Beginners

Hi all. This is not Armbian related. But I don`t know where else to ask. I`m doing research on the NanoPi DUO2 running FriendlyCore with kernel 4.14 for my next review video. I would like to film the video with the DUO2. For that I`ve got a camera, it works. But only at 7 fp/s. On the FriendlyARM wiki it sais: I tried searching for kernel 3.4. But I`m unable to find it(I think). This is what I get. I don`t think/know these are useable. pi@NanoPi-Duo2:~$ sudo apt-cache search linux-headers 3.4 linux-headers-3.4.0-1-hammerhead - Linux kernel headers for version 3.4.0 on Nexus 5 linux-headers-3.4.0-4-goldfish - Linux kernel headers for version 3…

Nice to see adafruit recommending armbian in his projects: https://learn.adafruit.com/circuitpython-on-orangepi-linux/initial-setup

So far I've been able to get just about everything running with Armbian but I just haven't got my head around routing a usb / mpci 4g modem. I clearly see it's a ttyACM0 device, I can see it's a USB connection in nmtui, ifconfig shows it as usb0 interface. I think the hardware is good and Armbian is talking to it fine. Can someone point me to a tutorial somewhere that would turn the light on for a first time try at routing data from a cellular modem? I'm using a clearfog pro but I also have an espressobin. The modem is a U-Blox MPCI-L201 and I imagine should work on either board. I'm probably just not putting the right questions to uncle googl…

Hello. I created a HotSpot with my Orange Pi Zero H2 with the latest version of Armbian Bionic. Everything seems to work, but I need the access point to reserve dynamic IPs, ie for a device with MAC address XX.XX.XX.XX.XX I have to reserve and then assign a specific IP address XXX.XXX. XXX.XXX. Any idea how to configure this HotSpot? Do I have to add some commands to the hostapd.conf file or what? Thanks in advance for any help.

I have a orange pi plus 2e The time was ok a few days ago but now it is off by - 12 hrs +53 minutes which is before gmt thanks for your help Dave Do I need to open a port in the router?

Hi there, I am just starting with Armbian, installed on odroid c2 emmc card, all seems to work, but when I tried to install software via armbian-config/softy just when I hit that I got on the screen small error: /etc/resolvconf/update.d/libc: Warning: /etc/resolv.conf is not a symbolic link to /etc/resolvconf/run/resolv.conf It is disappearing after 2-3 sec and I can install software which works (at least omv which I wanted) but it is weird to me.

Hey guys! Cheap Android tablets based on allwinner chipsets were pretty common back in 2012. Recently I found an tablet equipted with an Allwinner A10 SoC (LY-F1) lying lonely around on my fathers desk. He bought that tablet back then because of the cheap price, but never really used it. Luckily my father also saved an Android 4.0.4 ROM he downloaded from the suppliers website back then, because all websites of this supplier are offline now. After playing around with my OPiZ and seeing how well the sunxi/armbian kernel works, I thounght myself i should try to boot linux from this tablet. At first I tried to pack an image that can be directly writte…

Hi I am using a NanoPi M1+ device with nanopi-m1-plus_sd_friendlycore-xenial_4.14_armh OS in it. I attached an RTL8188EU WiFi adapter in it. But the **ifconfig** doesn't show up. On doing **lsusb** I get Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 002: ID 0bda:8179 Realtek Semiconductor Corp. RTL8188EUS 802.11n Wireless Network Adapter Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 006 Device 029: ID 413c:2113 Dell Computer Corp. Bus 006 D…

device: orange pi (any type) os: any orange pi desktop os should be fine reward: $400-900 paypal if swf runs in standalone (must show video proof) I am having issues installing deb package crutziplayer I need it to atleast run on one of the orange pi models, it installs and runs fine but the tough part is getting it to work with a flash plugin libpepflashplayer.so to run an swf, crutziplayer is open source python you can read through the code if you install it, they say its made for Linux mint/Ubuntu maybe not arm architecture but it installs/runs fine on orange pi just the plugin part is the problem. I am not looking for half finished gnash/spark pl…

Looking for help on how to install either freepbx or elastix on the OPiPC+ running latest Armbian desktop jessie. I was pointed an article awhile back but it did not work and I am by no means an expert! Any and all help is welcome. Thanks

Hello everyone, First let's just say that I know this problem doesn't concern Armbian and I understand if no one help me or this topic get deleted. I have been working with Nanopi K2 for a month to make it work with libreelec and I haven't had any luck so far, I'll share what I have done and hopefully someone who knows a lot more than I do and have the proper knowledge/skills can make this work. There is an old version of Libreelec that work with K2 without any problem but it's really outdated and I'm looking for the latest version, Here is the link for LE8.0 with kodi 17.1 for K2, (No H.265 support on this version, witch is all I need) …

I'm using the Openmediavault+ARMbian image provided by Tkaiser. When I go to armbian-config --> System there is no 'Install - installs to SATA, eMMC, NAND or USB' option (according ARMBian documentation it should be there ). Just checked at a Odroid HC1 and a Banana pi 1, both running the "same" Openmediavault+ARMbian ROM. They also don't have the option van 'Install' option available. @Igor, @tkaiser is this option moved to a different location? Or just not present for the Openmedivault+ARMbian combo?

[ 1327.109430] Bluetooth: hci0 command 0x2005 tx timeout [ 1329.113391] Bluetooth: hci0 command 0x200b tx timeout [ 1331.117400] Bluetooth: hci0 command 0x200c tx timeout [ 1418.207334] Bluetooth: hci0: Frame reassembly failed (-84) [ 1418.207393] Bluetooth: hci0: Frame reassembly failed (-84) [ 1418.207444] Bluetooth: hci0: Frame reassembly failed (-84) [ 1418.207495] Bluetooth: hci0: Frame reassembly failed (-84) [ 1418.207581] Bluetooth: hci0: Frame reassembly failed (-84)

hello dear experts, What is the default login on a banana pi i installed raspbian on my m2 and i tryed evry login but i cant login please help!! what are the login codes? Armbian Stretch mainline kernel 4.14.y Server or light desktop usage scenarios. I’ve got this using Username as pi and Password as bananapi but the password is wrong love to hear from you

I'm gonna keep this short. I installed Omv on my Odroid HC2 via armbian-config. I messed up and now cannot get into discs or filesystems tab in Omv and cannot add new shared folder. Using a htpc script called Atomic Toolkit, I updated an app, I think nginx and by that the PHP 7.2 automatically was installed by the script. Here is the thread on Omv. I'm writing this in the hope that maybe @tkaiser or someone else may have an idea to fix this. If not, I'll start over and would like to know how I can reinstall omv. In armbian-config I tried to untick omv and continue, but this does not remove omv ..Maybe I don't have to completely remove omv…

In order to install webmin I need to install apt-show-versions however trying to install that fails

Hi There! I noticed the EOS for the OrangePi+ and that the OrangePi+ 2 is still supported. Since boards are almost identical, why leave the OrangePi+? And on top of that: when I download the current version, the downloads are the same for both boards.... Or am I missing something?

Hi, i have make a Update of kernel 4.19.x, but After the Reboot the Cubitruck doesn‘t start. I only See the Message of the Screenshots attached. What can i do To run the System again? Thank you Gesendet von iPhone mit Tapatalk

Hi guys! This is my first post on Armbian forum so just want to say that I appreciate your work on Armbian. It's great! :) Couple days ago I've downloaded latest release of Armbian - Armbian_5.65_Orangepipc_Debian_stretch_next_4.14.78.7z After successful start on OPi PC board I have installed minimal desktop. I've created Wi-Fi network (using network manager) so my OPi PC board can act like a Access Point, and this works fine. Wi-Fi network is visible on other devices and they can connect to it. The problem is that there is no DHCP server working on OPi. This mean that any of devices which connects to the OPi's …

Hi all, I am trying to have a script running when eth0 i s up, but it seems that I don't get it. Although I followed a guide and set anything, NM is not triggering my script. So I have created my script without sh extension and called it 90-start-script in /etc/NetworkManager/dispatcher.d: logger -s "I DON'T SEE THIS" if [ "$1" == "eth0" ]; then case "$2" in up) ~/scripts/start_check.sh ;; esac fi; I gave it root ownership, execution flag, but it seems to be not working... I followed this guide: https://wiki.archlinux.org/index.php/NetworkManager#Network_services_with_NetworkManag…

Hi, I'm using LCD panel[1] and OV5640 camera sensor on SoPine and Pine64 LTS and trying to follow steps mentioned here[2]. It hangs while graphics initialize Welcome to Ubuntu 16.04.5 LTS! [ OK ] Created slice system.slice. Starting Accounts Service... [ OK ] Started Accounts Service. [ OK ] Reached target graphical.target. << hang here >> any help? [2] http://wiki.pine64.org/index.php/SOPINE_Armbian_LCD_and_Camera [1] https://www.pine64.org/?product=7-lcd-touch-screen-panel

Hi, I would like to run my NanoPi M4 from an external USB3 SSD. Does anybody know if the images here: http://wiki.friendlyarm.com/wiki/index.php/NanoPi_M4#Work_with_FriendlyCore Will work? Or are they specifically for SD or eMMC? If they won't work, how do I modify to make it work? Many thanks! M

Is something wrong with armbian? On my BPI M1, I get this apt error today. Err:6 https://apt.uk.armbian.com stretch Release server certificate verification failed. CAfile: /etc/ssl/certs/ca-certificates.crt CRLfile: none Reading package lists... Done E: The repository 'http://apt.uk.armbian.com stretch Release' does no longer have a Release file. N: Updating from such a repository can't be done securely, and is therefore disabled by default. N: See apt-secure(8) manpage for repository creation and user configuration details.

Hello, I wonder how I can perfom this task in armbian in a standard way. Thanks Gianni

Thank you for the Armbian 5.66 images for the Banana Pi M2 Ultra. I would like to speak out a wish. Is it possible to add the kernel module uinput in the next revision? It would help me for using multimedia keys via bluetooth. Many Thanks in advance Markus

I have a Nanopi K1 Plus board and I have a 7" LCD screen. Can my motherboard use this controller and can I connect it to my 7" LCD screen? I found a controller on the Internet: This is a contoller.

My /var/log fills to 100% quickly after cleaning. I am running Ubuntu 18.10 with Nextcloud snap on a Cubox-i4. Others have mitigated the problem by changing the logging strategy, but I rather not mess with this. Any ideas?

Hello everyone. I ran "apt upgrade" on my board, which also updated kernel, and after reboot it won't boot up. I've managed to copy output from serial, here it is: Spoiler U-Boot SPL 2017.11-armbian (Jan 24 2018 - 22:08:25) DRAM: 1024 MiB Trying to boot from MMC1 U-Boot 2017.11-armbian (Jan 24 2018 - 22:08:25 +0100) Allwinner Technology CPU: Allwinner A31s (SUN6I) Model: Sinovoip BPI-M2 DRAM: 1 GiB MMC: SUNXI SD/MMC: 0 *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: eth0: ethernet@01c30000 starting USB... USB0: USB EHCI 1.00 USB1: USB OHCI 1.0 scanning bus 0 for devices... 2 USB Device(s)…

Hi, With armbian-config i have installed the system into a pendrive (still boots from emmc). I want go back to full emmc system without formating emmc or reinstalling. Any ideas? Sorry for my english

Hello All, I finally got Armbian for the BPI-R2 installed and I must say, it is the best OS I had ever used on it. It makes the BPI-R2 usable now, which is great since it is very good hardware. I plan to use it just as a server (no desktop plans, as that could get too painful). If any BPI-R2 tests need to be done or the such, please let me know. ta, t.

Hi all, We try develop remote controlled plug with Orange Pi Zero r1... We have some problems... We want operation is follow this steps: 1- Powered device... 2- First Start Device is opening with Wifi AP mode (?) 3- Users connect to device with ethernet or Wifi 4- Go to (192.168.1.1) 5- If users want to direct control plugs no problem they are using this page Open/Close plugs. 6- If users want to 'device is connect LAN', they are select LAN selection and if they have wifi, select their wifi SSD and type pwd and click SAVE button or connet with Ethernet. (?) 7- Device is restart and connect to LAN.. 8- They are …

Hi Igor. I think I found another inadvertenttant bug in the build since the desktop was unseparated out. The new build is calling chromium instead of chromium-browser, and it's breaking. It brings up a brief pink screen. When you call it from a window it calls this image below. Otherwise it is installing desktop on the H3 just fine.

Helo, I've just installed armbian on an Orange Pi box and using it just for remote VPSs, any easy way to disable the X windows graphical interface from the console ? thanks

I did flashing the firmware of ZIDOO H6 PRO. After that, the original firmware does not boot (even when connected to the power source, the LED does not work). However, operating with firmware on ZIDOO H6 PRO will operate normally. I think something is LOCK in NVRAM. Has anyone solved this problem?

Hello I`m install armbian 5.60 on my Orange Pi WinPlus and next VNS server and connect from Windows use the VNC Viever but the desktop is missing I see just this screen Not sure but meyb I instal the server version How I can check this and if it`s it`s possible to update for desktop version My SD card have only 2GB . Regards

I'm trying Monitor Mode under an orangePi pc plus which use the RTL8189FTV chip, And under armbian, After I config it as Monitor Mode, it crash with segment fault root@orangepipcplus:~# iwconfig wlan0 mode monitor Message from syslogd@localhost at Nov 6 03:13:37 ... kernel:[63339.624651] Internal error: Oops: 5 [#1] SMP THUMB2 Message from syslogd@localhost at Nov 6 03:13:37 ... kernel:[63339.740200] Process iwconfig (pid: 9670, stack limit = 0xed9a4210) Message from syslogd@localhost at Nov 6 03:13:37 ... kernel:[63339.746393] Stack: (0xed9a5d6c to 0xed9a6000) Message from syslogd@localhost at Nov 6 03:13:37 ... kernel:[63339.750768] 5d60: …

Hi everyone Board: Odroid HC1 Tried to install Sonarr using armbian-config(softly) and it worked just fine, tried the same with radarr and got the following error during installation: tar: This does not look like a tar archive gzip: stdin: unexpected end of file tar: Child returned status 1 tar: Error is not recoverable: exiting now. Looks like an issue with the package not beeing downloaded correctly. Any Ideas?

Hello. My image for Orange Pi One has the following build after apt update and apt upgrade ARMBIAN 5.60 stable Ubuntu 16.04.5 LTS 4.14.70-sunxi "sudo systemctl enable resize2fs" does not work anymore Error message says "Failed to execute operation: No such file or directory" "sudo systemctl enable resize2fs && sudo reboot" works on old kernal images @tkaiser could you please advise how to reinstate SD card resize on first boot? Thank You.

Hello all, I wondering how is mange the gpu in all Armbian Image

hi, iam trying to compile wlan modules and here is the result: Spoiler sfalk@nanopct4:~/Downloads/rtl8814AU$ make make ARCH=arm64 CROSS_COMPILE= -C /lib/modules/4.4.162-rk3399/build M=/home/sfalk/Downloads/rtl8814AU modules make[1]: Entering directory '/usr/src/linux-headers-4.4.162-rk3399' CC [M] /home/sfalk/Downloads/rtl8814AU/core/rtw_cmd.o In file included from ./arch/arm64/include/asm/sysreg.h:25:0, from ./arch/arm64/include/asm/cputype.h:99, from ./arch/arm64/include/asm/cachetype.h:19, from ./arch/arm64/include/asm/cache.h:19, from include/linux/cache.h:5, …

How can I setup my banana pi M2 H2+ ARMBIAN 5.41 user-built Ubuntu 16.04.5 LTS 3.4.113-sun8i camera module I set this command "sudo modprobe sunxi_csi1" and returned: "modprobe: FATAL: Module sunxi_csi1 not found in directory /lib/modules/3.4.113-sun8i" I Don't see /dev/video0 Can I confirm and setup my camera module?

How to take full backup like clone...from emmc for next installation

I have the 'Full Featured Version' of these boards: https://www.phytec.de/produkt/single-board-computer/phyboard-segin/ Featuring an i.MX 6UL-G2 CPU, Arm Cortex-A7 with 512MB Ram. Has anybody here tried running armbian on these?

Hello, I have an XU4 with an emmc. Now I have tried nextcloudpi image from https://ownyourbits.com/downloads/ here. I use dd. With a SD card, I have two partitions and can boot. With the emmc, I have only one partition and can't boot. I don't now why :-( can someone help me? greetings

I have been using Armbian with orange pi for a while now, PC+, Zero+ 2 and other H3 models, recently with Armbian 5.59 (also tried 5.62) I have been encountering an issue where WiFi is not properly working, I add WiFi credentials to "/etc/network/interfaces", then reboot, the WiFi is up for a few seconds after booting and DHCP server assigns an IP to the board, then WiFi just goes down again, this is the log on serial interface: Oct 4 18:09:44 localhost wpa_supplicant[1213]: Delete '/run/wpa_supplicant/wlan 0' manually if it is not used anymore Oct 4 18:09:44 localhost wpa_supplicant[1213]: Failed to initialize control int erface '/run/wpa_supplicant'.#012You…

Usually, when I configure SBC devices (in particular headless as the OPI Zero), what I do is to disable NetworkManager (even uninstalling it) and to provide a basic standard configuration on /etc/network/interfaces. However, I am noticing that the NetworkManager it is becoming more and more interleaved on the standard Linux configuration (as it is happening with systemd). In fact, my thought is that NetworkManager it is more a desktop thing than a server one. My question is: What is the right method to configure static servers, having unmovable IP addresses, routes and these types of things, with current and future Armbian releases? If it is nec…

Ciao a tutti, congratulazioni per questa bellissima comunità, oggi ho installato l'ultima versione di armbian per il mio odroid xu4, tutto è andato bene, il problema si verifica quando avvio lo script armbian-config, ho notato che OMV (openmediavault) c'è di più, perché? Grazie mille e buona serata

Hello, From a fresh new install (after upgrade), I try to install OpenMediaVault + OwnCloud using armbian-config, it leads to apt's lock out.: I have proceed, another time, and it leads to the same result. The troublesome package seems to be "openmediavault-omvextrasorg": "Removing openmediavault-omvextrasorg (4.1.11) ... /var/lib/dpkg/info/openmediavault-omvextrasorg.postrm: 22: .: Can't open /usr/share/openmediavault/scripts/helper-functions dpkg: error processing package openmediavault-omvextrasorg (--remove): subprocess installed post-removal script returned error exit status 2 Errors were encountered while proc…

Quick question for the Banana Pro builds. I've tested with stable Armbian Bionic and Stretch. By default DHCP is disabled on eth0, so the following lines must be added to /etc/network/interfaces to get it to work: auto eth0 iface eth0 inet dhcp But, official docs (section Common features) state: Is having DHCP disabled for ethernet by default the expected behaviour for that board ?

Hi All, I am having issues reading frames from a usb camera connected to my nanopi neo air. I can get images from a logitech C170 webcam fine but not from this other USB camera module. I can access it from my mac/ubuntu VM fine so it definitely works. The device is recognised as a video device and mounts to /dev/video0 but times out when I try to get frames from it. It seems like a driver issue but I can't figure it out. Here is the dmesg output after I plug it in: [Nov 1 06:27] usb 8-1: USB disconnect, device number 6 [ +2.029724] usb 5-1: new high-speed USB device number 22 using ehci-platform [ +0.160076] usb 5-1: device descri…

After apt-get upgrade I got 4.14.18-sunx installed on my organge pi+. docker daemon won't start. I tried removing and reinstalling it. tried dev, next and nightly builds to no success. docker gives an error that no overlay fs is available in kernel. tried ARMBIAN 5.60 stable and 5.64 nightly >apt-get install docker-ce fails with Setting up docker-ce (18.06.1~ce~3-0~debian) ... Job for docker.service failed. See 'systemctl status docker.service' and 'journa lctl -xn' for details. invoke-rc.d: initscript docker, action "start" failed. dpkg: error processi…

Hello! I bought an Orange Pi PC about two years ago which is still working perfectly to this day (very happy with it), but I am curious to know what would be considered the 'best' Single Board Computer at this time point time, which would be around the same price range ($15 USD). 'Best' being defined as having a decent processor, and good software support - which the Orange Pi PC eventually did. I'm tempted to just buy another one of these for another project, but interested to know. Again, the main factor is price - $15 USD or less would be ideal.

Hi, I have an Orange Pi Zero and I installed Armbian Xenial with xfce and tightvncserver. Everything works well but I couldn't use local mouse and keyboard, is it possible to use them? Sorry for my bad english.

I have installed omv and pi-hole via armbian-config and I can get web access to omv but when I try to get to pihole on my_server_ip/admin I am getting OMV screen red with software failure, as omv web interface seems on the same ip only without webport. So how to get to pi-hole web interface? Cheers

Sorry if this is the wrong place. I'm a noob to all this. I've searched the help files, Google, forum posts and can't find anything regarding a tinker board and no signal issue. I've only been able to find posts about Rasberry Pi Orange, and the solution used in those posts don't seem to apply here. I have an Asus Tinkerboard (not the S). I bought a 7" HDMI touch screen which was advertised as being Rasberry Pi compliant. 7" 800 x 480 HDMI-B TOUCHSCREEN FOR RASPBERRY PI https://www.velleman.eu/products/view/?id=439070 This screen doesn't use pins, just an HDMI port out. I've flashed different versions of Debian Stretch, Ubuntu, Debain based RetroPie imag…

Hi, I recently bought a 7'' 800x480 HDMI TFT LCD display. Im trying to make it work with my OrangePi Plus 2e where I have armbian xenial desktop distro. I have tried several settings on the scrip.bin file, but the screen is always white. ... screen0_output_mode = 2 screen0_output_type = 3 fb0_width = 800 fb0_height = 480 ... Its intresting that the same settings works perfectly on a Cubieboard2 A20 board. I also tried the Armbian bionic server and installed a light desktop from armbian-config and the display works! but the screen has a greenish tint. (and there is no script.bin file on a server version, so I cant compare to the xenial like…

I see multiple projects on GitHub for getting RTL8812AU devices working on Armbian. Right now, I'm working with a NanoPi M1 while I wait for a rock64 to arrive in the mail. I can get a driver to build, make and make install, but I cannot get the device recognized. The last project I tried was this: https://github.com/diederikdehaas/rtl8812AU

Hello @all, I bought an Orange Pi PC PLUS and an 5" touch display with XPT2046-touch controller (compatible with ADS7846): 5" Touch with XPT2046 The OPI PC PLUS works with Armbian_5.65_Orangepipc_Ubuntu_bionic_next_4.14.78.7 OS. The Display is mounted on the OPI PC PLUS and works fine with HDMI. But the Touch doesn't work. I tried several solutions which can be found in the inet. But the touch will not get work. As I can see in the schematic for the OPI PC+ the SPI0-bus is connected to the external connector (40-pin header). The SPI0-bus is also connected to the NAND-flash. May this the problem that the touch doesn't work? …

Dear All! I dont find Armbian for orangepi mini Where can I download the distribution for Orange pi mini? The latest working version? Help me

Hello All, I've tried Armbian_5.59_Xt-q8l-v10_Ubuntu_xenial_dev_4.18.6_desktop.img image taken from Though the system mostly works, in the main desktop menu (the one that opens clicking on left upper corner of the screen) I see no menu entry that can be interpreted as software management. By software management I mean a GUI application allowing to browse available package, read their descriptions and install or remove the packages. Examples of software management are https://en.wikipedia.org/wiki/Synaptic_(software) , https://en.opensuse.org/YaST_Software_Management , https://delightlylinux.wordpress.com/2016/12/23/software-a-better-software-…

Hi there, Is there a way to make an automatic switch between AV and HDMI when HDMI connector is connected/disconnected? ie By default AV composite signal is ON, if HDMI is detected while booting, then video and sound are output to HDMI instead of AV/L/R output. I read that if both TV out and HDMI are enable at the same time it can result in artifacts on HDMI and for that reason TV was disabled by default. So is there a way to detect if HDMI is plugged in, and if so disable TV out. I would say it needs 2 .bin files with each config, but how to detect if HDMI is present before loading .bin and load the right .bin according to situation? …

Hi guys. Igor if you are reading this, I'm Paul H. on the facebook Opi board. Just wanted to give you guys a heads up that I think something is breaking with the recent builds. I did a standard download install on an opi plus (eos) and got nodm errors when I went to install the desktop. Then on second run it sent me into a menu to select lightdm or nodm, and I've never seen that menu before. That installed some stuff when I selected nodm, but then failed. Subsequent apt-get installs gave me nodm errors. The desktop is not booting at all. So then I decided to move to a cubietruck and did the same thing, except it boots into the desktop and…

i intend use orange pi one ,only for download all night , but i instal armbian ,and not come download manager ,i need one same as jdownloader to download automated from host sites big games in many parts ,i need sugestions

Hello, I am using nanoPi Neo Core with mini shield nanoPi NEO CORE/CORE2. The OS that i am using is Armbian stretch downloaded from this link : https://www.armbian.com/nanopi-neo/ What I am trying to do is boot the OS from the SD card and have the filesystem on a SSD disk. In order to do that, I created a primary partiton on the disk using parted. Then I formatted the partition to ext4. I tried to execute nand-sata-install script using armbian-config. When I choose to boot from SD card system on SATA, the partiton of the disk that I created is found. When I select the partition, I got an error that the partition is too small…

Dears, I want to use Armbian Stretch mainline kernel 4.14.y and I buy LCD rgb S430 but I 've no display when I start. What I need to install for it work ? It's work whith s5p6818-sd-lubuntu-desktop-xenial-4.4-armhf-20180906.img but I don't want Lubuntu Best regard Pilpoile

Hey folks, I'm looking to build a little portable server to hold a local mirror of my cloud drive and run a light-duty testing server for medium-weight web apps (Django, big PHP blobs, etc). 2GB RAM, SATA support, and fanless are critical, USB 3.0 and GPIO ready to go with no soldering a big plus. I'm planning to get a 500GB SSD and use an Alfa AWUS036ACH 802.11ac USB dongle. Box will run headless except for configuration. I was looking at the EspressoBin but kernel support appears to still be incomplete and there isn't that big of a userbase. I also don't need two of the Ethernet ports on that board. I've looked around and it seems the combo of >1GB RAM + …

I've tried various methods. None work. What are the recommended Armbian ways to a) enable IPv6 temporary addresses b) disable IPv6 Thank you.

I use "Armbian_5.59_Tinkerboard_Debian_stretch_next_4.14.67". After every reboot the line for the nameserver in resolv.conf looks like this: ^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@nameserver 192.168.3.1 When I delete all ^@ chars my networks works fine. After reboot the characters are inserted again. I tried "chmod 444 resolv.conf" but after reboot resolv.conf has 644 again. How can I correct this? What is the problem with my installation? Best regards.

Hello, Did a fresh armbian install on odroid HC2 board/ updated etc...Im getting this in my syslog. It looks its complaining about ntpd. (Unexpected origin timestamp 0xdf6c1697.9f8452c6 and Unexpected origin timestamp 0xdf6c1697.9f8452c6 Is this a know issue or something that could be ignored? Thanks, Oct 13 09:01:03 localhost ntpd[1115]: receive: Unexpected origin timestamp 0xdf6c1697.9f8452c6 does not match aorg 0000000000.00000000 from server@193.2.120.3 xmt 0xdf6c16af.0ea2342a Oct 13 09:01:03 localhost systemd[1]: Time has been changed Oct 13 09:01:03 localhost ntpd[1115]: receive: Unexpected origin timesta…

Hi Guys, I am working with Orange and Banana Pi development boards all with a minimum og 8GB eMMC chips. I am looking for a process to clone a working system to an SD card and using it as a checkpoint for my configuration changes so should I mess things up I can revert to the previous checkpoint. I have used 'dd' in the past but it is considerably bigger than the standard install images and it slows down the recovery process quite a lot. Is there a better way for me to clone the working system to an SD card. Thank you in advance, Rick

My equipment is an OrangePi PC Plus with ARMBIAN 5.6, packages and system updated. I have seen that the /var/ log directory mounted as zram is reaching its space limit in a few days. To resolve, I edited the /etc/logrotate.d/rsyslog file and put the following: /var/log.hdd/syslog { rotate 1 10M size missingok notifempty delaycompress compress postrotate invoke-rc.d rsyslog rotate> / dev / null endscript } /var/log.hdd/mail.info /var/log.hdd/mail.warn /var/log.hdd/mail.err /var/log.hdd/mail.log /var/log.hdd/daemon.log /var/log.hdd/kern.log /var/log.hdd/auth.log /var/log.hdd/user.…

Hi, after upgrade to next kernel: my rtc-i2c stopped working. Here is the result for "Linux ... 3.4.113-sun8i #18 SMP PREEMPT Wed Jan 24 22:10:49 CET 2018 armv7l GNU/Linux" [ 6.008219] rtc-ds1307 0-0068: rtc core: registered ds1307 as rtc1 [ 6.008241] rtc-ds1307 0-0068: 56 bytes nvram [ 6.008277] i2c i2c-0: new_device: Instantiated device ds1307 at 0x68 Here is for "Linux ... 4.14.18-sunxi #24 SMP Fri Feb 9 16:24:32 CET 2018 armv7l GNU/Linux" [ 6376.740796] i2c i2c-0: new_device: Instantiated device ds3232 at 0x68 and nothing else (btw the same is for ds1307). Device rtc1 is not re…

Hey guys and a happy new year! I am working on a custom H3 board and I just got the prototypes from the oven. I am now trying to boot armbian on them. And as it's first prototypes I expected problems but I have trouble figuring out. I think it's because of my lack of understanding the boot process. See picture of the board enclosed. It don't tell much but it's nice to have a visual I think. On top right is a battery manager/power input. Right under is AXP8036 that makes 4 buck channels (1.35V for ram, 1.2V sys, 1.3Vcpu and 3.3V) Most is similar with orange pi PC schematic, there is few changes : - crystal and wifi is sa…

Ok so the title can confuse more than it really is! So basically I have a armbian distro configured as NAT where wlan0 is the internal interface and eth0 is the "pubic" interface that provides internet (this set is provided out of the box by armbian-config). My devices connect over wlan0 grabbing an IP, say 172.24.1.114 I have added a VPN to a remote network resulting in the creation of ppp0, with IP 10.10.10.12 Having these info, what I want to achieve is: * Only one IP (e.g. 172.24.1.114) has to always go towards ppp0 (that is all traffic back and forth should go to ppp0, so I can either reach machines and navigate on internet with the remote IP…

I have an orange pi with installed Ubuntu Bionic mainline Linux orangepione 4.14.65-sunxi, I have to create an economic access point with the Ralink MT7601U device (148f: 7601) already in possession, from the original driver configuration mediatek this device does not work as accesspoint but turning the network I found drivers modified in github that allow me to enable it as an AP. The driver of the newly installed distro is recognized as wlx00e1b0117ad1 but when I do iw list Supported interface modes: managed monitor there is no AP in the list. If I do iw wlx00e1b0117ad1 scan find me other wifi networks. One of the many guides I follo…

Hi, after cloning the working copy to SD cards is not working with new banana pi zero. all SD cards are working with same Banana pi zero form which image is cloned. OS - Armbian 5.41 Any solutions?

busybox or busybox-static package is needed for update initramfs must run after kernel updates. The busybox-static package is missing on the Tinkerboard and Odroid C2 image (may be others). I filed a bug report here: [busybox or busybox-static is needed for update initramfs · Issue #1124 · armbian/build · GitHub](https://github.com/armbian/build/issues/1124#issuecomment-427852788) Apparently it was not the right place. It got closed immedeatly: > The issue is closed for two reasons: it contains no valuable info and it's in the wrong place. I still consider this to be an important bug, so I leave a trace here.

Hi there. Any one have Schematic of LeMaker Guitar CPU Module? I found on a YouTube Video it was available before on official site download section but not available now. Only the Guitar Base Board Schematic now available. It will be very helpful if anyone can share. Thanks in advance. Regards.

Hi guys, I have orange pi plus and am going to adopt camera on this board. I got GC2155 camera module from another project and it's pin compatible with Opi's Con1. Therefore I would like to use this camera module on the PIO plus. I tried to search about GC2155 from this site, but I couldn't get any information. Any guy can help about this topic?

Hi all, Is there any reasonable way to login into Docker container and edit u-boot sources without running ./compile.sh script every time when container is created ? Is there any option to just create container and log into it ? I created Docker container by running command: ./compile.sh docker BOARD=bananapi BRANCH=next KERNEL_ONLY=no KERNEL_CONFIGURE=no RELEASE=stretch armbian Docker image is created. Now I want to edit some sources in u-boot directory but when I am running docker run -it armbian bash it immediately runs ./compile.sh script. I did check entrypoint definition in Dockerfile but still can't figure out how to actually …

Hi i try to get a ov5640 camera running on a banana pi m2 plus board. i builded the csi driver and it gets loaded, however i am not able to take picture: root@bananapim2plus:~/cap-v4l2# ./cap 1280 768 4 1 -999 -1 -1 ---- cap parameters ----- width: 1280 height: 768 v4l2 buffers: 4 exposure: -999 hflip: -1 vflip: -1 Mode: V4L2_MODE_VIDEO Driver: "sun6i-video" Card: "sun6i-csi" Bus: "platform:camera" Version: 1.0 Capabilities: 84200001 v4l2: unable to enumerate input. v4l2: failed to init camera. root@bananapim2plus:~/cap-v4l2# dmesg [23141.993618] sun6i-csi 1cb0000.camera: -> sun6i_csi_set_power() [23141.993653] sun6i-csi 1cb0000.camera: -&gt…

Hi. I added a second wireless interface to my Rock64 and created a wifi hotspot using armbian-config. Now .local domains are not resolved anymore. I tried changing in files /etc/resolvconf/resolv.conf.d/base and /etc/resolvconf/resolv.conf.d/head IP from 8.8.8.8 to 127.0.0.1 but nothing changed. avahi-resolve-host-name is ok: christian@rock64:~$ avahi-resolve-host-name orangepi2mini.local orangepi2mini.local 192.168.0.12 but christian@rock64:~$ ping orangepi2mini.local ping: orangepi2mini.local: Name or service not known Could anyone point me on what could have gone wrong? Many thanks. Christian

I took the 4.10.3 kernel cause it nows how to handle my PCTV 461e. The Installation works fine. tvheadend installation.txt

Hi, does anyone have experience of using this: https://ru.aliexpress.com/item/Raspberry-pi-2-HIFI-DAC-I2S-Interface-Special-HIFI-DAC-Audio-Sound-Card-Modulecompatible-raspberry-pi/32652350376.html device on Orange Pi PC Plus I have modifyed script.bin file: [twi1] twi_used = 0 and [pcm0] daudio_used = 1 Then i saw in pulse audio new device, called "sndaudio" aplay say this: root@orangepipcplus:~# aplay -l **** Список PLAYBACK устройств **** карта 0: audiocodec [audiocodec], устройство 0: SUNXI-CODEC sndcodec-0 [] Подустройства: 1/1 Подустройство №0: subdevice #0 карта 1: snddaudio [s…

Hello On the bananapi forum I noticed Igor's post (2018/08/22) that is for download image for bananapi m2 ultra. Support is not provided. I have a question about the sound device. This one directly from the SOC R40 is not supported and no one is working on it as. I spied this in the matrix for allwinner. But I use an external sound card on usb https://www.hardkernel.com/main/products/prdt_info.php?g_code=G141629380416. It works with every kernel and single board. And here in the case of the 4.18 kernel and bananapi m2 ultra, there are problems with getting connected to the pulseaudio server; which does not work at all. Is there a chance that this will be corrected.…

Dear all, I love Armbian on my Banana Pro and so I also would like to use this OS on my brand mew Odroic C2. Every installation and configuration works except installing TVHeandend. I tried to compile it because via armbian-config it does not work. But it does not matter which branch I use and which option I try it is not possibe to install on mainline or legacy version. I do not need transcoding - the TVHeadend server just should serve my Kodi with dvbs. Can anybody send me an instruction to compile TVHeadend with Armbian on Odroid C2 sucessuflly? Maybe it is possible to compile completely without ffmpeg? T…

Hi everyone viewing this post, here is the situation. I think I have configured my hostapd correctly, but I cannot find the ssid(I haven't hidden it), and I cannot even join mannualy. there is no fatal error in the log so I don't know what to do. PLEASE HELP. THANK ALL OF YOU VERY MUCH. -----here is the log----- Spoiler random: Trying to read entropy from /dev/random Configuration file: /etc/hostapd.conf ctrl_interface_group=0 nl80211: Could not add multicast membership for vendor events: -2 (No such file or directory) nl80211: TDLS supported nl80211: Supported cipher 00-0f-ac:1 nl80211: Supported cipher 00-0f-ac:5 nl8021…

I have been working on orange pi zero h2 daily for about a year to make a pretty good distribution but now I want to produce my console but the board only comes with headers and usb/Ethernet all soldered on making it fat, any one have a connection to the manufacturer to not make it with pins or usb/Ethernet soldered on. This is what I want my orange pi zero h2 to look like: https://www.friendlyarm.com/index.php?route=product/product&amp;path=69&amp;product_id=212 I have had bad experiences with the h3, only h2 is good for me.

I am running the following OS: Linux renegade 4.4.156-rockchip64 #21 SMP Wed Sep 19 13:14:57 CEST 2018 aarch64 Hardware: Firefly ROC-RK3328-CC / Version 18.04.1 LTS (Bionic Beaver) MicroSD: 64GB The image I used was only 32GB. How do I reset it so it will resize/expand to the full MicroSD capacity? I have searched the forum and have tried what was suggested but they did not work.

I have been going over forum after forum trying to figure out how do this, and nothing seems to match up. I just downloaded MySQL on my new Rock64. The OS is installed on a 32GB eMMC, and I have a 1.5GB USB 3 HDD installed for my home folder and all the user data. I bought this to be set up as a LAMP server, and have installed Apache and PHP, which are working well. I haven't had any luck with MySQL though. It seems that nothing matches the documentation. All the documentation and forums say that the configuration file is located at /etc/mysql/my.cnf In that configuration file, there's supposed to be DB location settings,…

Hi all, I've been reading a lot about VPU acceleration for h264 decoding and encoding. However, it seems that there is not much regarding transcoding (decoding + encoding). I would be interested in decoding 1080p h264 and encoding it back to 720p h264 in realtime. Ideally having that operation on 2 streams in parallel would be great. I've seen that quite some work has been done in cedrus As I can, h264 decoding seems to be supported but encoding is unclear. And there is obviously no comment about running both operations at the same time. Since I would like to run a few tests and maybe help a bit, what hardware should I order…

Hi, I just got a mini ITX Board for just 20 bucks, with PCIe x1 Slot, an M.2 Slot and a miniPCIe Slot - okay, only 1 Gig of Ram and only dualcore, but hey... Advantech Freescale RSB-6410 NXP ARM® Cortex®-A9 i.MX6 Dual/Quad Mini-ITX Motherboard Manufacturer Dropbox Images Wiki Page... I thought, how hard can it be to bootstream armbian/debian on this device, but despite chroot'ing into debian I did not really succseed and stuck in a really (!) crappy Yocto Linux environment without any packet manager and crappiest QT Interface you can think of... In the Dropbox folder of the manufacturer there are a couple of…

It appears that btrfs root images built with ROOTFS_TYPE=btrfs are currently broken. E.g., attempting to boot with a btrfs root: Starting kernel ... Loading, please wait... starting version 232 Begin: Loading essential drivers ... done. Begin: Running /scripts/init-premount ... done. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Begin: Running /scripts/local-premount ... Scanning for Btrfs filesystems done. Begin: Will now check root file system ... fsck from util-linux 2.29.2 done. mount: Invalid argument done. Begin: Running /scripts/local-bottom ... done. Begin: Running /scripts/init-bottom ... mount: No such file or dire…

Hello, I try to set "channel=acs_survey" in hostapd.conf but this option is not recognized and hostapd can not be started with this. Was hostapd compiled with this option? Or does it come from something else? Thx ps: sorry for my poor English...

I followed instruction of adding overlay at http://linux-sunxi.org/1-Wire This resulted in an error during boot and non functional 1-wire: Removing "#" comments from armbianEnv.txt resolved the issue Can you please confirm if comments are allowed in armbianEnv.txt? Thanks

Hi Guys, I buy me in LCD-Display (BL035-RGB). This will be connect to my Banana PRO. All this I do, how it is described on this page "here". After change the config, add the script.bin and reboot, the display do nothing. It all the time black. It come no flash or something. My question is, what I have to change on my Banana Pro? I have install ARMBINA 5.31 (4.11.6-sunxi). One thing. How I can test the LCD-Display for conection? Can I send commandos to the Display? thanks for YOU help.

Hi! I've been reading a lot about iptables in last few days but I can't get my head around the configuration that I need. I'm still learning and this is beyond my scope. I've set the Rock64 as an access point connected to a vpn server. I need to access any devices that are connected to my main router in 192.168.10.1. My wlan access point is in 172.24.1.1. eth0 and wlan0 are always tunnelled through tun0 and it must stay that way. Connected from wlan0 I can ping 192.168.10.176 (eth0) but not 192.168.10.1 (Internet router) or anything else outside wlan0 subnet. My aim is to access smb servers, nfs servers and ssh to any ip in this subnet 192.16…

I did enable Hotspot in armbian-config and that creates 172.24.1.1 for the WLAN adapter and 172.24.1.50 - 172.24.1.150 for DHCP. I want to change it to 172.29.2.1 First thing i did was changing the dnsmasq.conf to: interface=wlx647002073fb2 # Use interface wlx647002073fb2 listen-address=172.29.2.1 # Explicitly specify the address to listen on bind-interfaces # Bind to the interface to make sure we aren't sending things elsewhere domain-needed # Don't forward short names bogus-priv # Never forward addresses in the non-routed address spaces dh…

Hello guys! i had download armbian for bananapi m3(a83t) from arambian for bpi-m3. And braking my mind with friending sinovoip LCD+touchscreen module. I tried all the known options for me to connect the LCD display S070WV20HG-DC16 with the touchscreen on the ft5x_ts driver, and failed because apparently not smart enough for this, the my brains are exploding. In the kernel, I did not find the drivers on the display (S070WV20_MIPI_RGB) and the driver on the screen in the kernel is not compiled. Is anyone can correct in the device tree file the parameters for the LCD section for the display as I understood the data can be taken from the fex file: …

I downloaded image from https://www.armbian.com/orange-pi-pc-plus. It marked as STABLE and has kernel 4.14.65. Package linux-image-next-sunxi version 5.59. I'm trying to install kernel headers but in repository no package linux-headers-next-sunxi. And also in repository no package linux-image-next-sunxi (it installed in downloaded image) so it is not possible update other orangepi to latest kernel.