Allwinner sunxi

Hello world !, I am running bananapi and cubietruck boards on Ubuntu Thrusty and legacy kernel 3.4.109. I am using these board for remote servers but before critical upgrades like upgrade of kernel which can cause unusable system I need powerdown these boards and do backup of entire sdcards. But commands "poweroff" or "init 0" with battery connected everytime causes reboot on both of them while without battery connected these command shutdown boards properly. Any ideas ?

Hello! I am working on a project that requires coss platform development. Optimally I wish to connect the B-Pro directly to my computer in order to access it from there. Is there any work on this available? I know the BeagleBone can do it for example, bt haven't found anything related to the Pro. Any Information would be inmensely useful and appreciated. Added to this, I want to know if any of you have had any experience with QT for the BPro as well. Thank you!

Hi, I am running Armbian Jessie (4.11.6-sunxi) on Banana Pi M1. For reading and writing SD cards I use linux dd cmd on another box. I do not have a Windows system. My question is this: My SD card is a 16Gb device. With gparted I can reduce the size of the system to a partition that would easily fit on a 4Gb device. But when writing the .img file dd will still see and write an image of 16 Gb There must be a way to make an image that can be written to and booted from a smaller device to save resources on the backup disk. Can anyone point me in the right direction ?

Hi every body, I have a Orangepi Plus 2E as you know with 16GB eMMC. Have installed armbian via SDCard before and executed nand-sata-install to copy it to eMMC. But currently need to get an image to install on another one. So there must be an opposite action like install_to_sdcard (in raspbian) but I couldn't find it.

Hello, When I can backup my system who is in the emmc ? in another sdcoard or in usb key to image file ? Thanks

Because of my mistake After Update of kernel 4.19..... cubietruck don‘t Start https://r.tapatalk.com/shareLink?share_fid=1017055&share_tid=8857&url=https://forum.armbian.com/index.php?/topic/8857-After-Update-of-kernel-4%2E19%2E%2E%2E%2E%2E-cubietruck-don%E2%80%98t-Start&share_type=t I wan‘t To do a Backup of my Running System or a Image so i can Flash it on a other SD Card or restore the Backup Thank you Gesendet von iPhone mit Tapatalk

Hi Igor and everyone else who is supporting this forum with their time and effort. Thanks in advance for reading this and giving it a thought! Question: Any idea where I could turn off mounting /dev/sda1 read only? Problem description: Before moving cubietruck to a new location I did an dist-upgrade, after that a reboot didn't work. First I was asked for debug and root password. After editing I did try to solve my problems without using your help. But I did not succeed yet. Neither with installing a new image and restoring my lamp-stack from backup nor with solutions I found in this forum (changing u-boot config and so on). I did backup sd-…

I compiled Armbian-unofficial_23.11.0-trunk_Olinux-som-a13_jammy_current_6.1.63_minimal.img Burn it to sd card, and tried to run it on my old Allwinner A13 laptop, and is got this Error message: U-Boot 2023.10-armbian (Oct 14 2023 - 01:13:59 +0000) Allwinner Technology CPU: Allwinner A13 (SUN5I) Model: Olimex A13-Olinuxino DRAM: 512 MiB Core: 59 devices, 21 uclasses, devicetree: separate WDT: Not starting watchdog@1c20c90 MMC: mmc@1c0f000: 0 Loading Environment from FAT... MMC: no card present ** Bad device specification mmc 0 ** Setting up a 1024x768 vga console (overscan 0x0) In: serial,usbkbd Out: serial,vidconsole Err: …

Hi, I have Orange Pi Zero, that don't have jack 3.5, I welded one jack 3.5 female in the correct pin and the music sounds good, but the voices sounds bad, what's wrong? Melody good, voice bad system: Armbian_5.25_Orangepizero_Debian_jessie_default_3.4.113 Sorry for my bad English

I was searching for a UPS for the Banana classic and then saw you just can connect a battery to it. What i can't find information about if it needs to be unprotected or if i can use my protected Keeppower 18650 Li-Ionen's that i already have for my flashlight anyway. And is there anything special i need to do in Armbian? Just connect the battery and it works? Hard to find information :-(

Hi all, I recently bought a Banana BPI M2 Zero for a personal human-machine interaction project as this was the only (cheap) available option w.r.t. my specs (HDMI, entry-level OpenGL GPU, enough CPU power for the task). I got a version with Allwinner H3 (which in my view is good) and also read through the H3 buyer's guide. According to that guide, the CPU should be sourced by 1.3V, but to my (positive) surprise, I measured only 1.15V at the output coil (after the coil and against GND, of course) of the SY8113 regulator. However, there's certainly something not working as expected from the schematics: both, the SY8113 and the SY8089 1.2V regulators (SYSTEM+CPU…

Hi, is the image for the M1 and Pro the same? Because after downloading, the file name is "Armbian_5.04_Bananapipro_Debian_jessie_4.4.3". On the download page for M1 and Pro the download links point to the same file. Looking at http://mirror.igorpecovnik.com/i see only 5.00 for the M1. Another question i have: After the login i see 12 updates and i should run APT. Since years I'm using aptitude since it is the preferred and newer program for Debian. So the question is if i can safely use aptitude? Or is there something pre-installed and i mix up the package management. I will never understand why every tutorial on the web is using APT.

Yesterday I have installed Armbian to my 3-years-old banana-m1 (previosly ran on bananian 16.04 with 4.4.66 kernel) Tiday I have installed rtorrent and tried to download 44 gb file using rtorrent (with lot of seeders). Few minutes, and I got massive bunch of errors [11583.126199] blk_partition_remap: fail for partition 2 [11583.126314] blk_partition_remap: fail for partition 2 ... [11583.136689] blk_partition_remap: fail for partition 2 and USB drive reconnected in ro mode. Then I remount drive, started torrent again and exactly same issue, USB drive disconnected. USB drive connected with external power…

Hi guys, I searched for an answer but couldn't find a working one. Most answers from 2017 and it's not possible to answer there. Could someone please explain how to use the wifi and bluetooth module on Armbian 20.08.7 Bionic with Linux 5.8.13-sunxi (minimal without desktop)? ____ ____ _ __ __ ____ | __ )| _ \(_) | \/ |___ \ _ | _ \| |_) | | | |\/| | __) || |_ | |_) | __/| | | | | |/ __/_ _| |____/|_| |_| |_| |_|_____||_| Welcome to Armbian 20.08.7 Bionic with Linux 5.8.13-sunxi System load: 2% Up time: 35 min Memory usage: 8% of 998M IP:…

Hi! Anyone use display? GND: Shared VCC: Power supply SDA: Bus Information SCL: clock data bus From site: https://github.com/vvromanov/cb_i2c_lcd https://github.com/vvromanov/cb_i2c_lcd/blob/master/i2c_lcd.c#L28 But how to right connect display?

Hi on my Banana PI I have set no swapfile/partition since I never gonna use swapspace ram is gonna be enough. When I reboot I always find 499MB of swap swapon -s Filename Type Size Used Priority /dev/zram1 partition 255728 67052 5 /dev/zram2 partition 255728 66836 5 But I can find no entry of /dev/zram1 nor /dev/zram2 in /etc/fstab. Can anybody explain me how is this possibile? And how to manage those partitions? I found another /dev/zram0 which I think has to deal with log2ram since it is mounted on /var/log, is this corre…

Hello community, Kernel 4.3.x should have support for DMA engine on A20 boards, see: http://linux-sunxi.org/Linux_mainlining_effort#Merged_into_4.3 Does / should this also improve the SATA write performance? After update to kernel 4.3.3 from apt.armbian.com I cannot see any big write Performance increase... thanks for comments... best regards and a happy new year... holsteiner

Hi, I installed the main line kernel for Banana Pi and connected a USB/Wifi dongle. The device connects correctly to the wireless network but becomes unreachable after a while. When the issue occures and I try to ping the device, it answers the first ping and then becomes unreachable, via Wifi interface but also via the ethernet interface. I can wait for an hour or so, then I can do a ping (only one) then the device becomes unresponsive. I have to restart the device (power on/off) in order to be able to connect via ssh, but I can work for a few minutes only, then network goes down again. I don't have a screen to connect to the…

Hello everyone! I have Banana Pi and installed Ubuntu desktop Xenial 4.9.12. I have a USB wifi stick and Ubuntu recognizes , and USB works well. The problem is when I try to set my Banana Pi as an access point, then we Ubuntu reported to have root privileges. How to get root privileges in Ubuntu Xfce graphical environment? How to stop autologin before lifting graphic Xfce desktop, and to ask for the root password? Please help, and thank you in advance

I am successfully using Armbian Current on my Banana Pi. I have a 120GB usb SSD drive. I'd like to boot from it - my other Banana Pi with the same system boots from SATA connected HDD no problem. When I boot the device, I can see the drive using sudo fdisk -l as /dev/sda1 I can also get the UUID and everything. I've modified the /boot/armbianEnv.txt file and changed the UUID, but I can't get the machine to boot. I tried also to change the UUID to /dev/sda1. Didn't help either. When I boot with HDMI connected, I can see the kernel iterating through USB bus and the result is "no USB storage device found" and that's it. …

Hello Igor, Hello community, What I have: 1 Raspberry PI B (its just a toy) 1 Radxa Rock (bad SW support, will replace Odroid C1 in case AP is running stable, maybe never) 2 Banana PIs (file server) 1 Odroid C1 (AD DC and AP, but actually I have no trust in the hardware) since one of my Banana PI has trouble with SATA (will not initialize, but seems to be NO power problem) I will buy a new A20 board... - Cubieboard 2: too old, no Gigabit LAN, too expensive from my point of view - Cubietruck: too expensive from my point of view - Orange PI: reading forums... seems to have some HW problems, USB Host and/or SATA not functional, etc.) - Banana PI: I like…

Hello igor! Thank you. The last build 3.0 jessie with kernel 4.0.4 works fine. But i had some problem with first boot after installation. After i try to change password for root bpi drop connection and after reconnection password still was 1234. I tried about 5 times. I had to reboot bpi with disconnect power and after reboot i was able to change password normally.

Hi, just installed Armbian 5.38 mainline (both debian server or Ubuntu server fresh installation). There are two processs eating cpu (kworker), and I read some other users have the same issue, but there is a solution? Other problem: I use this board with Bluetooth dongle to monitor my solar plant. Sometimes Bluetooth dongle disappear from lsusb or hcitool scan tell me device is busy with no reason, just unplug and reconnect usb dongle and all restart to work again (tried with two different Bluetooth dongle, this dongle works with no problem at all in another orange pi pc, no disconnection or disappear). The pow…

Hi all, I'm interested in running canbus on Banana Pi (A20). I have problem with setup canbus. Some info about system: ARMBIAN 5.38 stable Debian GNU/Linux 9 (stretch) 4.14.18-sunxi in armbian-config -> System -> Hardware only "can" is enable and MCP2551 transreciver is connected to can rx/tx banana pinout. lsmod | grep can: root@bananapi:~# lsmod | grep can can_bcm 24576 0 can_raw 20480 1 can 20480 2 can_raw,can_bcm sun4i_can 16384 0 can_dev 20480 1 sun4i_can Next setup interface: ip link set can0 type can bitrate 125000 restart-ms 10…

Hi, I read about the Allwinner Security System Cryptographic Accelerator. Is somebody actually using it with cryptsetup or OpenVPN? Is it powerful like Intel AES-NI? Thank you! Kind regards, matt

i have a project and i need to activate the vga output on my banapi m1. I searched the forum and found this link https://forum.armbian.com/topic/6292-banana-pi-enable-tv-outrca/ but I think it only applies to old kernel versions. The only reference I entered for these more recent versions was this https://docs.armbian.com/Hardware_Allwinner/#how-to-reconfigure-video-output but I don't know how to activate the video output Can someone help me? thank you

Hi everyone. When I tried plug in my banana pi to tv (rca video(AV),). I can see only boot(where label armbian). maybe need special resolution, i tried 800x600, 640x480, nothing.

Hi.Can you help me fix this problem.Can't use usbwifi wl167g(need like reciever). Network-manager show(wifi enable) but firmware missing. Tried to install RT73_linux_STA_DRV1.0.3.6, have error, when step make, rtmp_main.c error "-march=i686". In new version desktop ubuntu wifi working, but shows slow video(I guess many improvements "use" a lot of resources).

Before installing this Armbian legacy kernel (3.4.109), I was using a Bananian-based image with OpenMediaVault (the so called BanaNAS image) and was getting regular 30MB/s transfer rates to my Samba shared hard drives (USB and SATA). My PC and Banana are connected through a gigabit switch, and working at 1Gbps. After installing and configuring the new Armbian image, I notice my transfer rates were now around ~23MB/s which was odd. After trying to change some smb.conf parameters and getting nowhere, I decided to test just the network performance by setting up a simple web server on my PC and doing a wget -O /dev/null http://<my PC-IP>/test.zip of 3Gb. The values …

Hey there, I am a long time user of your armbian operating system. It is great, I am using it for a simple home NAS system. But I have found one problem with armbian, which is very annoying: My standard Banana Pi keeps loosing the HDD Ive connected over Sata. It is a 3,5" Seagate Barracude 3TB drive formated as Ext4. It gets 5V and 12V power and runs quite perfect, as long as it has something to do. It spins up and down as I configured it. But when I leave the pi for a longer time period unattended (no workload), and the harddrive stays in spindown-mode too long, it wont identify the HDD anymore. The mount point and the /dev/sda are gone. I need to powercycle t…

hi guys sorry for simple questions , i installed Armbian_5.91_Bananapi_Debian_buster_next_4.19.59.7z on banana pi M1 , after login i try to statx for have desktop but not start , tell me not found , i try to search in google but not find nothing about this , i saw all tutorial start automatically the desktop enviroments, is possible install ?? or exist a guide?? thankz and sorry agin for simple questions

bananapi m1 armbian 5.20 configure smplayer acelered ? thanks

Hello. From moment when i flashed armbian to SD card and boot it up on Banana Pi M1, random reboots started to show. Ya'll should know that i'm hosting Plex and Tautulli on that. It's pretty much handling these servers without big problems but i'm constantly getting these random reboots. Well, i looked into /var/log/syslog to see what is happening. It looks like before every booting session there's cron job couple of hours before reboot. Maybe that's the reason? I can post whole syslog here from jan 5 till feb 2.

I have a working BPi M1 with [ 0.000000] Linux version 5.15.25-sunxi (root@d72d155687c7) (arm-linux-gnueabihf-gcc (GNU Toolchain for the A-profile Architecture 8.3-2019.03 (arm-rel-8.36)) 8.3.0, GNU ld (GNU Toolchain for the A-profile Architecture 8.3-2019.03 (arm-rel-8.36)) 2.32.0.20190321) #22.02.1 SMP Sun Feb 27 09:23:25 UTC 2022 Due to inconvenient USB placements, I thought using OTG micro USB (the one right next to the SD slot), but it doesn't seem to be operational. I bought a Micro USB Male To Female OTG Adapter Cable, but the attached devices are not detected neither connected to OTG port, nor to the normal power-in micro USB connector (lo…

i install armbian into banana pi M1 . cat .asoundrc-X pcm.!default { type hw card 2 } ctl.!default { type hw card 2 } and get sound from TV namely HDMI . then i attach HDMI cable to sharp TV . $ aplay -l **** List of PLAYBACK Hardware Devices **** card 0: sunxicodec [sunxi-CODEC], device 0: M1 PCM [sunxi PCM] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: sunxisndhdmi [sunxi-sndhdmi], device 0: SUNXI-HDMIAUDIO sndhdmi-0 [sunxi HDMI PCM] Subdevices: 1/1 Subdevice #0: subdevice #0 ~$ cat .asoundrc pcm.!default { type hw card 1 } ctl.!default { type hw card 1 } from sharp TV , i cannot get sound from TV, i get it only from audio out . i c…

# PROBLEM: Recent bananapi m1 images (and other A20 boards?) have no kernel headers, and armbian-config is not working so no hardware support. # SOLUTION: Armbian_23.02.2_Bananapi_jammy_current_5.15.93.img.xz Take this image and install the headers manually - or update to recent ones from here (not all work). NOTE: Armbian_23.02.2_Bananapi_jammy_current_5.15.93_minimal.img.xz While is the same build, cannot unfreeze kernel changes in armbian-config gui Flash SD and drop the 3 kernel packages in /root/ After first boot run $ apt upgrade && apt upgrade --fix-missing Unfreeze kernel with $ armbian-config -> sys…

Hi all, I've purchased a second hand banana pi M1 board with an BPI 7 inch LC connected on prarallel RGB. The board and the LCD is working with last bananian distribution and https://github.com/BPI-SINOVOIP/BPI-M1-M1Plus-Configuration/blob/master/fex/BPI_M1_7lcd.fex. I'm trying to make both working with Armbian but I'm lost. I don't find the script.bin, /boot/script.bin or anywhere. And no idea how to set /boot/armbianEnv.txt for the LCD. The kernel have been rebuilded using this topic. Any help will be apreciate. Regards Hugues

So far I was used to the Grub (and lilo) boot manager(s) but the Armbian 5.31 Bananapi Debian jessie next 4.11.5 image does some things differently. I have found the file /boot/armbianEnv.txt but none of the websites I found described what I should do with it. I tried to copy it to /etc but the changes did not take effect. I would like to remove the logo and have verbose boot messages. Could somebody help me to get there, please?

I have a big problem with the latest Armbian images, the problem not only persists with the latest versions, with the previous one the same thing happened to me with the old Ubuntu images, it works without problems with the old kernel, I have a video published with the problem since it works but at certain times the device turns off and does not turn on a single LED light until I reconnect it, I thought it was a problem with the power supply but not with the old Ubuntu images it works and even with the game emulators of the lakka-tv image, so I came to the conclusion that the hardware is in good condition, therefore check what the fault could be because the computer usual…

I had successfully installed Armbian_2022.08.8_Bananapi_bullseye_CLI_5.15.74 on my M1 and copied the system to an SSD which I had attached to the SATA port. Then I had updated the UUID in armbianEnv.txt and running the system from SSD was working fine. The system was running headless in my closet for about 2 months, and I even had no problems to remotely restart the device until today, when it did not come back up after a reboot. I took it from the closed and hooked it to a monitor just to see the following error messages: ** Bad device specification mmc 0 ** Couldn't find partition mmc 0 I suspected a broken SD card but a check on my Ubuntu de…

Hi guys, I'm getting this error while trying to boot my Banana Pi with an SD card. Hit any key to stop autoboot: 0 switch to partitions #0, OK mmc0 is current device Scanning mmc 0:1... Found U-Boot script /boot/boot.scr 2447 bytes read in 211 ms (10.7KiB/s) ##Executing script at 43100000 Wrong image format for "source" command SCRIPT FAILED: Continuing... scanning bus for devices... Found 0 device(s). SCSI device 0: Device 0: not available [...] I'm coming from using Lubuntu with no problems for nearly a year. The SD card works no problem (or at least it worked perfectly fine with Lubuntu). I also tested with a way faster microSD 64GB I usually hav…

Hi everyone, im playing quite a while with my BP and OMV simplenas Images. for perfomance reasons i decided to test armbian but i have some trouble with it. I prepare the SD boot them up change my root pw and set a user ... so far so well but everytime i tried a sudo apt-get update sudo apt-get upgrade my system freeze at the point where it should setting up linux-headers-sun7i 5.23 ... compiling headers please wait... first i thought i only have to wait but after 12h waiting while 100% Cpu usage i was quite sure there is somthing going wrong. did anyone saw this problem before and solved it? tried armbian Vanilla( xenial, jessie) also lagacy (xeni…

Hi to all, i´d try to setup a Banana PI M1 as AppleTalk Printserver because my old LaserWriter 4/600 only got a LocalTalk Interface. But the Kernel didn´t support AppleTalk, i compiled it in myself successfully. After i installed Netatalk 2.2.5 and do a nbplkup, the Bpi answers: bananapi:netatalk 65280.79:4 bananapi:Workstation 65280.79:4 No Printer, no Bridge. I think, the buildin Eth0 dont route AppleTalk Pakets. I tryed Bananian, armbian and strech without success. So, what shall i do? Hallmackenreuther

Ran the following command on my Banana PI to move to the HDD (SATA) nand-sata-install Install was a success: However I think some stuff went wrong during the transfer. Whenever I open a file in nano I get the following error: Error in /etc/nanorc on line 260: Error expanding /usr/share/nano/*.nanorc: Inappropriate ioctl for device I cannot run apt-get update anymore: pi@bananapi:~$ sudo apt-get update && sudo apt-get upgrade Hit:1 http://security.debian.org buster/updates InRelease Hit:2 http://deb.debian.org/debian buster InRelease Hit:3 http://deb.debian.org/debian buster-updates InRelease Hit:…

U-Boot SPL 2018.11-armbian (Feb 08 2019 - 08:51:22 +0100) DRAM: 1024 MiB CPU: 912000000Hz, AXI/AHB/APB: 3/2/2 Trying to boot from MMC1 U-Boot 2018.11-armbian (Feb 08 2019 - 08:51:22 +0100) Allwinner Technology CPU: Allwinner A20 (SUN7I) Model: LeMaker Banana Pi I2C: ready DRAM: 1 GiB MMC: SUNXI SD/MMC: 0 Loading Environment from EXT4... ** File not found /boot/boot.env ** ** Unable to read "/boot/boot.env" from mmc0:1 ** Setting up a 720x576i composite-pal console (overscan 32x20) In: serial Out: vga Err: vga SCSI: SATA link 0 timeout. AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl SATA mode flags: ncq stag pm led clo only pmp pio slum part ccc apst …

Hello! I've downloaded the current images for BananaPi M1 offered in the site, as "Community Maintained" builds, but none of them is capable of producing video output from HDMI nor composite video. Both the Ubuntu jammy and Debian12 versions lose the video output as soon as the kernel starts to load, after the u-boot screen. I tried the desktop and server images, without any luck. With the older 5.x kernel, the ubuntu-jammy image that I've downloaded before loads fine. I know it's an old board, but it still gives me some amusement time tinkering with it and playing retro games. Anyone experiencing the same problem? Thanks!

Hello. I have a problem with SPI interface I already tried to compile SPI interface as module in kernel config and then to turn it on, but what I get is: root@bananapi:~# modprobe -v spidev insmod /lib/modules/4.13.4-sunxi/kernel/drivers/spi/spidev.ko root@bananapi:~# lsmod | grep spidev spidev 16384 0 root@bananapi:~# dmesg | grep spidev *nothing* root@bananapi:~# ls /sys/class/spi_master/ spi32766 I found a topic about enabling SPI on Banana Pi Pro here. But after repeating same steps(I mean decompiling dtb, adding spidev and compiling it back) for Banana Pi M1 it doesn't boot any more. After U-boot the cursor blinks for about 10 seconds a…

Hello, What kind of speed can I expect from the ethernet on the BPM1? It's told to be 1Gb/s, but I am not even getting near that speed: wget https://cdn.kernel.org/pub/linux/kernel/v5.x/linux-5.4.5.tar.xz ... linux-5.4.5.tar.xz 100%[==============================================================================================>] 104,37M 4,43MB/s in 24s 2019-12-18 22:38:33 (4,35 MB/s) - »linux-5.4.5.tar.xz« gespeichert [109435988/109435988] BPM1 and the router are set to 1000Mb/s, and the download line works at more then 100Mb/s. Downloading the same file on my PC shows a considerably difference: …

In the last weeks I've successfully installed Armbian Debian Stretch 5.59 onto a Banana Pi M2 Berry, now I'm trying with a Banana Pi M1. From https://www.armbian.com/bananapi/ I've downloaded the Debian Stretch image and wrote it to my 4GB SD-card using Etcher (on Windows 10) - Etcher meant it was successfully after writing. I've safely ejected the SD-card from Windows, plugged it into the Banana Pi M, but it tries to boot from the network. Then I've taken a look at https://dl.armbian.com/bananapi/archive/ and downloaded Armbian-5.59 Debian Stretch image, wrote it with Etcher again, booted. Same issue. It shows a red armbian logo with "initializing boot loader…

Hi, I am totally new to Linux, but already managed to run OMV on my Banana Pi M1+ with Plex and other services I wanted on Armbian. Now I tried to run Kodi, so it could serve me both as NAS and HTPC. Firstly, I have installed xorg, then lightdm and set it up for autologin, which is working correctly. Then, I have installed Kodi 16 from git, but only gray box appears and then vanishes and screen stays black. My first impression was it is lacking GL drivers, so I have followed this tutorial: https://forum.armbian.com/index. ... pi-orangepi-pc-etc/, tested and everything seemed to be ok. I installed Emilia Pinball to check additionally - it renders correctly. Still, when …

Hi, has anyone been able to use the BPi 7 inch LCD (S070WV20-CT16) with Banana Pi M1+? I took the FEX file from this how-to: https://sinovoip.blogspot.hu/2015/08/how-to-banana-pi-bpi-m1-7-inch-touch.html and put it the "bin" subdir of the Armbian image (Armbian_5.20_Bananapipro_Debian_jessie_3.4.112_desktop.7z), then symlinked from the script.bin in the root dir to it (I did not change anything else in the image) and rebooted. At boot when it comes to starting the kernel, it always resets (starts the boot process again and again). When I use (symlink to) the "built-in" bananapim1pluslcd7.bin in the image, the same result: starts the boot process again a…

Hello everybody. AFAIK Banana PI M1+ share the same costumed Armbian OS with Banana Pro. The Armbian can run pretty well without any changes on my Banana Pro. The problem is, with the same OS image, the on-board WiFi is not working and i can't remember what im doing (what i remember is I do something inside /boot directory), then the WiFi is detected and working properly on my Banana Pi M1+. My simple question is What is the right way to configure Armbian for Banana Pi M1+ after installation? I assume all the default configuration is for Banana Pro and we need some tweak for Banana Pi M1+ especially to enable on-board WiFi and to use GPIO properly.

Hi there, I have a Banana Pi M1+ and connected to it Silicon Power SSD 60 Gb. I've faced with the following error: Kernel panic - not syncing: Attempted to kill init! exitcode=0x00007f00(see screenshots). Startup: https://drive.google.com/open?id=1s_1mkJWXTC02TnSyVlX8oZZQDaJpgXYu Kernel panic message: https://drive.google.com/open?id=1oDgmnrOspkYy5DY5bobFLTJSE3RJOVE6 I downloaded and wrote Armiban to the SD card from this link: https://dl.armbian.com/bananapi/Debian_stretch_next.7z, It started well. Then I performed apt update && apt upgrade -y and reboot the system. After that I've used 'nand-…

Hi guys, i've the following problem in my attempt to customize/study armbian: - succesfully compiled Armbian_5.17_Bananapim2_Debian_jessie_4.8.0 on Ubuntu 16.04 with default config; - burned image on SD card, (on the same card burned with Armbian_5.14_Bananapim2_Debian_jessie_4.6.2_desktop and the system boot is ok) - the board enter in this reset loop: U-Boot 2016.07-armbian (Sep 11 2016 - 10:06:05 +0200) Allwinner Technology CPU: Allwinner A31s (SUN6I) Model: Sinovoip BPI-M2 DRAM: 1 GiB MMC: SUNXI SD/MMC: 0 *** Warning - bad CRC, using default environment HDMI connected: Setting up a 1680x1050 dvi console (overscan 0x0) In: serial Out: vga Err: vga…

Hi, I installed 'Armbian_5.00_Bananapim2_Ubuntu_trusty_4.4.1_desktop' image recently, because I had some problems with sinovoip images (strange hugh? ). One of the problems was the gigabit ethernet slowness, but it seems with the armbian OS is still the same. I get around 30Mbit/sec only on iperf tests. I have tested my network connections & router and I can get much more speed through other computers, but the banana shows this slow mark. The gigabit ethernet connection was one of the reasons tu buy the banana, but I don't know if I am doing something wrong, if I have a bad unit, etc... I have found some internet benchmarks but all of them are based on the…

Hello there, Some time ago there was a note about "no sound in M2" and what about present time? Just tried 5.24 and still: root@bananapim2:~# lsmod Module Size Used by evdev 9348 0 ir_lirc_codec 4088 0 lirc_dev 6245 1 ir_lirc_codec sunxi_cir 3159 0 sun4i_ts 3350 0 sun4i_ss 13314 0 uio_pdrv_genirq 2780 0 uio 6272 1 uio_pdrv_genirq cpufreq_dt 2856 0 sun4i_codec 10232 0 snd_soc_core 97900 1 sun4i_codec snd_pcm_dmaengine 2770 1 snd_soc_core snd_pcm 57610 2 snd_pcm_dma…

Good morning, I am using a version compiled with your script for Banana Pi M2 Berry to build a network HiFi streamer, and I am satisfied with it. I have installed LMS and Squeezelite, and everything is working great. Now I would like to add an Innomaker HAT AMP that has a 12V power connector that powers the Raspberry Pi at 5V via GPIO. The GPIO of the Banana Pi M2 Berry is declared compatible with the Raspberry Pi3, but I would like to be sure before frying the board in case it is not. Can you please confirm the total compatibility of the GPIO connector of the Banana Pi with that of the Raspberry Pi? Thank you for your response.

Tried image from main download page would not boot https://www.armbian.com/donate/?f=https://dl.armbian.com/bananapim2/Debian_jessie_next.7z Tried image from archive would not boot https://dl.armbian.com/bananapim2/archive/Armbian_5.24_Bananapim2_Debian_jessie_next_4.9.5.7z Tried using tool to build my own image and that also failed to boot. Tried older image which did boot, https://dl.armbian.com/bananapim2/archive/Armbian_5.20_Bananapim2_Debian_jessie_4.7.3_desktop.7z and tried adding new kernel using tool, after loading deb files it also would not reboot before reboot OS was not responding correctly. What I would like to accomplish is add my own pat…

Hi. I got NO SIGNAL on my TV during boot after "Starting kernel". Same with dev image builded from tool and with stable image too. Thanks.

I've been trying to bring up Armbian on my Banana Pi M2 Ultra (with A40i SoC). First I tried using the community rolling release, and then building it myself from source code. In every case, it was failing to boot; on the HDMI console it was hanging at the stage where the initrd was attempting to scan for the root partition. ("Scanning for btrfs filesystems") Taking a closer look at the verbose output of the UART console during a boot attempt, I saw that there was an error message about the sunxi-mmc device driver experiencing a failure while it was enumerating the EMMC chip: [ 4.136553] mmcblk2: mmc2:0001 8GTF4R 7.28 GiB [ 4.144362] sunxi…

Hello. I am new to Armbian. My Banana PI M2 (already a disappointment, bad purchase on my part) is up and running but will not reboot all the way. It shuts down but does not restart again. Any ideas how to go about troubleshooting and fixing this? It is a deal breaker for what I planned to be a headless system. It needs to be restartable without physically pulling the plug to do so.

I am listed as the community maintainer for the Banana Pi M2 Zero. I haven't actually done any maintaining but I am thinking about doing so now. But before I do, a couple of quick questions. 1) The latest build (as far as I can see), is Aug-31st, 2023. Do I have that right? Or am I missing something? 2) The main page for the Banana Pi M2 Zero (https://www.armbian.com/bananapi-m2-zero/) shows a link to Armbian_community_24.11.0-trunk.273_Bananapim2zero_bookworm_current_6.6.54_minimal.img.xz which is for "Minimal/IOT images with Armbian Linux v6.6". Is that a generic build for all community maintained sunxi hardware? Or is that a specific Banana Pi M2 Zero …

I did try the latest Armbian 23.5 Bookworm on my banana pi m2 zero with allwinner h3 chip and I couldn't get the USB OTG port working (i. e. no keyboard recognition) and eth0 also did not work. After a lot of searching I found an old image (BananaPi-M2zero_Armbian_2021.08.1_bullseye_CLI_5.10.60.img) which did work. I wonder what happened to the kernel Kernel 6.2.y edition and why those crucial hardware features are not working anymore. Is there a vault somewhere of older armbian software revisions?

I don't own banana pi but I'm thinking of buying it for the project we're going to do. I have raspberry pi zero but mediapipe is not working. I'm thinking of doing image manipulation and this is the most important library in my code. That's why I'm trying to do a detailed research because my budget is limited. Thank you for your help 💯

Hi, I recently purchased a Banana Pi M2 zero, and I can't seem to get the OTG port to work with any kind of operating system. I have tried all of the normal remedies like cable issues, power supply, etc. With no luck. I know Armbian is usually the best OS for these little boards, but I can't seem to get a keyboard or mouse to work with it. Although it boots up just fine. Any help would be greatly appreciated!

I got myself a Banana Pi M2 Zero (with H3 chip) and am running Armbian (Armbian_21.08.1_Bananapim2zero_buster_current_5.10.60) on it. I have enabled SPI by adding the spi-spidev dt overlay. Now I want to use both CS pins at the same time so that I can connect two devices. The spi-add-cs1 overlay doesn't change anything so I researched a bit and found this custom overlay. Unfortunately it didn't work too and there is still only a single spidev available. Is there any way to enable both of them at the same time?

Hi, We are using trying to use Banana PI M2+ for our application , we mainly use UART and Ethernet on module. uname -a details are below. Linux bananapim2plus 5.15.74-sunxi #22.08.6 SMP Tue Oct 18 07:00:33 UTC 2022 armv7l armv7l armv7l GNU/Linux We Enabled UART 3 by adding below command line on /boot/armbianEnv.txt as overlays=uart3 Pin Number: 8 & 10 We can able to transmit and receive data for uart3. We need to enable one more UART to communicate, We tried overlays=uart2 , We failed to enable, Can anyone guide us to enable one more UART in Banana pi M2+ Regards, …

Hi, I received a Banana Pi M2+ board on which I installed ARMBian. Their is only one problem for sound. Audio out is only available on HDMI. As I will use this board with no display, keyboard and mouse connection how may I get this board playing sound ? Two ways but I do not know which one is possible : 1) does it exist an HDMI to sound 3.5mm jack adapter ? 2) which USB bluetooth dungle works perfectly on ARMBian I may use to pair this board to a portable bluetooth speaker ? Sincerely thanks. Have a nice day. Miguipda ;-)

Hi all, I'm new here, and first of all I want to greet you. Last week I got a brand new Banana PI M2+, and tried to install the latest armbian Image on SD card. So far so good, but the M2+ is not booting from SD card. Except I short press the uBoot button followed by the reset button. This means I only get the board booted after a power cycle, if I press the uBoot button before. Then I tried to boot the board from NAND, but it is the same. It only boots from NAND, if I press the uBoot button before. (Installed to NAND before, of course) To verfy that I do not have any hardware issue, I downloaded a original Banana PI M2+ Image from the Banana-pi…

First time poster, hopefully I'll get along with all of you! I am currently trying to connect a DS18(b)20 cable to my Banana Pi M2+, which is running Jessie Desktop. I connected the 3,3 V to Pin 1, GND to Pin 6 and Data to Pin 7, as well as the recommended 4,7k Ohm resistor between them. Since, as I should have mentioned, I am an absolute beginner (literally just got into this a few days ago), I used a German tutorial for this, which told me to enter the following into my command module: After which my /sys/bus folder shows a "w1" folder, which it does. However, the cable itself cannot be found. After some tinkering, I found that w1-therm does not seem…

Hi , I'm an beginner.I have M2+ and want to access GPIO by Python. Please suggest me that how to do that. thank you.

Hello, No bluetooth device in my Armbian... Banana Pi M2+ ARMBIAN 5.65 stable Ubuntu 18.04.1 LTS 4.14.84-sunxi dpkg-query -Wf '${Version}\n' bluez 5.48-0ubuntu3.1 No Bluetooth device(hci0): rfkill list 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no Which refers to the error: systemctl status ap6212-bluetooth.service ● ap6212-bluetooth.service - LSB: Patch firmware for ap6212 adapter Loaded: loaded (/etc/init.d/ap6212-bluetooth; generated) Active: failed (Result: exit-code) since Tue 2019-01-08 09:18:38 UTC; 1min 2s ago Docs: man:systemd-sysv-ge…

Hello, my external USB3.0 HDD is only recognized with USB 1.1. dmesg | grep usb: [ 0.180455] usbcore: registered new interface driver usbfs [ 0.180455] usbcore: registered new interface driver hub [ 0.180455] usbcore: registered new device driver usb [ 2.470043] usb 2-1: new high-speed USB device number 2 using sunxi-ehci [ 2.610042] usb 2-1: device descriptor read/64, error -71 [ 2.694427] usbcore: registered new interface driver usb-storage [ 2.716481] usbcore: registered new interface driver ums-alauda [ 2.728259] usbcore: registered new interface driver ums-cypress [ 2.740098] usbcore: registered new interface driver ums-datafab …

I received today my BPI M2+, however, I cannot make it boot. I tried both Diet Pi and Armbian Server. No boot. The red LED is on all the time. I'm using a Samsung EVO 32 GB SD card flashed with Etcher on Ubuntu. My power supply is a 5v 3A barrel connector. Since the usual suspects are not the cause, I have no idea what might be going wrong.

Hi all, First of all, a big thanks for making Armbian work, the work you guys have done is incredible. I have a BPI M2+ board and I have a problem getting the serial communication to work both ways. I am using the latest image that is available to download on the Armbian website version 5.20, Jessie server, 3.4.112 kernel. According to the board fex file (found here) the configuration for the uart2 is: [uart2] uart_used = 1 uart_port = 2 uart_type = 4 uart_tx = port:PA00<2><1><default><default> uart_rx = port:PA01<2><1><default><default> uart_rts = port:PA02<2><1>&l…

I can get WiFi working on the M2+ but not with encryption, I am using the latest Armbian has anyone had wifi success with this board ?

Hi guys, I installed last armbian on Banana Pi M2+, and execute nand-sata-install.sh to boot armbian from emmc, it works fine. I want system boot from emmc, and storage some data to sd card, so I prepare one sd card with ntfs partition, insert to Banana Pi M2+, and boot. It cannot boot, and message are: U-Boot SPL 2016.05-armbian (Jun 23 2016 - 09:59:04) DRAM: 1024 MiB Trying to boot from MMC1 U-Boot 2016.05-armbian (Jun 23 2016 - 09:59:04 +0200) Allwinner Technology CPU: Allwinner H3 (SUN8I 1680) Model: Xunlong Orange Pi PC DRAM: 1 GiB MMC: SUNXI SD/MMC: 0 (SD), SUNXI SD/MMC: 1 *** Warning - bad CRC, using default environment In: serial Out: serial…

Hi all ! Sinovoip just send me a free sample of a new board, BPi M2 plus. - H3 SoC - eMMC (7.3 Go) -Inboard Wifi+BT ( chipset AP6212 ) Very good, thanks to them ! So I have installed Armbian (here), but the wifi doesn't work yet. I have found the driver source, (http://www.mediafire.com/download/68vvpim3k3po0ur/support_ap6212.rar) but I think I must recompile all Armbian to try if this driver works. Some questions: 1) Can I compile Armbian with a Ubuntu 16.04 x64 desktop, or 14.04 is better ? 2) If so, does a source is available somewhere (and maybe a tutorial? XD ) ? I have look the Igor's repo, but I think sun8i is not available at this day. T…

I am attempting to boot my BPI-M2U. It will start the boot, but it does not get to the login prompt. Instead, it resets and starts the boot process over. I am using a 3A Power Supply rated for Pi's. I've tested with other power supplies. One of the BPI images does boot and run. The SD card is untested but works for the other OS. In case it was the SD card, I flashed the Armbian image to the eMMC and attempted to boot off that. I am using the Armbian_23.05.0-trunk_Bananapim2ultra_bookworm_current_6.1.24 image. While the exact spot it dies might change by a few lines, the following is about where it gets. I can build Armbian images f…

I used armbian-config to set up boot from EMMC. Then I run dd if=/dev/zero of=/dev/mmcblk0 bs=1024 count=2048 And re-partitioned my SD Card. Rebooting with or without SD Card not possible.

I've no problem using my Banana Pi with a wifi connection. But if I plug it on my router with a ethernet cable it crashs after a short time. Should I upload the output of armbianmonitor when ETH is plugged? Because it will take me a few tries, to do that.

Hello Got a new board recently and trying to load the latest image Armbian 5.90. I get crashes with every boot: Starting kernel ... [ 9.306138] Unable to handle kernel paging request at virtual address ffff00007bfa3420 [ 9.314093] Mem abort info: [ 9.316964] ESR = 0x96000005 [ 9.320170] Exception class = DABT (current EL), IL = 32 bits [ 9.326418] SET = 0, FnV = 0 [ 9.329469] EA = 0, S1PTW = 0 [ 9.332606] Data abort info: [ 9.335484] ISV = 0, ISS = 0x00000005 [ 9.339315] CM = 0, WnR = 0 [ 9.342282] swapper pgtable: 4k pages, 48-bit VAs, pgdp = (____ptrval____) [ 9.349161] [f…

Hi, All ARM 64 get support plate. http://www.banana-pi.org/m64.html Spec: M3 Specifications CPU 1.2 Ghz Quad-Core ARM Cortex A53 64-Bit Processor GPU MALI-400 MP2 @ 500MHz Memory 2GB DDR3 SDRAM (shared with GPU) Storage Support MicroSD Card(up to 64GB)/SATA(up to 2TB USB-to-SATA; GL830)/eMMC(8GB onboard) Onboard Network 10/100/1000Mbps ethernet (Realtek RTL8211E/D) WiFi 802.11 b/g/n (AP6212) Bluetooth BT4.0 (AP6212) Video In CSI connector that supports 8-bit YUV422 CMOS sensor CSI, CCIR656 protocol for NTSC and PAL, 5MP camera, 1080p video @30Hz Video Out HDMI 1.4 with resolutions (upto 4K @24Hz) MIPI DSI for RAW LCD panels Audio Out 3.5 mm Jack a…

After installing armumian-5.83 on Banana pi M64 and starting it, kernel error is output and restarted when executed from start or ansible. Spoiler k8s-work4 login: [ 20.668532] WARNING: CPU: 2 PID: 0 at lib/timerqueue.c:79 t0 [ 20.676119] Modules linked in: zstd zram brcmfmac brcmutil snd_soc_hdmi_codex [ 20.715677] CPU: 2 PID: 0 Comm: swapper/2 Tainted: G D 5.1.0-6 [ 20.723854] Hardware name: BananaPi-M64 (DT) [ 20.728121] pstate: 60000085 (nZCv daIf -PAN -UAO) [ 20.732913] pc : timerqueue_del+0x64/0x70 [ 20.736923] lr : __rem…

Hello! Is there any hope to acquire a r3p2 or a newer Mali driver support in an armbian kernel for Banana Pi?

Hello On my Banana PI infrared receiver is not detected at bootup. I'm running armbian 4.7 jessie. The only /dev/input device is that of axp20x-pekj, which I undestand to be a power controller. My issue is similar as found in this thread: http://forum.armbian.com/index.php/topic/475-bananapi-r1-no-infrared-device/ Except ofcourse the board is different From the other thread I gather I need to change something in regards to dtb-s, but I guess as the boards are different using the same one as mentioned is not a good idea.

Hi, First time user here. I'm using the legacy Jessie build with kernel 3.4.109 Kernel. OTG is enabled and generally working. However, with some USB devices we are getting the following message with dmesg: WRN:L2705(drivers/usb/sunxi_usb/hcd/core/sw_hcd_host.c):ERR: sw_hcd_schedule, best_end [ 663.633167] WRN:L2951(drivers/usb/sunxi_usb/hcd/core/sw_hcd_host.c):ERR: sw_hcd_schedule failed [ 663.641968] cannot submit datapipe for urb 0, error -28: not enough bandwidth This only happens with some USB devices. My USB headphones work fine but a USB DAC for music does not. I remember reading somewhere the OTG on the BananaPi seemed limited in terms of actual conne…

hi, since 2 days i am using on my Banana Pi the Debian Jessie with 4.8.15 Kernel with installed Openmediavault 3. The system is working stable, but the network-performance is less then my older Installation based on Debian Wheezy with Openmediavault 2. I tried change the MTU-Size to 9000 and overcklocking up to 1.2 GHz, booth is not possible. I don´t know why ? For the setting the MTU-Size i edited /etc/network/interfaces and added the value "mtu 9000" -> no effects I tried set the MTU over the OMV WebGUI under network settings -> no effects. ifconfig shows me MTU=1500 Booth ways was at Debian Wheezy possible. At Debian Wheezy i had overclock the …

hi, since 2 days i am using on my Banana Pi the Debian Jessie with 4.8.15 Kernel with installed Openmediavault 3. The system is working stable, but the network-performance is less then my older Installation based on Debian Wheezy with Openmediavault 2. I tried change the MTU-Size to 9000 and overcklocking up to 1.2 GHz, booth is not possible. I don´t know why ? For the setting the MTU-Size i edited /etc/network/interfaces and added the value "mtu 9000" -> no effects I tried set the MTU over the OMV WebGUI under network settings -> no effects. ifconfig shows me MTU=1500 Booth ways was at Debian Wheezy possible. At Debian Wheezy i had overclock the …

Hi! On my Banana Pi PRO, i installed this «Armbian_5.00_Bananapi_Debian_jessie_4.4.1» but applications report 'no soundcards found'. I did the apt-get upgrade for 5.01 but still same problem.

Hello, a few months ago I wrote a tutorial to enable the 7" touch display for Banan Pi and Banana Pi Pro. Unfortunately the files (*.dts e.g. sun7i-a20-bananapro.dts) have changed and I don't know how to integrate the patches in the current armbian version. Does anybody know how to do it? Is there already a overlay to enable it? Thanks. Steffen

Hello everyone, Looks like i have some issue after last upgrade. I'm using a Banana Pi Pro as a file server at home (with samba mainly). The system is some kind of freezing after a few hours : i'm watching a movie and cannot go to the end of it. The system disappears from the network : no more access via samba/windows network, no more ssh, no more ping... Fortunately i am logging remotly so i can see that the system is still working somehow because it goes on sending syslogs. Last syslog is (the system "froze" at 20:10) : Feb 7 20:02:01 localhost CRON[3118]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly) Feb 7 20:05:…

Hiya, I'm attempting to use Wifi on the Banana Pi M1Plus board, supposed to be a Banana Pro clone from SinoVoip, but I cannot get the wifi module working with the latest Armbian 4.5, Jessie kernel 3.4.109. I have already linked script.bin to the /boot/bin/bananapro.bin file I try loading the ap6210 module and it gives errors. root@bananapi:~# modprobe ap6210 <3>[ap6210] parse wifi_used failed in script.fex. <3>[ap6210] bluetooth is disable in script.fex. <3>[ap6210] [dhd_module_init] get wl_host_wake gpio failed modprobe: ERROR: could not insert 'ap6210': Operation not permitted Thankyou for any help Lemonzest

I installed Armbian_5.59_Bananapipro_Ubuntu_bionic_next_4.14.65 onto my Banana Pi Pro. However, there is Internet for now. $ip address gives me the following messages: 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN group default qlen 1000 link/ether 02:86:02:42:2f:4e brd ff:ff:ff:ff:ff:ff 3. wlan0: <NO…

Sometimes i can't access to my banana thru ssh and etc. Link led is blinking. It happens everytime in HH:16:00 with random hour. In syslog i get this messages: i don't understand what is this... Everytime syslog messages are same

Dear all I have the problem that when I reboot my banana pi pro it always creates a new eth0 config. Which as default has ip4 disabled hence I cant see it directly. At the moment I always access the pi via ip6 and than delete the config via nmtui. My question: How can I turn the creation of a new eth0 config on reboot off? ARMBIAN 5.60 stable Ubuntu 18.04.1 LTS 4.14.70-sunxi Thanks

used your script to make rootfs on SATA device but it doesn't boot up. I just modified your script: if [[ $KERNEL == *"3.4"* ]]; then sed -e 's,root=\/dev\/mmcblk0p1,root=/dev/'"$DESTPART"',g' -i /boot/boot.cmd mkimage -C none -A arm -T script -d /boot/boot.cmd /boot/boot.scr else sed -e 's,root=\/dev\/mmcblk0p1,root=/dev/'"$DESTPART"',g' -i /boot/uEnv.txt sed -e 's,root=\/dev\/mmcblk0p1,root=/dev/'"$DESTPART"',g' -i /boot/boot.cmd if [ -f /boot/boot.cmd ]; then mkimage -C none -A arm -T script -d /boot/boot.cmd /boot/boot.scr fi fi …

I use 4.14 image from https://www.armbian.com/banana-pi-pro/ I try to enable vdpau and switch from next to legacy kernel on Armbian Bionic (linux-image-sun7i). And got an hangup at "Starting kernel..." message. Set verbosity "9" and mkimage doesn't help. Why no bionic desktop images for banana pi pro? Did you drop support for legacy kernel on bionic for old bananas? For xenial, bananapipro.bin exists in package linux-xenial-root-bananapi. wget https://apt.armbian.com/dists/xenial/main/Contents-armhf.gz -O-|zcat|grep bananapipro.bin But this file not found for bionic: wget https://apt.armbian.com/dists/bionic/main/Contents-armhf.gz -O-|zcat|grep bananapipr…

Hello, I have two Banana Pi Pro boards with current Armbian 20.02.1_Bananapipro_buster_current_5.4.20_minimal, kernel 5.4.20-sunxi and both have small SSD connected (WD 120GB and Goodram 120GB). fdisk -l doesn't show any drive's except sdcard (and ram drives). Is there any way I can get it working?

Validated yesterday on three different installs. Wifi is not working. Used Distro: Armbian Xenial desktop legacy kernel 3.4.y chrissie@bananapipro:~$ uname -a Linux bananapipro 3.4.113-sun7i #16 SMP PREEMPT Wed Jan 24 19:20:59 CET 2018 armv7l armv7l armv7l GNU/Linux [ 130.524044] [ap6211] dhd_bus_devreset: WLAN ON [ 130.535651] [ap6211] Final fw_path=/lib/firmware/ap6210/fw_bcm40181a2.bin [ 130.541328] [ap6211] Final nv_path=/lib/firmware/ap6210/nvram_ap6210.txt [ 130.548074] [ap6211] download firmware /lib/firmware/ap6210/fw_bcm40181a2.bin [ 130.802082] [ap6211] bcmsdh_set_irq Flag = 1 [ 130.805963] [ap6211] dh…