Allwinner sunxi

I'm pretty new to Linux, so it could just be me doing something wrong, but I downloaded Armbian_5.34.171121_Orangepiplus2e_Ubuntu_xenial_next_4.13.14_desktop.img, put it on an SD card, and load it in the orange pi. The legacy installs fine but not this version. Before I even make it to the login prompt I get these codec errors: sun4i-codec 1c22c00.codec: ASoC: /soc/codec/analog@01f015c0 not registered sun4i-codec 1c22c00.codec: Failed to register our card Then after filling out the login info, adding a new user, it goes to boot to the desktop, but nothing happens, just returns me to the command line. After some mucking aro…

Hello everyone, I have OrangePiPlus2E and I use Debian Jessie default 3.4.113-sun8i I was download and install Debian Stretch Next on second card and NFS don't work. I installed nfs-kernel-server and nfs-common. Next I copy exports file from older Debian and I can't connect to my Armbian via NFS protocol. Log file tell mi device trying connect, but I get answer from Armbian: can't get hostname. I don't know whad I did wrong. If I change CF card, NFS works fine on Debian Jessie. Could you help me? Regards

Hello Igor, I have a question, does the image has a built in NFS kernel module? I would like to use my CB2 board as an NFS server. Thanks PS.: on the site a small list about compiled kernel modules would be usefull

update works on 5.4.28-sunxi64, so for sure kernel issue... I fail to start the nfs-kernel-server on my neo2: ● nfs-server.service - NFS server and services Loaded: loaded (/lib/systemd/system/nfs-server.service; enabled; vendor preset: enabled) Active: failed (Result: exit-code) since Fri 2020-06-19 22:50:35 CEST; 57s ago Main PID: 28168 (code=exited, status=1/FAILURE) Jun 19 22:50:35 neo2 systemd[1]: Starting NFS server and services... Jun 19 22:50:35 neo2 rpc.nfsd[28168]: rpc.nfsd: writing fd to kernel failed: errno 111 (Connection refused) Jun 19 22:50:35 neo2 rpc.nfsd[28168]: rpc.nfsd: unable to set any sockets for nfsd Jun 19 22:50:35 neo…

Hi all. i say goodby rental server , hello orange pi . by the way i run nginx as basic authentification . /etc/nginx/nginx.conf is ------------------------------- events { worker_connections 800; } http { include mime.types; default_type application/octet-stream; index index.html index.htm; keepalive_timeout 65; server_tokens off; server { listen 80; server_name localhost; #<-for test root /var/www/d1; } server { listen 80; server_name n------------a.dip.jp; root /var/www/d0; } server { listen …

How often do nightly builds get added. I had a kernel support committed for meshpoint to the Orange Pi H5 repo but there is still no new download and its been over a month.

I installed pihole and unbound with Armbian's ready-made config installation, but I can't access the interface of the pihole.

I have a windows 7 laptop and the A20 cubietruck board with Mainline 4.9.7 Debian Jessie and I need to achieve an ssh connection between them via a wireless router.On cubietruck I have installed opnssh-client and openssh-server and have checked that it listens to port 22. On windows I try with putty to connect to board via ssh. The connection is done , I give username and password but then it freezes and I cannot access any of the folders of the debian. I also tried the mobaxterm but the same result. Does anyone has an idea of what I have done wrong?

Hi im using Orange Pi Zero +2 H3 with the current armbian image. 4.19 y i think... basically Im using HDMI out but i want to use the analog audio pins on my project. However the pins seem to be disabled and there doesnt appear any way to enable them. alsamixer only shows the allwinner,HDMI but no controls... Pulse audio panel seems less than helpfulp, lists Analogoutput but doesnt actually send any sound out through the pins. I warn you im not a linux power user. I can just about get around terminal but I dont know where files are off by heart or know exactly what and where to edit. So maybe a little hand holding :) Reading …

Hi, I've decided to make a fresh install on a bigger SD card using Armbian 22.05 Bullseye on my Opi PC+. The aplay command doesn't output any sound, and alsamixer show the card is H3 codec. I don't know if the sound is output to the HDMI port or any other problem. Anyone could help ? Than you

Hello! I have installed image Armbian_24.2.1_Orangepizero_jammy_current_6.6.20_minimal.img from https://www.armbian.com/orange-pi-zero/ Orange Pi Zero H2+ 256M There are only utils root@mobi:~# armbian armbian-add-overlay armbian-install armbianmonitor https://paste.armbian.com/ayoxebogog

Hello, i can't hear any audio out of my cubietruck. This is my system: root@cubietruck:~# uname -a Linux cubietruck 3.4.109-sun7i #4 SMP PREEMPT Sun Oct 11 14:32:15 CEST 2015 armv 7l GNU/Linux root@cubietruck:~# lsb_release -a No LSB modules are available. Distributor ID: Debian Description: Debian GNU/Linux 8.3 (jessie) Release: 8.3 Codename: jessie root@cubietruck:~# cat /proc/asound/cards 0 [sunxicodec ]: sunxi-CODEC - sunxi-CODEC sunxi-CODEC Audio Codec 1 [sunxisndspdif ]: sunxi-sndspdif - sunxi-sndspdif sunxi-sndspdif 2 [sunxisndi2s ]: sunxi-sndi2s - sunxi-sndi2s sunxi-sndi2s …

Hello I´m having problems to manage the audio in my a20 board. I´m using ARMBIAN 5.26 stable Debian GNU/Linux 8 (jessie) 3.4.113-sun7i [audio_para] audio_used = 1 capture_used = 1 playback_used = 1 audio_lr_change = 0 alr@lime2-emmc:~$ aplay -l **** List of PLAYBACK Hardware Devices **** card 0: sunxicodec [sunxi-CODEC], device 0: M1 PCM [sunxi PCM] Subdevices: 1/1 Subdevice #0: subdevice #0 alr@lime2-emmc:~$ alr@lime2-emmc:~$ groups alr alr : alr dialout sudo audio video plugdev netdev bluetooth alr@lime2-emmc:~$ alr@lime2-emmc:~$ aplay -L null Discard all samples (playback) or generate zero samples (capture) default:CARD=sunxicodec sunxi-CO…

I installed Armbian 4.5 Debian Jessie 3.4.109 and added XFCE desktop, but there is no audio on 3.5 jack (I cannot test HDMI audio output). I built my own Debian Jessie 3.4.109 selecting Banana Pro and including XFCE desktop without any other change, and also in this case there is no audio on 3.5 jack. Some useful information to solve the problem. These are equals on both installation. root@bananapipro:~# cat /proc/asound/cards 0 [sunxicodec ]: sunxi-CODEC - sunxi-CODEC sunxi-CODEC Audio Codec root@bananapipro:~# cat /proc/asound/devices 2: [ 0- 0]: digital audio playback 3: [ 0- 0]: digital audio capture 4: [ 0] : control 33: …

Hi I have nano pi m1 with armbian installed. When I play video on firefox, it shows but the sound is too choppy like sea waves and I don't hear the real sound. what should I do to fix it?

sunxi-tools's seem to be missing from the image or have I messed the paths somehow ? (Armbian_5.24_Orangepipcplus_Ubuntu_xenial_dev_4.9.4.img) got it from here https://github.com/linux-sunxi/sunxi-tools but if this is not a mistake I have to add it to my automated installation process

Hi, I updated my system to version 5.20. This version is supposed to solve the problem of bluetooth.But this is not the case. Can you help me? thanks. ps : dmesg | grep ap6210 : 8.054958] [ap6210] select wifi ap6210 [ 8.058372] [ap6210] Initializing ap6210. [ 8.063627] [ap6210] platform device registered successfully. [ 8.067651] [ap6210] Using ap6210 configuration. [ 8.288340] [ap6210] WLAN placed in POWER ON [ 8.559560] [ap6210] Linux Kernel SDIO/MMC Driver [ 8.582485] [ap6210] Broadcom Dongle Host Driver: register interface [wlan0] MAC: 00:90:4c:11:22:33 [ 8.947049] [ap6210] WLAN placed in RESET [ 10.468573] ap6211: exports du…

Hi, I'm trying to use bluetooth with the Mainline 4.11.9-sun8i armbian kernel (I also tried 4.11.7-sun8i). I activated ttyS3 (uart3) in armbianEnv.txt: verbosity=1 logo=disabled console=serial overlay_prefix=sun8i-h3 rootdev=UUID=59c35982-ddad-4bf0-8b72-a8974bfe88a6 rootfstype=ext4 overlays=uart3 spi-spidev param_uart3_rtscts=1 param_spidev_spi_bus=0 Unfortunately hciconfig -a does not find any device. I already tried to set the baudrate but no chance to get bluetooth alive: service bluetooth stop rfkill unblock all echo "0" > /sys/class/rfkill/rfkill0/state echo "1" > /sys/class/rfkill/rfkill0/state echo …

comes to adding 131068 swap on /var/swap and further loading is not How to fix it? tried a USB flash drive to the new record, it is still the same, a reboot is not helping

Hy everyone, I am trying to get armbian running on my bananapi. The problem is if i write the raw file to the sdcard (following the instructions) no boot partition is created. The bananapi does panic while booting and restarts after a few seconds... Any ideas? Thanks!

Hi i have orange pi lite board, i run :ARMBIAN 5.31 stable Ubuntu 16.04.3 LTS 3.4.113-sun8i on this boards and works fine, but when I turn on the card there is no text in the hdmi output until it finishes loading the operating system, how i can configure the armbian to see the boot text?? i can see the boot text by USART port, but i want to configure by HDMI monitor. Best Regards Nelson

I am trying to connect an SATA -> USB DVD-R drive to OPi3, but it fails, K3b complains about "no drive". Here is syslog: Aug 15 22:12:31 orangepi3 kernel: [34203.588120] usb 3-1.1: new high-speed USB device number 8 using xhci-hcd Aug 15 22:12:31 orangepi3 kernel: [34203.712687] usb 3-1.1: New USB device found, idVendor=13fd, idProduct=084 0, bcdDevice= 1.14 Aug 15 22:12:31 orangepi3 kernel: [34203.712695] usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNu mber=3 Aug 15 22:12:31 orangepi3 kernel: [34203.712698] usb 3-1.1: Product: External Aug 15 22:12:31 orangepi3 kernel: [34203.712701] usb 3-1.1: Manufacturer: Generic Aug 15 22:12:31 orange…

Hi, I just started to fiddle around with my Cubietruck (since I exchanged it with a Banana Pi for productive stuff). I had to realize that /sys/devices/system/cpu/cpu0/cpufreq/ is missing and that cpufreq-info outputs "no or unknown cpufreq driver is active on this CPU" correctly. Anyone else seeing this behaviour? Cpufreq support should be back with 4.0? Based on a sysbench run ("sysbench --test=cpu --cpu-max-prime=5000 run --num-threads=2" -- takes 58 seconds) I would suppose it's running not even at 960 MHz (since 960 should finish in less than 54 seconds). I did some iperf tests (not that promising, just 600/650 Mbits/sec) and iozone with my usual test…

.. available in 3.9_wheezy_4.0.5? D.

Hi everyone, I am having issues with video output on my A20-micro when using legacy kernel. I get the proper output from uboot, but when it starts to load the kernel, I get some garbage on the screen, then nothing. I had a look through the forums to no avail. My boot logs are uploaded to http://sprunge.us/dGhS From what I see, the default kernel command line seems to be correct for my purpose. The system is up and running as I can login through serial and SSH. I tried setting the resolution with a10disp but I got the following response: "Cannot change HDMI mode because HDMI is not enabled." Anyone has a clue on what I am missing ? Than…

Hi Igor, I grabbed your 4.1 image, flashed it onto the microsd Card and boot the cubietruck. However, I received the message from my display: Out of specification: 67.5kHz / 60 Hz. The first boot is ok, but after starting the kernel the screen turns black and above mentioned message apears. This happens on the analouge (VGA) input and on the digital input (DVI) as well. How to fix the problem?? I never had any display problems with all your images. never! This is the first time. I might to use your 4.0 image to return into operation again. regards, hitam4450

Hi everyone, I want to have a diskless Orange Pi Win, i'm trying to get the Ethernet to work in u-boot, but it does not seem to connect at all with my router when booting, no blinking led at all (none on the Pi neither on the router), I tried différents cables, ports, searched on the web, found some "patches" on DTS file on the web for pine64... But nothing seems to work (but Ethernet works correctly when the Pi is booted on Linux). Any Idea ? Many thanks,

My Armbian paste is at https://paste.armbian.com/yamakinoce This is an OrangePi Zero Plus, with an H3, not an H5 or an H2. I see all kinds of problems here but don't know how to fix them. It seems the DTB is just wrong for this board. For one, there are interrupts showing up in /proc/interrupts for HDMI and LCD, but this physical board has *neither* of those. It has an Ethernet PHY but neither the kernel nor uboot see it. It also has a Wifi but the kernel does not see that either. Does a correct DTB exist for this board? What is its name? I vaguely remember a couple ways to force the kernel and uboot to use a different DTB …

Hello. I install the 5.35 Version on a OrangePiPc+, all run in good condition. I upgrade to the 5.38 without problem (kernel 3.x) I upgrade the kernel to 4.x, so long as i didn't reboot, all is in function (with Ubuntu) and my USB Tevii 662 is recognized (and run with TVHeadend). After reboot, no Ethernet and no USB, no possibility to login. I tried all versions with kernel 4.x, even desktop, no function. Anyone has a idea, how it will be run??? Thank's for any idea. P.S. OrangePI PC Plus, 1 GB RAM, 8 GB SSD-OnChip, Tevii S662 S2 USB, TVHeadend.

Dear Igor, I made a custom 4.1 kernel with your script, where a staging driver (mn88472) is included. I'am trying to use an Astrometa DVB stick with mn88472 demodulator, but it's not working. Everything seems fine, no errors, every module loaded, firmware is in it's place. If I run wscan, it goes through every frequency, but it doesn't find any channel. The most weird thing is that two or three times it worked, but I don't know why, and I am not able to reproduce it. (I am using DVB-C so it's sure that the signal is fine) I investigated the source code of the mn88472 module, and as I see, I should get a notice about the firmware load status. An error message o…

Hi, I try to run Armbian 4.5 (Bananapi Ubuntu trusty 3.4.109 desktop) on my Banana Pi M1+, but after the "Starting kernel..." prompt the monitor show only the "No signal" warning. (I connect the Banana Pi to my monitor with HDMI - DVI converter, I will be able to try it with single HDMI cable a few days later.) However, it boots. I have a lot of tries to change the boot.cmd and the banana.bin, but I didn't achieve satisfying result. The result of dmesg: [ 0.000000] Booting Linux on physical CPU 0 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.4.110-sun7i (root@production) (gcc v…

Hello, One of my BananaPI is used to display a graphical dashboard. But after a system upgrade (apt update / apt upgrade), the HDMI output seems disabled after reboot : - the boot process is displayed, but it seems it's disabled as soon as the DRM driver is loaded. Any tips, help ? Thanks # uname -a Linux TdB 6.12.30-current-sunxi #1 SMP Thu May 22 12:29:54 UTC 2025 armv7l GNU/Linux # cat /etc/armbian-release # PLEASE DO NOT EDIT THIS FILE BOARD=bananapi BOARD_NAME="Banana Pi" BOARDFAMILY=sun7i BUILD_REPOSITORY_URL=https://github.com/armbian/build BUILD_REPOSITORY_COMMIT=1a8daf0 VERSION=23.…

Hello, I'm trying to get a opi+2e to output something on my HDMI TV without success. The TV is a 10yo Thomson intuiva 27LB130S5 (1280x720, should be capable of 720p / 1080i) I tried android on eMMC, worked OK. Installed Armbian_5.14_Orangepiplus2e_Debian_jessie_3.4.112_desktop on a microsd. During install there was some console output to the display (a bit mangled), and after the reboot, nothing. I got SSH over eth access. I disabled nodm service, rebooted to have FB console only (easier to debug, or so I thought) Still nothing. Tried h3disp on a few resolutions (-m 6, 5, 4, 2) with a reboot between each one. None gave me anything …

hi i have problem with orangepi plus2e i have not image on hdmi i atach some logs from Tera Term (serial terminal) witout sd HELLO! BOOT0 is starting! boot0 version : 4.2.0 boot0 commit : c8c201b51b7ea1baa94590a1887313124d9a5879 fel_flag = 0x00000000 rtc[0] value = 0x00000000 rtc[1] value = 0x00000000 rtc[2] value = 0x00000000 rtc[3] value = 0x00000000 rtc[4] value = 0x00000000 rtc[5] value = 0x00000000 rtc[6] value = 0x00000000 rtc[7] value = 0x00000000 DRAM DRIVE INFO: V1.4 the chip id is 0x00000081 the chip id is 0x00000081 the chip id is 0x00000081 the chip id is 0x00000081 the chip id is 0x00000081 NOT…

Greetings, I'm using latest Jammy on an OPIZ2. I've installed the Mate desktop and enabled the desktop with armbian-config. I get no HDMI output. Am I missing a step? Is the Mate desktop appropriate? Thanks. The system works with the vendor's debian distro, but I'd like something better.

i just upgrade from jessie to armbian stretch (5.65) i check aplay -l, why only shows audio codec? anybody help? root@bananapim2plus:~# aplay -l **** List of PLAYBACK Hardware Devices **** card 0: Codec [H3 Audio Codec], device 0: CDC PCM Codec-0 [] Subdevices: 1/1 Subdevice #0: subdevice #0

Hello all. Try as I might, I can't get HDMI sound on my OpiPC. orangepi@orangepipc:~$ aplay -l **** List of PLAYBACK Hardware Devices **** card 0: audiocodec [audiocodec], device 0: SUNXI-CODEC sndcodec-0 [] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: sndhdmi [sndhdmi], device 0: SUNXI-HDMIAUDIO sndhdmi-0 [] Subdevices: 1/1 Subdevice #0: subdevice #0 I originally had no asound.conf, but I made one: pcm.!default { type hw card 1 } ctl.!default { type hw card 1 } Looking around, I see an unanswered question on this from '16. HDMI on the TV does work with a…

Hi Guys, After a long time after the release Linux kernel 4.x I want use the I2S on Lime2 (Armbian Stretch kernel 4.14.14), but I2S interface did not work. I was add activation of overlays i2s0 and i2s1 into/boot/armbianEnv.txt root@lime2:~# cat /boot/armbianEnv.txt verbosity=1 logo=disabled console=both disp_mode=1920x1080p60 overlay_prefix=sun7i-a20 rootdev=UUID=dcf7af80-8026-4e99-870f-f0d35f926063 rootfstype=ext4 overlays=i2s0 i2s1 usbstoragequirks=0x2537:0x1066:u,0x2537:0x1068:u After reboot I can't see I2S interfaces... root@lime2:~# aplay -l aplay: device_list:270: no soundcards found... root@lime2:~# lsmod | grep snd snd_soc_core 118…

Hello, I am not able to get the keyboard working. I have tried the downloads and compiling my own images. Bulleye is the only thing I can get to compile. There are error massages if I try to compile anything other than Bulleye.

I am not sure if this is intended or bug, When building the image for Nanopi duo2 I cannot add kvm. This worked before so I guess that this is regression. I get this search result for kvm in the build process: ┌──────────────────────────────────────────────────────────────────────────────────────────────────────────────────────── Search Results ────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┐ │ Symbol: KVM [=KVM] …

Hello, I noticed that Orange Pi 2 mini has disappeared from supported boards. Is it possible to use image for Orange Pi 2, although the "mini" does not have onboard wifi?

Hello, I just installed the incredible Armbian on my OrangePiPlus. I can't find the EMMC Boot script nan-sata-install. Has something changed in the past I didn't noticed? with regards

Hello everybody! I upgraded my armbian on my Bananapi M1 to... armbian 20.08.17 Buster with Linux 5.8.16-sunxi Unfortunately I don't have any internet access anymore now. I can still SSH into the board, but I can not ping any server with it. What more information do you need to help? Thank you very much for your attention!

Updated my bananapi pro to from 5.30 minutes ago...but now it doesnt boot ;-( Any possibility to get my system back without setting up completely new? Never had this with all update before.....

I know it's not an officially supported board, but it's been working really well so far, so I'll give it a shot. Today I updated my kernel to 5.9.0-sunxi (coming from 5.9.0-rc7-sunxi) and after rebooting the (wired) network was dead. Everything looked fine, ethernet driver is loaded, interfaces were up and had IP addresses, but packets were not being sent. Pinging anything but the Banana Pi itself says "destination host unreachable". Routes were set and looked correct - even tho they should not even be necessary as I was pinging the gateway. tcpdump on eth0 showed nothing at all, almost as if the kernel doesn't know where to send the packets. Anyon…

See build log https://paste.armbian.de/lesoquheja The kernel works, but installing the .deb failed because my extlinux script could not copy: /usr/lib/linux-image-6.18.1-edge-sunxi/overlay/sun8i-h3-analog-codec.dtbo The whole overlay folder does not exist. It does exist for 6.12.58-current-sunxi and last time I compiled kernel for the nanopineo was 6.16.8, the overlays were created. I remember it was also once the case with edge kernel for other SBC ( .deb package from the Armbian beta repo). That time own local build did create overlays. I am not sure where to look or what could be wrong.

Hi! Is it only me or there are no updates to packages? Let me explain, I'm running jessie server on A20 latest stable kernel and when I run apt-get update, apt-get upgrade there are never updates available. I have experienced this for some of the latest releases and now I'm starting to thing that something is wrong with my system. Especially because I have a raspberry pi and that (yes, I know is raspbian) is getting updates to packages from time to time. I haven't modified or customized anything in the sources list. And the thing is that I'm getting updates for firmware/kernel when they are available. Any ideas? Is it something normal for armbian (/debian)?

I have tried to setup user quotas on my Orange PI PC2 and realized that there is no quota module in kernel at all. Switching between all kernel versions with armbian-config utility and all the same - they don't have quota module. Why there is no such necessary module? Is it possible to install this module and how? P.S. Sorry, maybe i have selected wrong chapter for my question

Hi, I'm fairly new to SBCs and Linux and try to get RS485 working on a NanoPi NEO running Armbian (Legacy 3.4.113). I build a custom shield for the NanoPi Neo with a MAX3485 taht is connected to the UART2 (TX,RX,RTS) but so far only transmission works. This is because the RTS pin which I planned to use for toggling the direction pins is always high. I tried to use ioctrl to have it been toggled automatically, but had no success so far. I'm tried to figure out whats the problem and I believe that the configuration of the UART2 does not include the RTS signal: cat /proc/tty/driver/uart |head -8 serinfo:1.0 driver revision: 0: uart:SUNXI mmio:0x01C28000 irq:…

Hello, I'm a complete beginner with Armbian and SOC board. I've a bananapi pro board from lemaker and I've installed 6 month ago Raspbian / Jessie and domoticz and all works well until a click unfortunately on update icons of domoticz...and the problems began...no back up...new version of domoticz required buster...image buster not avalaible under raspbian for bananapro.... So I decided to install Armbian/buster_minimal I've serial link on which I can see that board boot correctly. I've installed Armbian-config and the "Default install desktop with browser and extra". I want the board to show information on HDMI…

Hi I only have an old monitor, and I thus need to use a HDMI-to-VGA-converter to work with my Orange Pi PC Plus. When powering the Orange Pi on, the green LED on the board is constantly ligthened. On the monitor, I get a black screen, after 4 s (or so) a totally red screen. No text. No graphics. Then after about 15 s, on the board the red LED starts to double blink. The red screen remains for ever. I have tested the Raspbian and Debian images available on http://www.orangepi.org/downloadresources/. They work fine with the converter. Alas, the preferred OS, "Orange OS" armbian, seems not to work. Board: Orange Pi …

hi all, I tried in various forums, but without an effective solution. I use cubieboard3 with cubietruck Linux cubietruck 3.4.104-sunxi #1 SMP PREEMPT Fri Oct 17 16:13:30 CEST 2014 armv7l GNU/Linux Debian GNU/Linux 7 \n \l When i run poweroff or shutdown -H or other option the system reboots instead of shutting down. ls -la /sbin/poweroff lrwxrwxrwx 1 root root 4 jul 18 2013 /sbin/poweroff -> halt if unplug li-battery shutdown work fine. Does anyone have any suggestions? regards

Hi, I've tried to use the Ubuntu Xenial Mainline 4.9.4 server on my orange pi one. The u-boot log messages appear on the HDMI monitor but after the "Starting Kernel" message, the monitor shows "No Signal". I can still acess it through SSH. Executing dmesg, there is a log "simple-framebuffer: probe of 59f42000.framebuffer failed with error -12". I'm new to Linux, Is there a way I can fix it ? Thx.

Hi guys, I am very sorry to bother you, I tried everything I could to make this work but unfortunately, I can't figure it out. So here I am asking for help ! I am using the Armbian 4.5 Jessie (Kernel 3.4.109) on an Olimex Lime A10 board, everything works fine (Wifi & Bluetooth via USB dongles), but there's no sound. I tried aplay -l but nothing is found. modprobe sun4i_codec returns "codec not found". Could you help me find what's wrong ? I would like to avoid compiling a kernel by myself if it's possible ... Thanks !

Hello, I have just built an image with the default parameters of the Lime A20 board. It seems that the system does not detect any sound card. aplay -l aplay: device_list:268: no soundcards found... uname -a Linux lime 4.13.6-sunxi lsmod Module Size Used by cfg80211 376832 0 rfkill 20480 1 cfg80211 sun4i_gpadc_iio 16384 0 evdev 20480 1 at24 16384 0 sun4i_ts 16384 0 sun4i_gpadc 16384 0 nvmem_sunxi_sid 16384 0 sun4i_ss 24576 0 uio_pdrv_genirq 16384 0 uio 16384 1 uio_pdrv_genirq As you can see above, there is no module related to sound. …

No sound card on 5.0 trusty vanilla, but it works on jessie. trusty: aplay -l aplay: device_list:268: no soundcards found... on jessie: aplay -l **** List of PLAYBACK Hardware Devices **** card 0: sun4icodec [sun4i-codec], device 0: CDC PCM Codec-0 [] Subdevices: 1/1 Subdevice #0: subdevice #0 Both are armbian 5.0 with kernel 4.4.1, on Cubieboard2 Also warning on installing cryptsetup on trusty: update-initramfs: Generating /boot/initrd.img-4.4.1-sunxi cryptsetup: WARNING: failed to detect canonical device of /dev/mmcblk0p1 cryptsetup: WARNING: could not determine root device from /etc/fstab This error doesn't appear on jessie. Also, on trusty the ha…

Hello I am using Orange Pi Zero 3 and I installed the latest armbian version on it I have the picture through HDMI, but there is no sound!!! Isn't one of the main uses of these boards multimedia?! Why shouldn't this board have sound?!!! I have checked all the settings. Thank you. If there is a way, please help me My armbian version: Armbian_community_24.5.0-trunk.667_Orangepizero3_jammy_current_6.6.31_gnome_desktop

Hi, I've recently acquired some nanoPi M1, and just about now installed ARMBIAN. However I can't seem to get any sound working via 3.5 analog jack. Volume is set right on alsamixer Speaker are working and volume is set at max Soundcard is listed but yet I have absolutely no sound ... any ideas ? root@user:~# aplay -l **** List of PLAYBACK Hardware Devices **** card 0: audiocodec [audiocodec], device 0: SUNXI-CODEC sndcodec-0 [] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: sndhdmi [sndhdmi], device 0: SUNXI-HDMIAUDIO sndhdmi-0 [] Subdevices: 1/1 Subdevice #0: subdevice #0 root@user:~# cat /proc/asound/cards 0 [audiocodec ]: audiocodec -…

hi all . i nstall both minidlna and vlc . i hear sound youtube from HDMI (iceweasel). but by vlc on armbian i can not hear normal sound from HDMI , only rarely get noise from HDMI . (i try aidio -> audio device , but no effect) what should i do ?

hi all . i nstall both minidlna and vlc . i hear sound youtube from HDMI (iceweasel). but by vlc on armbian i can not hear normal sound from HDMI , only rarely get noise from HDMI . (i try audio -> audio device , but no effect) what should i do ?

Hello, I am facing an issue regarding audio playback using the vanilla kernel( v4.5.2 ) for Banana Pi. There is no sound via the analog audio jack. aplay -l does show my playback device though. Here are some screenshots of my current config: speaker-test is throwing error: Should I need to configure anything else?

No sound via the hdmi port to hdmi tv port however I can use headphones with the 3.5 mm audio jack and it works fine. Not sure if my board is broken either. I just got it. The only image that works with my orange pi pc plus is Armbian Stretch edition. The ones I have tried thus far are armbian xenial multimedia edition, retrorangepi, android 7 from orangepi website they all don't work haven't tried bionic armbian edition though. But that is for another post just thought to mention that. 1. Logs when you can boot the board: armbianmonitor -u https://pastebin.com/e5xb2gZD

Hi, I've tested Armbian this week-end to replace my Cubian distro, and I failed to get the sound out of my speaker. I went back to Cubian X as sound works with stock image. Anyone could help me with it please ?

Good morning all I have an OPi Zero H2 with the official expansion card. My goal is to make an Airport module to connect a speaker to it. The installation of Shairport in APT all is ok I can see the sharing on my iPhone. But the problem is that I have no sound when I plug a speaker into the 3.5mm jack port on the expansion card. I have correctly installed the "analog-codecs" and made a reboot. In Alsamixer I put "Line-Out" and "DAC" to the maximum (red). But still no sound ... When in doubt, I did all these operations on Armbian Focal / Buster / Bionic but it didn't change anything. Can you help me please? believe me I have tried everything for 4 da…

I have installed ~$ uname -a Linux orangepioneplus 5.4.18-sunxi64 #trunk.038 aplay -l **** List of PLAYBACK Hardware Devices **** card 0: allwinnerhdmi [allwinner-hdmi], device 0: 5091000.i2s-i2s-hifi i2s-hifi-0 [5091000.i2s-i2s-hifi i2s-hifi-0] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: Device [USB PnP Sound Device], device 0: USB Audio [USB Audio] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1 works good alsamixer When choosing allwinner-hdmi

Dear Armbian community, Thanks for your gret effort. I'm struggling to make my 3.5 jack audio output delivering some other sound than just constant hissing noise. DMESG, aplay and alsa says: [ 1.137451] asoc: sndcodec <-> sunxi-codec mapping ok [ 1.138617] [DAUDIO]sunxi-daudio cannot find any using configuration for controllers, return directly! [ 1.138816] [I2S]snddaudio cannot find any using configuration for controllers, return directly! [ 1.138831] [DAUDIO0] driver not init,just return. [ 1.142966] asoc: sndhdmi <-> sunxi-hdmiaudio.0 mapping ok pczekalski@orangepiplus2e:~$ aplay -l **** List of PLAYBACK Hardware D…

Hi, I've just downloaded the July 12th image with the 3.4.108 kernel from http://www.igorpecovnik.com/2013/12/24/cubietruck-debian-wheezy-sd-card-image/. After booting from SD card i can't seem to reach ssh on this machine. I can ping it though ping times vary between 1 and 220ms. I tried to boot several times but nothing changes. With the 4.x kernel i was able to boot and ssh into. Any idea?

Hi there, my favourite Video player is VLC (who remembers? ;p), so I downloaded it, apt-get install vlc But on MP4 video image is 8x squashed, speed looks OK, sound is "almost working" with muting from time to time. With mvp screen looks (geometrically) ok, but pixels are 8x8 (colour). Unusable too. Any ideas? Sample film visualises on mCeleron 1.4GHz / Intel GMA w/o problem. (I know, from HDD, but it looks not like a HDD performance problem).

Hello everyone, I was running Armbian Xenial (mainline 4.11.8 kernel) on Win Plus and it was working pretty good (after a little fix). But after some bad configurations (the system was still working..), I decided to re-install the whole system. The thing is that there are no more mainline builds for this board on the download page and 3.10 kernel is too old (I need at least 4.9)... So I decided to build the system but I have some issues that makes the board pretty useless. The first is that there is no more Ethernet, no blinking light on the board neither on the switch... The second are the USB port : The two USB ports on the right of th…

Enable in armbian-config USB and this no detect USB OTG and additional USB host on the board no working any usb device (microphone, usb storage, keyboard, etc.) that connects detects it Any help you can give me

Hello, First of all, I did check/tried anything i could find on similar issues, for similar SBCs Main issue: only 2/4 USB ports are powered, but they don't recognize any device (keyboard, mouse, memory stick), although, if i plug in an USB hub, it lights up. I also tried an Android and and an Ubuntu LXDE, same problem. What bothers me is that mouse and keyboard worked with the original Android that came pre-installed on the board. Config: - Orange Pi plus 2E (the one with 4 USB ports) + heat sink + HDMI to VGA converter Power source: I tried 4 so far, currently using a PSU of 5.15 V and 4 Amps, through the DC input, jack ba…

wget https://cdn.kernel.org/pub/linux/kernel/v4.x/linux-4.6.6.tar.xz tar -xpJf linux-4.6.6.tar.xz ln -s linux-4.6.6 linux make oldconfig make menuconfig make-kpkg clean CONCURENCY_LEVEL=3 fakeroot make-kpkg --initrd --revision=14082016.01 kernel_image kernel_headers But USB do not work! I do not found CONFIG_AXP20X_POWER in new config. After manual add its gone! How to solve this ?????

Hi all Does anyone recall if with kernel 4.9 it is required to put some patch for enabling power on the USB Host port of BananaPi? I am using vanilla kernel in another project, (LEDE) and when switching to kernel 4.9 I don't have any power from the USB port The dts is the vanilla one and AXP20x power driver is enabled Thanks!

Hello! I wrote the legacy image to a sd card and put it into the card slot. I can see something like diagnostic message and then "starting kernel". After that there is no video output. Neither over VGA nor over HDMI. Is that wanted? I tried 3 different monitors, but no chance. I can connect via ssh after a few minutes, but using a monitor and a screen would help, when there is no network. What am I doing wrong? Greetings, Pille

Hi there, I'm using a Cubietruck with Ubuntu-Server 16.04.3 legacy. To make ssh-login more secure I changed to public-key and disabled login with user/password. Everything works fine, but at login I can't see the welcome screen any longer. Not a big problem, but it would be nice to get help. Thx!

Hi Guys, today I've Updated from "Armbian_5.67_Nanopiduo_Debian_stretch_next_4.14.90" to Armbian_5.69_Nanopiduo_Debian_stretch_next_4.19.13" now I've the follwing problem on my nanopi duo. It has Wifi onboard (XR819), but after an Update to Kernel 4.19.13-sunxi. my wifi device was lost. Before the Update the wifi device was listet as wlan0. to avoid configuration errors i also reinstalled the system. It does not work with debian or ubuntu. If i roleback to an older kernel everything works great. uname -a Linux nanopiduo 4.19.13-sunxi #5.69 SMP Wed Jan 9 16:26:48 CET 2019 armv7l armv7l armv7l GNU/Linux ifconfig -a …

Hello -- bringing in conversation from https://github.com/armbian/build/pull/5726#issuecomment-1817668480 as requested. @viraniac -- I've attached the dmesg output from a fresh flash of the quadra SD image -- which is just armbian checked out at `90c05ba` with this patch applied: https://www.inovato.net/build/quadra.patch . Build instructions from the founder are at https://forum.inovato.com/post/building-armbian-from-source-12449428?pid=1333459893 Curiously the dmesg output almost looks truncated to me -- doesn't start with `Booting Linux on physical`, and I see a few xradio message but no results for 819. I've rebooted and get similar output wit…

I updated my system to the newest kernel and lost all WiFi. What is the deal???

I've tried to the best of my abilities, but it seems that the current Bionic image does not support the K1 Plus wifi? Is that correct? In armbian-config there is no option to setup wireless and I cannot get the board to recognise a wlan0 device by changing the interfaces configurtation.. Is there some trick?

Hi there, I have configured (successfully with NetworkManager GUI, or TUI, it was quite ago, can see it in /etc/NetworkManager/system-connections/ ) my OPi3 as an WiFi AP. (Needed this as sharing "normal" LAN traffic with video surveillance on same WiFi channel was a disaster). It works, but in "scan" on OpenWRT routers this WIFi shows only as WPA not WPA2 protected. Armbian Buster 21.02.3. Why? How to correct this? Laurent

Hi! I need some help in order to install Node-RED over Armbian Wheezy on Cubieboard1 can anyone give me help?

Hello. from Bulgaria. I want to ask you, do you know if there is newer version of nodejs tnah 0.10.29, because this version don't have child_process.spawn that can directly pipe both input and output from some process. Thank you in advance!

Hello, I am using the Olimex OLinuxino and I find a constant noise at about 866.725MHz or thereabout in every board. While low, at -100dBm, when using it with IoT radios this is the band in India and it is quite a pain in applications requiring high sensitivity. This particular board had it pretty nasty at -86dB. I have tried with changing the DDR frequency as well as the CPU clock, however this nuisance refuses to go away. What can be done to get rid of this noise ? I have tried multiple boards -- Olinuxino (multiple), Marsboard, but each has some noise in exactly same band near 866MHz. Please advise.

First Boot is Ok and then at second Booting of the above image, I receive the usual Out of Sync messaage (67.5kHz / 60 Hz) message and no display! regards, hitam4450

Hello, I have what I hope is a simple question, but I haven't been able to find an answer. - Orange Pi Plus2e - Debian Jessie Linux is only booting to a console prompt. I can log in, browse around which is great but I would like to explore the GUI. As I understand there are some screen resolution issues, however I do see the Arbian spash screen which looks like rendered video. Also, I'm seeing that H2/H3 Allwinner part design is missing a lot of multimedia/video support eg. Mali drivers. I liked the fact the Orange pi had 2G memory and embedded flash, but OS support is lacking (not complaining, just observation). Are broadcom…

I have a BPI-M2 and I am trying to patch kernel 4.4.1 with contents of archive patches-4.4.1-rt6.tar.gz for RT-Preempt while making Debian Wheezy xfce desktop image. I have tried putting patches in /userpatches/kernel/sunxi-dev and /userpatches/kernel/sunxi-dev/linux-vanilla/v4.4.1 nether worked. Made image but patches were not applied Any help would be appreciated Tim

Hi, I have a OrangePi+ 2E running ARMBIAN 5.33 user-built Debian GNU/Linux 8 (jessie) 4.13.5-sunxi The system is installed and runs well from EMMC, but now that I have it set up more or less as I want it, I tried to boot from sdcard to do a emmc backup as here I tried first plugging the original SD that was nand-installed to emmc, but the system would only boot to emmc, su did a fresh install of armbian next to a new sd card, but the system will still only boot from emmc. Any ideas? BR.

Dear all, I am not able to find and enable SPI in orange pi zero+ (allwinner H5).I did as per many suggestion on many forum but didn't work and not showing active. Please give me concrete help.

Hi all. In Monday i build new version of Armbian image for Orange Pi One and after this i get next error while loading: Spoiler This image contains newest version of U-Boot (2018.11). My old image build with 2018.05 U-Boot version. Loadin log of old image here: Spoiler This logs made at one PC. I am concerned that in the second case booter find 2 USB devices. but in first case - double number. Anyone can help me with problem. or better write to u-boot support. Or maybe i can build my image with oldest version u-boot...? But i dont known how make this. Thanks.

Hello, I have an Orange Pi+ 2 and Orange Pi+ 2e. I use Armbian, updated to 5.20 with these commands: sudo apt-get update sudo apt-get upgrade so I rebooted and can't start. What can I do? Thanks

Hi my opi PC suddenly display disappears as no signal. Later multiple times rebooted but no luck . it seems to PC is booting even keyboard mice gets power but no HDMI display. Green led blinks on booting. Please help to find put problem Rizwan

Hello I am using NPiNeoPlus2 board (ordered Neo2 but they send me Neo Plus2) I red this is not officially supported but it works some way The image works from TF but when I write it to eMMC it boots it works but can't reboot I type reboot and I get (serial) $ sudo reboot [sudo] password for onir: [ OK ] Stopped target Timers. [ OK ] Stopped Daily apt upgrade and clean activities. Stopping Authorization Manager... [ OK ] Stopped Stopping Session 2 of user onir. [ OK ] Closed Load/Save RF Kill Switch Status /dev/rfkill Watch. [ OK ] Stopped Daily rotation of log files. [ OK ] Stopped target System Time Synchronize…

I'm looking to build an ntp server using the OrangePi Zero 3 and I noticed there is no pps-gpio device tree overlay for the h616 chipset only the h5 chipset. Has anyone created a custom dt overlay? Thanks in advance.

Hi Everyone After several weeks (maybe months) seeking for a solution for my problem I decide to post it here and hope to get a fix for it. At first I still run an Cubietruck with Armbian (everytime the latest Version) with just a few services (Pi-Hole, RPi-Monitor) and for future use Apache, MariaDB and PHPmyadmin (just installed and running, but with no content). Now to the problem itself: The Cubietruck runs approximatly 6 to 10 days and then it's get stuck. Only a reset solve the problem for the next 6 to 10 days. On every crash I checked the syslog and it always show the following lines as latest entries: Jun 29 15:17:28 localhost systemd[1]: St…

Has anyone had any success with installing numpy on the NanoPi Neo Air? Installing via pip install numpy -v it hangs at these same lines every time: arm-linux-gnueabihf-gcc: numpy/linalg/lapack_litemodule.c arm-linux-gnueabihf-gcc: numpy/linalg/lapack_lite/python_xerbla.c arm-linux-gnueabihf-gcc: numpy/linalg/lapack_lite/f2c_z_lapack.c arm-linux-gnueabihf-gcc: numpy/linalg/lapack_lite/f2c_c_lapack.c arm-linux-gnueabihf-gcc: numpy/linalg/lapack_lite/f2c_d_lapack.c arm-linux-gnueabihf-gcc: numpy/linalg/lapack_lite/f2c_s_lapack.c I am unable to get a response from the serial terminal or ssh into the device whilst it hangs here. I'm cu…

hi.. after a couple of hours i cant go in to octoprint or ssh in to the device. green led still on but cant wake it up. even with pressing keys on a keyboard.. how can i turn off sleep mode??

I use a OPiPC as my mqtt and smb server. Until Monday I used an older version of Armbian (something around 5.20 I think) and everything worked flawlessly. Monday i did a mistake and destroyed the sd card filesystem (i was doing a backup with dd, but i've made a mistake making the sdcard as the output file). After downloading and installing the system on a new sdcard (Armbian 5.69 on a 32gb Kingston class 10 sdcard) I've experienced a few problems: --h3disp and h3consumption were missing (I've read that this is due them being incompatible with the latest kernel, which is sad because i'd like to turn off the ethernet and hdmi controllers as well as underclocking the cpu to …

I'm getting broken connections when I download big files from my Cubietruck. I've tried reducing CPU freq and setting eth0 to 100 half duplex, as recommended in various places. No joy though. It is said that a GMAC fix for this went into u-boot in mid 2015 but my u-boot appears to be older: $ strings /boot/linux/u-boot.bin | grep 201 U-Boot 2011.09-rc1-00000-gc1cb2f9 (May 30 2014 - 10:19:03) Allwinner Technology arm-none-linux-gnueabi-gcc (Sourcery G++ Lite 2010.09-50) 4.5.1 GNU ld (Sourcery G++ Lite 2010.09-50) 2.20.51.20100809 $ cat /etc/armbian-release # PLEASE DO NOT EDIT THIS FILE BOARD=cubietruck BOARD_NAME="Cubietruck" VERSION=5.20 LINUXFAMILY=sun7i BRA…

Alright so I am trying to use this OLED display: https://www.amazon.com/AITRIP-Display-SSD1306-3-3V-5V-Arduino/dp/B08JPYJ35Y?th=1 with Armbian(minimal) on my orange pi zero 2w, but I just cant get the i2c1 bus to detect it. Here's some more details: uname -r returns: 6.12.23-current-sunxi64 cat /boot/armbianEnv.txt returns: verbosity=1 bootlogo=false console=both disp_mode=1920x1080p60 overlay_prefix=sun50i-h616 rootdev=UUID=adb61282-df86-4116-9688-e94c56913687 rootfstype=ext4 overlays=i2c0-pi i2c1-pi param_i2c1_pin_sda=3 param_i2c1_pin_scl=5 user_overlays= usbstoragequirks=0x2537:0x1066:u,0x2537:0x1068:u sudo i…

hello, i want use ds2482-100 i2c-> 1wire maxim , but i not see with i2cdetect -y 0 in script.bin : [twi_para] twi_port = 0 twi_scl = port:PB00<2><default><default><default> twi_sda = port:PB01<2><default><default><default> -- [twi0_para] twi0_used = 1 twi0_scl = port:PB00<2><default><default><default> twi0_sda = port:PB01<2><default><default><default> [twi1_para] twi1_used = 0 twi1_scl = port:PB18<2><default><default><default> twi1_sda = port:PB19<2><default><default><default> [twi2_para] twi2_used = 0 twi2_scl = port:…