Beginners

I can't seem to get apt-get update to work, this is a fresh install anyone know the fix? mango@nezha:~$ sudo apt-get update Hit:3 http://ports.ubuntu.com jammy InRelease Hit:4 http://ports.ubuntu.com jammy-security InRelease Hit:5 http://ppa.launchpadcontent.net/oibaf/graphics-drivers/ubuntu jammy InRelease Hit:6 http://ports.ubuntu.com jammy-updates InRelease Hit:7 http://ports.ubuntu.com jammy-backports InRelease Hit:1 https://paulcarroty.gitlab.io/vscodium-deb-rpm-repo/debs vscodium InRelease Hit:2 https://cli.github.com/packages stable InRelease Err:2 https://cli.github.com/packages stable InRelease The following signatures couldn't be verified because th…

Armbian implements some basic 'system logging' at every startup and shutdown and contains a little utility to provide this collected information combined with some more useful debug info from user installations. All that's needed is executing 'sudo armbianmonitor -u' (or armbian-config --> Software --> Diagnostics) and then all this support related information is uploaded to an online pasteboard service automagically (see example output) How to interpret this wall of text? The output is best read from bottom to top since the most important information is collected during upload: At the bottom /proc/interrupts contents to chec…

This tutorial is based on my knowledge and experience in testing Tinkerboard. It has not been tested on other devices and I do not take any responsibility nor am I liable for any damage that may be caused through the use of this tutorial. Debian / XFCE minimal desktop Download the latest current version of Bullseye (Panfrost drivers included) for your device and follow the instructions https://www.armbian.com/download/ After the first login type ... exit (exit from root, login with your new user id) sudo apt update sudo apt upgrade (if the kernel installation prompts for modifications, just say Yes or Ok) sudo apt install task-xf…

Hi! Currently try to figure out how to run my freshly builded Armbian using QEMU arm64. According to this tutorial: https://docs.armbian.com/Developer-Guide_Build-Preparation/ I prepare clean Jammy VM. Build using this CMD: ./compile.sh BOARD=qemu-uboot-arm64 BRANCH=current RELEASE=bookworm Build process was going smoothly i pick up two files from output folder: 1) Armbian-unofficial_24.5.0-trunk_Qemu-uboot-arm64_bookworm_current_6.6.29_minimal.img.qcow2 2) Armbian-unofficial_24.5.0-trunk_Qemu-uboot-arm64_bookworm_current_6.6.29_minimal.u-boot.bin Currently boot up process stucked, i can run U-boot and mount qcow2 ima…

I've taken peeks at threads related to hardware decoding (of H.264 and HEVC, mainly) on Allwinner and Rockchip platforms on and off, sometimes dabbled in trying and failing to implement solutions recommended there. Being a complete amateur, I find the topic very opaque and confusing, with various different components that need to interface with each other, be patched in sync, and sometimes change drastically between kernel versions, etc. Today I sat down and read up on these subjects, scouring wikis, documentation, this forum, and assorted other sources to try and understand how this works. In this post I will attempt to compile what I've learned on the different software…

Hi there, I have been using Ubuntu stock from Hardkernel but it is worse than a kick upon my jewels... As usual only Armbian is the way to go, however I personally dislike Ubuntu therefore I'd like to go with Debian but I didn't get the difference between CLI and Minimal. Can anyone advise me? Thanks in advance, F.

Hi forum members, I enabled the 1w protocol via armbian.config and found, that the default GPIO pin assignment is set to 110 (what is PD14) root@bananapim2zero:/sys/bus/w1/devices# cat /sys/kernel/debug/gpio gpiochip0: GPIOs 0-223, parent: platform/1c20800.pinctrl, 1c20800.pinctrl: gpio-110 ( |onewire@0 ) out lo - - - dmesg | grep -E 'w1|wire' | grep -E 'Driver|gpio-' [ 5.659452] Driver for 1-wire Dallas network protocol. [ 6.408704] gpio-110 (onewire@0): enforced open drain please flag it properly in DT/ACPI DSDT/board file Please can someone tell me what phyical pin is this gpio-110 on my BPI m2 z…

I'm having trouble running a program this error when running the program: -bash: ./program: cannot execute binary file: Exec format error And I checked the file, it turns out that the error is on the machine type, the program requires an x86-64 machine, while my armbian linux machine is aarch64 When I check with this program file command the result is: : ELF 64-bit LSB shared object, x86-64, version 1 (SYSV), dynamically linked, interpreter /lib64/ld-linux-x86-64.so.2, for GNU/Linux 2.6.32, BuildID[sha1] =c67539ec4f37bbb5d61546fade0a8b7bf2ee4659, stripped And here are my server specs: Linux localhost 5.1.0-rc1-aml-s905 #5.84…

hi im newbie here, i have small question ,sorry if so simple or silly. im confused about size block on armbian system (default system archive) if a make df , the system says 1 kb . Filesystem 1K-blocks Used Available Use% Mounted on tmpfs 102300 7152 95148 7% /run /dev/mmcblk0p1 59601388 1120660 57840424 2% / tmpfs 511492 0 511492 0% /dev/shm tmpfs 5120 4 5116 1% /run/lock tmpfs 511492 0 511492 0% /tmp /dev/zram1 47960 7412 36964 17% /var/log tmpfs 102296 0 102296 0% /run/user/1000 but, if im …

I’m running Armbian 20.05.7 stable on an Odroid HC2 (XU4). I installed Docker Compose using the instrux found in the Linux section of the Docker install page. I’m logged in as root via SSH. I run the curl command (which I literally copied/pasted from the docs install page) curl -L "https://github.com/docker/compose/releases/download/1.26.2/docker-compose-$(uname -s)-$(uname -m)" -o /usr/local/bin/docker-compose then chmod +x /usr/local/bin/docker-compose and I check it with which docker-compose which returns: /usr/local/bin/docker-compose When I try to test the installation… docker-compose --version it returns: bash: /usr/b…

hello dear all, i am running Armbian on a Banana Pi for more than one month - all goes well No i wanted to do some checks - and i wanted to check the version of the kernel on bash - with /etc/armbian-version but this is only accessible when logged in as superuser At the moment i do not remember the credentials for the super user so i enter su and then a passwd - but i get back "Authentification failure" BTW: with password 1234 i do not succeed. question: What can i do now!?

I don't know precisely when, but in Ubuntu_xenial_next_desktop.7z "chromium-browser --start-maximized" does not start the browser maximized. In previous versions of armbian it works properly. I tested chromium 61.0.3163.79 (same version that is on Ubuntu_xenial_next_desktop.7z) on my kde neon system and it works.

I have a brand new install of Armbian 20.05.4 trying sudo armbian-config to enable overlayroot and getting sed: can't read /etc/overlayroot.conf: No such file or directory is that a feature of a bug? would touch /etc/overlayroot.conf be a proper work around or is something more expected of me to enable overlayroot?

Anyone know if this is available? Apparently the Ubiquiti Unifi Controller software only works on Raspberry Pi Raspian because they have this so-called "Hard-float" version of Oracle Java. I'd rather use one of my C2s for the job but haven't had a chance to look into getting an official Oracle Java JDK installed yet. Thanks!

Orange Pi PC+ I have been using an image generated in 2019 (based on Debian 9) to develop code for a project. On the development machine it works well. I moved it to a machine running a custom Armbian build (simply having removed drivers that weren't necessary - sound etc. - and requiring that u-boot not search USB devices before starting the kernel) that was based on the same version (reported as Debian 9). It worked as expected. No probalme there then. Yesterday I rebuilt the Armbian image (now based on Debian 9.12), loaded it on to the client machine and went to run the software. I now get the error; "Inconsistency detected by ld.so: dl-version.c: 224: …

Hello everyone, I encountered a "No space left on device (28)" issue while compiling custom firmware and would like to seek your help. The firmware compilation process works fine under normal circumstances. However, after using the customize-image.sh script to install my own applications, the rootfs size became 3285 MiB, and I encountered the "No space left on device (28)" error during compilation. I modified FIXED_IMAGE_SIZE to 6G and recompiled, but the same issue persisted. After mounting the raw file, I confirmed that no additional files could be added. I suspect there’s some parameter restricting this, but I’m not sure…

Hi! In armbian-config there's a choice to move system files from SD to HDD (or some other media). Is there a possibility to "revert" that - so that after "the action" the system would be read from the SD card again? Thanks for all your time and best wishes, Damjan

Hi, I'm trying to build an image on Windows. But when running compile.sh, I get the following error: [💲|💥] Problem detected [ WSL2 Terminal does not support UTF-8 ] Full log: https://paste.armbian.com/zopitumatu I don't know why this is happening, I've tried both cmd, powershell 5, powershell 7, all with the same result. The log mentions the Windows Terminal in the Microsoft Store should support it, but that already is installed and seems to just open the same Powershell 5, with the same error. Any idea on how to fix this?

I have the same problem. Using Lubuntu 14.04- 0.9.1 img for Orange pi lite. bin2fex in sunxi tools gave me "malformed data" error. using the windows bin2fex gave me "unrecognized GPIO port #12". Since this bin2fex is so critical in setting display, audio, resolution, etc. This bug made my ARM experience very bad. I understand and appreciate all the efforts in the linux community though.

Armbianmonitor: http://ix.io/3vLl I try to use FFmpeg with cedrus264 but failed. Error is: sudo ffmpeg-3.1.4 -f v4l2 -channel 0 -video_size 1280x720 -i /dev/video0 -pix_fmt nv12 -r 22 -qp 30 -c:v cedrus264 -c:a None night_video_test4_1920x1080.mp4 [sudo] password for lam: ffmpeg version 3.1.4 Copyright (c) 2000-2016 the FFmpeg developers built with gcc 4.8 (Ubuntu/Linaro 4.8.4-2ubuntu1~14.04.3) configuration: --prefix=/usr --enable-nonfree --enable-gpl --enable-version3 --enable-vdpau --enable-libx264 --enable-libmp3lame --enable-libpulse --enable-libv4l2 --enable-libcedrus264 libavutil 55. 28.100 / 55. 28.100 libavcodec 57. 48.101 / 57. 48.101 …

Hi. I have a freshly installer Jammy (XFCe) version installed on a Pinebook Pro and after the install run one single update. sudo apt update sudo apt upgrade As part of that upgrade a message appeared to inform me that the existing firefox installion will be replaced by a snap version, apparently standard in Ubuntu now. The installation did not show any errors but if I want to start firefox in the snap version now I get this error: mmw@pinebook-pro:~$ firefox & [1] 3726 mmw@pinebook-pro:~$ /user.slice/user-1000.slice/session-c2.scope is not a snap cgroup As this is all still almost out of the box, is the…

So I had my OPi Zero 2 running Sonarr and Emby with a mounted shared folder, I have a HDD connected to a USB3.0 router with trasmission on it working great, but all of a sudden 3 days ago it didn't boot, don't know why, yesterday installed bookworm on another sd card, trying to mount my shared folder is giving me the error mentioned on title: dolphinus@orangepizero2:~$ dolphinus@orangepizero2:~$ sudo mount -t cifs //192.168.2.2/Descargas /home/dolphinus/Descargas Password for root@//192.168.2.2/Descargas: mount error(22): Invalid argument Refer to the mount.cifs(8) manual page (e.g. man mount.cifs) and kernel log messages (dmesg) It asks me for a passw…

Hi, I would suggest that in Armbian use Webmin as default. - easy interface - very easy to check the status of Armbiana - easy to install basic services, eg. Ftp, samba There are many questions on the forum related to the different installations, using this program is much easier. How to install (Orange Pi PC ): (Webmin updates itself to the latest version - notification appears) sudo apt-get install -y perl libnet-ssleay-perl openssl libauthen-pam-perl libpam-runtime libio-pty-perl apt-show-versions python sudo wget http://prdownloads.sourceforge.net/webadmin/webmin_1.831_all.deb sudo dpkg --install webmin_1.831_all.deb access: (ignore https warni…

Hello Armbian, how does kernel update procedure work? There is the script [1] that indicates that kernel was updated. Is that updating procedure automatic? When does that happen? Has it user under the control? Many thanks for clarification. Rostislav [1] https://github.com/armbian/build/blob/master/packages/bsp/common/etc/profile.d/armbian-check-first-login-reboot.sh

Hello, Since I upgraded my Odroid N2+ to Armbian 23.11, when connecting to SSH, I can read the following: Welcome to Armbian 23.11.1 Buster with Linux 6.1.63-current-meson64 No end-user support: community creations & unsupported (buster) userspace! Since 23.08 I had the first part about only community creation, which I already did not understand but now it looks worse as it also mention Buster when I use Bookworm. What can cause this strange information? And what can I try to solve this?

Hi, Do you know what may cause dmesg showing full wall of this error: . . . [77666.669616] rockchip-i2s ff890000.i2s: Fail to set mclk -22 [77666.669642] rockchip-i2s ff890000.i2s: ASoC: error at snd_soc_dai_set_sysclk on ff890000.i2s: -22 [77666.671123] rockchip-i2s ff8a0000.i2s: Fail to set mclk -22 [77666.671149] rockchip-i2s ff8a0000.i2s: ASoC: error at snd_soc_dai_set_sysclk on ff8a0000.i2s: -22 . . . This error occurs every time I run java, but also in some other programs. board: pine64 rockpro64 os: armbian ubuntu focal based image, but i deleted graphical environement and some other programs like libreoffice

Xupdate: includes updated mesa libraries for mali GPUs. how to use: add below to you source.list gpg key can be found at: after that, run `sudo apt update && sudo apt upgrade` before reboot, please update your xorg.conf, follow below webpage:

Hello, Ihave an Odroid N2 that run with armbian. 1) I can't upgrade armbian-zsh_21.08.6_all.deb The output of apt upgrade is : (Lecture de la base de données... 133099 fichiers et répertoires déjà installés.) Préparation du dépaquetage de .../armbian-zsh_21.08.6_all.deb ... Dépaquetage de armbian-zsh (21.08.6) sur (21.08.5) ... dpkg: erreur de traitement de l'archive /var/cache/apt/archives/armbian-zsh_21.08.6_all.deb (--unpack) : impossible d'ouvrir « /etc/oh-my-zsh/plugins/osx/README.md.dpkg-new »: Aucun fichier ou dossier de ce type Des erreurs ont été rencontrées pendant l'exécution : /var/cache/apt/archives/arm…

Hi, I am working on a PR[0] to the Armbian build framework. As suggested in the PR, I am trying to use the upstream U-Boot source and apply the required patches[1][2] on top of it. One of the patch series[2] requires a git subtree[3] to be added to the U-Boot source before applying the patch itself. However, it seems that Armbian's build framework first attempts to apply the required patches[4] on the U-Boot source and then calls the pre_config_uboot_target hook[5]. Currently, I've put the code to add the git subtree in the pre_config_uboot_target hook. As a result, the required patch series are not getting applied. Is there any way in which we can co…

Hi all, I use orange pi one + armbian + wavesahe 7 inch display. I got a problem with Touchscreen does not work. I look Waveshare used goodix gt811 touch controller, so when i check on the kernel /lib/module the driver not exist, only gt9x and gt82x. And then i check release log linux kernel, goodix gt811 just present start from kernel 3.5 while armbian is 3.4.x. So, how to make the Touchscreen to work? Thanks.

hi. i am new to armbian and i want to start learning python i use below tutorial but it does't work https://youtu.be/D_N2K2fTH2M any body have other reference for me to install python 3.7.0? i am using orange pi pc. thanks.

I'm using Banana Pi M2 Zero with Armbian Debian GNU/Linux 10 (Buster). Compiled the image myself with the latest source code using the armbin/build repository. I want to be able to do serial communication on pins 8 and 10. I'm looking for something to appear at /dev/ttyAMA0, so I can communicate with it. I saw some other forum posts which mentioned it'll happen on /dev/ttyS0 , however even that is not happening. The serial communication is working via FTDI (using the USB side connected to the Banana Pi), which indicates there is no problem with the other device. This is what the configuration looks like using "sudo minicom -s". +…

## Description After a fresh installation of Armbian for Rockchip64 (Rock 3A), the system ships with `linux-image-current-rockchip64` version **26.2.1** (kernel 6.18.8), but the corresponding `linux-headers-current-rockchip64` package for version 26.2.1 is **not available** in the public APT repositories. This prevents installation of kernel headers required for DKMS modules, out-of-tree drivers, or any kernel module compilation. ## Steps to Reproduce 1. Flash the latest Armbian image for `rock-3a` (branch: `current`) from the official download page. 2. Boot the device and connect to the network. 3. Run `apt update` with any standard mirror (e.g., `mirro…

I am testing Armbian 5.14 Debian Jessie desktop version with xfce4 on Orange Pi 2E I guess it would be useful to add "xfce4-xkb-plugin" because Armbian has non English users and switching the keyboard is not intuitive I was reading the pinned topic but already fixed the options provided by http://forum.armbian.com/index.php/topic/998-xfce-in-spanish-or-any-other-language-different-than-english/ Thanks you!

Hello all, I succeed to boot on sata usb by seting the UUID of the armbian_root from mmcblk1p1 to sda1 I tested several M2 SSD enclosures both NVME and NGFF most of the time, one in the middle, has a USB Hub and micro SDCARD port. Now if the USB enclosures is not connected, we are stuck in initramfs stage because the UIID partition given in /boot/ArmbianEnv.txt does not exist. I changed the UUID of emmc armbian_root (mmcblk1p1) thinking it would be overmapped with partition of S2 usb enclosure (sda1). It is not the case, it will only boot on emmc , ignoring S2 enclosures when mmcblk1p1 and sda1 shares the same UUID. …

Posting this because I want to share the solution. Got this error when trying to cmake OpenCV : -- Found PNG: /usr/lib/arm-linux-gnueabihf/libpng.so (found version "1.2.50") -- Looking for /usr/include/libpng/png.h -- Looking for /usr/include/libpng/png.h - found -- Found OpenEXR: /usr/lib/arm-linux-gnueabihf/libIlmImf.so CMake Error at /usr/lib/arm-linux-gnueabihf/cmake/Qt5OpenGL/Qt5OpenGLConfig.cmake:27 (message): The imported target "Qt5::OpenGL" references the file "/usr/lib/arm-linux-gnueabihf/libQt5OpenGL.so.5.3.2" but this file does not exist. Possible reasons include: * The file was deleted, renamed, or moved to another locat…

After installing Armbian_23.2.1_Rock-5b_bookworm_legacy_5.10.160_xfce_desktop.img I found a nagging error each start of Firefox. "Failed to read the configuration file. Please contact your system administrator." Looking at internet with Google I found hardly any link referring to linux or armbian, therefore I still don't know which configuration file was actually missing or damaged. The only link I found with armbian in it contained some very obscure editting of some configuration files (just like many proposed Windows solutions). The issue: where does it go wrong? The problem is some configuration clutter somewhere in /usr/lib/firef…

Current kernel: Linux rock-5b 6.1.43-vendor-rk35xx #1 SMP Mon Mar 18 05:06:52 UTC 2024 aarch64 GNU/Linux Symptoms: $ lspci .. 0002:20:00.0 PCI bridge: Rockchip Electronics Co., Ltd RK3588 (rev 01) 0002:21:00.0 Network controller: Intel Corporation Wi-Fi 6 AX210/AX211/AX411 160MHz (rev 1a) 0004:40:00.0 PCI bridge: Rockchip Electronics Co., Ltd RK3588 (rev 01) 0004:41:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8125 2.5GbE Controller (rev 05) And after a reboot I find with dmesg: # modprobe iwlwifi modprobe: ERROR: could not insert 'iwlwifi': Exec format error root@rock-5b:~# dmesg|grep -E -A 3 -B 3 "intel|iwl" [ 6.285747] input_leds: disa…

Currently the only way to get a working GC2035 camera at Orange PI PC Plus, is to 1) install Armbian 5.20 or 5.23 ( 5.24 / 5.25 and anything newer is known not to work) 2) then you need to carefully apt-get update / apt-get upgrade and hope it doesnt break However, there is a huge problem: Armbian 5.20 and 5.23 images are not available now They should have been available at these links: Armbian 5.20 - https://dl.armbian.com/orangepipcplus/archive/Armbian_5.20_Orangepipcplus_Debian_jessie_default_3.4.112.7z Armbian 5.23 - https://dl.armbian.com/orangepipcplus/archive/Armbian_5.23_Orangepipcplus_Debian_jessie_default_3.4.112.7z …

Hello everyone, I would like to know which version of Armbian is recommended to install today to have a stable system ? Indeed, I have reset all my data on my Helios64 and I want perform a fresh install. I do not made any hardware change on my Helios64 and I plan to use OMV6. Thanks all for advices Flolm

Hello, guys! I would appreciate so much if you could help me develop my project. English isn't my native language(but I can understand very well) and I'm a beginner on Linux world. But I've made some progress so far and I'm really focused on that. I have been searching a lot for more than 20 days about the topics below but I'm really struggling with some issues. MY SETUP: -MXQ PRO 4K- Rockchip RK3228A - Nand Flash 1GB -Armbian_22.02.0-trunk_Rk322x box_focal_legacy_4.4.194_xfce_desktop.img GOAL: -Displaying in full screen my PDF lyrics on stage and switch the pages using a footswitch. GOALS ALREADY REACHED: -Installed Armb…

Hi, I'm looking for something similar to wkhtmltopdf for ARM but I do not find anything, install wkhtmltopdf but I get an error when I run it (ERROR CODE) I installed xvfb and when I run it sometimes it does it gets stuck and then he turn off the orangepi if you know why happens this i will be pending to the comments or if someone has something similar to wkhtmltopdf for arm I would appreciate it to tell me. ERROR CODE QXcbConnection: Could not connect to display Aborted

Description: Hello everyone, I am encountering an issue where kernel configuration changes do not take effect when building an image for the Rock 5B using the Armbian Build system. Environment: Board: Rock 5B Kernel: Vendor Release: Noble Build Mode: Mini Build Tag/Branch: v25.11 Specific Issue: To ensure compatibility with Redroid containers, I need to change the kernel's CONFIG_ARM64_VA_BITS from the default 48-bit to 39-bit. What I have tried: I have attempted the following three methods, but none have worked: Ran the kernel configuration tool to change CONFIG_ARM64_VA_BITS, then copied th…

Hi everyone viewing this post, here is the situation. I think I have configured my hostapd correctly, but I cannot find the ssid(I haven't hidden it), and I cannot even join mannualy. there is no fatal error in the log so I don't know what to do. PLEASE HELP. THANK ALL OF YOU VERY MUCH. -----here is the log----- Spoiler random: Trying to read entropy from /dev/random Configuration file: /etc/hostapd.conf ctrl_interface_group=0 nl80211: Could not add multicast membership for vendor events: -2 (No such file or directory) nl80211: TDLS supported nl80211: Supported cipher 00-0f-ac:1 nl80211: Supported cipher 00-0f-ac:5 nl8021…

before you start: Armbian already provides kernel build script in armbian build framework, and you can download these packages via `apt` in common cases, you shouldn't build kernel yourself, even you want to build a customer kernel package, you should use armbian build framework. because you can get best supports. so below content is only for experts. prepare source code: 1, stable linux kernel source code: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git https://kernel.googlesource.com/pub/scm/linux/kernel/git/torvalds/linux.git 2, armbian build framework, fo…

It is easy to expand Orange Pi Lite 2 adding missing analog audio. As described at Orange Pi Lite 2 schematics: TP23 LINEOUTL TP24 LINEOUTR

If you encounter this error install usb-modeswitch and reboot. sudo apt install usb-modeswitch sudo reboot

Hello. Im trying to configure w1-gpio bus on Armbian. There are default parametrs set: /sys/bus/w1/devices/w1_bus_master w1_master_timeout = 10 w1_master_timeout_us = 0 How to change them? Is this possible or require recompilation of w1-gpio module?

Hi I got this Tvbox with H3 processor, I managed to boot using the image of the Orangepi PC. However it still needs some improvements. DISPLAY: OK ETHERNET: OK WIFI: NO BLUETOOTH: NO RAM: DETECTED ONLY 1GB of 4GB ?! WAY ?!? Used image: Armbian_21.02.3_Orangepipc_buster_current_5.10.21.img.xz How do I configure the total ram? Specs: # uname -a Linux localhost 4.4.55 #1 SMP PREEMPT Mon Aug 31 19:03:00 CST 2020 armv7l # cat /proc/cpuinfo …

Hello, I'm new to the subject but I have a problem. I have an Orange Pi 3 and i want to install a linux based system on it to mess around with it. I tried to install armbian but with the nand-install-sata script I can't install it on my eMMC memory, since armbian doesn't see i have one. The only thing it offers me is to update the bootloader on the SD card. So i went to /dev/ and my eMMC memory isn't shown there. I just have mmcblk1 witch is my SD card and mmcblk0p1 wich is my armbian partition on the SD card and nothing else. I figured this was due to the fact that maybe this version of armbian didn't support emmc memory, so I tried with the foca…

Hi I would like to install the following module: mt7601u Unfortunatly i need kernel-hearders at least for this , i think My hardware is an Orange Pi Zero HC2+ My system realease is as follow PRETTY_NAME="Armbian 21.05.2 Buster" NAME="Debian GNU/Linux" VERSION_ID="10" VERSION="10 (buster)" VERSION_CODENAME=buster ID=debian HOME_URL="https://www.debian.org/" SUPPORT_URL="https://www.debian.org/support" BUG_REPORT_URL="https://bugs.debian.org/" Any idea ?

Hi! I got this on glxgears: 111 frames in 5.0 seconds = 22.122 FPS 184 frames in 5.0 seconds = 36.786 FPS It seems to be handled in software: name of display: :0.0 display: :0 screen: 0 direct rendering: Yes Extended renderer info (GLX_MESA_query_renderer): Vendor: VMware, Inc. (0xffffffff) Device: llvmpipe (LLVM 7.0, 128 bits) (0xffffffff) Version: 18.3.6 Accelerated: no Video memory: 999MB Unified memory: no Preferred profile: core (0x1) Max core profile version: 3.3 Max compat profile version: 3.1 Max GLES1 profile version: 1.1 Max GLES[23] profile version: 3.0 OpenGL vendor string: VMware, Inc. OpenG…

Hello, No access to GPIO without root. It is necessary for Moonraker. in group grep gpio /etc/group gpio:x:1001:isp isp@3dprinter:~$ echo 10 /sys/class/gpio/export 10 /sys/class/gpio/export but isp@3dprinter:~$ ls -lL /sys/class/gpio/ total 0 -rwxrwx--- 1 root gpio 4096 сен 25 23:10 export drwxr-xr-x 3 root root 0 сен 25 23:10 gpiochip0 drwxr-xr-x 3 root root 0 сен 25 23:10 gpiochip352 -rwxrwx--- 1 root gpio 4096 сен 25 23:10 unexport and isp@3dprinter:~$ sudo cat /sys/kernel/debug/gpio gpiochip0: GPIOs 0-223, parent: platform/1c20800.pinctrl, 1c20800.pinctrl: gpio-17 ( |orangepi:red:status ) out lo …

Hello! I have a stash of OPi H3 boards and it just occurred to me that there's no way to interface them with a storage device in any decent way. What am I missing here??? I also have a lot of 100 GB SATA SSD's, and I thought to myself, wouldn't it be great if each SBC could have its own SSD. But then I realized... how the hell am I going to get any kind of decent IO? If it's not possible with SSD's connected locally, let's forget them and then think, what other storage device can I use so that my OPi boards have some respectable IO device to work with? Please tell me where the gap in my understanding is?! Thanks!

Hi forum members, since I'm playing with the use of onewire sensos, I came up with the question to use more than one GPIO-pin for the onewire protocol. Is it possible to configure multiple GPIO-pins that the output of: cat /sys/kernel/debug/gpio shows more than one onewire gpio pin ? If YES, how can I find the connected sensors under the /sys/bus/ structure? Tanks in advance wollik

Hello, I just received this watch less than 24 hours. When I receive or making call with my ticwatch 2, the other party can't hear me at all. I can hear them clearly from the speaker. I can use the watch mic for voice typing and etc hence it is not hardware problem. My phone is Galaxy Note 4 running on Android 6.0.1 My ticwatch 2 is running on tic4.13.0 intl It is a nice watch so far and I would much appreciated if someone knows how to fix this issue.

Hello, i have to update nodejs to version 14, but wenn i do curl -sL https://deb.nodesource.com/setup_14.x | sudo -E bash -sudo apt-get install -y nodejs i become this error bash: -d: Ungültige Option Aufruf: bash [Lange GNU Option] [Option] ... bash [Lange GNU Option] [Option] Script-Datei ... Lange GNU Optionen: --debug --debugger --dump-po-strings --dump-strings --help --init-file --login --noediting --noprofile --norc --posix --pretty-print --rcfile --restricted --verbose --version Shell-Optionen: -ilr…

hello dear all - good day I need a Operating-System for - Alwinner /banana Pi A 20 - Udoo Quad Makerboard Rev. D. - Orange PI Prime rev 1.0 which one to take!? btw: see the data for the UDOO - Quad Makerboard Rev. D. found the following specs Note i want to build up a NAS/ Samba server. can i do that with this UDoo quad I look forward to hear from you btw: plz keep up this great project - it rocks!

In this topic solved the problem orange H3 with tv out. Can you add this TV-out feature to the new ubuntu focal release for orange pi H2+ / H3 ?

im using hdmi and connected op lite to my tv, but there is no sound

My OTG port is not functioning

After flashing the last release (21.02.3) of Buster for Orange Pi One Plus H6 I discovered that no sound card was available. aplay - l gave: Then flashing a one year old version (20.02.1) the hdmi audio was available. But after making the updates, apt-get update , apt-get upgrade and enabling the Desktop aplay -l gives : no soundcard found. Please Help Regards https://www.fiatb.fr

Hello. I have a new Rockpi 4C. I am caming out crazy because I cannot understand some hardware issues. If I use the 5.10 kernel all hardware is working less the GPU. The images are bad and the lines swing everywhere. But the CPU is pretty cool and sometimes the heat-sink became hot, but not forever. The resolution is only the 1024 X 768!! The bluetooth, with the kernel 5.10, is perfectly working. With the magic Armbian-Config utility I installed the legacy kernel 4.4. I switched on that kernel and the GPU is perfect now and I am reading what I am writing. BUT: The bluetooth service is gone. Definitively! The USB ports are gone too!! There is only one usb port wo…

Hi, I am looking for a device that has good support for being WiFi access point and being in client (managed) mode at the same time. Which can you recommend?

Hi, Did today a kernel update...upon reboot, has no connectivity. I have lost swconfig; copied the one that comes with the sdcard/img download, it booting the switch by default, but does not allow to do much more...the reset and set operations are giving an error. What could I do?

Hello, when initially trying to set up a Router using tidos tutorial with the latest armbian version i miserably failed on the hostapd part. After some fiddling around, I decided to check /proc/net/dev and found out that the WLAN card was linked to wlan1 instead of wlan0 After changing both the interface and the hostapd.conf I still can't seem to get hostapd to working with the error: Failed to initialize interface Currently I'm using the driver from https://github.com/pvaret/rtl8192cu-fixesand my hostapd.conf file is attached. Is there any problem with my hostapd.conf or is the device used somewhere else? Thank you in advance and have a nice day.

Hi all, I cannot post to the H6 forum so I cannot reply to @renedis with the link to download the Armbian_5.88.190601_Orangepi3_Ubuntu_bionic_dev_5.1.5 file he asked. For him and other users that actually cannot run the Ubuntu image for Orange Pi 3 I uploaded in my OneDrive the working image: Armbian_5.88.190601_Orangepi3_Ubuntu_bionic_dev_5.1.5 PS: please can someone move to the Allwinner H6 forum? Thank you.

Some sort of hope? http://nanopi.io/nanopi-m3.html http://www.friendlyarm.com/index.php?route=product/product&path=69&product_id=130 Great eW

Hi, I just ordered a NEO2 that I intent to use as a Tvheadend backed. Actually will use two at different locations, the problem is with the kernel bug affecting the DVBSky S960 DVB-S2 USB tuner since a kernel commit in 4.10rc1 Luckily, this has been fixed recently, and there is a patch as well. The patch has been submitted for upstream devs LINK And LibreElec also included the patch and will be fixed (finally) in their next beta LINK I wanted to ask if it is possible to include this patch to Armbian kernel (maybe a beta or nightly) in order to make DVBSky S960 work? Many thanks!

hey Guys, at first , i has no unix skill 😉 i try to connect my printer serial without usb. i use a mks robin e3p (https://github.com/makerbase-mks/MKS-Robin-E3P/blob/master/Hardware/MKS Robin E3P V2.0_001/MKS Robin E3P V2.0_001 PIN.pdf) i would use the serial connection on the "WiFi" Port. On Orange Pi i has tryed S0 to S3 (S1 - S3 enabled at "armbian-config"). "ls /dev/serial/" are empty and i get no connection. is it generally not possible or i forget some essential? i hope someone knwo what i mean 😛 Edit for my opinion i plug it right <a href="https://ibb.co/FD5x2sH"><img …

I have a nanopi duo and i want to use it usb to communicate with my quadcopter crazyflie . But when i connecting them , duo has no response for crazyflie. crazyflie usb with computer(ubuntu16.04) Bus 002 Device 002: ID 8087:8000 Intel Corp. Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:8008 Intel Corp. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 003 Device 007: ID 0bda:b002 Realtek Semiconductor Corp. Bus 003 Device 108: ID 0483:5740 STMicroelectronics STM32F407 Bus 003 Device 104: ID 093a:2510 Pixart Imaging, Inc. Optical…

I'm gonna keep this short. I installed Omv on my Odroid HC2 via armbian-config. I messed up and now cannot get into discs or filesystems tab in Omv and cannot add new shared folder. Using a htpc script called Atomic Toolkit, I updated an app, I think nginx and by that the PHP 7.2 automatically was installed by the script. Here is the thread on Omv. I'm writing this in the hope that maybe @tkaiser or someone else may have an idea to fix this. If not, I'll start over and would like to know how I can reinstall omv. In armbian-config I tried to untick omv and continue, but this does not remove omv ..Maybe I don't have to completely remove omv…

Hi everyone! First thank you for providing this beautiful piece of software, Armbian rocks! I am running Armbian 22.02 Bullseye on my Odroid HC4. After booting I did apt update apt upgrade Next I went into armbian-config -> Software -> Headers_install So I ended up with this configuration $ uname -a Linux odroidhc4 5.10.102-meson64 #22.02.1 SMP PREEMPT Sun Feb 27 09:09:25 UTC 2022 aarch64 GNU/Linux $ apt list --installed | grep meson64 linux-dtb-current-meson64/bullseye,now 22.02.1 arm64 [installed] linux-headers-current-meson64/bullseye,now 22.02.1 arm64 [installed] linux-image-current-meson64/bullseye,now 22.02.1 arm64 […

Hi all, can anyone explain to me how the boot process of an ODROID-HC2 looks in detail, please? for example, my microSD card is /dev/mmcblk1 and it contains only one partition /dev/mmcbl1p1. Questions: a) I think the ODROID-HC2 can exclusively boot from a microSD card, is this correct? Without sdCard the boot process is not possible, right? b) where exactly sits the bootloader? is it in a certain sector of the microSD card and if so where exactly and how long? or does the ODROID-HC2 trying to read at specific addresses and if so where? c) can u-boot only process the first partition of the block device or would it be theoretica…

Hi all. After installation of transmission-daemon I got two issues. First one is "UDP Failed to set receive/send buffer". I did fix it by adding next two lines to /etc/sysctl.conf net.core.rmem_max = 16777216 net.core.wmem_max = 4194304 Second one is that RPC does not start on boot but only after manual restart of service after boot. I believe it's caused because transmission starts before network goes online. I tried to fix it by adding into /lib/systemd/system/transmission-daemon.service [unit] ... Wants=network-online.target After=network-online.target But it does not help. I did fix it by adding next two lines to /etc/rc.l…

Hi everyone, After migrating to a nvme ssd using the recommended official adapters, I've run into this issue. (Been really frustrating not been able to boot reliably, replug it until it works) Before I migrated, if I went fdisk -l it would start flashing and always show up. It's only when booting, it seems to be unable to boot/stay on most of the time. 1) I put power into pi. 2) The ssd blinks, if it stops blinking, it didn't boot. If it keeps blinking success. Is there a way to delay mounting the ssd or better debug this issue?

I am deciding for buy orange pi one board. But I want to use it for this pipe { ffmpeg -v -ss seconds -i ./video -vframes 7 -f image2pipe -vcodec bmp - | mkbitmap -x -f 3.5 -s 1 -b 1 -t 0.48 -o - | potrace --turdsize 2 --longcurve --turnpolicy black -b pdf -o pdf-file.pdf } . And I need someone that have the orange pi one that could test it and post the "fps speed" or time of process some video , 60 seconds .

Hello here, I thank you in advance for coming here. I have gotten an Orange Pi Zero 2 H616 yesterday, and I wanted to install Docker as Rootless on the ARMBian Bullseye image, but It is failing every try I do to actually bring it up. It always gives the following message in Journalctl: docker.service: Start request repeated too quickly. I just wanted to ask if anybody has actually found a way to deal with this. Alternatively, I cannot boot any kernel higher than the legacy 4.9 kernel given on the main page, all the others give no feedback when the board connects to the current. I am pretty sure I am missing something, but I found no info …

Hi all, I am using Trunk Image Hirsute(kernel 5.14) for Orange Pi Win Plus and follow below topic to compile the gstreamer: But when I am using the gst-play-1.0 --use-playbin3 --videosink="kmssink plane-properties=s,zpos=3" video.file to play the video, the whole system is hang. Then only reboot can recover the system Can you please give some suggestions? Regards, Tan

Hi, I just got my Orange Pi Zero for a Pihole. Running with a quality PSU and a SanDisk Ultra 16GB A1 card. Everything went perfectly fine, Pihole is the DNS for LAN, while my router handles WAN DNS (DNS over TLS with Cloudflare). I'm concerned a little bit about logging. What do you recommend to keep the sd card safe. I think Pihole is logging to /var/log/ whete running for less than 24 hours I have pihole.log 3MB size, with pihole.log.1 around 2MB. Is there a way to use log2ram for this or a good practice of log rotation, writing to RAM, etc? Your help is welcome!

ENG (GTranslator) Hello friends. I have an Orange Pi Zero v1.1 running perfectly with ARMbian 3.4.113 server and I connect via PUTTY SSH Client. I use the OPI to control a PRUSA Steel 3D printer with the Octoprint program and I am very happy with the results. For reasons of mobility and distance, I came up with the idea of being able to compile Marlin Firmware updates through the OPI Zero. I've searched and everything found is meant to use the Arduino IDE in graphical mode with X-Window. But as you know the ARMbian for the IPO Zero lacks a graphical system and everything moves by terminal. Can you help me with this question? Do you know how to do termi…

Hello Igor, I am using vanilla 4.4 for labomo-r1 it seems zram module is missing. Do you intend to compile the kernel with this option, please? gr@bpi:~$ sudo modprobe -Rf zram modprobe: FATAL: Module zram not found. On raspbian, kernel 3.18.x-4.1.x, there is a kernel module "zram" useful for embedded systems... working fine (also using on my x86 laptop) https://wiki.gentoo.org/wiki/Zram Nice week-end, Regards, Guillaume

Hi there, I am new to the community, but read it for quite a while. I try to bring my own smart mirror project to life. So far everything runs good and I am pretty impressed with all the efforts you guys put into Armbian. There is one little thing that I can't solve my own (due to limited coding capabilities). The supported resolutions doesn't offer the one supported by my 10,1" Tontec display. It is connected via HDMI and offer a resolution of 1280 x 800px. Where 1280 x 720px work it stretches the content, which makes small copy unreadable. I found several threads where users discussed about this resolution. Would it be possible to make this reso…

He forum members, I try to install telegraf on my R2 running armbian bullseye: # PLEASE DO NOT EDIT THIS FILE BOARD=bananapir2 BOARD_NAME="Banana Pi R2" BOARDFAMILY=mt7623 BUILD_REPOSITORY_URL=git@github.com:armbian/build BUILD_REPOSITORY_COMMIT=aec64805a DISTRIBUTION_CODENAME=bullseye DISTRIBUTION_STATUS=supported VERSION=21.08.1 LINUXFAMILY=mt7623 ARCH=arm IMAGE_TYPE=stable BOARD_TYPE=csc INITRD_ARCH=arm KERNEL_IMAGE_TYPE=Image BRANCH=legacy I can install influxdb via apt install influxdb without problems, but can't install telegraf that is part of influxdb (E: Unable to locate package telegraf) So I …

Hello, I have a PineA64LTS I use as a nextcloud server (running on docker). A few days ago, I updated it (for the first time in a loong time) and ended up on a boot problem. Loading, please wait... Starting version 245.4-4ubuntu3.4 Begin: Loading essential drivers ... done. Begin: Runing /scripts/init-premount ... done. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Begin: Running /scripts/local-premount ... Scanning for Btrfs filesystems done. Begin: Waiting for root file system ... Begin: Running /scripts/local-block ... done. done. Gave up waiting for root file system device. Common problems: - Boot args (cat /proc/cmdli…

Rock Pi S @%^ Mb Ram no WiFi not starting with Armbian. Got this as output Spoiler Resetting CPU ... INFO: PSCI Power Domain Map: INFO: Domain Node : Level 2, parent_node -1, State ON (0x0) INFO: Domain Node : Level 1, parent_node 0, State ON (0x0) INFO: Domain Node : Level 0, parent_node 0, State ON (0x0) INFO: Domain Node : Level 0, parent_node 0, State ON (0x0) INFO: CPU Node : MPID 0x0, parent_node 1, State ON (0x0) INFO: CPU Node : MPID 0xffffffffffffffff, parent_node 1, State OFF (0x2) INFO: CPU Node : MPID 0xffffffffffffffff, parent_node 1, State OFF (0x2) INFO: CPU Node : MPID 0xffffffffffffffff, …

i have a RK3399 and a samsung-860-pro-512gb when i boot with this ssd connected using this official cable (which was recommended for this model by the orange pi manufacturer), i get this in dmesg: sd 0:0:0:0: [sda] Attached SCSI removable disk sd 0:0:0:0: Attached scsi generic sg0 type 0 but when i do `fdisk /dev/sda` i get `fdisk: cannot open /dev/sda: No medium found` when i put this ssd in my laptop, it is working correctly. i also soldered an alternive sata cable where the 12V power was connected instead of the 5V, don't remember exactly how, but that didn't work either.

I'm trying to get VPU acceleration on Manjaro ARM and I'm having trouble figuring out how Armbian is able to leverage the VPU with Hantro still incomplete. I know it uses RKMPP but I don't know which driver or patches I need to enable it in the Kernel and DTS. Any help is appreciated, thanks in advance.

EDIT: SOLVED, I think. I installed gdm3 then performed a full firmware upgrade from armbian-config. Performed a reboot and now I have an X desktop over RDP. It's working. I wonder if I cheated and lightdm is still broken and using gdm3 is simply a cheats way out. Why would lightdm not work would still be interesting investigating. I do not know if this is a bug or something I've done, but I can not get the xfce4 desktop environment running over the RDP and was wondering . . . 1) Does someone know how to diagnose this problem and fix it? ... OR ... 2) How do I rip out the problem software and all other files so I can try an…

I use smoothly such LCD on my raspberry Can I use it on Orangepi (one)? Any tutorials?

Hi i have 2 drives connected to my Cuboxi 4pro imx6. A sata drive and a usb drive. I am trying to get them to spin down because they will only be accessed in the evening and possibly during the day and evenings in the weekends. To let them all spin 24/7 makes me really nervous. The sata drive mounted and is in fstab: UUID="15bd6efe-5765-44a8-9750-9d31f19413aa" /media/SATAHD ext4 defaults,nofail 0 0 fdisk output for the sata drive is —————— Disk /dev/sda: 3.7 TiB, 4000787030016 bytes, 7814037168 sectors Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimu…

I need the install php > 7.0 for Nextcloud 16.07. I have installed php 7.4 successfull but I don't get php7.4-gd installed php7.4-gd : Depends: libgd3 (>= 2.1.1) but it is not going to be installed When I try to install libgd3 I'm getting these errors libgd3 : Depends: libpng12-0 (>= 1.2.13-4) but it is not installable Depends: libwebp5 but it is not installable How get I solved this issue ??

Hi, I'm running Armbian Ubuntu Server on my Neo2 and works quite good. I just can't install Wireguard. I have installed kernel headers from armbian config, bit still fails. I use the ppa repo. Kernel stable latest, 4.19.57 Any ideas how to proceed and install?

UPDATE: Today I build it again and now it's working, I think someone has change something. Thank you :-) OLD: I created an new board, based on the lime-a33.conf with BOOTCONFIG="q8_a33_tablet_1024x600_defconfig" and build a Debian Stretch Image with mainline Kernel 4.13 / 4.14. The SD Card is booting with a nice screen output but only to Kernel Boot, then the screen freezes. The Serial connection is only in the SD Adapter and I cant use it if I'm booting from it, or is there a possibility ?? I was checking devuan.org and this Image is booting the Tablet, with Kernel 4.1x. So I want to debug the Armbian Kernel wit…

Hi everyone, I am trying to set up the Access Point on my Orange Pi Zero running Armbian_20.08.1_Orangepizero_focal_current_5.8.5. I am using the onboard wifi module. I have tried the next approaches: 1) I have tried https://orangepiweb.es/wifi-access-point.php and I can see my board as access point, but I can't connect. (I am receiving AP-STA-DISCONNECTED after handshake complete) 2) I have tried configuring it by sudo armbian-config but dnsmasq fails to start, so I can see my board as access point, but I can't connect. (I am receiving AP-STA-DISCONNECTED after handshake complete) 3) I have tried https://www.ra…

Apologies, the links on how to change the Armbian boot kernel don't lead to any documentation. I am wading through the u-boot documentation tree now, but somebody may have an answer to a simple question. I manage to make my device unbootable by using armbian-config and selecting a development kernel vmlinuz-4.20.0-rockchip64 I have mounted the disk on a ubuntu laptop and I take it u-boot is similar to grub2 in that its not just a case of changing the symlinks Image -> vmlinuz-4.4.167-rockchip64 Uinitrd -> uInitrd-4.4.167-rockchip64 you have to do a grub2-mkconfig command \ grub-update in order to boot strap t…

Hi, Unfortunately I'm not yet allowed to post in the development area. I'm using a rockpro64 with armbian quite successfully, Beside other stuff it has two DVB-C USB sticks connected. But I can only run the kernel dpkg -l | grep linux-image hi linux-image-rockchip64 5.75 arm64 Linux kernel, version 4.4.174-rockchip64 since further 4.4 kernel (e.g the latest one linux-image-rockchip64_5.90_arm64 (4.4.182) does not have the CONFIG_VIDEO_EM28XX set to m as before. What are actually the plans in this regard. Is there some good reason that is was disable…

I've started playing around with gpio, and thus far I don't have problems with any of the following: Access via the WiringOP C or Python bindings Access via /sys/class/gpio_sw However I can't seem to get the access via /sys/class/gpio to work. According to http://linux-sunxi.org/GPIOI need to write the pin number as defined in the fex file to /sys/class/gpio/export for 3.4 kernel (mainline kernel codes the pin number). For WiringOP pin #1 (physical pin #12 on the header), this is PD14, which is gpio_pin_5 according to the fex file, however the following does not light an LED connected to the pin: # echo "5" >/sys/class/gpio/export # echo "out" >/sys/class…

I have a project where I would like to connect two project boards together with an Ethernet cable. No router, no hub, just two boards with a patch of cat5 between them. In order to make this work I need to get a Link-local IPv4 address on each (RFC 3927). I believe this is done with avahi, but I'm unsure if avahi is simply name resolution or if it performs the link-local address allocation as well. Anyway here's what I've tried: sudo apt-get install avahi-daemon avahi-discover libnss-mdns # sudo reboot -r now # systemctl script on reboot to log IP to file with `hostname -I` What I find is that when I'm hooked up to my router `hostname -I` reports wha…

Getting below error: whereas board is shown connected