Allwinner sunxi

Armbian 5.90 stable Ubuntu bionic Orange Pi PC The Login Screen is very broken and after login, the Screen wents black and only the mouse Pointer is to see.

Hi, I have connected Orange Pi Lite over serial UART, but looks like the default settings are to not output the boot log to serial. You can only see U-Boot messages, then "Uncompressing Linux kernel" and after some time the login prompt comes. What exactly do I need to change/configure to get the classic kernel boot log to serial console? Thanks

I'm testing the OrangePi+ and OrangePi+2 for review. I noticed my OPi+ was running a lot cooler than my OPi+2. Reason is difference in kernel. Just tried 5.8.5 on the OPi+ and it also ran as hot as the OPi+2. OPi+ with kernel 4.19.62 vs OPi+/OPi+2 with kernel 5.8.5 No fan idle OPi+ 50C No fan maxed OPi+ Throttle at 75C to 1.3Ghz at 80C to 1.2Ghz doesn't go higher than 80C Fan idle OPi+ 27C Fan maxed OPi+ 54C No fan idle OPi+2 58C No fan maxed OPi+2 Throttle at 80C to 1.3Ghz at 85C lower. Barely reaches 85C / Debian throttle at 75C to 1.3Ghz Fan idle OPi+2 33C Fan maxed OPi+2 60C 2 heatsinks+fan 64C w…

I am trying to install Tensorflow on my Orange Pi One. Everything seems okay on install, but pip says ERROR: Could not find a version that satisfies the requirement tensorflow ERROR: No matching distribution found for tensorflow My guess is that the OS is a 32bit version and that Tensorflow runs on 64bit ones only. However, I can't find any source of checking whether the Armbian version I have is 32bit or 64bit.

hi new armbian user here.. ive recently got a pcduino v3b and the old OSs for it suck, cant update anything or find what i need... ive tryed downloading a few builds of armbian for pcduino, but im having some issues, firstly hdmi doesnt boot, i mean, never get anything on screen, the only access i have is via the serial port ive just grabbed the latest build that says the board is supported, but i cannot get a network connection, ethernet is plugged an 'up" but no ip or connection, and it seems the onboard wifi cant be found either.... also receiving error messages about failing to reset the ethernet dma ... Starting kernel ... [ 28.028075] sun7…

Hello all, I'm trying to revive my old OPIZ + cheap expansion board. I've tried all recent images available but I couldn't get it to work. Is there any old version (with repository still alive) available with which I can install sox + alsa. I don't need recent kernel or software (but wifi) Any idea? Thanks for help Pascal

Hi everyone! I have v25.8 rolling for radxa cubie a5e running Armbian Linux 6.14.0-rc1-dev-sun55iw3 runnig and it has only ttyS0 serial device. Due to device schematics it should be able to provide serail interfaces with RTS/CTS support UART4-7. Was anyone able to activate this devices? As I understand, I need an overlay .dtbo files. But those cannot be found anywhere in /boot. Also I can compile those overlays, but I need the correct .dts files.

Igor please help me Tried again to run with 4.1.6. Cubietruck is needed online. He thought for a moment, then got all che need for dhcp and gave the console. Only one problem... can't lift the access point, ifconfig sees wlan0, iwlist sees wlan0, but hostapd does not work there is no BCMDHD module, (not running modprobe bcmdhd) what to do? Igor please help. root@gate:~# modprobe bcmdhd modprobe: FATAL: Module bcmdhd not found. How to translate the adapter in Ap mode? where to get the module? there are modules b43, brcm80211, rt2x00, rtlwifi but they are not suitable. in the distribution which was used before - it worked thanks in advance!!!

Hello, with 3.4. kernel I could use my csi-cam on my R1: #5.0 Mega Pixel Banana PI Camera Module for Android #and Linux. OV5640 chipset, CSI connector #Price: US $24.00 / piece from aliexpress sudo modprobe ov5640 sudo modprobe sun4i_csi0 #video stream #mplayer tv:// #snapshot mplayer tv:// -vo png -frames 1 Now I switched to armbian 4.7 with 4.2.6 to use new wifi-usb-drivers but I saw that those modules are not supported in the new kernel. :-( Source of drivers: https://github.com/LeMaker/linux-sunxi/tree/lemaker-3.4/drivers/media/video/sun4i_csi https://github.com/LeMaker/linux-sunxi/blob/lemaker-3.4/drivers/media/video/sun4i_csi/device/ov5640.c Did a…

hi all, Use an old version of cubietruck. I Can use the new script /usr/lib/nand-sata-install for install my old version? Kernel 3.4.104-sunxi regards

Hi, I am developing application that will show graphics in console mode using frame buffer access in system with Orange Pi PC board. Several Debian images I tried until now from Orange Pi downloads always set up 32bpp frame buffer. Calling 'fbset -depth 16' causes screen corruption. Changing script.bin setting (fb0_format = 5) did no change. Any suggestion?

Hi Guys, I installed armbian on an SD Card and the installed it to the eMMC. Which all worked fine. After a bit of tinkering, it would no longer boot (no ssh access) and when I insert the original sd card now it wont boot from that either. I think I read that the it won't boot from the sd card if there is a valid boot record on the eMMC, so what can I do now? Thanks

Ive just gotten a orange pi zero, fairly inexperienced with linux too. Ive been trying to get a distributed.net client running on it. Does anyone know if this is even possible? I tried a few differnt versions (ARMEL, ARM/eabi and ARM/ELF) always get a no such file or directory when trying to run them using ./dnetc Cheers

Hi, I have serious problems with the 5.25 images of armbian on a cubietruck. After a fresh install and apt-get update apt-get upgrade I get errors with : dpkg: error processing archive /var/cache/apt/archives/linux-libc-dev_4.4.0-78.99_armhf.deb (--unpack) This is for the Armbian_5.25_Cubietruck_Ubuntu_xenial_next_4.9.7 image, with other images this concerns a different package. Only Armbian_5.25_Cubietruck_Ubuntu_xenial_default_3.4.113 works. After this error, the filesystem seems to be defect and is remounted ro. On another try, I removed the rmount ro on error option from the fstab and the /var/lib/dpkg directory was corrupted. …

Hi, In the recent builds (5.32) noticed an annoying ..feature. When shutting down from desktop, it asks for password, whereas that was not been asked in prior versions. Build image is OPiPC legacy Ubuntu desktop. Can we revert it back to not asking for password when shutdown/reboot from desktop?

Hello, dear users and developers. Could you help me to enable SPI1 subsystem and use the corresponding device file /dev/spi... to test/probe SPI communications on my Orange Pi Win (Plus) machine? For the sake of that I am ready go migrate from currently good for me and quite fresh "raspbian for orange pi" where I've already implemented about 95% of required functionality. And it seems the only place where I can talk to people about SPI stuff in ready linux distributions is right here. I actually read here about some SPI issues on Orange Pi Zero but I have some troubles at getting possible packages to experiment at my current distribution and I am not skilled,at all, at …

LANG=en_CN.UTF-8 I have it+SD card+usb TouchScreen+HDMI Screen which work with http://www.orangepi.org/'s image. I've downloaded https://dl.armbian.com/orangepilite2/Debian_stretch_next.7z,verified the sha256 checksum,burn SD card,verified checksum of SD card... After UBoot, nothing was displayed,but `fdisk -l /dev/sdb` changed -------------------------------- Disk /dev/sdb: 30 GiB, 32220643328 bytes, 62930944 sectors Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disklabel type: dos Disk identifier: 0x16977123 Device Boot Start En…

I am a new owner of Nanopi K1 plus. Can someone tell me how to install a desktop version of my device?

Hi When I run `cat /proc/cpuinfo`, the Features line shows the following features Features : fp asimd evtstrm aes pmull sha1 sha2 crc32 cpuid But doesn't the H5 support neon and vfpv4? Anyone know why they aren't shown? Thanks $ cat /proc/cpuinfo processor : 0 Processor : AArch64 Processor rev 4 (aarch64) Hardware : sun50iw1p1 BogoMIPS : 48.00 Features : fp asimd evtstrm aes pmull sha1 sha2 crc32 cpuid CPU implementer : 0x41 CPU architecture: 8 CPU variant : 0x0 CPU part : 0xd03 CPU revision : 4

Hello, I’m from Russia, I don’t speak English well, I write a translator through Google, I hope you will understand me. My Orange Pi One Plus H6 installed different Armbian image 5.3.9 the system works well, but there is no sound via HDMI, in the pulseaudio tab of the configuration menu it says "there are no cards available for configuration". Did I understand correctly that the H6 processor does not support the audio codec, so there is no sound, or am I doing something wrong? Thanks for the answer.

I'm trying to use a c270 webcam, but it is not listed on USB devices. Can someone help me?

During first boot and following first login as root got this error message: New to Armbian? Documentation: https://docs.armbian.com Support: https://forum.armbian.com New root password: ************ Repeat password: ************ Detected timezone: America/Mexico_City (CST, -0600) Generating locales: es_MX.UTF-8 Adding console keyboard layout: mx /usr/bin/ckbcomp: Can not find file "symbols/mx" in any known directory I am not sure that console keyborad layout "mx" exists.

Hello! I run Armbian (just updated to version 21) from an 128GByte heavy duty SD card. I am just trying to setup searx (https://github.com/searx/searx) which is using Docker containers. One of the Docker containers won't start, throwing an error message: I searched for long, trying to find some possible solution for this issue. The most fitting seemd to be, where someone said: Yes, it's for another OS and hardware, but I found no other possible solution. So disabling apparmor through a kernel parameter, is what I am trying to achieve. I addded 'apparmor=0' to the bootenv, using armbian-config. I al…

Hi! I'm using Orange Pi Mini with Armbian_4.2_Orangepi_Debian_jessie_4.1.6. AP mode seems not to work as manual. hostapd-rt and hostapd.conf-rt seems better but I cannot find the AP. Please advise me! Thanks in advance. ----------------------------------------------------------------------------------------- FYI, root@orangepi:~# lsmod Module Size Used by r8188eu 396949 0 evbug 1484 0 evdev 9340 0 sun4i_ts 3722 0 root@orangepi:~# hostapd /etc/hostapd.conf Configuration file: /etc/hostapd.conf nl80211: Driver does not support authentication/association or connec…

Hi! I've tried to compile the lwjgl lib on my opiplus2, but I'm stuck on ant compile_native_es. ant jars_es finished successfully. The error: [apply] /usr/bin/ld: cannot find -lEGL Tried to install libegl1-mesa-dev package but it conflicts with the mali driver package. Is it possible to compile the lwjgl with opengl-es on the opi, or that's a dead idea? Thanks in advance!

Well a little info, I've been using my orangepi one with an SDR dongle to track airplanes with flightradar24 for the last few months. My intentions were to use a POE adapter and run the board outside near the antenna at one point. I have now received the final parts and went to move it today. It has been running flawlessly for a month with my POE adapter off of a switch near my PC in my shop. I now plan on connecting it to the main switch on my LAN. So previously my setup was: Router -> switch -> long ethernet to shop -> swtich -> orangepione now I want to run it: Router -> switch -> long ethernet to outside -> orangepione But for some reason…

Hi, I installed the Xenial Mainline 4.6.7 image for the Orange PI PC+. That works fine and I can boot into the system. But when I do an apt-get update & upgrade, the system hangs afterwards during the boot. At the first boot after the upgrade the system hangs after "Started udev Coldplug all Devices.". The second boot a kernel panic occurs. See http://pastebin.com/47t45ujr Is this a known problem? Regards

Having invested many, many hours getting the video out to work on my recently purchased Orange Pi Zero kit, I'd like to leave this heads up for the next person having trouble with video out. In my case, none of the advice I could find in this forum or elsewhere seemed to make any difference. If you find yourself in a similar situation, here are some things you should know. The latest Armbian images for the OrangePi Zero enable composite video out by default. It should just work. (Well at least the Ubuntu image -- I never actually verified Debian Jesse worked after I fixed my expansion board.) You should NOT need to fiddle with /etc/modules or .fex files. Altho…

Hi I have use Armbian v5.31 Debian jessie kernel 4.11.5-sun8i with Orange Pi Zero. When I have use armbianmonitor or rpimonitor always information about CPU frequency is null. The directory sys/devices/system/cpu/cpu0/cpufreq/ are empty for this reason rpimonitor don't show related information to CPU CPU total: undefined% (Sys: undefined%, User: undefined%, I/O wait: undefined%, Nice: undefined%) CPU frequency: undefinedGHz DRAM frequency: Not available Regards

Hi all! Has anyone some experience with dts overlays for the mainline kernel 4.14.47? I connected the SHT11 temperature sensor to PA7 and PA8, installed the sht1x.dts overlay from https://github.com/armbian/sunxi-DT-overlays/blob/master/examples/sht1x.dts via "sudo armbian-add-overlay sht15.dts" and afterwards looked via dmesg into the kernel output. That's what my OPLite reports: It is a kernel IO error. The LogicAnalyzer doesn't record any pin toggle. But what am I doing wrong? Do I have to deactivate the pins in GPIO driver? Can someone please help me? As I soldered the SHT11 by myself I modified some RPi userspace code to v…

hello everybody, I am new on the linux world but after some search and work , I managed to start my Orange Pi plus 2E with a stretch image armbian 5.38 and everything is working well. Recently after successfully installed several domotic solution like Jeedom and Zwave, I start to work on the integration of a 3G card, but I need to use some CLI to change parameters and it is when I discovered that I completely forgot Root password and the other SU abled user account. Since everything is running from the eMMC, i cannot access to any fils in the OS as explain in some other discussion with card using SD card. Is there a way to recover…

I was searching for a UPS for the Banana classic and then saw you just can connect a battery to it. What i can't find information about if it needs to be unprotected or if i can use my protected Keeppower 18650 Li-Ionen's that i already have for my flashlight anyway. And is there anything special i need to do in Armbian? Just connect the battery and it works? Hard to find information :-(

Hello all, I cannot get stereo output from the headphone jack on this device. Until last august I had an image of debian jessie (kernel 3.x) and this was working fine (IIRC stereo was OK). I used mycroft AI to read the microphone and play sounds, also used MPD music server, blablabla etc a great configuration. Something happened during one upgrade operation and I lost my boot so I thought "why not take this opportunity to flash a new image". Mistake. BIG mistake. Now I cannot get any application to output stereo audio and also I cannot get any application to use the microphone. Can someone please help out at least gett…

I had an annoying issue with the WiFi of this board with Armbian 5.65 Ubuntu and Stretch. Sometimes it would spontaneous lose its WiFi connection. After researching it for a while I noticed that the wlan0 interface sometimes lost it's IP address. At first I thought it had something to do with the DHCP lease or sleep mode of the adapter. I just couldn't get my head around it and I ended up removing network-manager and going back to creating an interfaces.conf file for setting up my network interfaces. Somehow this solved the issue, the WiFi connection hasn't failed since! To do this, first create the wpa supplicant configuration file: ~# …

Hello, I think having found a WiFi issue when connecting an Orange Pi zero device to an Access Point device based on the Atheros AR9280 chip. 1 Armbian_5.75_Orangepizero_Ubuntu_bionic_next_4.19.20 1.1 After installed the last Ubuntu Armbian image nmtui tool doesn't detect the ssid in the list of wifi network 1.2 after sudo apt-get update & upgrade & reboot (-> Armbian v5.75 / Unbuntu 18.04.2LTS / v4.19.25-sunxi) nmtui tool detect the ssid in the list of wifi network I can well connect to this ssid WiFi channel. But the Wifi cnx is disabled if the following case : The ethernet cable is no…

ARMBIAN 5.75 stable Ubuntu 18.04.2 LTS 4.19.38-sunxi Orange Pi Zero Board Please refer armbianmonitor.log for armbianmonitor -U command output details I have configured My Orange Pi Zero onboard wlan chip (xradio_wlan driver) to work on both Ap mode and Client modes simultaneously. When both Ap and Client interfaces are up and working, and when the connected wifi channel of the Client interface changes, kernel hang occurs. Error message [20148.872296] rcu: INFO: rcu_sched self-detected stall on CPU [20148.877893] rcu: 1-....: (4945709 ticks this GP) idle=8aa/1/0x40000002 softirq=9640/9640 fqs=2447771 [20148.887182] rcu: (…

Dears, We have 4 boards Nanopi Neo2, but when we connect to energy, they don't boot, leds of net port (green and yellow ones) and internal led (red) are on all time. We tried to access via serial port (using an usb-serial adapter), but they not show any boot process. We tried some different boot images on sd card. Nothing works. All four devices are in this situation (and they are new!). There is any thing we can do?

Hi guys! I am making a separated network to connect my OPi3 to my old notebook to run some codes of my research. So, the problems is with ethernet connector in Orange Pi 3 that when I connect the cable from OPi3 to my switch LEDs just flash slow and in big intervals. When I try to ping from OPi3 to computer the ping just happens after big time later. I verify the cable and the switch with other devices (my personal notebook and my notebook from work). Everything is ok and running well. One thing blow my mind: when I connect cable from OPi3 directly to my notebook the LEDs of ethernet of OPi3 works normally but in the armbian the networks not alway…

Hello. I'v recently tried to update by old orange pi zero to latest armbian and it does not boot. Serial console is dead silent. I'v tried different armbian releases, sdcards, but result is the same. However card with old boots perfectly fine. Image orangepizerolts also works, but it has huge overheating problem. I'v tried to flash uboot to spi, but it does not boot either. Sadly old uboot did not worked with latest armbian. Any idea?

I've installed Armbian 23.11.1 Bookworm on a FriendlyElec ZeroPi. This version works flawlessly. A few days ago I updated to Armbian 24.2.1 and since then the ZeroPi crashes and hangs. Sometimes it happens after a few minutes, sometimes after a few hours. When it crashes I can't ssh to the device anymore (headless operation). Unbound, AdguardHome and cups aren't accessable, too. The last messages of the journal in an open cmdline window are: Mär 03 20:50:14 azp kernel: rcu: INFO: rcu_sched self-detected stall on CPU Mär 03 20:50:14 azp kernel: rcu: 2-....: (5249 ticks this GP) idle=16bc/1/0x40000002 softirq=20679/20679 fqs=2625 Mä…

I have a cubieboard2 running Armbian_4.5_Cubieboard2_Debian_jessie_4.2.3.zip and when I ran a seemingly innocent "npm search" command, the system became extremely slow. It responded to pings, but SSH commands were taking many minutes to complete. I was able to grab a screenshot of "top" while it was in this state (attached). Root is on SD, I set up a 1GB swap partition over SATA. My questions are: * Is setting up a 1GB swap partition over SATA a bad idea? * Why do all of the processes suddenly report 100% CPU when main memory runs out? * How can I prevent this in the future? * Is there any other diagnostics or tests that can help determine the root cause? Thanks…

Hi, I'm trying to install Armbian 5.20 vanilla kernel to eMMC on my Opi PC+. After nand-sata-install finishes I shutdown the Opi PC+ and power it back on. At least, I enable the power, I don't see anything happening in minicom on my pc. Only when powering it with a microsd in the slot (with armbian) will the uboot show in minicom on my pc. Doing a nand-sata-install with 5.14 legacy worked. What am I doing wrong (especially seeing nothing after a reboot with my ttl-to-usb connected is a bit strange for this noob)?

I connected the dongle wifi but it does not seem to work. I get the error: rtlwifi firmware rtlwifi/rtl8192cufw.bin not available I have try to build, make scipts, git rtl8192cu-fixes, etc, but return error scipts/Makefile.build:432 recipe for target '/home/vbextreme/rtl8192cu-fixes/8192cu.o' failed my version armbian 5.24 kernel 3.4.113 you can pass me the prebuild module?

hey guys, led folder is missing from /sys/class/ and even in /sys/class/gpio_sw/ led is included in fex file. can anyone tell how does linux load configuration from fex to orange pi ?

Hello, today I want to connect the OpiPcPlus to a Flexscan S1921 Monitor. I select h3disp -m 33 -d to use my *tested* hdmi-to-dvi cable and reboot. Now the monitor complains: fV: 59.9 Hz fH: 63.9 kHz fD: 161.7 MHz ****red*** this seems too high because VESA mode should use a pixel frequency of 108MHz which is also the spec of the monitor. 1280x1024 @ 60Hz (VESA) hsync: 64.0kHz 1280x1024 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync The pixel frequency seems too high for the 60 Hz image refresh, it corresponds to 85 Hz. I am using legacy kernel: Linux JagOpi 3.4.113-sun8i #10 SMP PREEMP…

Hi, I am running the latest Armbian stable headless build with legacy kernel for a few weeks now without issue (tvheadend, cups, sane, shairplay-sync, pi-hole). Yesterday I added a dvb-c stick from sundtek which works pretty well. However, I noticed that only 1 USB port works (the one by itself). I can either connect the dvb-c stick or my printer/scanner. Attaching another device to either of the other 2 USB ports does not work... What am I missing?

Hi, im trying to get Armbian for Orange Pi Zero (512). I only have ethernet with a router to SSH. No serial to USB. - If I try the stable Ubuntu version It powers on with solid Green LED. - ~1min later Red LED starts blinking (pulse-pulse-stop) in a cycle and nothing happens. There is no discovered device on local net. So i cannot SSH. - If I try debian stable release device is shown on net as orangepi.home. or something like that but if I try ti SSH -> timeout error. Ping doesn't work at all. I have tried other distros like Pulpstone and OpenWRT which work loke a charm but not Debian based. I tried redownload…

Hello I try to install Kodi on a Orange Pi Win plus, but it stops with errors http://kodi.wiki/view/HOW-TO:Install_Kodi_for_Linux this commands are working apt-get install software-properties-common add-apt-repository ppa:team-xbmc/ppa apt-get update at this poit i have Troubles apt-get install kodi i didnot find a soulution on google i know the builds are not ready, but is ther a soulution or what can i to. sry for my bad english

Hi all, With a fresh install of version 5.38 (jessie 4.14.15, idle since 5 min.), I've a CPU throttling and load issues : Spoiler root@OPZ2:~# armbianmonitor -m Stop monitoring using [ctrl]-[c] Time CPU load %cpu %sys %usr %nice %io %irq CPU C.St. 07:29:43: 1200MHz 1.11 23% 13% 8% 0% 1% 0% 44.5°C 0/8 07:29:48: 1200MHz 1.18 1% 0% 0% 0% 0% 0% 43.1°C 0/8 07:29:53: 1200MHz 1.15 0% 0% 0% 0% 0% 0% 43.0°C 0/8 07:29:58: 1200MHz 1.14 0% 0% 0% 0% 0% 0% 41.7°C 0/8 07:30:04: 1200MHz 1.13 0% 0% 0% 0% 0% 0% 41.6°C 0/8 07:30…

Hi guys! I can't add mali to the device tree. created dst file as in instruction: mali: gpu@1c40000 { compatible = "allwinner, sun7i-a20-mali", " arm,mali-400"; reg = <0x10000 0x01c40000>; interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; …

https://pastebin.com/jpG4iGtX Not sure what else more to say. I included the whole upgrade process including the restart in the paste above. I'll now prepare another sd card using a fresh nightly image and check if this boots normal or if nightly is currently broken at all. Edit: Yep. Current nightly is broken. Pretty much the same errors https://pastebin.com/pGAG1iUy Armbian_5.51.180708_Orangepioneplus_Debian_stretch_dev_4.18.0-rc3 Edit2 Armbian_5.51.180706_Orangepioneplus_Debian_stretch_dev_4.17.4 confirmed working.

I have few of i2c devices that was successfully tested working with RPi Zero W (Tiny RTC, BME280), but no one is visible to NanoPi Neo Air board with Armbian. I can't get it to work on latest few versions of Armbian. As soon as I add i2c0 to overlays there appears two of i2c devices (both silent): $ ls -la /dev/i2c* crw-rw---- 1 root i2c 89, 0 Jan 28 14:58 /dev/i2c-0 crw-rw---- 1 root i2c 89, 1 Jan 28 14:58 /dev/i2c-1 I need to admit that scan itself took quite significant amount of time. $ sudo time i2cdetect -y 0 0 1 2 3 4 5 6 7 8 9 a b c d e f 00: -- -- -- -- -- -- -- -- -- -- -- -- -- 10: -- -- -- -- -- -- -…

Hi, How to enable TV-OUT on Orange Pi Zero in Armbian mainline ( 4.19.20 - 5.75)??? I saw a post from one year ago with a patch that adds an overlay called tve, but is there a more integrated solution by now? Thank you

Hello guys! I haven't found any helpful regarding to my problem, maybe you are more professional as me! (I'm not really!) I would like to set an ordered DHT22 temp & humidity sensor to work on this SBC. OS is : NAME="Ubuntu" VERSION="18.04.3 LTS (Bionic Beaver)" Kernel : Linux cubieboard2 5.3.9-sunxi #19.11.3 SMP Mon Nov 18 18:49:43 CET 2019 armv7l armv7l armv7l GNU/Linux I can export a pin as GPIO, and control a simple led. I've built a kernel module for DHT22 found on github : https://github.com/edwardlintw/DHT22 The main problem is, after successful GPIO export : echo 202 > /sys/class/gpio/export cat /…

Hello, I installed Ubuntu Bionic on sdcard and run Kodi on OrangePI but it seems very hot and hang out to reboot every 5mins. Do you encourter the same problem? And how to install Ubuntu into eMCC?

Hi everyone, I'm facing a problem with logrotate on my OrangePi Zero with Armbian Focal mainline. Basically I have a process that is always running with a `tee` command that outputs the stdout to a log file in the /var/log/ directory. My logrotate configuration file looks like the following: /var/log/smartbit/gocpp.log { rotate 10 daily compress missingok notifempty copytruncate dateext } It's all working correctly except the copytruncate part: logs are daily rotated and gzipped but the gocpp.log is not truncated to 0 bytes, so it gets bigger and bigger. I noticed that in this new Armbian version logrotate is not triggered…

Hi All, I'm trying to enable SPI2 on Olinuxino LIME2 board following the instruction of Armbian doc, and the README.sun7i... in the /boot/dtb/overlay directory. It seems I have to enable an spi2 device, but the overlay for SPI2 of sun7i is not present. The related section of armbianEnv.txt is the following: overlays=i2c1 spi-spidev uart2 uart3 uart4 uart5 uart6 uart7 param_spidev_spi_bus=2 param_spidev_max_freq=10000000 What I'm doing of wrong? Thanks in advance PaoloC

Orange Pi Zero 2 After installation Armbian 22.02 Focal stopped loading. help me please in UART outputs the following U-Boot SPL 2021.01-rc4-armbian (Jan 05 2021 - 03:01:27 +0100) DRAM: 1024 MiB

With Armbian 22 (kernel 5.15 and bullseye/jammy) the Orange PI 3 LTS worked great including WiFi, ETH, Bluetooth. Partly thanks to @Ukhellfire and @going. Downloadable here: https://xogium.performanceservers.nl/archive/orangepi3-lts/archive/ Below is what I find the status is for the new Armbian 23 images provided for here : https://www.armbian.com/orangepi3-lts/ Branch current: Main downloads Armbian 23 with kernel 6.1 bookworm: It boots, but every 3rd or 4th keystroke is ignored. No ETH, no WiFi. Armbian 23 with kernel 6.1 jammy: It boots, keystrokes are OK, ETH is OK, but WiFi doesn't work. Branch edge: Rolling release…

How do i enable UART 3 in an orange pi 3-LTS. i checked the /boot/armbianEnv.txt file and it has overlay_prefix=sun50i-h6. i then did a sudo armbian-config > System > Kernel > SYS210 Manage device tree overlays > enabled sun50i-h6-uart3 > reboot. after all that i am still only seeing ttys0 when i do a dmesg | grep tty

Hello I've just started struggling with Lamobo-R1 SATA problems and I'm facing the well-known bad customer service from SinoVoip. With the help of this forum I got finally the HD spinning but I've not seen anything yet related to hd-idle package. I'd like to know if anybody uses it and if the instructions on http://hd-idle.sourceforge.net/ are correct to recompile for the BPI-R1 board. As a matter of fact I'm stuck at the line saying "Run "dpkg...." Thanks! V.

Hello, Environment : Cubieboard2 Linux 4.4.1-sunxi #10 Rootfs on 16Go SDCard Sandisk Ultra Systemctl (disabled ramlog) Hauppauge Nova-TD Stick plugged on a D-Link DUB-H4 Every time I boot my Cubieboard2, dmsg shows me: [ 6.082976] dvb-usb: found a 'Hauppauge Nova-TD Stick (52009)' in warm state. [ 6.083915] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. [ 6.709580] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. [ 6.712670] dvb-usb: Hauppauge Nova-TD Stick (52009) error while loading driver (-12) [ 6.712895] usbcore: registered new interface driver dvb_usb_dib0700 If I unplug and then …

Friends, I need analog audio out working from CLI and not hdmi audio. Anyone knows any patches for LTS or mainline kernel for Orange PI PC. I need them for mainline kernel or LTS only and not legacy. I mean does CLI audio work in mainline or LTS? Please do let me know Thanking you

I can download armbian source code and build. Is there a way to build kernel only for my board NanoPi M1? I haven't tried building Debian, from wiki.friendlyarm.com building kernel only can be done by: ./build.sh -p sun8iw7p1 -b nanopi-h3 -m kernel Is there an equivalent option for armbian? Thanks.

Hi everybody, I recently purchased a Orange Pi Zero since I needed a tiny board, and after setting it up I noticed that the resolution didn't fit properly in a portable TV I was using. Doing some research (I'm a complete newbie), I found the command "h3disp" ot change resolution on Armbian for H2+ and H3 boards, so I gave it a try. Now it's completely black and no signal on AV IN. Thanks to a post in this site, I noticed that every command in h3disp was for HDMI outputs and that doesn't fit Orange Pi Zero since it supports PAL and NTSC only, so now after changing between 480i and 576i doesn't seem to be showing anything at all. I was wondering if I could restore…

Good afternoon, I am using armbian 5.25 on orangepipcplus with legacy kernel. when visiting google.com site with firefox, I will only see the "mobile" site with restricted functionality. On the bottom of the screen there is a link "Google-Ansicht klassisch" which should bring me to the desktop version of google. But when pressing this a popup tries to come up but will not finish its presentation. Now this tab is blocked, I never get to accept google terms and conditions and can not use google. Do you see the same behaviour? Is there any known remedy? PS: Yes, I tried firefox "safe mode" - same thing! Thanks, gnasch

I have downloaded and installed the desktop version of armbian on my Orange PI+ 2e and I have disabled the desktop and gpu with armbian-config as i only access the device through ssh. However I can't figure out how to re enable the gui of armbian so i can use vnc to access my server

I am running the newest version of armbian (5.30) on my Orange PI One, but I run into a strange issue. Whenever I connect an usb dongle (RTL8188EU), it is recognised and works, but two NICs are shown in the network manager. Also ifconfig shows interfaces, where the lsusb shows only one device. Also strange is that one is shown as wlan1, but the other as wlx<macaddress>. Does anyone know what might be causing this issue?

Hi, Is there any sleep or low power modes in orange pi with soft wakeup I want to wake up Orange pi zero at some specific time. For that i go through some forums and searched alot about that but could not found any way to do this. I also go through some 'rtcwake' commands but they didn't work. Any Idea regarding sleep modes and how to wake up would be great help for me. Thanks,

I am using orange pi + 2e, the distribution version of ubuntu I am currently using. How do I start my device under 2 seconds, is there a suitable linux distribution? On the device I only use the python programming language, and some image compression and sending operations are being done.I shut down units like Wireless and Ethernet,Desktop but I did not get much acceleration. What are your suggestions? How much acceleration can I record if I start the version of the armbian mainline in ram disk?

I've had an Orange Pi Zero Plus 2 H5 for a few months, and it is driving me crazy. I can easily boot into the useless Android distro included on the eMMC. I can run most of the distros on the OrangePi website, although they seem to all be missing features or not working 100% in one way or another. I would LOVE to run Armbian on this board. Each time I try, I have huge problems. My video signal is often garbled or at best full of artifacts. I get segfaults every few minutes, and it seems like the filesystem is corrupted. I've tried running it with multiple power supplies (I have several Canakit 2.5amp ones), as well as several different gen…

Hello guys, soon I will receive this nice toy (512MB) and I want to be prepared for my project: a domestic vpn server (using pptp) serving 1 o 2 guests at most. For this project I just need the RJ45 socket thus I would like to switch off as much as possible (e.g. GPU, on board wifi and others if there). Someone can point me to some resources or list what I can do to accomplish this? P.S. I know that pptp is not as secure as IPSec (and maybe IPSec is heavier for such device) but for the purpose of my project it is enough. Thanks a lot Gianni

Hello, I just use the Zero Plus 2 H3 with extension, using Armbian 5.83 but failed to get the combo to play the sound I use the command aplay -l but return no sound card found How to install driver for sound in this board?

Hello Armbian community. I have tried to start the latest image of Armbian Xenial Desktop on my cubieboard 2 and it does not work. I have exactly the same issue as this previous issue:

Hello ! I have a Banana Pi M3 that has 0 output on every pin. I measured 0 output using an oscilloscope. I have been on all of the forums I can think of and I got no answer. How can I make the pins of this damned board work like the ones from a Raspberry Pi ? How does one define a pin ? What does defining a pin means ? Because the pins look dead to me. How do I make them start ? How do I make them to output something... anything ? I am a total and complete noob and I have no idea of the kernel voodoo that has to be done. I am using ARMBIAN 5.83 stable Debian GNU/Linux 9 (stretch) 4.19.38-sunxi

Hello everyone, I know this is a well known problem of the OPi Zero, but in regarding to "solutions": h3consumption works only with the legacy kernel because of the use of Fex Is there a way to tweak the things h3consumption did in the mainline version? In the mainline version from armbian-config it is possible to disable USB, in /etc/default/cpufrequtils it is also possible to set the maximum frequency and wifi can be disabled. Does anyone know any option for disabling the GPU, limit the DRAM clockspeed and the maximum active cores? Is the only possibility to recompile the kernel, at the moment? Unfortunately the main tu…

Good evening, In your opinion, what is the best alternative to the NanoPi NEO2? I don't need wifi or sata. I'm looking for a stable and qualitative armbian with a gigabit and usb port. Is there a better performing armbian that the NEO2 has for less than 40$? Thanks

I bought an orange pi lite 2 and I would like to use it with the ADC MCP3008 but when executing the code in python using the spidev library, it always returns the value of 1023 and when I disconnect the ADC it keeps showing the same value, it is as if there was no communication , The ADC is not the one with the problem since I tried it with an arduino mega and it works perfectly, it is in the orange pi lite 2 where it does not work. the connections are: VDD=3.3V VREF=3.3V AGND=GND CLK= (PC00) SPIO_CLK DOUT=(PC03) MISO DINT=(PC02) MOSI CS = (PC05) SPI0_CS0 DGND= GND import spidev import time spi = spidev.SpiDe…

OK, being away for a while and having 5.x kernel and sunxi_cedrus around I need some directions. I had some embedded 3.x desktop installations in a community museum showing videos (using mpv after a button press) which need revising. So I decided to update the firmware/scripts etc. These are Orange Pi One's... In the past I installed 3.x desktop version as it has better video acceleration. What should I do now? I don't see a focal desktop in downloads. Is it OK to use the focal server, install xfce4 on top of it? Will I have video acceleration? I've been using HEVC .mkv files... Thanks in advance Bülent ~# uname -a Linux myhostna…

I have tried the image for Buster from the Download page for OrangePi PC Plus, and also built new images from current Git repo. In all cases the device bootloops when it tries to start the kernel. The image from the OrangePi website works ok. This looks like a similar issue as experienced recently with CubieTruck and BananaPi A20 boards (https://armbian.atlassian.net/browse/AR-749) which was fixed with a workaround (https://github.com/armbian/build/pull/2963) Is it possibly the same / similar underlying problem?

Hi. Please help me to understand how hardware encoding works in nanopi with H3 chipset. I have newest version of armbianos: cedrus and related modules is loaded by kernel There are following hardware acceleration methods and encoders Please explain me what i am doing wrong here : and here: Thanks a lot.

Normally when you have installed a XFCE-Desktop image for the Pinebook A64 you could set the display brigthness with the following pkexec command to a readable higher level - like I did in the past (possible brightness values are 1-10 - on startup this is only set to 2): pkexec /usr/sbin/xfpm-power-backlight-helper --set-brightness 8 read-out command for the current value: pkexec /usr/sbin/xfpm-power-backlight-helper --get-brightness but on standard CLI-install pkexec and xfpm-power-backlight-helper are missing, so to use this command-line (in /etc/rc.local) you have to install these 2 packages: sudo apt install xfce4-powe…

I will use a orangepi PC2 as openhab server. Arbian 25.2 kernel 6.6.62 minimal.img is installed. The orangepi is connected with an ethernet cable to the router, but is not visible in the list of connected devices. So I suppose he does not make connection. I want to access the orangepi by putty on my PC but as long he is not online, connection is not possible. Led's on the ethernet connector ar flashing. What do I wrong ?