Allwinner sunxi

I have a problem with NEO2 and EDIMAX EW 7822ULC. I can't see none of my 5GHz network SSID, but I can connect to 2.4 GHz. I am using Buster minimal image. It is something I should do to solve this problem? Thank you.

% cat /etc/armbian-release # PLEASE DO NOT EDIT THIS FILE BOARD=zeropi BOARD_NAME="ZeroPi" BOARDFAMILY=sun8i BUILD_REPOSITORY_URL=https://github.com/armbian/rkbin BUILD_REPOSITORY_COMMIT=3e533c9 DISTRIBUTION_CODENAME=buster DISTRIBUTION_STATUS=supported VERSION=20.02.1 LINUXFAMILY=sunxi BRANCH=current ARCH=arm IMAGE_TYPE=stable BOARD_TYPE=conf INITRD_ARCH=arm KERNEL_IMAGE_TYPE=Image # dpkg -l | awk '{print $2" "$3}' | grep -Ei "^linux|zeropi" | sort linux-base 4.6 linux-buster-root-current-zeropi 20.02.1 linux-dtb-current-sunxi 20.05.0-trunk linux-image-current-sunxi 20.05.0-trunk linux-libc-dev:armhf 4.19.98-1+deb10u…

Hello, Trying to figure out to get bluetooth working on Cubietruck with Armbian Buster mainline based kernel 5.4.y Installed all software but bluetoothctl keeps telling me there is no default controller. Seems to me the drivers are not loaded/activated. Is this supposed to work or m i trying to fix someting unfixable. Please bump me in the right direction.. Tjabks!

I've got a Sony RX100VA camera that I want to connect to the NanoPi Neo2 running Armbian Buster. On the Camera I can select the type of USB connection: -Auto -Mass Storage -MTP -PC Remote My intention is to use the PC Remote connection for use with gphoto2, this works fine on a PC with Ubuntu 18.04, but when I connect the camera to the Nano Pi Neo2 with Armbian, the camera display shows connecting (but doesn't connect). I suspect a bug in the OS, but I am unsure how to find it. lsusb gives the following report with an error: can't get debug descriptor: Resource temporarily unavailable root@nanopineo2:~# lsusb -d 054c:0cb2 -v…

How can we create a custom image of Armbian Bionic/Buster for Orange Pi Zero with our customized application/code in it. Please suggest process for the same.

Hello, I've been trying to install Raspotify on my NeoPlus2. While it seems to be install OK, I can't find my device available in the list of Spotify-connect capable devices. journalctl -u raspotify reports: gtj@nanopineoplus2:~$ journalctl -u raspotify -- Logs begin at Mon 2020-05-04 02:26:25 UTC, end at Mon 2020-05-04 02:43:52 UTC May 04 02:26:32 nanopineoplus2 systemd[1]: Starting Raspotify... May 04 02:26:32 nanopineoplus2 systemd[1]: Started Raspotify. May 04 02:26:32 nanopineoplus2 librespot[963]: [2020-05-04T02:26:32Z INFO libre May 04 02:26:33 nanopineoplus2 librespot[963]: thread 'main' panicked at 'called May 04 02:26:3…

Armbianmonitor: http://ix.io/2g5I I recently started playing around with OrangePi Zero with the Allwinner H2+ CPU. I want to test out the internal audio DAC. To do so I enabled "analog-coded" in armbian-config. After rebooting I saw a new audio device in the output of "pacmd list-cards", but it says that only mono is available. How can I configure stereo sound? I haven't played around with "/etc/asound.conf" much as I don't understand it. Also, I don't have anything plugged into the audio pins on the GPIO.

I've just installed latest minimal image (https://dl.armbian.com/bananapipro/Buster_current_minimal) and found some issues: Doing apt-get update results in: 30 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. Need to get 0 B/49.8 MB of archives. After this operation, 618 kB disk space will be freed. Do you want to continue? [Y/n] Preconfiguring packages ... dpkg-deb: error while loading shared libraries: dpkg-deb: unsupported version 0 of Verneed record dpkg: error processing archive /var/cache/apt/archives/base-files_10.3+deb10u3_armhf.deb (--unpack): dpkg-deb --control subprocess returned error exit status 127 I fixed this by using an old dpkg-…

1-Wire works, I put the explanation at the end of this post. Hello There, yesterday I burned a fresh image of Armbian_20.02.5_Bananapi_buster_current_5.4.26 to replace my current setup (Armbian_5.91_Bananapi_Debian_buster_next_4.19.59) and I run into some trouble with 1-Wire. I tried everything I knew and found on the web but 1-Wire still won't work. So I need some help. My hardware setup was not changed and it worked for at least two years. So would rule out a wiring problem at the moment. My SoC is a Banana PI M1 ( http://www.banana-pi.org/m1.html ) The strange thing is, that 1-Wire wont come up by itself, I have to run mo…

Hi, i use orangepi lite with armbian buster and kernel 5.4.35 my journal flooding with messages: May 02 09:50:11 orali kernel: RTL871X: CurIGValue=31, EntryMinUndecoratedSmoothedPWDB = 30 May 02 09:50:13 orali kernel: RTL871X: CurIGValue=31, EntryMinUndecoratedSmoothedPWDB = 31 May 02 09:50:15 orali kernel: RTL871X: CurIGValue=31, EntryMinUndecoratedSmoothedPWDB = 32 May 02 09:50:17 orali kernel: RTL871X: adaptive_early_32k(): bcn_cnt = 101 May 02 09:50:17 orali kernel: RTL871X: CurIGValue=31, EntryMinUndecoratedSmoothedPWDB = 31 May 02 09:50:19 orali kernel: RTL871X: CurIGValue=31, EntryMinUndecoratedSmoothedPWDB = 32 May 02 09:50:21 orali kern…

I want to create an image file with yocto. There is no orangepilite in the link "https://github.com/linux-sunxi/meta-sunxi" . I created an image file for orangepione. kernel did not stand up. then I downloaded the metalayer in the link https://github.com/abradianu/meta-orangepi/. I made the following changes. ../conf/local.conf/ MACHINE ??= "orangepi-lite" ../conf/bblayers.conf /home/e2das//Desktop/yocto/poky/meta-orangepi \ then I ran the bitbake core-image-base ERROR: /home/e2das/Desktop/yocto…

Hi to all. Is it possible to write tmp video files to zram. Im using Opi Pc as A video recorder. And would like to write files to zram. Zram mounted to /var/log/. Im writing to /var/log/motion. Is it A good way? Latest armbian. Thank you.

Hi Yesterday after installing weewx I uninstall python 2 but well.... something went wrog because there was no welcome screen login with ssh. I've managed to install armbian-config and everything is right again except the release has changed from Orange Pi PC to xt-q8l-v10 Any hints to roll back to the former release ?? I've attached armbianmonitor url Thanks in advance

I want to control a fan via a script. I found a bunch of tutorials for pwm, but they were either for older version of Armbian, or for another board. I could not find a tutorial for Allwinner H6 boards. Apparently simple overlays=pwm doesn't work anymore. Anyone have any pointers as to how to go about it? my goal is to do something like $ ./setfan.sh 50 Setting Fan Duty Cycle to 50%... Nothing more complicated. I have a 5V fan for the system and I just want to tune how fast it should run - now it's going full 100% and it's louder than I'd like. I planned to do this with a trimmer but because the world situation and distances, the trimmer…

Hello, I have a OrangePi Zero+2 board and I am using i2c ports for connect several devices. Some i2c works OK. But I requiere r-i2c port. But the port does not work I have spend several days trying to make it works. Please, Can somebody help me?. This is turning into a headache. Thanks in advance.

WiringNP does not work on NanopiDuo2, both in 18.04 and Ubuntu 20.04 Error piBoardRev: Unable to determine board revision from /proc/cpuinfo -> Is not NanoPi based board. -> You may want to check: -> http://www.lemaker.org/ open /sys/class/su Armbian /proc/cpuinfo content: processor : 0 model name : ARMv7 Processor rev 5 (v7l) BogoMIPS : 136.80 Features : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm CPU implementer : 0x41 CPU architecture: 7 CPU variant : 0x0 CPU part : 0xc07 CPU revision : 5 processor : 1 model name : ARMv7 Processor rev 5 (v7l) Bo…

I'm running a web cam on a OrangePiOne. For the last four days its been performing adequately, at least as well as the RaspiPiZero. At the moment though its suddenly decided to become a snail... slower than paint drying or melting blanc mange. So here I am looking for pointers. I don't have a lot of detail, but what I have follows. I'm using mjpg-streamer to handle the webcam. In the past this has been rock solid without issue, at this point I assume its not the problem in itself. Architecture: armv7l Byte Order: Little Endian CPU(s): 4 On-line CPU(s) list: 0-3 Thread(s) per core: 1 Core(s) per so…

Hi everybody and thanks the armbian team for your work. I'm owning a SOPine module (SOPine-A64-Rev C) with a SOPine Baseboard (Model A Rev B), with the 16Go eMMC module sold by Pine64. I tried these builds with the same issue: Armbian_20.02.1_Pine64so_buster_current_5.4.20.img (All the provided logs are from this build) Armbian_20.02.1_Pine64so_bionic_current_5.4.20.img Armbian_19.11.6_Pine64so_buster_current_5.4.7.img I tried at first to write the image direclty to the eMMC before noticing it wasn't the right way to do => I removed all the partitions from the eMMC. When writing the image to the microS…

Hi, Did anybody play with Cedrus on the recent kernels? I'm going to play with it on Bananapi m1, kernel 5.4 and Ubuntu Bionic. Should I just got step-by-step using this instructions http://linux-sunxi.org/Sunxi-Cedrus ? The goal is to evaluate whether this is suitable solution for video surveillnace. I'd used kerberosio with an IP camera for couple years and this does not work good with motion detection.

Hello! Here's the outputs: $ uname -a Linux opi3 5.4.28-sunxi64 #20.02.7 SMP Sat Mar 28 17:25:10 CET 2020 aarch64 GNU/Linux $ sudo aplay -l **** List of PLAYBACK Hardware Devices **** card 0: allwinnerhdmi [allwinner-hdmi], device 0: 5091000.i2s-i2s-hifi i2s-hifi-0 [5091000.i2s-i2s-hifi i2s-hifi-0] Subdevices: 1/1 Subdevice #0: subdevice #0 ...and that's all! There's no second card. I tested HDMI sound with my TV -- works fine, sound plays. But I need to use 3.5mm jack. Is it physically damaged? Or what could I do? Help, please!

Hi, I would like to configure my nanopi Air as an AP and facing some issues. I have edit my /etc/network/interfaces as follow to use hostapd # interfaces(5) file used by ifup(8) and ifdown(8) auto lo iface lo inet loopback auto wlan0 iface wlan0 inet static hostapd /etc/hostapd.conf address 192.168.1.1 netmask 255.255.255.0 and I have linked the the hostapd.config config file in the /init.d/hostapd. my hostapd.config is as below ssid=AERS interface=wlan0 hw_mode=g channel=5 driver=nl80211 logger_syslog=0 logger_syslog_level=0 wmm_enabled=1 wpa=2 preamble=1 wpa_passphrase=aerstest wpa_key_mgmt=WPA-PSK wpa_pair…

I'm trying to make a master image to install to some NanoPI Neo boards. I have everything running fine from micro SD card. I used armbian-config to flash from SD to the eMMC and it boot and works. Now I'm looking for a way to flash the eMMC from command line in an automatic fashion, after looking for other threads in the forum I found about command nand-sata-install but it has a GUI and no --help parameter, so I guess it is not the exact program I have to use. I tested using dd command to copy the disk, but since there is this u-boot thing I think it is not just a standard disk copy because it failed (maybe my problem). My final idea is to have a master SD …

Good evening, In your opinion, what is the best alternative to the NanoPi NEO2? I don't need wifi or sata. I'm looking for a stable and qualitative armbian with a gigabit and usb port. Is there a better performing armbian that the NEO2 has for less than 40$? Thanks

Hello, I installed Ubuntu Bionic on sdcard and run Kodi on OrangePI but it seems very hot and hang out to reboot every 5mins. Do you encourter the same problem? And how to install Ubuntu into eMCC?

Armbian 5.90 stable Ubuntu bionic Orange Pi PC The Login Screen is very broken and after login, the Screen wents black and only the mouse Pointer is to see.

Hi, I am trying to boot image Armbian_20.02.1_Nanopi-r1_buster_current_5.4.20.img, without success ... First, i am using following line to create SD ... ansible@solo:/mnt/backup$ sudo dd if=./Armbian_20.02.1_Nanopi-r1_buster_current_5.4.20.img of=/dev/mmcblk0 bs=1M status=progress ;sudo sync After connected my tty on internal pins on PCB, it is possible to connect to this tty and look at the first u-boot log ... Welcome to minicom 2.7.1 OPTIONS: I18n Compiled on May 6 2018, 08:02:47. Port /dev/tty-target-srv-nanopir1-170-position-1.2.4.1, 20:34:41 Press CTRL-A Z for help on special keys U-Boot SPL 2019.10-armbian (Feb 17 2020 - 06:18:08 +0100) …

Hello community, I'm looking to build an internet cube (https://internetcu.be/). Basically, the project uses an A20-OLinuXino-LIME2 but I'm looking to see if a better armbian could do the job. Prerequisites are quite similar to a NAS : quality, stability, performance, minus 80$, Gibabit LAN, SATA, USB. So I have 4 models in mind: - Banana pro - Banana pi - A20-OLinuXino-LIME2 - Espressobin Which one is best suited and/or do you have other models in mind?

I run Armbian 20.02.1 stable on a zeropi which is used as a wireguard server and spotify direct client (USB to external DAC). Things run very well. Many thanks to everyone involved in keeping Armbian such a great distro! I noticed that when I turn on the ondemand governor the system becomes very unresponsive and music playback is stuttering. When I use the performance governor (even with min and max frequency both set to 480MHz) things run just fine. Most of the time 480MHz will be sufficient, but it would be nice to be able to take advantage of the ondemand governor. Any help is greatly appreciated.

Hello, I have problem with "Orange Pi Zero Plus" and functionality of Relay module (electrical circuit= normally closed). Relay module is attached on pin/port number "0". When I set up pin number "0" from "OFF" to "OUT" state with command: gpio export 0 out state is changed from OFF to OUT and parameter in column "V" is "0". It should mean that relay stays turned of. +------+-----+----------+------+---+ | GPIO | wPi | Name | Mode | V | +------+-----+----------+------+---+ | 12 | 0 | SDA.0 | OUT | 0 | Problem is, that relay immediately after execution of mentioned command enables(turns on) output electrical circuit. Relay m…

Welcome to Armbian Bionic with Linux 5.4.20-sunxi This is the thing I have installed... I'm trying to use the serial ports out of the GPIO header, nominally pins 8 and 10 which depending on what you read maybe ttyS1 or ttyS3. Out of the box whatever they are they're not available. After much googling, I've seen stuff about FEX and DTS none of which mean much to me, I'm guessing Bionic doesn't use FEX as there's no sign of .FEX or .BIN files in the /boot directory. The default state seems to pump garbage out the tx line whatever its doing. Minicom promises to talk to any ttyS? I give it, but theres no answer on loopback, And that's all I have. …

it appears the pins on the esp8266 12e are also on the orange pi one. Can I connect the pins to an armbian orange pi one and then test the esp8266 12e? I want to test if wifi works. Is required software present in armbian? Or should I get an usb adapter https://ae01.alicdn.com/kf/HTB1pm33XifrK1RjSspbq6A4pFXaf.jpg?width=1000&height=1000&hash=2000 and utilize a x86 gnulinux computer? It says the esp8266 12e supports i2c. Does the orange pi one have i2c pins, such that I can test the wifi of the esp8266 12e from an i2c connection on the armbian orange pi one? Is required software present in armbian? Thanks.

Hello, Wish a good health everyone nowadays! I'm using Orange Pi PC Plus with small aluminium heatsink running Armbian Buster (mainline kernel 5.4.y). SD Card is Samsung EVO Plus 32gb. The CPU governor was set to 480 to 1200, conservative. The system are fresh, just after install. After ~5 minutes of idle uptime temperature comes to 85 and up. Is that heatsink are not good enough? And the second issue I've faced - too quiet sound output from AV-out. The most quiet is Chromium, it is nasty quiet. Sound from local video files in mpv player are bit(2 times) louder both from mp4 and webm, also mp3. Have not tested HDMI(because my…

I remember that the maximum frequency was 1296Mhz back with Xenial, with kernel 3.x. It even says here Heat is not a problem since i have a large heatsink and temperature controlled fan, i was just curious about why the max frequency was bumped to 1368Mhz on the newer builds. What's the rationale behind it?

Hello, I have a NanoPi Neo Plus 2 I used to run Ubuntu Core on it but i wanted to switch out as i had less storage space available 4.7gb out of 8 and other issues as it was also out of date. I installed Armbian first on SD then on eMMC but the problem i am facing is that only 479mb of ram is available. Now in the first post on this board by Stanislav Sinyagin on July 18, 2017 it was stated that only 512 mb of ram was available but later on i saw posts of people with the whole 1Gb of ram being used. Due to the limited ram i get compilation problems among other things i am using this board headless as a server. i flashed all versions for download multiple times along with t…

Hi, We've built a network experimentation system using NanoPi R1 modules, but when load testing the system with iperf3, we are seeing the on-board RTL8152 interface enter a state where it does not seem to be responding until the board is power cycled. The system consists of 32 NanoPi modules connected in a torus, with the 1Gig interface connected to its neighbour's 100Mbit interface. An additional USB Ethernet dongle functions as a control interface. The modules are powered from a Ubiquiti PoE switch, using this type of isolated PoE splitter. Eyeballing the switch UI, power consumption per node seems to hover between 2.3W-3.5W, depending on load. W…

hi good night i have an orange pi lite, i want to use the (lcd ili9341 3.2 model MSP3218) touch screen and how the installation connections i don't know are correct in these connections in gpios and why my pc broke and qr use orange as desktop i need your help. I will be grateful. I want to connect to the retrorange pi 4.2 system how do I install lcd 3.2 on orange lite? https://mobile4dev.blogspot.com/2017/09/orange-pi-pc-tft-ili9341.html?fbclid=IwAR2h4HLkaBtLA7W5cfXobFbvFkZory0Wznvnju6fMrYzOcDVe1k7oBTwwRw

Hello, I am using OrangePi Zero v1.1 board with 512MB DRAM and 8GB Class4 microSD card. I am trying to flash Ubuntu 18.04 LTS downloaded from Armbian site .. Everything goes well till the login point and then suddenly nothing moves. PS - USB adapter 5V, 1.6 Amp rating FTDI converter std. connected to UART of the board. Heatsink mounted on top of the IC. Please Help resolve the possible issue. Thanks !! Rajat Below is the boot up process as captured. U-Boot SPL 2019.04-armbian (Nov 18 2019 - 23:36:05 +0100) DRAM: 512 MiB Trying to boot from MMC1 U-Boot 2019.04-armbian…

I cannot get the screen to rotate 90 or 270 degrees. Inverting it works like it should, but not "sideways". uname -a: Linux orangepilite2 5.4.20-sunxi64 #20.02.1 SMP Mon Feb 17 02:37:37 CET 2020 aarch64 GNU/Linux xrandr --version: xrandr program version 1.5.0 xrandr Screen 0: minimum 320 x 200, current 1024 x 768, maximum 8192 x 8192 HDMI-1 connected 1024x768+0+0 (normal left inverted right x axis y axis) 0mm x 0mm 1024x768 60.00* 800x600 60.32 56.25 848x480 60.00 640x480 59.94 /etc/X11/xorg.conf.d/01-armbian-defaults.conf: Section "Monitor" Identifier "Monitor0" Option "DPMS" "false" Option "Rotate" "right" EndSection Section "Server…

Hello, I have read a lot of posts, but I can't control the gpio pins on my orange one+ (Armbian buster-Linux 5.4.28-sunxi64). Currently I open/close the gate and other doors of my home through my Rpi 2 gpio and a 8 relay module, I would like to replace this with the opi, but I can't find the way. Could you help me? Thanks, Marco

Hi team, I am trying to get a voltage drop (3.3V to about 0V) detected on a GPIO pin on my OrangePi Zero running Armbian buster 20.02.1 with Linux 5.4.31-sunxi. I have another OrangePi Zero on which I have already managed to install I2C OLED screen, and the i2cdetect was working, and so on... For this one, I got a problem with the gpio group not existing. As I tried to install OPi.GPIO, I got usermod: group 'gpio' does not exist It's an Armbian version that I downloaded yesterday, and upgraded today with armbian-config. So... What did I do the wrong way? Thanks.

I am changing the file/folder permission using chown but is it not permanent chown proxy:proxy a.log ls -l total 0 -rw-r--r-- 1 proxy proxy 0 Apr 10 07:30 a.log Now after some time that include reboot ls -l total 0 -rw-r--r-- 1 root root 0 Apr 10 07:30 a.log I am using armbian on orange pi zero plus uname -r 5.4.14-sunxi64

Hi everyone. I almost gave up while reading tons of forums:( I bought CO2 sensor MH-Z19 from aliexpress. As I figured out this sensor used by RPi without any problems. Manual I found here: https://www.circuits.dk/testing-mh-z19-ndir-co2-sensor-module/ I connected module as mentioned: Vin - 2 pin gpio GND - 9 pin Tx - 13 pin Rx - 11 pin Module was blinking when I powered on my OPi, but when I tried to send data to UART nothing happened. I got timeout. I tried to connect Tx and Rx (11 and 13 pin) by cable, then sent bytes and immediatley got answer, UART work, as I understood. I checked uart in armbian-config menu and all (…

Hi, We are using an Orange PC Plus with Armbian Orange Buster OS. Connected to the 40-pin header is Pi-Supply LoRa Node pHAT. We are having trouble commumicating with the LoRa module. We occasionally can get partial messages. The OS reports no errors with the UART. Any suggestions? Thanks frank

Hello, please tell me how I can configure the processor on my Orange Pi Zero to the maximum frequency and voltage, as well as how to do SWAP and register it at startup, I use active cooling radiators and a cooler, I am warned of a possible failure, thank you in advance!

Dear friends. I am trying to initialize my opi lite 2 without success. I'm using a power source, that's ok! I measured the voltage on the RX pin and I have 3.2v. The TX pin at very low voltage. I used a TTL / USB converter to check the debug ttl, but nothing appears. I configured the converter to 3.3v. Can anyone give me any tips on what to do or can I throw the board away already?

Hi, usb and emmc is not working for the A64-OLinuXino-2Ge8G-IND board while using the armbian build in dev. Armbian_20.05.0-trunk_Lime-a64_buster_dev_5.5.15 No change to the config of kernel, choosing lime-a64 and no desktop when asked to by compile.sh When compiling, the only choice for lime-a64 has the description: A64 quad core 1GB RAM SoC GBE eMMC Wi-Fi/BT. That doesn't correspond to the A64-OLinuXino-2Ge8G-IND. The image provided by olimex is working, ftp://staging.olimex.com/Allwinner_Images/a64-olinuxino/linux/1.latest_images/buster/images/ but when compiling their build i have the same issue and i…

Hi, I am fairly new to the SBC board and struggling to begin my setup of the NanoPo NEO Air. This little board is a perfect fit for my project I need to develop. The first problem I encounter is the following: There are no HDMI port. Thus I can't do the basic configuration for my network and allow an SSID access. Does anyone has a solution to preconfigure the WIFI of my Armbian from windows (or Linux if needed)? My second problem will be: I would like to install my system on the EMMC flash to not be dependent of the SD card. Can you confirm I would only need to run the command "nand-sata-install" when I will get…

Hi, I use OrangePi PC as my home samba server, as well as dlna server. It works from hdd, since I made a command nand-sata-install. I want to change the disc for a bigger one, how can I do this? If I will make rsync with all hdd will it be enough?

HI, I have a orange pi zero + with a NAS board (orange pi zero nas) with a msata ssd (kingspec 64 Gb): But armbian don't releave msata device, because with fdisk command I have: fdisk -l Disk /dev/ram0: 4 MiB, 4194304 bytes, 8192 sectors Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk /dev/ram1: 4 MiB, 4194304 bytes, 8192 sectors Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk /dev/ram2: 4 MiB, 4194304 bytes, 8192 sectors Units: sectors of …

while updating my dev-OPiOne Welcome to Armbian bullseye with Linux 5.5.8-sunxi package bsp-kernel[20.05.0-trunk] u-boot[20.05.0-trunk] dtb [20.05.0-trunk] firmware [20.05.0-trunk] config[20.05.0-trunk] branch[dev] Linux opi-one 5.5.8-sunxi #trunk SMP Wed Mar 18 21:19:37 +03 2020 armv7l GNU/Linux via apt update I did get the follwing error-message: Trigger für mime-support (3.64) werden verarbeitet ... E: Schreibfehler - ~LZMAFILE (28: Auf dem Gerät ist kein Speicherplatz mehr verfügbar) I did found out via df that /dev/zram0 = /var/log is used up to 100% :( root@opi-one(192.168.6.114):~# df Dateisystem 1K-Blöcke Benutzt Verfügbar…

Hi there, I have been trying Armbian Buster for the first time. On the first look everything works fine and quick. But I cannot get proper sound from the soundcard. Instead there is only random noise. Interestingly the speaker-test works fine in stereo. $ uname -a Linux teres-a64 5.4.28-sunxi64 #20.02.7 SMP Sat Mar 28 17:25:10 CET 2020 aarch64 GNU/Linux $ aplay -l **** List of PLAYBACK Hardware Devices **** card 0: sun50ia64audio [sun50i-a64-audio], device 0: 1c22c00.dai-sun8i sun8i-0 [1c22c00.dai-sun8i sun8i-0] Subdevices: 1/1 Subdevice #0: subdevice #0 $ speaker-test -twav -c2 -Dhw:0 speaker-test 1.1.8 Playback device is hw:0 S…

Hello, I try to re-install my olimex lime 1, but I'm unable to boot from the current buster image. For now, here's what I do to flash the sd card: % wget -c "https://dl.armbian.com/lime/Buster_current" % mv Buster_current Armbian_20.02.1_Lime_buster_current_5.4.20.7z % 7z x Armbian_20.02.1_Lime_buster_current_5.4.20.7z % sudo sh -c "dd if=Armbian_20.02.1_Lime_buster_current_5.4.20.img of=/dev/sdc bs=1M" And I come up with a result like this: % sudo sfdisk -d /dev/sdc label: dos label-id: 0xd9b237ef device: /dev/sdc unit: sectors /dev/sdc1 : start= 8192, size= 2318336, type=83 Is this empty space before the first par…

Hi friends, need for your advice and experience. How can i disable а boot from sd card after moving Armbian(latest vesion) to EMMC? My board is Orange Pi Plus 2e. I would like to use sd card in Armbian, but a boot terminated each time when a card is inserted. Any advice or a link? THANK YOU!

Hi again. After 2 years i want to try configure CanBus on BananaPi and still nothing. I'm continuing my previous post What i do: 1) Paths dtb with this instruction : 2) Load kernel modules: # lsmod | grep can can_raw 20480 1 can_bcm 24576 0 can 20480 2 can_raw,can_bcm sun4i_can 16384 0 can_dev 20480 1 sun4i_can 3) Spawn can0 interface # ip link set can0 type can bitrate 500000 restart-ms 100 triple-sampling on loopback on # ip link set up can0 4) Play with candump / cansend On loopback my messages show in candump, but on arduino…

I am trying to enable Winstar TFT display on Olimex Lime2 board under the kernel 5.4. Display spec is here: https://www.winstar.com.tw/products/tft-lcd/ips-tft/lvds-tft.html Up to the day we've been using the legacy kernel 3.4 and the display worked fine -- the u-boot was compiled with the settings (CONFIG_VIDEO_LCD_MODE, CONFIG_VIDEO_LCD_POWER etc) suggested here: When I try to use the same settings in the mainline sources of armbian, the display does not work. I've enabled backlight with a DTS overlay and the backlight works but the display stays blank. Here is the output of dmesg: [ 2.846134] printk…

Hi, Is the first time that I will post on the forum. I don't know if it is the right place for it. Sorry if my question doesn't belong here. I want to install that program (USB Network Gate Linux) on the lastest version of Armbian Debian based (No Ubuntu) on my board, which is NanoPi NEO 2 1GB. After plugged into the board, I entered via SSH, change psswd and I did: sudo apt-get update sudo apt-get upgrade Downloaded the file with wget https://cdn.electronic.us/products/usb-over-ethernet/linux/download/eveusb_armv7l.deb I tried to install it with dpkg -i eveusb_armv7l.deb But I get missing dependencies so... sudo ap…

Greetings, I'm not good with linux so excuse any stupidity i might say. I have been using Xenial for years now and just decided to update. In the past i was using the sunxi module to access gpio's For ex: echo 1 > /sys/class/gpio_sw/PA7/data Now in Bionic i just noticed gpio's are not accessed in the same way. According to this user, we can either use sysFS (which seems deprecated) or libgpiod. The problem is that i can't make it work. libgpiod: root@orangepi:~# gpioset gpiochip0 29=1 gpioset: error setting the GPIO line values: Unknown error 517 sysFS: root@orangepi:~# echo "29" >/sys/class/gpio/export -bash: echo…

I recently started playing around with OrangePi Zero with the Allwinner H2+ CPU. I want to test out the internal audio DAC. To do so I enabled "analog-coded" in armbian-config. After rebooting I saw a new audio device in the output of "pacmd list-cards", but it says that only mono is available. How can I configure stereo sound? I haven't played around with "/etc/asound.conf" much as I don't understand it. Also, I don't have anything plugged into the audio pins on the GPIO.

Hello, I am working with a Nanopi Neo Air incorporating the System on Chip Allwinner H3. I need to establish a serial communication via the SPI bus, to do this I am looking for some information related to the SPI bus. Can you help me to know the following information please: - What are the min and max SPI bus frequencies that I can use with the Nanopi Neo Air (Allwinner H3)? How can I calculate them? And are there specific frequency values to use (meaning the relationship is not linear, for example: 3.84MHz, 4.34MHz, etc)? - Can the Nanopi Neo Air be configured as an SPI bus master and as a slave (not at the same time) or o…

Hello, Using Armbian 20.02.1 Buster Image: Armbian_20.02.1_Orangepiplus_buster_current_5.4.20 Kernel: Linux orangepiplus2 5.4.28-sunxi #20.02.7 SMP Sat Mar 28 14:32:15 CET 2020 armv7l GNU/Linux. USB devices can't be detected. I tried with my bluetooth dongle, usb storage drive. None of them works. lsusb -t /: Bus 04.Port 1: Dev 1, Class=root_hub, Driver=ehci-platform/1p, 480M |__ Port 1: Dev 2, If 0, Class=Mass Storage, Driver=usb-storage, 480M /: Bus 03.Port 1: Dev 1, Class=root_hub, Driver=ehci-platform/1p, 480M /: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=ohci-platform/1p, 12M /: Bus 01.Port 1: Dev 1, Class=root_…

Hi all, I need to enable rts/cts on my OrangePi Zero with Armbian buster with Linux 5.4.26-sunxi installed. I added the "param_uart2_rtscts=1" (I'm using /dev/ttyS2) to the /boot/armbianEnv.txt file On mi code I use this initialization of the port. xxxxx.c_cflag |= port_parity | port_bits | port_stop | CLOCAL | CRTSCTS | CREAD; Not only rts/cts but also the tx and rx pin aren't working now. Has anyone managed to enable the port on this board? Am I doing something wrong?

Hello everybody, the images from armbian for my Orange Pi 3 work very fine and stable. Thank you for that. I came to armbian by links form orangepi.org. When I tried to get an Android image from there I got an Xutuntu image. (https://drive.google.com/drive/folders/1Urh9-yljq9Mrrafp7ZWRVf_s_AdjUoTQ) Do you know where to get an Android for my Orange Pi 3? Thanks if you have information for me about that.

Hi, there are invalid references inside sun50i-h5-fixup.scr, I think. I use NANOPINEO2, myself compiled linux-*-current-sunxi64_20.05.0-trunk_arm64.deb, kernel 5.4.28-sunxi64 #trunk SMP PREEMPT. amrbianEnv.txt (reduced): overlay_prefix=sun50i-h5 overlays=i2c0 uart1 uart2 usbhost1 usbhost2 usbhost3 param_uart1_rtscts=1 param_uart2_rtscts=1 For example, the row param_uart2_rtscts=1 leads to use following rows of sun50i-h5-fixup.scr: fdt get value tmp_phandle1 /soc/pinctrl@1c20800/uart2 phandle fdt get value tmp_phandle2 /soc/pinctrl@1c20800/uart2_rts_cts phandle fd…

As we know, the PCIe on H6 is buggy, which doesn't offer linear address, and Linux cannot support such kind of configuration. However, the Cortex-A53 cores used by H6 supports virtualization, which can be used to change the order of the address space. Recently, I tried to make use of virtualization to provide linear mapping of PCIe, and I succeed in making an Intel 6205 wireless card working. The hypervisor code is at https://github.com/Icenowy/aw-el2-barebone . It's intended to start before U-Boot, and located at 0x40010000. A U-Boot fork that is patched to load the hypervisor is at https://github.com/Icenowy/u-boot/tree/h6…

My board works pretty well upto 1 000 00 Hz without fan and up to 1 200 000 Hz with (noctua) fan. However I am still using an usb wifi card, to be able to connect with ssh. Anyone having wifi with the built in wifi card work properly? Mine just shuts off. With an external wifi usb card, it works like a charm. Since my 3-d printers are in the living room I i have the orange pi:s in the living room. They are primary used for octoprint. I would like to have the built in wifi on orangepi prime to work.

Hi, I'm running a kernel from yesterday on Orange PI One Plus: Linux orangepioneplus 5.5.13-sunxi64 #trunk.087 SMP Fri Mar 27 01:33:22 CET 2020 aarch64 GNU/Linux I've sucessfully setup wireguard: root@orangepioneplus:~# wg interface: wg0 public key: YKbQlQmch4sfNOtymDrnZbuLTD3zLO72cbIIFuXED1c= private key: (hidden) listening port: 42655 peer: dg1cKCId81d6h5cWUQ61BMHksBbi0FdFnitjxDuOuno= endpoint: ******:51820 allowed ips: 10.9.0.0/24, fd86:ea04:1115::/64 latest handshake: 15 seconds ago transfer: 92 B received, 180 B sent persistent keepalive: every 25 seconds But it seems that crypto is failing from time to time: root@orange…

Hi all, Successfully Installed Armbian_20.02.1_Nanopineo2black_buster_current_5.4.20.img on a NanoPi Neo2 Black using an SD Card. The board is fitted with a 16GB eMMC card via the optional adapter. Ran apt-update && apt-upgrade && armbian-config (“Install” “Install to/update boot loader” -> Install/Update the bootloader on SD/eMMC" - that was the only option available.) Proceeded with 'nand-sata-install' only to be presented with the same 'Install/Update the bootloader on SD/eMMC' and nothing else. Poked about, no mention of the eMMC card during boot (via dmesg) and no '/dev/mmbblk1' - which I thought mig…

Hello, I'm a new Armbian user of my first OrangePI One H3 board after much time spent on rpi boards. I was curious to see how these boards run and I bought one. I'm using a fast 32GB A2 microsd, an external 4 USB externally powered hub, an HDMI to VGA converter with audio out. I was deciding at first which o.s. to use cause I've seen there're also Ubuntu and Debian official 5.x kernel based images on their page but I tried this at first. I've installed usual applications browsers office apps mail etc, and now I'd like to make some questions to better understand some things: 1) I know being on the armbian forum I'd expect everyone to prefer thi…

Hi I have an orange pi 3 board ,I want to turn on and use 5v cooler fan that uses GPIO ( pin 2 and pin 4 ) , how can I do that? thank you

Hi, I've recently got a ZeroPi from FriendlyElec and I immediately installed Armbian Buster, so far is working great except for a minor issue with the Gigabit ethernet. I'm planning to use it with Wireguard as server so I've made some performance checks first to test the actual network speed with iperf3. What I discovered surprised me, the network throughput in upload from the ZeroPi is fine (900 to 950 Mbps) but the download seems to be limited to ~380 Mbps. ------------------------------------------------------- # UPLOAD TEST (ZEROPI ---> HOST) # $ iperf3 -c XX.XX.XX.XX ------------------------------------------------------- [ ID] Interval …

If I convert rootfs to btrfs do I need to rebuild /boot/initrd.img-5.4.20-sunxi. E.g. is it enough to convert ext4 to btrfs on another PC and replace rootfstype=ext4 by rootfstype=btrfs in /boot/armbianEnv.txt? Armbian 2020.02.1 mainline with default kernel, orange pi plus I need a compression because OPI+ supports cards up to 32 Gb only. Thanks in advance.

Hello, Long time follower, first issue/bug post. I have read and tried several options over period of time to get this working, nothing helped. ReWrote Clean image, changed SD cards (and sizes 8 > 16 > 32 > 16g). Setting /etc/netwrok/interface allow-hotplug eth0. iface eth0 inet dhcp NetworkManager.conf [ifupdown] managed=true/false Tested for power consumption using ( have a 5v 4A supply ) and I know I have sufficient power stress -c 4 -t 10 stress: info: [1347] dispatching hogs: 4 cpu, 0 io, 0 vm, 0 hdd stress: info: [1347] successful run completed in 10s stress -c 2 -m 2 stress: info: [1359] dispatching hog…

Hello guys. After a long time unsuccesfully trying to use a NanoPi Neo to record I2S data, I wonder if is there some NanoPi board that is capable of such thing. Can you suggest one? Thank you very much!

Very minor niggle, got a ZeroPi today and of course it will run Armbian, after doing the mandatory apt update && apt upgrade I was greeted with a banner saying xt-q8l-v1 instead of ZeroP when logging back in after rebooting for the kernel update. Not sure why it's confused. I used the Buster Minimal image from the ZeroPi download page. root@zeropi:~# cat /etc/armbian-release # PLEASE DO NOT EDIT THIS FILE BOARD=xt-q8l-v10 BOARD_NAME="xt-q8l-v10" BOARDFAMILY=rockchip BUILD_REPOSITORY_URL=https://github.com/armbian/build BUILD_REPOSITORY_COMMIT=1ac5f7ac VERSION=5.95 LINUXFAMILY=rockchip BRANCH=default ARC…

I just wanted to report that Armbian Buster image for Orange Pi 2 there SSH does not work. I tried installing it twice and also tried taking all updates. I had no skill to analyze or fix the problem, so just wanted to report it as is in case if it is not known. SSH does work on the Bionic Image for Orange Pi 2.

Hi, Armbian gurus, I'm trying to make the build system to build image with LibreELEC kernel tree for PineH64 I heard the kernel is patched for being better at hardware decoding Here are what I have done in order: 1. Retrieve patched kernel tree from LibreELEC build system. Upload the patched kernel tree to my gitlab account. 2. Modify config/sources/families/include/sunxi64_common.inc to make KERNEL_SOURCE = my previous repo; KERNELBRACH = master. To make it fetchable during bilding. 3. Modify lib/compilation-prepare.sh: skip aufs patch. 4. Modify lib/compilation.sh: skip advanced_patch in compile_kernel() After all th…

Hello. I have a small problem: I can't change the language on my OPi Zero. I have successfully done that with OPi Lite 2 and OPi 3, but for some reason on the Zero when I go to change it, the module fails to load and just quits back to the same "menu page". (essentially does nothing). The only thing I can think of, is that both of the other boards have 1Gb RAM and this only has 512Mb and thus it runs out of memory? That doesn't sound too plausible though - a list of keyboard languages shouldn't take tens or hundreds of megs of RAM. As far as I know, each board is running the same version of Armbian, so that shouldn't be a problem.

Hi, I want to expand my NanoPi-NEO2 more uart ports through I2C, so I make a choice to use a sc16is750 module( just like sparkfun sc16is750 ). Below is all of my system information: pi@nanopineo2:~$ uname -a Linux nanopineo2 5.4.20-sunxi64 #20.02.1 SMP Mon Feb 17 02:37:37 CET 2020 aarch64 aarch64 aarch64 GNU/Linux First step ,I edit a device tree overlay for the sc16is750 named sc16is750-i2c.dts as below: pi@nanopineo2:/boot/overlay-user$ sudo nano sc16is750-i2c.dts /dts-v1/; /plugin/; / { compatible = "allwinner,sun4i-a10", "allwinner,sun7i-a20", "allwinner,sun8i-h3", "allwinner,sun50i-a64", "allwinner,sun50i-h5…

Re: the built-in 16GB emmc on a 14" pinebook (early model). Applies to Armbian_20.02.1_Pinebook-a64_bionic_current_5.4.20.img and also to trunk build with dev kernel. Prevents installation to emmc from SD, which worked from trunk@3b1418fb5b58f187c658a050c592f2c50fb2db04 in January. I haven't managed to find from which commit it started failing yet. It is in some partial/invalid state in u-boot: => mmc list mmc@1c0f000: 0 (SD) mmc@1c10000: 2 mmc@1c11000: 1 => mmc dev 0 switch to partitions #0, OK mmc0 is current device => mmc info Device: mmc@1c0f000 Manufacturer ID: 1b OEM: 534d Name: 00000 Bus Speed: 50000000 Mo…

Hello, I wanted to upgrade my Bananapi M1. So I downloaded "Buster minimal" from https://www.armbian.com/bananapi/ Last modified: 2020-02-17. I flashed the image to my SD card and started the SBC. But nothing happened. I got no heartbeat LED nor HDMI output. (I know from my Tinkerboard that I have to boot without connected HDMI to start correct. I did this with the bananapi too.) So I tried different variants: Bionic server, Buster server and Buster desktop. I never had a video output. I cross checked with my old raspian lite from 2016. With this image the Bananapi works. I used dd and Etcher for SD card preparation. What am I doing wrong? Can I us…

I'm using OPi LTS and cant change state of PA13-14-15-16 pins. I trying on fresh Armbian Bionic. Checked SPI is disabled. Trying this code for access pins: import OPi.GPIO as GPIO pin = "PA13" GPIO.cleanup() GPIO.setmode(GPIO.SUNXI) #GPIO.setwarnings(False) GPIO.setup(pin, GPIO.OUT) GPIO.output(pin, 1) and take this error altrough write in code "GPIO.cleanup()" ERROR: "UserWarning: Channel PA13 is already in use, continuing anyway. Use GPIO.setwarnings(False) to disable warnings." When trying "GPIO.setwarnings (False)" before change output of pin. Pin voltages when write "1" to output: PA13 -> 3V PA14 -> …

i did some experiments today, i tested 2 Orange pi with the same image debian buster in the lastest version. i put a script on both that reported the execution time of a function and the date, one is running smoothy, the other crashes the orange, the bottom is the log what caught exactly at the time it caught, could someone help me understand it? Mar 19 09:25:01 localhost CRON[1657]: (root) CMD (command -v debian-sa1 > /dev/null && debian-sa1 1 1) Mar 19 09:30:01 localhost CRON[1702]: (root) CMD (/usr/lib/armbian/armbian-truncate-logs) Mar 19 09:31:52 localhost systemd[1]: Stopped target Timers. Mar 19 09:31:52 localhost systemd[1]: Stopped Message of the D…

Hello, I have two Banana Pi Pro boards with current Armbian 20.02.1_Bananapipro_buster_current_5.4.20_minimal, kernel 5.4.20-sunxi and both have small SSD connected (WD 120GB and Goodram 120GB). fdisk -l doesn't show any drive's except sdcard (and ram drives). Is there any way I can get it working?

Hi all, I've a bananapi 1 and would like to follow this guide to attach to my board directly a Zigbee device CC2530+CC2591: https://www.zigbee2mqtt.io/information/connecting_cc2530.html#wiring-cc2530-to-the-raspberry Then, I've connected it using exactly the same schema, which should be the same on BananaPi, based on http://wiki.lemaker.org/File:Banana_Pro_CON6_Definetion.png VCC -> 3,3V (Pin1) GND -> GND (Pin6) P02 -> TXD (Pin8) P03 -> RXD (Pin10) Then, I've tried to connect to serial via minicom: minicom -b 115200 -o -D /dev/ttyS2 BTW I'm not getting any info from the device, so what I'm doing wrong? I've the…

I was updating some images and thought the Orange Pi + had been retired ... but there was no Support Ended note. I see a lot of other Plus versions of Orange pi boards listed, but not the plain Orange Pi +. Seems easy to miss ;] A little searching found the Orange Pi + is supported https://www.armbian.com/orange-pi-plus/ Am I just missing the link in Downloads? The only way I've been able to get to the page is by direct url or a duckduckgo search https://duckduckgo.com/?q="orange+pi+plus"+armbian&t=raspberrypi&ia=web

Orange Pi Zero Plus2 H5 I currently am booting from the onboard 8GB EMMC. As I am still experimenting with this board, sometimes I would like to wipe and start from a backup remotely, keeping a copy of my backup on an SD card that's in the machine used for extra storage space. I use timeshift on my Mint laptop that restores a snapshot of / from an SDcard, but it is a graphical utility. Is there a similar CLI utility for Armbian? Or one that can be installed? Thanks.

Hi I want use spi in slave mode, how i can enable slave? cat /boot/armbianEnv.txt verbosity=1 console=serial overlay_prefix=sun50i-h5 overlays=spi-add-cs1 spi-jedec-nor spi-spidev param_spidev_spi_bus=0 param_spidev_max_freq=100000000 rootdev=UUID=47313251-44b3-4a77-aef5-c53397e3a685 rootfstype=ext4 usbstoragequirks=0x2537:0x1066:u,0x2537:0x1068:u

Hi all, I want to set my Pi with specified hostname. I checked successful when cat /etc/hostname. Howerver, when I am using a Advanced IP Scanner to scan all the network, it just show the IP without the hostname while others raspberry boards have displayed as my attached image below. Thanks!

I installed Armbian onto a reliable 16GB class 10 SD card, put it into an Orange Pi 3 with a 5v 3000 mA power supply (not a phone charger) and I've bumped into this error.. ALERT! /dev/mmcblk0p1 does not exist. Dropping to a shell! The armbianmonitor -u command was not found so I had to take a photo of the computer screen. I'm not sure what is going on here and I couldn't find someone who had this error on an Orange Pi 3 before. If anyone has some advice I'd love to hear it.

Hi folks, I'd like to build a simple rs485 interface onto an A20-OLinuxino-Micro board. Therefore I was looking into utilizing one of the UARTs (6 or 7) on EXT1 or EXT2, add an external driver chip to it and 'fork' the according kernel module to implement support for switching send/receive with the RTS line. While that seemed to be an easy approach, I already got stuck with the basics. :-( dmesg shows me [ 2.822776] printk: console [ttyS0] disabled [ 2.842962] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 53, base_baud = 1500000) is a U6_16550A [ 2.843045] printk: console [ttyS0] enabled [ 2.866650] 1c29800.serial: t…

Hello Everyone, I have an Orange Pi 3 and I want to wipe the default OS and replace it with Armbian. It has some foreign default OS which appears to be Android based and without a word of English. The Armbian documentation wasn't much help because it didn't provide any instructions for this sort of hardware. If any of you could give me some pointers that would be very much appreciated.

Hello, can anyone share his hostapd.conf where he managed to get HT40 "width: 40 MHz" running on orange pi lite 2 while it is in AP mode ?

Guys! I have two of the original Pine64+ boards from the kickstarter (with LCD) and tried to launch the latest armbian image on them. Both of them freezes in u-boot after it tries to evaluate USB connections... Rather strange, they work well with the ancient original images. ``` U-Boot SPL 2019.10-armbian (Feb 17 2020 - 09:25:19 +0100) DRAM: 2048 MiB Trying to boot from MMC1 NOTICE: BL31: v2.2(debug):9560593-dirty NOTICE: BL31: Built : 09:25:06, Feb 17 2020 NOTICE: BL31: Detected Allwinner A64/H64/R18 SoC (1689) NOTICE: BL31: Found U-Boot DTB at 0x4095dd0, model: Pine64+ INFO: ARM GICv2 driver initialized INFO: Configuring SPC Controlle…

After some hack, I use the SPI port on OPi One to connect with a MAX6675 board. The SPI port on One is SPI0, so armbianEnv.txt should include these: overlays=spi-spidev param_spidev_spi_bus=0 param_spidev_spi_cs=0 the MAX6675 connects to OPi One as: MAX6675 One GPIO ------------------------------------------ VCC PIN17 GND PIN20 SCK PIN23 CS PIN24 SO PIN21 Then use the attachment program to read f…

Is it normal? Why Couldn't get bank PG regulator U-Boot SPL 2019.10-armbian (Feb 17 2020 - 08:31:10 +0100) DRAM: 1024 MiB Trying to boot from MMC1 NOTICE: BL31: v2.2(debug):572fcdd-dirty NOTICE: BL31: Built : 08:31:00, Feb 17 2020 NOTICE: BL31: Detected Allwinner H6 SoC (1728) NOTICE: BL31: Found U-Boot DTB at 0xc07ef00, model: OrangePi Lite 2 INFO: ARM GICv2 driver initialized INFO: PMIC: Probing AXP805 on I2C INFO: PMIC: aldo1 voltage: 3.300V INFO: PMIC: aldo3 voltage: 3.300V INFO: PMIC: bldo1 voltage: 1.800V INFO: PMIC: bldo2 voltage: 1.800V INFO: PMIC: bldo3 voltage: 1.800V INFO: PMIC: cldo1 voltage: 3.300V INFO: PMIC: dcdcd voltage…

Hi all. I have problem with SPI on my board . I find solution but I want to know why .. On first : Linux orangepizero 5.4.20-sunxi #20.02.1 SMP Mon Feb 17 02:09:41 CET 2020 armv7l armv7l armv7l GNU/Linux If go to armbian-config and enable SpiDev .. then reboot not find SPI device on my dev tree .. if look to armbianEnv.txt there is spi-spidev but on dev tree no SPI device .. My solution is this : on /boot/dtb/overlay is file sun8i-h3-spi-spidev.dtbo , decompile it and there is this text : /dts-v1/; /plugin/; / { compatible = "allwinner,sun8i-h3"; fragment@0 { target-path = "/aliases"; __overlay__ { spi0 = "/soc/spi@01c6…

Hi, can anyone let me know if we can enable a UART port from a DTB file? Means like compile DTB to DTS, make changes and then again recompile it to a DTB like we do in the script.bin file of legacy kernel. Earlier I have used to mention "overlays=uart1 uart2" in the armbianEnv.txt file but, this didn't work for me .

Hi! I didn't find much info in the forum on how to correctly apply RT patch to the Armbian (Orange Pi Zero Plus H5 board). Here is how I did: Built Armbian as follows: 1) I downloaded patch-5.4.22-rt13.patch from https://mirrors.edge.kernel.org/pub/linux/kernel/projects/rt/5.4/ and placed into ~/build/userpatches/kernel/sunxi-current ( I saw from the logs that this is the folder for the builder to search for user patches in my case) 2) Started ./compile.sh --> FULL OS image for flashing --> Show a kernel configuration menu before compilation --> orangepizeroplus (H5) as target board --> current (recommended , which is 5.4.23…

I've created an armbian minimal image for my pinebook with luks encryption. It works fine but I cannot see the password prompt on screen... the boot process is: * The armbian uboot is displayed * Then a black screen... After a few seconds I'm assuming it is time to put my luks password, so I do it * Then the screen starts to show the boot text Is this expected? Am I doing something wrong? I don't want to install plymouth, just the usual LUKS password prompt. Thanks!

Hi everyone, I have a problem when work on OPi zero wifi which is running Armbian linux sunxi 4.19.62. I used nmtui to configure wifi connection with static ip. It works fine even rebooting or re-powering up however I tried to power off the router and the result is it has never reconnected again. Next, I plugged in the ethernet cable into RJ45 port, the connection is established. I use sudo ifconfig to show the information, I saw that both the wifi (static) and ethernet are correctly then I can access via ssh or scanning the ip. One again, I continued plugging out the ethernet cable, all connections were disappeared even wifi and connection via ssh is failed. …