Beginners

Hello I am using cubieboard 1. I have 3 problems 1) How to format sd card and auto mount when the cubieboard starts? 2) How to store mariadb database and www folder in sd card? I dont have enough space in nand. i want mariadb stores database in sd card 3) How to configure freedns afraid?

I installed Armbian_5.24_Orangepizero_Ubuntu_xenial_dev_4.9.4 on my Orange Pi Zero. Because it has no video out, I try to login via SSH. Unfortunately the password "1234" does not work for user root. I get "Permission denied (publickey,password).". Is the password wrong?

Hi Guys i searched the forums but could not find anything too similar. Any advice would be welcomed. Summarised version I am currently trying to install the OrangePiPC Debian Server image of Armbian on a custom H3 board emmc and getting a kernel error (Gave up waiting for root file system device. Common problems . Please see serial log at bottom for full information. TLDR VERSION Objective To install armbian directly onto the emmc. Board Information Board acquired from a manufactorir. It has USB_OTG, eth, Uarts, emmc and some other ports but NO SD card slot. Using OrangePiPC as it seems the most similar. How I am Installing 1…

Pretty simple question, I know a few years ago the temps provided by armbianmonitor were off by 10-15 degrees celsius, is that still the case today? Or are those temps accurate in newer versions of Armbian?

I'm using the image Armbian_5.38_Orangepizero_Debian_stretch_next_4.14.14.7z. My NetworkManager version is 1.6.2-3. Certain NetworkManager options like wifi.scan-rand-mac-address=yes or wifi.cloned-mac-address=random for NetworkManager results in not being able to connect to a wireless Access Point anymore via nmtui. On the other hand, manually spoofing the MAC address via ip, ifconfig and macchanger and using nmtui afterwards works in all three cases.

Hi , how a start use armbian with banana pi zero h2+ ? For frist i need compile kernel ? Have one article for help with more information ? I need use xfce with rdp desktop, is possible use ? Thanks all help - brasil - pt-br PS : this board : http://www.banana-pi.org/bpi-zero.html

Hi, I started using Lime2 recently. I am using Openwrt with Lime2. I am powering the board using LiPo battery. I could not find a way to find the battery level. I use SSH to communicate with the board. Is there any script or way to find the battery level through SSH. Help please.

I just downloaded the March 26th nightly of Stretch for Rock64. Getting the following error running apt-get update/apt-get upgrade: E: The repository 'http://beta.armbian.com stretch Release' does no longer have a Release file. N: Updating from such a repository can't be done securely, and is therefore disabled by default. N: See apt-secure(8) manpage for repository creation and user configuration details. root@rock64:~# Re-imaged with a new Flash drive and still getting the same issue. Is there a problem with beta.armbian.com tonight? Thanks!

First of all, I'm a complete novice to Armbian so my apologies if any of the following isn't up to the standard of this board. I've just installed Armbian 5.38 stable Debian GNU/Linux 9 (stretch) 4.14.18-sunxi on a Banana Pi. The same computer was previously running a domain controller under Bananian just fine. Installing Samba on Armbian works fine: r oot@Linux08:~# apt-get install samba attr Installing the packets to operate Samab as a DC also works fine: root@Linux08:~# apt-get install winbind libpam-winbind libnss-winbind libpam-krb5 krb5-config krb5-user However, attempting to provision a new Active Dirctory d…

Hi there, I am new to the community, but read it for quite a while. I try to bring my own smart mirror project to life. So far everything runs good and I am pretty impressed with all the efforts you guys put into Armbian. There is one little thing that I can't solve my own (due to limited coding capabilities). The supported resolutions doesn't offer the one supported by my 10,1" Tontec display. It is connected via HDMI and offer a resolution of 1280 x 800px. Where 1280 x 720px work it stretches the content, which makes small copy unreadable. I found several threads where users discussed about this resolution. Would it be possible to make this reso…

An hour a go I powered down my Neo Core 2 and now I can't get it to boot properly. When I hook it to the serial Monitor this is the output. It tries to load the "-fixup.scr" file in the /boot/dtb/allwinner/overlay folder but of course this is not available. With the extfls command I searched the folder and those two files would be available: sun50i-h5-fixup.scr sun50i-a64-fixup.scr The "sun50i-h5-fixup.scr" would be the right one for my processor however why does it choose "-fixup.scr" instead? Here is the boot sequence output: Spoiler U-Boot SPL 2017.11-armbian (Mar 20 2018 - 14:52:25) DRAM: 1024 Mi…

I was hoping for some pointers on this issue I am having while trying to enable eth0 interface on my Pine64 SBC. I am running the following Armbian version: Title: Armbian 5.38.180128 Pine64 Debian stretch next Kernel: Linux 4.14.15 Build date: 28.01.2018 I am able to connect a USB 2.0 to Ethernet adapter without any issues. The problem arises when I try to enable eth0 which is the Native Ethernet port. pine64:/# ifconfig eth0 up SIOCSIFFLAGS: No such device dmesg | grep eth0 gives me the following: xxxxxx.ethernet eth0: Could not attach to PHY var/log/messages shows the following: device (eth0): driver '(null)' does not…

I made a kernel upgrade which was not successful The kernel does not boot up. Unfortunately armbian does not contain a fallback method to load the old kernel. Therefore I need a way to restore the old kernel. I copied a working boot folder from another sdcard which does not work. What did I miss?

Hi, I searched around for any new info on the 3rd USB port (header pins next to the 40pin header) and couldn't find anything new than the 2016 post that found its existance, the rest I found was acknowledgement that the H3 has 3 real USB ports, I am trying to enable this port since it seems it isn't enabled by default even in the latest Armbian, how exactly can it be enabled, the whole script.bin change from 2016 got me confused, is it the usb3host option in armbian-config? Edit, spoke too soon, even though the info is missing actually, it was the usb3host in armbian-config>system>hardware, I had the pins the wrong way, D+ is on the outside. Also w…

Hello! How to fix hdmi overscan for retarded tv, is it possible? H3 OPi + Armbian Stretch Desktop last night's Nightly I tried setting overscan_x/y in armbianenv.txt and u-boot and a display-mode line including them, didn't work. Does it need extra settings, like disabling edid or some order of settings?

Hello, I have been using armbian for a couple of months now developing a small product, and this is my issue... When the OS boots, it gets directly to the Desktop environmet and never asks for a password (unless for a supervisor function form the terminal) I need one of the following options... 1) OS ask for password before let yo do anything on the desktop 2) It boots onto a console and ask for password (then you can manually start the Desktop) Any Help will be apreciated..! Best Regards

I just did a Python 3.6.4 build using all 4 cores, and it handled beautifully. You can see where it switches from a single core for the ./configure into all for cores for the make -j4 altinstall Time CPU load %cpu %sys %usr %nice %io %irq CPU C.St. 21:41:30: 1200MHz 1.00 26% 8% 17% 0% 0% 0% 57.2°C 0/8 21:41:35: 1200MHz 1.24 27% 9% 17% 0% 0% 0% 56.4°C 0/8 21:41:40: 1200MHz 1.22 26% 8% 17% 0% 0% 0% 57.1°C 0/8 21:41:45: 1200MHz 1.21 26% 8% 17% 0% 0% 0% 57.2°C 0/8 21:41:50: 1200MHz 1.27 26% 8% 18% 0% 0% 0% 57.4°C 0/8 21:41:55: 1200MHz 1.25 26% 9% 17% 0% 0% 0% 57.6°C 0/8 21:42:00: …

Hi guys, I Love Armbian mainline as docker host, no problems yet apart from below one. I am Running Orange Pi Zero (first generation), latest Ubuntu mainline, upgraded, latest docker + latest minisatip image 1 USB DVB-C TV stick T230 + latest V4L firmware CPU shoots to 100-ish % for all 4 cores when I try to tune, no picture. Then I found this out by accident : while upgrading the kernel and tuning at the same time : It helps to have more CPU load, so : I made a bash script to load one core 100%, avoiding I/O (htop confirms 100%) And now tuning works : 2 FTA HD channels ( 30Mbps ) looks pretty good. Temp is no problem, CPU o…

I ran "apt-get dist-upgrade" on armbian 8.8 and got 8.10. Then I ran apt-get install linux-dtb-next-sunxi linux-headers-next-sunxi linux-image-next-sunxi Now the system has been busy with Setting up linux-headers-next-sunxi (5.41) ... Compiling headers - please wait ... for four days - since friday morning. The system is actually running make & gcc, with changing PIDs so it really /does/ something. I just wonder how long this is gonna take. Hardware is a Banana Pi Router R1

I don't use any uart port ttyS1, ttyS2, ttyS3 on ubuntu_lxde_desktop_OrangePipcplus_v0_9_1.img os on OrangePiPcPlus board. I Used some software as minicom, gtkterm .. but don't anything happen on TDX, RTX pin. when run command line folow $ gpio readall Help me please.

Hey guys, i installed open media vault on my helios4 as described here: https://wiki.kobol.io/omv/ works like charm =) But now i also want to use nextcloud or owncloud and tried to install it ontop of omv, i followed this guide: https://www.technikaffe.de/anleitung-255-installation_und_konfiguration_von_openmediavault_inkl._wake_on_lan The problem is the nginx Server does not work, i can't access the page in my browser. Anyone here had success installing nextcloud or owncloud?

Where is the linking between the WiFi state and the LED defined? The NEO Core has an inconsistently on LED on the Core/Air image and I believe this to be the bug.

I am running a Plex Media Server on a headless Orange Pi PC Plus with Armbian Ubuntu server. So far I’ve been able to configure fstab on the server to mount the NAS at boot. That seems to work fine. However, the problem I have is when I have a power failure and everthing reboots at the same time, the server boots before my NAS. I then have to ssh in and run “sudo mount -a”. Is there a way to have the server detect and mount the NAS whenever it’s available to the network?

Đồng hồ treo tường Rhythm CMG749NR13 – Sắc anh đào quyến rũ Nhiều người có quan niệm rất sai lầm về đồng hồ treo tường, rằng đó là những chiếc đồng hồ có màu sắc cổ điển, với những con số truyền thống. Với đồng hồ treo tường Rhythm, những người quan tâm đến đồng hồ chắc chắn sẽ có cái nhìn khác về vật dụng thiết thực trong ngôi nhà của mình. Nổi tiếng là tinh hoa thời gian của xứ sở mặt trời mọc, đồng hồ treo tường Rhythm CMG749NR13 mang dáng vẻ bên ngoài vô cùng quyến rũ, đặc biệt có sức hấp dẫn với phái nữ dịu dàng, quý phái. Đồng hồ treo tường Rhythm CMG749NR13 mang sắc hồng đào quyến rũ Vượt ra ngoài những bảng màu đen trắng ha…

# echo plop | logger should show things in tail -F /var/log/syslog After digging a bit: # df -h Filesystem Size Used Avail Use% Mounted on udev 85M 0 85M 0% /dev tmpfs 24M 3.0M 22M 13% /run /dev/mmcblk0p1 15G 1.3G 13G 9% / tmpfs 120M 4.0K 120M 1% /dev/shm tmpfs 5.0M 0 5.0M 0% /run/lock tmpfs 120M 0 120M 0% /sys/fs/cgroup tmpfs 120M 0 120M 0% /tmp log2ram 50M 50M 0 100% /var/log tmpfs 24M 0 24M 0% /run/user/0 # du -lsh /var/log/* | grep M 24M /var/log/kern.log.1 25M …

Hello, I use orange Pi (Armbian_5.38) and would like to know how to us my hp Officejet 4500 G510g-m. I tried pyinstane but get error : Pillow-4.0.0-cp35-cp35m-manylinux1_i686.whl is not a supported wheel on this platform. tried all files. And also tried SANE and my printer is showed with this command: sane-find-scanner but nothing with this one: scanimage -L Thank you!

So I'm seeing this up as a media device for my aunt who has nothing but an old crt TV. So I tried h3droid for user ease, but it's not near stable enough and crashes whenever anything is running any load on the cpu. Retro orange pi gives her a desktop and easy interface for watching movies/tv shows and playing old games. The problem I'm running into is I can't get any media file to play. I get sound but no visuals on Kodi and VLC I've tried converting the files from mkv to MP4, I've tried changing codecs h.264->h.265. I don't know what to do because she will never understand/use a command prompt so I wanted to hook her up with something easy.

hy, i know it's off topic but i don't know where i can put my quesiton. so i have a Bananapi m2 with bananian =>> there are two partition : boot ( mmcblk0p1) and root(mmcblk1) Can i add another root's parition(mmcblk2) and switch between the two root's partition? 'V£ ^‰UÐ?, L _E#Ö D #-------------------------------------------------------------------------------------------------------------------------------- # Boot loader script to boot with different boot methods for old and new kernel # Credits: https://github.com/igorpecovnik - Thank you for this great script! #----------------…

Hello, I am running as usual my orange pi one plus H6 ALL WINNER with ubuntu server and cannot find my exFat HDD on it, it detects the usb but not /dev/sda and cannot mount or access it, yes I tried with ntfs This is what I see (image below), should be 232 GB HDD connected via USB, sata is not an option What should I do?

Hello, I'm trying an installation of Mastodon instance on tinkerboard running with Armbian OS. I follow this topic : https://github.com/tootsuite/documentation/blob/master/Running-Mastodon/Production-guide.md the last command i ran was bundle install -j$(getconf _NPROCESSORS_ONLN) --deployment --without development test it returned me : Fetching: hiredis-0.6.1.gem (100%) Building native extensions. This could take a while... ERROR: Error installing hiredis: ERROR: Failed to build gem native extension. current directory: /home/mastodon/.rbenv/versions/2.5.0/lib/ruby/gems/2.5.0/gems/hiredis-0.6.1/ext/hir…

Hi, Have some H3 boards with the current Armbian level 5.24. Need though Qt5.. Is there any info on how to do this? How to install Qt5 in Armbian? (Might be too easy but for some reason I cannot find relevant info) Christos

i've noticed swap is not being used on my armbian system (in this case, it is a Banana Pi R1). I tried to dig deeper and spent several hours looking into a cause and cannot find any way to resolve. I updated everything yesterday to ensure there was no issue with a known bug in a previous package. $ uname -a Linux raspberrypi 4.9.7-sunxi #1 SMP Thu Feb 2 01:52:06 CET 2017 armv7l GNU/Linux I have my swap located on a 2.5" HD that is attached. It is on the /u01 mounted partition as a swap file. I tried creating a second just to eliminate that is a file issue (using mkswap) and trying to activate it. Both files will activate and show in use, but % swap always r…

A new 4xA53 Amlogic S905 board from FriendlyArm. -> http://www.friendlyarm.com/index.php?route=product/product&path=69&product_id=186 Really interesting.

Hi, I realise the NeoCore is not yet supported, but I hope someone can help me with a problem that I am having using the GPIO as buttons. I would like to use the gpio marked GPIOPA13,P A14, PA15,P A16 and PA2 I think these are used by the UART and SPI - I don't require this functionality. I think I have to modify the fex, I have looked, but do not want to kill my system Isit possible to use those gpio? Can someone point me in the right direction? TIA. J.

Hello, I've not found an Armbian version which states compatibility with Banana Pi M2 Zero. Is there a compatible version? My first guess would be the Banana PI M2. Is that so? I've tryied to search the forum but all I've found is something about compilation. Please help.

I am using ARM Cortex A7 board and had run coovachilli with its internal DHCP server successfully with external and internal splash pages. Now want to run it with external DHCP server that is clients will get IPs from external DHCP server and authenticate via Coovachilli. For example two boxes running coovachilli in it seperately but the client from both boxes will get IP lease from same backend dhcp server while authenticate via its coovachilli respectively. So I have used this config in it: HS_WANIF=eth0 # has address 195.19.214.216 HS_LANIF=eth1 HS_NETWORK=10.2.3.0 HS_NETMASK=255.255.255.0 HS_UAMLISTEN=10.2.3.1 HS_UAMPORT=3990 HS_UAMUIPORT=4990…

Hello, I'm trying to build a image using the amazing auto builder supplied by armbian. In the past I've build kernels and modules for linux running at CycloneV-Devices. I don't need graphic support. If I use the image for a M2 Plus there is a initialization issue at mmc: MMC: SUNXI SD/MMC: 0, SUNXI SD/MMC: 1 Card did not respond to voltage select! mmc_init: -95, time 22 So I'm stuck. Is there a way to get it running by using the auto builder? Using the stock image provided by the manufacturer works. Regards, Sombohan

Hi can anyone help. I've got CSF firewall running on my Helios4 and I keep getting emails saying that rsyslog isn't running. I checked the logs and it seems stuck at this error: liblogging-stdlog[10738]: action 'action 11' suspended, next retry is Sun Mar 11 15:36:43 2018 [v8.24.0 try http://www.rsyslog.com/e/2007 ] Is there any fix for this? Thanks for any help

Hi everybody: I'm having problems to compile a custom user overlay on ARMBIAN 5.38 stable Debian GNU/Linux 9 (stretch) 4.14.18-sunxi. I tried to install linux-headers-dev-sun8i like said on https://www.armbian.com/kernel/, but i receive the folowwing error: Kernel headers are not installed properly. Please install the kernel headers package so, my one option is to install linux-headers-next-sunxi, but as i'm using the stable version the compiled custom user overlay only works if i switch to nigtghly automated builds using armbian-config tool. all help will be welcome. Regards, Mauricio F.

Hello! This thread here: https://forum.armbian.com/topic/3728-varlog-varloghdd/ triggered the question in me how I could extend the log2ram. My problem is the following: I have installed syncthing. The default in armbian runs it as root - which is not recommended for syncthing, see here: https://forum.syncthing.net/t/running-syncthing-as-root/6316! So I downgraded the syncthing daemon to a standard user account "syncthing". In order to enable a non-root user to write logfiles it's common practice to create a subdir /var/log/syncthing/ and give it write rights for syncthing. This works, however my logfiles stay completely empty! Never…

Hi Guys: I have been trying to write a custom overlay to use gpio-poweroff. I'm using ARMBIAN 5.37.180106 nightly Ubuntu 16.04.3 LTS 4.14.11-sunxi. Attached is the gpio-poweroff.dts file that i wrote and even as it compiles with sudo armbian-add-overlay gpio-poweroff.dts and it is added to the last line on armbianEnv.txt like user_overlays=gpio-poweroff, it doesn't work. On boot, it shows: Applying user provided DT overlay gpio-poweroff.dtbo failed on fdt_overlay_apply() FDT_ERR_NOTFOUND Error applying DT overlays, restoring original DT All the other other overlays ilke i2c0, uart3 works perfeclty. Any…

Hi, I downloadded the latest debian_stretch_next for OPZ+2 H5. Yes, I know it's experimental and not production-grade, I just want to report the issue. The problem is that apt-get (dpkg-deb) fails to decompress deb archives during the upgrade procedure. Tried it on a clean install multiple times on different microSDs. Are the packages really corrupted or is there something wrong with the image? Error log in the attachments P.S.: ubuntu_xenial_next randomly panics during apt update. h5.txt

For what it's worth, and one of the most discussed topics can now hopefully finally closed: Mali in mainline Did not try it, but the source is trustworthy to my humble knowledge... Still no open source release, but I guess it silences a lot of people questioning for Mali support! For the real Mali die hards, here is a link to some more background info: Free Electrons

Hello! I followed build instruction from github, builded full OS image to flash to microSD and get kernel oops on boot (selected orangepiwin->dev(4.14.x)->xenial->server) log: https://pastebin.com/G4UtkGPR Possible to fix?

Hi, I use a cubieboard2 and have (due several SD crashes) added a small SSD using the nand-sata-install script. I wanted now to install iptables - but it complains about iptables -nL modprobe: ERROR: ../libkmod/libkmod.c:586 kmod_search_moddep() could not open moddep file '/lib/modules/4.10.12-sunxi/modules.dep.bin' modprobe: FATAL: Module ip_tables not found in directory /lib/modules/4.10.12-sunxi iptables v1.6.0: can't initialize iptables table `filter': Table does not exist (do you need to insmod?) Perhaps iptables or your kernel needs to be upgraded. Checking for the version I get uname -a Linux cubie2 4.10.12-sunxi #…

Hi everybody! Need some help with understanding of some stuff in my Orange Pi zero. I have next issue: I have Orange pi Zero and Huawei4510 3g usb modem. Orange pi do some measurement and send them on server. All this stuff works great.But: my provider have session limitation(3 hours). After 3 hour i lost my orange pi from netework, but i see that 3g modem lighthing as he have connection.When i turn-off modem from usb and plug it again, he lighthing that he catch network, but services doesnt sent data. i'm using wvdial for managing network connection over 3g modem. I have script whitch reload wvdial…

Hello, I am using Armbian 5.25 Linux 8 jessie 3.4.113-sun8i and when I plugged usb grabber with chipset utv007 lsusb shows only 1b71:3002 without name of device. How can I add driver for this device to my armbian? (preferably without reinstalling Armbian) or If I install new version 5.3, will it work out of the box? Thank you!

Can someone please test this img on Orange Pi Lite. 4gb sd card or larger You can use nmtui to connect to wifi Connect to wifi the point browser to port 5000 of the IP address to see if gui starts and doesn't have any issues. http://x.x.x.x:5000 Thank you for your help. login root password octoprint Full instructions here http://www.cnx-software.com/2017/07/11/how-to-use-octoprint-on-orange-pi-lite-board-amlogic-s905x-and-s912-tv-boxes/

Hi, in the NetworkManager the Enable Mobile Broadband doesn't show up? lsusb shows the Huawei USB Stick as modem not as storage so this seems ok? what else can I check? I already tried 3 different sticks :-/ regards Meex

Hi, I recently bought an Odroid HC1 and installed Debian 8 on it. I am being quite happy so far with the installation, however this softy installer is very frustrating. I tried to install Syncthing, which failed to start, then now Webmin, hoping to be of "smaller scale", but no lack. It repeatedly fails to do something, displaying the errors behind the curses window, so I had to stop it with Ctrl-C. Then I got back to the menu and after quit, a cleared screen. Brilliant. Are there logs stored somewhere, at least? I checked /var/log/, but got no further. Or how I am supposed to go through failing installations? Thank you,

I am a newbie in Orange pi or similar Boards. I have only some experience with arduino and similar. On my Windows 7 pc are all my music stored. I want to stream the played music to my local wlan. And receive/play the stream with a OPi. What do i need to stream the played music from Windows? What is the best choice of Orange pi for this? Do i need only one OPi or two (one for send and one to receive)? Thank you for help.

Hi! I'm having trouble with one (only one) of the alsamixer settings. 'MIC1 boost AMP gain control' shoots up to 71 every time I launch a program that uses sound, such as alsaloop or arecord. I've done 'sudo alsactl store', so I can get it back to zero by doing 'sudo alsactl restore'. Obviously that's not something I want to do all the time. I don't have any problems with any other settings. The setting in question completely ruins sound quality for my purposes, so I need it to stay at zero. I'm currently running 5.35 user-built Ubuntu 16.04.3 LTS 3.4.113-sun8i. I've tried Debian Jessie as well.

Hi, I updated from legacy kernel to mainline and then from jessie to stretch. Armbianmonitor -u output is further below. So far, the main issue is that after rebooting the DNS server is set to 127.0.0.1 thus loosing internet connectivity. Here is the output of resolve.conf (with manual setting the nameserver after reboot ) and the static network config. I am struggling to find how the dns server is set after reboot. I would appreciate if anyone could point me to a HOW TO. Minor issues: I can see only one cpu with htop, the ip address is not recognized at the ssh login screen, the opi pc is recognized as opi lite at the ssh login screen …

Hi, I am searching to make a service running automatically at boot. I edited the .bash_profile and I added the command line service. In the OrangePi Pc2 and in the NanoPi Fire3 SOCs the procedure is perfectly working. In Orange Pi Zero Plus2 (with Armbian) this procedure doesn't work. Could you please help me to let start a procedure at boot? Thanks.

Hi, I'm experiencing OragePI PC with Zoneminder for the development of a video surveillance system. It's possible to insert Zoneminder in armbian repository? The update of this important program in automatic mode would be outstanding. Thank you.

Trying to clear boot sequence from errors while building mainline version with following parameters: I found error sunxi-nmi: unable to map resource. After investigation, I found: 1) there is no nmi controller on A64, according to last version of Allwinner A64 manual; 2) nmi is added into DT by patch add-A64-nmi_intc. patch. I created a user patch reversing this patch, but it could be better if this patch is removed from A64 as it is usefull only on other chip. Question: is my opinion on this topic ok? Who is in charge to solve this conflict between me and the guy who added this patch? Mike

While boot "Failed to start Load Kernel Modules." Type systemctl status systemd-modules-load.service and get run systemctl daemon-reload and systemctl start systemd-modules-load.service when systemctl status systemd-modules-load.service but if will reboot, "Failed to start Load Kernel Modules." again! why?

Time_2018/02/26 OrangePI PC2 Armbian_5.40_Orangepipc2_Ubuntu_xenial_next_4.14.15_desktop s problem OrangePI PC2 Armbian_5.40_Orangepipc2_Ubuntu_xenial_next_4.14.15_desktop was downloaded yesterday. It was started and seen once again. Fortunately, language support, they seem to move, it was. 1. fumio@orangepipc2: ~/Desktop$ df -h filesystem size user Avail Use% Mounted on ............... tempfs-root 498M 498M 0 100% /media/root-ro overlayroot 498M 498M 0 100% / ...... ..... tempfs-roo and overlayroot…

Can you please help me to find the used Linux Version? This is the boot output via Serial. I need the Linux Version which is used. U-Boot SPL 2017.05-g64c4ffa (Oct 20 2017 - 15:30:13) DRAM: 256 MiB Trying to boot from MMC1 U-Boot 2017.05-g64c4ffa (Oct 20 2017 - 15:30:13 +0200) Allwinner Technology CPU: Allwinner H3 (SUN8I 1680) Model: Xunlong Orange Pi Zero DRAM: 256 MiB MMC: SUNXI SD/MMC: 0 In: serial Out: serial Err: serial Net: phy interface0 eth0: ethernet@1c30000 Hit any key to stop autoboot: 0 gpio: pin PA17 (gpio 17) value is 1 35424 bytes read in 128 ms (269.5 KiB/s) 4777536 bytes read in 745 ms (6.1 MiB/s) Starting k…

ARMBIAN 5.38 stable Debian GNU/Linux 9 (stretch) 4.14.18-sunxi on Cubietruck If my Wlan-Router is shortly offline and online again, the internal interface wlan0 doesn't reconnect. before: 4: wlan0 Link File: n/a Network File: /etc/systemd/network/40-static-wlan0.network Type: wlan State: routable (configuring) Path: platform-1c12000.mmc Driver: brcmfmac HW Address: 6c:fa:a7:xx:xx:xx (AMPAK Technology, Inc.) Address: 192.168.1.4 DNS: 192.168.1.1 after: ● 4: wlan0 Link File: n/a Network File: /etc/systemd/network/40-stat…

Can someone tell me how to open terminal from keyboard Im using 5.20 legacy. It is giving an invalid format. So i need to virtually press h3disp

Problem of top priority of Armbian_5.40_Orangepipc2_Ubuntu_xenial_next_4.14.15_desktop edition After it sticks to OrangePI PC2 Languege support. I have a favor to ask. All languages by which Languege support is besides English at present. The situation that it can't be used in the following error. org.freedesktop.PolicyKit.Error.Failed: ('system-bus-name', {'name': ':1.85'}): org.debian.apt.install-or-remove-packages In Languege support, Japanese, they seem able to establish it, when it is, the back, Mozc, install. It'll be in order to use it mostly. By this, most users. OrangePI PC2, mostly, they seem able to use…

Hello, I am running an orange pi one plus (H6 all winner). I tried to change partition size as suggested, although nothing working, here is what I tried: fdisk and the commands, with and without deleting old partition then adding partitions, I get an error message at the end when input w, people say to ignore it, although orange pi cannot boot afterwords I tried the instructions on their wiki, nothing works I tried cfdisk which seems to be working, although still when I df -h I cannot see the partition, and when I try to install something for some unknown reason my dpkg gets broken, and says that my mmcblk0p2 is …

I have installed latest armbian desktop version. When I try to preview webglsamples.org, it seam that no hardware acceleration is enabled, webgl. Is there possibilty to install webgl support ? I search forum, and did't find nothing about webgl support for A20. No mather wich browser, just need webgl support to show webgl . Thank you!

I have several Pi3s and two Asus Tinkers. They work well, Tinker is a bet better of the two. Want something fast to use with my 3D print. and Octoprint etc. So want to run CAD software, Slicer etc. and control of my Creality CR-10. - So, I bought OrangePi and had bad initial experience, and boot SW was in Chinese. So I returned it and got their best? The OrangePi 2 Plus. - Should have been better. My experience is it is very very temperamental. I found, and I see others have experience power supply issues. 1. Must make sure the 5V does NOT go below, 5Vs. The average current runs between .5 and .8 Amp. but there are large peaks. I used a 3A raged supp…

Hi Sorry for my poor english... My board is a Rpi+ 2E connected to a Xoro 2442 TV by HDMI. I have installed RetrOrangePi. My problem is : - If I do h3disp -m 1080p60 my image is cropped, I think there are no overscan and I can't configure overscan on my TV ... - If i do : h3disp -m 1080p60 -d I know this is where we have a DVI adapter, but... that's strange : sometimes ... my tv displays (on bottom) : "HDMI 1080p@60", sound is ok, but my image is green. sometimes, my TV displays (on bottom) "HDMI 1920x1080@60" my image is ok (not cropped) but I have no sound ... It's random at …

hey I am new to Orange pi and i don't know a lot about it could you tell me how can I record audio using the on board Mic input in orange pi zero

Hello Pin A18 is HIGH when OPI ONE boots but I want to change OPI ONE pin A18 to LOW. How could I do this?

Hi. I have multiple USB wifi sticks and I would like to be able to connect to my wifi network without having to enter the device mac etc. using nmtui. Is it possible to use wlan0 as the device? Thanks. J.

Hi, I downloaded Armbian 4.14.14 and I installed it on my Banana PI. Then I configured it to act as Gateway/Firewall. Now, just before I start active using it, I wanted to backup the installation on a second SD-card, just in case... I buyed a Toshiba 8GB Class 10 and I started to copy the data from my "old" SD-Card (SanDisk 8GB Class 10), first with Linux using dd, then under Windows using Win32DiskImager. Always the same problem: if I boot the Banana PI with the new card the system boots and, before I get the login screen, the system restarts in a loop... With the "old" card of course it works... Can someone …

Hi all. I want set static ip ethernet and wifi but when i set static ip ethernet. Wifi not working, I can ping to my gateway but can not ping to google. this is my setting: /etc/network/interfaces source /etc/network/interfaces.d/* auto eth0 #allow-hotplug eth0 #no-auto-down eth0 iface eth0 inet static address 192.168.20.233 netmask 255.255.255.0 gateway 192.168.20.1 dns-nameservers 8.8.8.8 8.8.4.4 auto wlan0 #allow-hotplug wlan0 #no-auto-down wlan0 iface wlan0 inet dhcp wpa-ssid "myssid" wpa-psk "mypass"

I run ARMBIAN 5.38 stable Debian GNU/Linux 8 (jessie) 4.14.18-sunxi on an Orange Pi Zero. Cron and its timezone are causing me problems: it's initially one hour out - all root crons run an hour early. If I run dpkg-reconfigure tzdata and set the correct region/place, cron then runs correctly until the next reboot. I can see no difference between the localtime and timezone files before and after the reconfigure (strangely, the localtime link is replaced by a file following a reconfigure - this is different from my other Armbian machines). I can work around the problem as follows: following a start/reboot I then restart the cron serv…

Hello, I have a board similar to the bananapi m3, the main difference is that it has a ram type DDR3 memory instead of a type LPDDR3. If I compile in the following way: ./compile.sh BOARD = bananapim3 The result is: HELLO! BOOT0 is starting! boot0 version: 4.0.0 rtc [1] value = 0x00010000 rtc [2] value = 0x00020000 rtc [3] value = 0x00030000 DRAM DRIVE INFO: V1.0 DRAM Type = 7 (2: DDR2.3: DDR3.6: LPDDR2.7: LPDDR3) DRAM normal_mode value: 00000001 DRAM CLK = 672 MHZ PMU: AXP81X ddr voltage = 1200 mv using ic A83T using axp AXP813 DRAM zq value: 00003bfb initializing SDRAM Fail. Do I need to change the type of memory in the boot0, can …

I want to build an multi thread program. 1 st thread modify the GPIO, and make accurate time for GPIO pulses. (I use WiringPI OP) 2 st thread create anything else. Please write an thread example. I need thread sleep function (for 1 st thread). Expectation in the sleep the OPI CPU load=0%

Hello ...i have a probably "stupid" question but exactly is this pressure switch located on the back PCB of Beelink X2 i know its not the best angle but i guess that everyone that have dissasembled Beelink X2 has saw it...if you have issue recorgnize it i will take a photo (the one here is from a photo i found here) I tried to pull the Beelink out of the box and it wouldn't start....i guess it should be always pressed....

There is a recent Etcher.io bug in Linux https://github.com/resin-io/etcher/issues/1955 causing errors writing images. While we're hoping to release Etcher 1.3.1 soon, but as a temporary workaround you can do to manually downgrade to 1.2.1 : sudo apt-get remove etcher-electron sudo apt-get update sudo apt-get install etcher-electron

does anybody know how can i enable the spdif output using debian stretch 9.3 odroid n-1 3399 any help appreciated

is there going/any armbian image for the N-1 odroid and if not will there ever be..was looking at giving that a go if i can find one..thkx ..phase

I'm trying to follow the instructions for ubuntu, but I do not have success. I added the script /etc/init.d/, executed sudo chmod ugo + x /etc/init.d/script.sh, and then executed sudo rc-update add script.sh, but got the output: sudo: rc-update: command not found. What do i do?

Does it make sense? I would like to use the mainline armbian kernel on a custom minimal Buildroot image to use on a orange pi zero. Buildroot because of its lightness and armbian because it has Opi audio drivers and codec that doesn't seem to be included in Buildroot default kernel. If this is possible, could you help me with the configuration of Buildroot to use armbian as kernel?

I download Mozilla IOT, then i send yarn command my orange pi pc2 is frozen... I reboot it, but pipc2 now in cycle reboot. Console log: U-Boot 2017.11-armbian (Jan 30 2018 - 17:36:47 +0100) Allwinner Technology CPU: Allwinner H5 (SUN50I) Model: OrangePi PC 2 DRAM: 1 GiB MMC: SUNXI SD/MMC: 0 *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: phy interface7 eth0: ethernet@1c30000 starting USB... USB0: USB EHCI 1.00 USB1: USB OHCI 1.0 scanning bus 0 for devices... 1 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found Autoboot in 1 seconds, press <Space> to stop switch to partitions #0, OK mm…

apt-get install python3-pandas Reading package lists... Done Building dependency tree Reading state information... Done Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: python3-pandas : Depends: python3-pandas-lib (>= 0.19.2-5.1) but it is not installable E: Unable to correct problems, you have held broken packages. Any suggestions?

I can not find the tvheadend softy? version Armbian_5.38_Bananapi_Debian_stretch_next_4.14.14.7z

Is there a way to set GPIO pin modes and values (much) earlier than a script running in /etc/init.d/ ?

hi every body i want connect fingre printer model r301 to connect orange pi lite . i connect TX fingere printer to TX orange pi lite TX(pin8). and connect RX fingere printer to RX orange pi lite RX(pin10). how can i read data ?and write data? i am new in this feild. please help me!!!!!!!!

ı have a lcd as ' http://s.aliexpress.com/NjiyQFvE ' . I do all the connections correctly but the LCD screen does not appear. At first, a white light comes out on the screen. I could not find a manual or guide about this LCD. How can ı chane the resolution as http://www.orangepi.org/Docs/LCDModule.html

Dear all, so after switching from bananian to armbian around half a year ago, I've made several updates to the bananapi server running. As the prototype server is still running with bananian, some problems just occured as I am now testing a fresh install of my web-package, including nginx, mysql, php7 / laravel and some other stuff. So what I realized was that the database, even on a fresh install, is extremely slow. I thought the newer setup with debien stretch and mariadb 10.1+ might be the problem, yet running the same on the older armbian jessie build did not change anything. I also set up a fresh virtual machine running debian stretch with two cores,…

At this point upgrade is ready only for advanced users. Repository: apt.armbian.com Key: http://apt.armbian.com/armbian.key Add to sources if not there: deb http://apt.armbian.com $(lsb_release -cs) main Packages naming logic for apt-get install: I. Kernel 3.4: Deprecated linux-u-boot-DEVICE_NAME-default (cubieboard, cubietruck, lime, ...) linux-image-sunxi (all) or linux-image-banana (for boards bananapi, orange, lamobo r1) linux-headers-sunxi or linux-headers-banana (for boards bananapi, orange, lamobo r1) linux-firmware-image-sunxi or linux-firmware-image-banana (for boards bananapi, orange, lamobo r1) linux-$(lsb_r…

Hi, all, sorry to bother you again. I still cannot make wifi on my OPi Plus2 work. The following are the results of ifonfig and iwlist scan . and my /etc/network/interfaces is as follows: What's in file /etc/wpa_supplicant/wpa_supplicant.conf : network={ ssid="xxxxx" psk="yyyyy" } and I'm sure the SSID and password are correct. I used to posted a mesage about WIRED connection, which is solved by setting hwaddress ether . However, for wireless connection, can anybody give me hand please? Thank you very m…

Hello. I have "Debian GNU/Linux 9 (stretch)" on CubieTruck. After installing Apache2 i get problems with /var folder (that is symlink on hdd folder). Apache2 dont see files in it. So i print stat for this folder from commandline and from php in Apache. That is from command line: root@cubietruck:/mnt/var/armbian/apache2/www/html# stat /mnt/var/armbian/var File: /mnt/var/armbian/var Size: 4096 Blocks: 8 IO Block: 4096 directory Device: 801h/2049d Inode: 2097154 Links: 13 Access: (0755/drwxr-xr-x) Uid: ( 0/ root) Gid: ( 0/ root) Access: 2018-02-10 14:35:14.025501481 +0300 Modify: 2018-02-04 09:1…

Hi all, I am new to linux and SBC. I have installed armbian on banana-pi M1. I want to setup a NAS and Media server for my home network. I am trying to install Openmediavault using armbian configuration as documented in the article here. But I am unable to see the openmediavault under Softy. Is there anything I am missing here. https://docs.armbian.com/User-Guide_Armbian-Config/#software Any help will be really appreciated.

Hi: I used the following command ./compile.sh BOARD="orangepiplus2" BRANCH="next" KERNEL_ONLY="no" KERNEL_CONFIGURE="no" BUILD_DESKTOP="no" to successfully built an image out: I then use the following command line: dd bs=4M if=Armbian_5.40_Orangepiplus2_Debian_stretch_next_4.14.17.img of=/dev/mmcblk0 conv=fsync to write my SD card successfully. However, when I put this SD card into my Orange Pi Plus 2 v1.1 and boot, I obtained several pages of ERROR messages, as in the attached images. Can anybody give me a hand please? Cheers Pei

alright thanks @edupv Oh, and one another problem that bugs me once every one or two week in armbian 5.27, but in 5.40 it's almost everyday, The UASP stopped responding requests, it freeze entire system for several minutes, and every I/O to my hard drive makes the OS unresponsive. I was using ASMedia ASM1153E a years ago, and it show much problem. So I switch to JMicron JMS578, which doesn't error as often like ASMedia 1153E. I already read here (http://linux-sunxi.org/USB/UAS) and found out both ASM1153E and JMS578 is listed as OK right now. below is dmesg output when it started to freeze when I'm copying a file from my PC to…

Just after writing the image on the SDcard, I start tuning rc.local and crontab. I have found that crontab is not run before first authentification; this is an issue, because I use crontab to handle my networking; and without networking, I can not know the IP of the pi, and I can't login. I have found that after first authentification, I am asked to change the root password, then I see /etc/update-motd.d/99-point-to-faq, then /etc/profile.d/check_first_login.sh (which includesuser account creatino), but not /etc/update-motd.d/41-armbian-config After second authentification, I can see /etc/update-motd.d/41-armbian-config and /etc/update-motd.d/99-po…

Hello- I'm looking to marry free and open (as possible) software and hardware into one inexpensive system. I'm in over my head so apologies in advance if I'm asking silly stuff. I did check the basics on here and have been lurking. At any rate I've been messing around with the Lime 2 and haven't had much luck getting Parabola to boot into LXDE... or any GUI at all actually. I thought I'd try Armbian as the Debian Kernel has been blob-less for a while now. I really, really like it so far. I am using Mainline, just want to make sure I'm running all free software if possible. I have checked for non-free stuff via: dpkg-query -W -f='$…

Hello, I just installed Armbian on my Tinker board. I use the internal wifi and another wifi usb dongle (static ip). The wifi usb receives a name wlx**** in ifconfig and the internal wifi module has wlan0. I want to have wlan1 instead of wlx***. So I checked https://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames/ Tried the option using dev/null and setting the net.ifnames parameter. I tried in /boot/ArmBianEnv.txt to set net.ifnames=0 parameter. Nothing works. Would be happy, if someone knows how to change this on Armbian. Thank you very much

This is bazel 0.10.0 for H3 device like: nanopi m1, nano pi neo, orange pi pc, orange pi one,... You'll need this when building tensorflow from source for our H3. Copy this file to /usr/local/bin to use it. Sorry for my bad English Bazel

Hi, guys. I need some help in understanding of usage AR100 (OpenRISC) coprocessor inside H3 SoC for the own real-time tasks. Now i'm using mainline kernel built with RT-PREEMPT patch. I'm using it with Machinekit (LinuxCNC) software to control stepper drivers/motors via GPIO step/dir pulses. But step pulses frequency is too slow (about 17 kHz) because the RT kernel latency is about 30 us. I think we can use the built-in coprocessor for the realtime GPIO toggling. The AR100 and main Cortex-A7 can talk to each other with built-in MSGBox. And the question is - how to launch my own firmware on the AR100 core?

Hi. I try to start Apache2 in Armbian. If i use 'apache2ctl -k start' then everything is ok. root@cubietruck:/etc/apache2# apache2ctl -k start AH00558: apache2: Could not reliably determine the server's fully qualified domain name, using ::1. Set the 'ServerName' directive globally to suppress this message root@cubietruck:/etc/apache2# But when i try to start it as systemd i get error. root@cubietruck:/etc/apache2# apache2ctl start Invoking 'systemctl start apache2'. Use 'systemctl status apache2' for more info. Job for apache2.service failed because the control process exited with error code. See "systemctl status apache2.service" and "journalctl -xe"…

On Xenial A64 I added an entry for a LUKS partition into /etc/crypttab (after installing cryptsetup which added its stuff to uBoot). But at boot I don't get asked for a password If I add a timeout in crypttab, boot continues with a rescue console, if not it hangs forever. Other than that I have no clue what's going on, journalctl only shows "systemd-cryptsetup failed, status 1" obviously because no password was given. I also added dm-crypt to modules and called update-initramfs, but that didn't change anything