Allwinner sunxi

Ive just gotten a orange pi zero, fairly inexperienced with linux too. Ive been trying to get a distributed.net client running on it. Does anyone know if this is even possible? I tried a few differnt versions (ARMEL, ARM/eabi and ARM/ELF) always get a no such file or directory when trying to run them using ./dnetc Cheers

I'm trying to use a c270 webcam, but it is not listed on USB devices. Can someone help me?

Hi! I'm using Orange Pi Mini with Armbian_4.2_Orangepi_Debian_jessie_4.1.6. AP mode seems not to work as manual. hostapd-rt and hostapd.conf-rt seems better but I cannot find the AP. Please advise me! Thanks in advance. ----------------------------------------------------------------------------------------- FYI, root@orangepi:~# lsmod Module Size Used by r8188eu 396949 0 evbug 1484 0 evdev 9340 0 sun4i_ts 3722 0 root@orangepi:~# hostapd /etc/hostapd.conf Configuration file: /etc/hostapd.conf nl80211: Driver does not support authentication/association or connec…

I have a cubieboard2 running Armbian_4.5_Cubieboard2_Debian_jessie_4.2.3.zip and when I ran a seemingly innocent "npm search" command, the system became extremely slow. It responded to pings, but SSH commands were taking many minutes to complete. I was able to grab a screenshot of "top" while it was in this state (attached). Root is on SD, I set up a 1GB swap partition over SATA. My questions are: * Is setting up a 1GB swap partition over SATA a bad idea? * Why do all of the processes suddenly report 100% CPU when main memory runs out? * How can I prevent this in the future? * Is there any other diagnostics or tests that can help determine the root cause? Thanks…

Hi, I am running the latest Armbian stable headless build with legacy kernel for a few weeks now without issue (tvheadend, cups, sane, shairplay-sync, pi-hole). Yesterday I added a dvb-c stick from sundtek which works pretty well. However, I noticed that only 1 USB port works (the one by itself). I can either connect the dvb-c stick or my printer/scanner. Attaching another device to either of the other 2 USB ports does not work... What am I missing?

Friends, I need analog audio out working from CLI and not hdmi audio. Anyone knows any patches for LTS or mainline kernel for Orange PI PC. I need them for mainline kernel or LTS only and not legacy. I mean does CLI audio work in mainline or LTS? Please do let me know Thanking you

Hello Armbian community. I have tried to start the latest image of Armbian Xenial Desktop on my cubieboard 2 and it does not work. I have exactly the same issue as this previous issue:

I bought an orange pi lite 2 and I would like to use it with the ADC MCP3008 but when executing the code in python using the spidev library, it always returns the value of 1023 and when I disconnect the ADC it keeps showing the same value, it is as if there was no communication , The ADC is not the one with the problem since I tried it with an arduino mega and it works perfectly, it is in the orange pi lite 2 where it does not work. the connections are: VDD=3.3V VREF=3.3V AGND=GND CLK= (PC00) SPIO_CLK DOUT=(PC03) MISO DINT=(PC02) MOSI CS = (PC05) SPI0_CS0 DGND= GND import spidev import time spi = spidev.SpiDe…

Hi. Please help me to understand how hardware encoding works in nanopi with H3 chipset. I have newest version of armbianos: cedrus and related modules is loaded by kernel There are following hardware acceleration methods and encoders Please explain me what i am doing wrong here : and here: Thanks a lot.

Hi, I've got two questions: 1. Is possible to force more power to USB port? 2. How to totally disable wifi on board (by software) to release some power consumption?

Debian GNU/Linux 9 orangepizero ttyS0 orangepizero login: root Password: Last login: Tue May 8 23:46:23 UTC 2018 on ttyS0 ___ ____ _ _____ / _ \ _ __ __ _ _ __ __ _ ___ | _ \(_) |__ /___ _ __ ___ | | | | '__/ _` | '_ \ / _` |/ _ \ | |_) | | / // _ \ '__/ _ \ | |_| | | | (_| | | | | (_| | __/ | __/| | / /| __/ | | (_) | \___/|_| \__,_|_| |_|\__, |\___| |_| |_| /____\___|_| \___/ |___/ Welcome to ARMBIAN 5.44.180506 nightly Debian GNU/Linux 9 (stretch) 4.14.39-sunxi System load: 0.08 0.17 0.08 Up time: 3 min Memory usage: 17 % of 240MB IP: 192.…

hi there my orange pi one is very slow (8 fps) at encoding my capture card stream to h264 using HW Cedrus264 but other 720p mkv files are converted fast using HW (50 fps) then i tried to save the stream first to sd card (720p Mjpeg format) then encode it using HW , but here i still have 8fps , and cpu usage is 40% even when i used SW libx264 to encode , i still get 8fps and cpu 40% wich is weird is it possible to get real time 720p encoding ? , my capture card only output mjpeg armbian xenial desktop

After running "stress" with loadavg=6 for a while, wifi is lost and CPU temp fluctuates between 50-78C, and I saw 20+ errors such as: Write-error on swap-device all related to zram but I do have 130M RAM free, other than lost wifi and those errors shown, the system still appears to running, I can ssh via wired ethernet port and poking around it.

Hi everybody! I am new to this community and I am trying to find out if anyone here with a NanoPi Neo Air board got bluetooth working on Armbian Buster (mainline based kernel 5.10.y). Here is the armbianmonitor -u log http://ix.io/2UKF For about one week I am trying to make bluetooth work and with no result. I tried also Armbian Focal (mainline based kernel 5.10.y) and the results are the same. Bluetooht not working/recognized. I mention that I enabled BT support from armbian-config. dmesg | grep blue empty result rfkill list 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no The images were compile…

Hello i cant get orange pi zero 2 hotspot working with supported image bullseye. Did anyone got it working? Thank you

fb_st7789v spi driver not getting on orangepi pc plus in 5.15 kernel in following issue SPI driver fb_st7789v has no spi_device_id for sitronix,st7789v

Hello armbian forum, I have an Orange PI Win plus with armbian desktop legacy kernel 3.10.y on it. I also have a extension board from my Raspberry 1 which I want to use. The Problem is that the extension board needs the pins 8 & 10 for UART communication. I read already that UART(2) over pin 8 & 10 is used for Bluetooth? I don't need Bluetooth and want to disable it to free up the pins. Uart1 Pin 38 & 40 and Uart3 Pin 11 & 13 are working finde. How can I make this? With overlays or editing the .dts files?

Hi, I am stuck integrating IR in my board banana pi m2 zero. Can anyone guide me to setup IR?

SND_USB_AUDIO seems now disabled in Vanilla Kernel. Probably after this commit: - https://github.com/igorpecovnik/lib/commit/70231cf8ae641650ec8601124db33b5b186a285b This should be why my USB dac doesn't work anymore after an update of the system. Is there any reason or it's only an error? I must thank you Igor for your work.

Hi, I was looking the wiki, but I didn't find if is it possible to connect a RJ45 jacket to Nano PI NEO Air. If yes, what are the pins? Best regards, Marcos Sousa

Hi everyone I'm trying to use an Orange Pi Zero but I have some troubles by using Ethernet and WiFi. First, I connect to the pi via SSH by using ethernet IP. Then, I connect to the pi via SSH by using WiFi IP. At this point, all works fine. The problem appears when I disconnect the Ethernet cable. After doing it, I also lose WiFi connexion. my cfg : Armbian v5.25 Debian jessie 3.4.113-sun8i

Hi Guys! I am experimenting with an Orange PI Zero H5 and have noticed that there is no CEC support in Armbian Is it something that is worked on and i should expect it to be present in the H5 Armbian builds anytime soon ? I have found some guides with Kernel Patches etc but i am a Linux noob and it's a nuclear physics for me atm. Anyone can clear that out for me ?

Latest kernel installed, compare attached dmesg-s. It starts working again after `reboot` invoked from serial console. dmesg-ok.log dmesg-watchdog-5.10.log

Thought this might be useful: FROM: http://www.orangepi.org/orangepibbsen/forum.php?mod=viewthread&tid=2236 01 3.3V 02 5V 03 TWI0-SDA PA12 04 5V 05 TWI0-SCK PA11 06 GND 07 PWM1 PA06 08 UART1_TX PG06 09 GND 10 UART1_RX PG07 11 UART2_RX PA01 12 SIM_CLK/PA_EINT7 PA07 13 UART2_TX PA00 14 GND 15 UART2_CTS PA03 16 TWI1-SDA PA19 17 3.3V 18 TWI1-SCK PA18 19 SPI1_MOSI PA15 …

Hi @Igor you should consider changing imagetool when you ship your image files since the Suse image tool is quite broken on Windows platforms 8 or higher since its often just gives a blank non function interface that crashes upon pressing buttons. Perhaps Rufus would be a better alternative

I have a variety of boards - an OrangePiPlus, a hummingboard, a RaspberryPi, a RaspberryPi2 that I can test - as well as a bunch of other boards that are not supported. I am an embedded linux developer so I have reasonable competence with building kernels, writing drivers, scripting .... I would be interested in helping with testing and fixing things atleast with those boards that I have available to me. But I could use some clues. Is there a developers guide to Armbian ? Something that lays out how the build process works ? Or does one just jump in ? As an example it does not appear that install-nand-state is working for either the legacy or vanila…

Hi, my new OPI zero arrived today. I downloaded and installed armbian (Armbian_5.24_Orangepizero_Debian_jessie_3.4.113) and updated everything apt-get update apt-get upgrade apt-get dist-upgrade Finally I tried to connect to my wlan (FritzBox 7390, 2,4Ghz, WPA2) via nmtui. After a while I get the message: Could not activate connection: Activation failed I tried to connect to my Smartphone via hotspot instead and that worked fine. Both networks are using WPA2 encription and other settings in both WLAN settings are looking identical... Did I miss something? I uploaded my armhwinfo log here Marcel

I think I know the answer to this but I'll ask anyways. Is there any command line software out there (e.g., VLC) that I could put onto an Armbian Server Edition version that would show a movie out on the HDMI port? I have a NanoPi M1 that has a HDMI port. But I'm assuming that without all the Desktop video driver, it isn't possible to do this on a headless server.

Hello. Is there a way of resetting the USB subsystem in Armbian for Orange Pi Zero? I don't want to unplug and plug a USB device or reboot the system just to reset the plugged USB devices. The above is doable on a PC running Ubuntu with something like this: $: cd /sys/bus/pci/drivers/ehci_hcd $: ls 0000:00:14.0 bind module new_id remove_id uevent unbind $: echo -n "0000:00:14.0" > unbind $: echo -n "0000:00:14.0" > bind Wondering if something similar (I don't really care if the solution is not similar) is doable on Armbian for OPIZ. Cheers!

Hello i have a 7 inc LCD with HDMI board, but i couldn't use the screen. I've installed armbian 5.41 desktop Linux opiwin 3.10.107-pine64 #11 SMP PREEMPT Sun Feb 11 19:22:44 CET 2018 aarch64 aarch64 aarch64 GNU/Linux my screen is like this what are the steps to work this screen orange win plus. it is working orangepi one via h3disp but a64 doesn't have this feature. and this screen resolution is 1024x600 so if i set 1024x768 the screen ratio is not correct. thanks.

Is there a kernel package with PREEMPT-RT for OrangePi PC Plus? I'm trying to get linuxcnc running - which works, but without USB. I used this guide: https://orangecnc.gitlab.io/quick-start.html. Kernel there is 5.4.18, which has the USB-not-working-bug for Orange Pi Plus.

Hello! I want to connect to the I2S the DAC PT8211. But it has an another coding format - left justified (Sony) 16 bit. I have already put a 16-bit frame in script.fex, but I can not do the LJ. On the test sine signal, the tip of the sine is turned upside down. Tell me how to change the output format of the stream from I2S to the Japaneese Left Justify? This part of my fex: [pcm0] daudio_used = 1 daudio_master = 1 daudio_select = 1 audio_format = 0 signal_inversion = 1 mclk_fs = 64 sample_resolution = 16 slot_width_select = 16 pcm_lrck_period = 16 pcm_lrckr_period = 1 msb_lsb_first = 0 sign_extend = 0 slo…

Hi, sorry for my english. I have an orange pi plus 2 and i try to turn it's wifi module on ap mode. I install hostapd et and set config lines in /etc/network/interfaces. After reboot the OPI can't finish the starting. I mean it's boot and one second after login line appear, the screen display lot of lines and it reboot again. What can be the problem? Any help? PS: The system is Ubuntu server installing on EMMC. My power supplie is 5V - 2,5 A (So i think it's not a power issu).

dear friends i used 20 Opi zero with armbian 5.38 for communicating over ttyS1 to Megatec UPS devices boards should send string on baud rate 2400 to UPS with RS232-To-TTL and get answer and work normally for the first time bur after a while serial stop transmitting data at all restart , stop-start ,... not fix problems the only way to fix the problem is connecting ttl to rs232 to pc and connect to serial with putty after that serial started send and receiving data and can use to communicate to ups devices i faced this problems on 9 of 20 boards programming language in python Thank you in advance!

Hi, I compiled the newest version of u-boot. Then I updated it at my sd card via: dd if=/dev/zero of=/dev/mmcblk0 bs=1k count=1023 seek=1 dd if=u-boot-sunxi-with-spl.bin of=/dev/mmcblk0 bs=1024 seek=8 dd if=u-boot.bin of=/dev/mmcblk0 bs=1024 seek=40 Now u-boot starts and I'll get to the message "Starting kernel ..." and nothing happens. Do I have to recompile the Kernel or did I something wrong? Edit: I did it on my NanoPi Neo2

I'm willing to dusto off my H3-based Orange PI+ 2, because of all the great work that has being done recently on kernel 4.20, 5.0, 5.1 etc to support both H3 and Mali 400/450. However, for some reason, it seems that my board (even though it's officially supported) hasn't been updated past 4.19 kernel, so all the cool things are missing. On the other hand there are some WIP/no-yet-supported Orange Pi boards that DO support 5.1 kernel, so I'm a little bit confused. Is there any roadmap for newer kernels on H3 boards?

On the Orange Pi Zero Plus the pwm1 port is available on the header instead of pwm0. Ik have tried to create a custom overlay but it does create a pwm device but it is not working. pwm1 is on PA6 I have created a folder: overlay-user in /boot In this folder I created a sun50i-h5-pwm1.dts file with the following content: /dts-v1/; /plugin/; / { compatible = "allwinner,sun50i-h5"; fragment@0 { target = <&pio>; __overlay__ { pwm1_pin: pwm1 { pins = "PA6"; function = "pwm1"; }…

Hi guys, I am new here. I bought a NanoPi Neo (H3). I am new to Armbian, but not new to Debian. The NanoHat OLED works fine with UbuntuCore 16.04 and kernel 4.14. Now I installed a new microSD card with latest Armbian Bullseye. But the NanoHat doesn't work. Armbian is up-to-date: uname -a Linux nanopineo 5.15.48-sunxi #22.05.3 SMP Wed Jun 22 07:35:10 UTC 2022 armv7l GNU/Linux cat /proc/cpuinfo processor : 0 model name : ARMv7 Processor rev 5 (v7l) BogoMIPS : 48.00 Features : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm CPU implementer : 0x41 CPU architecture: 7 CPU variant : 0x0 CPU part : 0xc…

I recently picked up an Orange Pi Zero 3 and have been trying to figure out how to get the i2c pins working on the GPIO. The pinout shows pins 2 and 3 (229 and 228 according to the orange pi version of wiringPi) being used to i2c-3. The downloadable images seem to be hodge-podge with the orange-pi-os version based on arch linux. But their instructions appears to be based on earlier orange pi models that had an Orange Pi OS based on armbian which included a 'orangepi-config' command similar to raspi-config. There is no orangepi-config in the arch-based Opi-OS. A third party image from leeboby includes a current buster version of Raspbian but while it contains raspi-co…

Hi, this is my first post, my apologies, I could not find a matching topic category for this PCduino3 nano question/issue (no built-in wifi, I use a Roccar wifi dongle) I have successfully built the image using the armbian configuration script (bookworm current), the board boots and runs teslausb, however, I am unable to install the driver for my wifi dongle. The error when starting the install-driver.sh script is "your kernel headers are not properly installed". I tried apt install linux-headers-current-sunxi and kernel-headers-armmp, they install successfully but I still get the same error about the kernet headers not being properly installed. Th…

Hi, I would like to make my opi plus in AP mode (standalone). I know the img is shipped with hostapd and interface.hostapd ready but is in bridge mode. I am able to use it in bridge mode but i need it to be standalone. How can i set it to just standalone? I tried install dnsmasq and disable the br0 but i think i did something wrong and the board cant be connected. Cheers

Hi, I am using blinkt on win plus, but seems like there are no python GPIO library suits it. Anybody have an idea?

Hello, I have a problem with communicating with SPI device, namely accelerometer ADXL345 I quadripple checked connection and it seems to be fine, device shows in /dev/spidev0.0 I have also tested shorting miso and mosi and testing with spidev_test, here is the result: spi mode: 0x0 bits per word: 8 max speed: 500000 Hz (500 KHz) TX | FF FF FF FF FF FF 40 00 00 00 00 95 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF F0 0D | ......@....�..................�. RX | 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | ................................ My ArmbianEn…

if use: mpv --vo=vdpau --hwdec=vdpau --hwdec-codecs=all --fs --loop=yes /media/usb/*.mp4 hardware decoding work if use mplayer mplayer -stop-xscreensaver -ontop -quiet -fs -vo vdpau -vc ffmpeg12vdpau,ffh264vdpau, -loop 0 /media/usb/*.mp4 hardware decoding not work Howto use mplayer with hardware decoding videoplaying on Orange PI PC v1.2?

Hi. I want to build a full RT legacy kernel using RT patch 30-real-time143-full-plus-rt-fixes.patch (option 5) for my Orange Pi One. While building I got the error at this line /sun8i/security/apparmor/sid.c#L28 static DEFINE_SPINLOCK(sid_lock); security/apparmor/sid.c:28:28: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘__cacheline_aligned_in_smp’ static DEFINE_SPINLOCK(sid_lock); ^ As seen in the patch file, top line's macro must be translated to static spinlock_t sid_lock __cacheline_aligned_in_smp = __SPIN_LOCK_UNLOCKED(sid_lock); ^ But at this moment I got the er…

I'm not sure if this is a bug that needs to be reported and I don't know what issues it may be causing, if any. ----< CUT >---- Sep 16 08:55:56 loki kernel: [35972.411737] ieee80211 phy2: brcmf_fweh_event_worker: event handler failed (72) Sep 16 08:55:56 loki kernel: [35972.465736] ieee80211 phy2: brcmf_fweh_call_event_handler: no interface object Sep 16 08:55:56 loki kernel: [35972.465781] ieee80211 phy2: brcmf_fweh_event_worker: event handler failed (72) Sep 16 08:55:56 loki kernel: [35972.471791] ieee80211 phy2: brcmf_fweh_call_event_handler: no interface object Sep 16 08:55:56 loki kernel: [35972.471838] ieee80211 phy2: brcmf_fweh_event_worker: eve…

I am getting a quite loud audio spike / noise sound at the end of an audio play in python when using the following script: https://gist.github.com/bbence84/04d1935a92a4b4ab3d44bf182ea4bcc1 Wav to be played, but it does it with any other wav or mp3 file: https://easyupload.io/vbat12 It uses the speech_recognition package and the preferredsoundplayer package, but also the VLC python package shows the same when playing the audio. When changing the audio play to be non-blocking for the python script, the issue goes away... Very strange. This is driviging me nuts. I'm on Armbian 22.11.1 Jammy / 22.04.1 LTS, kernel 5.15.80-su…

Maybe there has been a glitch in the update release process? I performed a sudo apt update && sudo apt upgrade and this has pulled down an automated build. Should it had pulled down a supported build instead?

https://www.armbian.com/olimex-lime-2/ Does the image come with and install non free software on the computer? If so is there documentation showing how to do a fully free software installation of the Armbian_community_25.11.0-trunk.546_Lime2_trixie_current_6.12.58_minimal.img image? Free software is software you can use, share, modify and redistribute. Thank you.

Hi, today I want to tell you, that I am very much upset about the result of the latest ARMBIAN Update! After updating I figured out, that the latest update erased my bash.bashrc.custom, which took me a long time to set it right! Unfortunate I did not have a backup! I am very much upset, that an armbian update erases configuration files WITHOUT any further notices!!! Regards, Ireng

the new version of Armbian (5.83) Does not boot from sd card I tried to install 5.69 it's work normally. I tried to all the sd card formatter rufus and wın32 disk imager and different sd cards but no way new version does not work anyway. when i burn to 5.69 it boot normally. I guess you have to control the package whıch you upladed for opi pc+ thanks

I've noticed some other threads about Banana Pi builds not booting. I tried the 6.12v built on Jun 19 and that's when my device stopped booting. It won't even power on. I suspect the firmware update is corrupting the MicroSD card. I originally had an older build running and ran an update/upgrade and my system wouldn't boot (won't power on) after that. I purchased a new MicroSD card, and my system booted with an older build. Not realizing my MicroSD would get corrupted, I tried updating/upgrading again and I'm back to not booting. I don't have enough MicroSD cards to pinpoint the exact package. My working build is from 6.6.17, 24.5.0-trunk.58. It appear…

Hi, I'm using Cubieboard-2 Armbian_4.2_Cubieboard2_Debian_wheezy_3.4.108. The problem is that there is no Line in device, my test with arecord: I have no idea on how to activate the Line in configuration. Do I need to enable it in .fex script? Or there is no hardware support? Can anyone help me? Thanks

Hello After trying (unsuccessfully) several linux distributions on an orange pi plus 2e, I was happy to find the jessie desktop, which accepts wireless keybord and wifi or ethernet connection with no need of further command line. The only problem: no sound. Could somebody help with that?

Is possible with the last version of Debian to have internal Wi-Fi and Ethernet working simultaneously on Banana PRO? I want to try some "bonding" network benchmarks. Thanks.

Just saw this mentioned on Orange Pi forum and had not heard of it, from name nanopi m1 I assumed it was a version of Banana Pi but on looking this and other boards are made by Friendlyarm. Wonder if armbian will get ported over ? Shame these companies don't cover armbians cost to do so . http://www.friendlyarm.com/index.php?route=product/product&path=69&product_id=109 Also other SOC boards they make, all good for customer and more Single board computer competition. http://www.friendlyarm.com/index.php?route=product/category&path=69

Hy everyone, I am trying to get armbian running on my bananapi. The problem is if i write the raw file to the sdcard (following the instructions) no boot partition is created. The bananapi does panic while booting and restarts after a few seconds... Any ideas? Thanks!

orange pi one H3 idles somewhat warm in part due to a power regulator that switches only between 1.1 and 1.3 v. orange pi pc could idle at pretty low temperatures (closer to room without a heat sink due to a better power regulator as well), and the h3 runs rather hot say > 70deg C when under loads the trouble is the SOC die is 14x14mm, and if one wants to use a large heat sink, it wouldn't fit and you would need to use the copper shim method, to provide some clearance to fit a large heat sink that is troublesome and hence , i made do and made an attempt to try out *small* heat sinks, e.g. https://www.aliexpress.com/item/10pcs-Computer-Cooler-Rad…

Hello I have a problem with the configuration of the PMU and the temperature . All information that I have found so far for the kernel 3.4 . However, I use 4.4.3 . I am using SSH Login me in the Cubietruck then be at the beginning all temperatures displayed correctly .where I find this script ? thanks for your help

Hello, I am looking for the old version of Armbian_5.30_Orangepipcplus_Ubuntu_xenial_default_3.4.113 Have checked the archive server here: https://imola.armbian.com/archive/orangepipcplus/archive/ but no luck There are old link found https://dl.armbian.com/orangepipcplus/archive/Armbian_5.30_Orangepipcplus_Ubuntu_xenial_default_3.4.113.7z but has been "404 Not Found" Hope that someone still archived this version, please upload to a cloud server i just want to download it for my project Thanks in advance

I have an Orange Pi Plus 2 that was running Armbian off of its onboard eMMC module, but I think I may have damaged it while working with the GPIO pins as it now will no longer boot from the module. The board will boot and run OK off of an SD card, but I'd like to copy the OS back to the eMMC module if possible. I've tried to rerun the script 'nand-sata-install', but I receive the error 'There are no targets. Please check your drives'. If I list the mmc devices I just get one, which I presume is the SD card: > ls -l /dev/ | grep mmcblk brw-rw---- 1 root disk 179, 0 Mar 20 16:51 mmcblk0 brw-rw---- 1 root disk 1…

I'm on an Orange Pi One with a fresh install of Armbian 5.38. I've installed build-essential and linux-headers-sun8i but not having any luck. I've also got the newest make version (4.1-9.1). Could someone point me in the right direction? EDIT: I've also attempted to use armbian-config to add headers but that hasn't seemed to work either

Greetings, I'm not good with linux so excuse any stupidity i might say. I have been using Xenial for years now and just decided to update. In the past i was using the sunxi module to access gpio's For ex: echo 1 > /sys/class/gpio_sw/PA7/data Now in Bionic i just noticed gpio's are not accessed in the same way. According to this user, we can either use sysFS (which seems deprecated) or libgpiod. The problem is that i can't make it work. libgpiod: root@orangepi:~# gpioset gpiochip0 29=1 gpioset: error setting the GPIO line values: Unknown error 517 sysFS: root@orangepi:~# echo "29" >/sys/class/gpio/export -bash: echo…

Hi all, I've purchased a second hand banana pi M1 board with an BPI 7 inch LC connected on prarallel RGB. The board and the LCD is working with last bananian distribution and https://github.com/BPI-SINOVOIP/BPI-M1-M1Plus-Configuration/blob/master/fex/BPI_M1_7lcd.fex. I'm trying to make both working with Armbian but I'm lost. I don't find the script.bin, /boot/script.bin or anywhere. And no idea how to set /boot/armbianEnv.txt for the LCD. The kernel have been rebuilded using this topic. Any help will be apreciate. Regards Hugues

Hello, I'm trying to connect a serial device on my nanopi neo plus2, but the gpio uart seems to be disable, please can you help me step by step? I found some things on forums but I understand nothing .... Thank you in advance

Hello .. I have tested both current release 24.2.1 (jammy and bookworm) on OPiZero, and usb otg not working .. on both .. Kernel is 6.6.20-current-sunxi module g_serial is loaded ttyGS0 exist serial-getty@ttyGS0.service is runing dtc overlays are usbhost0 - 3 ..all looks good on opizero side ... but on "computer side" not.. nothing happened when usb cable is plugged in .. no ttyAMC0 device was created .. no new usb hardware can be found in system log ... ..nothing.. Buster version works well... (my old installation) any advice ..? or it is any "actual kern…

Hi, the Armbian_community_24.5.0-trunk.563_Bananapi_jammy_current_6.6.30_xfce_desktop.img shows black screen after going to the desktop GUI (the LCD panel shows "no signal").. PS: The Armbian_23.11.1_Bananapi_jammy_current_6.1.63_xfce_desktop.img after an update/upgrade shows black screen after going to the desktop GUI (the LCD panel shows "no signal") as well.. The Armbian_22.11.0-trunk_Bananapi_bullseye_edge_5.19.6_xfce_desktop.img Armbian_23.8.2_Bananapi_jammy_current_6.1.51_xfce_desktop.img Armbian_23.11.1_Bananapi_jammy_current_6.1.63_xfce_desktop.img work.

I just tried my Orange Pi PC with a Samsung TV connected via the HDMI port. I'm able to log in to the desktop OK, but when screen updates happen (e.g. when I scroll around in the web browser) the display goes black momentarily, then comes back after a fraction of a second. This seems to be worse for some applications (e.g. the web browser) than others (e.g. terminal), and so far I haven't seen it while not running X. Also, playing videos (with mpv) does not cause it. I'm running this image with no customisations: http://image.armbian.com/Armbian_5.20_Orangepipc_Debian_jessie_3.4.112_desktop.7z Any ideas how to fix this?

Hello everyone. I'm experiencing some strange issue with my cubieboard and its connection to the internet. I boot it up and it works correctly, but after a day or two, I can't communicate with it using a ssh program, or vnc viewer. My other two servers that uses Linux Mint is working normally, so I think the problem is not my router. (I even swapped the Ethernet cables between my servers). If I connect a display on my cubieboard and try to ping my Windows computer, then I'm able to ssh my cubieboard using my computer. Sometimes I'm unable to connect to my cubieboard via ssh using my windows and my Android phone, but if I try using my Linux machine, I can connect with…

Hy When I do a Speedtest-cli with my Bananapi m1, I have 320mo for Download and 180mo for Upload. When I do with my Laptop I have 700mo for Download and 180mo for Upload. My os is Armbian. I have also a Bananapi M64 and with her I have the same results than my Laptop. Some one has an Idea? Thanks

Good day, Is there a manual how to do that with the latest Armbian versions? Since my SBC have internal NAND and SSD installed, but still need a SD card to boot fom it?

Hello, I just installed the incredible Armbian on my OrangePiPlus. I can't find the EMMC Boot script nan-sata-install. Has something changed in the past I didn't noticed? with regards

Hello everyone, I am new to the world of Orange Pi 3 LTS 1.4 and Armbian. I have very recently installed this os on my Orange, it turns out to work almost everything correctly except Wifi and bluetooth. It is really important for me to get Wifi working for various projects I have in mind and I find armbian very reliable and supported. When I try to connect the Network Manager interface returns: On the net I found various discussions about this but no real solution. Does this happen to you as well? It seems not to recognize the wifi chip. Below is the armbianmonitor: https://paste.armbian.com/iteheqokov …

I put the log of the console... I can compile a linux 4.11 and ubuntu 16.04.3 server with the packet from ARMBIAN... thats greats... but i had to correct some files to compile OK!!! Ubuntu 16.04.3 LTS bananapim2ultra ttyS0 bananapim2ultra login: root Password: Last login: Mon Nov 13 20:47:13 UTC 2017 on ttyS0 ____ ____ _ __ __ ____ _ _ _ _ | __ ) __ _ _ __ __ _ _ __ __ _ | _ \(_) | \/ |___ \ | | | | | |_ | _ \ / _` | '_ \ / _` | '_ \ / _` | | |_) | | | |\/| | __) | | | | | | __| | |_) | (_| | | | | (_| | | | | (_| | | __/| | | | | |/ __/ | |_| | | |_ |____/ \__,_|_| |_|\__,_|_| |_|\…

today I made an update an got the following message The following packages will be upgraded: hostapd linux-image-sun8i linux-jessie-root-orangepione linux-libc-dev linux-u-boot-orangepione-default sunxi-tools 6 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. Need to get 13,9 MB/15,0 MB of archives. After this operation, 2.048 B of additional disk space will be used. Get:1 http://beta.armbian.com/ jessie/jessie-utils hostapd armhf 2:2.6-4~armbian5.37.180112+1 [363 kB] Get:2 http://beta.armbian.com/ jessie/main linux-image-sun8i armhf 5.37.180112 [12,9 MB] Get:3 http://beta.armbian.com/ jessie/main linux-jessie-root-orangepione armhf 5.37.180112 [485 kB] …

Board NEO2 with Armbian Stretch mainline kernel 4.19.y many errors: info:xxxxx[3087]::2019-01-30T10:19:10.607956+00:00: /usr/sbin/xxxxx: error while loading shared libraries: libsystemd.so.0: cannot open shared object file: No such file or directory info:xxxxx[3093]::2019-01-30T10:19:20.857869+00:00: /usr/sbin/xxxxx: error while loading shared libraries: libsystemd.so.0: cannot open shared object file: No such file or directory info:xxxxx[3097]::2019-01-30T10:19:31.114980+00:00: /usr/sbin/xxxxx: error while loading shared libraries: libsystemd.so.0: cannot open shared object file: No such file or directory info:xxxxx[3106]::2019-01-30T10:19:41.3579…

Hi, I have "orange pi 3" and I want to migrate "Debian Buster" from "SD" card to eMMC. I run this command sudo nand-sata-install And I only get this! see link https://ibb.co/wQz0jx4 As you can see there is no item "Boot from eMMC - system on eMMC" What am I doing wrong? PS - Armbian Buster downloaded from https://www.armbian.com/orange-pi-3/

I compiled an environment for an Orange Pi zero using CSC, Edge , Jammy, console server, standard. I didn't change any of the defaults. Things works except for the OrangePi expansion card with dual USB ports. The expansion card USB ports are not recognized. Anyone know what I need to select to get the expansion board working?

Hello, I am going to buy this unit, becuase I am lookig for a cheap board with bluetooth and camera input included. NanoPi Neo Air seems to be the best choice (and the only - talking about cheap board). Anyway, did someone play with its bluetooth interface programming? I mean sending (mainly, but also recieving files) from NanoPi by bluetoot. Are there any working tools (C, python)? Thanks for any post in advance!

I'm trying to boot from exp. flash from site (Armbian Stretch mainline kernel 4.19.y), board couldn't boot (LOG): U-Boot SPL 2018.03-armbian (Jun 11 2018 - 03:52:30 +0000) DRAM: 2048 MiB Trying to boot from MMC1 NOTICE: BL3-1: Running on A64/H64 (1689) in SRAM A2 (@0x44000) NOTICE: Configuring SPC Controller NOTICE: BL3-1: v1.0(debug):c9f55c0 NOTICE: BL3-1: Built : 03:52:19, Jun 11 2018 NOTICE: DT: sun50i-a64-orangepi-win INFO: Configuring AXP PMIC INFO: PMIC: DRAM voltage: 1.50V INFO U-Boot SPL 2018.03-armbian (Jun 11 2018 - 03:52:30 +0000) DRAM: 2048 MiB Trying to boot from MMC1 NOTICE: BL3-1: Running on A64/H64 (1689) in SRA…

i wanted to use my Banana Pi M1 for displaying multimedia content from websites like twitch.tv but firefox-esr and chromium crash when I try to load them. firefox opens its crash report box without a possibility to look at the related error messages. But the output of chromium can be viewed here: http://dpaste.com/37M0QNC It was installed from Armbian_5.65_Bananapi_Debian_stretch_next_4.14.78.img plus dist-upgrades. Iinitius

Hi, I'm working with mpd on armbian 20.02.0 with i2s device and found some problem: periodically sound is interrupted. I enable verbose logging in mpd and I get message: May 20 04:36 : alsa_output: Underrun on ALSA device "hw:0,0" May 20 04:36 : alsa_output: Underrun on ALSA device "hw:0,0" May 20 04:37 : alsa_output: Underrun on ALSA device "hw:0,0" This is not permanent and some time maybe work fine, but if it starts, messages go with an interval of 10-11 seconds until I restart mpd. I rebuilt armbian with enabled ALSA debug options CONFIG_SND_PCM_XRUN_DEBUG, CONFIG_SND_VERBOSE_PROCFS, CONFIG_SND_DEBUG and try again. This is result with my i…

Hello I need to connect my modem Huawei E3372-325 to my NanoPI but when i write command ls usb get it root@PC_42:~# lsusb Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 002: ID 3566:2001 Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub…

Hi friends, I am using armbian on orangepi lite and it is brilliant! My orange pi zero is on the way. One question - sometimes I want to make wifi AP from my armbian and sometimes I want armbian to be wifi client. Now it connects successfully to my wifi as a client. I am looking for terminal commands to switch between modes (AP vs. client) on the fly. Any ideas how to do it? Ideally I would like to run two commands: - one command to act as wifi AP (with specified wifi name, password, etc.) - second command to act as wifi client (to connect to specific network with password, etc.) Any idea how to do it, please? P.S. LAN port (on orange pi zero) should always…

Dear all, I am not able to find and enable SPI in orange pi zero+ (allwinner H5).I did as per many suggestion on many forum but didn't work and not showing active. Please give me concrete help.

Hi, I use my cubietruck with xenial desktop and mopidy. I installed successfully mopidy with mopidy's repository I tested only with alsa then with pulse. results : no sound and error on service mopidy status. pulse work well with mpv. Can you help me?

Hi I have nano pi m1 with armbian installed. When I play video on firefox, it shows but the sound is too choppy like sea waves and I don't hear the real sound. what should I do to fix it?

I can't seem to get the Orange Pi Zero working as a USB gadget (libcomposite) to emulate a keyboard. Here's the script I'm using to test: #!/bin/bash cd /sys/kernel/config/usb_gadget mkdir g1 cd g1 echo "0x1d6b" > idVendor echo "0x0104" > idProduct mkdir strings/0x409 echo "1234567890" > strings/0x409/serialnumber echo "0x1d6b" > strings/0x409/manufacturer echo "0x0104" > strings/0x409/product mkdir functions/hid.usb0 echo 1 > functions/hid.usb0/protocol echo 1 > functions/hid.usb0/subclass echo 8 > functions/hid.usb0/report_length /bin/echo -ne \\x05\\x01\\x09\\x06\\xa1\\x01\\x05\\x07\\x19\\xe0\\x29\\xe7\\x15\\x00\\x25\\x01\\x75\\x01\\x95\\x08…

Hello everyone, First of all, I'm sorry for my English. I'll do my best. Currently armbian is installed in the mmc (although I tried the same test with a sd memory). Now, with lscpu I can see that only cpu0 is enabled; 1-3 are off. When I try: sudo echo '1' | Sudo tee / sys / devices / system / cpu / cpu1 / online to activate cpu1, shell replies with: online: Permission denied I'm looking for options on root permissions or sysfs mount options; For now, I can not find a solution. Thanks in advance for your help.

Hey Does this display http://www.ebay.com/itm/192163706724?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT Work with the orange pi zero?

(jessie 3.4.112-sun8i) sudo apt-get install idle idle-python2.7.9 gives me an error E:Unable to locate package idle-python2.7.9. E:Couldn'n find any package by regex 'idle-python2.7.9' What am I doing wrong?

Hi, I have Orange Pi Zero based on H2+ which is failed to boot Armbian_5.34_Orangepizero_Ubuntu_xenial_next_4.13.8.img Symptoms: Green power light is always on, red led next to it does not flash at all. Ethernet lights are off. I am using proper power supply and Sandisk A1 16Gb Class 10 micro sd-card. Connecting UART-USB adapter based on CP2102x to UART port next to Ethernet ports shows nothing. Exactly same setup, same hardware, no changes on connections/setup boots "Armbian_5.30_Orangepizero_Ubuntu_xenial_default_3.4.113.img" image without any problems. UART works fine. Any ideas how I can help to test newer image?

Hello to everyone! I am trying to configure dual boot using u-boot. But I've got some misunderstandings, maybe someone will help me with that problem. When I'm booting from SD card everything works fine: rootdev=/dev/mmcblk0p1 (armbianEnv.txt) or rootdev=UUID=XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX in both cases. When I'm booting form eMMC something goes wrong: I can not set rootdev=/dev/mmcblk1p1 cause in this case I've only error message: But if I'm setting as rootdev=UUID=XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX everything works fine. Maybe it is bad way to use /dev/..., but I need it. So, I tried a lot …

Hi, I guess this question depends on knowing the OPi Lite hardware reset button capabilities before being able to answer the following question. but here goes: Does anyone know if the OPi Lite button can be scripted/coded to not only execute a shutdown or reboot command but to do both? So, say, a single short press would gracefully reboot the OS while a long press (hold for, say, 4 seconds) would perform a shutdown? Thanks!

First of all, thanks for great Armbian, works great... When will be a release; Ubuntu 16.04 (Xenial) for BPIM1+ ?

Hi I am very new to computers. I have a raspberry pi 3 and just bought a orange pi one. My problem is I am unable to download an operating system to my working raspberry to burn to an sd card to be able to use the orange because the raspberry doesn't have enough space on my memory card. Do any of you know a company or person that could sell me an o/s that is already on a card for the orange, I have been hunting for ages for a site that sells something like noops for the raspberry. I have read that armbian edge might be the right choice if i can get it. Any help appreciated.

Has anyone had any success with installing numpy on the NanoPi Neo Air? Installing via pip install numpy -v it hangs at these same lines every time: arm-linux-gnueabihf-gcc: numpy/linalg/lapack_litemodule.c arm-linux-gnueabihf-gcc: numpy/linalg/lapack_lite/python_xerbla.c arm-linux-gnueabihf-gcc: numpy/linalg/lapack_lite/f2c_z_lapack.c arm-linux-gnueabihf-gcc: numpy/linalg/lapack_lite/f2c_c_lapack.c arm-linux-gnueabihf-gcc: numpy/linalg/lapack_lite/f2c_d_lapack.c arm-linux-gnueabihf-gcc: numpy/linalg/lapack_lite/f2c_s_lapack.c I am unable to get a response from the serial terminal or ssh into the device whilst it hangs here. I'm cu…

Armbian Bionic mainline based kernel 5.3.y Server or light desktop usage scenarios. High level of software maturity NOTE: the download link is broken 404 Not Found nginx/1.14.0 (Ubuntu) Thanks a lot

Hi, I've managed to install Armbian_20.05.2_Orangepiplus2e_focal_current_5.4.43_desktop on my board. Now I'd like to get decent web-browsing performance (i.e. 1080 videos on a browser) and I've tried installing the mali drivers with no luck. Is there an updated guide that works with the latest version of armbian? Thanks in advance

Hello, long time Banana Pi user here. I have a BPI-M2+ and recently decided to write Armbian_23.02.2_Bananapim2plus_bullseye_current_5.15.93_minimal.img to emmc. I am using cat6 over gigabit LAN and am seeing scp and rsync transfers to the device averaging 1.7mb/s. Transfering an 850mb file took unusually several minutes. It starts off at 40mb/s then quickly drops to under 2mb/s. Is this typical? I would think over LAN I would be seeing much faster speeds. Untarring this same 850mb archive also took unusually long. Could the emmc be damaged or on it's way out? How would I check? Please see armbianmonitor output. https://pastebin.com/RCa…