Allwinner sunxi

Hello, In the following environments of Cubietruck, a problem which the CPU core is not recognized only one has occurred. $ hostnamectl Static hostname: dns02.kometch.local Icon name: computer Chassis: n/a Machine ID: 609e2bf4c5884368b36018d67982759e Boot ID: 4faccf729c4042fc87013cb82494b486 Operating System: Debian GNU/Linux 8 (jessie) Kernel: Linux 4.1.6-sunxi Architecture: arm $ cat /proc/cpuinfo processor : 0 model name : ARMv7 Processor rev 4 (v7l) BogoMIPS : 16.42 Features : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm CPU implementer…

I know that the ILI9341 lcd are supported natively by armbian... But, now that i have received the lcd ordered some time ago: http://www.ebay.com/itm/311058563993 I'm trying to guess how i'm supposed to wire it to the cubietruck headers. Which are the pin numbers originally assigned to work with this lcd? Which are the correct options to load fbtft? I have digged around a little bit, but i can't find any working example.

hello everyone ! How to get totally permission in /root folder of my orangepiplus2 under armbian? I have already set sudo su ----pass ok I'm installing WiringOP and I have to go inside /root Using psw I know the path that is /root/WiringOP Then I type chmod +x /.build and then /.build but I don't have permission . Opening the file system I see the "X" over the root folder Could I have the totally control of armbian ? Thanks !

Hi, I tried the instruction provided on topic http://forum.armbian.com/index.php/topic/1526-armbian-in-read-only-mode/?hl=overlayfs#entry11877 but I received kernel panic and the system doesn't boot any more. I mount the SD card on my laptop, I comment the line overlayroot="tmpfs" in /etc/overlayroot.conf and the system boot again. The package apt-get install overlayroot is not available. In installed it manualy from http://packages.ubuntu.com/en/xenial/overlayroot When I installed the package cryptsetup it return un error that cannot determine the root partition from /etc/fstab Please be so kind and write step by step instructions howto make the root file s…

Hello dear mates, first I want to thank zador.blood.stained for helping out with recompiling the DTB for A20 so we can enable PWM on Armbian. Link to his post :https://forum.armbian.com/index.php/topic/1817-using-pwm-without-rebuilding-kernel/ Now I'm seeking your help with this problem, after I added this code to the A20.dts file (I'm on a PCduino3 nano) &pwm { pinctrl-names = "default"; pinctrl-0 = <&pwm0_pins_a>, <&pwm1_pins_a>; status = "okay"; }; I'm able to compile the .dtb file, and after booting I can see the pwmchip0 on /sys/class/pwm. I can change the values for Polarity, Period, Duty_Cycle, Enable. The problem is, when I…

Hello, I'm using OPI Lite with 5.25 armbian and there is a little problem with the permissions: root@orangepilite:~/Raws/libjpeg/jpeg-8c# ./configure -bash: ./configure: Permission denied root@orangepilite:~/Raws/libjpeg/jpeg-8c# sudo ./configure sudo: ./configure: command not found root@orangepilite:~/Raws/libjpeg/jpeg-8c# ls | grep configure configure configure.ac That appeared to me twice, first time i compile and install nodejs and npm was not recognized like a command (ask for permissions after use sudo just said command not found), this is my second hit to that problem, trying to compile libjpeg. I try to gi to root owners for that folder, same results, I tr…

Hello all I want to control some GPIO pins on my NanoPi Neo (H3) board and installed WiringNP. Executing commands results in the error piBoardRev: Unable to determine board revision from /proc/cpuinfo I've traced the source of the error down to this line, where WiringNP tries to open /sys/class/sunxi_info/sys_info to determine which board it is running on. This path is not present in my Armbian os. I'm using 4.11.12-sun8i #20 SMP armv7l armv7l armv7l GNU/Linux Am I missing something here? Or are there alternatives to using WiringNP?

I have installed the latest stable Ubuntu desktop Legacy on BPI M1. The OS boot directly into the GUI. I am planning to use xrdp to remote desktop into OS from windows machine on same network. So I think it will be a good idea that BPI to boot directly into console to save some memory. If I need GUI then I can remotely connect from a windows machine. Is it a good approach? If yes, then how to configure to boot into console with minimum memory footprint.

i have an Orange Pi Zero. I add a simple Soundcard with sound in to the USB. I want to stream the sound comes from the AudioIn (usb) in to my local Wlan. What do i need? Is it possible with icecast2, darkice and Pulseaudio like in this Tutorial: https://michaelfranzl.com/2013/11/25/audio-streaming/ ?? or there other ways? thank you for help.

Hi, I recently read from github testings of orange pi lite2 testing that wireless is working. But I download from the official website of https://dl.armbian.com/orangepilite2/Debian_stretch_dev_nightly.7z(built 0824) and burn it, it starts, but the wireless is missing. I also read that the firmware added ap6255 wireless driver, so I download https://beta.armbian.com/pool/main/a/armbian-firmware-full/armbian-firmware-full_5.59.180915_all.deb and installed it. After reboot, the wireless is still missing. So the support of wireless is built-in or usb? Should I build armbian myself with the lastest code to support the built-in wireless? Thank you.

I installed ARMBIAN in a cubieboard2, then i insert a microSD card with 3 partitions and 1 of them cant be accesed directly from desktop... i receive the msg PERMISION DENIED. please i need help in that partition there is a program that i need to transfer to ARMBIAN to make my ARMIGA SYSTEM live again. How can i access it ?

Hello, a few months ago I wrote a tutorial to enable the 7" touch display for Banan Pi and Banana Pi Pro. Unfortunately the files (*.dts e.g. sun7i-a20-bananapro.dts) have changed and I don't know how to integrate the patches in the current armbian version. Does anybody know how to do it? Is there already a overlay to enable it? Thanks. Steffen

Hello, I have spend a lot of time trying to make it work I2C PL0/PL1 of orangepi zero plus 2 H5. I change sunxi-h3-h5.dtsi to status="okay" and i can not to see i2c PL0/PL1 only I can see others i2c. Can anybody help me to understand what I am doing bad? Spoiler r_i2c: i2c@1f02400 { compatible = "allwinner,sun6i-a31-i2c"; reg = <0x01f02400 0x400>; interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&r_i2c_pins>; clocks = <&r_ccu CLK_APB0_I2C>; resets = <&r_ccu RST_APB0_I2C&g…

Hi folks, I'd like to build a simple rs485 interface onto an A20-OLinuxino-Micro board. Therefore I was looking into utilizing one of the UARTs (6 or 7) on EXT1 or EXT2, add an external driver chip to it and 'fork' the according kernel module to implement support for switching send/receive with the RTS line. While that seemed to be an easy approach, I already got stuck with the basics. :-( dmesg shows me [ 2.822776] printk: console [ttyS0] disabled [ 2.842962] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 53, base_baud = 1500000) is a U6_16550A [ 2.843045] printk: console [ttyS0] enabled [ 2.866650] 1c29800.serial: t…

I have a NanoPi Neo and I'm currently looking to find out if the I2S pins can be set up as basic GPIOs? I can't find their names, (i.e. PA17) so not sure where to even begin with regards to tinkering the kernel. Any help appreciated! http://wiki.friendlyarm.com/wiki/images/c/c4/NEO_pinout-02.jpg

Hi form germany, i have problemes with my M1. The system hangs and only ping is working here the last timestamps: do, 14.04. 18:00 so, 01.05. 2:45 do, 05.05. 3:00 mo, 09.05. 15:22 i use Armbian 22.02.1 Focal with Linux 5.15.25-sunxi homeassistant + portainer (docker) mosquitto samba with sata 500gb ssd do we need some other logs? thanks to this nice work 🙂

Hello. Can't run x11 on Debian 11. I am using Nano Pi AIR (Allwiner h3). Since the board is not officially supported, I built the image on debian 11 myself. root@nanopiair:/# uname -a Linux nanopiair 5.15.44-sunxi #trunk SMP Wed Jun 8 08:41:04 UTC 2022 armv7l GNU/Linux The LCD is connected via SPI, chip is ili9486. Device tree file has been created, I can see the loading process and the console on the screen. I'm trying to start the X-server by "startx" from ssh session, but for some reason it ends immediately after the start. I tried using fbdev or fbturbo as driver. I also tried to remove the config with the driver in general (section "Devi…

Hello .. I have tested both current release 24.2.1 (jammy and bookworm) on OPiZero, and usb otg not working .. on both .. Kernel is 6.6.20-current-sunxi module g_serial is loaded ttyGS0 exist serial-getty@ttyGS0.service is runing dtc overlays are usbhost0 - 3 ..all looks good on opizero side ... but on "computer side" not.. nothing happened when usb cable is plugged in .. no ttyAMC0 device was created .. no new usb hardware can be found in system log ... ..nothing.. Buster version works well... (my old installation) any advice ..? or it is any "actual kern…

Hello again... How can I activate the wifi network? I have a nanopi neo plus 2 with wifi, but armbian don't find it. Ifconfig and nmtui don't find the wireless connection. Thank you

Hi, the Armbian_community_24.5.0-trunk.563_Bananapi_jammy_current_6.6.30_xfce_desktop.img shows black screen after going to the desktop GUI (the LCD panel shows "no signal").. PS: The Armbian_23.11.1_Bananapi_jammy_current_6.1.63_xfce_desktop.img after an update/upgrade shows black screen after going to the desktop GUI (the LCD panel shows "no signal") as well.. The Armbian_22.11.0-trunk_Bananapi_bullseye_edge_5.19.6_xfce_desktop.img Armbian_23.8.2_Bananapi_jammy_current_6.1.51_xfce_desktop.img Armbian_23.11.1_Bananapi_jammy_current_6.1.63_xfce_desktop.img work.

Hello, i have a Banana Pro and i want to switch to Armbian from Bananian. Only to write the image to the sdcard does not work. It don't boot (no green LED, no access with ssh). Is there a problem with the bananian u-boot? To change the u-boot with the lemaker script to default does not work, there is an error (https://github.com/LeMaker/scripts). Can somebody help me? Michael

Hi, I'm trying use USB Audio card it's works fine in this cammand aplay -D hw:2,0 test.wav hardware Orange pi one version Armbian 5.11 root@orangepione:~# aplay -l **** List of PLAYBACK Hardware Devices **** card 0: audiocodec [audiocodec], device 0: SUNXI-CODEC sndcodec-0 [] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: sndhdmi [sndhdmi], device 0: SUNXI-HDMIAUDIO sndhdmi-0 [] Subdevices: 1/1 Subdevice #0: subdevice #0 card 2: Audio [USB Audio], device 0: USB Audio [USB Audio] Subdevices: 1/1 Subdevice #0: subdevice #0 use portaudio library and get this error root@orangepione:~/portaudio/bin# ./paex_sine PortAudio Test: output sine wave. SR…

Hello All, m new to this forum and new to armbian. Probably someone can help me. Im trying to get an 64GB flash drive working on a Opi+ 2E. Using the eMMC storage for boot and the flash drive as "the hard disk". nand-sata-install gives me the option to install this combo but at the end the system boots in an infinite loop telling me something is missing on the USB drive. Installing to boot / root eMMC works like a charm. I mounted the USB on another linux system and the drive looks good. ext4 and a root filesystem as expected. Am i missing something? How to get the eMMC boot, USB root option up and running? OS: Armbian 5.20 (jessie server), updated / up…

I just tried my Orange Pi PC with a Samsung TV connected via the HDMI port. I'm able to log in to the desktop OK, but when screen updates happen (e.g. when I scroll around in the web browser) the display goes black momentarily, then comes back after a fraction of a second. This seems to be worse for some applications (e.g. the web browser) than others (e.g. terminal), and so far I haven't seen it while not running X. Also, playing videos (with mpv) does not cause it. I'm running this image with no customisations: http://image.armbian.com/Armbian_5.20_Orangepipc_Debian_jessie_3.4.112_desktop.7z Any ideas how to fix this?

Hi there, Recently you helped me to setup a WiFI AP on Armbian and a bananapim2p board: https://forum.armbian.com/index.php/topic/2395-access-point-mode-with-ap6212-on-armbian-521/ The current problem I am facing: the dhd module on armbian 5.25 does not on my bananapim2p boards. To be precise: I have one bananapi m2p where the dhd module loads perfectly on armbian 5.25, I created an image of this board's emmc and flashed the emmc of two different m2p boards. The dhd config file looks like: cat /etc/modprobe.d$ cat /etc/modprobe.d/dhd.conf options dhd op_mode=2 firmware_path=/lib/firmware/ap6212/fw_bcm43438a0_apsta.bin With the modprobe configuration the m2p board…

Hello, when I am using unionfs on RPi, in /etc/fstab I change this proc /proc proc defaults 0 0 /dev/mmcblk0p1 /boot vfat defaults 0 2 /dev/mmcblk0p2 / ext4 defaults,noatime 0 1 to this proc /proc proc defaults 0 0 /dev/mmcblk0p1 /boot vfat ro 0 2 /dev/mmcblk0p2 / ext4 ro,noatime 0 1 mount_unionfs /home fuse defaults 0 0 mount_unionfs /etc fuse defaults 0 0 mount_unionfs /var fuse defaults …

Not sure if my keyboard is working in DESKTOP. Do I need to to install it? Though it is working in command prompt and retro. If not, how do I use it without a mouse? in Windows, you could tab/alt/spacebar/enter and etc but none of this works. Keyboard works in command prompt

So I apologise in advance because I'm sure it's probably on this forum but I could not work out the buzzwords to find it. For whatever reason, I upgraded the cubietruck with armbian which has been on since forever and rebooted for the first time this year. On reboot it failed to find /boot and a few other things and kept bootlooping, resetting itself and then following the same procedure. I already had installed the system to my SATA SSD, so this isn't a huge deal. I've flashed the latest armbian release onto the SD card and it boots fine. Now, I see there is an install to sata option in armbian-config but it gives me the warning that it will wipe …

Hello everyone. I'm experiencing some strange issue with my cubieboard and its connection to the internet. I boot it up and it works correctly, but after a day or two, I can't communicate with it using a ssh program, or vnc viewer. My other two servers that uses Linux Mint is working normally, so I think the problem is not my router. (I even swapped the Ethernet cables between my servers). If I connect a display on my cubieboard and try to ping my Windows computer, then I'm able to ssh my cubieboard using my computer. Sometimes I'm unable to connect to my cubieboard via ssh using my windows and my Android phone, but if I try using my Linux machine, I can connect with…

Hy When I do a Speedtest-cli with my Bananapi m1, I have 320mo for Download and 180mo for Upload. When I do with my Laptop I have 700mo for Download and 180mo for Upload. My os is Armbian. I have also a Bananapi M64 and with her I have the same results than my Laptop. Some one has an Idea? Thanks

Hi, Noobee here. I'm using a NanoPi NEO with the latest legacy image updated. Using ssh to access device. Linux Lap 3.4.113-sun8i #4 SMP PREEMPT Wed Nov 22 13:45:28 CET 2017 armv7l armv7l armv7l GNU/Linux In the journalctrl log I'm getting repeated failures for ntpd and cron about every minute. 1) The router that I'm connected to is IPv4 only. In nmtui I'v set the connection to ignore IPv6, but it seems that IPv6 has not been disabled. A IPv6 IP address has been assigned to the wireless interface. Should I be doing something else? 2) Cron is constantly doing something with armbian-updates. Is this normal…

Setup: Orange Pi One 16Gb SD card Running Armbian Stretch (Mainline Kernel 4.14) Using XFCE4 Desktop Environment eGalax Touch based 1503M 15 Inch 1024*768 Monitor HDMI (IN - FROM Pi) to VGA (OUT - TO MONITOR) Adaptor I have the monitor setup and working, everything boots through to XFCE however the touch panel is inverted and the 'active area' is smaller than the screen. Although the touch panel is responding I have the following issues X and Y crossed over Both Axis Inverted roughly 2cm 'Dead Zone' on the perimiter of the screen I have attached it to my laptop and the sc…

Preamble: I have done numerous hours of reading and searching (due diligence). See end. I have a FA NanoPi NEO Core-2 LTS with shield and 64G M.2 (This shield uses JMS567-LGBB1A chip USB to sata for M.2 access). I have successfully installed Armbian from SD to and booted from the eMMC. Armbian Stretch mainline kernel 4.14.y - This image https://dl.armbian.com/nanopineocore2/Debian_stretch_next.7z armbianmonitor -u results http://ix.io/1xAA Logs indicate formatting did occur correctly as far as I can tell. The volumes are formatted as I selected - along with an 'extra' ext4 volume that looks like it is just for boot. NOTE: Since…

Hello. I have just acquired an Orange Pi plus 2e. Armbian Xenial is installed on emmc. I wish my SD card to become my /home. Can you help me? Thank you.

I am building kernel 5.10.4 sources on NanoPi Neo 2 with Armbian 20.11.10 Focal and get following error: nanopineo2:~:% cd /usr/src/linux-headers-5.10.4-sunxi64 nanopineo2:linux-headers-5.10.4-sunxi64:% sudo make headers_check nanopineo2:linux-headers-5.10.4-sunxi64:% sudo make scripts nanopineo2:linux-headers-5.10.4-sunxi64:% sudo make prepare scripts/Makefile.build:414: warning: overriding recipe for target 'modules.order' Makefile:1407: warning: ignoring old recipe for target 'modules.order' make[1]: *** No rule to make target 'arch/arm64/kernel/vdso/vdso.lds', needed by 'arch/arm64/kernel/vdso/vdso.so.dbg'. Stop. make: *** [arch/arm64/Makefile:182: vdso…

Hi all After update kernel from 5.10.60 to 5.15 or 5.16 on my Orange PI PC+ MJPEG-Streamer throws: motion throws: I tried to decrease resolution - even 320x240 not helps. Rolling back to 5.10.60 helps, but it's not very sustainable solution. Are there any known solution for 5.15-5.16?

Flashed the latest Jammy 5.15.48 image and the device went offline After connecting to HDMI I found out that RTL8188EUS is no longer available. Previous Focal image worked fine in headless mode with a `0bda:8179` dongle. Anyone knows why the driver has been removed? Thanks

raw_gadget compile failed make make -C /lib/modules/5.15.93-sunxi/build M=/root/raw-gadget-master/raw_gadget SUBDIRS=/root/raw-gadget-master/raw_gadget modules make[1]: Entering directory '/usr/src/linux-headers-5.15.93-sunxi' MODPOST /root/raw-gadget-master/raw_gadget/Module.symvers make[3]: *** No rule to make target '/root/raw-gadget-master/raw_gadget/raw_gadget.mod.o', needed by '/root/raw-gadget-master/raw_gadget/raw_gadget.ko'. Stop. make[2]: *** [scripts/Makefile.modpost:139: __modpost] Error 2 make[1]: *** [Makefile:1820: modules] Error 2 make[1]: Leaving directory '/usr/src/linux-headers-5.15.93-sunxi' I cat Module.sysmvers in /usr/src/linu…

Hello, I bought an orange pi plus 2 and connected it to the power supply, the android that is already installed recognized the mouse and keyboard without any problem. I tried to boot the ARMbian using the version I was given, the orange pi plus 2e version, because there is no direct support for the orange pi plus 2. The BOOt works without any problem, but when I create the user, the system doesn't recognize my keyboard or mouse and I get stuck on the creating user screen. I'm using a 5V/3A power supply and a bluetooth mouse. Can anyone tell me if this is a kernel bug or am I using the wrong version to BOOT?

Good day, Is there a manual how to do that with the latest Armbian versions? Since my SBC have internal NAND and SSD installed, but still need a SD card to boot fom it?

Anyone knows how enable usb 3.0 with Radxa cubie a5e? I found cubie-a5e-enable-usb3.dts from radxa's git but could apply it. Currently I am running 26.2.0-trunk.22.

Any chance of getting a legacy image for the A10-lime so that the 4 GB NAND will show up and the /root/nand-sata-install script will work? In the meantime, I'll try the image for Lime2, but I'm pretty sure that one is based on the A20 chip. Thanks,

Hello guys, This is not a question, but a feedback I think may be useful for some. I have a cubieboard 2 server application using Igor's armbian running for 8 months in several places (~40 installations). In my application: The OS in installed on NAND Armbian 3.8 + wheezy + kernel 3.4.107 There is a postgresql instance running, writing approx. 25kB/s average (not constant) Ordered data mode journaling on From time to time I've problems on clients with system corruption (not only the database, but the whole filesystem - sometimes I couldn't event boot the cubieboard anymore, had several kernel panics and more weird stuff like thousands of filesystem errors at o…

Hi there! I just downloaded the available image for the NanoPi Neo root@nanopineo:~# uname -a Linux nanopineo 3.4.112-sun8i #24 SMP PREEMPT Thu Aug 4 20:56:33 CEST 2016 armv7l armv7l armv7l GNU/Linux Audio output is only supported for HDMI (but there is no HDMI connector on the PCB). Analog output and SPDIF are not available in the device list. root@nanopineo:~# aplay -l **** List of PLAYBACK Hardware Devices **** card 0: sndhdmi [sndhdmi], device 0: SUNXI-HDMIAUDIO sndhdmi-0 [] Subdevices: 1/1 Subdevice #0: subdevice #0 root@nanopineo:~# It is mentioned that also analog should work, but it is not listed as device as you can see above. root@nanopineo:~# d…

Hi, I installed armbian onto eMMC. Frankly, I expected better results. Please anybody confirm what I understood. 1. The sequence reading speed is 70MBytes/s. 2. The sequence writing speed is 10MBytes/s. 3. eMMC is not optimized for random operations. 4. When writing operation is performed, the system gets VERY SLOW to respond. And the couple of questions. 1. What utility and where to get to benchmark disks well? 2. Will USB SSD perform with better performance than eMCC? Thanks a lot in advance and hope to see this in the FAQ. Dmitry

Hi Guys, a few weeks ago, I implemented a project wich reads the power sources of my Banana Pi. I was using /sys/power/axp_pmu/. I now made a new build to enable lcd display and such things. But now /sys/power/axp_pmu/ isn't there. Also can't find it anywhere in my system. Only /sys/power/{pm_async, pm_freeze_timeout, state, wakeup_count} Kernel of new build is 4.8.0 What have I to do, to get axp_pmu back? Martin

Hello, I just installed the incredible Armbian on my OrangePiPlus. I can't find the EMMC Boot script nan-sata-install. Has something changed in the past I didn't noticed? with regards

OrangePi Zero (512 MB) Power from 5V 2A supply, connection via Ethernet. Armbian_5.25_Orangepizero_Ubuntu_xenial_default_3.4.113 I am not strong on CLI so I have installed "lubuntu-desktop" and "gufw" and set them up. I also have NoMachine's Remote Desktop server installed, to share the Zero's virtual screen with my LAN. The project is to assess the Zero's ability to run a low volume mail server. So I have used the iRedMail script to install and set up the components of the mail server. It seems to be working - I have received the standard opening 4 emails OK. The problem lies with connecting to the Zero to find out what it's doing. …

Below is my attempt to compile the RealTek 8192cu driver for my ARMBIAN 5.31 stable Ubuntu 16.04.3 LTS 3.4.113-sun8i image running on my Orange Pi Zero. The BOLD area's below are the commands, I typed, everything else is exactly the way it came across on the console. Any help will be greatly appreciated. -0-0-0-0-0-0-0-0-0-0-0-0-0-0-0-0-0-0-0-0-0-0-0-0-0-0-0-0-0-0-0-0-0-0-0-0-0-0-0-0-0-0-0-0-0-0-0-0-0-0-0-0-0-0-0-0-0-0-0-0-0-0-0-0-0-0--0-0- root@orangepizero:~# apt-get install --reinstall linux-headers-$(uname -r) linux-headers-generic build-essential dkms git Reading package lists... Done Building dependency tree…

Hi, I try without success to attach the a.m. adapter to my NanoPi Neo. OS is Armbian_5.25_Nanopineo_Ubuntu_xenial_default_3.4.113 I did two trials in order to install the driver: 1. Download the Edimax driver und run the install.sh script. Result: Error in the processing of the make file. 2. Followed an comprehensive advice from the net. Result: Error in kernel generation. Question: Has somebody got this device running on the Neo? And how you have performed this? Please consider, I am just a Linux user, but (unfortenately) no expert. Any hints are very welcome. Thanks, Walter

I have the temperature sensor DS18B20 connected to port 20 of the gpio as w1, if I want to connect another sensor it is as easy as adding a w2 and its port in /boot/bin/orangepiplus2e.bin [w1_para] w1_used = 1 gpio = 20 [w2_para] w2_used = 1 gpio = 10 or [w1_para] w1_used = 1 gpio = 20 gpio = 10 So or something else? thanks

I did a apt-get upgrade with the current Ubuntu/Debian images and the wifi sharts on the 512MB Duo. Didn't see anything in syslog to indicate an issue. A temp fix is to freeze the kernel updates in armbian-config.

I using the following armbian and kernel: # PLEASE DO NOT EDIT THIS FILE BOARD=orangepizero BOARD_NAME="Orange Pi Zero" BOARDFAMILY=sun8i VERSION=5.38 LINUXFAMILY=sunxi BRANCH=next ARCH=arm IMAGE_TYPE=stable BOARD_TYPE=conf INITRD_ARCH=arm KERNEL_IMAGE_TYPE=zImage Linux 4.14.14-sunxi #1 SMP Thu Jan 25 12:20:57 CET 2018 armv7l GNU/Linux My box have constant kernel dumps in the log: [59763.352618] [<c010db15>] (unwind_backtrace) from [<c010a0d9>] (show_stack+0x11/0x14) [59763.352627] [<c010a0d9>] (show_stack) from [<c0867e29>] (dump_stack+0x69/0x78) [59763.352637] [<c0867e29…

I started first with orangepi pc2 (H5) but now trying the same thing on orangepi one (h3) - trying to make ili9340 module work it works flawlesly on rpi with raspbian so the hw module works (and the fb_ili9340 module in kernel talks to it properly) debug info I pulled from rpi pi@octopi:~ $ uname -a Linux octopi 4.14.79-v7+ #1159 SMP Sun Nov 4 17:50:20 GMT 2018 armv7l GNU/Linux root@octopi:~# lsmod Module Size Used by xt_tcpudp 16384 1 iptable_mangle 16384 1 xt_DSCP 16384 1 bnep 20480 2 hci_uart 36864 1 btbcm 16384 1 hc…

Hello, My orange Pi runs with Armbian Stretch 4.19.y. I like to use Orangepi boards, for audio streaming via Alexa Skills therefor I need to install gstreamer plugins apt install libgstreamer-plugins-good1.0-dev Reading package lists... Done Building dependency tree Reading state information... Done E: Unable to locate package libgstreamer-plugins-good1.0-dev E: Couldn't find any package by glob 'libgstreamer-plugins-good1.0-dev' E: Couldn't find any package by regex 'libgstreamer-plugins-good1.0-dev' this deb is only amd64 and i386, but i found this deb: libgstreamer-plugins-base1.0-dev_1.10.4-1+deb9u1_armhf…

I have tried to setup user quotas on my Orange PI PC2 and realized that there is no quota module in kernel at all. Switching between all kernel versions with armbian-config utility and all the same - they don't have quota module. Why there is no such necessary module? Is it possible to install this module and how? P.S. Sorry, maybe i have selected wrong chapter for my question

Hi, I have recently installed latest (20) Armbian Desktop for OPi PC(+), have problems installing software from network repo (synaptic). 1). Small version problem with one of Qt5 libraries (dependency for Kadu - Polish communicator GG client), synaptic wants version 1u1, on the net there is version 1u3. Installed using wget + dpkg, now Kadu starts (at least) OK. 2). PostgreSQL problem: there is version 11 of PgSQL provided, OK, it's current production. BUT there is PgAdmin3(!) in repo, which works with at most version 9.6 of PgSQL (from PgAdmin site). Now there is PgAdmin4, but (I) cannot make it work (compile from source OK, but doesn't start)., there is N…

Hi, Is the first time that I will post on the forum. I don't know if it is the right place for it. Sorry if my question doesn't belong here. I want to install that program (USB Network Gate Linux) on the lastest version of Armbian Debian based (No Ubuntu) on my board, which is NanoPi NEO 2 1GB. After plugged into the board, I entered via SSH, change psswd and I did: sudo apt-get update sudo apt-get upgrade Downloaded the file with wget https://cdn.electronic.us/products/usb-over-ethernet/linux/download/eveusb_armv7l.deb I tried to install it with dpkg -i eveusb_armv7l.deb But I get missing dependencies so... sudo ap…

Dear All, I have been downloaded the Armbian Buster OS from "https://www.armbian.com/orange-pi-3/" link and flash on Orange pi3 board. We are tesing OPI3 board with TCL monitor [(Model : 55P8E) (Resolution: Ultra HD (4K) ) 55 inch ] but getting the blank screen on display. After that we changed the TCL monitor setting by HDMI 2.0 "OFF" from "Auto" mode then it's working fine. We have another monitor which does not have HDMI 2.0 OFF mode facility so we can't use our product in market due to this limitation. FYI : same thing we tested with fresh orangepi board (with default android image) and it working fine. It will be good if some…

I have several OpiOne Plus boards. They differ by the date of manufacture (let's say 1st batch and 2nd batch) 1st batch: Works with kernel 5.10.x but does not boot kernel 5.15.x. Red light is on, power meter shows very little consumption, ethernet does not go up. Switching to last available 5.10.x kernel resolves the situation. 2nd batch: Successfully work with both 5.10.x and work with 5.15.x. Green light is on, power meter shows adequate consumption, board works. I'm pretty sure, that no more "new" opi one plus will appear at Xunlong shop and this issue won't be fixed in visible future. But well.. How I can "freeze" kern…

need help to drive Orangepi pc plus with waveshare 3.5inch display with xpt2046 touch driver. OS:- Armbian 22.11 Jammy XFCE Desktop version Kernal :- Kernel 5.15.y link for the os :- https://www.armbian.com/orange-pi-pc-plus/ link for display :- https://www.waveshare.com/3.5inch-hdmi-lcd.htm can any one help to drive touch screen you can message if you need more information,

Hello everyone, I am new to the world of Orange Pi 3 LTS 1.4 and Armbian. I have very recently installed this os on my Orange, it turns out to work almost everything correctly except Wifi and bluetooth. It is really important for me to get Wifi working for various projects I have in mind and I find armbian very reliable and supported. When I try to connect the Network Manager interface returns: On the net I found various discussions about this but no real solution. Does this happen to you as well? It seems not to recognize the wifi chip. Below is the armbianmonitor: https://paste.armbian.com/iteheqokov …

Hi, I need a help. I have waveshare 4inc lcd touch play display but I don’t know how to enable touch play. Please Help me.

Hello igor! Thank you. The last build 3.0 jessie with kernel 4.0.4 works fine. But i had some problem with first boot after installation. After i try to change password for root bpi drop connection and after reconnection password still was 1234. I tried about 5 times. I had to reboot bpi with disconnect power and after reboot i was able to change password normally.

Hi, I try to run Armbian 4.5 (Bananapi Ubuntu trusty 3.4.109 desktop) on my Banana Pi M1+, but after the "Starting kernel..." prompt the monitor show only the "No signal" warning. (I connect the Banana Pi to my monitor with HDMI - DVI converter, I will be able to try it with single HDMI cable a few days later.) However, it boots. I have a lot of tries to change the boot.cmd and the banana.bin, but I didn't achieve satisfying result. The result of dmesg: [ 0.000000] Booting Linux on physical CPU 0 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.4.110-sun7i (root@production) (gcc v…

At the moment it seems that python library to manage the gpio is working well I'm trying with wiringPi with C++ under netbeans but it doesn't work . The compiler is the g++ and other parameters are ok ...I think But how to use this package with C/C++ ? In my project I include the #include <wiringPi.h> And netbeans compiles without any error, that's ok . But when I add this line of code wiringPiSetup () ; I get two errors .Into the header file this function is declared as external . I think there is a conflict because my project is C++ but the library is in C and then mistake when compile . Using the terminal I type make blink and then ./blin…

Hello, I have a cubieboard A10 connected to a SSD drive (transcend) trough the sata port. I use it as a headless server to run transmission, nfs and barracudadrive. The board runs from a sandisk 16gb µSD card, the data is on the SSD (with dynamic links). I use the standard legacy armbian image without DE. The SSD is powered by the board and the board is powered with a 2A 5V power supply, comming from a sony psp. If I measure the powerconsumption at the wallsocket, I measure 6W in idle and it goes up to 10W in use (so just enough for the power supply). Because there is a specialist here in powerconsumption (tkaiser), I wonder if it isn't possible to make …

I have done a fresh install of Armbian 5.20 for my pc+. I was hoping that the software defined radio software GQRX would now be able to find Pulse Audio and work properly. But I still get the same error. 192.168.6.103george@orangepipcplus:~$ sudo gqrx [sudo] password for george: linux; GNU C++ version 4.9.1; Boost_105500; UHD_003.007.003-0-unknown gr-osmosdr 0.1.3 (0.1.3) gnuradio 3.7.5 built-in source types: file osmosdr fcd rtl rtl_tcp uhd miri hackrf bladerf rfspace airspy Using Volk machine: neon_hardfp_orc pulseaudio/pa_sink.cc: pa_simple_new() failed: Connection refused Could not resolve property : pattern10600 Could not resolve prope…

Hi everyone!! Any chance to know the estimated schedule for having Gb ethernet working in mainline kernel 4.x for this board? Greetings!!

Hi, admin. I installed Mainline 4.9.12-sunxi on my cubieboard 2. Since the Mainline kernel doesn't have Mail driver and hardware accelerated video decoding, I want to downgrade the kernel to Legacy 3.4.113. If I don't want to reinstall the whole system, is there anyway to replace the kernel with the old version? Many thks!

Hello Everyone , Can anyone please guide me . I need to use nano pi neo's USB pins(2.54mm x 2 header pins) and looking for resources related to it. I am using armbian OS on it. I am struggling with it , I read many resources on the web but none of them provide detailed information. Any help will really be appreciated !! Thanks so much!!

I put the log of the console... I can compile a linux 4.11 and ubuntu 16.04.3 server with the packet from ARMBIAN... thats greats... but i had to correct some files to compile OK!!! Ubuntu 16.04.3 LTS bananapim2ultra ttyS0 bananapim2ultra login: root Password: Last login: Mon Nov 13 20:47:13 UTC 2017 on ttyS0 ____ ____ _ __ __ ____ _ _ _ _ | __ ) __ _ _ __ __ _ _ __ __ _ | _ \(_) | \/ |___ \ | | | | | |_ | _ \ / _` | '_ \ / _` | '_ \ / _` | | |_) | | | |\/| | __) | | | | | | __| | |_) | (_| | | | | (_| | | | | (_| | | __/| | | | | |/ __/ | |_| | | |_ |____/ \__,_|_| |_|\__,_|_| |_|\…

Supporting of smb1 have been disabled on my windows hosts for security reasons. And now there are no ability to mount share from windows hosts on my orange pi pc. Can developers add this feature to armbian system in nearest updates? root@orangepipc:/media# mount -t cifs //192.168.1.5/D /media/share_test/ --verbose -o vers=2.1,user=user,pass=verystrongpassword mount.cifs kernel mount options: ip=192.168.1.5,unc=\\192.168.1.5\D,vers=2.1,user=user,pass=******** mount error(22): Invalid argument Refer to the mount.cifs(8) manual page (e.g. man mount.cifs) root@orangepipc:/media# mount -t cifs //192.168.1.5/D /media/share_test/ --verbose -o user=user,pass=verystron…

today I made an update an got the following message The following packages will be upgraded: hostapd linux-image-sun8i linux-jessie-root-orangepione linux-libc-dev linux-u-boot-orangepione-default sunxi-tools 6 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. Need to get 13,9 MB/15,0 MB of archives. After this operation, 2.048 B of additional disk space will be used. Get:1 http://beta.armbian.com/ jessie/jessie-utils hostapd armhf 2:2.6-4~armbian5.37.180112+1 [363 kB] Get:2 http://beta.armbian.com/ jessie/main linux-image-sun8i armhf 5.37.180112 [12,9 MB] Get:3 http://beta.armbian.com/ jessie/main linux-jessie-root-orangepione armhf 5.37.180112 [485 kB] …

I know that mainline kernel now is 4.14, and now is experimental for A64.. I have tried build my own armbian form Orangepi Win Plus. Kernel 4.14 does not recognize audio and LAN. Question. Is it possible to build Armbian 5.51 with old kernel 3.10 for that device ( Ubuntu 18.04). Old kernel works much better with devices A64 cpu. I know that is old......but mayby not so experimental.....

Greetings to all, Preamble: Thanks to all that have worked to make the Armbian project what it is today. It is greatly appreciated! I have done numerous hours of reading and searching (due diligence). I know I could run a benchmarks and all but that means even more delay reaching the objective. Some brief guidance from those who have gone before would save a lot of time and would be greatly appreciated. Looking at the datasheets wasn't real helpful in guesstimating optimum performance configuration - especially since there are so many other factors that have an impact. Background: My objective is to achieve a reliable, long lif…

Board NEO2 with Armbian Stretch mainline kernel 4.19.y many errors: info:xxxxx[3087]::2019-01-30T10:19:10.607956+00:00: /usr/sbin/xxxxx: error while loading shared libraries: libsystemd.so.0: cannot open shared object file: No such file or directory info:xxxxx[3093]::2019-01-30T10:19:20.857869+00:00: /usr/sbin/xxxxx: error while loading shared libraries: libsystemd.so.0: cannot open shared object file: No such file or directory info:xxxxx[3097]::2019-01-30T10:19:31.114980+00:00: /usr/sbin/xxxxx: error while loading shared libraries: libsystemd.so.0: cannot open shared object file: No such file or directory info:xxxxx[3106]::2019-01-30T10:19:41.3579…

I try to use DS1302 RT Clock for my Orange Pi One that uses armbian. I connected this way: DS3102 VCC -> OrangePi pin 2 ( 5V ) DS3102 GND -> OrangePi pin 9 ( GND ) DS3102 CLK -> OrangePi pin 3 ( TWI0_SDA ) DS3102 DAT -> OrangePi pin 5 ( TWI0_SCK ) I added i2c0 to overlays of /boot/armbianEnv.txt and rebooted. Now when I run "sudo i2cdetect -y 0", I get nothing: 0 1 2 3 4 5 6 7 8 9 a b c d e f 00: -- -- -- -- -- -- -- -- -- -- -- -- -- 10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 30: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 4…

I am trying to enable Winstar TFT display on Olimex Lime2 board under the kernel 5.4. Display spec is here: https://www.winstar.com.tw/products/tft-lcd/ips-tft/lvds-tft.html Up to the day we've been using the legacy kernel 3.4 and the display worked fine -- the u-boot was compiled with the settings (CONFIG_VIDEO_LCD_MODE, CONFIG_VIDEO_LCD_POWER etc) suggested here: When I try to use the same settings in the mainline sources of armbian, the display does not work. I've enabled backlight with a DTS overlay and the backlight works but the display stays blank. Here is the output of dmesg: [ 2.846134] printk…

Hi, I have "orange pi 3" and I want to migrate "Debian Buster" from "SD" card to eMMC. I run this command sudo nand-sata-install And I only get this! see link https://ibb.co/wQz0jx4 As you can see there is no item "Boot from eMMC - system on eMMC" What am I doing wrong? PS - Armbian Buster downloaded from https://www.armbian.com/orange-pi-3/

Dear Armbian Zen Masters, Please, help me turn on bluetooth on my Orange Pi Zero Plus 2 H5 board (running armbian focal server). This board is up to date (apt update and upgrade). I've enabled bluetooth support from armbian-config on this board. But, bluetoothctl is not working (gets stuck in waiting for response on command execution). Wifi is working fine on this board. (I could easily use bluetoothctl on my khadas vim3 pro board with "current armbian xfce desktop" on it) Waiting for your response. (Please, find the relevant board info below.) Thanks in advance, Spherulite. -------------------------------------------…

has anyone ordered and/or played with this https://www.cnx-software.com/2023/07/03/orange-pi-zero-3-allwinner-h618-sbc-ships-with-up-to-4gb-ram/ https://liliputing.com/orange-pi-zero-3-is-a-cheap-tiny-single-board-pc-with-up-to-4gb-ram-gigabit-ethernet-and-allwinner-h618/ http://www.orangepi.org/html/hardWare/computerAndMicrocontrollers/details/Orange-Pi-Zero-3.html even the linux images is very 'fresh' as in that they are just released *yesterday* 😄

Hi @ertugrul and @afaulkner420. I was trying to create a bootable drive for the orangepi 3 lts and it always fails in validation in balenaEtcher. I tried even with that and it does not seems to work. The non-desktop versions worked however. I didn't see any error messages during the flashing and everything else seemed to work well. Thanks, Ashish

Board: NanoPi NEO Air SoC: Allwinner H3 (sun8i platform) Armbian Release: Bookworm (Debian 12 base) - Tested with both beta and stable repositories. Problem Description: The SPI device node (/dev/spidev0.0) does not get created on Armbian Bookworm for the NanoPi NEO Air, preventing the use of SPI peripherals. This issue occurs despite correctly enabling the sun8i-h3-spi-spidev overlay in /boot/armbianEnv.txt. Diagnosis / Root Cause: Through troubleshooting, it was determined that the essential kernel module required for the Allwinner SPI controller, spi-sunxi.ko, is missing from the standard kernel image packages provided by Armbian for Boo…

Hi Igor, could you please look into the character set problem mentioned in the comments? Jessie kernel 3.4: Line-drawing graphics for programs like aptitude or mc don't work. The screen displays garbled characters instead, which renders all programms with a graphic interface unusable :-(. After install I noticed that dpkg-reconfigure locales did not work as expected. LANGUAGE stays en_US and LC_MESSAGES stays posix. I configured them manually # update-locale LANGUAGE=de_DE.UTF-8 LC_MESSAGES=de_DE.UTF-8 but german umlauts (äöü) still don*t work although the system now seems to be configured correctly for de_DE.UTF-8. I don't care too much about the u…

Hello On my Banana PI infrared receiver is not detected at bootup. I'm running armbian 4.7 jessie. The only /dev/input device is that of axp20x-pekj, which I undestand to be a power controller. My issue is similar as found in this thread: http://forum.armbian.com/index.php/topic/475-bananapi-r1-no-infrared-device/ Except ofcourse the board is different From the other thread I gather I need to change something in regards to dtb-s, but I guess as the boards are different using the same one as mentioned is not a good idea.

Has anybody got this working with mainline kernel? When I do: brcm_patchram_plus -d --patchram bcm20710a1.hcd --enable_hci --bd_addr 11:22:33:44:55:66 --no2bytes --tosleep 1000 /dev/ttyS1 I get this: option patchram with arg bcm20710a1.hcd option enable_hci option bd_addr with arg 11:22:33:44:55:66 option no2bytes option tosleep with arg 1000 /dev/ttyS1 Previous discipline = 0 Done setting line discpline Current discipline = 0 Waiting CTS... And there it stops. No dev hci0 created. I woulb be thankful for any hints that point me in the right direction. Paul

wget https://cdn.kernel.org/pub/linux/kernel/v4.x/linux-4.6.6.tar.xz tar -xpJf linux-4.6.6.tar.xz ln -s linux-4.6.6 linux make oldconfig make menuconfig make-kpkg clean CONCURENCY_LEVEL=3 fakeroot make-kpkg --initrd --revision=14082016.01 kernel_image kernel_headers But USB do not work! I do not found CONFIG_AXP20X_POWER in new config. After manual add its gone! How to solve this ?????

Hello. I am new to Armbian. My Banana PI M2 (already a disappointment, bad purchase on my part) is up and running but will not reboot all the way. It shuts down but does not restart again. Any ideas how to go about troubleshooting and fixing this? It is a deal breaker for what I planned to be a headless system. It needs to be restartable without physically pulling the plug to do so.

Just found it on Aliexpress: https://www.aliexpress.com/item/New-Orange-Pi-PC2-H5-64bit-Support-the-Lubuntu-linux-and-android-mini-PC-Beyond-Raspberry/32761481418.html I ordered one to go and try it out / check the features. I am very interested in seeing the performance / heat dissipation...

Hi, By installing armbian jessie on my Orange pi plus 2 E, after login,I have a choice to change the resolution of screen( to 1920x1080),but unfortunately I have no succes. Can you please tel me how can I do that? Thanks Sadegh

Hi, is it possible to install armbian on the emmc and a second armbian on the microsd card? So, if no microsd card insert the nanopi boot from emmc, otherwise boot from microsd?

Hi armbian users, I would like to know if it is possible to compile a own version of armbian with the following packages git nginx php5-json php5-fpm php5 so I can run Linux-dash on my cubietruck. This is the guide I am using to install linux-dash Set up linux-dash on Debian, Ubuntu or Linux Mint http://xmodulo.com/monitor-linux-server-desktop-remotely-web-browser.html …

I have a NanoPi Neo that's been up about 4 months and I am using it for DHCP and DNS caching (using dnsmasq). This has been working fine over SSH until after the update. Previously, I could log in, edit the dnsmasq settings, and restart the service without issue. Now, when I attempt to restart a service (not just dnsmasq, I tested a couple others), it hangs and looks like it's waiting for a password entry on the TTY. (I'm logged in over SSH and I do not have a TTY connected). ... in first SSH session, this just hangs forever until I ctrl-C: root@nanopineo:/etc# systemctl restart dnsmasq ... in second SSH session, PS shows: root 1825 783 0…

Seems that USB is missing in the latest trunk pull Spoiler [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.13.0-sun50iw2 (root@YPC) (gcc version 7.1.1 20170707 (Linaro GCC 7.1-2017.08)) #2 SMP Mon Sep 11 23:11:59 EDT 2017 [ 0.000000] Boot CPU: AArch64 Processor [410fd034] [ 0.000000] Machine model: OrangePi Zero Plus2 [ 0.000000] Reserved memory: created CMA memory pool at 0x000000005c000000, size 64 MiB [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [ 0.000000] NUMA: No NUMA configuration found [ 0.000000] NUMA: Faking a node at [mem 0x0000000000000000-0x000…

I use two Orange pi PC for music studio use with Jack, Ardour and several midi software to use with midi surface controls and keyboards. Everything works great with an external USB DAC but when I try to use the on board DAC through the HDMI output the sound comes out slowed down to maybe a third of the speed making everything sound like it's in slow motion. Any help to fix this would really be appreciated.

Hi, I tried to enable the i2c in u-boot by using the config flags shown in the Readme. But I had no success. What do I miss?

Dear experts, I would like to make my OrangePi PC on board LEDs works like power (Green: Default ON) and status (Red:heartbeat blinking). root@orangepipc:~# ls -1 /sys/class/leds/ orangepi:green:pwr orangepi:red:status root@orangepipc:~# Any experts can assist me on this matter on edit in /etc/rc.local to get it works. Thanks in advance and appreciated your help. Regards, Sai Hou

Using Firefox Send, expires after 7 days / 100 downloads. My own build - works nicely for me & installs to eMMC. 203.6 MB compressed. Use xz to decompress. Filename: Armbian_5.77_Orangepi3_Ubuntu_bionic_dev_5.0.4.img.xz https://send.firefox.com/download/e2961cb805fba655/#rquCw2FsaPvGQpVviByLHA

Hi there, I am trying to download the lime2 legacy image : https://www.armbian.com/olimex-lime-2/#kernels-archive But the link is dead (error 404). Any chance to get this back up? Or can I use another legacy image and just change the script.bin or is there other things to modify? Thanks Edit : I just found the image on olimex website : ftp://staging.olimex.com/Allwinner_Images/A20-OLinuXino/2.legacy_images_kernel_3.4.x/