Allwinner sunxi

My armbian system is installed from Armbian_community_25.2.0-trunk.160_Orangepipc_bookworm_current_6.6.62_minimal.img.xz. All updates applied. I wanted to make it run with overlayroot. So, I installed the package and added "extraargs=overlayroot=tmpfs" to armbianEnv.txt. After reboot nothing changed. In /run/initramfs/overlayroot.log I found this: builtin set cfgdisk='disabled' [warning]: loaded 'overlay' module but no 'overlay' in /proc/filesystems Unable to find driver/module. searched: overlay overlayfs [failure]: Unable to find a driver. searched: overlay overlayfs I looked into scripts/init-bottom/overlayroot inside the initrd, and f…

I have BPI-M2+ shutdown -P now or poweroff does not power off the board Board is just halted and fan is still spinning Anyway to power off the board completely?

Hi, Does armbiam fully support SATA port on Olimex Lime2? greetings, Marcin

Dear.I run for years on my cb2 a home automation system..Only now i need some more power. [ my cpu is running to his max ]Can i speed up the cpu of the CB2?I hope that there ia someone that can help me to let live my cb2 longer..Thanks..

i was able to get analog audio from the orange pi one (with some soldering of course) and its plugged into my speakers, but the sound quality is poor while using the default mpv player that came with the image. Were is the equalizer so i can change things like frequencies to make more bass or treble? The music sounds flat like from a portable dvd player.

I just installed Armbian 5.30 Desktop to my Orange PI Plus 2E I want to use for video playback, but built in MPV player. MKV videos quality is good, but the player has very poor functionality. And it plays Xvid Encoded AVI files totally mess way with lots of artifacts, sometimes with colored stripes instead of video stream. I also tried SMPlayer and VLC, but they play some MKV files with green artifacts and AVIs are totally mess. I tried different settings for VLC but have not reached success with the settings. So what video player is universal and good for Armbian ro what settings should I set to get good video quality?

Armbian_community_25.5.0-trunk.538_Orangepizero2w_bookworm_current_6.12.23_minimal.img When try to boot. It get stuck trying to boot from emmc. It does not have emmc. After several power restart sometimes it boots form microsd. also it ask for tags which has only one option "Solved". I had to tag this topic as solved in order to be able to submit it.

Managed to get RaspAP working on my OrangePi Zero 3 (OPZ3). At the time of writing, the RaspAP quick installer script did not support Ubuntu 24.04 on my OPZ3. So, I decided to try and install RaspAP manually, based on the manual installation step on the site. It mostly went smoothly, with some hiccups along the way. Some tweaks needed were around disabling wpa_supplicant and a missing library for isoquery. Some configuration details: OrangePi Zero 3 with 1GB ram Ubuntu 24.04 (6.12.23) server image downloaded from the Armbian site After all the apt upgrades and updates, the kernal was updated to 6.12.35 Attached below is the…

Hi All, I try to get a web page accessible from a hotspot with a notification sent to customer when it connects to the AP (using lighttpd, hostapd, dnsmasq, squid and squidguard) I can connect to the AP but I have no response to the ping On the Nano Pi Air in AP mode : iwconfig => wlan0 IEEE 802.11 ESSID:"Armbian" ifconfig => inet addr:192.168.101.1 I must be able to switch between modes with my software so I use scripts : To switch in AP mode => pkill -f 'ifup .*wlan0'; ifdown wlan0 ifdown wlan0 /bin/systemctl stop NetworkManager && /bin/systemctl disable NetworkManager && kill $(c…

I have a problem with annoying randomly flickering cursor in armbian 5.34.171102 ubuntu desktop with mainline kernel. It's plain system after instalation, just chromium browser opened. The legacy kernel is OK on my board Orange pi plus 2e. Any idea what might cause this<

Let's say I'm deploying hundreds of warehoused devices employing an H5-based Orange Pi Zero Plus, and I need a reliable distinct identifier for each. In another application we're using the MAC address, but that seems not to be EEPROM-ed on the OPiZ+. So, okay, SOC Unique ID has been mentioned elsewhere (MAC generation on the OPiZ+), but where is it available? cat /proc/cpuinfo does not include "Serial". lshw has a "serial" but I'm not sure that's reliable (I've got a Beaglebone that doesn't show one - and it says /proc/cpuinfo Serial: 00000000). So what's a good low-cost (i.e. not by launching Perl scripts) way to obtain the unique CPU identifie…

My third Orange Pi Zero came last week, yesterday I plugged it and had heating issues... So I started reading, learning and testing.... Setup: OPiZ-1: 256 MB, no SPI flash - Has extension board plugged - for comparison OPiZ-2: 512 MB, with SPI flash OPiZ-3: 256 MB, with SPI flash (new one with problem) Test conditions: All with (newish) Sandisk Ultra 16 GB Class 10 All new formatted (SD Formatter) and burned/validated (Etcher v1.0.0) with Armbian_5.25_Orangepizero_Debian_jessie_default_3.4.113.img All on my desk - side by side, ambient temperature 25.0-25.1 C (20 cm from boards, no air flow) No case, no passive/ac…

Hi - Just checked out latest greatest code from git to compile new stretch image for my NanoPiNeo2 ( Armbian_5.46_Nanopineo2_Debian_stretch_next_4.14.47 ) but seems it won't boot up. Tried two SDcards and two different boards but same result. Tried both Etscher ( 1.4.4 ) and Rufus ( 3 ) but same result, any issue known that I missed ? Please note I am building a standard image ( thus no customised settings ) also came to my attention the board becomes quite warm, this is unusual . Thanks

I had successfully installed Armbian_2022.08.8_Bananapi_bullseye_CLI_5.15.74 on my M1 and copied the system to an SSD which I had attached to the SATA port. Then I had updated the UUID in armbianEnv.txt and running the system from SSD was working fine. The system was running headless in my closet for about 2 months, and I even had no problems to remotely restart the device until today, when it did not come back up after a reboot. I took it from the closed and hooked it to a monitor just to see the following error messages: ** Bad device specification mmc 0 ** Couldn't find partition mmc 0 I suspected a broken SD card but a check on my Ubuntu de…

Hi, I've build an SD card image with in a buildroot myself, used the stable branch as suggested. "For stable branch use --branch=v23.11"..and that all worked good so far. I'm no linux guy at all and begun some investigations, installed packages and configured the system, this was an desktop variant with xfce. Somewhere in the middle of work I've got the message that a security update is available and I should do an apt upgrade..done that. Interresting for me was, that I've got an Update to Armbian 24.2.1 jammy.. ok ..then this is so. I've noticed later that I don't have any video output from X11 anymore, after the login prompt the sc…

Hi all. I've got an issue trying to use Bluetooth and RFCOMM. My system is: Cubieboard2 running latest img and updated with apt-get update/upgrade: ____ _ _ _ _ ____ / ___| _| |__ (_) ___| |__ ___ __ _ _ __ __| | |___ \ | | | | | | '_ \| |/ _ \ '_ \ / _ \ / _` | '__/ _` | __) | | |__| |_| | |_) | | __/ |_) | (_) | (_| | | | (_| | / __/ \____\__,_|_.__/|_|\___|_.__/ \___/ \__,_|_| \__,_| |_____| Welcome to ARMBIAN 5.25 stable Debian GNU/Linux 8 (jessie) 4.9.12-sunxi System load: 0.07 Up time: 30 min Me…

[Apologies. There seem to be a number of posting close to this subject. Trying to get a definitive view] So, with the 3.4.113 kernel the gc2035 driver fails when trying to identify the sensor. The problem lies in the sensor_init function where a read of the I2C/CCI bus fails. Before I break out the breakout board can anyone verify these basics please? I've tried the various suggestions for setting one of the GPIO pins prior to loading the modules but to no avail. Cable, blue insulation on top side of the expansion board FPC, blue insulation facing up towards SD card on the OPI one. FEX as below. [csi0] vip_used = 1 vip…

I had got a OrangePI One Plus (H6) on a few day ago. I had a problem with HDMI to VGA Converter that it do not work with my OrangePI One Plus. I guess it maybe about the Power of that HDMI on OrangePI One Plus was not enough for HDMI to VGA Converter's operation. Then I fix it by replace regular HDMI to VGA to be HDMI to VGA with 5V external port. And Yeah, it's work fine!!! but I had OrangePI One (H3), OrangePI PC2(H5) and OrangePI Prime(A64) too which All of them had no problem with HDMI to VGA Converter. I feel wonder with this problem on OrangePI One Plus.

I'm trying to setup a GPS-based time server on an Orange PI Zero 3, running Armbian 24.8.0-trunk.495, kernel 6.6.43-current-sunxi64. I have the exact same hardware setup working fine on a RaspberryPI 4b, running RPI OS / Debian 11 (bullseye) , kernel 6.1.21-v8+ #1642. On the RPI4, gpsd recognises the (cheap chinese "M8N") GPS module as u-blox and keeps working in a stable way root@rpi4:~# gpsctl /dev/ttyS0 /dev/ttyS0 identified as a u-blox SW ROM CORE 3.01 (107888),HW 00080000 at 9600 baud. the /boot/config.txt has these two lines for the UART config enable_uart=1 init_uart_baud=9600 On the OPIZ3 I configured /boot/armbianEnv.txt for UART5…

Dears, I have done the last update. I lost dkms, and when trying to recompile/reinstall it, I started get strange errors. It seems binaries in linux-headers are compiled for Intel. I would even the kernel is configure for Intel. Was not able to compile the module actually. Was there some mishap? Rui

Orange Pi Lite - Armbian 5.14 The desktop shutdown (or shutdown -h now) shuts down the desktop, the system starts shutting down, then the desktop starts again, then disappears and the system shuts down. Its not a disastrous problem, but just annoying. I've traced it to the fact that 'nodm' is seeing the desktop stop, and then restarting it. Apparently either 'nodm' isn't getting the shutdown signal, or ignoring it, or getting it too late. Any guidance on what 'nodm' config, or some other config might help me to fix this? /K

Just got my orange pi up and running with armbian jesse and the wifi is working but there is no web browser. I want to install mozilla firefox. I have the latest version on the orange pi but dont know how to install it. any help would be appreciated. I am running the xfce4 desktop. I get a cannot execute binary file: Exec format error when i try to run it

I am trying to set up a Orange Pi Zero to use as a small NAT/ Bridge Device. I want to use an Android phone in USB tether mode to give its 4g connection to an interface on the opi zero then use a network bridge to join the 4g connection to the lan port, also the opi zero is gonna run a small section of code on the USB interface that changes the TTL of all packets through the interface. On my linux mint box the script looks like pkexec sysctl net.ipv4.ip_default_ttl=65 && echo 65 | pkexec tee /proc/sys/net/ipv4/ip_default_ttl but i am running into issues with the very first part, that is getting my phone native USB tether to be recognized as an interface in …

First of all: my compliments to the staff of armbian for the important work done. I bought some lamobo r1 boards to use in a production environment such as (open)vpn router to realize a tele-service with PLC. I installed bananian (the first distro that I found on internet) but after a week I switched to armbian trying to create my own image from scratch. Very well, I like to have control over things. The question is: I should connect a lipo battery to the board so that when the main power goes off a daemon script syncs sd and then shutdown, but when the main power is reconnected the board must do a reboot automatically. It is possible to do this? Where should my daemon sc…

Thanks for the hard work on Armbian. I finally got the EmulationStation GUI to run under OpenGL ES @ ~88fps on OrangePI PC. The trick was mostly building SDL2 from source and not installing it with apt-get per the instructions. Really want to avoid anything "mesa". IIRC, I configured SDL2 with a similar command before making: ./configure --host=arm-linux-gnueabihf --disable-video-opengl Then building EmulationStation from source using: cmake -DGLSystem=OpenGL\ ES . make make install FWIW I did symlink some shared objects into /usr/lib/ (like libMali.so) Next is sorting out libretro stuff.

Hi there, after a recent apt upgrade I have problem with WiFi. I CAN connect to one WiFi, WPA2, static IP. However I CAN'T connect to another one, WPA2, tried with static and dynamic IP. I am using NetworkManager. Searched forum, deleted /etc/networks/interfaces. Information in /etc/NetworkManager/"network name" seems to be correct. Almost the same as for working net. (except uuid & IP info) CAN also connect from laptop. wpa_supplicant line from ps: /sbin/wpa_supplicant -u -s -O /run/wpa_supplicant What should I check else?

Hello everyone! can anyone help with latest debian/ubntu on Opi1+ and emmc storage. There is no /dev/mmcblk1p* . Only /dev/mmcblk0p* (microSD). Aslo there is no option in armbian-config...

I have set up a server on a nanopi-r2s running Armbian version 5.15.25-rockchip64. It all works fine apart from one thing: while other devices can successfully use BIND on the server, the server itself cannot find the local BIND. If I type in this command host device.localdomain 127.0.0.1 it returns the following: device.localdomain has address 192.168.0.20 192.168.0.20 is the correct address for device.localdomain from the local BIND. If I omit the 127.0.0.1 from the command, it does not find the correct address.: device.localdomain has address 36.86.63.182 device.localdomain has address 36.86.63.182 Host device.localdomain not …

Hallo, In my mind i want to build a cluster with 5 bpi m2+. Purpose: Home-server- Storage off all media files/also using cointainers/Raid*** - Back-up for Win/Linux based pc in home. Media-server(KODI)- Use at first one screen/future >more -access by internet Back-up -Cloudservice (for example BOX) Extra - NAS ***(5 bpi * 2 usb can be up to 10 usb-harddisk off 2GB or more. I just started with bpi. But this what i have in mind. So 20 GB or more can be set to Raid0/Raid5 Every information is welcome. Also about wich Os can work the best etc.. With kindly regards, Henk

I am using a system I built from the trunk of Armbian for the pine64so. After booting up the mouse does not do "smooth mouse tracking". The movement of the mouse lags behind where it should be and has to "catch up" which takes several seconds. I consider it unusable doing this. This is Version "20.04.1 LTS (Focal Fossa)" Armbian 20.08.0-trunk Focal 5.7.17-sunxi64 #trunk Mon Aug 24 03:00:31 PDT 2020 aarch64

Hello everyone! I am designing a PCB and I need to know if there is a possibility to swap SPI0_CLK and SPI0_CS by changing this line from: pins = "PC0", "PC1", "PC2", "PC3"; to pins = "PC0", "PC1", "PC3", "PC2"; Currently I don't have a board to check it myself. Any ideas if this would even work? Thanks!

Friends I want to use A20 for our IP calling project which include Linphone. I confirmed from IGOR that there is no sound issues regarding audio driver while capturing voice from microphone or getting audio from headphone jack with his debian images. I only have to confirm that did anybody use LINPHONE on A20 debian or trusty system.

Hi, is it possible to install RealVNC Server with the title setup ? I use around 7 Devices with RealVNC. I prefer to use this for the 8th too.

Hi, As you can see in the armbianmonitor output, an error prevents from using the Spi with the Orange pi Zero board using a newly downloaded Armbian image. The output refers to the Armbian-Hirsute image (the last one tested) but the same error also occurs with the Buster and Focal images. Unfortunately I don't have the knowledge to correct the following error myself: [3.349869] sun6i-spi 1c68000.spi: chipselect 0 already in use [3.349901] spi_master spi0: spi_device register error / soc / spi @ 1c68000 / flash @ 0 [3.349953] spi_master spi0: Failed to create SPI device for / soc / spi @ 1c68000 / flash @ 0 The only commands exe…

I have an ap in banana pi whose ip is 192.168.4.1. And eth0 on banana pi whose static ip is 192.168.144.100. I would like to connect device A from banana pi's ap and also it can ping to the eth0. So far I had tried: sudo iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE sudo iptables -A FORWARD -i wlan0 -o eth0 -m state --state RELATED,ESTABLISHED -j ACCEPT sudo iptables -A FORWARD -i eth0 -o wlan0 -j ACCEPT

Hi all I need a bit of assistance in installing OpenMediaVault on the Cubietruck. I'll admit I tried this a while back, so I'm coming back to this to try and use my Cubietruck as a mini NAS. Tried to install using the instructions over at the debian site, but after the install, the web interface showed lots of errors and it wouldn't work. Done lots of googling to try and find further information but I'll admit I'm a bit vexed. Does anyone have some idiot-proof instructions or a prebuilt image they could provide to a bit of a linux newby? thanks in advance -matt

I want to disable 2 cores, downlock the CPU and limit the ethernet i installed Armbian_5.33.171003_Orangepizero_Ubuntu_xenial_next_4.13.4.img via Fetcher but h3consumption can't be found nor apt-get install'd isn't it part of Armbian by now or is it simply not part of the Pi Zero armbian? Because I read a blog of someone who increased the stability of their pi zero with h3consumption

sudo -s i use : modprobe fbtft_device custom name=fb_ili9341 gpios=reset:0,dc:3 speed=48000000 rotate=90 busnum=0 txbuflen=65536 libkmod: ERROR ../libkmod/libkmod-config.c:635 kmod_config_parse: /etc/modprobe.d/fbtft.conf line 1: ignoring bad line starting with 'modprobe' modprobe: ERROR: could not insert 'fbtft_device': Invalid argument

Hello everyone, I have OrangePiPlus2E and I use Debian Jessie default 3.4.113-sun8i I was download and install Debian Stretch Next on second card and NFS don't work. I installed nfs-kernel-server and nfs-common. Next I copy exports file from older Debian and I can't connect to my Armbian via NFS protocol. Log file tell mi device trying connect, but I get answer from Armbian: can't get hostname. I don't know whad I did wrong. If I change CF card, NFS works fine on Debian Jessie. Could you help me? Regards

Hello, I would like to download the Armbian Buster image. This is not possible due to missing links. The Bionic is download link is working though. Sheers

Hi, I thought I'd share this in case anyone else is in the same situation as I. I've been trying to get my Orange Pi Lite to boot the latest (Aug 26 2021) images. I've tried Focal, Bullseye and Hirsute, and the Lite doesn't seem to care for any of them. "Armbian_21.02.1_Orangepilite_buster_current_5.10.12_desktop" from the Archive section does boot, as do the versions of Ubuntu and Debian from the Orange Pi website. Perhaps if I had a serial terminal connected I would be able to troubleshoot this, but I don't yet. I'm using a Sandisk Ultra A1 64Gb and I'm monitoring my power supply with my oscilloscope and haven't noticed any dips belo…

Hello friends, I found these cameras for Orange Pi: https://www.aliexpress.com/item/Orange-Pi-Open-source-IP-Camera-with-wide-angle-lens-Smart-Home-Control-Device-for-PC/32652476606.html https://www.aliexpress.com/item/2MP-Camera-module-for-Orange-Pi-PC-Zero-One-PC-Plus-Plus2-Plus2e-Zero-Plus-2/32833966539.html Can it work directly with Orange Pi Zero Plus2-h3? Or is there any difference with h5? Do you know how many fps with which resolution does this camera have? Thanks.

Hello I have a bananapi m1 with armbian Linux bananapi 4.3.3-sunxi #3 SMP Mon Dec 28 11:27:16 CET 2015 armv7l GNU/Linux I need to add serial ports so I think I need to rebuild a kernel as described here: http://forum.armbian.com/index.php/topic/371-cubietruck-uart-3-4-7-pin-out-serial-ttys/ I follow the step described here: http://www.armbian.com/using-armbian-tools/ But when I run the compile.sh script, I don't found banapim1 in the list of device, I see banapim2, bananapipro, banapim2plus but not my deice. Could you indicate which ne must be selected? Thank you

Download sunxi-tools tool: git clone git://github.com/linux-sunxi/sunxi-tools.git cd sunxi-tools make ...yadayada you might have errors but look for "sunxi-fexc" cp /boot/bin/orangepipcplus.bin . sunxi-fexc -I bin -O fex orangepipcplus.bin orangepipcplus.fex nano orangepipcplus.fex Line 354: (yours may be different.) hdmi_used = 1 to hdmi_used = 0 Convert back to .bin with: sunxi-fexc -I fex -O bin orangepipcplus.fex orangepiEES.bin cp orangepiEES.bin /boot/bin/ cd /boot/bin/ mv orangepipcplus.bin orangepipcplus.not mv orangepiEES.bin orangepipcplus.bin reboot

Hi, I'm using my NanoPi NeoAir as a bluetooth streaming sink and as a webserver for several configurations and monitoring of the device. Bluetooth works fine as long as I don't disable the powersafe mode of wifi. Even in powersafe mode the bluetooth performance is not the best. If I disable wifi at all the bluetooth performance is great. My system is: Ubuntu 16.04.3 LTS 4.11.2 iwconfig: wlan0 IEEE 802.11 ESSID:"Teebeutel" Mode:Managed Frequency:2.412 GHz Access Point: 2C:41:38:FB:D7:30 Bit Rate=54 Mb/s Tx-Power=31 dBm Retry short limit:7 RTS thr:off Fragment thr:off…

Hi guys I have an OPi1 with armbian 5.83 kernel 4.19 and I can't use otg. It seems powered but it doesn't recognize anything. I read this topic but I can't understand what to do. I just want to attach an external storage or a wifi dongle, to avoid using an usb hub. So I think I shoud use the otg as host for what I understood, right? thank you in advance for any help

Hello. Somehow TX on UART 3 is not working. I connected USB-UART converter or the Banana Pi Zero M2 UART 3 Pins (as it shown here https://bananapi.gitbook.io/bpi-m2/en/bpi-m2_gpio_pin_define), set Baud rate, but I can't send anything from the SBC to PC. But I can send messages from PC to Banana pi. The converter is working properly(tested on Arduino). Do you have any ideas why? Physically nothing looks damaged, wires are soldered accurately and correctly.... Some system info $ uname -r 6.1.2-sunxi $ cat /etc/os-release PRETTY_NAME="Armbian 23.02.0-trunk Jammy" NAME="Ubuntu" VERSION_ID="22.04" VERSION="22.04.1 LTS (Jammy Jellyfish)" VERSION_CODENAME=jammy …

I just built the latest OPi Win image and WOW ... just about everything seems to be working. I'll test it over the coming days but AWESOME work guys. Wifi is back, eth0 is back and HDMI works !!!!! I've not tried any kind of GUI yet but I can get a console prompt on the TV & see the kernel boot messages Now for more testing, testing & testing .... TB

6.960880] zram1: detected capacity change from 0 to 506638336 [ 7.108492] asoc-simple-card soc:sound: i2s-hifi <-> 1c22800.i2s mapping ok [ 7.821162] random: crng init done [ 7.821171] random: 7 urandom warning(s) missed due to ratelimiting [ 7.897054] Adding 494760k swap on /dev/zram1. Priority:5 extents:1 across:494760k SSFS [ 7.995324] zram0: detected capacity change from 0 to 52428800 [ 8.134498] EXT4-fs (zram0): mounted filesystem without journal. Opts: discard [ 11.299194] dwmac-sun8i 1c30000.ethernet eth0: PHY [0.1:01] driver [Generic PHY] [ 11.299222] dwmac-sun8i 1c30000.ethernet eth0: phy: setting supported 00,00000000,000062cf advert…

Today I did update my 3 NanoPi Neo2 via apt update/upgrade, but only one is accessable via ssh after the update. (without SSH/SSL-conect also no conection via SFTP/WinSCP because if the timeout) The one which is accessable has after the update Welcome to Armbian 23.02.2 Bullseye with bleeding edge Linux 6.7.12-edge-sunxi64 ( Machine model: FriendlyARM NanoPi NEO 2) The two other do show prompts for user/password but doesnt login via ssh - and after some time they time out and I can reenter user/password After connecting via TTL-serial I can also enter user/password and then the Neo2 shows me: _ _ ____ _ _ _ …

Subject: Fix for eMMC Internal State Deadlock / Power-Loss Recovery Failure on Allwinner (sunxi) platforms (Banana Pi P2 Zero) Hi Armbian and sunxi developers, I would like to share an industrial-grade diagnostic report and a 100% verified solution regarding a severe, reproducible boot deadlock on Allwinner H2+/H3 platforms (specifically tested on Banana Pi P2 Zero) utilizing onboard eMMC. === 1. SYMPTOM === During rigorous power-cycling stress tests (hard power-off during random kernel init/write phases), the system randomly bricks on subsequent boots, showing a "dropping to shell" (initramfs / BusyBox prompt) or failing completely during the U-Boot phas…

I am trying to use an Iono Pi Board from SFERA Labs on an OrangePI PC Plus. https://www.sferalabs.cc/product/iono-pi-board/ I was able to get i2C working so that I could connect to some devices like a temp sensor and accelerometer. My issue is pretty basic at this point. I am simply trying to blink the green light on the board. According to docs, the onboard LED is connected to GPIO7. So through looking at documentation I was able to decipher that GPIO7 is physical pin 7 on an RPi. I am using pyA20.gpio. Accordingly Pin 7 = PA6. However when I set PA6 high the light does not come on. Am I missing something? Anyone have expe…

hello Igor, way i can`t download https://dl.armbian.com/orangepizeroplus2-h5/Bionic_current ??? can you update link?

How can I disable the auto login as the root user in the cubietruck ubuntu (XFCE)? That does not sound a good idea. How could I auto login with a different user? The GUI settings editor "display chooser" inside Session Startup doesnt work. I've been looking around how to do that, but in this case I cant find the config file which was supposed to be inside /etc/lightdm/ Thanks and congratulations for your work.

Hello, I bought Orange Pi Plus 2 and I have a banana router r1 on both devices I installed armbian it works good but I need just server + nginx + lua could you please help me, how to reduce the size of installed OS because 1.6Gb its too much Thank you

Hello! I try use UPort 1150 on my OrangePIPC+ board, but got error misiing firmware. After lookup I check that this files was missed, so I copy from RaspberryPi4 board (with Armbian 22.04) moxa folder & ti_3150.fw, ti_5052.fw. Then after reboot all work ok. So, is this that I missed in configuration or this is a bug? Regards, Alex

Hello, I am trying to use my NanoPi neo Plus 2 rev 1.2 board as KVM with help of (kvmd-armbian) and USB-HDMI capture card and USB-A to USB-A cable as OTG for emulation of Keyboard and mouse as HID. I discoverred that If I install "Armbian 23.02 Jammy with Kernel 5.15.y" like the install script from srepac/kvmd-armbian recommends, updated it and installed the srepac/kvmd-armbian piKVM, it installed properly and it is working BUT to my OTG USB HID connection to work I had to convert sun50i-h5-nanopi-neo-plus2.dtb to sun50i-h5-nanopi-neo-plus2.dts and in there find "dr_mode" and change it to peripheral (or otg) to get my HID OTG input to work w…

Is it a way to reduce the amount of reserved memory on sunxi64 devices? Trying to remove all useless for my case features (video/audio/wireless) to free up memory/resources for other tasks. The amount of total (413M) vs real (512M) memory is quite low: # grep -e Mem -e Cma /proc/meminfo MemTotal: 422416 kB MemFree: 49620 kB MemAvailable: 314396 kB CmaTotal: 0 kB CmaFree: 0 kB # dmesg | grep Memory: [ 0.000000] Memory: 407924K/524288K available (14144K kernel code, 1456K rwdata, 8700K rodata, 3072K init, 521K bss, 116364K reserved, 0K cma-reserved) # grep extraargs /boot/armbianEnv.txt extraar…

I am lost, the soundcard used to work when I first started with this board but now I get a "aplay: device_list:270: no soundcards found..." error. When I tried to enable the analog codec using armbian-config I get an empty screen. This also used to work the first time. So I created a new SD card using Armbian Stretch this time but with exactly the same result. I am desperate! The diagnostic output is here http://ix.io/1x25 Kind regards, Hans C

I updated my system to the newest kernel and lost all WiFi. What is the deal???

Hello, I recently received my first orange pi. When I shutdown lite from armbian menu, yellow light does not turn off. The only way to make it turn off is remove the power plug. Is this normal? Also, I can't restart armbian by pressing the power button after shutting down. I have to unplug and plug the power cable for restart every time. Is that normal too?

hello, i got a really big deal with a beelink x2, i cant erase andoid in order to run armbian completly with out SD card any idea? another problem is the wifi, the beelink wifi is not scanning anything, can you help me?

Hello everybody, I'm pretty new to Armbian and H3 boards. I own an Orange PI + 2 board brought more than 1 year ago, yesterday I started to play around with it and I've discovered that for some reason its Mali GPU doesn't support OpenGL ES and it's somehow related to it having 2 GB of RAM on board. I'm really not sure how it can be related, but that's what Armbian's changelog for v5.20 says: Later in v5.25 it says: So I just want to know if 2GB boards feature OpenGL ES support (as well as HW video decoding etc)? I tried to run glxheads, glxgears etc from mesa-utils package, but got some really poor FPS there + some games I used for …

Hello, did anyone manage to get Teamviewer host working on Orange Pi PC (H3) and Armbian? It installs ok, i can start the program but i cannot login to my account and when i set permanent password it shows No Connection and i cannot see the ID. Thanks!

Hello, I try to communicate via SPI, if i try receive data over SPI on MISO pin I got message without last bit so I should receive 0x23 and i got 0x22. SPI is set on MODE 3. It has same behaviour on PI PC and PC2. If i try on RPi it works fine. Do you have anybody some advice ? Regards Jan

How is i2c1 and i2c2 mapped on Nanopi Duo? I can configure in armbian-config, but all the Duo pin diagrams only show i2c0.

Hello. I decided to build an original image for my Fly Pi board. HDMI output not working. The image is shown only when loading Uboot, and then turns off and a black screen appears. Here are the logs: https://ix.io/4EWM DISPLAY=:0 xrandr output: can't open display :0 X org log: https://paste.debian.net/1290516 I'm confused and don't know what to do...

Hi, i'm using Armbian on my Cubieboard 1, i've done the kernel upgrade with apt-get update && apt-get upgrade. I haven't understood how to make a full system update, including the security updates. Thanks and wonderful work!

Good afternoon dear experts. I have a problem on my Orange pi plus 2. My hard drive(WD Red WD10JFCX, 1Тб, HDD, SATA III, 2.5") is periodically switched-off (/dev/sda1). in ravines I have: Sep 28 10:48:37 PM dvr kernel: [1678371.474389] ehci_irq: highspeed device disconnect Sep 28 10:48:37 PM dvr kernel: [1678371.474593] usb 3-1: USB disconnect, device number 2 Sep 28 10:48:37 PM dvr kernel: [1678371.479539] Buffer I/O error on device sda1, logical block 76682192 Sep 28 10:48:37 PM dvr kernel: [1678371.479581] Buffer I/O error on device sda1, logical block 76682193 Sep 28 10:48:37 PM dvr kernel: [1678371.479609] Buffer I/O error on device sda1, logical block 76682194 …

Hi, I try to create a mural display monitor to show rss flows I have an orange pi pc plus with armbian installed on EMMC and a RVB monitor with an RVB/HDMI adapter. I don't want the monitor to be ON permanently (for monitor longevity and energy savings) So I plan to have an IR sensor to detect human presence and set the monitor on/off My prefered option would be to use the GPIO for the sensor. My DPMS configuration is : Section "Monitor" Identifier "Monitor0" Option "DPMS" "true" EndSection Section "ServerFlags" Option "BlankTime" "0" Option "StandbyTime" "0" Option "SuspendTime" "0" Option "Of…

I am planning a project for a few Orange Pi Lites as multimedia devices. I have been testing applications on the Lite with it unenclosed, and without a heatsink and haven't seen any issues with heat so far (running at 1.2 GHz). Is there a general consensus on if this board should have a heatsink when clocked at 1.2 GHz (and is enclosed)? The intended case design has vents.

I have read other thread regarding v4l2loopback kernel module installation. I got same problem like this message below ========================================= ------------------------------ Deleting module version: 0.10.0 completely from the DKMS tree. ------------------------------ Done. Unpacking v4l2loopback-dkms (0.10.0-1) over (0.10.0-1) ... Setting up v4l2loopback-dkms (0.10.0-1) ... Loading new v4l2loopback-0.10.0 DKMS files... dpkg: warning: version '3.4.113-sun8i 4.19.25' has bad syntax: invalid character in revision number Building for 4.19.20-sunxi64 Module build for kernel 4.19.20-sunxi64 was skipped since the kernel…

Hi there, i needed to recreate my cubietruck as a VDR with a brand new image. I´ve choose the plain http://mirror.igorpecovnik.com/Armbian_4.2_Cubietruck_Debian_jessie_4.1.6.zip image to install but after booting it got stuck at "Welcome to Debian GNU/Linux 8 (jessie)!" and after many minutes " (TIME) Time out waiting for device dev-ttyS0 device. (DEPEND) Dependency failed for Serial Getty on ttyS0." appears. I downloaded the 3.4.108 kernel image which installed and ran ok apart of that the USB connection dropped after a while which is a problem for my VDR: [ 8.301636] eth0: PHY ID 001cc915 at 0 IRQ 0 (sunxi_gmac-0:00) active [ 8.306840] eth0: PHY ID 001cc915 a…

Are the old releases of Armbian available anywhere? I can't find them.

Hey there, I'm getting a dpkg-deb error when trying to perform an upgrade with apt-get: Extracting templates from packages: 100% Preconfiguring packages ... dpkg-deb: error: archive '/var/cache/apt/archives/base-files_8+deb8u7_armhf.deb' has premature member 'control.tar.gz' before 'control.tir', giving up dpkg: error processing archive /var/cache/apt/archives/base-files_8+deb8u7_armhf.deb (--unpack): subprocess dpkg-deb --control returned error exit status 2 Errors were encountered while processing: /var/cache/apt/archives/base-files_8+deb8u7_armhf.deb E: Sub-process /usr/bin/dpkg returned an error code (1) This is happening to any package at the moment. Never see…

Machine model: Banana Pi M2 Berry Linux bpi08 6.2.7-sunxi #3 SMP Fri Mar 17 07:58:04 UTC 2023 armv7l GNU/Linux (armbian@next) Mir ist es nicht möglich eine interne Temperatur auszulesen. Brauche dringend Hilfe! Der Link“/etc/armbianmonitor/datasources/soctemp “ exitiert zwar, nur die Datei / das Verzeichnis existiert nicht: nicht vorhanden → /sys/devices/virtual/thermal/thermal_zone0/temp nicht vorhanden → /sys/class/thermal/thermal_zone1/temp Wo soll diese Dateien überhaupt erstellt werden? Anmerkung Es wäre schön, wenn es für den Banana Pi M2 Berry eigene Tags geben würde. Er unterscheidet sich von dem Banana Pi M2+.

I built an image for the `orangepi-z-2w` via `./compile.sh build BOARD=orangepizero2w BRANCH=current BUILD_DESKTOP=no BUILD_MINIMAL=no KERNEL_CONFIGURE=no RELEASE=bookworm`. The wifi connects (shows as active), however, I am unable to get on the internet (pinging results in `network is unreachable`, also can't ping the device itself). Am I building wrong? Thanks! Some notes: - I've been using `Armbian_24.2.6_Orangepizero2w_bookworm_current_6.6.28.img.xz` in the past (downloaded from armbian.com), and the wifi works just fine.

I installed Armbian on my Orange Pi Zero 2W—my first time doing this—but the keyboard doesn't work when I connect it via the USB-C adapter I'm using. I considered an SSH connection as an alternative, but I don't know how to set it up without a keyboard, nor do I know how to configure Wi-Fi and SSH settings via the SD card. Please help.

Hi, I'm very happy to have my OrangePi Zero working (at last!) with Armbian. It looks like docker installed properly on the latest Armbian Stretch mainline kernel 4.14.y, but for some reason, it won't start. Here are the logs I have: systemctl enable docker Synchronizing state of docker.service with SysV service script with /lib/systemd/systemd-sysv-install. Executing: /lib/systemd/systemd-sysv-install enable docker root@orangepizero:~# systemctl start docker Job for docker.service failed because the control process exited with error code. See "systemctl status docker.service" and "journalctl -xe" for details. root@orangepizero:~# systemctl status d…

I have good temps and was thinking to overclock it but have no idea how to do it.

Hello ! In my project I need use 2 spi bus : /dev/spidev1.0 and /dev/spi2.0 /dev/spidev1.0 for 3.5inch rpi display and /dev/spidev2.0 for 8x8 led matrices, such as MAX7219-8x32-MCU-Drive-LED If I am use legacy kernel (3.4.113-sun7i) both spi buses work well But if use mainline kernel (4.14.18-sunxi), I can use only 1 spi bus This is my armbianEnv.txt: overlays=spi-spidev spi1 spi2 param_spidev_spi_bus=1 In this case I can use /dev/spidev1.0 If I set param_spidev_spi_bus=2 I can use /dev/spidev2.0 How to enable 2 spi buses at the same time ?

Im using armbian stretch on an Orange Pi Zero Plus. On normal boot up, the system hangs at starting version 232 for around 1-2 minutes. After this the system procedes to boot normally. What is this delay time and is there any way I can remove it?

Help me! 1. I was downloaded images from https://www.armbian.com/orange-pi-prime/ 2. then write to SD Card (32Mb) using Etcher (i was try Ubuntu and Debian) 3. insert card, turn on power, begin loading 4. but i see "starting kernel" message and loading stopped! Why?

For information purposes, that the 1.3-inch SH1106 OLED connected to I2C on OZPI v3 works very well OLED connected to PIN 3 of SDA and PIN 5 of SCK and in armbian-config in HARDWARE set to [*] i2c3-ph Using tools i2cdetect -y shows that the OLED is at address 0x3c All Python code with the adafruit library works fine

Hello! Is there any hope to acquire a r3p2 or a newer Mali driver support in an armbian kernel for Banana Pi?

Hi, i'm new on this forum. I have compiled u-boot 2017.3 and Mainline 4.14 for my own for Olimex-olinuxino-micro-emmc - and it is runnig ;-) But when i reboot the board, u-boot hangs with: U-Boot SPL 2017.03+ (Oct 03 2017 - 18:24:31) DR Only reseting or repowering helps. any ideas?

I am having some difficulty producing audio on an orangepi zero using the images listed here: https://www.armbian.com/orange-pi-zero/ No matter what I do, I cannot get any audio devices to show up in /proc/asound/cards There are a number of posts on here that suggest that audio doesn't work on version 4.x kernels. Is this still the case? And if so, where can I download an armbian image that does support audio?

It seems I have to install either of them for my chromecast to play nice. I have no prior experience with neither of them nor do I know which one is better. There are various threads on the internet but would be interested which one the community uses / trusts, cause I am a bit hesitant on adding random repos. My use case: Stream mkv on local with subs or transcode if it can't show subs. Board: Orange Pi Pc OS: Debian Stretch on 4.14.18 Would appreciate any feedback even if it's only a link to your preferred software / guide.

Hello, I'm using a Banana Pi P2-Zero based on H3 and I want to get Ethernet running. To no avail so far... When building the image, I use this parameters: BOARD=bananapim2zero BRANCH=current RELEASE=jammy BUILD_MINIMAL=no BUILD_DESKTOP=no I use the customize-image.sh script, but I don't change anything related to the drivers (or so I think). There are no patches, overlays or anything like that. I saw this topic but this solution doesn't help: I also tried something like this but it didn't help either: /dts-v1/; /plugin/; / { compatible = "allwinner,sun8i-h3"; fragment@0 { target = <&emac>…

Under kernel 4.9, using a usb3.0 to Gigabit interface with RTL8153b card, the upstream and downstream speed can reach Gigabit. But with kernel5.10, the speed can't reach gigabit, and the driver file has been changed to the latest version, but still no effect. kernel5.10 Speed measurement root@orangepi3-lts:~# iperf3 -c 192.168.3.201 Connecting to host 192.168.3.201, port 5201 [ 5] local 192.168.3.146 port 44376 connected to 192.168.3.201 port 5201 [ ID] Interval Transfer Bitrate Retr Cwnd [ 5] 0.00-1.00 sec 24.8 MBytes 208 Mbits/sec 0 147 KBytes [ 5] 1.00-2.00 sec 23.5 MBytes 198 Mbits/sec 0 147 KBytes [ 5] 2.00-3.00 sec 23.5 MBytes 197 Mbit…

Hello, Can i use a 8TB hdd with orange pi plus 2? Is there any hardware / sotfware limitation, or i do something wrong? Armbian sees only 1.40 TB of 8 TB. I started from: https://www.armbian.com/orange-pi-plus-2and downloaded the jessie server. root@orangepiplus:~# uname -a Linux orangepiplus 3.4.112-sun8i #10 SMP PREEMPT Sun Oct 23 16:06:55 CEST 2016 armv7l GNU/Linux root@orangepiplus:~# dmesg |grep "sda\|scsi" [ 1.293990] scsi0 : usb-storage 3-1:1.0 [ 2.293196] scsi 0:0:0:0: Direct-Access ST8000AS 0002-1NA17Z 0009 PQ: 0 ANSI: 0 [ 2.295330] sd 0:0:0:0: [sda] 2743151276 512-byte logical blocks: (1.40 TB/1.27 TiB) [ 2.296410] sd 0…

Hi, I’m curious how to boot into command line rather than the GUI desktop when booting up. I have looked at some other answers where changing the `nodm` but that file does not exist. Thanks!

Hello, I have problem with "Orange Pi Zero Plus" and functionality of Relay module (electrical circuit= normally closed). Relay module is attached on pin/port number "0". When I set up pin number "0" from "OFF" to "OUT" state with command: gpio export 0 out state is changed from OFF to OUT and parameter in column "V" is "0". It should mean that relay stays turned of. +------+-----+----------+------+---+ | GPIO | wPi | Name | Mode | V | +------+-----+----------+------+---+ | 12 | 0 | SDA.0 | OUT | 0 | Problem is, that relay immediately after execution of mentioned command enables(turns on) output electrical circuit. Relay m…

Hello, does this USB WiFi card work with armbian on Orange Pi 3 LTS? TP-Link Nano AC600 USB Wifi Adapter https://www.amazon.com/dp/B07PB1X4CN/ Does it need any drivers to be installed? If yes, is there any that is working with OPi 3 LTS? Btw I want to use this wifi adapter, because Armbian doesn't work with internal wifi card in this SBC - https://forum.armbian.com/topic/23505-orange-pi-3-lts-no-wifi/ (and sadly Devs didn't release a fix for it)

When 40pin female-female cable connected to my Orange Pi Plus 2 GPIO voltage on pin1 decreasing from 3.3v to ~ 1.6v WAIDW? Spoiler

Hi, I'm trying to interface a USB module via the usb pins (USB-DM2 and USB-DP2 - Pin 3 and 4 on the 13-pin header) and powered by the 5V and GND pin (Pin 1 and 2 on the 13-pin header) on the Orange Pi Zero board. During startup/reboot of the Orange Pi Zero, the module fails to get recognised and come up( output of lsusb and dmesg do not show any usb devices). The module, however gets recognised and works fine when plugged out and back in. Are there any extra steps that I have to take in order to make the module get recognised during bootup? Any help regarding the matter would be appreciated. Thanks in advance!

Hello, in my installation all works fine and smooth. But after tryout of exagear (install and purge) my soundcard is not available any more (SPDIF). MPD/MPC is working well, but not sound out. apt shows a up-to-date system. aplay -L shows only pulseaudio server. lsmod : see my attached file lsmod.out. Any idea to bring sound back without any reinstallation? Thanks for for any idea to solve my problem Best regards, Martin

Hi. I am hoping to connect this type of IR receiver to my NanoPi Neo. https://www.jaycar.com.au/arduino-compatible-infrared-receiver-module/p/XC4427 I am hoping that all I need to do is connect 5v, ground and signal to the IR receiver pin to pin 6 on the header. Can anyone help me with the software and what I need to do to install lirc so the IR receiver is recognised? TIA V.

Hello, I'm new to working with Armbian and Linux in general, but I have a HiLetgo VK172 G-Mouse USB GPS/GLONASS USB GPS receiver connected to my Orange Pi PC. When I open it with MINICOM, I get a response, but it doesn't give me the coordinates: $GPGSA,A,1,,,,,,,,,,,,,99.99,99.99,99.99*30 $GPGSV,1,1,01,27,,,22*7D L,,,,,203410.00,V,N*4E $GPRMC,203411.00,V,,,,,,,031223,,,N*79 $GPVTG,,,,,,,,,N*30 $GPGGA,203411.00,,,,,0,00,99.99,,,,,,*63 ... But I want to open it for serial communication in /dev/ttyACM0. Thank you very much, and any help you can give me would be appreciated.

Hello First, sorry for my English Second, the problem... I have an Orange PI Zero 3, 4gb I install the OS without any problem, the image I use is the following: "Armbian_23.08.0-trunk_Orangepizero3_bookworm_current_6.1.31-1GB-2GB.img" I configure the network with the program "nmtui", everything is fine. I enter through ssh since the screen is not detected through HDMI, I do an apt update and then apt upgrade... everything seems correct, until I do a reboot... my Orange Pi does not start anymore. I am interested in installing openmediavault, that is why I resort to a debian image. What is the problem? I am not using the correct image? I need your help