Amlogic CPU Boxes

Problem: It starts to boot, I see the Armbian splash screen, it stays for around 10 seconds then goes back to console with the (initramfs) prompt. Last 2 lines of boot process are: Begin: Loading essential drivers . . . done. Begin: Running /scripts/pre-mount . . . (initramfs) [ 37.824201] random: crng init done (initramfs) I got it to boot once into GNOME by putting a USB flash drive with the burned image AND a SD card at the same time. But that was only once and I could never repeat it. This happens on both versions of the X96 I have. And I've followed everything here: I've tried bookworm…

Hi. I apologize if this is in the wrong section, I'm new to the forum. I'm trying to run Armbian on the Jadoo 4, which is a rebranded MyGica/Geniatech ATV 585 Android TV box. This device has an Amlogic S805 with an "stvm8b" board. I've been trying to follow these two tutorials (Video 1 and video 2) but when I insert the SD card into my device and hold down the rest pin, I end up in the recovery menu instead of booting straight into Armbian. Can someone help me out and give me a specific guide on how to do this? I know this information has probably been said a bunch of times on this forum, but I am genuinely lost. If it's important, I'm looking t…

it's a pronlem x96 mini non install destop

I have an OTT TV Box, model ABOX-A1 ( 1G + 8G, S905X ). It is running Armbian 23.11.1 bookworm. How can I have hardware video decoding? Hardware video decoding support seems present in the 6.1.63-current-meson64 kernel. It seems only the V4L2 M2M API is present. Some firmware seems missing. I was getting "meson-vdec c8820000.video-codec: Direct firmware load for meson/vdec/gxl_h264.bin failed with error -2" in dmesg. I don't know what package I need to install. I was thinking maybe firmware-linux-nonfree, but that conflicts with armbian-firmware due to firmware-ralink. The files are available at https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-fi…

Hello from France, I look for a firmware compatible with my Box Beelink GT1 Ultimate, and I would like to test the firmware for Beelink X2 but unfortunatly all links are broken. Can you help me Happy new year 20121

Hi guys, I'm new, I would like to know what is the latest kernel available for my tx3 mini with s905w chip, preferably debian or ubuntu. Could you find a link where to download it? Thank you

Hello everyone, I have a device from this brand. An ISP in Turkey distributes this device. It needs to be unlocked. I want to install Armbian on it. However, it doesn’t look like any device I’ve seen online. The motherboard is different from all the devices I checked. Is there anyone who can help me? I can access the device via ADB. I can install APK files. The device has an S905X processor and 1 GB of RAM. It is running Android 9.

Hello, I am using an X96 Air (S905X3) with Armbian (6.1.127-ophub) and I can see the hardware decoder working: v4l2-ctl --list-devices Amlogic Video Decoder (platform:meson-vdec): /dev/video0 However, the hardware encoder (VENC) does not appear: ls /dev/video* /dev/video0 ls /dev/amvenc* ls: cannot access '/dev/amvenc*': No such file or directory I want to use ffmpeg with hardware encoding (h264_v4l2m2m) for real-time RTMP streaming, but without the encoder device, it is not possible. Could you please explain: Does this kernel support VENC on S905X3 at all? If not, what changes are required to enable hard…

Hi all, I'm trying to boot Armbian from USB on a Foxconn BANDOTT BA101 (Amlogic S905D, 2GB RAM, 8GB eMMC — same SoC/RAM/storage as a Phicomm N1, originally shipped with Android TV 7.1.2). I'm running purely from USB, never touching eMMC. What works Armbian_24.5.0_amlogic_s905d_jammy_6.6.28_server_2024.04.25.img (ophub build) Flashed to USB with balenaEtcher Plugged into the box, powered on Boots directly with no modifications — no manual u-boot.ext, no dtb edits, no extlinux changes Network, IR, HDMI all good What doesn't work Armbian_community_26.2.0-trunk.821_Aml-s9xx-box_resolute_current_6.18.26.img (official community build…

I have found my old Media-Player and I will use them for a special task. It´s labeled "MK808B Plus" OpenELEC 5.95.5.2 is installed. Now I will run Armbian_5.67_Aml-s805_Ubuntu_bionic_default_3.10.108_desktop_20181207 from @Balbes150. I use the meson8b_mk808bplus.btb. But the WLAN is not working. For the first run I have change the "armbian_first_run.txt" the value "FR_net_wifi_enabled=1" How can I use the WLAN? How can I make a new "fresh" run that the "armbian_first_run.txt" is execute? How can I put the armbian to the NAND?

Hello all, I installed armbian on my TV box. It work correctly (I installed home assistant and It work properly). however, I have a problem with bluetooth. It doesn't work. I do some investigation : install the bluetooth support with apt-get update && apt-get install bluetooth check if this work with : service bluetooth status and it return bluetooth is running I try to connect device with bluetoothctl and it not working. It return No default controller available version : v25.02.0 for Aml.S912 running Armbian Linux 6.6.67-merry-christmas Packages: Debian stable (bullseye) I use this dtb file : meso…

I want to install armbian for my board. I like the 3.10.XXX version. Currently tested: 1. Armbian_5.64_Aml-s812_Ubuntu_xenial_default_3.10.108_20181022.img 2, Armbian_5.77_Aml-s812_Debian_stretch_default_3.10.108_20190326.img 3. Armbian_5.77_Aml-s812_Ubuntu_bionic_default_3.10.108_20190326.img After the above version is installed, the startup screen will be blurred, how can I solve it? I tried "Armbian_21.02.0-trunk_Aml-s812_buster_current_5.10.0_.img" dtb can run normally with meson8m2-m8s.dtb. But I want to use the 3.10.xxx version. Can you help me?

Hi, My STB run latest Armbian from ophub Armbian_24.11.0_amlogic_s905x3_noble_6.6.58_server_2024.11.01.img.gz. it run on microsd with change the dtb file location in uEnv. But i made mistake with remove partition on eMMC and format it to BTRFS. Now my box is just bootlop. I try to recover using USB Burning Tool with oem Firmware but it always end with romcode error. I Try using TWRP with boot maker it can enter TWRP. i need to press the toothpick on AV jack. When i try to install the oem Firmware it say that emmc is 0mb. I try to change the file system with advance wipe option but got error that the storage can not mount. I guess the TWRP not recog…

Hello everybody, I need help because I screwed up when trying to install the system on emmc. The emmc is formatted and does not allow to initialize a boot sequence😢 A connection on JDEBUG1 shows that the box loops on this initialization sequence again and again. GXM:BL1:dc8b51:76f1a5;FEAT:ADFD718C:0;POC:3;RCY:0;EMMC:0;READ:0;0.0;CHK:0; TE: 136356 BL2 Built : 14:17:47, Apr 18 2017. gxl g95dc662 - xiaobo.gu@droid05 set vdd cpu_a to 1120 mv set vdd cpu_b to 1050 mv set vddee to 1000 mv Board ID = 1 CPU clk: 1200MHz DQS-corr enabled DDR scramble enabled DDR3 chl: Rank0+1 @ 912MHz - PASS Rank0: 1024MB(auto)-2T-13 Rank1: 1024MB(auto)-2T-13 DataBus test pas…

Hi. I have an old Tanix TX3 box that I want to use as a backup [1 part of the 3-2-1] drive. I installed Armbian_24.8.0_amlogic_s905x3_noble_6.6.46_server_2024.08.15.img and I'm currently in Armbian OS 24.11.0 Noble with Linux 6.6.53-ophub. I tried to mount several USB drives and even an nvme external drive and can get it to work. Can, anyone, please help me? Thanks. Miguel

Hi guys, I try to install Armbian on my Amlogix G11pro (S509X2 based) TV Gamebox. It keeps booting only into my Emuelec SD card, if I plug it or with anyhting else it only boots into Android that is on eMMC. I understood that I have to use the toothpic method to press the reset button to get into the recovery mode. I tried this but failed as my toothpic didnt reach anything I could click, it just went through. so I opened the box and found that behind the audio jack there is nothing (see attached pic). there is empty space with three connectors on the board, maybe that is the place where usually the micro switch for the reset button sits, but I am not sure. Before …

Hello guys, im trying to install armbian to internal emmc, but armbian-install neither the other file exists, please help, thanks

Hello. I installed an armbian TV box for home automation. Everything works fine, but if the hdmi cable is removed, the TV box does not start. It starts successfully only when the hdmi cable is inserted into the TV box. Tv Box X96 Mini the system is installed on a USB drive I ran it according to this instruction https://github.com/kdrapel/x96mini_linux

i am trying to install armbian on a vorke z6 plus s912 amlogic box. As there is no S912 dtb, i tried using /dtb/amlogic/meson-gxm-t95z-plus.dtb with this iamge: Armbian_26.02.0_amlogic_s912-t95z-plus_trixie_6.18.15_server_2026.03.01.img.gz renamed u-boot-s905x-s912.bin to u-boot.ext After inserting and pressing the reset button, before applying power, i get into the recovery menu What dtb file or image can i use to get armbian running?

I have recently found this great project and have converted my old unused and dusty s9xx TV Boxes to ARMBIAN for use as remote NAS and other applications. I have X96 Max Plus 2 T, Beelink GT1, and 2x Beelink MiniMXIII II (total of 4 boxes). For the Beelink MiniMXIII II I used the meson-gxl-s905x-p212.dtb out of the box and it works great (100Mbit Ethernet and WIFI) For the X96 Max Plus I had to go to https://github.com/ophub/amlogic-s9xxx-armbian/releases and extract and use the meson-sm1-x96-max-plus.dtb file (Gbit Ethernet works but WIFI doesn't) For the Beelink GT1 I again extract and used (from https://github.com/ophub/amlogic-…

Hello everyone, I have a Beelink GS king X android box with 2 hard drives. I want to be able to install a jellyfin server to share and synchronize my videos, audios and images on my other devices. On these other devices, I will use either Kodi or Corelec for playback. Is it possible and reliable to install Armbian on Beelink GS King X to be able to install a Jellyfin server, but also a samba sharing server to share all my files? Or should I rather opt for another CoreElec or Manjaro type solution for example?

One question, how do i install kernel headers? I tried using armbian-config but it installed linux-headers-6.1.11-meson64 but the kernel is 6.1.30-meson64

While clearing out a load of old computer bits I found an old Keedox M8N android TV box I had years ago. Before I dump it, is it usable for anything now? Can I install Linux on it for example?

I want to install linux on rkm mk12 tv box because its pretty much useless with its ancient android and i want to use it as a server mainly alongside my raspberry pis, now i tried to do some research but guides and forum posts are very few and outdated so can anybody help me and tell me what steps do i need to do to install linux on this tv box? Also its powered by an amlogic s812 soc, full specs can be found on this website: https://hometheatrelife.com/rikomagic-mk12-review/ Thanks in advance!

Anyone try to install the OS into nokia box?? The box has amlogic s905X3 chip, but when I press reset button and try to start from usb, the box boot on recovery mode android. How should i proceed?

All the steps described by @SteeMan are fine. The details are the particularities of each TV BOX, in case of Brazil, the box are the low quality and price (the cheapest box of the market). I had many difficulties with a RUPA A9 Diamond with S912. Initially, the problem was the network, so I created new dtb´s files based in a post of someone. All the steps are described here: linux_variety/notes.txt at master · claudiosa/linux_variety · GitHub some steps to generate dtb and dts Later, the sound was not working, fortunately I tried some others dtb without the procedure describe above, i.e. without network. Fortunately, the first experiment with "MeCool K…

Hello. I have a problem that's been driving me crazy, and I think I'm not the only one. I'm using Armbian version v25.05.0 for Aml.S905x running Armbian Linux 6.12.19-ophub Debian stable (bookworm), and I managed to install RealVNC Connect, for which I have a license. The problem I'm having, and I can't find a solution, is that by default the GDM3 desktop launcher uses Wayland, and when I connect externally to the server, I only get a black screen with a message saying "the desktop cannot be displayed at this time." I'm using GNOME, and I've tried different desktop environments, but they never work, even after selecting them from the gear icon. It just acts like it's goin…

I have an Amlogic s912 box, been trying to follow @balbes150 directions but it al gets confused. (from here First I tried to install an old version until I found out config. method was changed, so I downloaded a newer version. (current Debian and Ubuntu "desktop" based images) I burn them on sdcard, but there's no file "u-boot.ext" to rename. And now I have just read I need to burn both things on separate processes... It's quite confusing and misleading. It would be great if instruections were completely reworked and reordered so not to induce others on error. I'm techa savvy, I've done some programming, I own servers running Linux, I have instal…

I have an X96 mini Tv box with S905W CPU. I'm booted from SD card roughly successfully (image by balbes150: Armbian_20.10_Arm-64_focal_current_5.9.0.img.xz). Unfortunatelly the end of boot failed a important component and SSH don't work. Do you know a solution?

Hello i booted with armbian in a usb pen. It installed correctly, i guess, but removing the usb pen and rebooting the Tanix TX3, boots again to the tanix tv box and not with armbian. What i did wrong ??

Hello . I am new to Linux I need to install armbian on x96 mini to run Klipper server for 3d printer on it. I tried many builds but native WIFI doesn't work anywhere. Also, usb wifi does not work on RTL8188FTV. I tried to install the driver from the links https://forum.armbian.com/topic/12160-x96-s905x-driver-rtl8189es-and-rtl8188ftv-for-octoprint-and-klipper-3d-printer/ but can't find a working install kernel headers. Can someone help me choose and install any assembly for the s905w processor on which either native wifi or RTL8188FTV will work. Please help a newbie.

Cinnamon desktop environment is bugged for me, both my a95x r2 (amlogic s905w) and a95x f3 slim (amlogic s905x3) showing no display, blank screen like no input after loging in. My suggestion for desktop ubuntu based varian, better change it to Mate desktop. The armbian desktop cinnamon varian based on ubuntu is now work for me after switching to mate desktop

Hi, I'm using the image Armbian_23.02.2_Aml-s9xx-box_bullseye_current_6.1.11.img on my Box TV Tigre 2 with Amlogic S905x processor and the dtb meson-gxl-s905x-p212.dtb and all the things I need are working, except the HDMI Audio output. Using the command "aplay -l" it shows no soundcards found but using the command lsmod | grep snd it shows different sound modules so I think it's a driver problem Also using armbian-config and going to system->hardware it shows an empty list. Any ideas on how to make it work?

I apologize for opening a new thread but I could not find any related thread on this specific problem. I use unified images for Armbian 20.10 recently downloaded from this site. Most things work out of the box. I have however a problem with audio sink not being available for HDMI Tx audio. I tried manually mounting the kernel module (sound/soc/meson/snd-soc-meson-g12a-tohdmitx.ko) but this leads to no output (whether error or dmesg), and the module does not appear in the lsmod output. I am assuming that I use the correct DTB since everything else works. My box only has 1GB, I know that there are 2GB variants out there. I'm …

Attempting Armbian install onto an S905. Hardware specs at https://specdevice.com/showspec.php?id=6653-4ac9-1101-570d0033c587 Kernel begins to boot but gets errors and never completes dropping into initramfs shell. Was able to capture the dtb blob from the Android kernel and decompiled it. Enough differences to the dtb files in the Armbian distribution that I cannot figure out how to create a dtb file that will work. Have looked for other files on the internet but haven't come across something similar yet. Booting gets stuck in a loop of: meson-gx-mmc d0072000.mmc: no support for card's volts mmc0: error -22 whilst initialisin…

The android tv box(Jio STB) is completely locked down. It can run apps only that the manufacturer has included and through their store. adb is disabled. There is almost no way to sideload apps. I have tried to use UART with usb to ttl converter to gain access to root and below is the screen that I have got. I just want to just sideload apk files in it. Anyone please help. output on putty after turning on the stb : - https://drive.google.com/file/d/1viB7AEZr_634XNDCq6A7cdoEbi90Q_lI/view?usp=sharing

I found a .dts file for my TV set-top box on an amlogic processor, and I want to compile this file for Armbian, please tell me how to do this, my TV box is K1 plus. https://github.com/CoreELEC/device-trees-amlogic/tree/master

Hi, please help me install Armbian. Hardware: I have an X96 TV box with 2GB of memory and 16GB of storage. Software: I'm trying to install Armbian_23.08.0_amlogic_s905x-t95_lunar_5.15.132_server_2023.09.21. I downloaded the image, wrote it to the SD card and successfully booted using the toothpick method. Booting from the SD card is successful, everything works fine. When I try to install Armbian on emmc the installation just stops. If you cancel the installation (ctrl + c), the system continues to work normally. I also tried using the image Armbian_23.08.0_amlogic_s905x-t95_lunar_6.1.52_server_2023.09.12. To install, I use…

Is possible to make Armbian to work on the FlowBox F1 from Telecom Argentina (SkyworthDigital HP20A)? I attach a photo of the device

Hello, Thank you for the guide how you do that? I've succesfully installed armbian in my X96max+, but the "thootpick" doesnt work anymore, so cant use any usb_burning_aml to "rollback" into original android.

I was searching for WI-FI Drivers for my X96 Mini because I was using my device with Armbian ophub's build. The only-ethernet thing kinda annoyed me so dived in and found there's a fix. A guy named lukas-kuna found a fix for the WI-FI chip (HERE). So I tried the fix and It really worked. So I decided to create a driver myself for Future use and for my fellow users. I used the Driver on Armbian 26.08 Build by ophub and the kernel version is 6.18.37. I created a Github Repo so I could share how I did it and how you could do it too. I Used DKMS to Automate the installation process, theres other ways to do it too. Also the DKMS method ensures driver doesn't disapp…

I have a tx3-mini 1G-ram 8G-Rom device and I installed the versions images available on the site on it. I have three questions: why does it stop working when I update the operating system? - The site of benchmark says that the s905w cpu has a speed of up to 2GHz, but my system does not speed up more than 1.2 GHz. And the last question: some of the images available on the site are installed on it, and some are not. The ones that work also stop working with the update. Of course, not with a single update, when it works for a week, you update it during the week, and from some point on, it will not boot again. This is because my device is fake?

Hi, I have the following box mini m8s with specs: Mini M8S technical specification CPU – Amlogic S905 quad core ARM Cortex-A53 @ up to 2.0GHz GPU – Penta-core Mali-450MP Up to 750MHZ, OpenGL ES 1.1/2.0 and Open VG 1.1 support Memory – 2GB DDR3 Storage – 8GB NAND flash + Micro SD card slot (up to 32GB) OS – Android 5.1 https://androidtvbox.eu/mini-m8s-new-tv-box-android-5-1-powered-amlogic-s905-promo/ I am trying to install armbian but without any success. From different places I downloaded images and dts, but it does not boot and no way I can boot. If anyone has a working configuration I would be grateful to share links and instr…

I was running armbian on emmc on an X96Air 4GB/64GB 1GBit S905X3 box a while ago and then after a power down it bricked. No boot screen, no android (obviously) - it sent a HDMI signal, but nothing. Managed to recover it and get Android flashed on it again then Armbian again on SD then emmc. Just done "apt upgrade" to get things up to date. All went well, then a reboot, and..... bricked again. Nothing obvious, no issues. I'll go through the process again - Android -> armbian sd -> armbian emmc But is there a known issue with any boxes that just brick themselves? Any ways to avoid it? This box is par…

I people, I get a tv box model "T96 D", but in the manufacturer site, this model doesn't exist. In the board is writen "T96 Mars" so, I follow the armbian installation steps for this model, but after "Starting kernel" the screen was black. I share images of the board and the screen. Thanks for advance guys.

Hi, I have an 5.9.0 arm 64 installed on my x96 mini. 905w soc. Wifichip 5061. Wifi in not loading. I have in lib/firmware a ssv5061.bin and cfg. Need help in loading the module. When I write modprobe 5061 it returns module not found in directory lib/modules/5.9.0-arm-64. Please help,

Hi all, I've loaded Armbian 20.10 Arm_64 Bullseye 5.9.0 image on a X96(S912). No issues while loading the system, a prompt for login is presented, but it does not recognize any keyboard that I plugin. Tryed out via ssh but isn't possible to ping the server, so I believe ssh connection might not be automatically set. Maybe some one have an idea on how I can solve this issues. Thanks in advance.

I have TV-BOX Ugoos SK1. how I can Install Armbian for it. My TV-Box using chip S928X-K this is device information: https://ugoos.com/ugoos-sk1-8-128-gb-amlogic-tvbox-s928x-k Best regards

Hi friends, could anyone tell me if Armbian is compatible with S905X5M? Thanks. Regards.

hi im trying to install armbian on a t95m s905x box but for some reason it dont want to boot i installed batocera in the past, could it be the problem here?

I got my H96 pro+ to boot into Armbian using the S912 .dtb file (meson-gxm-s912-libretech-pc.dtb) and u-boot-s905x-s912 I get the loading screen, then a black screen with a cursor, and then repeated [FAILED] messages: about a dozen "Failed to start access point and authentication server for WiFi and Ethernet", then "Failed to listen on OpenBSD Secure Shell server socket" Then [ 177.5586911] systemd-journald[1045]: Data hash table of /var/log/journal/e8131ef5db8049a6a008b6f40cd0e8eb/system.journal has fill level at 75.0 (3415 of 4551 items, 2621440 file size, 767 bytes per hash table item), suggest rotation. [ 177.5586911] systemd-journald[1…

Hi, I am using the Debian from below location. Running Containerized Home Assistant on my H96Max X3. After I started using that distribution instead of the very old balbes one, I have started to get crashes about every 5-7 days or so. Did slow down CPU in case it was heat etc, but no luck. Any ideas how I can troubleshoot this ? It just freezes and becomes unresponsive on network (ethernet and Wifi). I have not tried with keyboard/screen. I do have a WiFi power switch connected to it, so one of my other devices can power cycle it, but that is not the right solution. Tried a few upgrades. Downloaded from a source that uses Armbian's name without pe…

Hi. I'm out of my depth here, but I noticed that one of the official Armbian builds with platinum support is for the Khadas VIM1S, which has a S905Y4 SOC with 2GB of RAM. This is a similar configuration to many cheap Android TV boxes. According to some sources I can find, the S905W2 is also in the same family as the S905Y4 (Amlogic NE S4). Both are also supported by Coreelec, although I understand that Coreelec DTB's can't be used with Armbian. What would be involved in porting Armbian from the VIM1S to S905Y4/S905W2 TV boxes? Is this likely to work, and where could I start? Thanks!

Right now I am using meson8b, I wanted to install armbian on my Android TV box but after some research and searching on Google I didn't find any of image file and their may not have any building guide. Please help me to do it so.

Hi, is there any way to install Armbian on the built-in emmc memory on an mxq 4k pro with an s905w processor? Should I follow these guides? https://7ji.github.io/embedded/2022/11/08/alarm-install.html https://7ji.github.io/embedded/2022/11/11/ept-with-ampart.html Or is the built-in script in the system sufficient and will do everything without damaging anything? I would be grateful for any tips

Hello, I’m working on an s905x3 Armbian system, and having issues with an intermittent watchdog: The hardware watchdog: Meson GXBB Watchdog I’ve got the watchdog service installed. Expected behaviour, happens 4/5 times: when I kill the watchdog service, it starts wd_keepalive, which keeps on pinging the watchdog. Kill wd_keepalive and after a few seconds the device power cycles, as is expected. But sometimes that doesn’t happen, and the device just continues running. The watchdog device is also then writable (which it usually isn’t, due to being kept busy by the above processes) I’ve found this because sometimes the device doesn’t power cycle after…

Sorry - this is probably an easy one for those that know. But I am trying hard to copy my work and progress and build another NAS out of another T95z Plus box for my brother. All is going well - but on the second box - months after building the first - I installed the latest download. So I have Old box = Armbian Linux 6.12.32-current-meson64 - v25.5.1 New box = Armbian Linux 6.12.34-current-meson64 - v25.8 rolling - Support:for advanced users (rolling release) Both show - Ubuntu stable (noble) - which I think I changed on first boot with Armbian-config. Okay - so I don't think I am an advanced user so that warning has got me worried. …

I dug up an older box, a Transpeed 8K, S905X3, 4GB...tried Armbian_22.11.0-trunk_Aml-s9xx-box_kinetic_edge_6.0.10.img.xz, with the dtb for X96+ unhashed. I tried multiple times holding the reset button for 15-30 seconds, but it never boots. I'm pretty sure this one was sold under a different name, but haven't confirmed it yet. Anyone got any ideas on how to get this one running Armbian? Thanks, KC

Hello, beloved community members! I hope you're all doing well. I haven't looked at my A95X F3 Air for quite some time, and I've got a few questions about the TV box. I'm interested in installing Armbian on it and I'm wondering which version of Armbian and Linux kernel would be most suitable. Last time I attempted this, there were issues with the RTL8821CU driver, specifically for an older Android Linux kernel, around version 4.9. I've come across this URL (https://github.com/ophub/amlogic-s9xxx-armbian/issues/269), suggesting more recent kernel versions now support the wifi chip. Can anyone confirm this, or recommend a version where there are no longer issues? …

Hi, Does Someone have a dtb file that enabled the ethernet network for mecool the km3 tv box? The meson-g12a-sei510.dtb file does not enable the ethernet network card in my mecool km3 tv box. The speed of the ethernet network card of my mecool km3 is 100 MB. The motherboard is km9 X2 LP4 v 2.2 Two year ago i installed armbian in this tv box with network ethernet card running without problem, now i need to install armbian again but i do not remember that dbt file i used...It only i remeber is that i download from this forum and it was shared per someone but now i hasn't found the dbt file. The error that is showed in Dmesg files …

Hi, here I want to report Armbian_20.10_Arm-64_focal_current_5.9.0_desktop boots and run on a Beelink Mini MX S905,1gb, 8gb rom, using meson-gxbb-p200.dtb The wlan, an external usb hub, a usb Keyboard and a mouse work as expected, but the lan appears disabled and a recursing error message is reported. Also the bluetooth is not working. Despite that and of the low amount of ram, the system runs surprisingly smoothly if you avoid opening heavy applications ( even firefox can run, but opening a second windowd can freeze the box). I've also been able to install Arduino-IDE and it works, the driver for CH340 nano compatible board are already installed, and I've b…

I was unable to get Armbian_community_24.11.0-trunk.66_Aml-s9xx-box_bookworm_current_6.6.47_minimal to boot on my TV-Box (X96Max+ 100 vA 4GBRAM). I tried using the meson-sm1-x96-air.dtb because this is the model I use for Coreelec. This did not boot at all, the system just boots to Android (Slimbox). I also tried this image “Devmfc_Debian-Bookworm_6.6.49-meson64_Minimal-24.09.05.img” from this project: https://github.com/devmfc/debian-on-amlogic This image at least tried to boot. I got a blue screen and a stuck boot loop. Back to Armbian, I tried copying the Devmfc file “meson-sm1-x96aira100.dtb” from the into the Armbian boot folder an…

Hello I get an error when I want to install armbian t9 my device. I read all the instruction and did it correctly. I didn't install any other custom firmwares to it I just run coreelec on sd card. nothing has written to emmc at all. please help me what is the problem and how to solve it.

when excute : ./compile.sh x x odroidc4 Amlogic S905X3 quad core 4GB RAM SoC eMMC GBE USB3 SPI xx x ============================================================================================================ report an error： [ error ] ERROR in function source [ main.sh:241 ] [ error ] No board selected [ o.k. ] Process terminated How do I need to compile it? Does anyone know? pls advise。

On x96max+ with sm1-sei610-2 (from dgm78) hdmi sound works perfectly(sd card). However, after installing to emmc i have got dummy output.If i boot from sd card-i get sound from hdmi. dmesg(emmc) [ 15.702435] fe.dai-link-0: ASoC: no backend DAIs enabled for fe.dai-link-0 [ 15.702501] fe.dai-link-0: ASoC: no backend DAIs enabled for fe.dai-link-0 [ 15.703137] fe.dai-link-0: ASoC: no backend DAIs enabled for fe.dai-link-0 [ 15.703793] fe.dai-link-0: ASoC: no backend DAIs enabled for fe.dai-link-0 [ 15.705342] fe.dai-link-0: ASoC: no backend DAIs enabled for fe.dai-link-0 [ 15.705563] fe.dai-link-0: ASoC: no backend DAIs enabled for fe.dai-link-0 […

Hi all, I just managed to install Armbian to my Minix Neo U1 on sd card. I read the faq and found that installing on eMMC is better than on sd card because eMMC is faster and more durable. Now I'm curious that if I'm booting from eMMC: 1. How can I boot from sd card again? Just in case something's wrong with the eMMC etc. 2. Can I still use a blank sd card for storage? Or there shouldn't be an sd card attached because it will try to boot from sd card? Thank you

Hello all, After installing armbian, it was given the ip 192.168.1.16 by my router's dhcp. I changed the ip address using armbian-config to 192.168.1.88 Now it has 2 ip addresses and I can access both of them. How can I remove one from dhcp? Thank you

Hi, anybory know The STV-2000 Aquário tvbox? It's brazilian make, It a gxl-s905w-p281board, this old product, but can install armbian in interna memory? Thanks

IMG_1056.pdf

I recently got this tv box emulator thing but i now emulate games on my laptop for convineince. I decide to download armbian on the tv box so that i can set up pi-hole for network wide ad blocking. Ive tried multiple times but i cant see to get it working. Cpu: Amologic S905L Ram:2 gig DDr3 ive been downloading this version https://github.com/ophub/amlogic-s9xxx-armbian/releases/download/Armbian_jammy_arm64_server_2026.02/Armbian_26.02.0_amlogic_s905l_jammy_6.1.161_server_2026.02.02.img.gz been using this dtb meson-gxl-s905x-p212.dtb been using this u bootfile named: u-boot-s905x-s912 To reboot the system there is no button in…

Hello everyone, I read a lot of threads regarding my problem but couldn't find the solution. Could someone kindly help me? I have a TVbox with S905x and Android installed, I would like to install armbian, I downloaded the ISO, renamed the u-boot file for S905x to u-boot.ext and modified the file "/extlinux/extlinux.conf" leaving only the line without comment with S905x. When I do "update" from Android it makes me choose a .zip file, copy something and then reboot. Unfortunately, however, the system restarts with Android as if nothing had happened. What am I wrong? Thank you very much.

Guys, I installed "Armbian_23.08.0_amlogic_s905x2_lunar_5.15.133_server_2023.10.02.img.gz" on SD card and entered into TESLA MediaTech X700 with soc s905x2 in it. It boots flawlessly, I have created user name etc ... I am trying to install xone driver. https://github.com/medusalix/xone When I hit the "sudo ./install.sh --release" command, I got warning that my gcc is different the one that was used for kernel compilation. I belive that is the issue of not compiling the code. Why is it different ? What can I do in order to match it ? Here are details of the commnad: Installing xone v0.3-2-gbbf0dcc... Sign comma…

Hi guys, I have a generic tv box from a local Internet Provider in my country. They called it Fiberhome HG860p. This TV box is powered by Amlogic S905X and has eMMC installed with Android TV 6. I can ran armbian server with micro sd card on this box, is it possible to copy, browse or delete eMMC files via armbian server? If possible, what is the command or is there an app like file manager to do it? Thanks in advance.

Hi everyone i have wanted to do something wiht my useless tvbox and wanted to turn it into ubuntu pc and followed the guides to do so butit doesnt want to boot the img file how do i do this???

I've spent the last couple of months playing around (low-end testing just to see what the software and I are capable of) with Debian and docker: RSS, Nextcloud, navidrome, immich, nothing earth-shattering. I was doing this in a VM so I could wipe and restart in case of failure/learning curve issues, which was great. Everybody's got to have a hobby, right? After much foibles, I had gotten the setup into something I liked and understood the pratfalls to expect in installation. Ready for primetime, I didn't want to leave this in the VM (I have constant paranoia about usage on my power-sucking desktop), but I have a T95 Max plus TV box sitting around doing nothing but K…

Hi All, This is my first post. First of all let me thanks all the ones are hard working on this project. I have installed Armbian Buster on my Bqeel Y4 Max (S905x2) and I have managed to fix some little issues although the wired connection still not work. However, at the moment I'm trying to understand why Armbian sees only 2GB of RAM instead of 4GB. I have search google and the forum and, if I'm not wrong, the issue is in the boot file. I noticed someone has fixed it by installing the latest Ubuntu image, but I'm wondering if would be possible to get the 4GB without re-installing everything. I have inc…

Hello everyone! I am running Armbian in a BTV11 box (Amlogic S905X3) alongside the "meson-sm1-sei610.dtb". My cabled ethernet connection is working fine but not WIFI. No networks are found. I have already tried alternatives like meson-sm1-sei610-ethfix.dtb, that leads to my ethernet to also stop working. At first the Kernel was looking for `brcmfmac4330-sdio.seirobotics,sei610.bin` firmware, that doesnt exist in Armbian. So I made a symlink pointing to a generic `brcmfmac4330-sdio.bin`. Saw that similar fixes worked for other people. This is what I see from logs: `sudo dmesg`: [ 8.451121] brcmfmac: F1 signature read @0x18000000=0x16044330 [ …

I had an error when installing armbian on my M96H androidtv S950L3. Anyone any idea to resolve this?

Has anyone been able to use the remote control that comes with the tv bos under Armbian? Does it reqire additional driver(s)? I want to run Kodi (or any better mediacenter) under Armbian.

Hi I'm completely new to Armbian and Linux however would like to revive an old Android TV Box I own (Mygica 1900 Pro - https://www.mygica.com/product/atv1900-pro/) for the following purposes: 1. Use as HomeBridge server for Apple Homekit 2. Setup SMB file server to stream TV / Movies on LAN 3. Setup headless Torrent and Usenet servers I understand the general principles that I need an Armbian image that matches board hardware but I get lost in trying to figure out if my board will work and if so what image to download? Perhaps if I can't figure that out all the things I want to do with it might be a stretch LOL! Anyhow I've at…

Hello, I have some troubles with this TVBOX: it runs armbian and other distros correctly, using the meson-gxm-t95z-plus.dtb but sometimes wifi goes into kernel panic at boot, and when it does, the whole system becomes unstable (i.e. not rebooting, eth0 hangs...). I have extracted the original .DTB from the only firmware that exists for this box, the ancient 6.0 Marshmellow Android (I guess it's a 3.x kernel...). I attach it to this message hoping someone more expert than me can help in making it work ina more stable manner. I attach a picture of the board also, it reads "M8S". Box has 2GB ram and 16GB eMMC, brcmfmac wifi/bt and ZTE PHY chip. …

Hi, this is my first post so please be generous. After much experimentation I have managed to to set up Armbian on an old Zidoo x5 box. I may add that neither the .zip or the toothpick method worked for me but finally got the booting sequence to run the S905 Autoscript by altering some variables using the setenv command through the serial interface. I have installed several OS's and finally settled on the 20.10 focal 5.9.0 desktop image. Most things work but I am getting problems with setting up an Access Point through the armbian-config program. I have left the default settings as proposed and was able to "see" the hot spot…

I have an old MXQ Pro 4K (based on the original S905, not S905X or S905D, the original S905) which I tried to install armbian on, but I didn't know extra things were needed to set up uboot and dtb correctly, so I just flashed the image, put the SD card in my box, ran `reboot update` from Android to boot to the SD card, it showed the MXQ Pro logo, rebooted, went back to the MXQ Pro logo, and I can't get it to go past that. My box has a weird firmware issue (started immediately after a firmware restore so I don't think it's hardware damage) where the button in the headphone jack just... doesn't work, even when holding it, it still tries to boot to the eMMC, and now I have n…

Hello In the past I installed armbian into emmc (a95xf3-air) with a USB key. All was ok. Now I would like to do a fresh install with the current release : I burned the image, make the changes (extlinux …) Boot with the "toothpick" method, ssh , the armbian release is the old one from the emmc, not the recent from the key. How is it possible to boot with the recent one with ssh (no display no keyboard) ? And after copy the new release to emmc. Thanks for help

Hi everyone, I'm trying to boot Armbian on a TiVo Stream 4K (Model: IPA1114HDW, Board: SEI500BS/Pyxis, SoC: S905X2, Android TV 10). I've flashed S905X2-compatible images (like Armbian_23.02.2...6.1.11) using Rufus/Etcher/Armbian Imager with different DTBs, but I cannot get it to boot from SD or USB. Toothpick method (short press): Enters Fastboot (limited permissions, no flash/dump). Toothpick method (long press): Enters USB Burning Mode. adb reboot bootloader and adb reboot recovery work, but there is no root access via ADB. It seems external boot is disabled, U-Boot is locked, or secure boot is enforced. My next step is hooking up a UART USB-TTL…

Hi, I’ve installed Armbian to my Vero4k+ and all works fine except wired ethernet, the thing is it kind of works, but when I use different dtb files: meson-gxl-s905d-vero4k-plus.dtb wifi works, bluetooth works eth doesn’t, eth0 interface is UP but can’t get IP or set one, meson-gxl-s905d-p230.dtb wifi works, bluetooth doesn’t, eth generally works but when testing with iperf3 in server mode it’s great cca 930mbps 0 errors, but in client mode it depends of OS (ubuntu or debian) and kernel (5 or 6) used from 1-350mbps but with looooot of errors (cca. 67000 for 10 sec test) and if I limit link speed to 100mbps it doesn’t change much, also lot of errors, if…

I have an MXIII 4k box with armbian 5.44 ubuntu server running on it. Is there a way I can power the box on when applying 5V to it rather than pushing the power button? The project I am working on will restrict access to the box and it will be powered over eithernet.

I fried SOIC-8 IC (Probably power management) on H96 Max X2 PCB (I-BOX TV) by applying 12V If anyone (@Thang?) has a board like that, please take a close up of that chip on the back side. I might be able to source it and replace it. Original related topic by Thang is here. BTW, there is native console available on pretty much all Armbian boards, that lets you see linux messages before they appear on the HDMI port. It helps to understand the bootloader sequence, u-boot sequence and gives you root access.

woohoo I got one of my boxes back from the dead lol FYI I used the AML flash tool from here https://github.com/osmc/aml-flash-tool what's the latest armbian I can install on this? I used balbes builds like eons ago but I don't think he supports them anymore thanks

Hello! I have no video output on Nexbox A95 (s905x) after boot (I can see the screen during boot up process), on the Armbian desktop build. Is there any solutions that I can implement to solve this?

hi gusy, i have a question. I have an android tv box mecool m8s pro L, I have installed it with armbian linux 5.90 20.10 desktop environment, using dtb meson gxm q201. it's working and can use the internet via LAN cable, but the problem is the wifi doesn't work, the wifi chipset is KM63350510, is there a linux driver for my wifi chipset?

Hello , I have an HK1 box Chipset: S905X3 running Armbian, I noticed that the box contains 2 LEDs (Blue and Red). Is it possible to do PWM with one of the outputs of one of the LEDs?

I've created a new Linux image for the MyGica ATV 495X TV box, based on a Focal CLI image from ophub's github repo. The image includes a 5.10 kernel with HDMI, SD, eMMC, USB, Sound (HDMI+AV), Ethernet and WIFI all working. The image supports installing to the internal eMMC with or with the vendor u-boot. It is available at https://github.com/deonvdw/atvlinux/releases/tag/ATV495X-v1.00.

Hello all, did any body able to login to Cinnamon version (screen shot below from here ) ? The box is A95X F3 Air first edition. For me it Bootes well and after root and user passwords are set it shows up desktop login screen and then after user login the desktop simply goes blank. On reboot again user login screen appears on the desktop but again blank screen after login. On the other hand the Armbian 24.8.0-trunk.399 Bookworm Gnome worked fine. I don't want any troubleshooting or run through logs and spend time on this but if any body faced such issue before just reply back if this happened with your box as well.

Hello everyone, I tried to erased data from settings menu to start fresh again and prepare this old box not used to give it to another family member. Probleme is that the process reset to factory was shut down before it ended (was taking ages).. So now it doesn't boot properly. I tried to operate wipe data / reset factory in recovery mode but ended in an error (mount failed). Also now i don't have operational remote.. 1)How to reset it properly ? 2)Is there any software to do that ? (i downloaded Aml_burn_tool recently but need help with which image should i load ? 3) Is there any way to force the box to boot …

Hello All, I apologize if this subject is already located somewhere in the forum's threads, I spent some time looking and I could not find it. I am seriously an amateur with Armbian. I have an x96 mini, first generation possibly, 1GB RAM 8GB Storage. I wanted to use it to create a linux process that would be running 24/7. The focal image that was release a while ago and was linked on one of the yandex drives works fine, from usb. When I install using install-aml.sh and then try to boot it, it attempts to look for a network, at least that is what appears to do. I don't want this unit accessing the network just yet. Is there a…

I have an M8 S802 box that I am trying to install armbian to. I am using 5,44 Ubuntu bionib 3.10.108 server. I can boot with the SD card, but when I try to install to emmc I get a message saying cannot parse config file '/etc/fw_env.config' invalid argument at the end of install. After this, the TV box will only boot from SD. I tried copying the fw_env.config file from my backup of android, but I still get the same results.

Hey all! I hope i can find here some help for my problem.. Beelink GT1 (Amlogic S912) Debian GNU/Linux 11 (bullseye) with Linux 5.9.0-arm-64 Installed from this file: "Armbian_20.10_Arm-64_bullseye_current_5.9.0_desktop.img" Moved everything to emmc xorgxrdp version (1:0.2.12-1). xrdp version (0.9.12-1.1). Enabled RDP in armbian-config, tried editing startwm.sh in /etc/xrdp/ ... While trying to connect with RDP from Windows or MAC, the screen looks like that: rdp glitch (Same on windows) (desktop via hdmi works great) Any suggestions? 🤔

I manage to build and make working latest Armbian and mainline kernel with the Sunvell T95Z Plus Amlogic S912 TV box. See: https://github.com/debiangamer/build/releases/tag/v2021.05