Allwinner sunxi

Hi, Many thanks for your support. I installed successfully the OpenMediaVault (OMV) ISO Image on the new Orange Pi Zero Plus (OPI0+): OMV_3_0_91_Orangepizeroplus_4.13.13.img.xz. I mounted an external USB 2.0 HDD. via OMV The OPI0+ is directly connected thru LAN cable to the router (Fritz!Box 7490). Login via PuTTY ssh works also fine. Additionally, I installed miniDLNA and configured folder/file sharing and media streaming. The flac-files are provided quickly, including album cover pictures (jpg). Now, I kindly ask for your support to disable Wi-Fi (WLAN). I thought about blacklisting the module 'cfg80211', but …

I'm trying to use a few of the GPIO pins as output pins on an Orange Pi PC+ running Armbian 5.26 and legacy kernel 3.4.113-sun8i. When I look at the FEX file, it appears that the GPIO pins have all been disable d by default: [gpio_para] gpio_used = 0 gpio_num = 0 I don't recall them being disabled by default in previous versions of Armbian. I s this a recent change? Anyway, I edited the file and changed it to: [gpio_para] gpio_used = 1 gpio_num = 3 gpio_pin_1 = port:PA13<1><default><default><default> gpio_pin_2 = port:PA14<1><default><default><defau…

Hi, I have today on ma Orange Pi Zero switch kernel from dev 4.11.12 to NEXT kernel 4.13.4 and notice that defined modules in /etc/modules file are not loaded during start system I must manually load and in log system: 0.002070] CPU: Testing write buffer coherency: ok [ 0.002628] /cpus/cpu@0 missing clock-frequency property [ 0.002662] /cpus/cpu@1 missing clock-frequency property [ 0.002692] /cpus/cpu@2 missing clock-frequency property [ 0.002725] /cpus/cpu@3 missing clock-frequency property and armbianmonitor don't show CPU frequency but on kernel 4.11.12 was OK I know that NEXT kern…

Hi all, I'm new here and somewhat new to "modern Linux"..I'm more a BSD Guy... I'm using, administering and programming on unices since approx 1992, using FreeBSD (mostly) at home, my wife has a Laptop using Mint installed by me, but I haven't put much effort into my Linux experiences since systemd came up... Ok, approx 2 years before I've got a bunch of more or less unusual embedded HW..Beaglebone, Olinuxino with an A10, some Intel based thingy and something from AnalogDevices if I remember correctly. All of them are more or less old. Now I want to build a kind of a home automation appliance that is reading out data f…

I've built https://github.com/auto3000/RPi.GPIO_NP for the Duo running Armbian Ubuntu test image: cd /sys/class/gpio for i in gpiochip* ; do echo `cat $i/label`: `cat $i/base` ; done 1c20800.pinctrl: 0 1f02c00.pinctrl: 352 Has anyone actually got RPi.GPIO working on Duo? I'm trying to get luma.oled cranking and have SPI working fine, but need GPIO working as well.

I have an ADC and DAC board built for Raspberry Pi which has 2 slaves on the SPI bus, requiring ce0 and ce1. This works fine on the Raspberry pi 3, which installs devices /dev/spidev0.0 and also /dev/spidev/0.1, to access each slave. On the OPi PC I can access slave 0, but not slave 1. In /dev on the Opi there is only a single spidev device: /dev/spidev0.0 and no spidev0.1 device. I have modified the script.bin (I am using Armbian legacy OS - Armbian_5.14_Orangepipc_Debian_jessie_3.4.112_desktop) by editing the .fex (and making a new script.bin) to add a spi_cs1 = port:PC07<3><default><default><default> line. But adding this prevents any spide…

Hello all, just joined the forum since this is my first time using Armbian. So I got a NanoPi M1 and the dvp cam500b. From what I understand this camera uses the omnivision ov5640. I am having trouble getting this thing recognized in armbian. I get /dev/video0 to be listed by adding it to /etc/modules, but if I go to access it with any software it reports back 'no such device' or to the similar effect (this includes mjpg-streamer, fswebcam, ffmpeg). Researching around I find many forum posts of people saying one must modify the 'fex' file... to which I found out this is the decompiled version of the /boot/script.bin file using the sunxi-tools/bin2fex. Thing is, wh…

Hi all.. I can't solve one issue with nanopiair h3. I was tried to set the speed of ttyS1 using stty -F /dev/ttyS1 230400 min 0 time 5 -isig -icanon -iexten -echo -echoe -echok -echoctl -echoke -opost -onlcr that works no err messages..but my data at port is like garbage... I see this err under dmesg 21 03:10:02 2017] sw_uart_check_baudset()429 - uart1, select set 1, baud 230400, uartclk 24000000 beyond rance[30000000, 120000000] on the other hand when I check the status of uart root@FriendlyARM:/boot# cat /sys/class/tty/ttyS1/device/status uartclk = 24000000 The Uart controller register[base: 0xf1c28400]: [RTX] 0x00 = 0x00000000,…

I just did an apt-get update on the mainline version of armbian and now the machine won't boot. I'l looking at the uboot output and it appears not to load the full kernel in and boot it. The strange thing is it seems to hang, but when I unplug the power, the kernel load info shows up on the serial output. U-Boot SPL 2017.03-armbian (Mar 15 2017 - 06:57) DRAM: 512 MiB Trying to boot from MMC1 U-Boot 2017.03-armbian (Mar 15 2017 - 06:571 +0100) Allwinner Technology CPU: Allwier H3 (SUN8I 1680) Model: Xunlong Orange Pi Zero DRAM: 512 MiB MMC: SUNXI SD/MMC0 *** Warning - bad CRC, usig default environment r serialial Net: phy interface0 eth0: ethernet@1…

Hello, I currently installed Opi0 plus2 h3_Debian_stretch_next_4.14.78 but when I boot up my device, red led blinks 2times then pause and repeating again. What does it mean? I have never seen this blinking red led behaviour in previous Armbian releases.

I understand I'm working with an experimental build...just breaking stuff to learn... Is Xwindows a complete no-go on the current Xenial build? What have you done to get X to load? I installed using the following commands: sudo apt-get update sudo apt-get upgrade {at this point I had to do some finagling to get wlan0 to work again...thanks again @martinayotte!} sudo aptitude install xserver-xorg-core sudo aptitude install xserver-xorg sudo aptitude install xorg openbox sudo aptitude install ubuntu-desktop After the install, I ran "startx" and it bombed. xinit: giving up xinit: unable to connect to X server: Connection refused xin…

Hello , I have setup a banana pi with armbian: Linux bananapi 4.3.3-sunxi #3 SMP Mon Dec 28 11:27:16 CET 2015 armv7l GNU/Linux I wuld like to setup a wifi access point from a rtl wifi dongle. Realtek Semiconductor Corp. RTL8192CU 802.11n WLAN Adapter First, I have tried with bananian and it was working perfectly. But I have also a tv adapter not working with bananian, kernel 3.4 seems not support it. With armbian vanilla, the tv adapter is supported but it seems to have an issue with the wifi dongle driver. When I start hostapd-rt, I have the following errors: drv->ifindex=5 l2_sock_recv==l2_sock_xmit=0x0x766b0 ioctl[SIOCSIWMODE]: Invalid argument Co…

I have an Orange Pi One Plus with the H6 chip in it and I'm quite happy with how well it's supported by Armbian. I haven't really had any problems with it. I do have one question, though. I'm using armbianmonitor to "-m" monitor the machine and I notice that the temps are always pretty hot. Even at idle (480MHz) it still shows 72C. That seems higher than I would have expected. Is this normal, expected behavior? I understand that the SoC thermal monitoring code in the kernel is pretty new and therefore might not be perfect, yet. So, I thought I'd ask. Because it may just be my board that's off. Does anyone know if this is normal? Info: …

Hi there. I want to use a push button on a GPIO to shutdown O Pi Zero safely. Though the acpid way runs fine on an O Pi One, I wonder if there is a way to make it work on a O Pi Zero. Please direct me if its documented somewhere already. Thanks

Hi. I am new to the MiniPC world and thank you for your help beforehand. I have managed to install ARMBian on my Orange Pi PC + and it occurred to me to use it as a STEAM Link with MOONLIGHT software that gives such good results in its version for Android. The linux version runs from an independent one here. The problem is that it does not let me install the dependencies, I leave them an image. I have tried it from XTerminal as from 'Synaptic Package Mannager' As I say I am new to this, if someone who knows how to operate explained it I would be very grateful. Thank you very much. //------------------------------------------\\ Spoile…

Hello guys, I configured bridge via nmcli/nmtui br0. Slave devices of bridge are eth0 and wlan0(as wifi access point). OS: Armbian_5.59_Orangepizero_Ubuntu_xenial_default_3.4.113 root@orion2:~# nmcli c s NAME UUID TYPE DEVICE bridge-br0 fff57bce-6051-458d-9394-7101741af59f bridge br0 bridge-slave-eth0 25720542-2bdd-498e-992e-4415385673d5 802-3-ethernet eth0 bridge-slave-wlan0 ed8b07bf-a793-4717-8c99-2e84d54af672 802-11-wireless wlan0 Configuration looks fine, but when I try login to AP, my smart phone shows error message: "Authentication issue" , an…

Hi! I'm using a mosfet to control a fan based on temperature on my opipc, but now it just turns on and off. I'd like to control the rpm with pwm, but I cannot use any of the pins with wiringop :S I read on an other forum that the h3 has only one pwm, but which one is the pwm pin, and how could I use it? Thanks in advance!

Hello, I'm a newbie an Linux and bananaPI. Actually, i uses an debian wheezy image of Igor's (Bananapi_Debian_2.8_wheezy_3.4.107) with openmediavault and one sata drive. I would like add an sata multiplier on my BananaPI. I find this tuto : http://www.htpcguides.com/rebuild-bananian-kernel-with-sata-port-multiplier-support/ I don't know if this procedure works an the debian image of Igor's ? please confirme me I think the line " git clone https://github.com/Bananian/linux-bananapi.git--depth 1 " isn't good ?

I have an early model of the 14" pinebook with the 1366x768 panel, apparently this model has invalid EDID which prevents the display working. During booting the log is full of errors like this and also a [ 10.808400] [drm:anx_aux_transfer [analogix_dp_i2c]] *ERROR* Failed to wait for AUX channel (status: 02) [ 10.816392] [drm:anx_aux_transfer [analogix_dp_i2c]] *ERROR* Failed to wait for AUX channel (status: 02) [ 10.816409] [drm:anx6345_bridge_enable [analogix_anx6345]] *ERROR* Failed to power up DisplayPort link: -110 [ 10.816415] [drm:anx6345_bridge_enable [analogix_anx6345]] *ERROR* Failed transmitter initialization: -110 [ 10.816420] [drm:an…

Hi, I am new with OrangePi plus 2E which I bought after I have great fun with several Raspberrys. In first moment I was very disappointed with software and documentation, than I found Armbian. Well, on all of my boards and computers I run Ubuntu, so I choose Armbian Ubuntu desktop edition. With legacy kernel everything runs good, but I prefer mainline kernel, and there I run into the problem. I have no video output on HDMI. I tried nightly build of Armbian and updated legacy desktop edition. Same result, no video over HDMI. Googling about this gives me lot of confusing results so I decide to ask here. Is video over HDMI on OrangePi …

Hi all! I sadly found that I can't watch my videos. Everything's fine with youtube, nevertheless. But video I tested (h264 + avc1, m4v and avi containers) looks like fast slideshow, and sound is VERY ugly! I've tried to install mali-midgard-dkms, I've failed (see below). What should I do to watch the videos? Convert 'em all to some chosen codec? Add to sources.list kind of "unstable" thing and upgrade? Install another armbian image? Find proper mali drivers and compile it carefully? Please, help! armbianmonitor -u http://ix.io/2mXg __@opi3 ~ # apt-get install mali-midgard-dkms …

How to start a sound&microphone on the Orange Pi Zero 2+ H3? root@orangepizeroplus2:/# aplay -l aplay: device_list:268: no soundcards found... root@orangepizeroplus2:~# uname -a Linux orangepizeroplus2 4.11.5-sun8i #3 SMP Thu Aug 3 08:36:37 CEST 2017 armv7l armv7l armv7l GNU/Linux root@orangepizeroplus2:~# lsmod Module Size Used by can_raw 16384 1 bluetooth 270336 0 qmi_wwan 24576 0 qcserial 16384 2 usb_wwan 16384 1 qcserial sun8i_codec_analog 24576 0 snd_soc_core 122880 1 sun8i_codec_analog snd_pcm_dmaengine 16384 1 snd_soc_core usbserial …

Hello, I'm a complete beginner with Armbian and SOC board. I've a bananapi pro board from lemaker and I've installed 6 month ago Raspbian / Jessie and domoticz and all works well until a click unfortunately on update icons of domoticz...and the problems began...no back up...new version of domoticz required buster...image buster not avalaible under raspbian for bananapro.... So I decided to install Armbian/buster_minimal I've serial link on which I can see that board boot correctly. I've installed Armbian-config and the "Default install desktop with browser and extra". I want the board to show information on HDMI…

Board: Orange pi zero. wifi xr819 driver how to install and start it, step by step. please help

Hi, With an Orange Pi Zero Plus I‘d like to run a DLNA (UPnP) music server for streaming flac files - means music only - to certain clients via LAN, for instance a network AV receiver. Therefore, 100 MBit/s should be sufficient. How to limit the OPi0+ network speed to 100 MBit? And to switch off Wifi also? ... ... for minimizing power consumption. Presupposed Armbian + OMV (+ miniDLNA plugin) installed. Thanks, Joe

I have a little problem: my fstab: root@osirisBpiM3:~ # cat /etc/fstab /dev/mmcblk0p2 / ext4 defaults,noatime,nodiratime,commit=600,errors=remount-ro 0 1 tmpfs /tmp tmpfs defaults,rw,nosuid 0 0 /var/swap none swap sw 0 0 //192.168.0.11/media /mnt/openelec/media cifs iocharset=utf8,credentials=/root/.smbcredentials,uid=1000 0 0 //192.168.0.11/media2 /mnt/openelec/media2 cifs iocharset=utf8,credentials=/root/.smbcredentials,uid=1000 0 0 //192.168.0.11/big850gig /mnt/openelec/big850gig cifs iocharset=utf8,credentials=/root/.smbcredentials,uid=1000 0 0 //192.168.0.2/C$ /mnt/sophie/c cifs iocharset=utf8,credentials=/root/.smbcredentialssophie,uid=1000 0 0 //192.168.0…

Hi, I was using my M2 Plus yesterday getting the 3rd USB to work, everything went well with that got it working, and if I remember correctly I also ran the Update & Upgrade through the armbian-config utility before shutting everything down, today when I got back from class with a custom PCB adapter for the 3rd USB, I connect it with the USB device, I connect the power to the board and wait for the VirtualHere server to start up and show up at my computer, when I noticed it wasn't showing up I did a ip scan and couldn't see the ip, connected a screen to the HDMI and got this on the boot up, it just cycles through the same screen. When I installed the image about …

I enabled modules, and connected DS18B20 but still haven't 28-XXX... folder in /sys/bus/w1/devices. In README.sun8i-h3-overlays written that default port is PD14 but i can't find it on my board pinout.

I am just getting started using the Orange Pi Zero and installed Xenial 4.10.1. Currently I am using Python and am able to address the GPIO pins (using this project: https://github.com/duxingkei33/orangepi_PC_gpio_pyH3) However, I need to communicate with a serial device (projector) using RS232 on 9600 BAUD. For this, the built-in UART should do the trick (with an additional voltage converter). Does anyone know how I can address this device from Python? Alternatively, is there a way to clock" an GPIO output to 9600 BAUD and manually send the data? Thanks, Ezpl

I have read through the forum that Banana Pi Pro does not support directly powering drive over USB as it might be too much for this board. In my setup I use 2 A power adapter for my Banana Pi and an active HUB with power supply of 1 A, but with limit of 500 mA for HDD. Still, when connecting HUB to Banana Pi and HDD to HUB the same issue appears as when no HUB is used - the red diode turns off and Banana Pi looses power. I have already tried several HDDs (500 GB, 320 GB, 2 TB) - all with the same result. Anyone has some idea why this might be occuring despite powering drives from external source? Does Armbian have any software limitations that are creating this issue? …

hi there, i'm quite new on arm, so apologize for my stupid questions. i'm trying to compile example in wiringOP lib. but i got error: zero@orangepizero:~/WiringOP/examples$ gcc -o blink blink.c -lwiringPi //usr/local/lib/libwiringPi.so: undefined reference to `pthread_join' //usr/local/lib/libwiringPi.so: undefined reference to `pthread_create' //usr/local/lib/libwiringPi.so: undefined reference to `pthread_cancel' collect2: error: ld returned 1 exit status i'm running Xenial legacy on orange Zero. can someone help me please?

Hi, I met another weird issue: I tried to setup a static IP address for my NanoPi NEO, which should actually bundle the NanoPI NEO's GigE MAC address and the static IP. Whenever I reboot the NanoPI NEO, its GigE MAC address changes, and an random IP address is automatically allocated, via DHCP. I mean, the previous MAC address did bundle to the static IP address that I allocated. However, there always exists a 2nd HOST name NanoPINEO which has a NEW MAC address and is allocated to a NEW IP address automatically. I'm not sure if this is an issue of the latest kernel I've just built? Or it is an issue of the FriendlyARM BSP for AllWinner H3 ? I posted …

Hi, my installed version is about a year old at least...so I'd like to upgrade without loosing settings and data. Is this possible? If yes, how? In doc. there is only decribte how to update the kernel, nothing else... Thanks, Astro System says: root@cubie:~# cat /etc/issue Debian GNU/Linux CT Debian 2.7 wheezy root@cubie:~# cat /proc/version Linux version 3.4.104-sunxi (root@cubie) (gcc version 4.8.2 (Ubuntu/Linaro 4.8.2-16ubuntu4) ) #1 SMP PREEMPT Fri Sep 26 18:30:39 CEST 2014

Hello Guys, I have a problem with time in my Orange Pi Plus 2E. I have installed yesterday Linux orangepiplus2e 4.19.62-sunxi #5.92 SMP Wed Jul 31 22:07:23 CEST 2019 armv7l GNU/Linux and and I can't set right time. root@orangepiplus2e:~# hwclock 2019-10-07 16:52:25.994362+02:00 root@orangepiplus2e:~# date Mon Oct 7 16:56:46 CEST 2019 Now is 16:40 hour. Yesterday different was about 20 minutes, today is about 4 minutes. How to align the time? root@orangepiplus2e:~# hwclock --test -D hwclock: use --verbose, --debug has been deprecated. hwclock from util-linux 2.33.1 System Time: 1570460247.618048 Trying to open: /dev/rtc0 Using the rtc interfac…

Hello, I am using Armbian nightly legacy Jessie 3.4.113 build and it seems Mali drivers are included. Please, How should I set values in boot.cmd and boot.scr to mali HW acceleration work properly? I checked this site http://linux-sunxi.org/KernelArgumentsand tried to place something like "sunxi_ve_mem_reserve=64 cma=96 sunxi_g2d_mem_reserve=64 sunxi_fb_mem_reserve=32" to this file on setenv line but armbian fails to boot. I would like to use HW acceleration in VLC. Thank you.

Good day. My trouble - is not started spi, on orange pi pc, with ARMBIAN 5.25 stable Ubuntu 16.04.2 LTS 4.10.0-sun8i I read documentation for DTB overlays on official site https://docs.armbian.com/Hardware_Allwinner_overlays/ Check armbianEnv.txt, edit DTB (dts) sun8i-h3-orangepi-pc.dts And change status from "disabled" to "okay spi@01c68000 { ...... status = "okay"; ....... This is my /boot/armbianEnv.txt verbosity=1 console=serial overlay_prefix=sun8i-h3 overlays=w1-gpio spi-spidev param_spidev_spi_bus=0 But SPI not started This is boot log h…

I had build armbian 3 days ago, kernel ="5.8.13", with NanopiNEO, I want use a TFT screen, type is ILI9341, when I use "armbian-config" open spi_spidev, no /dev/spi* created, and screen does not work. here is config: # # cat /etc/modprobe.d/fbtft.conf options fbtft options fb_ili9341 name=fb_ili9341 gpios=rest:0,cs:67,dc:2,led:3 speed=48000000 fps=26 rotate=90 bgr=1 txbuflen=65536 debug=3 here is armbian-hardware-monitor.log Other: ttyS0 can't login, Does somebody can help me, thinks very much! armbian-hardware-monitor.log

I am having troubles with getting audio from the sunxi audiocodec on my NanoPi NEO. I enabled audio in the .fex file and the configuration is as follows: [audio0] audio_used = 1 lineout_vol = 31 cap_vol = 5 audio_hp_ldo = "none" adcagc_used = 0 adcdrc_used = 0 dacdrc_used = 0 adchpf_used = 0 dachpf_used = 0 audio_pa_ctrl = port:PA16<1><default><default><0> When I ssh into the machine the codec does come up root@nanopineo:~# aplay -l **** List of PLAYBACK Hardware Devices **** card 0: audiocodec [audiocodec], device 0: SUNXI-CODEC sndcodec-0 [] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: sndhdmi [sndhdmi], device 0: SUNXI-HDMIAUD…

Hello! How to turn off Wi-Fi and Bluetooth devices to reduce power consumption? armbianmonitor -U -> result in attachment. Thank you. armbian-hardware-monitor.log

Hi, I'm new user. I want to install owncloud in my orange pi+2. Someone can help?

Hi there, I noticed there are up to date builds for Pine64 for Debian and also up to date ones for Ubuntu for the Orange Pi Win. But none for Debian and Orange Pi Win, newest ones are from November probably with legacy kernel? Is this just some kind of build script hiccup? If not, do you have an idea about a timeframe for new Debian builds? (I'd rather not use Ubuntu if it's just a few days/weeks I'd have to wait for Debian.)

I installed Armbian 4.5 Debian Jessie 3.4.109 and added XFCE desktop, but there is no audio on 3.5 jack (I cannot test HDMI audio output). I built my own Debian Jessie 3.4.109 selecting Banana Pro and including XFCE desktop without any other change, and also in this case there is no audio on 3.5 jack. Some useful information to solve the problem. These are equals on both installation. root@bananapipro:~# cat /proc/asound/cards 0 [sunxicodec ]: sunxi-CODEC - sunxi-CODEC sunxi-CODEC Audio Codec root@bananapipro:~# cat /proc/asound/devices 2: [ 0- 0]: digital audio playback 3: [ 0- 0]: digital audio capture 4: [ 0] : control 33: …

Hi! I recently upgraded the OS of my OpiZeroLTS, from the Debian Stretch Server 5.3.5 (available distro on Sunxi website) to Debian Buster 5.8.5 (downloaded from armbian webpage). Everything went well, except when I plug my USB webcam several video devices are assigned. I made a script with fswebcam to acquire still pictures from all /dev/video* and these "ghost" cameras are causing errors when the software try to open them as regular webcams. My script: for vid in /dev/video*; do output=$(basename $vid) fswebcam -d $vid -r 1920x1080 -D 10 -S 5 -F 1 --jpeg -1 --no-banner --no-timestamp --no-info /opt/images/$output mv /opt/i…

Hello there, I belong to the group of users that bought a BPi-M2 to just find out that hardware is nothing without software support. First, to my background: I do spend a lot of time at my computer using both Windows and Linux, but I am not a Linux guru. I used to configure and build kernels several years ago, at the time, when we used LILO to boot Linux. My field of interest is real-time sound processing, based on complex filter banks (ideally implemented using multi-threading). For a current project I needed something small, powerful and easily programmable. Since the BPi-M2 has 4 cores and built-in microphone, it seemed ideal for the first tries. Anyway, I…

I have recently been trying to get my spi ili9341 working under kernel 6.6, having gotten it working previously. I checked to ensure there were no changes in the overlay required by the newer kernel. I confirmed that the pins were configured correctly and that the ILI9341 DRM module had loaded.. Despite this I was met with a white screen. Think I must have missed something I swapped out my SD card for another using an image based on kernel 5.15.88, where I was able to recieve a display. Looking back over the dmesg log, I noticed a slight difference in behaviour with the older kernel. firstly we can clearly see that the SPI driver is requesting to use gpio 34 as…

I've been trying to bring up Armbian on my Banana Pi M2 Ultra (with A40i SoC). First I tried using the community rolling release, and then building it myself from source code. In every case, it was failing to boot; on the HDMI console it was hanging at the stage where the initrd was attempting to scan for the root partition. ("Scanning for btrfs filesystems") Taking a closer look at the verbose output of the UART console during a boot attempt, I saw that there was an error message about the sunxi-mmc device driver experiencing a failure while it was enumerating the EMMC chip: [ 4.136553] mmcblk2: mmc2:0001 8GTF4R 7.28 GiB [ 4.144362] sunxi…

Hi, I have a problem with an OrangePi that I have set up to host Octoprint for my 3d printer. It connects to the wifi just fine(receives wifi IP and I can ping e.g. google.com), but this is all checked through a serial interface, because I can not connect via my network(through SSH) and I can not see the webserver that Octoprint should host. I can't even ping the OrangePi from my computer. What solves the problem for me is to ping my computer from the OrangePi(via serial console). First then I can connect via SSH and see the web page or ping the OrangePi from my computer. If I plug in ethernet to the OrangePi, there is no problem. I have searched …

board: http://nanopi.io/nanopi-neo-core.html image: Armbian Bionic mainline based kernel 4.19.38 from https://www.armbian.com/nanopi-neo/ There are two SPI separated buses with separated pins on NanoPi Core: SPI0 and SPI1 /boot/armbianEnv.txt: ... overlay-prefix=sun8i-h3 overlays=analog-codec i2c0 spi-spidev uart1 usbhost3 param_spidev_spi_bus=0 ... /dev/spidev0.0 presents How to activate a SPI1?

Hi, I have a question regarding the new Banana Pi (A20) boot script created in Armbian 5.25. Many months ago I switched my roots from the SDCard to the sata disk using the sata-nand-install script, after that I used to switch between SD and HDD and vice versa, mostly for maintenance operations on the HDD (sometime the system gets corrupted and I have to restore the HDD partition with e2fsck from the SD). Until Armbian 5.20 I used to edit the boot.cmd file pointing to the desired root device, recompile the boot.scr and then the system were loaded from the desired partition. Now with Armbian 5.25 I'm not sure which file I have to edit to …

Hello everybody. AFAIK Banana PI M1+ share the same costumed Armbian OS with Banana Pro. The Armbian can run pretty well without any changes on my Banana Pro. The problem is, with the same OS image, the on-board WiFi is not working and i can't remember what im doing (what i remember is I do something inside /boot directory), then the WiFi is detected and working properly on my Banana Pi M1+. My simple question is What is the right way to configure Armbian for Banana Pi M1+ after installation? I assume all the default configuration is for Banana Pro and we need some tweak for Banana Pi M1+ especially to enable on-board WiFi and to use GPIO properly.

I have a small sdcard on an orange pi zero and I would like just to keep it for booting, installing package and doing all work on key usb (16 Go) english is not my mother language and what I have read up to now is very difficult to understand i would like somenthing step by step like the diespi installation tutorial, well I forget to say I have dietpi on my 2Go sd card works fine wifi too. Regards HG

Hi everybody, I need some help because I can't make my OPIPlus2e working the way I want. If I understood well I have to install latest armbian, and copy/past script.bin, but sometimes ethernet is not recognized. I tried every distros on my orangepi2e, but I can't install things like kodi (refuses to start, missing libs), or making work hfs drive (can't mount hfs although hfsprogs well installed). I ended up installing openelec and it works great, but I would like to do a NAS with it. Is it still in active development or there is working ISO ? Thank you very much. Best regards, Poukin

Hello Forum, please excuse my bad English. I try setting up a stratum1-server. Based on GPS. For this I use the Banana Pi with kernel 4.6.2 and the Adafruit GPS. The GPS is connected to GPIO J12 and works. RX/TX is not the problem. The problem is the right pin for the PPS-signal. dmesg|grep pps* [ 0.001207] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) [ 0.067281] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 4 [ 3.260009] pps_core: LinuxPPS API ver. 1 registered [ 3.260018] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>…

Hi, Is there any instruction available for upgrading a orange pi+ 2e from stretch to buster? I have found Jessie to stretch instructions. Can I use them? Change .list files stretch to buster? Do I need to uninstall any packages? What packages in that case? Thanks

Hi, i am trying to get the Respeaker 2 Mic Pi hat working on a Banana Pi Zero M2. The HAT uses the WM8960 codec and generates its own I2S MCLK. After some trouble i got the i2c interface working and i2cdetect shows a device at address 0x1a which is correct. But i can not get the I2S interface working. I have added a user overlay with the following .dts: /dts-v1/; /plugin/; / { compatible = "allwinner,sun8i-h3"; fragment@0 { target = <&i2c0>; __overlay__ { #address-cells = <0>; #size-cells = <0>; s…

I'am running the latest Stretch server version on a PiOne (Linux 4.14.65-sunxi). I think that something is going wrong with the logrotate. The rotation is done in /var/log.hdd directory (see also the scripts in /etc/logrotate.d/). But the original file of each is in /var/log directory and is not "cleared" after the rename, because it is not renamed. So, if Zram copies /var/log directory to the /var/log.hdd directory, the original file in /var/log with old logging and included new logging is written to the /var/log.hdd directory. In the next logrotate this growing file is compressed. In this situation/in my case the compressed files contains all the loggings and no…

recently I installed the Ubuntu Desktop on Orange Pi Zero 2+ H3 the Orange Pi Zero 2+ H3 device has only one micro USB OTG port during the first Armbian installation this port should be in dual mode -> power of course and in my opinion the second mode should be a HID gadget (g_hid) in this case we will be able to plug the keyboard via some micro USB hub and setup the system unfortunately this doesn't work like this and right now the installation process isn't so ease now the questions begins -> is it possible? Any clue how to do this? Thx PS I was able to do the installation because I have Orange Pi Zero E…

Hi, first post here, so a bit of context: I have owned my Orange Pi PC for a while and have it set up running the latest Armbian with legacy kernel, serving files over AFP and SMB on the local network and running a Transmission daemon. I set it up with the desktop image but followed the instructions in the documentation to remove the desktop environment etc. I believe that this has left the VDPAU and Cedrus related files intact. As I am using it as a media server I thought it would be interesting to leverage the H3's capabilities of encoding H.264 to convert old DivX files into a more modern format, but none of the solutions I have found for this work correctly. It seems…

Dear all, we need some help from Banana Pi M2 (not that important), Cubox-i/UDOO and ODROID XU4 users. Please look through this Github issue and also have look how we currently handle IRQ redistribution on various board families (example 1 and example 2) Since irqbalanced on ARM is broken (and if it would work it's often counterproductive) assigning IRQs statically to specific CPU cores increases overall system performance slightly for free. We do this for A20 boards for years (dual core --> sending Ethernet to second CPU core), extended this on H3 boards a few months ago (quad core and somewhat complicated due to the count of different boards exposing diff…

Hi! Periodically, time in two-three days, sharply increases CPU utilization, the system becomes disfunctional. SD card and power supply maybe not the best, but they working fine in other systems and I'm tried others. SSH hangs on login while this problem is actual, but i have a serial connection, so can investigate in real time. Please, advise, what to look when this situation came again? top - 03:02:15 up 24855 days, 3:14, 1 user, load average: 1.75, 1.77, 1.93 Tasks: 125 total, 3 running, 70 sleeping, 0 stopped, 8 zombie %Cpu(s): 17.4 us, 26.6 sy, 0.0 ni, 56.1 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st KiB Mem : 505152 total, 9724 free,…

I got the mali stuff working on my H3 on my orange pi one to great success for use with the HTC Vive, but I'm trying to get it working on my H5 on my Orange Pi Zero Plus 2. I can't seem to get any work done as far as installing the mali modules/etc since I can't find the mali node in any of the dtb's. Also, because I am trying to use the normal armbian system, instead of installing my own sunxi-next kernel. I've switched to nightly, but can't figure out how to edit my own changes to the dts's that are built to add add the extra mali node (not that I have any idea where the mali450 is on the H5!). Any help would be greatly appreciated. …

Hi, I am trying to pair a Bluetooth speaker with my Banana Pi M2+ (in command line because I can not connect it to a display and/or keyboard. I use it as a remote machine I connect through SSH). It is the first time I do this in command line then I need help to accomplish it successfully. Here is my situation : 1) I saw that the only two available command line for Bluetooth on Armbian are bluetoothctl and bluetoothd 2) I saw in the file /etc/default/bluetooth that the bluetooth will automatically start at boot through the variable "BLUETOOTH_ENABLED=1" 3) I controlled the Bluetooth is well started by using the command line "syst…

Hello, I just installed Vanilla jessie desktop on SD for cubietruck, it boots well to the desktop but I cannot use usb mouse neither the usb keyboard. WHen it boots it says starting USB... USB0: USB EHCI 1.00 ... scanning bus 0 for devices... 1 USB Device(s) found scanning bus 2 for devices... 1 USB Device(s) found then boots normally to desktop. Is there a pacakge to install? Thanks.

Hi Folks, I installed armbian Jessie with Desktop and Kernel 4.6.3 on my Banana Pi. I'm glad to see, that most of modules I need are installed and working properly. Good job, thanks! But there is one little problem I've got with the kernel. I need pwm (Pin PB2) to control the backlight of my LCD. With Bananian I used sunxi-pwm modul. Worked fine, but isn't installed in the kernel 4.6.3. I know there are ways to build it into the kernel. But befor I'll build an own kernel, I'm hoping of an other way to make pwm for backlight working again. I saw an pwm folder at /sys/class/pwm and also pwm-sun4i modul can be loaded. Unfortunately /sys/class/pwm is empty and stays empt…

Hi I own since a while an Orange Pi One Plus board that I have been unable to use till now (OS images supplied by manufacturer are just a joke !). I wanted to give it a test with ARMBian as you offer now some Beta images. As both Bionic and Stretcher are offered, is there one of them more stable or more near something finished ? Did someone have tried the board with one of these ? and did it work ? Thanks Vincèn

I see the device tree file here: ``` /boot/dtb/allwinner/overlay/sun50i-h616-uart5-ph.dtbo ``` But after adding `overlays=uart5-ph` to `armbianEnv.txt` and rebooting, I'm not getting any new serial device created. Any idea what I need to do?

Hardware: Board: Orange Pi Zero 2W (Allwinner H618) Audio Module: MAX98357A (I2S) Connections: BCLK → PI13 (Pin 7) LRC/WS → PI14 (Pin 16) DIN → PI15 (Pin 31) 5V/GND → Properly connected Software: Armbian Version: 25.5.0-trunk.147 (nightly) Kernel: 6.6.75-current-sunxi64 Configuration: /boot/armbianEnv.txt: overlay_prefix=sun50i-h618 overlays=i2s param_i2s=on Problem: No sound output via MAX98357A. aplay -l returns "no soundcards found". dmesg | grep i2s shows no output, indicating the I2S driver is not loaded. Missing I2S overlay: Checke…

hi, I've got a orange pi zero 2 plus h3 and wifi doesn't exced 0.150MBytes/s = 0.150 Mo/s. i try to use an expension board and a usb=> ethernet (https://www.banggood.com/fr/Orange-Pi-Zero-Expansion-Board-Interface-Board-Development-Board-p-1115982.html?rmmds=myorder and https://www.banggood.com/fr/USB2_0-To-RJ45-100Mbps-Gigabit-Ethernet-Network-LAN-Card-Data-Adapter-For-Win10-p-1097252.html?rmmds=myorder) expension board and usb ethernet woks perfectly but verry slow too. I'm on kernel 3.4.113. some logs if it's helps : http://sprunge.us/MIiO http://prntscr.com/gngv39 http://prntscr.com/gngvf9 Thanks for your …

I use a Beelink X2 Android TV box with Armbian Stretch mainline kernel 4.19.y Image on a SD Card. If I plug in my SD Card and then the power supply, the LED is purple and after some seconds blue. No picture over hdmi but the num-lock on the keyboard works. The box also don't get an IP over DHCP. No matter how long (1h+) I wait, nothing happens... When I plug in the power supply without the SD Card, the LED is red. The normal standby mode of the box. I can now plug in the SD Card and then power the system on. The LED switches to purple and after sone seconds to blue and Armbian is running fine, no problems. If the system reboots it will ru…

I know this is a well known topic but since I didn't find an issue like the one I'm having I felt the need of explaining it. I recently bought an Orange Pi Zero board + extension board with AV, micro and 2 additional USB + case. During the 3 days I've been testing it I've been having a lot of issues related maybe to the heat (or maybe not). I have built a streaming media server called Mopidy, which is pretty cool but at certain times it completely hangs when I'm reproducing audio (by the way, I'm using only stable Debian / Ubuntu because kernel 4.11 isn't detecting the soundcard for some reason). It sometimes takes 1 hour to get stuck, …

Hello, It's my first message, I'm very proud to be part of your community, Armbian is epic ! I'm trying to add a chinese screen copy to my orangepizero (H2+ cpu). This is my screen: https://www.aliexpress.com/item/32587995145.html (copie of https://www.waveshare.com/3.5inch-rpi-lcd-a.htm) 1) Yesterday i setup my screen on Armbian_5.91_Orangepizero_Debian_buster_next_4.19.59 with success with: nano /boot/armbianEnv.txt : overlays=spi-spidev spi-add-cs1 param_spidev_spi_bus=1 param_spidev_spi_cs=1 nano /etc/modules-load.d/fbtft.conf : fbtft fbtft_device nano /etc/modprobe.d/fbtft.conf : options fbtft_device rota…

Hi, my current project is about using a NanoPI M1 as a controller for a 3D printer. As such, one wants to have very tight timing on the GPIO output, with as little jitter as possible, to get smooth motion of the stepper motors. However, it is common belief that getting a fast timing with little jitter is virtually impossible to do under linux, without the help of a dedicated chip just for the IO. While that is true in general on stock kernels, it's possible to vastly improve on that front by spending a little effort. One way on ARM chips is to use the FIQ. That is an interrupt that has the highest priority, which can interrupt all other, regular interrupts. Ho…

I downloaded the jessie 3.34.112 desktop version of Cubieboard1 (Armbian_5.10_Cubieboard_Debian_jessie_3.4.112_desktop), loaded the microSD and got the attached boot which failed. This was captured from the serial console output. The console was being echoed to the HDMI also. On the monitor, I saw the console become the graphics window, with random garbage clearing, then the HDMI signal ended. I had the HDMI, LVDS display, USB wireless keyboard/mouse connected also. FYI boot.fail.zip

Hello, I have a special Ir Receiver which works on a raspberry but not on nano pi neo air... input levels are different ? I can receive signal (I have pulses and spaces) but datas are corrupted and I must transmit longer to have a proper result... Is it possible to change Lirc input pin ?

Hello, I installed ARMBIAN 5.38 stable Debian GNU/Linux 9 (stretch) 4.14.14-sunxi on H3 OpiZeroPlus2 board and temperature is 60C (just after boot, nothing is running, CPU 0.5%) Is it normal? P.S. I saw overheating problem on H2+ OPi boards, but no idea if H3 also suffers from this.

Hi, I am trying to use Orange Pi Zero. When I connect TTL debug port eveything ok. I can connect Wi-Fi from TTL command prompt. I can make update, download application but I cannot connect with SSH to device over Wi-Fi. But when I bring Orange Pi near to Wi-Fi modem(about 1m) I can connect ssh. I cannot find any solution about this problem. When I use wavemon to check Wi-Fi signal strength, I saw this values; signal level : -40 dbm, link quality: 91/100 If someone help I will be very happy, because I cannot find solution for days. Thanks a lot

Hi all. I followed this tutorial and I got the AP and client mode working. wlan0 using the onboard wifi as the AP and wlan1 using a usb dongle as the client connecting to my wifi network. But when I connect to the PI and got an IP address via dnsmasq I am not able to get to the pi its self. I can not access anything on the PI. I have a web server running on it. How do I get to the services on the Pi it self via the AP I created. Basically what I want to do is have the client connect to the wifi network if there is one or if the pi is in range of the wifi network. But then if there is no network then I want to connect to the…

The documentation on the Orange Pi Zero Plus 2 is somewhat scarce. I couldn't find information on the GPIO map for the 26-pin header anywhere, but I manually mapped it. I did this with an LED on each successive pin and testing through the /sys/class/gpio driver until I found the one to control it. This caused a bunch of resets and eventually corrupted my sd card, but I got the info Each of the numbers below is the GPIO number used for /sys/class/gpio. For example, 110 means gpio110. The list is by pin number from 1 to 26. A value of -1 means unavailable (as far as I could discover): -1, -1, 12, -1 (pin 1,2,3,4) 11,-1,6,0 (pin 5,6,7,8) -1…

Hello, I'm having problems with USB sound card - speaker - card reader combo, named CD002 (hardware ID e2b0:0811). I managed to make it work with clean Armbian 5.38 image (kernel 4.14.14) by installing pulseaudio, but it sounds like crap using both mplayer and aplay; mplayer reports "audio device stuck" sometimes. The card is definitely OK, on RPi3 running DietPI it worked immediately and sounds fine. How do I set it up correctly so that it sound fine on OrangePi Zero & Armbian?

Hello and hi everyone. So I've got a Cubietruck with the NAND replaced by TSD eMMC. The TSD behaves like an SD card, and previously tested to run OK using Cubieez-TSD. However, I need to run Node.JS on the Truck, and the Cubieez Debian Wheezy Node.JS support stops at v6 (now we're at NodeJS v8). Ubuntu Xenial will still have NodeJS v8 support, so it's good excuse to change to a new OS. I'm using this image to successfully flash my SD card: Armbian_5.31_Cubietruck_Ubuntu_xenial_default_3.4.113_desktop. First time booting the CT from SD, I got the usual prompt, then the desktop loaded. First problem: The screen is misaligned. https:…

Hi team, I am trying to get a voltage drop (3.3V to about 0V) detected on a GPIO pin on my OrangePi Zero running Armbian buster 20.02.1 with Linux 5.4.31-sunxi. I have another OrangePi Zero on which I have already managed to install I2C OLED screen, and the i2cdetect was working, and so on... For this one, I got a problem with the gpio group not existing. As I tried to install OPi.GPIO, I got usermod: group 'gpio' does not exist It's an Armbian version that I downloaded yesterday, and upgraded today with armbian-config. So... What did I do the wrong way? Thanks.

Hello, please tell me how I can configure the processor on my Orange Pi Zero to the maximum frequency and voltage, as well as how to do SWAP and register it at startup, I use active cooling radiators and a cooler, I am warned of a possible failure, thank you in advance!

Back in March I ran into problems with the community builds for the NanoPi Neo, for Debian Bookworm. It would boot up initially, but within 30 minutes or so, it would crash. So I did a fresh install from the last official build I had saved from June 2023: Armbian_23.5.2_Nanopineo_bookworm_current_6.1.30 And then I froze these packages to keep the working firmware and kernel: armbian-firmware/bookworm,bookworm 24.2.1 all [upgradable from: 23.05.1--1-SAfece-B6ae3] linux-dtb-current-sunxi/bookworm 24.2.1 armhf [upgradable from: 23.05.1--6.1.30-Sa343-D8bc9-P73a0-C162eHfe66-HK01ba-V014b-B9c18] linux-image-current-sunxi/bookworm 24.2.1 armhf [upgra…

I tried changing script.bin/fex > usbc0 (settings) with many combinations but was not able to get the USB port working as genreal USB host ... so what am i missing ? Target Board :- Banana Pi. Target Os :- 3.4.112 (Armbian_5.10_Bananapipro_Debian_jessie_3.4.112_desktop)

OrangePi plus2e how do I get hardware acceleration to work in smplayer? I am recording tv using tvheadend and trying to play back using smplayer. I have tried the available options for video output driver and X11 (slow) is by far the best but is not useable as there is still alot of stuttering. top shows 138% mpv usage vdpau is colored almost horizontal lines All help is appreciated Dave

Hello, I would like to connect RFID-RC522 to OPI 3 LTS My wiring as bellow VCC -> Pin 1 GND -> Pin 9 MOSI -> Pin19 MISO -> Pin21 SDA -> Pin24 SCK -> Pin23 RST None I wired it based on this chart Then I edit the armbianEnv.txt added Reboot . But still not see the /dev/spi Where am I wrong?

I purchased a usb wifi adapter RTL8192EU chip, 300Mbps. Requires Driver Installation (CD was provided with the adapter), When I tried to install driver on Orange Pi PC / Armbian, gave error. Need help. This is what happened: 1) Copied following 2 files from CD to Orange Pi PC by SFTP: rtl8192EU_linux_v4.2.2_7585.20130524.tar.gz install.sh 2) Run the installation script $ sudo chmod +x install.sh $ sudo ./install.sh 3) Output generated: Decompress the driver source tar ball: rtl8192EU_linux_v4.2.2_7585.20130524.tar.gz rtl8192EU_linux_v4.2.2_7585.20130524/ rtl8192EU_linux_v4.2.2_7585.20130524/clean rtl8192EU_linux_v4.2.2_7585.…

Hello Im trying to mount an USB HDD on my Orange Pi One with Armbian 5.20 like this and never mounts. In previous versions i was able. What i do is add this lin to Fstab /dev/sda1 /mnt/usb ntfs auto,users,noexec,rw, uid=1000,gid=1000 0 0 Anybody tried to mount any usb with Sucess? Thanks 4 ur help

Well, the title is self explanatory. I am trying the new stable release for the Orange PI win from armbian (thank you guys!) but when booting for the first time in headless mode via SSH through Ethernet cable it gets stuck at "Enter new UNIX password". I put the new password and nothing happens. If I unplug the cable to force the SSH server to close the connection and then I plug it back again, the password is kept the old one (default 1234) and the problem repeats. After some tests I finally got to change the password, but it gets stuck after, or even before sometimes if I reboot. It seems that the SSH tunnel is simply not stable. I should mention that the configura…

Hi congrats for the wonderful job with Armbian, i own a banana pro and I've found a great projet for rasp called Dietpi (http://dietpi.com/), Unfortunately the creator hasnt got a Bpro so he is not able to make it for our board, I'm asking if anyone is capable of making this suitable for us? It would be even more awesome, thank you

I have an external audio card connected to usb lsusb Bus 007 Device 014: ID 0d8c:013c C-Media Electronics, Inc. CM108 Audio Controller I have a problem that after rebooting the system ... Once it is detected and another time it is not :-( dmesg|tail [ 40.820066] usb 7-1: device descriptor read/64, error -62 [ 41.110045] usb 7-1: device descriptor read/64, error -62 [ 41.400108] usb 7-1: new full-speed USB device number 11 using sunxi-ohci [ 41.580056] usb 7-1: device descriptor read/64, error -62 [ 41.870068] usb 7-1: device descriptor read/64, error -62 [ 42.150067] usb 7-1: new full-speed USB device number 12 using sunxi-ohci [ 42.570119] usb …

Hello I wrote aind compile little module only for tests: #include <linux/module.h> #include <linux/sched.h> static int errval = 0; //module_param(errval,int,S_IRWXU); module_param(errval,int,S_IWUSR|S_IRUSR|S_IWGRP|S_IRGRP); MODULE_PARM_DESC(errval,"Value to return from init function"); int my_init_module(void) { printk("errval=%d\n",errval); return errval; } void my_cleanup_module(void) { printk("The module is now unloaded\n"); } module_init(my_init_module); module_exit(my_cleanup_module); MODULE_LICENSE("GPL"); compile by: make -C /lib/modules/6.6.75-current-sunxi64/build M=$(PWD) modules And it cause segmentation fault only…

Hi All, Is here somebody, who use R1+SATA disk+wifi together? (with Igor's great debian with kernel 3.4.107) When I switch on wifi, everything seems to be ok. I live in highly interfered area, so performance is sometimes low, but everything works for several hours. After several hours my R1 gets frozen. Last log message is "DHCP ACK" from my wifi printer. The question is, can it be power issue? I have USB power meter and current sometimes exceed 1,5A, but voltage holds still above 5V. When I tested the board with OpenWRT, I had connected USB LTE modem to R1, wifi was switched on too, but system was stable. Another thing is that OpenWRT has a bug in wifi driver and…

Hello I was wondering how can make possible usage of software raid1, using integrated emmc and another card placed into the slot. So far I have used that on Slackware x86 without any issue, but there I tells the Lilo to boot from /dev/md0 for example. Wonder where I should make adjustments here (in Armbian(. Can someone point me at the right direction?

Hi all, I'm starting with armbian and Banana pi m2p card. I entered image 4.19.21-sunxi, I can not make BT work. with armbian-config I have enabled the BT, next systemctl start bluetooth. with systemctl status bluetooth: Feb 18 18:01:30 bananapim2plus systemd[1]: Starting Bluetooth service... Feb 18 18:01:30 bananapim2plus bluetoothd[1779]: Bluetooth daemon 5.48 Feb 18 18:01:30 bananapim2plus bluetoothd[1779]: Starting SDP server Feb 18 18:01:30 bananapim2plus systemd[1]: Started Bluetooth service. Feb 18 18:01:30 bananapim2plus bluetoothd[1779]: Bluetooth management interface and root@bananapim2plus:~# bluetoothctl Agent registered [bluetooth]…

In the "next" Vanilla version of Armbian for CB1: cubie@cubieboard:~/Apps/test-gdb$ uname -a Linux cubieboard 4.5.4-sunxi #1 SMP Wed May 11 16:51:05 EDT 2016 armv7l GNU/Linux cubie@cubieboard:~/Apps/test-gdb$ lsb_release -a No LSB modules are available. Distributor ID: Debian Description: Debian GNU/Linux 8.4 (jessie) Release: 8.4 Codename: jessie The following option is not set in the kernel configuration: CONFIG_OABI_COMPAT=y When this is commented out, debugging fails with an illegal instruction if you do anything other than run, just about. Possibly a coincidence is that "less /proc/config.gz" stops working when that option is set --- dunno. Don't …

Hello, what is the difference between /sys/devices/platform/sunxi-i2c.0/i2c-0/0-0034/temp1_input this return 37800 and /sys/devices/platform/a20-tp-hwmon/temp1_input this return 46500 what value is correct? there are writing http://bananapi.com/index.php/forum/beginners/141-how-to-read-cpu-temperature You can find the CPU temperature data at "/sys/devices/platform/sunxi-i2c.0/i2c-0/0-0034/temp1_input" but bash.bashrc.custum use value from /sys/devices/platform/a20-tp-hwmon/temp1_input thanks hw: Banana Pi BPi-M1+

Hi all, I have on the board the AP6181 Wirelesss (brcmfmac_sdio). I try use like AP and works, but isnt work Karma, mana and monitoring.... Somebody know some patch or driver to make this work? Or i need to find an ARM board with atheros or ralink?? Because i never find one!! Thanks

Hi, I am fairly new to the SBC board and struggling to begin my setup of the NanoPo NEO Air. This little board is a perfect fit for my project I need to develop. The first problem I encounter is the following: There are no HDMI port. Thus I can't do the basic configuration for my network and allow an SSID access. Does anyone has a solution to preconfigure the WIFI of my Armbian from windows (or Linux if needed)? My second problem will be: I would like to install my system on the EMMC flash to not be dependent of the SD card. Can you confirm I would only need to run the command "nand-sata-install" when I will get…

Hello. Some facts: 1. Boot with image based on legacy kernel cause shutdown after some (less than 10) seconds after power on. 2. Boot with image based on vanilla kernel always ok. 3. If i try to boot without SD card, than power off Cubie with button, then insert SD and switch on with button - it will boot OK with lagacy kernel! Which logs can help to find the problem? I ought to use legacy kernel - i need internal soundcard and both USB. And I see that it is not my own problem - http://forum.armbian.com/index.php/topic/1593-armbian-cubieboard1a10-desktop-with-legacy-kernel-wont-boot-just-shuts-off-cubieboard/- i think we can help to find the bug.