Allwinner sunxi

Hi all, I wrote this dts to enable a high PG12 pin int the Bananapi M2P H3 can it be okay? /dts-v1/; /plugin/; / { compatible = "allwinner,sun8i-h3"; fragment@0 { target = <&pio>; __overlay__ { bt_pins:bt_pins { allwinner,pins = "PG12"; allwinner,function = "gpio_out"; }; }; }; fragment@1 { target-path = "/"; __overlay__ { bt: bt { compatible = "gpio-bt"; gpios = <&pio 6 12 1>; }; }; }; };

Today I re-installed my Cubietruck as it was really outdated. It had: Linux cubietruck 3.4.105-cubieboard #8 SMP PREEMPT Fri Jan 23 06:11:42 EST 2015 armv7l GNU/Linux still running without issues. I reformatted the SD card with: ARMBIAN 5.65 stable Debian GNU/Linux 9 (stretch) 4.14.78-sunxi Configured everything and now I want to move the data to my SSD. (just as I had before) However dmesg shows me: cubietruck ata1: SATA link down (SStatus 0 SControl 300) What did i miss??

So I click load desktop and it completes that but when I try to enable it asks me if I want to enable autologin and it doesn't matter if I choose yes or no it just says killed, what's wrong? , i have an internet connection

I have an orange pi light I loaded two sd, one 16GB and one 32GB with "Armbian_5.35_Orangepilite_Ubuntu_xenial_default_3.4.113_desktop.img" I can not see any mistakes in the console: https://pastebin.com/HXyeQkjr I tried various resolutions. Still, the screen remains red and nothing appears.

The translation was done by Google Hello friends, my hardware: Orangepi pc plus dac-pcm5102mk-i2s. 3.5 "touch display So far I have the system in eMMC (ARMBIAN 5.60 stable Ubuntu 16.04.5 LTS 3.4.113-sun8i) and optionally on 16GB uSD card (ARMBIAN Debian GNU / Linux 8 (jessie) 3.4.113-sun8i). In both cases, an xfce desktop is installed. The setup of the DAC I have after the tutorial I2S on Orange Pi H3 by Da Alchemist, February 29, 2016 in both Debian 8 and Ubuntu 16.04. Works well. I installed the display after the hints from How to use Touchscreen + LCD on H3 devices by kutysam, July 31, 2017. It claps with the display of the desktop, but the touch …

Hi. When you install RPi monitor on a board using legacy 3.4 kernel (in my case, Orange Pi Plus2e), you can notice an error message in the "Memory" section of the web interface, as well as a very weird big number of used memory. That is caused because it tries to read some value from /proc/meminfo (named "MemAvailable") that wasn't implemented in that version of the kernel (I think it was implemented in 3.14, if I remember well). So I have made a custom version of the memory module, which gets the value for used and available memory using the same algorythm as HTOP, which has been many years around being very useful. I am attaching the file "memory_legacy…

Hi there, I have been trying Armbian Buster for the first time. On the first look everything works fine and quick. But I cannot get proper sound from the soundcard. Instead there is only random noise. Interestingly the speaker-test works fine in stereo. $ uname -a Linux teres-a64 5.4.28-sunxi64 #20.02.7 SMP Sat Mar 28 17:25:10 CET 2020 aarch64 GNU/Linux $ aplay -l **** List of PLAYBACK Hardware Devices **** card 0: sun50ia64audio [sun50i-a64-audio], device 0: 1c22c00.dai-sun8i sun8i-0 [1c22c00.dai-sun8i sun8i-0] Subdevices: 1/1 Subdevice #0: subdevice #0 $ speaker-test -twav -c2 -Dhw:0 speaker-test 1.1.8 Playback device is hw:0 S…

Dear All, I am just trying to figure how to enable the UART3 to be a 4 wire serial port for Lamobo R1 board. As per the datasheet here, https://drive.google.com/file/d/0B4PAo2nW2KfnNTBaVENGeHZfSzA/view UART3 4 wire signals are routed to J12 connector. I was looking to modify .dtb file, when I realize there is a definitions for PH3 GPIO under DTB file such as usb2_vbus_pin@0 { allwinner,pins = "PH3"; allwinner,function = "gpio_out"; allwinner,drive = <0x0>; allwinner,pull = <0x0>; linux,phandle = <0x42>; phandle = <0x42>; }; PH2 is not defined, looking at schematic I cannot find how VBUS for US…

Very minor niggle, got a ZeroPi today and of course it will run Armbian, after doing the mandatory apt update && apt upgrade I was greeted with a banner saying xt-q8l-v1 instead of ZeroP when logging back in after rebooting for the kernel update. Not sure why it's confused. I used the Buster Minimal image from the ZeroPi download page. root@zeropi:~# cat /etc/armbian-release # PLEASE DO NOT EDIT THIS FILE BOARD=xt-q8l-v10 BOARD_NAME="xt-q8l-v10" BOARDFAMILY=rockchip BUILD_REPOSITORY_URL=https://github.com/armbian/build BUILD_REPOSITORY_COMMIT=1ac5f7ac VERSION=5.95 LINUXFAMILY=rockchip BRANCH=default ARC…

1. hardware: orange pi zero /H2+ 512Mb 2. armbianmonitor -m got a negative temperature number。 Time CPU load %cpu %sys %usr %nice %io %irq CPU C.St. 17:34:31: 240MHz 0.10 1% 1% 0% 0% 0% 0% -16°C 0/7 17:34:36: 240MHz 0.09 1% 1% 0% 0% 0% 0% -16°C 0/7 17:34:41: 240MHz 0.09 1% 1% 0% 0% 0% 0% -16°C 0/7 3. uname -a Linux opizero 3.4.113-sun8i #4 SMP PREEMPT Wed Nov 22 13:45:28 CET 2017 armv7l GNU/Linux 4. using image Armbian_5.35_Orangepizero_Debian_jessie_default_3.4.113.7z

I just want to post a thank you to the developers and contributors who have built one NICE distribution. Over a year ago I bought a few OPi PC as a possible replacement for Raspberry Pi based HAM radio projects I support. To say I was disappointed in the distribution from the manufacturer is a understatement. Without Loboris stepping up and getting something usable I would have tossed them in the trash and moved on. Last night I downloaded and installed Jessie server from Armbian. What a pleasure. Small, clean and a giant plus for me, HEADERS!!!!. I am so tired of having to build the headers for a kernel so I can compile the out of tree modules I need. I just ordered a f…

Hello Dear all, I dont really understand why netplan is renderer: NetworkManager I try to put wpa_supplicant.conf but does not work. I have add my profile in /etc/NetworkManager/system-connections/ and test to connect with armbian-config it work. But, I don't know how to make my system automatically connect to wifi this way? Many thanks in advance for help.

Because today I did get my Black-Friday NanoPi Neo2 LTS 1GB I swapped my old Neo2 against this new 1Gb LTS-version. After assembling the new LTS to the fresh heatsink I did a testdrive and all went fine (network etc). So I did try to put the faceplate back on the case but it doenst fit. At the time when I did buy the case there was also a faceplate for the normal H3 Neo delivered. So for the new LTS Neo2 I had to use the faceplate for the H3-Neo, because the new LTS Neo2 has the USB-Port aligned like the H3-Neo . The old Neo2 has his USB-Port (on the main Neo2-PCB) a bit shifted against the Network-port. Also the new LTS …

How can i use multiple microphone with Orange Pi Zero to make voice enable device?

Good day! I'm using latest armbian build for orange pi lite (Armbian_community 25.2.0-trunk.86 Bookworm). Tried to connect anything to OTG USB port (mouse, flash drive), but it didn't work. DMesg was silent. Had 4 USB devices: [ 1.683435] usb usb1: Product: EHCI Host Controller [ 1.699369] usb usb2: Product: EHCI Host Controller [ 1.727339] usb usb4: Product: Generic Platform OHCI controller [ 1.729832] usb usb3: Product: Generic Platform OHCI controller Then I followed this guide https://github.com/carl1961/Orange-PI-Lite-Usb-OTG-to-Host And I had 5th one after this: […

Hi everybody! I am new to this community and I am trying to find out if anyone here with a NanoPi Neo Air board got bluetooth working on Armbian Buster (mainline based kernel 5.10.y). Here is the armbianmonitor -u log http://ix.io/2UKF For about one week I am trying to make bluetooth work and with no result. I tried also Armbian Focal (mainline based kernel 5.10.y) and the results are the same. Bluetooht not working/recognized. I mention that I enabled BT support from armbian-config. dmesg | grep blue empty result rfkill list 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no The images were compile…

Is there any way I can make use of the VDPAU implementation for A20 with the mainline kernel? Or will I have to use the old 3.4 kernel? Thanks Paul

Hello I have a little problem with the usb devices, i use usb camera and if u plug the power supply to the OPI Lite board (5.25) it recognize the camera but it doesn't work well (stream with like 8-10 fps), after a software reboot, the device go to other Bus and the camera work fine with 15-30 fps stream. Before reboot, exact on first power of the board: Bus 006 Device 002: ID 058f:3822 Alcor Micro Corp. Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 002: ID 0bda:8176 Realtek Semiconductor Corp. RTL8188CUS 802.11n…

As I reported yesterday, after an upgrade, wifi was lost. Although wlan devices were visible via ifconfig, no connection to AP was possible. (8192cu driver) Today I tried to have fresh Armbian build , got a 5.23 jessie login as: root root@192.168.1.15's password: _ _ ____ _ _ _ | \ | | __ _ _ __ ___ | _ \(_) | \ | | ___ ___ | \| |/ _` | '_ \ / _ \| |_) | | | \| |/ _ \/ _ \ | |\ | (_| | | | | (_) | __/| | | |\ | __/ (_) | |_| \_|\__,_|_| |_|\___/|_| |_| |_| \_|\___|\___/ Welcome to ARMBIAN Debian GNU/Linux 8 (jessie) 3.4.112-rt143-sun8i System load: 1.31 Up time: 3 min Memory usage: 15 % of 490Mb IP: …

To replace my dead home server (which was just a dead laptop anyway), I picked up an Orange Pi PC for cheap locally. After solving power supply issues, I tested GUI and media performance on the board, with an aim to perhaps use the composite out for emulation, before concluding that this wasn't the best choice for the board. (That, and it'd kill my performance for the more useful server aspects.) While technically impressive, it wasn't really worth it when my PC is right there for me to use to play those video files I would on the board. Looking into the matter, it seems the ideal solution for a file server would be to install the Mainline kernel to benefit fr…

vmware 12, Ubuntu 16.04: ./compile.sh, then select WIP version, orangepi lite2, the dialog exited, and message under in terminal: Error: Expected at least 5 tokens for --menu, have 4. Use --help to list options. [ error ] ERROR in function source [ main.sh:188 ] [ error ] No kernel branch selected

Hi List, I have a cb2 with armbian kernel 4.9.12. I need to change some things in the kernel to use ptp. However I seem not to be able to download the kernel sources> sudo apt-get source linux-image-next-sunxi gives me the E: Unable to find a source package for linux-4.9.12-sunxi Error. I checked the directions for /etc/apt/sources.list.d/armbian.list but that was already in place Am I missing something?? Tx for any pointers! Jer

I'm trying to set up one of my Orange PI Zero to be a MPD Player and in parallel to play streams from other devices over network. The streams are provided by a Ubuntu desktop PC and and a Librelec PC. The Orange Pi Zero is running Armbian 5.38 with Kernel 4.14.18. I tried the last days two solutions: ALSA dmix plugin playing everything except network streams and Pulseaudio for nework streams Playing everything through Pulseaudio in system mode The first solution failed as the dmix plugin in ALSA has poor performance and causes regularly high CPU load resulting in broken audio playback with MPD The second solution seemed to be better s…

Hi there, I want to build my product on Orange Pi Zero Plus2. I want to put it to enclosure and leave just power connector accessible. But I found this scenario - if user makes mistake in his wifi settings and then he saves these "faulty wifi settings", he will not be able to recover default wifi values anymore. How would you solve this? (the best approach without any additional buttons for gpio pins or additional elements)

I want to completely disable display subsystem on Orange Pi Zero LTS (Debian 12 (Bookworm) minimal/IoT build 1 oct 2024). I blacklisted the GPU modules (lima, gpu_sched, drm_shmem_helper), but i can't find a way to disable sun4i-drm. Is there a way to disable it completely w/o recompiling the kernel?

Hello! How are you? I have OPI PC PLUS running ubuntu xenial desktop. I want to use it how pc / thin client. Is it possible OPI runs youtube videos? I tried run youtube from Firefox and Chromium but without good quality. After reads some opi foruns, seem possible run videos with Kodi or Openelec. I did install kodi: sudo apt-get install kodi The instalation is ok, but when I try run Kodi, it does not works, give me only errors. I read too that Openelec can be good than Kodi in OPI. I need to install some media player service that runs together ubuntu xenial and not only how OPI station media player because I want work OPI how pc station. I can not …

Hello everyone. I would like to create an update system, which via a link on a web page, will check on an ftp server and if a version is newer, download the img file and install it. it is the installation part that poses me big problems. to write an img on the sd we must use the command dd if = ..... of = ...... But since the sd is used it does not work. I had thought of going through berryboot but a priori it is not functional on the m2. If someone has an idea thank you

Setup: Orange Pi One 16Gb SD card Running Armbian Stretch (Mainline Kernel 4.14) Using XFCE4 Desktop Environment eGalax Touch based 1503M 15 Inch 1024*768 Monitor HDMI (IN - FROM Pi) to VGA (OUT - TO MONITOR) Adaptor I have the monitor setup and working, everything boots through to XFCE however the touch panel is inverted and the 'active area' is smaller than the screen. Although the touch panel is responding I have the following issues X and Y crossed over Both Axis Inverted roughly 2cm 'Dead Zone' on the perimiter of the screen I have attached it to my laptop and the sc…

I tried for several days to install from the download page with a very difficult OS.. until I noticed that the download for orange pi pc was actually meant for orange pi pc plus.. I found the right download by searching for it but maybe someone can fix the link on the main download page.. everything has gone swell since starting with the right version ya'll worked so hard on.. Ya'll rock.. keep up the awesome work..

Hello, I have an orangepi win plus and I installed "Armbian_5.90_orangepi_ubuntu_bionic_next_4.19.57_desktop". I'm using ttyS2 and ttyS3 ports and working well for serial ports. But bluetooth not working. Bluetooth icon is shown at right top on screen. When I clicked bluetooth on and click search new devices, system say to me "adapters not found." I tried, And too many options I can't remembered but I can't. How to devices bluetooth on? If you have more information, I will send you any information from terminal. Sorry for bad English. Thanks for help.

sudo rmmod mv64xxx_i2c rmmod: ERROR: Module mv64xxx_i2c is not currently loaded root@WiPLUX-M040230BBQIGU:~# dmesg | grep -i i2c [ 0.846937] i2c_dev: i2c /dev entries driver [ 1.479459] sun8i-dw-hdmi 6000000.hdmi: registered DesignWare HDMI I2C bus driver [ 1.484185] /soc/i2c@7081400/pmic@36: Fixed dependency cycle(s) with /soc/pinctrl@300b000 [ 1.501006] mv64xxx_i2c 5002c00.i2c: Error applying setting, reverse things back [ 1.501095] axp20x-i2c 1-0036: AXP20x variant AXP313a found [ 1.502779] axp20x-i2c 1-0036: AXP20X driver loaded [ 53.381005] i2c i2c-2: mv64xxx: I2C bus locked, block: 1, time_left: 0 [ 55.429017] i2c i2c-2: mv6…

I just downloaded Olimex Lime a64 Armbian Bionic image. when I try to boot it with my sd card, kernel panics. I am posting full log below. It didn't happen with testing release. Testing release worked perfectly for the same board. U-Boot SPL 2018.11-rc3-armbian (Feb 08 2019 - 10:25:08 +0100) DRAM: 1024 MiB Trying to boot from MMC1 NOTICE: BL3-1: Running on A64/H64 (1689) in SRAM A2 (@0x44000) NOTICE: Configuring SPC Controller NOTICE: BL3-1: v1.0(debug):c9f55c0 NOTICE: BL3-1: Built : 10:25:02, Feb 8 2019 NOTICE: DT: sun50i-a64-olinuxino INFO: Configuring AXP PMIC INFO: PMIC: DRAM voltage: 1.36V INFO: PMIC: setup successful NOTICE: SCPI: dum…

Hello! I use cubieaboard2, setup "trusty_3.4.110_desktop", on first boot the cubieboard2 itself off. Power Off after the kernel load labels. Debian_jessie_4.4.1 work fine. Why may power off spontaneously?

Hello, I am developing a project that will use the ethernet module ENC28J60 on orangepi pc plus, but I do not know how to configure armbian to enable using the module. Searching the internet I just found solutions for raspberry. I have already enabled the spi-spidev option using the armbian-config tool. What should I do now? Thanks.

For some reason still unknow to me, my OrangePi Lite Wifi became unreachable twice. I should have checked whether it was something more. Anyhow, temperature is an issue that everyone says about, but I do not believe it is. To determine when Orange Pi Lite Wifi becomes unreachable I wrote a Python script (nothing special, similar to many on the Internet) that posts the ARM7 temperature of Orange Pi Lite to ThingSpeak platform (owned by Matlab). If, and when my Orange Pi Lite Wifi, becomes unreachable I will know as it will stop sending posts to ThingSpeak. Besides the main interest, I do something useful as I monitor the temperature of ARM7. (the image though it shows…

i have a tablet on Allwinner A20, I burned Armbian_23.5.0-trunk.134_Lime2_bookworm_edge_6.2.12_xfce_desktop.img.xz into sdcard, it looks like everything is okay, but the tablet work only via HDMI, how to enable the tablet display ?

Hi all, Somebody has any problem with NanoPI NEO using g_hid as keyboard ? I'm using the code below to send the keyboard report to /dev/hidg0, but the it throws an error. https://www.kernel.org/doc/Documentation/usb/gadget_hid.txt NanoPi NEO - Linux 3.4.113-sun8i jessie [ 373.427509] g_hid gadget: adding config #1 'HID Gadget'/bf064548 [ 373.427678] g_hid gadget: adding 'hid'/c527075c to config 'HID Gadget'/bf064548 [ 373.427782] gadget_is_softwinner_otg is not -int [ 373.427837] gadget_is_softwinner_otg is not -int [ 373.427881] gadget_is_softwinner_otg is not -int [ 373.427932] gadget_is_softwinner_otg is not -int [ 373.429424] g_hid gadget: cfg 1/bf064548 s…

Linux orangepilite2 5.4.43-sunxi64 #20.05.2 SMP Tue Jun 2 17:20:17 CEST 2020 aarch64 GNU/Linux I have managed by accident to get full USB3 speed on orange pi lite 2. I have bought a USB3 hub: "Bus 004 Device 002: ID 05e3:0612 Genesys Logic, Inc. Hub" , I have no idea which chip it has, it is in an aluminum case and looks like the one on the attached picture but black. By attaching atleast two usb devices in the hub USB3 somehow gets into full speed mode, one of them has to be USB2 device. I have managed to get with all devices I have ATM about 2000Gbs including iperf in both directions with rtl8153, hdparm -t on two usb2 memory sticks …

I have a NanoPi Neo and I'm currently looking to find out if the I2S pins can be set up as basic GPIOs? I can't find their names, (i.e. PA17) so not sure where to even begin with regards to tinkering the kernel. Any help appreciated! http://wiki.friendlyarm.com/wiki/images/c/c4/NEO_pinout-02.jpg

Hi. I'm using Cubietruck, and installed Ubuntu server(mainline) on it. Suddenly, I can't write to disk(SD card). Actually, yes I can. I could create, edit, or even delete files, but all the changes are gone after the Cubietruck is rebooted. The deleted files are back, and created files are gone. What should I check? My SD card is Samsung Evo 16GB, and I'm running Cubietruck for more than 2 years. I have never encountered this weird situation.

Hi, Is there any way to set all gpio to low in OPI Zero during de boot? becouse my OPI Zero is turning on some devices when is turning on. i've been searching about this problem but i couldn't find any solution. ty!

Hi folks Im facing with strange behavior of my cubie a20 Im booting it from sdcard since mainline armbian not support emmc (as far i know), but it boot from sdcard only when FEL button is pressed. Without FEL pressed it boot into android from emmc. In documentation i read if sdcard is present cubieboard tries boot from it which is legit. This behavior sucks when power loss occurs. My home-made router with some other stuff is offline and all other is offline. I expect to always boot from sdcard or emmc if i flash it with latest armbian. Please help if you can

I first noticed this on my Orange Pi Zero. The latest Armbian releases (4.13.x) have some kind of gap between bytes when transmitting over SPI. I have an SPI performance test built into my SPI_LCD code: https://github.com/bitbank2/SPI_LCD If you run the demo program, it measures how many frames per second it can write to an SPI-connected LCD. On older Armbian builds with kernel version 3.x, it would usually get 27-33FPS on the H2/H3 boards. With the mainline kernel builds and running the same code, I'm seeing 9-17FPS (depending on the board). The H5 doesn't seem to be affected (I'm using an Orange Pi Zero +2 H5 for testing also). Anyone else seeing…

Env is ARMBIAN 5.31 stable Ubuntu 16.04.2 LTS 3.4.113-sun8i When I run Kismet on this system (which creates a new interface in Monitor mode - wlan0mon), the original WiFi interface loses any connections, and will no longer function properly. Is this a expected behavior? Is there any way to get both monitor and normal mode to co-exist? I've looked around and don't see any obvious driver updates that would address this. Any suggestions (beyond adding a second WiFi adapter)?

First of all: my compliments to the staff of armbian for the important work done. I bought some lamobo r1 boards to use in a production environment such as (open)vpn router to realize a tele-service with PLC. I installed bananian (the first distro that I found on internet) but after a week I switched to armbian trying to create my own image from scratch. Very well, I like to have control over things. The question is: I should connect a lipo battery to the board so that when the main power goes off a daemon script syncs sd and then shutdown, but when the main power is reconnected the board must do a reboot automatically. It is possible to do this? Where should my daemon sc…

Hello, After i made the Focal update i2c is very slow and armbian-config does not start. So I made a fresh installation with Armbian Focal mainline based kernel 5.10.y But no I have the same problem. What could be the reason? Is it possible too test the i2c bus? thx greetings

Hello everyone, I know this is a well known problem of the OPi Zero, but in regarding to "solutions": h3consumption works only with the legacy kernel because of the use of Fex Is there a way to tweak the things h3consumption did in the mainline version? In the mainline version from armbian-config it is possible to disable USB, in /etc/default/cpufrequtils it is also possible to set the maximum frequency and wifi can be disabled. Does anyone know any option for disabling the GPU, limit the DRAM clockspeed and the maximum active cores? Is the only possibility to recompile the kernel, at the moment? Unfortunately the main tu…

Dears, I have done the last update. I lost dkms, and when trying to recompile/reinstall it, I started get strange errors. It seems binaries in linux-headers are compiled for Intel. I would even the kernel is configure for Intel. Was not able to compile the module actually. Was there some mishap? Rui

Hello all, I cannot get stereo output from the headphone jack on this device. Until last august I had an image of debian jessie (kernel 3.x) and this was working fine (IIRC stereo was OK). I used mycroft AI to read the microphone and play sounds, also used MPD music server, blablabla etc a great configuration. Something happened during one upgrade operation and I lost my boot so I thought "why not take this opportunity to flash a new image". Mistake. BIG mistake. Now I cannot get any application to output stereo audio and also I cannot get any application to use the microphone. Can someone please help out at least gett…

Hey, for the LEDs the option "disk-activity" which was possible in Wheezy Legacy is no longer available. Is it possible to re-add that? Thank you, Ingo Fischer

Hello, guys! I'm trying to make use of gpio-poweroff procedure. I'm trying to understand the consequences of the approach I've used. Here's what I did 1) Added power_ctrl: power_ctrl { compatible = "gpio-poweroff"; gpios = <&pio 6 11 GPIO_ACTIVE_HIGH>; force; }; to arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo-plus2.dts 2) Recompiled the device tree blob and put it where it belongs The gpio-poweroff's code got probed but failed due to `pm_poweroff_handler` being set to something. So I figured it out that it's set to `psci_sys_poweroff` in [drivers/firmware/psci.c](https://github…

Hi all, Recently i bought a orange pi +2E . I want to display it on a 2K display. with specs 2560x1440 resolution. https://www.alibaba.com/product-detail/New-5-5-LS055R1SX04-2K-1440_60694188895.html?spm=a2700.7724838.2017115.428.5a541062gAX23i I bought this board as it supports resolution upto 4K. But i failed to interface it with 2K. I m using armbian OS. I tried most of the modes in h3disp. Can anyone help me please . Thanks in advance

I have a raspi hat (rak2245) that has 2 versions: a pi-hat version that has a 40 pin-header on it for raspberry pi's , but also a smaller stamp edition. It uses spi and uart to communicate with the pi. I have it running without issues on my orange pi zero, even though the pinheader is a little too large. And via a breadboard I can access all pins just fine. But since I am making my own PCB anyway, I am interested in using the stamp version. The only difference between the stamp and the pi-hat version (aside from the form-factor and pin-out) is that the pi-hat version has an additional eeprom chip to tell the rapsberry pi about the function of the pins apparently. Now…

Hello, does this USB WiFi card work with armbian on Orange Pi 3 LTS? TP-Link Nano AC600 USB Wifi Adapter https://www.amazon.com/dp/B07PB1X4CN/ Does it need any drivers to be installed? If yes, is there any that is working with OPi 3 LTS? Btw I want to use this wifi adapter, because Armbian doesn't work with internal wifi card in this SBC - https://forum.armbian.com/topic/23505-orange-pi-3-lts-no-wifi/ (and sadly Devs didn't release a fix for it)

Please, help me how to config Lamobo-R1 with Lan USB QF9700. I need eth0, eth1 with command ifconfig. a) Plug USB QF9700 and reboot : ifconfig show only eth0 with mac address as Lan USB QF9700 Remove USB QF9700 and reboot : ifconfig show only eth0 with mac address as WAN I need two interface eth0 and eth1 for ( WAN and USB QF9700 ) work in command ifconfig. Best regards, CVH

Hello, In a GOLANG based, RPi 3B+ project I am using the https://github.com/stianeikeland/go-rpio package to read the state of the GPIO-s. I am planning to set up some Banana Pi M2 Berries with the same software. The package - as it was expected - doesn't work with the M2 Berry. I could adapt the package for the Berry, but I don't know which peripheral chip is used in it. Does anyone know which peripheral chip is used in the Berry? (The schematic diagram on BPI's page is useless). Thanks, G.

I think I know the answer to this but I'll ask anyways. Is there any command line software out there (e.g., VLC) that I could put onto an Armbian Server Edition version that would show a movie out on the HDMI port? I have a NanoPi M1 that has a HDMI port. But I'm assuming that without all the Desktop video driver, it isn't possible to do this on a headless server.

On the download page images have kernel 4.18-rc7 I need headers for this kernel. How to find which commit is these images are built from?

Hello, The NanoPi Neo 2 has an H5 SoC. When I look at the Linux mainlining effort chart at Sunxi, I see that Ethernet support for the H5 only came in the 4.15 kernel. But the kernel in the Armbian downloads for the NanoPi Neo 2 only have the 4.14.y kernel. So can one expect the GbE to work, on a NanoPi Neo 2, with the current Armbian (Bionic or Stretch)? Maybe you already backport the 4.15 Ethernet-related code (for the H5) into that 4.14.y kernel?

Hi, I´ve just search in all forum for the A20-Banana Pro. And I must realize, that it doesn't give a Armbian5.0-Trusty-without-desktop ISO or RAW. Therefore I once wanted to ask if this for "Legacy" and / or "Vanilla" possibly still comes? Because I seek the server version of "Ubuntu Trusty" for my Banana Pi Pro. Best regards, Inu

Finally Orange PI Family gets the 4.x kernel support.But there is no Vanilla Kernel on Orange PI PC.Please add the support on Orange PI PC.Thx!

Hey guys, I have a Banana Pro and recently switched to Armbian from Bananian. I boot from an HDD connected to the SATA port on bpi. Apparently the root fs is supposed to get resized to the max size(1TB in my case) during the first boot. But, well, it didn't work for me.. so instaed of 1TB I had 1.5 GBs. I wiped the partition in fdisk and created a new one using the old starting block(2048) but leaving the end to default. Result: I now have all the space available to me but everytime I log in it still says "90% of 1.5G". Why doesn't it scale?I know this is kinda ridiculous but I'm a perfectionist haha. ____ ____ _ ____ …

Hi everybody, burned the latest armbian for opi prime since I got the board, and the greed led is working, but after all I cannot find it with “arp -a” and the ethernet led is flash, both color. Anyone have the idea? I don't have a screen or tv even a router here course I am at university. So I directly connected my computer with the board. Don't think anything is wrong.

Hi all! I have Orange Pi One with Armbian Debian 5.8.9-sunxi on board. The problem is that when I catch 2 kHz square wave with OPi gpio, I have very big delta between signals. If I use "interrupt both endges" parameter for gpio, time between signals must be 250 microsecs. But now it floats between 200 - 290 microsecs. And I have achive this result after some suggestions from other forum topics: using isolcpu=3, run c program on this cpu, use max priority, disable powersaving for CPU. I try to read with wiringOP lib, and directly from sysfs, but still have jittering about 90 us. Also I think, that I have not very bad results for cyclict…

Hello, I've just found a topic about removing Allwinner legacy. I work with Orange Pi PC Plus board, H3 CPU. Do I understand correctly that the option to build system based on old v.3.4 kernel will be removed? Once I experienced a problem with system shutdown using newer kernel - got System halted message. This is why I decided to continue with legacy kernel. Please advise.

I am new to Armbian and I have been using Jessie on BPI M2 for a couple weeks now but I can't seem to get it to automatically boot into desktop mode when no monitor is connected. It always seems to go right into command line. I have a number of pieces of software that have a GUI and need to run under desktop mode right off the bat that I would like to have at startup. I have been doing a lot of searching and have been wondering if it is a frambuffer issue. Any suggestions would be appreciated.

I connected the dongle wifi but it does not seem to work. I get the error: rtlwifi firmware rtlwifi/rtl8192cufw.bin not available I have try to build, make scipts, git rtl8192cu-fixes, etc, but return error scipts/Makefile.build:432 recipe for target '/home/vbextreme/rtl8192cu-fixes/8192cu.o' failed my version armbian 5.24 kernel 3.4.113 you can pass me the prebuild module?

Hey, I have one system completely new installed with Armbian Xenial and one system installed with Armbian Trusty (some time ago) and then done Dist-Upgrade. Now after upgrading both from 5.20 to 5.23 I checked the relevant packages and there are differences: Original Xenial system: root@cubietruck3:~# dpkg -l | egrep "armbian| linux-" ii armbian-firmware 5.22 armhf Linux firmware ii armbian-hostapd-xenial 5.14 armhf Patched hostapd for xenial ii armbian-tools-xenial 5.22 armhf Armbian too…

Hi, please find attached a file where I describe how to install a home server on a Cubietruck, and the problems I encountered. Once the problems are solved, this could be a basis for an installation instruction. Any help much appreciated! Sincerely Engelbert Installation.pdf

Is it normal? Why Couldn't get bank PG regulator U-Boot SPL 2019.10-armbian (Feb 17 2020 - 08:31:10 +0100) DRAM: 1024 MiB Trying to boot from MMC1 NOTICE: BL31: v2.2(debug):572fcdd-dirty NOTICE: BL31: Built : 08:31:00, Feb 17 2020 NOTICE: BL31: Detected Allwinner H6 SoC (1728) NOTICE: BL31: Found U-Boot DTB at 0xc07ef00, model: OrangePi Lite 2 INFO: ARM GICv2 driver initialized INFO: PMIC: Probing AXP805 on I2C INFO: PMIC: aldo1 voltage: 3.300V INFO: PMIC: aldo3 voltage: 3.300V INFO: PMIC: bldo1 voltage: 1.800V INFO: PMIC: bldo2 voltage: 1.800V INFO: PMIC: bldo3 voltage: 1.800V INFO: PMIC: cldo1 voltage: 3.300V INFO: PMIC: dcdcd voltage…

Hello, I just use the Zero Plus 2 H3 with extension, using Armbian 5.83 but failed to get the combo to play the sound I use the command aplay -l but return no sound card found How to install driver for sound in this board?

Hello dear mates, first I want to thank zador.blood.stained for helping out with recompiling the DTB for A20 so we can enable PWM on Armbian. Link to his post :https://forum.armbian.com/index.php/topic/1817-using-pwm-without-rebuilding-kernel/ Now I'm seeking your help with this problem, after I added this code to the A20.dts file (I'm on a PCduino3 nano) &pwm { pinctrl-names = "default"; pinctrl-0 = <&pwm0_pins_a>, <&pwm1_pins_a>; status = "okay"; }; I'm able to compile the .dtb file, and after booting I can see the pwmchip0 on /sys/class/pwm. I can change the values for Polarity, Period, Duty_Cycle, Enable. The problem is, when I…

I'm not sure if this is a bug that needs to be reported and I don't know what issues it may be causing, if any. ----< CUT >---- Sep 16 08:55:56 loki kernel: [35972.411737] ieee80211 phy2: brcmf_fweh_event_worker: event handler failed (72) Sep 16 08:55:56 loki kernel: [35972.465736] ieee80211 phy2: brcmf_fweh_call_event_handler: no interface object Sep 16 08:55:56 loki kernel: [35972.465781] ieee80211 phy2: brcmf_fweh_event_worker: event handler failed (72) Sep 16 08:55:56 loki kernel: [35972.471791] ieee80211 phy2: brcmf_fweh_call_event_handler: no interface object Sep 16 08:55:56 loki kernel: [35972.471838] ieee80211 phy2: brcmf_fweh_event_worker: eve…

Hello, I try to re-install my olimex lime 1, but I'm unable to boot from the current buster image. For now, here's what I do to flash the sd card: % wget -c "https://dl.armbian.com/lime/Buster_current" % mv Buster_current Armbian_20.02.1_Lime_buster_current_5.4.20.7z % 7z x Armbian_20.02.1_Lime_buster_current_5.4.20.7z % sudo sh -c "dd if=Armbian_20.02.1_Lime_buster_current_5.4.20.img of=/dev/sdc bs=1M" And I come up with a result like this: % sudo sfdisk -d /dev/sdc label: dos label-id: 0xd9b237ef device: /dev/sdc unit: sectors /dev/sdc1 : start= 8192, size= 2318336, type=83 Is this empty space before the first par…

I have an OrangePI h3, I upload the Armbian in the SD card, but independent if the SD card is in or not, the Orange pi always display the both network leds turned on. Therefore I do not know if my problem is related to the SO or any hardware problem.

Hello, I installed Armbian on Nanopi M1 Plus. I used it for a couple of days but now I encountered a problem: the boot stops after the following writing appears: "started hostname service" I tried to wait several minutes but nothing happens anymore Best regards Marco UPDATE: The problem occurs when the device is powered only by the Debug UART, probably the pc usb is not enough to power it

I had a rather crazy idea (in my opinion) of trying to hook up a bluray drive to an Orange Pi Zero Plus that i have a spare of, then possibly set that up as an iscsi target with LiO to create a network attached BD drive. However, I'm already stuck even getting the BD drive to work with the OPi in the first place. I have the optical drive hooked to an externally powered USB 2.0 to ATA bridge (has a SATA port on it as well, this hardware config was tested in windows and worked great) and that's plugged into the single USB port on the board. The problem i seem to be having (not entirely sure I'm correct, very new at this) is that sr_mod is not enabled or present. T…

Ive just gotten a orange pi zero, fairly inexperienced with linux too. Ive been trying to get a distributed.net client running on it. Does anyone know if this is even possible? I tried a few differnt versions (ARMEL, ARM/eabi and ARM/ELF) always get a no such file or directory when trying to run them using ./dnetc Cheers

Hi, i have a small/big problem because i`m not able to change the system time. The same with ntpdate, its not able to adjust :( and i didnt have any idea whats wrong. My cubie3 runs with Debian Jessi. Here are some logs what i tried to adjust my time. Can anybody see whats wrong and what can i do? You see, a "date -s" has no result in adjusting system time root@www:~# date -s "15 MAY 2018 09:47:00" Di 15. Mai 09:47:00 CEST 2018 root@www:~# date;hwclock Di 15. Mai 10:22:58 CEST 2018 Di 15 Mai 2018 10:02:04 CEST -1.711357 seconds same, to success with timedatectl root@www:~# timedatectl Warning: Ignoring the TZ variable. Readi…

Hello guys! I haven't found any helpful regarding to my problem, maybe you are more professional as me! (I'm not really!) I would like to set an ordered DHT22 temp & humidity sensor to work on this SBC. OS is : NAME="Ubuntu" VERSION="18.04.3 LTS (Bionic Beaver)" Kernel : Linux cubieboard2 5.3.9-sunxi #19.11.3 SMP Mon Nov 18 18:49:43 CET 2019 armv7l armv7l armv7l GNU/Linux I can export a pin as GPIO, and control a simple led. I've built a kernel module for DHT22 found on github : https://github.com/edwardlintw/DHT22 The main problem is, after successful GPIO export : echo 202 > /sys/class/gpio/export cat /…

Hello, here is a list of the interrupts of my BPi: root@bananapi:~# cat /proc/interrupts CPU0 CPU1 17: 0 0 GIC 29 Edge arch_timer 18: 1240001 514159 GIC 30 Edge arch_timer 21: 0 0 GIC 54 Level sun4i_timer0 22: 0 0 GIC 113 Level sun5i_timer0 26: 0 0 GIC 42 Level sun4i-spi 27: 14635330 0 GIC 64 Level sunxi-mmc 28: 0 0 GIC 71 Level ehci_hcd:usb1 29: 0 0 GIC 96 Level ohci_hcd:usb3 30: 755 0 GIC 88 Level 1c1…

Hi, As displayed at boot (when terminal connection used through SSH) where can I find the CPU temparature after the boot ? Because I tried to check the content of files : cat /sys/devices/virtual/thermal/thermal_zone0/temp and cat /sys/devices/virtual/thermal/thermal_zone1/temp It well displayed it but when I use the "sensors" command line (comming from "lm-sensors" package installation) and even after having done the recommended "sensors-detect" command line (and answered YES at all the questions to be sure having found all the potentially existing sensors), the "sensors" command line just returned this Sincerely t…

Hi, I've been getting a journal file full of this kind of entry lately, which is using up all my memory until I get an error "no space left on device". I have two Cubietrucks, this is only occurring on one of them, both running mainline kernel and both up to date. The one causing problems has a 2.5" hdd mounted via the sata connector. Oct 16 11:27:35 stpeter.nentura liblogging-stdlog[1048]: action 'action 12' resumed (module 'builtin:omfile') [v8.24.0 try http://www.rsyslog.com/e/2359 ] Oct 16 11:27:35 stpeter.nentura liblogging-stdlog[1048]: action 'action 2' suspended, next retry is Tue Oct 16 11:28:05 2018 [v8.24.0 try http://www.rsyslog.com/e/2007 ] …

Hi i wonder why ISR result is strange first i test in orangepi zero Plus H5 that result is repeated infinite recall function summary - recall infinite function if i input interrupt pin(button) i test result repeat second i test in orangepi zero(H2) that result is only called function once #include <wiringPi.h> #include <stdlib.h> #include <stdio.h> #include <unistd.h> void signal_both(void){ printf("Signal Both\n"); }void signal_falling(void){ printf("Signal Falling\n"); }void signal_rising(void){ printf("Signal Rising\n"); }int main(int argc, char **argv){…

Hello, im new to linux and armbian systems, but im really interested in the topic, recently im working with an a20-Olinuxino-Lime2 , and my goal was to put another OS, for that i followed some tutorials to install a Linux Mate system on the sd card, i configured it to access the internet thought my router but after a point that i changed the kernel , i lost connection to the internet, all my "interfaces" files are the same and i can ping to my router, but i cant ping from my computer to it booting up it gives some errors opening lib modules: systemd-udev(439) could not open builtin file : "/lib/modules/3.4.109-sunxi/modules.builtin.bin" modprob : ERROR: ../lib…

I would like to grab a desktop img of armbian for my orange pi, I did download 1 that said desktop and have logged in and with password and created a account but as far as I can go is to the lunix prompt how do I get desktop install of can any only please point me to download the desktop img for my orange pi plus 1 2e. Thank you Sneaky

Hi, for the raspi it is possible to add a second SD Card... I was wondering whether armbian brings the necessary kernel modules (mainline) to achieve this functionality? My approach is not speed, I need tight space so a second SD without USB adaptor would be excellent...

Hi, I have a problem with the wifi connection of the Orange Pi Lite when I connect a HDMI device and switch it on. It is not possible to get the wifi working. I have the same auth. error message like many others here too. But the wifi works well without HDMI device or when the device is off. I have tested the last debian and ubuntu server version and mainline. Thanks for helping

Hi! Using Jessie, I made the mistake of running apt-get upgrade => and on the next reboot by R1 did not boot anymore. I can chroot into the image (using qemu-arm-static) but have absolutely no clue what went wrong: Checking my dpkg.log, I found that the kernel seems not have been updated? root@asterix:/var/log# grep 05-10.*linux dpkg.log 2016-05-10 18:22:02 upgrade linux-libc-dev:armhf 3.16.7-ckt20-1+deb8u3 3.16.7-ckt25-2 2016-05-10 18:22:02 status half-configured linux-libc-dev:armhf 3.16.7-ckt20-1+deb8u3 2016-05-10 18:22:02 status unpacked linux-libc-dev:armhf 3.16.7-ckt20-1+deb8u3 2016-05-10 18:22:02 status half-installed linux-libc-dev:armhf 3.16.7-…

Hello guys. After a long time unsuccesfully trying to use a NanoPi Neo to record I2S data, I wonder if is there some NanoPi board that is capable of such thing. Can you suggest one? Thank you very much!

Hello, guys, please help setup HDMI output to 480x320 in mainline kernel for BananaPi M2. I am using 3.5inch HDMI display, it is working fine but my current resolution is too high. All attempts to change disp_mode in armbianEnv.txt didn't help. Thanks

Hi I' am trying to use the SPI device on the Olimex Lime 2 board but i am having a lot of trouble. Basicaly i do not see the spidev on the device three. i am using the last image (Armbian_5.91_Lime2_Debian_buster_next_4.19.59), i have activated the overlays and that is the my armbianEnv.txt file verbosity=1 logo=disabled console=both disp_mode=1920x1080p60 overlay_prefix=sun7i-a20 rootdev=UUID=3563b9df-bd15-4366-b897-da0963dfd5a0 rootfstype=ext4 overlays=spi-spidev usbstoragequirks=0x2537:0x1066:u,0x2537:0x1068:u Where am i wrong? Thanks in advance for any kind of help

I recently started playing around with OrangePi Zero with the Allwinner H2+ CPU. I want to test out the internal audio DAC. To do so I enabled "analog-coded" in armbian-config. After rebooting I saw a new audio device in the output of "pacmd list-cards", but it says that only mono is available. How can I configure stereo sound? I haven't played around with "/etc/asound.conf" much as I don't understand it. Also, I don't have anything plugged into the audio pins on the GPIO.

I have a question, does anyone know a method to start in the Opi Lite system the I2S audio interface and in particular I mean the module: PCM5102 / PCM5102a On my old OrangePi Lite board, sound and audio in the configuration as mentioned above really work great ... but unfortunately the Armbian system that I use is no longer supported. This is the Ubuntu version (xenial) and kernel: 3.4.113-sun8i, I managed to update some programs important to me, e.g. mpd / mpc but not to the latest versions. I also have another version of OrangePI 3 LTS and I know that on this model it is rather impossible to start I2S + PCM5102 so I used a good sound card under USB and it is OK. Ho…

Hello i cant get orange pi zero 2 hotspot working with supported image bullseye. Did anyone got it working? Thank you

Hello. I'm writing a program that requires sound.target. I was reading about sound.target and how it's a special systemd unit that doesn't load until the system finds the sound card. Armbian takes quite a bit of time to find the sound card on the OPi, around 30 seconds. Or, maybe it's something else that's making it take so long. I was wondering if there was a way I could mess around with systemd or something else to make the sound card found faster, thus sound.target and my program loading faster upon powering on the device. Thank you

Hi Everyone After several weeks (maybe months) seeking for a solution for my problem I decide to post it here and hope to get a fix for it. At first I still run an Cubietruck with Armbian (everytime the latest Version) with just a few services (Pi-Hole, RPi-Monitor) and for future use Apache, MariaDB and PHPmyadmin (just installed and running, but with no content). Now to the problem itself: The Cubietruck runs approximatly 6 to 10 days and then it's get stuck. Only a reset solve the problem for the next 6 to 10 days. On every crash I checked the syslog and it always show the following lines as latest entries: Jun 29 15:17:28 localhost systemd[1]: St…

Hardware: Orange Pi Zero 512MB LTS (several different devices), bench power supply, good SD card - everything working good at all clock speeds from 480MHz upwards (all the way up to 1.4GHz even, with a heatsink). ffmpeg encode, stress-ng etc. are all fine. Specifically, the board is rock solid at 960MHz. What I want to achieve: take the U-boot for OPi Zero, and rebuild with an adjusted config to achieve a faster boot time, by replacing CONFIG_SYS_CLK_FREQ=480000000 with CONFIG_SYS_CLK_FREQ=960000000. (Does anyone know why the standard Armbian build is set to boot at such a low clock speed?) Starting point: I can successfully build U-boot from the A…

Hello, First I want to thank you for wonderful linux distribution it was been awhile since I last used it, and lot of things changed for me. So I need someone to point me in right direction to catch up with some changes. i'm using Armbian_5.38_Orangepizero_Debian_stretch_next_4.14.14 First thing I do not see is script.bin - I use to configure gpios, which one gonna be uart, spi ........ etc. How can I do that now. Second thing is h3consumption tool, I usually use it do disable some system components, like usb in order to lower cpu temperature. I found answers to other things so far using google. So if someone point…

Hi Harness the Board Orange Pi + 2. I propose to add the configuration for it. sasha@ubuntu:~/orange/sdk/lib$ git diff master..add-orangepiplus2 diff --git a/config/boards/orangepiplus2.conf b/config/boards/orangepiplus2.conf new file mode 100644 index 0000000..5d37e8c --- /dev/null +++ b/config/boards/orangepiplus2.conf @@ -0,0 +1,11 @@ +# H3 quad core 2GB RAM WiFi eMMC +BOARD_NAME="Orange Pi+ 2" +LINUXFAMILY=sun8i +BOOTCONFIG=orangepi_plus_defconfig +MODULES="8189es #gpio_sunxi #w1-sunxi #w1-gpio #w1-therm #gc2035 #vfe_v4l2 #sunxi-cir" +MODULES_NEXT="8189es" +CPUMIN=480000 +CPUMAX=1296000 +CLI_TARGET="jessie:default" +DESKTOP_TARGET="jessie:default" +KERNEL_TARGE…