Allwinner sunxi

Hi, I have Cubietrauck and I installed legacy Jessie on SD card and after configuration hostapd for using it as access point only 5 devices were able to connect to my device. After search I’ve added max_num_sta=20 but it didn’t solve my problem. I tried to use other distribution like vanilla Jessie and vanilla trusty server but I had same problem. Here is my hostapd configuration: How can I change max devices connection? Is this problem relate to the wifi module and how can I fix it?

Hello all, i 've followed the steps from "sudo armbian-config" to create a hotspot. The hotspot is well created but doesn't start on next boot. I have to go back to armbian-config/manage hotspot to start it.. How can i do to get the hotspot autostart? With best regards Thanks Pierre Orangepi+2e with armbian 5.38 Ubuntu desktop

Hello, i reinstalled the latest version of armbian with jessie on the cubietruck, on UART0 (ttys0) i plugged in a razberry but since the last version it is not recognized and does not turn on. Is it possible that UART0 is inactive? I have found on this forum for OrangePi with script.bin but not for cubietruck Where is script.bin ? thank you

How can I build custom image for Orange Pi PC? I'm trying with: https://github.com/loboris/OrangePi-BuildLinux I following the instructions: First, I edit params.sh: ONLY_BASE="yes" And when I run sudo ./create_image then I got this error message: chroot: failed to run command `/bin/bash´: No such file or directory What can I do to finish the process correctly?

Hi guys, Great work you are doing here, giving a second source for all kinds of fruits :-). My question: I like to have a "non desktop, no gui" = headless server with an armbian kernel >= 4.1 for the OrangePiOne to free up my expensive/more universal RPi2 for other tasks. I need a linux kernel >= 4.1, so it recognizes my DVB-C (T230) and DVB-S2 (S960/TT4600) that work with RPi2 as a headless TvHeadEnd SAT>IP server. TvHeadEnd itself works fine on your armbian kernel 3.4.110, but USB cards need a higher kernel level. I succeeded to compile myself with your tools and good explanation, got output, but the image does not startup, no video, no lights…

Hi friends, need for your advice and experience. How can i disable а boot from sd card after moving Armbian(latest vesion) to EMMC? My board is Orange Pi Plus 2e. I would like to use sd card in Armbian, but a boot terminated each time when a card is inserted. Any advice or a link? THANK YOU!

I tried to download the Opi plus 2 Image in armbian download page, but it linked In to Opi plus which is older hardware. There Are only plus 2e and plus Image. Here is the link : https://www.armbian.com/orange-pi-plus-2/ How can I get the image of Opi plus 2 ?? Plz let me know:(

Hi, I am using Armbian_5.20_Orangepiplus_Debian_jessie_3.4.112.img with emmc nand flash. I want to make .img file for emmc nand flash. because i am plan to use Phoenixsuit tool.. how can i make emmc nand flash image file? please help me.. thanks.

Hi, I have an Opi+2 board and I want to overclock it. Assuming that I have a proper cooling, how can I do that? I want to overclock it to 1.6Ghz.

I have good temps and was thinking to overclock it but have no idea how to do it.

Hi, I use an OrangePi Zero as a race timer for a car. It is powered from the car. So when the car starts the OrangePi gets power and boots and when the car is turned off the OrangePi loses power and "turns off". This isn't ideal but I don't have a lot of options. I feel like this is a fairly common use case for electronics in cars especially ones like race timers etc. Unless I have a battery as well. I was wondering what are the best things to do to protect against the sudden power loss so that I don't corrupt anything? Is it possible to make parts of the file system read only maybe? All I do with the OrangePi is run a C++ application, it use…

I am trying to set up a video loop that runs continuous on boot up

I'm trying to set the Pin G11 on a NanoPi Neo, previously configured as input, to output in C++ by mapping the PIO function register into the virtual memory with mmap and setting a single bit. As per the Allwinner H3 Datasheet the following hardware addresses are specified: Similar to the Raspberry Pi's function register, the Pin knows at least two states: 000: input 001: output ... In my Script, I'm therefore trying to set the 12th bit of the PG Configure Register 1. Here's my C++ code: struct peripheral { unsigned long addr_hardware; int map_size; int mem_fd; void *mem_map; volatile unsigned long *addr_virtual; int …

Hi everyone, As the title, I would like to set the isolated cpu 3th on orange pi zero (armbian v4.19.62) I've try to follow this answer of ChrisK in the topic here And the boot.cmd file after edited as below: # DO NOT EDIT THIS FILE # # Please edit /boot/armbianEnv.txt to set supported parameters # setenv load_addr "0x44000000" setenv overlay_error "false" # default values setenv verbosity "1" setenv console "both" setenv disp_mem_reserves "off" setenv disp_mode "1920x1080p60" setenv rootfstype "ext4" setenv docker_optimizations "on" setenv devnum "0" setenv rootdev "/dev/mmcblk${devnum}p1" setenv bootargs console=ttyS0,115200 noinitrd root=/dev/m…

I think 16 seconds is the max. value of the watchdog timeout of H2/H3, However, I cannot set it to 16 seconds. When watchdog-timeout = 16 in /etc/watchdog.conf, the timeout is 11 seconds : /etc/watchdog.conf max-load-1 = 24 watchdog-device = /dev/watchdog realtime = yes priority = 1 watchdog-timeout = 16 interval = 3 root@orangepizero:~# systemctl status watchdog.service ● watchdog.service - watchdog daemon Loaded: loaded (/lib/systemd/system/watchdog.service; enabled; vendor preset: enabled) Active: active (running) since Mon 2018-01-29 11:10:27 HKT; 3min 31s ago Process: 851 ExecStart=/bin/sh -c [ $run_watchdog != 1 ] || exec /usr/sbin/wa…

Hello, I have spend a lot of time trying to make it work I2C PL0/PL1 of orangepi zero plus 2 H5. I change sunxi-h3-h5.dtsi to status="okay" and i can not to see i2c PL0/PL1 only I can see others i2c. Can anybody help me to understand what I am doing bad? Spoiler r_i2c: i2c@1f02400 { compatible = "allwinner,sun6i-a31-i2c"; reg = <0x01f02400 0x400>; interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&r_i2c_pins>; clocks = <&r_ccu CLK_APB0_I2C>; resets = <&r_ccu RST_APB0_I2C&g…

I can boot fine with console connected. when I disconnected console ,boot will not finish. then I connect console ,terminal will show > > how could I boot without console connected?? thanks help~~ ------------------ ARMBIAN 5.50 user-built Ubuntu 16.04.4 LTS 3.4.113-sun8i

Hi there, how do I configure / start an WiFi AP on OPi3? In armbian-config (found using google, and found on OPiPC+) from my current Buster (OOB + update / upgrade) there is NO option to set up an AP. I may configure it "manually" (edit config files) but I need some tutorial if there is no "menu style" config.

Hi everyone! That's getting me off... I though it was plug&play but didn't, Anyone can help me giving me the solution to this problem? Thank you very much Kind Regards

Hi, I am having doubts on how to use I2C ADS1115 unit on Orange Pi Lite. I already have I2C module and tools installed (see below). Thing is, where do I get the Phyton library to make use of it? Are there any examples? The other question is about wiring. When I connect to twi0 I cannot see the I2C device: root@orangepilite:~# i2cdetect -y twi0 0 1 2 3 4 5 6 7 8 9 a b c d e f 00: -- -- -- -- -- -- -- -- -- -- -- -- -- 10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 30: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 40: -- -- --…

How do I copy sdcard image to nand . I tried to use the ./nand-sata-install script and it returns the following message " There are no targets. Please check your drives. "

Hello, sorry if this might seem stupid. I have an Orange Pi Zero Board. I have an armbian running on it (jesse). I have an usb-wifi-adapter connected to the onboard-usb-jack. 'lsusb' sais: I cannot see the device by typing "ifconfig -a" wlan0 is shown (onboard-wifi), but where`s my expected wlan1 ? I tried: "apt-get install firmware-realtek", but it sais: What am I missing?

Hello Everyone, I have an Orange Pi 3 and I want to wipe the default OS and replace it with Armbian. It has some foreign default OS which appears to be Android based and without a word of English. The Armbian documentation wasn't much help because it didn't provide any instructions for this sort of hardware. If any of you could give me some pointers that would be very much appreciated.

I've already enabled audio-codec in the overlays section I've checked https://linux-sunxi.org/Linux_mainlining_effort#Status_Matrix and saw that audio-codec is supported for h3 since 4.10 Required Information: Linux orangepizero 4.11.9-sun8i #3 SMP Sat Jul 15 00:20:53 CEST 2017 armv7l armv7l armv7l GNU/Linux -->arecord -l shows this pi@orangepizero:~$ arecord -l **** List of CAPTURE Hardware Devices **** card 0: Codec [H3 Audio Codec], device 0: CDC PCM Codec-0 [] Subdevices: 1/1 Subdevice #0: subdevice #0 --> running the following command will just hang all the way till ctrl+c is entered pi@orangepizero:~$ arecor…

I keep my Lime2 updated with apt-get update/apt-get upgrade, but it does not upgrade the u-boot, that is still an old version: U-Boot SPL 2015.07-armbian-sun7i (Oct 11 2015 - 17:17:10) DRAM: 1024 MiB CPU: 912000000Hz, AXI/AHB/APB: 3/2/2 Because the network speed is not that fast, I suspect this could be solved with a more recent u-boot. How do I update the Lime2 bootloader to a recent u-boot without re-downloading an image and re-installing all my software and data? It looks like there is already a recent u-boot.bin file on the system... # ls -l /usr/lib/nand-sata-install/a20/bootloader/linux/ -rwxr-xr-x 1 root root 152 May 23 22:35 linux.ini -rw-r--r-- 1 root…

Before I buy an AV cable for my orange pi zero I'd like to know how kodi performs on this board. I have this board and I'm thinking of running kodi if it's good enough to run it. If you've run kodi on the orange pi zero please let me know your thoughts about it.

Hello, I have the LIME2 board from Olimex (A20 SoC). I tried writing the image Armbian_5.20_Lime2_Debian_jessie_4.7.3_desktop to an SD card with dd. However, nothing happens when I plug in power (except that a red light near the barrel jack connector turns on). I tried pressing some of the switches (reset, power) but they didn't do anything either. This is the second LIME2 board I have received that just won't turn on. I have also tried with the images recommended by Olimex, to no avail. Is there something special that needs to be done that I'm missing?

hi, I'm trying to use an OrangePiPC2 H5 processor on an old TV. I have got to edit the dts file but I dont know what to change to antivate RCA video & audio output. Plz, help me to set RCA port as default or give me links to learn to edit dts, I've seached a lot but found nothing. thx

Got Orange Pi Plus 2 and LCD 5"monitor Waveshare. Use armbian OS 5.14 on Debian Jessie 3.4.112. All good with 800x480 resolution, but still cant use touchscreen. Will be happy if you help me with it: Monitor got interface 1, 17 3.3V Power positive (3.3V power input) 2, 4 5V Power positive (5V power input) 3, 5, 7, 8, 10, 11, 12, 13, 15, 16, 18, 24 NC NC 6, 9, 14, 20, 25 GND Ground 19 TP_SI SPI data input of Touch Panel 21 TP_SO SPI data output of Touch Panel 22 TP_IRQ Touch Panel interrupt, low level while the Touch Panel detects touching 23 TP_SCK SPI clock of T…

I met a problem that kernel showed allwiner H6 ethernet internal error. link: It is hard to loacate what makes that error occur, I wish that kernel can show my log added to drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c. my work below: 1 Added printk to drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c, and made patch with git format-patch, move patch to userpatchs/kernel/sunxi-next. 2 run ./compile.sh to compile armbian, I am sure that patch work, have checked drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c after compile.sh completion 3 burn Armbian_5.71_Orangepioneplus_Ubuntu_bionic_next_4.19.13_desktop.img to sdca…

Hi I want use spi in slave mode, how i can enable slave? cat /boot/armbianEnv.txt verbosity=1 console=serial overlay_prefix=sun50i-h5 overlays=spi-add-cs1 spi-jedec-nor spi-spidev param_spidev_spi_bus=0 param_spidev_max_freq=100000000 rootdev=UUID=47313251-44b3-4a77-aef5-c53397e3a685 rootfstype=ext4 usbstoragequirks=0x2537:0x1066:u,0x2537:0x1068:u

Hello, I have a Orange Pi PC. I want to boot the system from usb. How can I do this with the armbian distro? Or can anybody give me a link to a tutorial. (sorry for my english, I'm french)

Download sunxi-tools tool: git clone git://github.com/linux-sunxi/sunxi-tools.git cd sunxi-tools make ...yadayada you might have errors but look for "sunxi-fexc" cp /boot/bin/orangepipcplus.bin . sunxi-fexc -I bin -O fex orangepipcplus.bin orangepipcplus.fex nano orangepipcplus.fex Line 354: (yours may be different.) hdmi_used = 1 to hdmi_used = 0 Convert back to .bin with: sunxi-fexc -I fex -O bin orangepipcplus.fex orangepiEES.bin cp orangepiEES.bin /boot/bin/ cd /boot/bin/ mv orangepipcplus.bin orangepipcplus.not mv orangepiEES.bin orangepipcplus.bin reboot

HI I noticed that the Windows 10 on Arm version has the ability to install on mini-pc, like the raspberry pi. My question is, is Windows 10 capable of being installed on the BOARD WITH h5 processor? I USE OF QEMU-KVM FOR INSTALL WINDOWS ON MY ORANGE PI BOARD BUT IT HAS VERY LOW PERFORMANCE AND QEMU ONLY USE OF ONE OF H5 CPU CORE . Is it possible to install on orange pi pc2 armbian and Windows operating systems at the same time with dual boot?

I'm looking to add two ENC28J60 Ethernet interfaces to my OPI, does it have two SPI interfaces available? From my reading, it appears the onboard NAND flash takes up one SPI interface, but I cannot find any information on whether there is 1 or 2 other SPI interfaces available?

I recently got an Orange Pi Zero 3W, and I noticed that the official Ubuntu image is still based on the sunxi BSP stack, using the sun60iw2-6.6.98 kernel, while the bootloader is also using an older version of U-Boot. Right now, I’m wondering whether it would be feasible to use AI agents to help compile an Armbian image for the Orange Pi Zero 3W with a mainline kernel, while still keeping the old vendor U-Boot for compatibility. Has anyone here experimented with a similar approach or have any good suggestions or ideas? I also really hope the official team can eventually provide a proper Armbian image for the Orange Pi Zero 3W, because I’ve run into quite a few i…

I install Jessie server armbian on orange pi and install wiring op on it from this link https://github.com/zhaolei/WiringOP and for test interrupt I use this example form https://github.com/ngs/wiringPi/blob/master/examples/isr.c as he said for test use gpio mode 0 up gpio mode 0 down in terminal , I did this and it just print waiting... my question is , Is wiringPiISR working on orange pi one? If the answer is yes, what should happen in this example? If the answer is no ,what can use instead of wiringPiISR ?

Hi guys , I am a newbie for armbian. I want to set my Orange Pi One as NAT server via USB connected to IPhone or Android Samsung . -------- Frist , I try to install Armbian_5.30_Orangepione_Ubuntu_xenial_default_3.4.113 Second, sudo apt-get install ipheth-utils Third, Connect to my iphone 5s via USB port and start my hotspot BUT I failed to set my phone as hotspot , I can't ping to www... I don't know what's wrong ? May any one give me a hand

I need small serwer and i need a AP wifi and dhcp for wifi clients. Anybody can help me and show configuration file to setup Wifi Hotspot and dhcp program (meybe dns lokaly for better communication, my eth0 is slowly) I using Orange Pi Zero

Hello guys! I'm beginner of Armbian. The problem is: Install Armbian Stretch mainline kernel 4.14.y on my device(Orange_Pi_PC),But I don't know how to enable UART1 . I tried to select UART1 & UART2 & UART3 on armbian-config,now i can see 'overlays=uart1 uart2 uart3' in /boot/armbianEnv.txt Connect serial device with P40(RX) P39(GND) P38(TX) . when i check serial device on ssh, i can see this info: uname -a Linux orangepipc 4.14.84-sunxi #3 SMP Sat Dec 1 07:18:41 CET 2018 armv7l GNU/Linux ls -l /dev/ttyS* crw--w---- 1 root tty 4, 64 Dec 4 20:24 /dev/ttyS0 crw-rw---- 1 root dialout 4, 65 Dec …

Hi! My Banana pi Pro with Armbian v5.20 does not boot since i issued a 'init 1' command. While booting, it show only that; Starting kernel ... Uncompressing Linux... done, booting the kernel. How to activate the boot debug mode. I tried many keyboard keys without success. Thank you!

Hello! I am on the forum to ask you some questions that I am not able to find the answers to. I bought a 3D printer kit on Aliexpress.com including an Orange pi 3 LTS board. On the card there is an operating system installed and several applications for the printer. The first problem is that: I would like to activate WIFI on the card. I tried to do this via 2 different ways. The first is with the following command sudo orangepi-config. I go to the network/wifi menu. I chose my WIFI network. I enter the network key and I receive the following error code: Could not activate connection: Activation failed: IP configuration could not be reserved (not available addres…

Hello again... How can I activate the wifi network? I have a nanopi neo plus 2 with wifi, but armbian don't find it. Ifconfig and nmtui don't find the wireless connection. Thank you

I am a relatively new Linux user and I currently have a orange pi PC. There are some games not in the official repository I would like to compile. When I do so could I add them to the repository here?

Try to use a DTS file to add bluetooth reset gpio control to rfkill, but `rfkill list` doesn't show "sunxi-bt". /dts-v1/; /plugin/; / { compatible = "allwinner,sun8i-h3"; fragment@0 { target = <&pio>; __overlay__ { bt_pwr_pin: bt_pwr_pin@0 { pins = "PG13"; function = "gpio_out"; }; }; }; fragment@1 { target-path = "/"; __overlay__ { rfkill_bt { compatible = "rfkill-gpio"; pinctrl-names = "default"; pinctrl-0 = <&bt_pwr_pin>; reset-gpios = <&pio 6 13 1&g…

Hello! In order to compile software on my Banana Pi running Armbian 5.27 Debian 8, I started off uncommenting the "# deb-src" lines in /etc/apt/sources.list and then ran apt-get update and apt-get upgrade. The start screen in the shell would then ask me to reboot as the kernel was updated. But after the reboot there was no AppleTalk anymore to serve my old devices. Compiling a newer Armbian with an up-to-date version of Debian is of no use to me as I run software (A2SERVER) that is incompatible with newer systems. So how can I upgrade my system without loosing AppleTalk (which I configured as a kernel module when compiling two years ago)? …

Hello, I'm buliding a music player for my old car using Orange Pi PC Plus. I would like to use external incoming logic levels (3.3V / 0V) to wake up the OPi from suspend state. Could you help me how to do that? Waking up using the HW button SW4 is working perfectly. I need to do this using external logic signal connected to PA11 / GPIO pin #5. I tried the following setting in fex editor: [gpio_power_key] key_used = 1 key_io = port:PA11<6><default><default><0> It doesn't work. I keep the pin on HIGH (3.3V) normally, and when I bring it to LOW state, OPi won't wake up. I tried also ch…

Hey everyone... I have an Orange pi zero Plus2 h5. The SD card load and boot is working fine. However, i just realized i have no way to connect a keyboard and mouse to it to finish the setup. Is there a way around this like possibly inserting the armbian formated sd card into a linux system and changing config files?? If not, how can i attach a usb port to it?? Thanks.

I'd love to backup my X2 before I start to mess it up just to have a restore point somewhere at the start. Is it possible with a live linux and dd if / of?

In the context of this topic, after removing network-manager and configuring the network "the old way", via /etc/network/interfaces, what is the proper way to make sure that the WiFi radio is not emitting? I plan to place my OPi Zero next to the router (wired connection) and I want to make sure there's no unneeded radio interference. My /etc/network/interfaces: auto lo iface lo inet loopback auto eth0 iface eth0 inet dhcp

I'm trying to boot my Nano Pi Neo 2 from the network but I am a bit stuck. I have found out how to add network support to u-boot for the Nano Pi Neo 2, I can set the serverip and perform the dchp command, the Nanopi neo get's an IP address from the DHCP server but then booting halts with the message that it can't find the file. I'm pretty sure the location & access rights are valid. (Is there an easy way to check?) U-Boot 2018.09-rc3-00026-g4cdeda511f-dirty (Sep 10 2018 - 16:37:11 +0200) Allwinner Technology CPU: Allwinner H5 (SUN50I) Model: FriendlyARM NanoPi NEO 2 DRAM: 512 MiB MMC: SUNXI SD/MMC: 0 Loading Environment from FAT... Unable to use mm…

Good day, Is there a manual how to do that with the latest Armbian versions? Since my SBC have internal NAND and SSD installed, but still need a SD card to boot fom it?

Hello, I have a fully working customized Armbian on OrangePi PC Plus. There are two partitions, one for the rootfs, second mounted as /home I want to convert the root partition to squashfs, and use the squashfs file to boot from. I already converted the root partition to squashfs file, I can mount squashfs file, and the contents are correct. I even tried to mount it via fstab and it works. I searched everywhere, obviosly not enough, but I cannot find a way to boot directly from the squashfs file. The idea is to have only squashfs file and rw partition for /home Please, can somebody help me, or point me to the right instructions ?

I have installed the latest stable Ubuntu desktop Legacy on BPI M1. The OS boot directly into the GUI. I am planning to use xrdp to remote desktop into OS from windows machine on same network. So I think it will be a good idea that BPI to boot directly into console to save some memory. If I need GUI then I can remotely connect from a windows machine. Is it a good approach? If yes, then how to configure to boot into console with minimum memory footprint.

I can download armbian source code and build. Is there a way to build kernel only for my board NanoPi M1? I haven't tried building Debian, from wiki.friendlyarm.com building kernel only can be done by: ./build.sh -p sun8iw7p1 -b nanopi-h3 -m kernel Is there an equivalent option for armbian? Thanks.

Hi everyone. I have nano pi neo core 2 with ARMBIAN 5.75 stable Debian GNU/Linux 9 (stretch) 4.19.20-sunxi64. I try to change i2c speed from 100 000 to 400 000. I try: sudo fdtput -t i sun50i-h5-nanopi-neo-core2.dtb i2c0 clock-frequency 400000 Error at 'i2c0': FDT_ERR_BADPATH Anyone have idea how to change i2c speed?

Hi, tried to find files for motd but /etc/motd is empty. Can you tell me where to configure motd? Thanks

Hi all I have a project need high uart baudrate, > 2Mbit/S, how can I get this work, seems the stty not work correctly

Hi I'm a newbie to Armbian and just got the Orange Pi Zero. I want it to behave as a keyboard on the OTG port. Right now it works as a serial console. I cant find any docs on this anywhere and I'm not clued up on Linux to mess around too much Can any one help? Thanks in advance.

Hello! I've built my own sbc using the Allwinner H3 chip, and I'm looking to get a custom armbian image running on it. I've already successfully compiled an image by adding a new config to u-boot and armbian-build, and a device tree to the linux kernel. Now I'm looking to get the WiFi working, but I can't seem to find where I can change its pin definitions. I'm using the AP6212: the SDIO pins are connected to SDC1 (aka mmc1) like every other board, but the WL_REG_ON (aka WL-PMU-EN) and WL_HOST_WAKE (aka WL-WAKE-AP) pins are connected to GPIO pins different from all other boards, so I'll need to change their pin assignments in the kernel manually. B…

I tried as described in the manuals Lubuntu: 1)sudo apt-get update 2) sudo apt-get install plymouth-theme-* 3) sudo update-alternatives --config default.plymouth 4) sudo update-initramfs -u As a result, all the same boot black console rather than graphical theme. Please help us understand how to make the graphics theme at startup and reboot.

Hello, I have "destroyed" my actual Kernel with TV Carddriver from here DVB Sky Website, ( the Media build ). Now the system dont found the TV Card and dont load the correct drivers. I wish to start the "old" Kernel (4.13.16) - delete the actual Kernel (4.14.15) with my problems - and install the Kernel 4.14.15 new ... Did you see what I will do - is it possible ? Can you help me please ? I found this - is it so easy ? apt-get install --reinstall linux-image-$(uname -r) Hardware: Cubietruck uname -a Linux wetterserver 4.14.15-sunxi #28 SMP Mon Jan 29 07:24:48 CET 2018 armv7l armv7l armv7l GNU/Linux ll /usr…

SBC is banana pi M1 I tried the banana pi at church today, things went great as for the Libreoffice impress presentations but it was hard to navigate to menus because the banana's resolution was set to 1920X1080p. Everything was too small in the projector, we need something like 1280X1024 or 800X600. I tried `a10disp changehdmimodeforce 4` to change it to 720P, on the projector but display became unstable and I had to reboot to get it back. We have two modes for projector, VGA (HDMI->VGA converter cable) or plain HDMI. Today I tried the VGA but we can also do HDMI. Please help. Thanks.

Debian GNU/Linux 9 orangepizero ttyS0 orangepizero login: root Password: Last login: Tue May 8 23:46:23 UTC 2018 on ttyS0 ___ ____ _ _____ / _ \ _ __ __ _ _ __ __ _ ___ | _ \(_) |__ /___ _ __ ___ | | | | '__/ _` | '_ \ / _` |/ _ \ | |_) | | / // _ \ '__/ _ \ | |_| | | | (_| | | | | (_| | __/ | __/| | / /| __/ | | (_) | \___/|_| \__,_|_| |_|\__, |\___| |_| |_| /____\___|_| \___/ |___/ Welcome to ARMBIAN 5.44.180506 nightly Debian GNU/Linux 9 (stretch) 4.14.39-sunxi System load: 0.08 0.17 0.08 Up time: 3 min Memory usage: 17 % of 240MB IP: 192.…

Hi , there I am trying to write a program which will detect the presence of SD Card in Nano Pi M1 plus device. There are many ways to do this either by doing fdisk -l or looking into /dev/mmcblk* . But I want to keep running it in a loop and doing fdisk -l and grep doesn't seems an appropriate way. Can the insertion or removal of SD cards be checked via Hardware Interrupts? Plz. help me I am a newbie. Thank in advance.

Hi, I am trying to write a program which will detect the presence of SD Card in Nano Pi M1 plus device. There are many ways to do this either by doing fdisk -l or looking into /dev/mmcblk* . But I want to keep running it in a loop and doing fdisk -l and grep doesn't seems an appropriate way. Can the insertion or removal of SD cards be checked via Hardware Interrupts? Plz. help me I am a newbie.

Hi, I want to monitor the temperature of my Orange Pi PC's during some operation. When i login it shows the temperature. How to check the temperature after login? Regards, -- Avinash

Hi I need to execute some command when system is going down for halt/poweroff. I need to know this inside my script /etc/init.d/myScript which is called when system is going down. I used to do it by checking $runlevel variable and if it is set to 0, then system was going down for halt, it was working for instance in Raspbian a few years ago. However, in my Linux cubieboard2 4.9.12-sunxi Armbian this variable is not set, and when I execute "runlevel" command inside "STOP" case in myScript it says it is in N 5 runlevel which is not true because I have executed poweroff All tips are welcome Best Regards Marek

Hi, Just as my last post. I want to know if it is possible to wakeup opi3 after I switch its state to "mem" or "disk" using gpio on CON12. I have doing some reasch but I don't know if it is right: PL/PM port can be used as wakeup source. PF/G/H/L/M port support interrupt event. PC/D didn't support interrupt. But when I try to write a device tree file, but it just report some error with error code -22. My device three is like this: /dts-v1/; /plugin/; / { compatible = "allwinner,sun50i-h6"; /* * This fragment is needed only for the internal pull-up activation, * external pull-up resistor is highly recommended if using long wires */…

Hello guys. I need prepare a lot of cards. Is there any way how to chroot img? I use this setup for raspbian http://sentryytech.blogspot.cz/2013/02/faster-compiling-on-emulated-raspberry.html but armbian have only one partition and that is too much voodoo for me.

TRYING TO CLONE EMMC FROM ONE NEO CORE INTO ANOTHER. I found this link below : https://github.com/zador-blood-stained/fel-mass-storage I still don't know if it works since i had to enter FEL MODE which i could not. maybe i am trying in a wrong way. SO how could i get a clone EMMC of nanopi neo core (taking into consideration it might not have FEL mode)? but if it does then how to enter this mode? and how to run this clone on another nanopi neo core?

I installed the kernels from and flashed them to sd card. Then i copied the modified .ko files from image that i built for latest non-rt kernel using the compile.sh. My orange pi zero is running rt version. When i try to modprobe the modified and copied module it gives me error: modprobe: ERROR: could not insert 'libcomposite': Exec format error I read that incorrect arch could cause this so i ran the file command. libcomposite.ko: ELF 32-bit LSB relocatable, ARM, EABI5 version 1 (SYSV), BuildID[sha1]=3a49e12c7809bbbdbdc3c5c5bd0fcd53e77dde44, not stripped i think module i built is not compatible with rt kernel i downloaded. I need to rebuild kernel…

My device is nanopi neo plus2 h5 soc with armban Buster server installed. I have realtek rtl8812au mt7612u two wireless network cards. I found that armbain's wifi driver is relatively old, how do I compile the latest driver https://github.com/aircrack-ng/rtl8812au https://github.com/openwrt/mt76 I tried to download the latest rtl8812au driver and compile it, but an error occurred device FriendlyARM nanopi neo plus2 0S armbian PRETTY_NAME="Armbian 20.08.3 Buster" allwinnertech h5 chip kernel Linux nanopi 5.8.10-sunxi64 CC [M] /root/rtl8812au/hal/phydm/halrf/rtl8814a/halrf_iqk_8814a.o CC [M] /root/rtl8812au/hal/phydm/rtl8814a/phy…

I want to completely disable display subsystem on Orange Pi Zero LTS (Debian 12 (Bookworm) minimal/IoT build 1 oct 2024). I blacklisted the GPU modules (lima, gpu_sched, drm_shmem_helper), but i can't find a way to disable sun4i-drm. Is there a way to disable it completely w/o recompiling the kernel?

Just "ln -sf interfaces.r1router interfaces" ? Should I install a dchp server?

Hello Dear all, I dont really understand why netplan is renderer: NetworkManager I try to put wpa_supplicant.conf but does not work. I have add my profile in /etc/NetworkManager/system-connections/ and test to connect with armbian-config it work. But, I don't know how to make my system automatically connect to wifi this way? Many thanks in advance for help.

I've tried many permutations of overlays and user-overlays and I can get /dev/spidev0.0 or /dev/spidev0.1 to be present, but I can't seem to get both simultaneously. I need both to migrate a project from an older Fedora distribution relying on modprobe to the latest version of Armbian. Any suggestions will be greatly appreciated! I started with very recent Armbian 23.02 Bullseye XFCE downloaded from arbian.com/banana-pi-plus .. Armbian_23.02.2_Bananapi_bullseye_current_5.15.93_xfce_desktop.img and I added the following to the /boot/armbianEnv.txt file, as described in the Armbian page associated with the BananaPi M1+ .. f…

Hi, I am trying to use below SSD1963 display modül with orange pi lite. is there anybody who can help me regarding wiring (SPI) and configuration https://www.buydisplay.com/default/7-tft-screen-touch-lcd-display-module-w-ssd1963-controller-board-mcu thanks, Mustafa

I'm working on a Duo project that needs SPI and this is how I configured and tested it without the mini shield. Requirements: NanoPi Duo with test Armbian image 1 female to female jumper wire Enable SPI on boot: sudo nano /boot/armbianEnv.txt Add spi-spidev to overlays= Add line param_spidev_spi_bus=1 sudo reboot If everything worked you should have /dev/spidev1.0. Check with ls /dev/spi*. Now we can test with a C program: cd wget http://www.raspibo.org/renzo/spidev_test.c gcc -o spidev_test spidev_test.c sudo ./spidev_test -D /dev/spidev1.0 spi device: /dev/spidev1.0 spi mode: 0 bits per word: 8 max speed: 500…

I've already tried adding the /etc/modprobe.d/usbhid.conf file to the options usbhid mousepoll = 4 but without success. I also tried to add in the / etc / modules file the lines -r usbhid usbhid mousepoll=4 I already looked at the usbhid blacklist and it is not in it could someone help me with this?

Display 4 * 20 i2s. It will be used to display information from mpd. How to do?

How to connect the mcp251x driver on the OrangePI PC? I make new kernel (Debian 8.7 (jessie)) with can-bus modules and mcp251x module. Has connected MCP2515 according to the following scheme. GND (PIN30 OPI) ---> GND MCP2515 VCC+5V (PIN2 OPI ---> VCC MCP2515 PC00 (PIN19 OPI) ---> SI MCP2515 PC01 (PIN21 OPI) ---> SO MCP2515 PC02 (PIN23 OPI) ---> SCK MCP2515 CE00 (PIN24 OPI) ---> CS MCP2515 PA20 (PIN37 OPI) ---> INT MCP2515 All modules are loaded, but the can0 device doesn't appear. modprobe can modprobe can-dev modprobe can-bcm modprobe can-gw modbrobe mcp251x

Hi all, I'm trying to understand how to make an infrared tx/rx module working. This is the module: https://www.aliexpress.com/item/5V-IR-Infrared-Remote-Decoder-Encoding-Transmitter-Receiver-Wireless-Module/32528109291.html Is there a way to make this works in userspace? Overlays? From the docs I was only able to understand how to enable existing overlays. I enabled cir, this is from my armbianEnv.txt: overlays=cir i2c0 but I don't know how to configure pins: which is rx which tx. Do I need to write down a new/custom overlay? I think that configuring pins is crucial to enable IR communication at some level but …

I'm using Orange Pi One with Armbiab 5.14. And trying to use GPIO (keys) for volume up and down, making game console. Of course, I could read GPIOs status by Wiring Pi, but I couldn't control volume by command. I tried amixer with various parameters, but not change HDMI volume. I'm not sure the usage detail of amixer on Armbian. Please advise me how to change volume by command. It's OK to control by C source, because use C program to read GPIOs!

Orange Pi Zero has two LEDs in the ethernet port and I want to control those leds for system notifications, right now I'm running OpenWrt on the OPiZ and I just need to know which file I have to trigger the LEDs. In GL.iNet router I can control the LEDs by doing echo default-on > /sys/devices/platform/leds-gpio/leds/gl-connect:green:lan/trigger But I don't know how to do that in OPiZ. Please tell me which file I have to edit in order to control the LEDs of the OPiZ

I have device named "atol hub-19" with A20, runs on old 3.4 kernel (fex based system configuration) ... there is a way to do convert .fex to dt ? I used Armbian_5.59_Lime2_Ubuntu_xenial_default_3.4.113_desktop.img and change script.bin... and the device works fine

I'm using Debian ARMBIAN 5:04 jessie 3.4.110 . I am running /usr/lib/nand-sata-install/nand-sata-install.sh script to copy the sdcard for Nand where the script performs the entire procedure to format nand , copy, etc. and at the end asks Off the device and remove the SDCard. However when starting Cubietruck without SDCard , it will not start ! As if I had not copied the sdcard contents to NAND. Interestingly More is not of any error in the procedure performed. Someone already has this problem ? Would you help me?

How can we create a custom image of Armbian Bionic/Buster for Orange Pi Zero with our customized application/code in it. Please suggest process for the same.

Hi all, I'm puzzled how everybody is building clusters of cheap SBC's, but nobody is implementing HA, redundancy, resiliency, failover, etc. They're just SBC's networked together. The SBC's are underprovisioned for Ceph, so I think that even if a Ceph configuration was managed to be shoehorned in, it wouldn't perform well. I don't know if DRDB is an option. How are people actually doing implementing real clustering technology on Orange Pi, for example? I'm using OPi+2E. Kind regards, Andrew

Hello, I own several Orange Pi 3 which I bought at different times. The last batch couldn't run the firmware I used previously: the ethernet was broken. So I suspect there is a new ethernet chipset on it. Current Armbian (Armbian_22.08.1_Orangepi3_jammy_current_5.15.63) works on both types. How could I differentiate the chipsets from the command line? Thank you

Board: OrangePi ZeroPlus2 H5 I need display some graphics using LCD, resolution is about 640x480 If armbian flashing with desktop, then the usable memory (512MB) is not enough for my app.... So, in console mode, does some libraries could help me to write pixel to display via HDMI? and it configurable(or test succeeded) in my board? Thanks!

I use Mainline 4.9.7 Ubuntu Xenial and wan`t to disable wlan and bluetooth, cause i don`t need. Where can i do this?

Hi guys, I tried to disable console output on uart0 using this guide https://docs.armbian.com/User-Guide_Fine-Tuning/#how-to-toggle-boot-output But I still get boot output on uart0. Problem is, that I'm using uart0 for a java application. Java application crashes a few seconds after starting. I got the hint, that I should disable console output on this port, to make it working. See here: http://pi4j.com/example/serial.html I think that's the problem, because if I unplug my serial device from uart0, java app doesn't crash. I'm using Banana Pi. Kernel is Verison 4.8.12. Armbian is Jessie 5.24 with desktop. How can I disable the output? Yours, Martin

Hello all. I am using bananapi M2+. I need UART0 for my development. But while booting, it transmits debug (u-boot) information. For example: U-Boot SPL 2016.09-armbian (Oct 24 2016 - 16:40:21) DRAM: 1024 MiB Trying to boot from MMC1 U-Boot 2016.09-armbian (Oct 24 2016 - 16:40:21 +0300) Allwinner Technology CPU: Allwinner H3 (SUN8I 1680) Model: Xunlong Orange Pi PC DRAM: 1 GiB MMC: SUNXI SD/MMC: 0, SUNXI SD/MMC: 1 *** Warning - bad CRC, using default environment How can I disable it?

Hi everyone, I am using nmtui to setup static ip both eth0 and wlan0 on orange pi zero. It works fine if only one of them was activated I want to use both. If LAN cable was be connected into pi, the board is run on ethernet. On other side, run on wifi when the cable was pluged out When I rebooted the pi without LAN cable, the eth0 auto activated lead to I can't access the module via wifi even though it is connected successful. I must connect via serial and disable eth0 after that I connected via wifi.

How to disable HDMI and CODEC in system where is ne kernel 6.18.25 cat /proc/asound/cards 0 [Codec ]: sun4i-codec - H616 Audio Codec h616-audio-codec 1 [HDMI ]: HDMI - HDMI HDMI 2 [Device ]: USB-Audio - USB PnP Sound Device C-Media Electronics Inc. USB PnP Sound Device at usb-5200400.usb-1, full speed I need an always USB sound card with the number of 0

Does anyone know if the Zero's on board WiFi chip XR819 can be disabled? The RJ45 is disabled by default, so there must be a way to disable the XR819 - right? Any thought appreciated.

Dear community, Im trying to get an USB gadget via OTG running on Linux (OrangePI Lite 2). As OPI Lite 2 doesn't support 'USB-UART/Gadget mode' like OPI Zero, I just modify the build config and rebuild kernel by myself as steps shown below. 1. I change the mode of USB from host to otg in the: https://github.com/armbian/build/blob/master/patch/kernel/sunxi-current/board-h6-orangepi-lite2-fix-missing-all.patch 2. I add MODULES_CURRENT="g_serial" & SERIALCON="ttyS0,ttyGS0" to build/config/boards/orangepilite2.conf file. 3. I rebuild the kernel and flashed the new image to sdcard. Unfortunately, I find it…

Hi, I need a help. I have waveshare 4inc lcd touch play display but I don’t know how to enable touch play. Please Help me.

i have a tablet on Allwinner A20, I burned Armbian_23.5.0-trunk.134_Lime2_bookworm_edge_6.2.12_xfce_desktop.img.xz into sdcard, it looks like everything is okay, but the tablet work only via HDMI, how to enable the tablet display ?