve_mem_reserve=0 sunxi_g2d_mem_reserve=0 sunxi_no_mali_mem_reserve sunxi_fb_mem_reserve=16 hdmi.audio=EDID:0 disp.screen0_output_mode=1920x1080p60 panic=10 consoleblank=0 enforcing=0 loglevel=1 [ 0.000860] console [tty1] enabled [ 1.542600] 1c28000.ser…

Hi folks, I'd like to build a simple rs485 interface onto an A20-OLinuxino-Micro board. Therefore I was looking into utilizing one of the UARTs (6 or 7) on EXT1 or EXT2, add an external driver chip to it and 'fork' the according kernel module to implement support for switching send/receive with the RTS line. While that seemed to be an easy approach, I already got stuck with the basics. :-( dmesg shows me [ 2.822776] printk: console [ttyS0] disabled [ 2.842962] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 53, base_baud = 1500000) is a U6_16550A [ 2.843045] printk: console [ttyS0] enabled [ 2.866650] 1c29800.serial: t…

hi my kernel 3.4.113 from armbian my OrangePi Zero dont have poweron - button by default / i know system can wake up from gpios / IR signal / usb events / wakeonlan and another sourcec bu i try todo standby and wakeup after! withous any success (((( :/sys/power# cat state standby mem bootfast goto sleep echo mem > /sys/power/state or echo standby > /sys/power/state working fine ) but i cant wakeup system (((( i try gpio usb ir wakeonan what i do wrong ???? somebody can clarify my issue ??? my loaded modules lsmod g_ether 38598 0 ir_lirc_codec 3685 0 ir_nec_decoder 1556 0 lirc_dev 78…

orange pi zero uboot eth have only 10baseT, HDX => mii info PHY 0x00: OUI = 0x50005, Model = 0x00, Rev = 0x00, 10baseT, HDX PHY 0x01: OUI = 0x50000, Model = 0x00, Rev = 0x00, 10baseT, HDX any way change to 100 full duplex at boot time because tftp work fine but slooow after linux kernel starded normal 100 full duplex eth

Hi, Can someone help me on how we can set a uBoot splash screen (with a .bmp) instead of the running boot text? Need this in a OPiPC, legacy (3.4.113). Any help is welcome. Christos

Hi all, I am using Orange Pi 0, I am trying to show some initial booting message on LCD. I am interfacing JHD204A which is a 20x4 charecter display.Which uses HD44780 controller. Is there a way to access Pi 0 GPIOs from Uboot? So that I want to show some initial message on L CD while Linux gets loaded. I appreciate any inputs, thanks in advance.

Hello, I have a problem with uboot, during its scan of USB buses, it blocks for several tens of seconds, displays an error, then boots. Sometimes it blocks completely and it takes several ON/OFF attempts to get it started. I'm using Nano Pi Core LTS with the mini-shield, I have over 20 and it's happening on all of them. This is what is displayed when it finally starts : U-Boot SPL 2020.10-armbian (Aug 08 2021 - 15:18:24 +0200) DRAM: 512 MiB Trying to boot from MMC1 U-Boot 2020.10-armbian (Aug 08 2021 - 15:18:24 +0200) Allwinner Technology CPU: Allwinner H3 (SUN8I 1680) Model: FriendlyARM NanoPi NEO DRAM: 512 MiB MMC: mmc@1c0f000: 0, mmc@1c11000: 1 Loa…

I'm using 14.04, and vanilla kernel on A20, followed the documentation for distro upgrade, but it's in endless loop: Calculating the changes Error authenticating some packages It was not possible to authenticate some packages. This may be a transient network problem. You may want to try again later. See below for a list of unauthenticated packages. module-init-tools Restoring original system state After this appears, the whole dist upgrade process restarts, and ends with the same error.

Hello We are using NanoPi M1 board for robot application.So I am trying to install Ubuntu 16.04 LTS. I want installation procedure for Ubutu. In nanoPi M1 manual they mentioned only for Windows OS. If anyone knows procedure please help me.

Hello, I have problems with the armbian distributions on my orange pi zero 3 because I can't even use chatgpt to activate the sound card on the expansion board that comes as an accessory for the orange pi zero 3. I'm referring to the board that has two USB outputs and an audio jack port that I think is also a video port, but I can't get sound out of that port, only sound comes out of the HDMI port. It's a real mystery since there's no problem with the other distributions, but with armbian I can't get that audio output port to work. If you can help me please, I've tried a number of things and I can't get it to work.

Hello, I download Ubuntu Trusty for my orangepi PC. It's working fine. But the pointer for the mouse on the desktop is missing. And with command line (Alt-F1), the last line is under the screen. How to fix these two poins ? Regards

Using Firefox Send, expires after 7 days / 100 downloads. My own build - works nicely for me & installs to eMMC. 203.6 MB compressed. Use xz to decompress. Filename: Armbian_5.77_Orangepi3_Ubuntu_bionic_dev_5.0.4.img.xz https://send.firefox.com/download/e2961cb805fba655/#rquCw2FsaPvGQpVviByLHA

Hi, i found some issues in the ubuntu and debian images. Maybe it is better to generate bug reports? _ubuntu_ * the boot console output at HDMI is interrupted, i dont see all messages. The console is back if the boot is complete and i see the login prompt. * the harddisk isnt working * at my lamobo board i found messages about usb resets * swconfig isnt generating interfaces like eth0.101 or eth0.102 * i put my swconfig under /etc/network/if-pre-up.d/swconfig, maybe this is the problem _debian_ * if i put my swconfig at /etc/network/if-pre-up.d/swconfig the eth0.101 and eth0.102 devices are generated, but no traffic can be send or received * …

How can I disable the auto login as the root user in the cubietruck ubuntu (XFCE)? That does not sound a good idea. How could I auto login with a different user? The GUI settings editor "display chooser" inside Session Startup doesnt work. I've been looking around how to do that, but in this case I cant find the config file which was supposed to be inside /etc/lightdm/ Thanks and congratulations for your work.

Help please! I have a bp2 which was bought almost a year ago, and use Armbian_5.14_Bananapi_Debian_jessie_3.4.112.raw as the image for couple of months. Today, I'm try to upgrade to the Armbian_5.14_Bananapi_Ubuntu_xenial_4.6.2.raw image, but the pi can't boot at all. What I do to prepare the sdcard with the following procedure: 1. remote the old partitation, and create a new fat32 partitation 2. dd bs=1M if=Armbian_5.14_Bananapi_Ubuntu_xenial_4.6.2.raw of=/dev/sdc; and sync 3. mark the written partitation as bootable with fdisk ps: I'm using fish shell, and the syntax for the dd command is valid So, what's wrong with my steps? How can I troubleshoot? …

According to the specs of the OP PC Plus, it only supports 32GB micro SD. My only 32GB that I have, that I was booting from on the OP PC plus eventually got corrupted, and will not boot, can't format and install armbian or anything. What are my options? Can I somehow boot from a 64GB micro sdcard, or USB from a fresh armbian image write?

Hi, Please, i am seeking for some help. Today i just did an apt-get dist-upgrade and my banana pi updated the kernel to 4.19.13. There wasnt any error messages but then i wasnt able to boot. I get messages like "/boot/zImage file not found" so i checked my sdcard (wich cointains the boot folder) and i saw that zImage was symlink to the previous kernel image (wich no longer existed). I corrected it cause in fact there was a vmlinuz-4.19.13-sunxi but there are some more symlinks broken in boot foolder. UInitrd is also broken and i dont have the appropiate file to make a new symlink, script.bin symlink is also broken (it pointed to /boot/bin/bananapi.bin wich …

Hello, I try to re-install my olimex lime 1, but I'm unable to boot from the current buster image. For now, here's what I do to flash the sd card: % wget -c "https://dl.armbian.com/lime/Buster_current" % mv Buster_current Armbian_20.02.1_Lime_buster_current_5.4.20.7z % 7z x Armbian_20.02.1_Lime_buster_current_5.4.20.7z % sudo sh -c "dd if=Armbian_20.02.1_Lime_buster_current_5.4.20.img of=/dev/sdc bs=1M" And I come up with a result like this: % sudo sfdisk -d /dev/sdc label: dos label-id: 0xd9b237ef device: /dev/sdc unit: sectors /dev/sdc1 : start= 8192, size= 2318336, type=83 Is this empty space before the first par…

Hi guys, Yesterday I updated my Orange PI PC with build 5.10. I want to build custom wifi driver using dkms. Dkms requires kernel scripts but scripts build fails with following error: root@orangepipc:/usr/src/linux-headers-3.4.112-sun8i# make scripts scripts/kconfig/conf --silentoldconfig Kconfig fs/Kconfig:287: can't open file "fs/fs_compat.kconfig" /usr/src/linux-headers-3.4.112-sun8i/scripts/kconfig/Makefile:33: recipe for target 'silentoldconfig' failed make[2]: *** [silentoldconfig] Error 1 /usr/src/linux-headers-3.4.112-sun8i/Makefile:493: recipe for target 'silentoldconfig' failed make[1]: *** [silentoldconfig] Error 2 make: *** No rule to make target 'includ…

Hi all. I have a Banana Pi M1+ and I want to use it as a NAS using a SATA HDD (1TB). I read this article http://linux-sunxi.org/Cpufreq#Performance.2Ffunctionality_impacts and I want to change the scaling_max_freq. I installed the "Armbian_5.20_Bananapi_Debian_jessie_4.7.3" image. But the maximum frequencies available is 960000. I tried to compile the kernel by myself, changing the file sources\linux-vanilla\v4.9.5\arch\arm\boot\dts\sun7i-a20.dtsi as suggested in other posts. cpu0: cpu@0 { compatible = "arm,cortex-a7"; device_type = "cpu"; reg = <0>; clocks = <&cpu>; clock-laten…

I'm trying to recompile the image from source (because I want the kernel with SATA PMP support, and I got the SATA port multiplier and 3 drives ready), but failed in the last step. As the attached image, the problem should be caused by "Device or resource busy". I'm using a fresh downloaded Ubuntu 16.4 VB image and follow every instructions in github. So, how can I get rid of it? Am I missing something? Thanks.

Good morning, I am trying to compile the lastest sources for the olinuxino-a20-micro and it fails on building libvdpau. VM guest is Ubuntu Mate 14.04 Here is what the actual error is (I left out the rest of the console log since it was fine): Cloning into '/home/deskwizard/A20-armbian/output/cache/sdcard/tmp/libvdpau-sunxi'... remote: Counting objects: 609, done. remote: Compressing objects: 100% (26/26), done. remote: Total 609 (delta 15), reused 1 (delta 1), pack-reused 582 Receiving objects: 100% (609/609), 299.91 KiB | 0 bytes/s, done. Resolving deltas: 100% (407/407), done. Checking connectivity... done. cc -MD -MP -MQ device.o -fpic -fvisibility=hidde…

I am failing creating a bootable SDcard. I download latest image and flash it using etcher. Everything goes smoothly. But when the SD is inserted in the device and the device is powered on, nothing happens (no video output, no LEDs blinking, no network LEDs blinking). I am facing this issue with bananapi M1 (and pine64, but I need to get bananapi working only). This is not SDcard issue, since other distros are running smoothly. This is not PSU issue, since other distros are running smoothly. I was testing Debian Jessie Next 4.9 and 4.11.

Hi, I am using NanoPi M1+ device with Armbian Bionic kernel 4.14.y OS in it. On doing hciconfig ... I get no output. on doing hcitool dev ... the output is none too... What is the issue here? Why can't I see the bluetooth device of the device?

So I have been struggling with my new Orange Pi Zero the last couple of days, I tried everything but was unable to get it working. I followed all debugging steps I could find through google and through this form so i am at the end of the rode. I have tried 2 different SD cards, on which I ran h2testw 1.4 with the following result: Spoiler Card 1: Test finished without errors. You can now delete the test files *.h2w or verify them again. Writing speed: 20.3 MByte/s Reading speed: 63.9 MByte/s H2testw v1.4 Card 2: Test finished without errors. You can now delete the test fi…

Hello everyone, brand new user of BananaPi and armbian, just today and I've spent quite a few hours trying to make the basic setup for WiFi work with no success. Initially I used the server version I downloaded from the main armbian page and then the "nmtui-connect" command. What happens is that it keeps asking me for the password (definitelly correct) and never accepts it. Looking at the NetworkManager logs while this is happening shows me this J Spoiler an 17 22:25:28 bananapim2plus NetworkManager[581]: <info> [1516227928.9166] Config: added 'ssid' value 'The Portal of Infinite Realities' Jan 17 22:25:28 bananapim2pl…

Hi, I am new here so please apologize if I am asking already asked question, but I couldn't find the solution. I am trying to install docker on my orange pi zero 3 which is running Armbian (24.2.0-trunk.519) aarch64, kernel version 6.6.15-current-sunxi64. I have found this post, but I was not able to install docker because I found 2 problem that I don't know how to solve. 1. Installing docker using armbian-config does not work. I install armbian-config, run it as su/sudo, choose docker and install. The installer does something and after it's done it returns me to the same screen where I have chosen docker to be installed. So, no confirmation that I hav…

I am using the latest Armbian image on OPI+. I had a requirement to read a 64Gb USB flash formatted under Windows with the extFat filesystem. Much to my surprise it didn't mount. I thought it was a hardware problem 1st. But then it appeared, that mount doesn't support the the extFat filesystem by default. It is necessary to add the extra packages, but I didn't succeed: root@orangepiplus:/# apt-get install exfat-fuse exfat-utils Reading package lists... Done Building dependency tree Reading state information... Done The following NEW packages will be installed: exfat-fuse exfat-utils 0 upgraded, 2 newly installed, 0 to remove and 9 not…

Hello. I want to test wireguard with the bionic nightlies on my OrangePi Plus 2e, but I'm unable to install the correct linux headers. In armbian-config, it show the "loading kernel modules" and the installing screen 2 times for a second, then goes back to the main screen. If I want to install with "sudo apt install linux-headers, it shows these possible options: linux-headers-udoo 5.52.180715 linux-headers-sun8i 5.52.180715 linux-headers-sun7i 5.52.180715 linux-headers-rockchip 5.50.180630 linux-headers-odroidxu4 5.52.180715 linux-headers-odroidc1 5.52.180715 linux-headers-next-udoo 5.52.180715 linux-headers-mvebu 5.52.1…

I'm having a problem installing a driver. Once compiled correctly, the system gives me an error. Note that I performed the same procedure with : RaspiOS on an arm64 board (RPi4B) with the same kernel version, and it worked. Debian 12 on a PC, and it worked. Armbian on an arm64 board (RPi4B) with the same kernel version, and it worked. Armbian on an armhf board (nanopineocore) with the same kernel version, and it worked. But does not work with Armbian Bookworm on a nanopineocore2 board: epsilonrt@nanopineocore2:~/src/tty0tty/module$ sudo modprobe tty0tty modprobe: ERROR: could not insert 'tty0tty': Exec format error …

Hi, I could not able to download and install any packages, following is the eg. i was trying to install dkms package sudo apt install dkms Reading package lists... Done Building dependency tree Reading state information... Done E: Unable to locate package dkms in addtion apt update is running partial , throwing errors as below sudo apt update Get:2 http://ports.ubuntu.com bionic InRelease [242 kB] Hit:3 http://repository.olimex.com bionic InRelease Get:2 http://ports.ubuntu.com bionic InRelease [242 kB] Err:1 https://apt.armbian.com bionic InRelease Could not wait for server fd - select (11: Resour…

Hi all. I've been working with the OPi3 and PineH64 model B the last days to try installing MESA and DRM drivers to make Panfrost work. This doesn't seem to work. Every time I install Mesa and reboot. It boots into the desktop normally, but a few seconds later the screen goes into one color. Everything is unresponsive. Can't go to a terminal window. Numlock is stuck... Just tried again with compositor disabled. It does take a bit longer before it blocks. But it still happens about a minute in every time. I can't find a ttl adapter for better debugging. I'll order new ones. Both the OPi3 (bionic 5.4) and PineH64(bionic 5.3) have the same issue. I'm using self …

Hi, I've installed Debian Wheezy with 4.0.5 kernel on my BPI and connected an 1To hd with sata. When i try to mount it, i get : "mount: wrong fs type, bad option, bad superblock on /dev/sda1, missing codepage or helper program" I can mount it on my other server ubuntu 14.04 LTS with no error. Do you have an idea why i can not mount it on BPI ? Maybe it's due to the Guid Partition Table ? Tks Nerek

Hi there, I am new to OrangePi and Linux as well and that's probably why I have faced my first problem I could not find an answer on web. I use OP Lite with the latest debian jessie. And there is the problem (or just a bug): after some time of using WiFi (and wwan) I wanted to disable it in order to reduce "excessive" power consumption. So firstly I had disabled it via "nmcli" and after a while I found out about "h3consumption" command. But recently I wanted to install (and download) but none of the above commands were able to re-enable them. Any ideas how to re-enable (besides loading new OS image) ? In addition, I noted that changind "h3consumption" is not a…

Screen capture mpv and mplayer with vpdau outputs it is not possible, on players places window area is black. I tied with fbgrab and shutter. What screen capturing program we have to use for vpdau outputs capture?

Good day everyone, I am running into some issue while trying to update packages on my Nano Pi Neo Plus 2, I am currently running Armbian 23.02.2 Buster with Linux 5.15.93-sunxi64 on the board. I am trying to update my packages with apt-update however the error I am receiving back is the following: E: The repository 'http://mirrors.dotsrc.org/armbian-apt buster Release' no longer has a Release file. N: Updating from such a repository can't be done securely, and is therefore disabled by default. N: See apt-secure(8) manpage for repository creation and user configuration details. Can someone help me out to fix it? Thanks in advance!

Hello everyone, This is my first post to this forum. I am installing a software package on Armbian 5.60 stable Debian GNU/Linux 9 (stretch) 4.14.70-sunxi for the Banana Pi M2+ and I have problem with the uname command in that when I pass the -i option it reports back unknown. Now I am unsure what function the software calls to determine the platform architecture so I cannot script around it, but this issue is preventing me from moving forward now. When I check some of the binaries with file command it reports back ELF 32-bit LSB shared object, ARM, EABI5. Anyway this causes the software I am installing to fail, any suggestions as to how to fix …

I have a rev 1.4 Orange Pi Zero that overheats. I've confirmed this by touch and know it's a known problem. On the legacy kernel, setting CPU to 800 Mhz and RAM to 300 Mhz used to keep things cool. (e.g. "sudo h3consumption -m 800"). h3consumption doesn't exist on 4.14 kernels, so how do I underclock?

hi all, I use cubietruck Linux 3.4.104-sunxi I would like to understand partition ramlog-tmpfs on /var/log type tmpfs (rw,relatime,size=524288k) in fstab is not present. I have the problem that it is always full, more than 90% My cubietruck it is install on nand, I would like to mount the partition of sd, how can I do? regards

I'm trying to figure out what happened in my device this morning. the process that i'm monitoring was interrupted and restarted and i'm want to know that reason, is it internal code reasone or system failure that caused to my process to crash. i'm attaching the /var/log/message piece of logs when my process crashed. can you tell me what happened? I'm using NanoPi2 NEO with latest armbian version for this specific board, Thanks alot Spoiler Feb 1 05:16:13 nanopi NetworkManager[642]: <info> [1548990973.1753] dhcp4 (eth0): address 10.0.0.5 Feb 1 05:16:13 nanopi NetworkManager[642]: <info> [1548990973.1822] dhcp4 (eth…

Hello, I have OPI_PC(or OPI_+2): marian@orangepipc:~$ cat /etc/*-release # PLEASE DO NOT EDIT THIS FILE BOARD=orangepipc BOARD_NAME="Orange Pi PC" VERSION=5.20 LINUXFAMILY=sun8i BRANCH=default ARCH=arm PRETTY_NAME="Debian GNU/Linux 8 (jessie)" NAME="Debian GNU/Linux" VERSION_ID="8" VERSION="8 (jessie)" ID=debian HOME_URL="http://www.debian.org/" SUPPORT_URL="http://www.debian.org/support" BUG_REPORT_URL="https://bugs.debian.org/" and Skystar usb_2_hd_ci(or TT connect 3650). marian@orangepipc:~$ Module Size Used by mali_drm 2732 1 drm 178255 2 mali_drm mali 123208 0 ump 29…

Hello, when I am using unionfs on RPi, in /etc/fstab I change this proc /proc proc defaults 0 0 /dev/mmcblk0p1 /boot vfat defaults 0 2 /dev/mmcblk0p2 / ext4 defaults,noatime 0 1 to this proc /proc proc defaults 0 0 /dev/mmcblk0p1 /boot vfat ro 0 2 /dev/mmcblk0p2 / ext4 ro,noatime 0 1 mount_unionfs /home fuse defaults 0 0 mount_unionfs /etc fuse defaults 0 0 mount_unionfs /var fuse defaults …

Let's say I'm deploying hundreds of warehoused devices employing an H5-based Orange Pi Zero Plus, and I need a reliable distinct identifier for each. In another application we're using the MAC address, but that seems not to be EEPROM-ed on the OPiZ+. So, okay, SOC Unique ID has been mentioned elsewhere (MAC generation on the OPiZ+), but where is it available? cat /proc/cpuinfo does not include "Serial". lshw has a "serial" but I'm not sure that's reliable (I've got a Beaglebone that doesn't show one - and it says /proc/cpuinfo Serial: 00000000). So what's a good low-cost (i.e. not by launching Perl scripts) way to obtain the unique CPU identifie…

Dear All, I get frequent and random disconnection from orangepizero3 onboard wifi with armibian community (self-built) both trunk and 24.02 current kernel, 6.6.26 and 6.6.28 message is always [21738.338021] sprdwl:sprdwl_fc_add_share_credit, 536, mode:1 closed, index:0, share it [21848.116072] sprdwl:sprdwl_fc_add_share_credit, 536, mode:1 closed, index:0, share it [21915.426734] unisoc_wifi unisoc_wifi sta0: sprdwl_report_connection sm_state (5), status: (2)! [21915.426817] unisoc_wifi unisoc_wifi sta0: sprdwl_report_connection Vodafone-CSC failed status code:1! [21919.477424] sprdwl:sprdwl_fc_add_share_credit, 536, mode:1 closed, index:0, share …

Since the CT (the A20 one, not the CT+) has been moved to CSC status, I've build a 22.04/jammy minimal image for my CT, and I figured I might as well share it with you. The only changes to "pure" armbian are some power management debug options in the kernel. https://github.com/IGNNE/cubietruck-armbian-unofficial/releases/tag/22.04-2022-09-09 SHA256 of zip file: 9d0028a9f5c6258a739f52f447bf4400d20fec52358f5006ae8a26b602acdfc0

Sir, I put ubuntu trusty image on Sd card in A20-micro-4gb board. I connected serial cable to uart0 connector which has 4 pins tx,rx,gnd,3.3v. But the log shown is strange. Minicom settings are 115200, 8N1. Please confirm that debug interface is on uart0 or any other pins.

Hi, I updated my image for BananPi from v5.00 (Wheezy) to the latest one (v5.16). Everything works fine, but if I run "apt-get upgrade" I get the message that the package "linux-whezzy-root-bananapi" is reserved (will not be installed). hardware-info says 6 packages to update, but I can't... Is this correct? Do I need this package to be on the latest version? What to do? Thanks. Steffen

today I made an update an got the following message The following packages will be upgraded: hostapd linux-image-sun8i linux-jessie-root-orangepione linux-libc-dev linux-u-boot-orangepione-default sunxi-tools 6 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. Need to get 13,9 MB/15,0 MB of archives. After this operation, 2.048 B of additional disk space will be used. Get:1 http://beta.armbian.com/ jessie/jessie-utils hostapd armhf 2:2.6-4~armbian5.37.180112+1 [363 kB] Get:2 http://beta.armbian.com/ jessie/main linux-image-sun8i armhf 5.37.180112 [12,9 MB] Get:3 http://beta.armbian.com/ jessie/main linux-jessie-root-orangepione armhf 5.37.180112 [485 kB] …

hello, my orangepi3 after the updates of firmware of these days seems to loose eth0, at reboot take eth0 and eth0:avahi with class 169 ip. i made backups (i use a sd to restore the mmc mouting hd and then copy the gzip image) so i have not problems to restore but, i suspect, the previus version is working but the new one not. sorry for my worst english... ab

Quick debugging info, subject says all. Other apps like cap.c or motion or motioneye works perfect and capture and streams live video. Working onliner: ffmpeg -f v4l2 -channel 0 -video_size 640x480 -i /dev/video0 -pix_fmt nv12 -vcodec h264 -preset fast -b:v 2000k -qp 20 ffmpegtest.mkv Working distro Armbian 5.30 root@nanopiair:~# cat /etc/armbian-release # PLEASE DO NOT EDIT THIS FILE BOARD=nanopiair BOARD_NAME="NanoPi Air" VERSION=5.30 LINUXFAMILY=sun8i BRANCH=default ARCH=arm IMAGE_TYPE=stable root@nanopiair:~# modinfo vfe_v4l2 filename: /lib/modules/3.4.113-sun8i/kernel/drivers/media/video/sunxi-vfe/vfe_v4l2.ko description: Video fro…

Morning all, First post here - just got my oPi PC 1.2 with the AllWinner HW chip set up yesterday... Running Jessie headless 5.10, updated to latest (afair, 5.112?). Used the Wget command to try and upgrade the kernal, the blue dos-like UI came up, it checked a few things, then fell down to command prompt, with "Error - unsupported HW". Any thoughts or fixes for this? THX

Lost the login motd following apt-get upgrade. Start-Date: 2016-05-08 10:52:11 Commandline: apt-get upgrade Upgrade: linux-image-next-sunxi:armhf (5.04, 5.10), linux-headers-next-sunxi:armhf (5.04, 5.10), linux-trusty-root-next-cubietruck:armhf (5.04, 5.10), linux-dtb-next-sunxi:armhf (5.04, 5.10), linux-firmware-image-next-sunxi:armhf (5.04, 5.10) End-Date: 2016-05-08 10:56:33 I imagine I have to reinstall a pam config file?

Hey guys, I was wondering why the Browsers doesnt support H/W Acceleration, now i found out its because the Mali Driver is outdated. I installed also Chromium and forced it to use the GPU, well at least it trys but i got a bunch of errors. Is there a way to add a new Driver? Tried also to compile it myself but i was never that deep into linux and never had to compile drivers, here are the sources: http://malideveloper.arm.com/resources/drivers/open-source-mali-utgard-gpu-linux-kernel-drivers/ I think the current Kernel uses a horrible outdated r3p0 Version and a new one is r7p0, at least r4p0 is needed which should work with Chromium and finally add H/W Accelerat…

Hi, haven't touched my system for quite a long time, now I'm running into problems while trying to uprade system: Err http://apt.armbian.com trusty/main armhf Packages 404 Not Found ... W: Failed to fetch http://apt.armbian.com/dists/trusty/main/binary-armhf/Packages: 404 Not Found W: Failed to fetch http://nginx.org/packages/mainline/ubuntu/dists/trusty/nginx/binary-armhf/Packages: 404 Not Found [IP: 95.211.80.227 80] E: Some index files failed to download. They have been ignored, or old ones used instead. E: Couldn't rebuild package cache aptitude upgrade The following packages will be upgraded: linux-trusty-…

Hi, Since recent I have an issue that my Orangepi doesn't start anymore. My microSD is fine (did a full diskcheck using badblocks on ubuntu), en I can access all the files without issues. However, it doesn't want to boot. Every time I try to boot it (Orangepi pc), it gives the first black screen until starting kernel, and then gets stuck on the blinking underscore. For information: I have an Orangepi PC and Armbian 5.32 with mainline kernel. Now, this happened after I did an apt-get upgrade (incl. kernel upgrade) from 5.30 to 5.32, and then didn't reboot, but my orangepi had a short power interruption. After this it didn't want to start…

I need help i won´t only make an update on cubietruck and bpi-r1 to the last version 5.25 or 5.27 not more. I make apt-get update and apt-get upgrade then i have 5.31 i won´t only 5.2x. Gives an way for an update to 5.2x sorry for my poor english

Hi I have an Orange Pi PC running "ARMBIAN Debian GNU/Linux 8 (jessie) 3.4.113-sun8i". Can I update to Armbian Strech kernel 4.14 directly without lose of data and configurations? How can I do it? Thanks.

Hello All, I'm using a cubitruck and I'm still on 5.25 mainline. I just saw that there is already v5.30 available but there are no updates available. apt-get update && apt-get upgrade tells me there is nothing to update. What am I doing wrong? Gesendet von meinem LG-H815 mit Tapatalk