Allwinner sunxi

Hello, I try to communicate via SPI, if i try receive data over SPI on MISO pin I got message without last bit so I should receive 0x23 and i got 0x22. SPI is set on MODE 3. It has same behaviour on PI PC and PC2. If i try on RPi it works fine. Do you have anybody some advice ? Regards Jan

Hi everyone, I'm using the Orange Pi Zero 3 and would really appreciate a lightweight desktop image with just the XFCE desktop, a web browser, and basic tools (like file manager, terminal, etc.) with video acceleration. The current Armbian desktop image works, but it includes a lot of software I don’t need. I’m looking for something more minimal — just enough for light use and a faster experience. Does anyone have (or know how to build) a stripped-down XFCE image for this board? Thanks in advance!

Hi, After running nand-sata-install at the step "eMMC install: Formating /dev/mmcblk1 to ext4 ... please wait:" mount: wrong fs type, bad option, bad superblock on /dev/mmcblk1p1, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so. dmesg: [ 72.516530] EXT4-fs (mmcblk1p1): Unrecognized mount option "flush" or missing value [ 73.928286] EXT4-fs (mmcblk1p1): Unrecognized mount option "flush" or missing value [ 74.238966] EXT4-fs (mmcblk1p1): Unrecognized mount option "flush" or missing value [ 74.822857] +mmc_blk_issue_discard_rq,1809 [ 74.822921] mmc2:mmc…

Hi. I'm running Armbian Distro Debian 12 Minimal/IOT with Gnome GUI on an Orange Pi Zero3 2gb and 4gb models. I installed XRDP Xorg to be able to access from Windows 10. I can access the systems remotely, but both machines turn off after a short period of activity, somewhere between 5-10 minutes, whether they're idle or performing some activity. I've already looked for some hibernation/suspend option, but I only found something related to turning off the screen, which didn't solve the problem after being disabled. The Orange Pi Zero3 2gb machine ran for a few months using another version of Armbian recommended by the manufacturer's website without this…

All, Who is using kernel 4.3.0 with Debian Jessie on a cubietruck and what kernel config do you use ? I'm thinking to upgrade my Debian Jessie installation with kernel 4.3.0 but i can't make up my mind what to select to be compiled into the kernel. Thanks in advance, Kl@@s

hello, i have installed WiringOP it works good for switching relay module but I cannot make DHT 22 to work. Output looks like this Humidity = 0.0 % Temperature = 0.0 *C (32.0 *F) Humidity = 0.0 % Temperature = 0.0 *C (32.0 *F) Humidity = 0.0 % Temperature = 0.0 *C (32.0 *F) Humidity = 0.0 % Temperature = 0.0 *C (32.0 *F) Humidity = 0.0 % Temperature = 0.0 *C (32.0 *F) Humidity = 0.0 % Temperature = 0.0 *C (32.0 *F) Humidity = 0.0 % Temperature = 0.0 *C (32.0 *F) Humidity = 0.0 % Temperature = 0.0 *C (32.0 *F) Data not good, skip Humidity = 0.0 % Temperature = 0.0 *C (32.0 *F) Data not good, skip On one line there were possible good values bud it was one line of 1000.…

Hi all, I'm new here and I searched a lot how to connect a DHT22 on an Orange Pi. I found python and c script for the DHT11 but cannot make it work for the 22. I tried WiringOP without success. Does anyone suceed with this sensor? I think there is something on piprojects.xyz but it is not accessible. Thanks for any help Philippe

Good day all. Anyone having issues of not able to see anything after "Uncompressing Linux... done, booting the kernel." via serial console on Lamobo R1 ? Tried to experiment a bit, it seems that U-Boot works correctly, but in Linux kernel, sent data from USB-serial to ttyS0 arriving correctly, but anything written to ttyS0 is not visible on connected USB-serial adapter.

Hi, I'm fairly new to linux and I've been trying to get my banana pi OTG port to act as a HID device when plugged in. I've been looking to do it using configfs and usb_gadget but I have no idea how to get this working. Do I need to compile the kernel with additional options to get this working? I've googled for days now and tried various different solutions but not got far with it. Any help is much appreciated.

Hi, I tried to use default audio device, audiocodec hw:0,0 with arecord to record some sounds from mic. The file contains some noise. Any ideas how to activate mic?

How to install Home Assistant Supervised on Armbian 23.02 Jammy (plus minus, but quite installed on the previous release of Armbian, this is based on Debian 10) Performed exclusively without a graphical interface, from the console. Works stably on Orange Pi Lite , including a connected Bluetooth dongle via USB and sensors to it. 1. The first installation of Armbian and the subsequent creation of a user and passwords, the next is required to install all updates via sudo apt update && sudo apt upgrade -y . Then you need to install the Firmware update through the armbian-config ->System utility as in the screenshot. Скрытый текст …

I've just downloaded the Debian-server mainline image for my Olinuxino A20 Micro (Armbian_5.38 etc) and tried, without success, to change the video output from the default HDMI to the VGA one. Following the documentation (https://docs.armbian.com/Hardware_Allwinner/) I modified the boot.cmd file adding the lines: setenv video-mode sunxi:monitor=vga,hpd=0,edid=0 saveenv and recompiling it but the video continues to be enabled on the HDMI output, also after 2 (and more) restart. I noticed that in the boot splash screen a "Err: VGA" is reported. It's not too clear from the documentation if this setting can be applied also modifying the armbianEnv.txt …

Hello, I have a question about HDMI CEC in Armbian Stretch, is it possible to run this? After command lsmod I have module hdmi_hw_cec, I install libcec and cec-utils packages but cec-client still show "not devices". I read in sunxi wiki http://linux-sunxi.org/Linux_mainlining_effort#Status_Matrix that HDMI CEC should be active in revision 4.17, so when we can expect this version? :)

TRYING TO create an ad-hoc network using wireless adapter( lb-link model: wn155a) on NANOPI NEO (Linux nanopim1 3.4.113-sun8i #28 SMP PREEMPT Thu Feb 2 02:01:28 CET 2017 armv7l GNU/Linux). we used this link https://citricks.net/create-access-point-linux/ BUT ad-hoc WAS NOT CREATED. running iwconfig looks like: lo no wireless extensions. tunl0 no wireless extensions. ra0 Ralink STA ESSID:"11n-AP" Nickname:"MT7601STA" Mode:Auto Frequency=2.412 GHz Access Point: Not-Associated Bit Rate:1 Mb/s RTS thr:off Fragment thr:off Encryption key:off …

Hi, I have recently installed the latest Bionic on my Teres laptop. Unfortunately all the desktop elements are invisible: no icons or panels. Here is a photo: https://skyportal.xyz/_AUx7VZt6n2vp_QPu4LG4uLpafQMTK37xTFclUaK7rszfA

Hi Guys, sorry if its a stupid question I have edited the script.fex in the boot folder and enabled the extra uart ports on the board. #dmesg | grep uart [ 0.676838] [uart]: used uart info.: 0x3f [ 0.681530] [uart]: serial probe 0 irq 33 mapbase 0x01c28000 [ 0.707837] sunxi-uart.0: ttyS0 at MMIO 0x1c28000 (irq = 33) is a U6_16550A [ 0.712720] [uart]: serial probe 1 irq 34 mapbase 0x01c28400 [ 0.738944] sunxi-uart.1: ttyS1 at MMIO 0x1c28400 (irq = 34) is a U6_16550A [ 0.743804] [uart]: serial probe 2 irq 35 mapbase 0x01c28800 [ 0.770000] sunxi-uart.2: ttyS2 at MMIO 0x1c28800 (irq = 35) is a U6_16550A [ 0.774874] [uart]: serial pro…

Greeting, I installed the OrangePI plus image (desktop) on my Orange PI plus2. It seems to work fine but I can't get any video output. I tested with several h3disp settings, with a HDMI to VGA adapter then with an HDMI to DVI adapter, and finally on the A/V port. I have no hdmi screen to test direct connection without adapters. Ideally I would like to use the HDMI to VGA adapter. any ideas ?

Hello All, I have Orange Pi lite which I would like to use as an Airplay device, I have purchased a DAC of the internet and I am trying to connect it via the i2s protocol, According to this tutorial i need to edit the script.bin file to change the I/O configuration of the board. it was mentioned that this file is found in the boot folder, I have been looking and can find this file absolutely no where. What I have done, I downloaded Armbian, written it to a bootable SD card, mounted the SD card and then setup the orange pi via serial communication, I then connected to my WIFI, and set up SSH. I then logged …

Hello. Armbian_5.35_Orangepizero_Ubuntu_xenial_default_3.4.113.7z Orange Pi Zero 256 I am rading the bootlog via serial console. [FAILED] Failed to start Load Kernel Modules. See 'systemctl status systemd-modules-load.service' for details. # systemctl status systemd-modules-load.service â systemd-modules-load.service - Load Kernel Modules Loaded: loaded (/lib/systemd/system/systemd-modules-load.service; static; vendor preset: enabled) Drop-In: /lib/systemd/system/systemd-modules-load.service.d ââ10-timeout.conf Active: failed (Result: exit-code) since Sun 2018-12-30 00:20:40 CET; 3min 8s ago Docs:…

I want to completely disable display subsystem on Orange Pi Zero LTS (Debian 12 (Bookworm) minimal/IoT build 1 oct 2024). I blacklisted the GPU modules (lima, gpu_sched, drm_shmem_helper), but i can't find a way to disable sun4i-drm. Is there a way to disable it completely w/o recompiling the kernel?

I downloaded "Armbian_5.04_Bananapipro_Ubuntu_trusty_3.4.110_desktop.zip" but after installing I found that it has two basic issues >> (1) Mounting of USB sticks .. (2) No preinstalled classical Network manager .. so I wonder how to connect USB EVDO type modems in absence of network manager ? P.S :- target Board is Banana pi.

Cannot open this file: http://mirror.igorpecovnik.com/Armbian_5.14_Orangepi_Ubuntu_xenial_4.6.2.7z From http://www.armbian.com/orange-pi/ MD5 is: aed2af7290cc645ba7282d5fa78766a9 Please, reupload it

Can we get 5.1 sound with hdmi on Cubietruck? Or it's not impossible? (Tried search on Google but no success)

Hello, every one. I have two boards (pi one and pc plus). When I use Armbian_5.14_Orangepione_Ubuntu_xenial_3.4.112 Or Armbian_5.14_Orangepipcplus_Ubuntu_xenial_3.4.112, I can find /dev/video0 and use it by motion. But audio output is error. When I use Armbian_5.30_Orangepione_Ubuntu_xenial_default_3.4.113 Or Armbian_5.30_Orangepipcplus_Ubuntu_xenial_default_3.4.113, I can't find /dev/video0. But audio output working fine. I'm try to recompile https://github.com/avafinger/gc2035, but faild( just fllow the BSP example) Anybody know how can I do ? Thank you.

Trival endevour, though fun and easy to do. Text and diagram taken from zip file attached. Orange Pi Zero fan self adapting to temperature, inside Shenzhen Xunlong Software CO.,Limited manufacturered low profile (non-expansion board version) case. Probably can be used with other SBC's. FanDaemon source provided. Comes with no warranty of any sort. Use at your own risk. The software included works with Mainline Kernel 4.13 Armbian image. Run armbian-config - system - hardware, use arrow keys to highlight "pwm" and press spacebar to [*] enable it. Select save and reboot. Install the fan how you wish. …

Hi, I started using pinebook armbian buster when it was beta, it worked. From that beta I upgraded yeysterday and I see no display (LCD) after kernel starts (I only see the boot). The same using a new official image [1] I know there is another places to track this issue [2], but the thing is that in the official image page [1] it says it is fully working and that is not true. There are two options: - changing the status to something beta (like before) so you are less responsible of problems - putting an image that works [1] https://www.armbian.com/pinebook-a64/ [2] https://armbian.atlassian.net/browse/AR-443

Hi, I received a Banana Pi M2+ board on which I installed ARMBian. Their is only one problem for sound. Audio out is only available on HDMI. As I will use this board with no display, keyboard and mouse connection how may I get this board playing sound ? Two ways but I do not know which one is possible : 1) does it exist an HDMI to sound 3.5mm jack adapter ? 2) which USB bluetooth dungle works perfectly on ARMBian I may use to pair this board to a portable bluetooth speaker ? Sincerely thanks. Have a nice day. Miguipda ;-)

Hallo All, I installed Armbian bpi m2p. With both server and desktop after i change, off course. i getting stuck with apt-get update not working. error showing are "could not resolve faild to fetch. Anyone know how to solve this? Also there seems a problem with the ethernet adapter. When i want to add new connection, after selected new connection, i cannot chose in dialog menu, nothing can be changed or edit. with warm regards, Frank

Good day everyone, I am running into some issue while trying to update packages on my Nano Pi Neo Plus 2, I am currently running Armbian 23.02.2 Buster with Linux 5.15.93-sunxi64 on the board. I am trying to update my packages with apt-update however the error I am receiving back is the following: E: The repository 'http://mirrors.dotsrc.org/armbian-apt buster Release' no longer has a Release file. N: Updating from such a repository can't be done securely, and is therefore disabled by default. N: See apt-secure(8) manpage for repository creation and user configuration details. Can someone help me out to fix it? Thanks in advance!

Hello, recently i bought Orange Pi Win Plus board and have installed Armbian (Ubuntu xenial server) on it. With stock kernel linux-image-dev-sun50iw1, linux-headers-dev-sun50iw1 and linux-dtb-dev-sun50iw1 all hardware working ok except USB DVB tuner myGica T230, needed for me, which has not enabled in kernel configuration. I found linux-image-dev-sun50iw1 (https://www.armbian.com/kernel/, section Allwinner A64), its sources and etc has been removed from Armbian repository. This is question N1: maybe someone has sources for this kernel for build? Today i'm trying to build 'next' and 'dev' kernels for this hardware in Ubuntu 16.04 VM 'DEV'…

I configured Armbian on a mSD card and decided to try and move it to the eMMC. I used the nand-sata-install utility, All files from the mSD card are copied, and the last step fails. I get Error: no u-boot package found, exiting Any pointers?

opi pc arm 5.10 ALSA no output from speakers but output only available through hdmi. when installed pulse audio able get and change audio hdmi to analog but when switched to HDMI playback hangs and freezes. Any solution?

Hi! I am experiencing problems with sd image install into NAND. Steps to reproduce: -Start with fresh cubie2 board (single a20 processor, image on this page: http://cubieboard.org/2013/06/19/cubieboard2-is-here/ ) -Image from link ( http://www.igorpecovnik.com/2013/12/24/cubietruck-debian-wheezy-sd-card-image/ ) -Selected "Cubieboard 2" / "Debian wheezy" / "24.8.2015, 3.4.108", image: ( http://mirror.igorpecovnik.com/Armbian_4.2_Cubieboard2_Debian_wheezy_3.4.108.zip ) -In the end, its a file "Armbian_4.2_Cubieboard2_Debian_wheezy_3.4.108.raw" -Use win32diskimager, write it to sd card, then boot from -First time root password is "1234" it will ask for a change, do …

Hi, I've tried setting up an SD Card to boot from and I'm getting the strangest issues. I've tried multiple images and even compiled my own and I'm getting the same issue. I'm booting from SD Card because I have the stock ubuntu running on the emmc right now and I don't want to flash that until I know the image works the way I want it to. Here are the logs I've got from the console on boot. I followed the directions with 7z and Etcher from the documentation page. Thanks for the help! starting USB... USB0: USB EHCI 1.00 USB1: USB OHCI 1.0 scanning bus 0 for devices... 1 USB Device(s) found scanning usb for storage…

Hello, Is a native 240p timings/resolution possible from the OrangePi PC via the A/V jack? I'd like to use it hooked up to a nice CRT for emulation.

my opi pc only hosts smb/nfs/transmition, very hot at summer. Welcome to ARMBIAN 5.38 stable Debian GNU/Linux 8 (jessie) 3.4.113-sun8i System load: 0.23 0.23 0.22 Up time: 68 days Memory usage: 28 % of 1000MB IP: 192.168.2.99 CPU temp: 65°C Usage of /: 26% of 7.2G when I change cpufreq gov, find no cpuidle driver, is that true? upstream status about cpuidle driver? I have to disable 2 cores to cool down, and also change cpufreq to ondemand.

The software download page for the Cubietruck only has the new Armbian Stretch images available to download, are the images for the previous version Armbian Jessie still available to download? I'm thinking of updating to Stretch but would like to have the option of going back to Jessie. I have tried searching but to no avail. Thanks.

The other day I literally burned my fingers when trying to figure out why my mostly idle bpi-m2+ did not respond. Unfortunately I forgot to throttle the CPU/RAM with the h3consumption tool. Which settings would you recommended for a M2+ in order to avoid overheating? To my surprise the overheating also happened without high loads.

[WIP] Schematics Pros: - board vendor actively participates (listens to the community, provides information including schematic and cares about correctness, tries to bridge developer community and chip vendor) - board vendor take care of their board configuration and submit patches - board vendor provides dev samples - yet another A64 - good powering method Cons: - none specific to this board

Board: Orange pi zero. wifi xr819 driver how to install and start it, step by step. please help

Hi, can anyone let me know if we can enable a UART port from a DTB file? Means like compile DTB to DTS, make changes and then again recompile it to a DTB like we do in the script.bin file of legacy kernel. Earlier I have used to mention "overlays=uart1 uart2" in the armbianEnv.txt file but, this didn't work for me .

Hi, now that I have Docker up and running, I am facing new problems. After some time, the Zero stops working. I am connected with ssh, and the console is stuck. The port 22 seems to be still opened for nmap, but I can't open a new ssh session anymore. I was trying to monitor it with armbianmonitor -m, and I saw the processor throttling with the temperature rising. Up to 62°C, it stays at 1200MHz, then it goes down to 960MHz, and I saw it once at 480 around 72°C. As I thought that my problems were linked to the heat, I then used a fan and the temperatures stayed at max around 63°C and the CPU at 1200MHz. But the problem still happens. Af…

Hello everybody and sorry to be sooo stupid. I used to play with Orange Pi Zero H2+ and there was RJ45: it allowed me to connect it via the LAN. Now, with the H5 version, there is no RJ45 connector. And there is no USB port. So how to gain access to this card to start configuration etc... ? Thanks in advance.

Hi, I am currently testing an Orange Pi 3 with your nightly distributions (for instance Armbian_5.83.190424_Orangepi3_Ubuntu_bionic_dev_5.0.9), and they work fine but have some issues. The main issue is that the ethernet link status display does not really work. When I unplug my ethernet cable, the "Link detected" is alwayes 'yes" within ethtool. As I am trying to configure my board in bonding mode with an external wifi usb adapter (because the embedded wifi is not yet supported by armbian for Orange Pi 3), my bonding is not working because the link status on eth0 is always yes. I have also checked /sys/class/net/eth0/carrier and it is always "1" e…

Hi all. I have problem with SPI on my board . I find solution but I want to know why .. On first : Linux orangepizero 5.4.20-sunxi #20.02.1 SMP Mon Feb 17 02:09:41 CET 2020 armv7l armv7l armv7l GNU/Linux If go to armbian-config and enable SpiDev .. then reboot not find SPI device on my dev tree .. if look to armbianEnv.txt there is spi-spidev but on dev tree no SPI device .. My solution is this : on /boot/dtb/overlay is file sun8i-h3-spi-spidev.dtbo , decompile it and there is this text : /dts-v1/; /plugin/; / { compatible = "allwinner,sun8i-h3"; fragment@0 { target-path = "/aliases"; __overlay__ { spi0 = "/soc/spi@01c6…

I own an orange pi PC PLUS for about a year and when I got it, I tested it and it worked fine when it booted up from the internal MMC, then I tried to make a server and I think I messed up something with the LAMP I was trying to make so I stashed the PI to play with it later. Now when I turn on the PI, it only loops and never loads the OS, so I downloaded Focal and buster from this link and burned them to an SD and it also loops in this screen, https://imgur.com/WzikUoo what could be wrong? my idea is to reinstall the OS to the internal MMC so I can then install home assistant. thanks in advanced.

Hello! I have to install Igor' s image ( SD-Card) in graphical mode on XRDP or VNC for my BananaPi A20 for a SATA Port Multiplier JMB321 Port Multiplier But I do not know which is good. try installing ubuntu Igor' s image and is not a graphical mode. Thanks in advance I want to use this tutorial http://www.htpcguides.com/rebuild-bananian-kernel-with-sata-port-multiplier-support/

Hi! Wanna ask you guys about raid support on armbian. I have OPiPC with desktop debian based armbian and have no /proc/mdstat file. For me it means that i have no raid support (or i'm wrong?) Raid drivers are avaliable in server version of debian? Or i dont get something? I just want create raid5 or similar. Can you help me? Regards

I have the latest armbian running on Orange Pi Zero (H2+) root@orangepi:~# uname -a Linux orangepi 4.14.18-sunxi #24 SMP Fri Feb 9 16:24:32 CET 2018 armv7l GNU/Linux During boot kernel creates 256 virtual tty devices: root@orangepi:~# ls /dev/tty* [0/433] /dev/tty /dev/tty38 /dev/ttya1 /dev/ttyc2 /dev/ttye3 /dev/ttyq3 /dev/ttys2 /dev/ttytd /dev/ttyve /dev/ttyxf /dev/tty0 /dev/tty39 /dev/ttya2 /dev/ttyc3 /dev/ttye4 /dev/ttyq4 /dev/ttyS2 /dev/ttyte /dev/ttyvf /dev/ttyy0 /dev/tty1 /dev/tty4 /dev/ttya3 /dev/ttyc4 /dev/ttye5 /dev/ttyq5 /dev/ttys3 /dev…

Hi, I'm migrating from the OrangePi image to Armbian, and can't make the touchscreen working, it does not respond to any actions. It works pretty well on the OrangePi's image. Did I mess up something here? uname -a: Linux orangepizero2w 6.6.31-current-sunxi64 #1 SMP Fri May 17 10:02:40 UTC 2024 aarch64 GNU/Linux Touchscreen DTS: /dts-v1/; /plugin/; / { compatible = "allwinner,sun50i-h616"; fragment@0 { target-path = "/"; __overlay__ { backlight_gpio: backlight_gpio { compatible = "gpio-backlight"; gpios = <&pio 8 14 0>; // PI14 …

Just run these commands one by one : sudo apt-get install git automake libglib2.0-dev gstreamer0.10-alsa gstreamer0.10-tools libgstreamer0.10-dev libupnp-dev libxml2-dev gstreamer0.10-plugins-base gstreamer0.10-plugins-good gstreamer0.10-fluendo-mp3 gstreamer0.10-pulseaudio pulseaudio git clone https://github.com/hzeller/gmrender-resurrect.git cd gmrender-resurrect ./configure LIBS=-lm make sudo make install gmediarender -f OPI and to add video play back install gstreamer: sudo apt-get install gstreamer1.0 the last command run gmediarender server and now u cat sream audio from phone using any app that support dnla. like this app: https://play.google.com/store…

Hello, I need your help to know if it's possible to dump an img to sdcard to make it's working android on my orange pi pc? For testing purpose i 'm linux man and i will say android is a piece of shiit if you ask me! I find an image from Beelink X2 and now i supose i 'm succes to unpack img to fex files... Is needed to modify boot.fex to boot from sdcard (default choice on OPC H3) or just extract system.fex to have my rootfs and take normal armbian bootloader? I dreaming or there is a way like that? (I'm bambi in android world, don't hurt me) ./imgrepacker ../Android/update_X2_v106k4.img ==========================[ START ]==================…

I'm trying to boot my Nano Pi Neo 2 from the network but I am a bit stuck. I have found out how to add network support to u-boot for the Nano Pi Neo 2, I can set the serverip and perform the dchp command, the Nanopi neo get's an IP address from the DHCP server but then booting halts with the message that it can't find the file. I'm pretty sure the location & access rights are valid. (Is there an easy way to check?) U-Boot 2018.09-rc3-00026-g4cdeda511f-dirty (Sep 10 2018 - 16:37:11 +0200) Allwinner Technology CPU: Allwinner H5 (SUN50I) Model: FriendlyARM NanoPi NEO 2 DRAM: 512 MiB MMC: SUNXI SD/MMC: 0 Loading Environment from FAT... Unable to use mm…

Hi, I'm using an Olimex Lime 2 board with the debian jessie image and 4.1.6-sunxi kernel. Is there a way to look at the battery state?

In Ubuntu Xenial how do we disable framebuffer switching and font switching? My Orange Pi Plus 2e v1.1 has the usual problem with HDMI-to-DVI converters but it's unusual in this case because it's switching framebuffers and fonts. The screen appears just fine during boot, but just after the message "Starting kernel..." the screen blanks and goes into power-saving poweroff with no return. I've seen this before, and I have tried several things to prevent the dead screen. I tried editing /boot/armbianEnv.txt to contain these lines like I have on other SBCs like PINE A64 and older Orange Pi devices that solved this problem: disp_mode=720p60 disp_dvi_compat=1 I …

Hello, i use my BananaPI M2 Plus as a home router. i have eth0, eth0.10 (vlan 10), eth0.1111 (vlan 1111) on eth0 i have External IP from ISP by DHCP (original MAC ADDRESS) on eth0.10 i have internal IP (192.168.10.1) (different - generated MAC ADDRESS) on eth0.1111 have external IP from ISP for settopboxes. (cloned MAC ADDRESS from settopbox) my issue is that 192.168.10.1 is unreachable after reboot. Have no idea why. i discover that if i switch eth0.10 to promiscuous mode (tcpdump -c 10 -i eth0.10) after reboot it works. any idea to make it less dirty? thank you.

OK

I am trying to start snap multipass on the device nanopi k1 plus, getting the following error: root@nanopik1plus:~/testSnap# multipass start launch failed: Internal error: qemu-system-x86_64 failed getting vmstate (Process returned exit code: 1) with output: qemu-system-aarch64: -nographic: No machine specified, and there is no default Use -machine help to list supported machines

as per title, armbian sucks. The last version is totally broken, unusable. Only one quarter of the screen is readable, the rest is black: why nobody has said that? Why nobody says that vlc and mpv crashes every 2 min making watching a movie impossible? The once half-decent armbian is ready for the bin now

hi all . the illustlation is sd card's role is booting only . detail is http://forum.armbian.com/index.php/topic/977-usrlibnand-sata-installnand-sata-installsh/

Hi all, I am running a lime2 board with trusty as a server. Now I wanted to upgrade to xenial and used the standard Ubuntu way using "do-release-upgrade". Since that failed and resulted in a not booting image I was now wondering if this is the right approach for armbian as well. I was searching the docs but couldn't find what I was looking for. Thanks Chris

Hello. Sorry for my bad English. I have just acquired an Orange Pi plus 2e. Armbian Xenial is installed on emmc. I wish my SD card to become my /home. Can you help me? Thank you.

Hello, I own several Orange Pi 3 which I bought at different times. The last batch couldn't run the firmware I used previously: the ethernet was broken. So I suspect there is a new ethernet chipset on it. Current Armbian (Armbian_22.08.1_Orangepi3_jammy_current_5.15.63) works on both types. How could I differentiate the chipsets from the command line? Thank you

Just downloaded armbian, but there is no wlan0. Looks like there is some mess with driver versions... Am I rigth? Can you update img file? Or I shell compile it by myself? > ifconfig bond0 Link encap:Ethernet HWaddr 00:00:00:00:00:00 UP BROADCAST MASTER MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 TX bytes:0 (0.0 eth0 Link encap:Ethernet HWaddr 02:07:07:43:22:60 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0…

Hi guys, I know cubieboard A10 is already out of support, nevertheless I was able to make the right image work for it with a cubiescreen. Armbian gave me a way to make my own image without so much problems. The only issue I am having right now is that my touchscreen stops working after a while with errors like this: msg ft5x_i2c_rxdata i2c read error: -121 ***CTP***ft5x_read_data:893 read_data i2c_rxdata failed: -121 bus is busy, status = f9 Retrying transmission 2 I asume that my kernel patch for this touchscreen is not longer working. I have found that some guys manage to make it work under kernel version 3.4.79. So I tried to c…

Hello. I'm writing a program that requires sound.target. I was reading about sound.target and how it's a special systemd unit that doesn't load until the system finds the sound card. Armbian takes quite a bit of time to find the sound card on the OPi, around 30 seconds. Or, maybe it's something else that's making it take so long. I was wondering if there was a way I could mess around with systemd or something else to make the sound card found faster, thus sound.target and my program loading faster upon powering on the device. Thank you

Hello guys. I need prepare a lot of cards. Is there any way how to chroot img? I use this setup for raspbian http://sentryytech.blogspot.cz/2013/02/faster-compiling-on-emulated-raspberry.html but armbian have only one partition and that is too much voodoo for me.

So when I ssh into Armbian on the OPI PC, I see the cpu temperature at 50 degrees Celsius, and the number is red (in the "header"). Should I be worried about that? 1 core is constantly at 70% (this Mycroft is a bit resource hungry), while other cores are at 1% in htop. Thanks for the help in advance! Awesome distro btw!

Hi guys, I wonder if someone could point me in the proper direction, got stuck with DosBox performance for several days already( Orange Pi+2e, legacy Mali supported (AFAIK) Ubuntu image, DosBox 0.74 and old good DOS games like C&C, Doom, UFO, Red Alert etc. I have tried all reasonable settings combinations in DosBox config - output, render, scaling, all with no good - performance almost isn't playable even with normal2x scaling( I was quite sure that legacy image should provide to DosBox some standard interface for hardware rendering/scaling support (with opengl, probably), but it seems to be wrong. Or the problem is on DosBox side? Do I expec…

Hello, I have a couple of NEO Pi Air's and they show up as the same device in LightBlue. After a bit of digging, I noticed that the BD addr of the devices are the same. hci0: Type: BR/EDR Bus: UART BD Address: 43:29:B1:55:01:01 ACL MTU: 1021:8 SCO MTU: 64:1 UP RUNNING RX bytes:6552 acl:180 sco:0 events:373 errors:0 TX bytes:6809 acl:180 sco:0 commands:248 errors:0 Is there any way to change the address?

does orange pi zero2W support the headsets with built in microphone or not? I do not see any MICINN in the 24 pin connector?

I've installed this library on an Orange Pi PC Plus running 'Armbian 5.31 stable Ubuntu 16.04.3 LTS 3.4.113-sun8i' with all updates and I would like to use wiringPiI2C but it doesn't work with either /dev/i2c-0 or /dev/i2c-1. My USB storage CRO device shows no output at all when I attempt a write to an I2C device on connector pins 3 and 5 (BCM pins 2 & 3). the 'gpio' app and 'blink' example apps that come with the library wiggles these and other pins as outputs, no trouble at all. I'm porting a library that interfaces to a DS3232 or DS3231 real-time-clock chip from Arduino and have used the initialisation sequence from the example in the WiringOP librar…

hello, i am setting up Mopidy in Orange Pi PC2 with armbian. but i found it only playback to the on-board sound card not the USB DAC i connected. root@orangepipc2:/# aplay -l **** List of PLAYBACK Hardware Devices **** card 0: Codec [H3 Audio Codec], device 0: CDC PCM Codec-0 [] Subdevices: 0/1 Subdevice #0: subdevice #0 card 1: allwinnerhdmi [allwinner,hdmi], device 0: 1c22800.i2s-i2s-hifi i2s-hifi-0 [] Subdevices: 1/1 Subdevice #0: subdevice #0 card 2: Audio [iFi (by AMR) HD USB Audio], device 0: USB Audio [USB Audio] Subdevices: 1/1 Subdevice #0: subdevice #0 i found there is no asound.conf in /etc ... …

Is there anyone who familiar with H3's secure boot? I've got an ott box recently, with 1GB RAM, 8GB eMMC, H3 soc, wifi module is RTL8189FTV. I try to use sunxi's tools FEL to boot, but not succeed. But the nanopi-M1 board can be booted up with FEL. when change the u-boot-SPL's textbase, and set it to SRAM-C's space-0x10000. FEL can download the spl and execute it. The SPL init the DDR. Then download and execute u-boot. u-boot can run, but cannot reach cmdline. the datasheet shows that H3 support secure boot feature, but I can't find any documentation about this. Through the H3's SDK, I got some information about sbrom. I still wonder how to set the…

Hi all, I'm trying to use a BENQ FP767 monitor with a Cubieboard2 using Legacy Server Jessie 5.25 image. The system is composed: Cubieboard -> HDMI to VGA converter -> Monitor. The bootloader works perfectly and I can see the boot phases in monitor which is synched to: 1280x1024 H.F : 79 KHz V.F : 75 KHz When Linux start the monitor frequencies change and chars are almost unreadable: 1280x1024 H.F : 67 KHz V.F : 59.7 KHz I've tried to change boot.cmd monitor settings from: ​ setenv disp_mode "1920x1080p60" to ​ setenv disp_mode "1024x1080p75" end compile changes with # mkimage -C none -A arm -T …

Is it possible to add this camera: VGA OV7670 CMOS camera module - 0.3 Megapixel lens / 640X480 to the Orange Pi PC2 H5 64bit? (all info related to my Orange Pi are stored here http://ix.io/1BW3) The ribbon cable fits the socket (although pin numbering are reversed), but I have not found any relevant info googling the internet. I'm wondering if anybody experimented already this coupling. Thank you.

Hi all! Could someone help me? I am triying to setup Kedei 3.5 HDLCD touchscreen. I found a common example sunxi-DT-overlay for ads7846. /dts-v1/; /plugin/; / { compatible = "allwinner,sun4i-a10", "allwinner,sun7i-a20", "allwinner,sun8i-h3", "allwinner,sun50i-a64", "allwinner,sun50i-h5"; fragment@0 { target = <&pio>; __overlay__ { ads7846_pins: ads7846_pins { pins= "PA7"; function = "irq"; }; }; }; fragment@1 { target = <&spi0>; __overlay__ { #address-cells = <1>; #size-cells = <0>; status = "okay"; ads7846@0 { compatible = "ti,ads7846"; reg = <0>; /* Chip Select 0 */ …

Hi guys, I've just downloaded Jessie image with legacy kernel for my Orange PI PC device (Armbian_5.04_Orangepih3_Debian_jessie_3.4.110). At first boot it has stated something about forced password renewal policy and has rebooted the device. After the reboot during login process it has asked me for a new password and then has showed "authentication token manipulation error" message. Now I cannot login because password renewal process ends with the error. By the way yesterday I built my custom armbian image for the same configuration and today I have the same issue with it too. Could you please help me?

I have an Orange Pi PC with the Allwinner H3 processor running the latest 5.20 version of Armbian. I am unable to successfully connect to a Wireless access point because as soon as the status of connection is "Obtaining IP address" the Orange Pi PC crashes and reboots. I have tried this with both a reputable Edimax wifi dongle and a cheapy wifi dongle with the same results. I can have them plugged in and the OPi and it will run fine but as soon as I try to connect to a wireless network, it crashes. I have the OPi PC connected to a variable power supply capable of 3A and it isn't getting anywhere near that. So my 5V isn't a problem. I have updated and upg…

Hi there, I have problem with recovering "sudo h3consumption -m 1200 -c 4" on Orange Pi Zero, where it activates just 2 cores. No idea why. When I used "sudo h3consumption -m 900 -c 1" it worked fine, but now, when I am trying to recover all 4 cores it activates just 2 cores. Which files h3consumption changes? (so I will be able to backup them with clean install and the restore them once needed to recover settings for all 4 cores). And I found out, that with "sudo armbianmonitor -m" it shows CPU changes 900Mhz, 1018Mhz (dont remember exact values) but now it just shows 480 P.S. I made backups of these files: sudo cp /etc/backup_2017_05_21…

Hi, I have a problem with an update notification that seems to be permanent. The following lines always appear when I log onto my system: Welcome to ARMBIAN 5.36 user-built Debian GNU/Linux 8 (jessie) 4.13.16-sunxi System load: 0.71 0.63 0.62 Up time: 1 day Local users: 2 Memory usage: 29 % of 995MB IP: 192.168.2.103 CPU temp: 42°C Usage of /: 60% of 15G [ 0 security updates available, 2 updates total: apt upgrade ] Last check: 2017-11-26 00:0012 After sudo apt-get update and upgrade the lines telling me that 2 updates are available are still …

Can you power Prime with OTG port? Or does only PSU work?

Is there any way to get a video player to display subtitles on an H3 board? I've tried VLC and SMPlayer, but neither are able to do so (the problem seems to be that the video output is overlayed *over* the system display rather than mixed with it on a per-pixel basis, so while the subtitles are being displayed by the player, they simply aren't visible). Is there any adjustment/update/other player I can use to fix this problem? Orange Pi Plus 2 I have armbian 5.05 installed, so not sure if there are any updates that might help?

I just updated my armbian kernel, I did it with: apt-cache search linux-generic to find the images and sudo apt-get install name of the image to install, the new kernel is in the /boot folder but if I restart It continues to start with the old one, and if I eliminate the old one it no longer starts. How do I select the new kernel to boot from it? i use orangepi+2e

Hey guys, Firstly thank you very much for that amazing project and giving life to our opis. I really like armbian jessie desktop but I prefer ubuntu based distros. I find an xenial image from the armbian site and install-upgraded. Then I installed lubuntu-desktop. Looks very good seems very fast and smooth but I can't listen musics with audacious. Sound comes distorted and laggy. What can I do to get armbian desktop quality playing video and mp3 files.

Hi, I'm trying to activate WiFi access point on my Orange Pi that using internet over ethernet cable. On my friend's computer we've flashed and activate Access point on armbian-config menu, but in newer releases of armbian(that i've downloaded yesterday) armbian-config menu doesn't contain such option to activate access point. I want to know how to activate access point in current release, or can i? Thanks in advance.

Was playing around with a well tuned system, wanted to upgrade my kernel - but seem to have broken something. I was on 5.37 - manually upgraded to stretch and everything was working quite well. Today tried upgrading my kernel, and was playing around with `armbian-config` to switch kernels, but didn't go so well. After a reboot had no network. Plugged in the serial console, and was greeted with the following. pi@orangepione:~$ uname -a Linux orangepione 4.11.12-sun8i #2 SMP Wed Nov 22 13:50:32 CET 2017 armv7l GNU/Linux pi@orangepione:~$ dpkg-query -W -f='${Version}\n' linux-stretch-root-orangepione dpkg-query: no packages found matching linux…

Hi, in the last weeks I'been trying to use the serial ports 5 and 6 (tty5, tty6) of the cubieboard2 using DTB but still not working. First of all, I must said that i'm not a linux expert, only a linux user with some experience and all the information below is the result of multiple weeks of internet research. for the moment i'm able to get the cubieboard2 to recognize the ports, and using a c++ program I write on all serial ports, i get a response from tty0 but can't get the gio pins of the serial ports 5 and 6 to work. here is what I have done so far: first, I downloaded the device tree compiler sudo apt-get install device-tree-compiler then, nav…

Hi, I seem to have "fried" the default Debug TTL UART (the 3 pins next to the hdmi connector). (connecting the ground of the usb-ttl to TX of the UART and leaving it there for a few minutes is not a good idea it seems :-)). The orangepipc+ still works when booting from emmc (armbian 5.17 debian jessie, kernel 4.7.3) but does not seem to want to boot from microsd (tried console only 5.17/4.7.3, 5.21/4.8.1). So I would like to debug that but whatever usb-ttl I connect I don't see anything (tried 3 different usb-ttl to make sure it was not the usb-ttl device)> My question: is it possible to see uboot messages (or at least the kernel boot) via a different port…

armbianmonitor output: http://ix.io/4qwA I assume it's crashing as I have no display connected to it. Every few days I just notice I can no longer reach the network folder, but it works after a power off/power on. Not much running on it, samba for file share and deluge for occasional downloads. I also recently run an update, upgrade and dist-upgrade, but it didn't help. I don't really know what should I look for in the log. OS: Armbian buster (21.02.1) armv7l Host: LeMaker Banana Pi Kernel: 5.15.93-sunxiC CPU: Allwinner sun7i (A20) Family (2) @ 960MHz

Hello. I have a problem on my Orange PiPC+ board. After playing mp3 file, I hear some sound click. As I understand, snd driver goes to the power save mode. I tried to disable it. I set snd-soc-core.pmdown_time=-1 It did not work for me. How can I fix it? Additional information: clock@orangepipcplus:~$ uname -a Linux orangepipcplus 4.19.62-sunxi #5.92 SMP Wed Jul 31 22:07:23 CEST 2019 armv7l armv7l armv7l GNU/Linux clock@orangepipcplus:~$ sudo armbianmonitor -u System diagnosis information will now be uploaded to Please post the URL in the forum where you've been asked for. I don't see…

Hello everyone! You need to run an orange from battery power. I achieved by lowering the frequency of the current to 160mA. But I can't turn off the GPU. since I don't need it and ethernet. uname -a Linux orangepione 5.9.14-sunxi #20.11.3 SMP Fri Dec 11 20:31:12 CET 2020 armv7l GNU/Linux root@orangepione:~# I installed the h3consumption utility, but it does not output information to the console. root@orangepione:~# h3consumption -p root@orangepione:~# from teams root@orangepione:~# h3consumption -g and root@orangepione:~# h3consumption -g off change but no current. I think the core is very new. I don’t know which way to go,…

After a clean install of 22.11.1, I edit /boot/armbianEnv.txt to add: overlay_prefix=sun8i overlays=uart3 i2c0 spi-spidev param_spidev_spi_bus=0 and reboot. After the reboot I list the /dev files of interest and there is/are no "spi*" entries: pi@orangepipc:~$ ls /dev/i2c* /dev/spi* ls: cannot access '/dev/spi*': No such file or directory /dev/i2c-0 /dev/i2c-1 pi@orangepipc:~$ Not sure if it makes any difference but I only have power, HDMI, and RJ45 connected to the board at this time, and nothing connected to the GPIO pins. Below are the states of two files, one from which I got the BOARDFAMILY, and …

Hi! I have an OPiPlus2, the official product page says that the soc runs on 1.6ghz, but the cpufreq-info says it's hardware limited to 1.3ghz, so what now? Thanks in advance and sorry if I miss something!

Hi! I got a strange problem. When I run apt-get update OPiPC hangs and don't respond to anything. Last thing I see is: root@dbot:~# apt-get update Get:1 http://security.debian.orgjessie/updates InRelease [63.1 kB] Get:2 http://apt.armbian.comjessie InRelease [8,682 B] Get:3 http://apt.armbian.comjessie/main armhf Packages [95.8 kB] Get:4 http://httpredir.debian.orgjessie-updates InRelease [145 kB] Ign http://httpredir.debian.orgjessie InRelease Get:5 http://apt.armbian.comjessie/utils armhf Packages [3,702 B] Get:6 http://security.debian.orgjessie/updates/main armhf Packages [320 kB] Get:7 http://apt.armbian.comjessie/jessie-desktop armhf Packages [7,368 …

Howdy, I set up a new OrangePi Zero with the Legacy 3.4.113 Ubuntu Xenial. I was able to get wifi working however when I try to do a sudo-apt get update or upgrade it freezes and crashes. I am using a 32gb Samsung Evo. Cpu temp is hovering around 57 C with no load. Any tips besides reinstalling the image?

trying to get ili9340 to work on orangepi pc2 on bionic 4.14.91 ... there's a fb_ili9340 module in the staging directory, modprobe passes and the only thing in dmesg is warning it's staging nothing else but when I check /dev/fb* there's only /dev/fb0 (the original hdmi output on my monitor), there's no /dev/fb1 anyone can land a hand? give a hint?

Hi all, I wrote this dts to enable a high PG12 pin int the Bananapi M2P H3 can it be okay? /dts-v1/; /plugin/; / { compatible = "allwinner,sun8i-h3"; fragment@0 { target = <&pio>; __overlay__ { bt_pins:bt_pins { allwinner,pins = "PG12"; allwinner,function = "gpio_out"; }; }; }; fragment@1 { target-path = "/"; __overlay__ { bt: bt { compatible = "gpio-bt"; gpios = <&pio 6 12 1>; }; }; }; };

Hi, I have connected Orange Pi Lite over serial UART, but looks like the default settings are to not output the boot log to serial. You can only see U-Boot messages, then "Uncompressing Linux kernel" and after some time the login prompt comes. What exactly do I need to change/configure to get the classic kernel boot log to serial console? Thanks

hi new armbian user here.. ive recently got a pcduino v3b and the old OSs for it suck, cant update anything or find what i need... ive tryed downloading a few builds of armbian for pcduino, but im having some issues, firstly hdmi doesnt boot, i mean, never get anything on screen, the only access i have is via the serial port ive just grabbed the latest build that says the board is supported, but i cannot get a network connection, ethernet is plugged an 'up" but no ip or connection, and it seems the onboard wifi cant be found either.... also receiving error messages about failing to reset the ethernet dma ... Starting kernel ... [ 28.028075] sun7…