Allwinner sunxi

Creating a wireless access point through armbian-config fails in the new 22.02 release for the popular TP-Link TL-WN725N USB Wifi Dongle. I am raising it here because it worked previously on 21.08. I have tracked it down to be related to a driver change. Release version 22.02 uses the r8188eu and in fact this is one of the drivers the Hotspot configuration actually warns you about. Could this commit be related? In order to overcome this I have downloaded the official TP Link driver sources. but failed to compile them because headers are missing (even after using armbian-config to install headers). I have also followed the official documentation to learn about…

Dear All, I get frequent and random disconnection from orangepizero3 onboard wifi with armibian community (self-built) both trunk and 24.02 current kernel, 6.6.26 and 6.6.28 message is always [21738.338021] sprdwl:sprdwl_fc_add_share_credit, 536, mode:1 closed, index:0, share it [21848.116072] sprdwl:sprdwl_fc_add_share_credit, 536, mode:1 closed, index:0, share it [21915.426734] unisoc_wifi unisoc_wifi sta0: sprdwl_report_connection sm_state (5), status: (2)! [21915.426817] unisoc_wifi unisoc_wifi sta0: sprdwl_report_connection Vodafone-CSC failed status code:1! [21919.477424] sprdwl:sprdwl_fc_add_share_credit, 536, mode:1 closed, index:0, share …

Hello everybody, I'm new in armbian and Cubietruck. It looks to me that bluetooth is installed but if I scan for devices no devices will be found. I have the impression that something is wrong with the driver installation. I used the file image "Armbian_community_24.11.0-trunk.130_Cubietruck_noble_current_6.6.44_xfce_desktop.img.xz" for installation. Any help would be appreciated. Best regards Albrecht

I know I need to find out which drivers to use... I just don't know where to start, I know I've seen some people having success with these displays - ili9488, and a couple others - I just don't know if this fits one of those overlays or not. (nothing I've tried so far has worked). Any help identifying and pointing in the right direction, I would greatly appreciate. Trying to get this to work on my Orange Pi Zero 3 4gb. (uploading images has failed.... so I guess I'll link them?) https://imgur.com/a/NORYCj7 *edit 12/21 - renamed topic since I've Identified the display, going to track my (our?) progress with trying to get it to work…

Radxa-cubie-a5e second Ethernet port not work after update Armbian 25.11.0-trunk.259.

Hello. After burning Efuse to the Nanopi Neo Core, I can't boot from emmc. It works from the SD card, so I try loading everything into emmc: spl, uboot. But spl doesn't find u-boot, as far as I understand. I'm using the u-boot and dts config from the Nanopi Neo, with some edits to mmc2, since it's not available in the Neo. U-Boot SPL 2024.07 (Feb 25 2026 - 15:51:42 +0300) DRAM: 512 MiB Trying to boot from MMC1 CMD_SEND:0 ARG 0x00000000 MMC_RSP_NONE CMD_SEND:8 ARG 0x000001aa RET -110 CMD_SEND:55 ARG …

Hello! when I connect to the OrangePi mini TV / AV, TV wrote "no signal" If you connect to hdmi ok FEX: [disp_init] disp_init_enable = 1 disp_mode = 2 screen0_output_type = 3 screen0_output_mode = 3 screen1_output_type = 2 screen1_output_mode = 11 fb0_framebuffer_num = 3 fb0_format = 10 fb0_pixel_sequence = 0 fb0_scaler_mode_enable = 1 fb1_framebuffer_num = 3 fb1_format = 10 fb1_pixel_sequence = 0 fb1_scaler_mode_enable = 0 [tv_out_dac_para] dac_used = 0 dac0_src = 4 dac1_src = 5 dac2_src = 6 dac3_src = 0 and [tv_out_dac_para] dac_used = 1 dac0_src = 4 dac1_src = 5 dac2_src = 6 dac3_src = 1 [tvout_para] …

Hi! Happy new year! Recently, I experienced a strange date problem on my Cubitruck. After a reboot or a powerdown/powerup the date is set to Jan, 1 1970 00:00:00 UTC (aka epoch). As far as I can see the RTC is working. ntpd is enabled on my Cubitruck. (Since it runs its own nameserver with DNSSEC, DNS resolving isn't working if the date is set to epoch. So ntpd can't reach any NTP server.) I'm running a vanila kernel with Debian Jessy (8.2): Linux vaili 4.3.3-sunxi #3 SMP Mon Dec 28 11:27:16 CET 2015 armv7l GNU/Linux Setting the date after a reboot and powerdown/powerup was working some time ago. After a few updates of the system image it wasn't an…

Hello. I have a annoying problem each time i burn with 'dd' a armbian*raw image (custom) in linux my orange pi lite not boot, i must format and write in windows (write32...) then works. any idea? [ 998.313215] usb 3-7: new high-speed USB device number 6 using xhci_hcd [ 998.443018] usb 3-7: New USB device found, idVendor=058f, idProduct=6331 [ 998.443026] usb 3-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 998.443030] usb 3-7: Product: Mass Storage Device [ 998.443033] usb 3-7: Manufacturer: Generic [ 998.443036] usb 3-7: SerialNumber: 058F091111B [ 998.443733] usb-storage 3-7:1.0: USB Mass Storage device detected [ 998.446321] scsi host…

Greetings, Firstly I would like to say that I really appreciate the work that has been done by this wonderful community of developers and users of Armbian. Secondly I am sorry if the problems that I describe here have been already discussed. I have not found anything alike. So I am a proud owner of the OPi PC board. Everything seems to be OK, except some fan issues. What have I done until now: 1. Installed Armbian Jessie Server with RPi Monitor 2. Added a. heatsink on the SoC and RAM chips b. Pi Fan with the case The problems: 1. The fan does not work if connected to the second and fourth pins BUT it works using pins 4 and 6. a. It is extrem…

Hi, So far was working with headless Armbian images. Now I need to attach an HDMI monitor to my OPi ONE. Generated a desktop Armbian 5.24 jessie kernel 3.4.113, attached the HDMI monitor and booted. I saw the inital seconds of U-Boot logging the discovery of the monitor and a few other things and then it went blank. I guess after some reading in the forum that there is no display manager included in the distro or is there some other problem? Is there some build option that we could include a manager (eg KDE/XFCE/etc) in the image generation proccess? Or if there is any guide that gives steps for adding a display manager in Armbian to a not-so-knowledgab…

I can get WiFi working on the M2+ but not with encryption, I am using the latest Armbian has anyone had wifi success with this board ?

Is there the support for hardware interrupts on pcDuino3nano gpio2(GPIO231) or gpio3(GPIO230) in Armbian mainline, as it worked on Lubuntu ? How can it be installed/enabled ?

In download section for X2 Beelink there is no image for Server stretch test as advertised on download page, only for desktop. Is it normal ? (tm)

Hello, [OPI PC+] u-boot : boot.scr issue Oracle VM: Linux cross-compilation 4.10.0-42-generic #46~16.04.1-Ubuntu SMP Mon Dec 4 15:57:59 UTC 2017 x86_64 x86_64 x86_64 GNU/Linux DS413J as DHCP and PXE/TFTP server with these files (copied from /dev/mmcblk0p1) on the TFTP root: boot.scr (mine but original one works well) script.bin KERNEL Same issue if i put my boot.scr onto the eMMC... Every single command works well on u-boot prompt. boot.cmd as follow, compiled with this command from Armbian doc: # OpenELEC Boot (philip63 - 02.12.2017) gpio set PL10 gpio set PA15 setenv machid 1029 …

Hello everyone, we are Colombian developers and we are making a project with a Orange Pi PC. We tried to connect the Orange with a laptop via USB/OTG but in Serial port mode following this guide, but we exactly need connect the Orange with the laptop via USB/OTG in Mass Storage mode, who can help us to set this mode, we are trying but not with good results. Thanks, I hope that you can help us.

Hi, my 1st post here. I have serial over OTG between Win10 PC and Zero working, fine as long as I use it for console login. (serial-getty@/dev/ttyGS0. If I stop the getty service, No usb/com port is opened @ PC side, when I plug it. I still see the /dev/ttyGS0 on the PI (stty -F/dev/ttyGS0) but apparently the device is not opened to the external world. I would expect that any send command to the device would open it, e.g. ls > /dev/ttyGS0, but nothing opens at the Win10 PC. What does getty do, so that the PC discovers the new usb serial connection and what do I have to do to achieve a device opening on the PC, not using getty on …

Hello everyone, I was running Armbian Xenial (mainline 4.11.8 kernel) on Win Plus and it was working pretty good (after a little fix). But after some bad configurations (the system was still working..), I decided to re-install the whole system. The thing is that there are no more mainline builds for this board on the download page and 3.10 kernel is too old (I need at least 4.9)... So I decided to build the system but I have some issues that makes the board pretty useless. The first is that there is no more Ethernet, no blinking light on the board neither on the switch... The second are the USB port : The two USB ports on the right of th…

I have an Orange Pi PC Plus running the mainline Debian Stretch desktop version of Armbian, but lately I've been using it headless. When I'm logged in over ssh and shutdown it down using "sudo shutdown -h now", the ssh connection drops and the board's LED flashes then shuts off, giving every indication the board is off. However, power consumption doubles (increasing from ~1.2W to ~2.4 W)! The problem persists as long as the board is powered, so I presume the board is hung and never fully shutdown. Any thoughts as to what could be causing the board to hang when shutting down?

Hi, I have a quesiton/problem: How can I access the Nano Pi Neo Air with current Ambian (Stretch) OS (Armbian_5.69_Nanopiair_Debian_stretch_next_4.19.13) using USB SSH? Access to serial console is working fine, but I need SSH. How can I activate this, WLAN is no option for me due to requirements for the systems. Thank you!

hi ( armbian stretch over orangepiPC ) i try to use OPI 5MP Camera OV5640 - Auto zoom with wide-angle lens for Orange Pi PC /Pi One/PC Plus/Plus2e However , video0 device doesnt appear on /dev/ folder. what can i do ? thanks

I have installed the most current Armbian Bionic to a Orange PI zero (512MB). I can't record anything from microphone, as the recording process just hangs forver (blocks). arecord -l gives the following output: **** List of CAPTURE Hardware Devices **** card 0: Codec [H3 Audio Codec], device 0: CDC PCM Codec-0 [] Subdevices: 1/1 Subdevice #0: subdevice #0 arecord -d2 test.wav gives the following output, but hangs till killed with Ctrl-C Recording WAVE 'test.wav' : Unsigned 8 bit, Rate 8000 Hz, Mono ffmpeg -f alsa -i hw:0 -t 5 test1.wav gives the following output, and hangs as well forever: ffmpeg version 3.4.6-0ubuntu0.18.04…

Как мне использовать встроенный микрофон? Pulseaudio

Hi, I use OrangePi PC as my home samba server, as well as dlna server. It works from hdd, since I made a command nand-sata-install. I want to change the disc for a bigger one, how can I do this? If I will make rsync with all hdd will it be enough?

I'm running a web cam on a OrangePiOne. For the last four days its been performing adequately, at least as well as the RaspiPiZero. At the moment though its suddenly decided to become a snail... slower than paint drying or melting blanc mange. So here I am looking for pointers. I don't have a lot of detail, but what I have follows. I'm using mjpg-streamer to handle the webcam. In the past this has been rock solid without issue, at this point I assume its not the problem in itself. Architecture: armv7l Byte Order: Little Endian CPU(s): 4 On-line CPU(s) list: 0-3 Thread(s) per core: 1 Core(s) per so…

Hi, I followed the following link to create encrypted root. However, every time I boot, i don't see any prompt for password. My armbianEnv.txt is following", but nothing display at "Console" (HDMI) or "Serial" (debug 3 pins next to USB port). ~ Has anyone had any success? I did this for OrangePi Lite 2 (64-bit) H6 and no issue. Thanks

I've no problem using my Banana Pi with a wifi connection. But if I plug it on my router with a ethernet cable it crashs after a short time. Should I upload the output of armbianmonitor when ETH is plugged? Because it will take me a few tries, to do that.

Hello, I am very sorry that I have to leave the Armbian flock, but the Dietpi-Distro is so much better. It simply boots off the SD-Card on my NanoPi NeoCore and the darned Ethernet simply works; also the DTB overlay files work, so the additional I2C and UART hardware works in Dietpi. And the kernel is 6.x too ! However, the NanoPi Neocore is shipped with an outdated Armbian (using Kernel 4.x) on EMMC. What I now want is to replace the prepared EMMC Armbian distro with whatever is on my SD-Card, but this task is more difficult than I tought. What I would need is to simply copy the whole SD-Card to EMMC, but the recommended "dd if='sdcard...' of='emmc...'...." co…

I built Armbian Edge from source (bookworm, server, no gui) and have no video via HDMI. Being a new build, networking is not set up and so I cannot SSH in to troubleshoot. I reverted to a stable Armbian build on another SD, upgraded that kernel to Edge, and lost video output. This one already has networking set up, I can SSH in, but I don't know what to look for in order to get my monitor working. Goal being, figure out what needs changed, and change it in the build process for a new image. I appreciate any pointers.

This is not solved the only tag I can add is solved. How do I change that I have an orange pi zero 3 and am trying to ssh into this board. Ive written all three minimal files to different 32gb sd cards. After I write the drive I add a blank ssh file and a wpa_supplicante.conf file with my wifi info on it. I install the os with balanaetecher or Rufus(I've tried so many things. I find my IP when I try to ssh doesn't work) but I can ping the zero. I've tried windows 8.1, and 11 plus Linux mint same thing. Could someone please help me? This probably should take 20 minutes but I've been at it for 2.5 days

I have an orange pi zero3 with 2gb of ram. Ive installed the current 6.18.43 armbian debian build. It booted fine from SD and I then flashed the boot rom to the eeprom so I could boot from USB (sudo flashcp /usr/lib/linux-u-boot-current-orangepizero3/u-boot-sunxi-with-spl.bin /dev/mtd0) I was able to boot from USB0 fine but not from the USB ports USB1 and 2 on the 13 pin header. With the help of google and some ai I found that if I run the following my sd card is recognised when plugged into usb1 fdt addr bbf107b0 fdt set /soc/usb@5310000 status "okay" bind /soc/usb@5310000 ehci_generic usb reset usb storage That produced: Bus usb…

Hello, All I'm trying to compile the ftdi_sio module using suggestions from http://www.cyberciti.biz/tips/build-linux-kernel-module-against-installed-kernel-source-tree.html. I got the message: fatal error: asm/linkage.h: No such file or directory I added following lines to the standard Makefile from http://www.ftdichip.com/Drivers/VCP/Linux/ftdi_sio.tar.gz: CFLAGS += -I$(shell echo "/usr/src/linux-headers-`uname -r`/arch/arm/include") CFLAGS += -I$(shell echo "/usr/src/linux-headers-`uname -r`/arch/arm/include/generated") but now I got the message: fatal error: mach/irqs.h: No such file or directory when I trying to find the file missing find /usr/ -type f -name…

I've seen on webpage that there is a new kernel 3.4.109. I'm currently using 3.4.108 and apt-get update/upgrade delivered new root and also new uboot, but noit new kernel ... is this known or "as planned"?

Is there any documentation related to patch integration in building process ? i see a folder userpatches but no doc associated with it. I need to build the aufs kernel module for docker on my olimex A20 lime2 and have no idea of the process. What i curently do is: > force 4.2.6 kernel version in next (same as my curent armbian image for my lime2) > start the building process > checkout aufs standalone for 4.2 in kernel sources folder > patch the kernel with aufs support > manualy reconfigure kernel with the arm toolchain to enable aufs integration as module > manualy build module with the arm toolchain > put the module on my lime2 and config…

Hi all, I've been using a banana pi as a home server since forever. It's currently running bananian with a legacy kernel. I want to use docker to make it cleaner to use so mainline is needed. My banana pi is running off a 256Go SSD (SATA) and connected through a Gigabit Switch (that's why I did not find many replacement over the years, both low power, SATA and Gigabits are hard to find even with Hardkernel stuff). So first what's running on my server now : * nzbget * nfs server * nginx as reverse proxy * nginx + php * MQTT server (Mosquitto) * MQTT relay server (with mqttwarn) * homemade domotic stuff For all of this, I guess docker will be o…

on my a20 olimex micro board with armbian 5.0 (jessie) and 3.4.110-sun7i kernel hdmi shutdown after boot (i can see bootloader and logo) with armbian 4.5 image for lime2 hdmi works, but eth0 not working and after some time (i've tested only iceweasel) with xorg and lxde display freeze and i need to restart the board to fix hdmi with micro image i need to modify boot.scr or need to rebuild kernel/bootloader?? with micro image eth0 works and i can update&&upgrade, with lime2 image (on olimexino micro board) update&&upgrade give me errors and broke boot process

I am having a problem getting armbian 5.10 trusty to work on my pcduino3 nano lite. I tried both the Vanilla and Legacy kernels of the Trusty server flavor. With the Vanilla kernel I can see the boot process via usb console debug cable but when it gets to extracting kernel I lose output. With the Legacy Kernel via the console debug cable I get this error repeating: init: ttySAC2 main process ended If I try to ssh into root@<ip of pcduino> I get denied with password 1234 Any ideas what I am doing wrong? Thanks!

First time poster, hopefully I'll get along with all of you! I am currently trying to connect a DS18(b)20 cable to my Banana Pi M2+, which is running Jessie Desktop. I connected the 3,3 V to Pin 1, GND to Pin 6 and Data to Pin 7, as well as the recommended 4,7k Ohm resistor between them. Since, as I should have mentioned, I am an absolute beginner (literally just got into this a few days ago), I used a German tutorial for this, which told me to enter the following into my command module: After which my /sys/bus folder shows a "w1" folder, which it does. However, the cable itself cannot be found. After some tinkering, I found that w1-therm does not seem…

Hi! I had serveral errors with my Cubietruck running Ubuntu 16.04 Vanilla Kernel. The system is installed on a hard-disc. There were some filesystem-error which fsck could repair. But I still have some errors. root@cubianx:~# systemctl --failed UNIT LOAD ACTIVE SUB DESCRIPTION ● apparmor.service loaded failed failed LSB: AppArmor initialization ● systemd-modules-load.service loaded failed failed Load Kernel Modules LOAD = Reflects whether the unit definition was properly loaded. ACTIVE = The high-level unit activation state, i.e. generalization of SUB. SUB = The low-level unit activation state, values de…

Hi Sorry my english and my ignorance in linux I'm trying to activate hostapd on orange pi light. I think realtek driver. Nework appairs, but i cannot associate, it says wrong password (12345678) iwconfig has not password item: Spoiler iwconfig lo no wireless extensions. br0 no wireless extensions. wlan0 IEEE 802.11bgn ESSID:"ARMBIAN" Nickname:"<WIFI@REALTEK>" Mode:Master Frequency:2.432 GHz Access Point: 2E:98:51:56:D5:65 Bit Rate:72.2 Mb/s Sensitivity:0/0 Retry:off RTS thr:off Fragment thr:off …

Hello, I know that armbian for orangepi prime is under development. Armbian does not detect the integrated wifi, and I'd like to know if it's not implemented yet or it's happening just to me

Hello! Today installed a test build armbian in my OPi Zero2+ H5. And I can't figure out how to enable HDMI. Connect UART and everything works fine and configured. But when connected to HDMI, nothing happens. The display blinks a couple of times on and off. How can I solve this problem?

Hi guys, I've searched for some days now, but couldn't find any infos. My problem is: If I want to boot my Orange Pi Zero without Ethernet, it just wont start. It seems like it is waiting for me to put in the cable. This can't be normal, can it? I ask, because, what am I supposed to do if I like my device to connect exclusively through WiFi? Or connect to nothing at all, till I need some type of connection. For me, it is important to connect only through WiFi at the moment. The OS's I've tried: Armbian Debian Jessie "mainline" and "legacy", no difference between them. Thanks, Pyro

Hello, I am using the Olimex OLinuxino and I find a constant noise at about 866.725MHz or thereabout in every board. While low, at -100dBm, when using it with IoT radios this is the band in India and it is quite a pain in applications requiring high sensitivity. This particular board had it pretty nasty at -86dB. I have tried with changing the DDR frequency as well as the CPU clock, however this nuisance refuses to go away. What can be done to get rid of this noise ? I have tried multiple boards -- Olinuxino (multiple), Marsboard, but each has some noise in exactly same band near 866MHz. Please advise.

I have 2 boards for a long time, an Orange Pi One and Orange Pi PC... Have used armbian older versions for a long time, after almost an all year without using then i have downloaded and installed on both memory cards the new version 4.14 (last version on June 16). My Orange Pi PC is fine, works nice and smoth... But the Orange Pi One dont give me any light (red or green) on the board!!! I tryed to use the OS for PC on the One and its give me green light but dont give video signal... To test the board itself, downloaded and tested a few other OS, from Orange Pi site... And all other OSs from there worked just fine on my One... Turned on leds and give me video s…

hi orangepi 2e+ with ARMBIAN 5.65 stable Ubuntu 18.04.1 LTS 4.14.84-sunxi syslog I want to mount my external hard disks with cat /etc/udev/rules.d/91-intenso.rules KERNEL=="sd?1", SUBSYSTEMS=="usb", ATTRS{serial}=="31700000000000007023", SYMLINK+="Intenso", ACTION=="add", RUN+="/bin/mount /dev/Intenso /mnt/Intenso" Normally no problem, tested with Armbian_5.65_Orangepiplus2e_Ubuntu_xenial_default_3.4.113 and Workstation PC Linux 4.15.0-43-generic #46~16.04.1-Ubuntu. With my current version, I have a problem. The udev-rule is/seem ok Spoiler orangepi@orangepiplus2e:~$ sudo udevadm test /sys/class/block/sdb1 calling: test …

Hello, Hello, I have connected a pcf6523 RTC module to my OrangePI plus 2E and I can not get it to work. The i2cdetect -y 0 command gives me the following answer: 0 1 2 3 4 5 6 7 8 9 a b c d e f 00: -- 04 -- -- -- -- -- -- -- -- -- -- -- 10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 20: 20 21 22 23 24 -- -- -- -- -- -- -- -- -- -- -- 30: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 40: 40 41 42 -- -- -- -- -- -- -- -- -- -- -- -- -- 50: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 60: -- -- -- -- -- -- -- -- 68 -- -- -- -- -- -- -- 70: 70 -- -- -- -- -- -- -- The next thing I have to …

During the last days the system crashed twice - by crashed I mean that no SSH or other connections was possible and I had to force-power off. I used it for months without crashes before so its probably related to a new SATA drive. I wanted to look at the syslog and I noticed that /var/log/syslog only shows entries starting from the current boot and the /var/log.hdd/syslog is empty. Do I understand correctly that armbian logs only to /var/log which is a ram drive so the logs (or at least the syslog) is never persisted? How can I find out whether the SATA drive is responsible and why? Maybe it has a too high power consumption under special circumstan…

I recently updated from very old Armbian image. The update was not smooth so I had to re-image my device with the newest version. After that USB devices cannot be detected at all. I tried USB keyboard and 3D printer (is should looks like generic serial device). Keyboard works perfectly during u-boot but stops working as soon as kernel starts. lsusb doesn't show any devices: $ lsusb -t /: Bus 09.Port 1: Dev 1, Class=root_hub, Driver=musb-hdrc/1p, 480M /: Bus 08.Port 1: Dev 1, Class=root_hub, Driver=ohci-platform/1p, 12M /: Bus 07.Port 1: Dev 1, Class=root_hub, Driver=ohci-platform/1p, 12M /: Bus 06.Port 1: Dev 1, Class=root_hub, Driver=ohci-platform/1p, 12M /: Bus…

I am running Armbian Focal with Linux 5.4.43-sunxi64 (and now downgraded to 4.19.125-sunxi64) on my Orange Pi PC 2. I use motion software to provide a "18ec:5555 Arkmicro Technologies Inc. USB2.0 PC CAMERA" to the network. I also use pjsip to provide SIP functionality for the same device as audio input. As soon as I start pjsip for some reason I get a very high load average until the kernel detectets stalled CPUs and finally the entire device crashes. This worked fine in a previous version and started after I upgraded to focal. I did a kernel backtrace and this is what I got: [ 401.002517] sysrq: Show backtrace of all active CPUs [ 401.009965] sysrq: CPU1: [ 401.01…

Hello, First of all, I'm new on Armbian I got some a stack dump on the console and can see following messages on kernel.log : --- Oct 24 14:27:28 localhost kernel: [183195.142242] 8<--- cut here --- Oct 24 14:27:28 localhost kernel: [183195.152222] Unable to handle kernel paging request at virtual address 2f68f25c Oct 24 14:27:28 localhost kernel: [183195.167942] pgd = 36f6b267 Oct 24 14:27:28 localhost kernel: [183195.179169] [2f68f25c] *pgd=00000000 Oct 24 14:27:28 localhost kernel: [183195.191263] Internal error: Oops: 805 [#1] SMP THUMB2 Oct 24 14:27:29 localhost kernel: [183195.204864] Modules linked in: brcmfmac brcmut…

Because I'm a glutton for punishment, I decided to test a bunch of PCDuino3 images. Hopefully this will be helpful for someone. Feel free to double-check my work. 3.X kernels work perfect. 4.11-4.14 no HDMI Audio 4.19-5.8 there's a bug where the console won't show up if you connect a high resolution screen. It complains about not enough memory reserved for the frame buffer. So if you have a blank screen, it's possibly working, but you just can't see anything. Also, still no HDMI audio even though it's built into the kernel. 5.9-current hangs at "Starting Kernel" showing in the serial port.

Hi all I have a project need high uart baudrate, > 2Mbit/S, how can I get this work, seems the stty not work correctly

I had to freeze my device on Kernel 6.1.92 & Bullseye to remain operational. Now trying to update/upgrade to Kernel 6.6.nn I run into following probs: 1) Using Armbian-config defreeze and subsequently switch to kernel 6.6.nn works OK 4me, but subsequent apt-get update/upgrade throws me back to kernel 6.1.104. Armbian-config has changed significantly w/ No other Kernel available. 2) Using Armbian-config defreeze, only and going directly to apt-get update/upgrade throws me back to kernel 6.1.104 as well and from Bullseye back to Buster! Its a mess! Will this eventually be corrected and when? RGDS

What happened? Orange Pi 3 LTS rarely recognize ethernet connection. How to reproduce? Flash Orange Pi 3 LTS with an image of the latest version of Armbian. Extra Info The latest images tested which worked flawlessly was: Armbian_community_25.11.0-trunk.437_Orangepi3-lts_trixie_current_6.12.47_minimal.img Armbian_23.8.3_Orangepi3-lts_jammy_current_6.1.53_minimal.img Images tested which didn't worked: Armbian_community_26.2.0-trunk.151_Orangepi3-lts_trixie_current_6.12.63_minimal.img Armbian_community_26.2.0-trunk.100_Orangepi3-lts_trixie_current_…

Hi, my installed version is about a year old at least...so I'd like to upgrade without loosing settings and data. Is this possible? If yes, how? In doc. there is only decribte how to update the kernel, nothing else... Thanks, Astro System says: root@cubie:~# cat /etc/issue Debian GNU/Linux CT Debian 2.7 wheezy root@cubie:~# cat /proc/version Linux version 3.4.104-sunxi (root@cubie) (gcc version 4.8.2 (Ubuntu/Linaro 4.8.2-16ubuntu4) ) #1 SMP PREEMPT Fri Sep 26 18:30:39 CEST 2014

Hello, this is my first topic on the forum. Please forgive my English is poor. I use Orange Pi PC, version Armbian_5.05_Orangepih3_Debian_jessie_3.4.110, with a patch to kswapd0: CMA-linux-image-sun8i_5.07_armhf.deb from this: https://github.com/igorpecovnik/lib/issues/219 SD card is: SanDisk microSDXC UHS-I 64GB speed up to 48MB/s (write speed in OPi is over 20MB/s). I have a problem that when writing to the card. For example, downloading a file by multiple instances wget. The SD card stops responding and crashes Opi. Only helps to disconnect the power supply. The card is new and fully operational. When I connect the monitor displays the following messag…

Hi, I've had a PcDuino3 for some time now, but I have barely used it because linksprite work was shoddy; so I never bothered to give the pcduino much time. I Also own a banana pi (A20), an O-DROID XU-4, several rPi's and an Orange Pi PC. All non rPi's are running armbian; you are all awesome for your work! I think I understand this problem with 4.x has something to do with the device tree .dtb files, but no clue what to do to get it to boot and display through HDMI. I'm actually wanting to use it as a headless server, but initial setup requires me to see the screen only because the onboard wifi is not working either (despite manually editing /etc/wpa_supplicant/wp…

Hi all, I am new to this forum. I just got a Orange Pi plus 2E. The specs are nice and the price is competitive. However, I don't seem to find an image with gpu working well. No hardware acceleration available. This means I cannot use chrome properly / watch videos / play web games with WebGL. From armbian website / logs: Mali OpenGL ES does not work on H3 boards with 2GB RAM (Orange Pi Plus 2, Orange Pi Plus 2e) Any idea when will the Mali driver work on 2GB RAM models? The OPi is nowhere near usable right now. Thanks!

Hello, i have an usb ethernet adapter recognized as (lsusb : Bus 005 Device 002: ID 0fe6:9700 Kontron (Industrial Computer Source / ICS Advent) DM9601 Fast Ethernet Adapter which is recognized and running fine on linux mint 17 ( kernel 3.16.0-38 - 52 ubuntu 14.04.01) but i can't find a way to make it work on any distro on OPi Lite. 1/ i tried nightly armbian xenial ( Armbian_5.27.170327_Orangepilite_Ubuntu_xenial_dev_4.10.3) , it ended up with a continuous message , a kind of kernel panic : [22.272075] dm9601 5-1:1.0 enx00e04c534458: kevent 4 may have been dropped 2/i tried armbian 3.4.113 and followed all instructions in this po…

Hello, my orange pi pc has recently started to have reduced speeds. Where I used to get the full 100Mbit on lan, I now get around 30Mbit, be it sftp, samba, http. Speed flanctuates a bit but stays around the 30MBit so no big differences. I am able to write with consistent speeds of over 10MB/s on the microsd so that can't be the problem (using dd) and full ~30MB/s on the attached sata disk. uname -a Linux orangepipc 3.4.113-sun8i #10 SMP PREEMPT Thu Feb 23 19:55:00 CET 2017 armv7l GNU/Linux Any ideas what I can check?

Hi All, I used armbian for a few month and it works pretty good for me. Everything start going bad since I update it with RAID 1.1 board. Current system: Cubietruck + RAID board + Armbian (actual Ubuntu Xenial next) The issue is that board do not want to accept HDDs without reformatting them in a first row, ok, I made a full backup and after new installation from SD to the RAID just restore it --> It does not boot up even if I change fstab and armbianenv.txt in a boot section. I change /boot/armbianenv.txt (or how it called) parameter UUID to SD card back and could boot again, but system is on SD card. I perform…

Hello, I have a main WinTV dualHD http://www.hauppauge.de/site/products/data_dualhd.html, unt wanted this under Debian Stretch with the image from here https://www.armbian.com/cubietruck/ Mainlaine Kernel, use, according to this page https://git.linuxtv.org/media_tree.git/commit/drivers/media/usb/em28xx?id=11a2a949d05e9d2d9823f0c45fa476743d9e462b or even this https://www.mail-archive.com/ linux-media@vger.kernel.org/msg113120.html this should work ha. However, when I plug in the stick, I get this message: dmesg https://pastebin.com/mtyLnARP I also tried this here https://wiki.ubuntuusers.de/v4l-dvb/ but also without success dmesg | grep -i dvb [25.680224…

Hello, Is any way to use the full cpu potential from the board. I have tried the environment settings from one of the threads where gpio-regulator-1.3v is introduced but without success. Thank you Sent from my D6503 using Tapatalk

Hi people, I have a problem after restarting my cubieboard, I had an installation in nand (older install with old files) and now I can not get it started. It is possible to mount that nand or repair it to restart ... Thank you

Hello, please help I moved ARMBIAN 5.60 stable Debian GNU/Linux 8 (jessie) 3.4.113-sun8i from 2Gb SD to 16Gb and cant do resize i tried everthing from others topics but it does not work anymore! (i need 3.4.113 for acpid) I put this scipt into /etc/init.d but it does not work sudo sh ./resize2fs start [....] Starting resize2fs (via systemctl): resize2fs.serviceJob for resize2fs.service failed. See 'systemctl status resize2fs.service' and 'journalctl -xn' for details. failed!

RT, i am trying to use git and aarch64 tools to compile a lastest u-boot by my own,but ,it failed. there're the steps i was doing: 1. downloads the latest u-boot source code from offical web: git clone git://git.denx.de/u-boot.git 2.downloads the ARM Trusted Firmware from offcial web: git clone https://github.com/ARM-software/arm-trusted-firmware 3.compile the ATF for BL31 by using this cmd: sudo make CROSS_COMPILE=aarch64-linux-gnu- PLAT=sun50i_h6 all and then move the BL31 file into the u-boot root fold. 4. compile the u-boot for H6 by using this cmd: sudo mak…

Dear All, first of all, i dont have any orange pi yet, want to have one, perhaps orange pi PC Plus. My main intention is to use as robotic experiment. i have some questions: - is orange pc plus GPIO compatible with raspberry one ? - does shield / module for raspberry works in Orange Pi ? - example : if i want to use "Pimoroni Explorer HAT Pro for Raspberry Pi", can it work in orange pi ? sorry if these euqestion existed before and sorry if wrong forum. thanks.

Hello! I have an Cubietruck with an attached SATA-Disk. I would like to use the board without an SD-Card (I don't see why I should use one when I have a nand and a Disk). I can boot u-boot-sunxi-with-spl.bin using FEL and Armbian boots successfully. I can write stuff to nand, but I didn't manage to write an working u-boot to nand. Is the SPL-Version the correct one or the one without? Do I have to write to something special like MBR? Where does the BROM search for the bootloader? Does it parse the partition-table? Thanks in advance!

I try connect 3.5' LCD screen, but i have error ---------------------------- Jan 4 12:24:38 pls-home kernel: [ 54.977794] fbtft: module is from the staging directory, the quality is unknown, you have been warned. Jan 4 12:24:38 pls-home kernel: [ 54.981924] fbtft_device: module is from the staging directory, the quality is unknown, you have been warned. Jan 4 12:24:38 pls-home kernel: [ 54.982417] fbtft_device: unknown parameter 'gpios' ignored Jan 4 12:24:38 pls-home kernel: [ 54.982696] spidev spi0.1: spidev spi0.1 1000kHz 8 bits mode=0x00 Jan 4 12:24:38 pls-home kernel: [ 54.982947] spidev spi0.1: spidev spi0.1 1000kHz 8 bits mode=0x00 …

Hi All, Can anyone help in setting up HifiBerry Digi + with Opi PC Plus with i2s0.The HIfi Berry is based on wm8804 codec and it acts as a master while i2s on Opi acts as a slave I havent any examples of using i2s in slave mode on H3 boards so just need some help. Kernel is 5.10.19 built with Armbian Build system. This is the driver I am using https://github.com/raspberrypi/linux/blob/rpi-5.10.y/sound/soc/bcm/rpi-wm8804-soundcard.c on my PC PLUS This is my dts: /dts-v1/; /plugin/; / { compatible = "allwinner,sun8i-h3"; fragment@0 { target = <&i2c0>; __overlay__ {…

Hi, A few weeks ago I downloaded the actual Debian Buster version without desktop. I installed the OS and moved the filesystem to the attached SATA disk. Finally I installed and configured Samba and tested it transferring files form my desktop. Everything worked fine except transferring relatively big files. The files (2 in total) giving problems were a about 3Gb. When transferring a big file the upload seems to stop. The ethernet connection with the BananaPi M1 is completely de-activated. There is only one solution to re-activate as far as I know: remove the power connector and resupply the board. After resupplying the board…

Hi, I try to install Armbian Bulleye on my Nanopi Neo Plus 2. Well it completed the install, but when it reboot, I keep getting kernel panic. I try installing with the official Friendly Arm image (kernel 4.14 though) and it was fine (both on SD card and EMMC). Below is the serial console dump, also it seems to crash in random places too. Any help will be greatly appreciated. =~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2022.12.09 21:53:09 =~=~=~=~=~=~=~=~=~=~=~= U-Boot SPL 2022.07-armbian (Nov 30 2022 - 10:43:13 +0000) DRAM: 1024 MiB Trying to boot from MMC1 NOTICE: BL31: v2.6(debug):af220ebb-dirty NOTICE: BL31: Built : 10:4…

Hello, I'm using a BPI M2 Zero (with H3 Chip) to control two relays on CON2-P05 / PA11 and CON2-P03 / PA12. During the boot process there is a high level present at the pins, which is driving the relays. Is there a way to create a DTB overlay to drive the pins to a low level during boot. My userspace application uses libgpiod to control the pins. I'm familiar with compiling and activating overlays, i would just need help to write the correct .dts file. Thank you very much in advance

My Banana Pi M2+ is running quite fine on noble but something is amiss with bluetooth. bluetoothctl never shows any devices even when scanning for them and there are plenty of devices within arm's length. I am hoping for your help in diagnosing and ultimately fixing the issue. Logs: Spoiler $ uname -a Linux banana 6.12.20-current-sunxi #1 SMP Sat Mar 22 19:54:28 UTC 2025 armv7l armv7l armv7l GNU/Linux $ bluetoothctl list Controller B0:F1:EC:FD:65:CE banana [default] [ the second line below at 14:20:17 is certainly odd ] $ sudo journalctl -u bluetooth [...] …

hi, I am th owner of a lamobo r1 card. Last days i'have tried more than 10 debian/bananian/ubuntu/raspian/openwrt image. Most of them work fine. Community image are often better than sinovoip one ... Unfortunatly, my sata HDD never work. I'm using a seagate 1TB SSHD. I currently using the armbian ubuntu image. At boot, the hdd spin up and stop, and ubuntu don't boot. If I remove the HDD everthing work fine. Anybody have a working hdd using the micro usb power port ? I use an ipad charger and a good one meter usb cable. Any help is greatly appreciated. If I should provide more details, please let me know Thanks agemio

Hi all, A week ago I started using the latest Armbian image (Legacy Desktop) for my Olinuxino A20L2. Since the switch from the Olinuxino A20 original image back to Armbian I noticed a lot of performance loss. Especially when surfing the web through Firefox on even simple pages is sometimes terribly slow. Anyone have an idea how to solve this?

Hello everybody I expose my problem ... I create my own a20 card ( based on olimex a20 lime) ( 90% similar ) I have no problem with the hardware ....all work except ....leds ( you know in /sys/class/leds ....) But i need 3 leds ... so i write this in dts file ( sun7i-a20-olinuxino-lime.dts) leds { compatible = "gpio-leds"; pinctrl-names = "default"; pinctrl-0 = <&led_pins_olinuxinolime>; green { label = "a20-olinuxino-lime:green:usr"; gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; default-state = "on"; }; red { label = "a20-olinuxino-lime:red:usr"; gpios = <&pio 7 0 GPIO_ACTIVE_HIGH>; default-state = "on"; }; blue { label = "a20-olinuxin…

There is problem with the internal wifi on Orange Pi Lite and Armbian 5.20 (5.16 too). I installed tshark (and tcpdump) and try to capture wifi packets in monitor mode. Without success. What's better. Aircrack-ng works flawlessly. I think, pcap library has a problem with switching the device to monitor mode. "dumpcap: The capture session could not be initiated on interface 'wlan0' (wlan0: SIOCGIWPRIV: Argument list too long)." 'iwpriv' command runs without error, but the private command list is really long. Buffer too small?? Dumpcap run with no errors on external USB wifi dongle (TP-Link TL-WN722N), so I think problem is in firmware of internal wlan chip…

Hi I have a suggestion to modify update-mot.d script 30-sysinfo. It reports battery chargin or not depending on percentage (if <100% then is charging): # Battery info for Allwinner # kernel 4.4+ axp_dir="/sys/power/axp_pmu" if [[ -e "$axp_dir" ]]; then status_battery_connected=$(cat $axp_dir/battery/connected) if [[ "$status_battery_connected" == "1" ]]; then status_battery_charging=$(cat $axp_dir/charger/charging) status_ac_connect=$(cat $axp_dir/ac/connected) battery_percent=$(cat $axp_dir/battery/capacity) # dispay charging / percentage if [[ "$status_ac_connect" == "1" && …

I built the newest image Armbian_5.24_Orangepiplus_Debian_jessie_3.4.113_desktop.img to work with my opi+2 board. I need 1280x1024 resolution and it works perfectly. However wifi connection keep asking password, but it worked well with Armbian_5.20_Orangepiplus_Debian_jessie_3.4.112_desktop.img. It's weird that wifi scanning worked well, just failed to connect. How do I fixed this problem? thx

Hi, I just acquired a couple of OrangePi zero's with the H2+ SoC and 512MB Ram. I tried to install the latest images for both Debian and Ubuntu burning then to microUSB with the regular dd command. The flash USB was a 32GB ebay cheap microUSB generic unbranded. I could not succeed at all in installing any distro, I even tried all the distros on the orangePi website. My strategy is to run the OPi headless, only connected to the ethernet cable, so no display at all. The symptons were always the same once powered (with a 1.2Amp phone charger) the OPi would start the blinking ethernet leds, on my router there was a new IP on the Lan but th…

I have opi2 + (debian server) marian@orangepiplus:~/FFmpeg$ cat /etc/*release # PLEASE DO NOT EDIT THIS FILE BOARD=orangepiplus BOARD_NAME="Orange Pi+" VERSION=5.24 LINUXFAMILY=sun8i BRANCH=dev ARCH=arm IMAGE_TYPE=stable PRETTY_NAME="Debian GNU/Linux 8 (jessie)" NAME="Debian GNU/Linux" VERSION_ID="8" VERSION="8 (jessie)" ID=debian HOME_URL="http://www.debian.org/" SUPPORT_URL="http://www.debian.org/support" BUG_REPORT_URL="https://bugs.debian.org/" I have gone through a lot of instructions, but without success. I always end up on: marian@orangepiplus:~$ sudo ffmpeg -i vlc.ts -pix_fmt nv12 -qp 20 -c:v cedrus264 -f null /dev/null ... Stream #0:6[0x140f]…

Hi there, I've just got my first H3 board (OPi Zero +2) and I'm interested in learning how boot process works in detail, with a focus on Security ID features. As far I can see there's not that much documentation about S/NBROM (essentially linux-sunxi's Wiki and Allwinner-info git repo) and what's supposed to be H3's NBROM (header 1100, 1100, 1633) looks like slightly different from A10's one (from git) at first glance. Is there anyone here who has already worked on it and/or has info/symbols/pseudocode/whatever might speed up the reversing process? Thank you!

Hi I want use spi in slave mode, how i can enable slave? cat /boot/armbianEnv.txt verbosity=1 console=serial overlay_prefix=sun50i-h5 overlays=spi-add-cs1 spi-jedec-nor spi-spidev param_spidev_spi_bus=0 param_spidev_max_freq=100000000 rootdev=UUID=47313251-44b3-4a77-aef5-c53397e3a685 rootfstype=ext4 usbstoragequirks=0x2537:0x1066:u,0x2537:0x1068:u

I'm trying to get an MCP2515 working with an Orange Pi Zero LTS H2+. Everything seems to go well until I try to bring up the can0 interface using the command ip link set can0 up type can bitrate 500000 Once the command is entered, it never returns. Control+C doesn't do help. New SSH sessions fail to start, but pinging the IP address works fine. Trying ifconfig from the serial terminal will also fail to return. Trying to shutdown after the "ip link set..." command, the shutdown procedure takes a long time, and eventually sends [ 4320.026984] systemd-shutdown[1]: Waiting for process: ifdown, wpa_supplicant, NetworkManager, …

Hi, I have used the official armbian focal image for orange pi PC (https://www.armbian.com/orange-pi-pc/) The issue is in the armbian-config navigate to system -> Hardware you see nothing as shown below Please find the monitor log http://ix.io/2WQv

I had an OrangePi Zero LTS and set up an access point using the following commands: % sudo apt install dnsmasq-base -y % sudo sed -i "s/#MulticastDNS=no/MulticastDNS=yes/g" /etc/systemd/resolved.conf % sudo nmcli connection add type wifi ifname wlan0 con-name access_point autoconnect yes ssid <ssid> % sudo nmcli connection modify access_point 802-11-wireless.mode ap 802-11-wireless.band bg ipv4.method shared % sudo nmcli connection modify access_point connection.mdns 2 % sudo nmcli connection modify access_point wifi-sec.key-mgmt wpa-psk % sudo nmcli connection modify access_point wifi-sec.psk "<password>" % sudo nmcli connection up access_point % sudo host…

Hello, electronics enthusiasts, I can't figure out how to activate the i2s bus and enable audio input and output, for example pcm5102(DAC) and pcm1808(ADC) My board Nano pi neo2

I managed to start de A5E from nvme, but upgrading the packages fails. Installing armbian-firmware_26.8.0-trunk.125_all.deb failed With: data.tar lzma error.... Several months ago I got the same error but ignored it. Now everything is almost working, I tried to find out what went wrong. I can extract package with dpkg-deb -x on another system. MD5sum is the same on A5E and other system. This problem occurs on sdcard and nvme card. Btw: it is the 4G version of the A5E. Any idea how I can solve this?

Hello, I want to set the boot argument 'threadirq' in the /boot/boot.cmd file for kernel 4.04. I added the option and created the boot.src file described in FAQ. When I boot the system I get kernel panic, because rootfs not found. If I revert the boot.src to default, it works fine. The file looks like this: setenv bootargs console=tty1 root=/dev/mmcblk0p1 rootwait threadirqs .... Is it possible to do it this way? Thanks, Timo

HI, I'm testing Debian wheezy, for now work well but i cant use LCD How do I change display out ?...in olimex image I had some script like ./change_display Thanks

I have an Orange Pi PC that I bought from eBay a while ago and it works absolutely fine, has done for a month or so now. I have just bought 5 more from Xunlong's Aliexpress store, they arrived very quickly, however they don't appear to boot... Power rails are fine, 24MHz clock is fine, reset line is fine, fel mode registers with my PC fine, however no UART output, no apparent attempt to boot from the SD card. If boot it with the SD card in, I get absolutely nothing, if I boot it without the SD card, it gets into FEL mode and I can talk to it with sunxi-fel nick@nick-desktop:~/sunxi-tools$ sudo ./sunxi-fel ver AWUSBFEX soc=00001680(H3) 00000001 ver=0001 44 0…

Hi, am new on orangePI, Hope my question is not to dumb. I am using the Armbian_5.05_Orangepih3_Debian_jessie_3.4.110.raw image. Kernel is Linux orangepipc 3.4.110-sun8i #18 SMP PREEMPT Tue Mar 8 20:03:32 CET 2016 armv7l GNU/Linux I want to access a serial device connectet to the pins 8 and 10 on the GPIO connector, described at uart 3. /dev/ttyS0 is the 3 connector pin close to the power plug. there is no /dev/ttySn with n>0 and the /dev/ttyGSn are also not the ones to use. How can I create the right device? Same about the IR receiver, Is there any device that represents the IR receiver? Are there modules to load? thanks a lot for help

I have a little problem: my fstab: root@osirisBpiM3:~ # cat /etc/fstab /dev/mmcblk0p2 / ext4 defaults,noatime,nodiratime,commit=600,errors=remount-ro 0 1 tmpfs /tmp tmpfs defaults,rw,nosuid 0 0 /var/swap none swap sw 0 0 //192.168.0.11/media /mnt/openelec/media cifs iocharset=utf8,credentials=/root/.smbcredentials,uid=1000 0 0 //192.168.0.11/media2 /mnt/openelec/media2 cifs iocharset=utf8,credentials=/root/.smbcredentials,uid=1000 0 0 //192.168.0.11/big850gig /mnt/openelec/big850gig cifs iocharset=utf8,credentials=/root/.smbcredentials,uid=1000 0 0 //192.168.0.2/C$ /mnt/sophie/c cifs iocharset=utf8,credentials=/root/.smbcredentialssophie,uid=1000 0 0 //192.168.0…

Hi, I'm new user. I want to install owncloud in my orange pi+2. Someone can help?

Hi: I am confused. The current armbian for cubietruck is still:Armbian_5.20_Cubietruck_Debian_jessie_3.4.112_desktop-2.7z but on the download page it states that version 5.23 is the latest version. What should I do to get the latest version? (as of today Nov. 13,2016

Nice new board with AllWinner A64, quad core 64bit A53, priced at 25$ -> http://www.friendlyarm.com/index.php?route=product/product&path=69&product_id=159

Please tell me what to write in the program, so that it was connected by SPI1? import spidev ... """ An APA102 LED is addressed with SPI. The bits are shifted in one by one, starting with the least significant bit. ... void show() Sends the content of the pixel buffer to the strip. Todo: More than 1024 LEDs requires more than one xfer operation. """ def show(self): self.clockStartFrame() self.spi.xfer2(self.leds) # SPI takes up to 4096 Integers. So we are fine for up to 1024 LEDs. self.clockEndFrame() """ void cleanup() This method should be called at the end of a program in order to release the…

I'm trying to use an OrangePi Zero as an Alexa device, using github.com/alexa-pi/AlexaPi. This is headless, but I need analogue out and in. Given that it's headless, I thought I'd use the mainline kernel instead of headless. Everything installs fine, but ALSA does not see anysound card hardware. aplay: device_list:268: no soundcards found... I can try legacy, but I'd prefer to use mainline if possible.