Allwinner sunxi

I have updated the armbian kernel from version 20.11.3 to version 20.11.6 and eth0 only works by forcing the switch to 100FD. If I leave it on automatic, the port negotiates at 1000FD but loses most packets. Any suggestion?

Hello, I've problem use i2c features on newest CTDebian3.8 Jessie os. Exactly i using CT3 with DVK570 extended board witch deploy any signals from CN8 and CN9 slots. I can't see any i2c devices though that i see two buses after used i2cdetect -l: root@ctdev:~# i2cdetect -l i2c-0 i2c sunxi-i2c.0 I2C adapter i2c-1 i2c sunxi-hdmi-i2c I2C adapter root@ctdev:~# i2cdetect -y 0 0 1 2 3 4 5 6 7 8 9 a b c d e f 00: -- -- -- -- -- -- -- -- -- -- -- -- -- 10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 30: -- -- -- -- UU -- -- -- -- --…

Hi, i am actually a bit confused. I thought that a NanoPi Neo V1.0! which is set to 1200Mhz Clockspeed, enabled USB and enabled GPU should burn a additonal 1A (fast) Fuse while doing a 100% Stresstest. It doesn't. Just get more speed and heat... I added an additional Wlan Stick for more powerconsumption... but this doesn't help either. In my opinion and the always stated "on 912Mhz" max 2 Watts... it should kill the 1A on 1200Mhz no? 5V 2W = 1A ... I do a small cluster here and i want to save the GND Rail for shortage to save the other nodes if one Node is melted down and cause shortage. I thought a 1A Fuse has to burn up... but reality is kicking my …

Dont know whats wrong, but none of the images on the page are working, tried to burn them with ApplePI-Baker and Etcher, but no luck. Board boots fine with stock android image. There was someone in here that got it working with an image called Armbian_5.27_Orangepizeroplus2-h5_Debian_jessie_dev_4.11.0.img.xz but where do I download that image ?. And yes I know there is loads of problems, but wanted to test som perfomance on the board. Hope somebody can point me in the right direction

Using Nanopi neo. Linux Lap 3.4.113-sun8i #4 SMP PREEMPT Wed Nov 22 13:45:28 CET 2017 armv7l GNU/Linux I've tried both the Jessie and Ubuntu versions on the site and tried changing the the kernels to 4.x with the next and dev versions. I get similar results in each. Tried to upload diagnostics but got server error I have an IP camera connected directly to the ethernet port with static IP on both the camera and the port. I ssh to the nanopi via wifi. The wifi port is forwarded to the ethernet connection so I can get images from the camera. The ethernet connection seems to drop at random intervals but the time that it down/up are…

Hi, since many month I did not used my BPi M2+ that previously worked with the 5.14 image since not working with the new one 5.25 (sha signature checked = good server image of Debian Jessie downloaded with identical signature). I prepared my SD with the 5.25 armbian image (on the previous 5.14 SD, bad idea) and boot it (with USB/TTL cable and saw in Putty) but it display a message telling me that it does not find ethernet (and even if I insert a RJ45 connected to my router and reboot it this give me the same message). After what it display trying to use pxe (many lines tried some solutions) and finally stop with a prompt "=>". …

I'm using latest armbian with kernel 4.3.3 and got some problem: I have some usb-drives that should be mounted at boot via fstab. But sometimes they are not mounted at boot, after restart they mount normally. Never had problems with same fstab, only with kernel 4.3.3 it sometimes failed to mount. Seen same behaviour with bananian with 4.3-kernel, so maybe it has to do something with this kernel? Maybe some usb modules didn't load before mounting fstab? But i'm linux noob, so i dont know what i can do... Some suggestions?

Hello there, I belong to the group of users that bought a BPi-M2 to just find out that hardware is nothing without software support. First, to my background: I do spend a lot of time at my computer using both Windows and Linux, but I am not a Linux guru. I used to configure and build kernels several years ago, at the time, when we used LILO to boot Linux. My field of interest is real-time sound processing, based on complex filter banks (ideally implemented using multi-threading). For a current project I needed something small, powerful and easily programmable. Since the BPi-M2 has 4 cores and built-in microphone, it seemed ideal for the first tries. Anyway, I…

Hi I have NanoPi-M1 board. It has two type of Ubuntu-Core as you can see here(https://www.mediafire.com/folder/3q2911p1qp33p/NanoPi-M1Board#dc73df73c6dk6) with kernels (3.4.39 amd 4.11.2). But when I try modinfo fbtft It says there is no file or directory like this! But I think it should be exist in kernels with version above 4.10. By the way, I need this kernel support to running my LCD! Are there any Armbian version like Ubunto core with this module support on kernel? Or can I add this support to yhose Ubuntu files in above link? how?

Greetings, Firstly I would like to say that I really appreciate the work that has been done by this wonderful community of developers and users of Armbian. Secondly I am sorry if the problems that I describe here have been already discussed. I have not found anything alike. So I am a proud owner of the OPi PC board. Everything seems to be OK, except some fan issues. What have I done until now: 1. Installed Armbian Jessie Server with RPi Monitor 2. Added a. heatsink on the SoC and RAM chips b. Pi Fan with the case The problems: 1. The fan does not work if connected to the second and fourth pins BUT it works using pins 4 and 6. a. It is extrem…

I've no problem using my Banana Pi with a wifi connection. But if I plug it on my router with a ethernet cable it crashs after a short time. Should I upload the output of armbianmonitor when ETH is plugged? Because it will take me a few tries, to do that.

Hi, my installed version is about a year old at least...so I'd like to upgrade without loosing settings and data. Is this possible? If yes, how? In doc. there is only decribte how to update the kernel, nothing else... Thanks, Astro System says: root@cubie:~# cat /etc/issue Debian GNU/Linux CT Debian 2.7 wheezy root@cubie:~# cat /proc/version Linux version 3.4.104-sunxi (root@cubie) (gcc version 4.8.2 (Ubuntu/Linaro 4.8.2-16ubuntu4) ) #1 SMP PREEMPT Fri Sep 26 18:30:39 CEST 2014

Hi, I tryied a few times to run a RT kernel I built from https://github.com/igorpecovnik/lib as discribed in Armbian documentation and as in https://forum.armbian.com/index.php/topic/1950-orange-pi-pc-plus-armbian-guitarix-guitar-effectprocessor/page-2#entry16460. When executing compile.sh script it patch nice and good, then asks for Preemption Model and I chose 5 for Full Realtime. But when running the kernel into OrangePi it stucks in Starting Kernel. U-boot output: I am not choosing 1-4 for preemption model because I don't know if it will end up as an realtime kernel. The update from the older kernel to the rt one was done by dpkg -i on the deb files from the…

Hello Everyone, I would like to play with my A20 board a bit and would like to use the GPIOs. I checked the forum but it's still not clear what to do and how. Can someone explain to me how to get for example pin 16 on the board? This is the fex: Spoiler [gpio_para] gpio_used = 1 gpio_num = 88 gpio_pin_1 = port:PB20<1><default><default><default> gpio_pin_2 = port:PB21<1><default><default><default> gpio_pin_3 = port:PB20<1><default><default><default> gpio_pin_4 = port:PI03<1><default><default><default> gpio_pin_5 = port:PB22<1><de…

Hi, I can't make usb otg works on orange pi pc armbian stretch. Linux orangepipc 4.19.38-sunxi #5.83 SMP Fri May 3 23:33:25 CEST 2019 armv7l GNU/Linux At boot there is the following message in dmesg: [ 2.252841] usb0-vbus: disabling I tried to enable usbhost0 with armbianconfig overlays, but it doesn't make a difference. Any suggestions ? thanks

Hi all, Creating a DietPi image for BPi Pro based on ARMbian. I finally got a chance to test do_expand_rootfs() from /etc/init.d/firstrun. Now works with multiple partitions, thanks for doing that Having an issue with the onboard WiFi on the BPi Pro (Lemaker). It appears to be enable, active and ready for use, however, I can not get it to scan/connect to a SSID, or even work in AP mode. Built the image using your excellent build tools: [ o.k. ] Building [ Armbian 5.17 Bananapipro Debian jessie default ] root@DietPi:~# iwlist wlan0 scan wlan0 No scan results Fails to set country code. Always returns 00. root@DietPi:~# iw reg set GB root@Die…

Hi all, I try to compile the driver mt7610u from TP-Link AC600 Archer T2UH USB on BPI-M2 and i have this error: root@bananapim2:~/mt7610u_wifi_sta_v3002_dpo_20130916# make clean && make cp -f os/linux/Makefile.clean os/linux/Makefile make -C os/linux clean make[1]: Entering directory '/root/mt7610u_wifi_sta_v3002_dpo_20130916/os/linux' rm -f ../../common/*.o rm -f ../../common/.*.cmd .*.flags .*.d rm -f ../../os/linux/*.o *.ko *.mod.o *.mod.c rm -f ../../os/linux/.*.cmd .*.flags .*.d rm -fr ../../os/linux/.tmp_versions rm -f ../../os/linux/Module.symvers rm -f ../../os/linux/Modules.symvers rm -f ../../os/linux/Module.markers rm -f ../../os/linux/mo…

Hi all, first i want to thank all of you for this great software. Problem: No ethernet on mainline 4.11 kernel. I tracked the problem down to a 'ethernet status = "disabled"' in the dtb for the orange pi zero. How to fix it? I have only very little experience with Device tree. 4.11 is ok for the other OPs, i tested the OP One. Kind regards svollmar

Hi, Since the armbian release 5.3.6 (Linux 8 jessie 4.13.16-sunxi64) does not contain the module 'nls_utf8', one can not use the OpenMediaVault - OMV - plugin 'Remote Mount' for accessing an external HDD ... for example, which is connected to a Fritz!Box (running Fritz!NAS). Further details please see OMV - Remote Mount: How to mount an HDD that is connected to a Fritz!Box 7490? Please include the module 'nls_utf8' (and maybe some more nls_* modules) in an update compilation, which is based on the same kernel. Many thanks in advance. The module is provided in following Debian Jessie file list (image): https://packages.debian.org/jessie/…

Hello. I'm trying to communicate with i2c ( i've connected ADS1115 on it if this maters ), but even without anything connected on it - it shows 0x30 on it, and I am not sure how to make it works. Please help ! 😐

Edit: Nothing was wrong with the Orange PI. I turned out to be my switch. Hi All, Firstly, Armbian is just fantastic. Secondly, this issue is highly likely to have nothing to do with Armbian, but just the cheap crap you'd expect from a cheap SBC. Essentially, after much pain and anguish having bizarre Ethernet connectivity issues with a shiny new Orange PI PC I bought a couple of days, which was: 1. When OPI was connected my network switch (which has four other devices connected to it: two Ethernet and two WiFi), none of the other devices can reliably 'ping' or SSH to the OPI... 25% to 100% packet loss. 2. When connecting the OPI physically directly to ex…

Hello guys, I read a lot but did not find the answer I'm trying to Turn ON / Turn OFF my Orange pi lite HDMI output like with my raspberry pi (with the help of /opt/vc/bin/tvservice -o ... etc) But I'm not able to find a similar command to do it. I only found some tips to do it at start-up only My goal is, after some times, turn OFF HDMI output (via python script) to force my monitor to switch into sleep mode. Do you have any ideas ? Thanks in advance Max

Hi everyone, I want to have a diskless Orange Pi Win, i'm trying to get the Ethernet to work in u-boot, but it does not seem to connect at all with my router when booting, no blinking led at all (none on the Pi neither on the router), I tried différents cables, ports, searched on the web, found some "patches" on DTS file on the web for pine64... But nothing seems to work (but Ethernet works correctly when the Pi is booted on Linux). Any Idea ? Many thanks,

Hello, friends. I am using legacy Armbian 3.x kernel on my development boards where I run Stella emulator with some special USB joystick. The joystick is detected as XBOX controller, hence I guess it uses xpad driver. The problem is that this driver is not present in the latest Armbian so this joystick does not work. I would like to use latest Armbian to have the latest packages, using it as a print/scan/radio server and would like also to play some Atari game from time to time. I tried to build it from the source using this https://github.com/paroj/xpad I can load it with modprobe, the joystick seems to be detected, but it is not working in Stella, I cannot eve…

Hi I'm a newbie to Armbian and just got the Orange Pi Zero. I want it to behave as a keyboard on the OTG port. Right now it works as a serial console. I cant find any docs on this anywhere and I'm not clued up on Linux to mess around too much Can any one help? Thanks in advance.

Hello All, I have Orange Pi one board with Armbian 5.20 Desktop and Kodi/mpv/mplayer installed. I want to make OP1 a home media center. Desktop is set to 1080p60 (1920x1080p 60Hz, by h3disp script). My problem: Everything works perfect when playing videos mkv (x264/h264), mpeg2, mpeg etc. for mpv, mplayer, kodi even 1080p materials. But I have a problem playing videos coded with MPEG4 (popular avi xvid). MPV config: vo=vdpau hwdec=vdpau fs=yes framedrop=vo Video looks like this: http://pasteboard.co/i5YOuOebV.jpg When I use vo=x11 and video is not in fullscreen everyting is OK, on full screen i get: LIBGL: Initialising glshim Playing: The.English.Patie…

OPI pc frequently hangs when transferring from or to file from any usb hdd. OPI PC freezes and never become operative till power shut and boot. kindly post any remedy. rizwan

Hi, currently my small server is running under Armbian 5.16 on Orange Pi Plus 2 board. It is using eMMC as root fs. I am expecting to get Orange Pi Plus 2E to be delivered shortly. The question is if following procedure will be OK to migrate server between boards: before: stop services etc. 1. insert SD card (16GB) when system is running. eMMC is visible as /dev/mmcblk0, SD card will appear as /dev/mmcblk1. 2. use nand-sata-install to copy system to SD Card. 3. mount /dev/mmcblk1 under some mount point, for example /mnt 4. verify, if /mnt/etc/fstab is valid: /dev/mmcblk0p1 / ext4 defaults,noatime,nodiratime,commit=600,errors=remount-ro 0 1 5. modify lin…

Hi, I would like to establish communication between Pi One and a computer through OTG Usb to USB. My goal is to use it to create a serial communication between the PI One and the computer to be able to send quick strings from the PC to the PI. I have a program which only communicate through serial com port and I would like to feed it with data from the PI. Is it possible... to use the physical interface to communicate? Is it possible to establish serial communication between them? I would be very grateful for any extensive help. Thanks in advance! Hi again, I don't think I got closer to the solution... I don't want to use the debug port or th…

Looking for any means of finding a unique and permanent MAC address for opilites. Is there some kind of serial number or other unique number of any kind in an H3 SOC or in something on an OPI Lite board that could be used to derive a MAC ? As things currently are I either have to manually setup the mac for each board I build - in a conf file in /etc/modprobe.d or live with the fact that the board comes up with a new mac/ip with every boot.

I'm trying to develop a kiosk system using an Orange Pi One (Based on Allwinner H3 - Mali400) running Armbian Xenial To do this I need to develop a full-screen GUI application (I don't have much experience in this area) I'm looking for a professional way to do this, Ive spent about a week trying to get Qt to cross-compile from my laptop but not getting much luck, Any ideas / advice welcome, Andy

Been trying to compile the handy sysdig util in armbian. Installed it with: apt-get install -t jessie-backports sysdig sysdig-dkms After the normal install that worked, but when running gave this error: error opening device /dev/sysdig0. Make sure you have root credentials and that the sysdig-probe module is loaded. I tried: /usr/lib/dkms/dkms_autoinstaller start One of the compilation errors I manage to correct commenting the include of asm-offsets.h in /var/lib/dkms/sysdig/0.5.1/build/main.c I also managed to solve the complaints about the lack of fixdep with: make fixdep make bin2c However now when trying to compile it with /us…

Orange Pi Win Plus - no screen image after uboot, during uboot operation, the image on the screen is present. Are there any assumptions how to fix this? i tried use image from orange pi win, looks like boars a similar, difference only in wifi and 2gb memory instead 1gb;

Hello I received my first OrangePi today, a Zero, and I'm a bit lost. Installed armbian xenial, upgraded to beta/dev and installed dev kernel as documented. (working!) But after this upgrade only one CPU core is in use. I've searched, and think my problem may be uboot, can anyone point me in the right direction? (is there a working 4.x kernel with quadcore support?) Thanks! Info: olekvi@orangepizero:~$ uname -a Linux orangepizero 4.9.0-sun8i #16 SMP Fri Jan 6 05:03:52 CET 2017 armv7l armv7l armv7l GNU/Linux olekvi@orangepizero:~$ cat /proc/cpuinfo processor : 0 model name : ARMv7 Processor rev 5 (v7l) BogoMIPS : 48.00 [..] o…

Hi, my OLIMEX micro crashes recently quite often. Even thoug I upgrade to the latest version: "Welcome to ARMBIAN 5.60 stable Debian GNU/Linux 9 (stretch) 4.19.62-sunxi " I was able to catch this trace, any advise? Message from syslogd@micro at Aug 4 16:45:35 ... kernel:[21927.933087] Internal error: Oops: 80000005 [#1] SMP THUMB2 Message from syslogd@micro at Aug 4 16:45:35 ... kernel:[21928.107488] Process dockerd (pid: 1813, stack limit = 0x95696597) Message from syslogd@micro at Aug 4 16:45:35 ... kernel:[21928.118470] Stack: (0xdc807dc8 to 0xdc808000) Message from syslogd@micro at Aug 4 16:45:35 ... kernel:[2192…

hello , i use opi pc + i was install armbian in emmc with nand-sata-install without problems. so after a few mouths of work i would backup emmc. i plug an sd in a usb reader and launch nand-sata-install. i has been just one choise: "boot to sd , systeme on sata usb". all copy was good. but now opi boot only with sd card plug in the usb reader or with a fresh image in sd slot. if i try nand-sata-install from usb reader , i have error message "this toll must run from sd card!" how is it possible to reinstall old systeme (with all my work) in emmc. thanks.

Hello every one, My first post here i'll try to be clear but english is not my mother langage. I bought a couple of opi zero with usb expansion board and a case. I needed small devices able to run a linux daemon and control a bluetooth LE device. They are used as antennas in a bluetooth mesh network. The orange pi zero seemed to be a good choice. I first installed the opizero with armbian 5.24 debian version. Unfortunately I was unable to use bluepy lib. It was the same with the xenial version. Another user of the bluetooth advertisement plugin told me to use last firmware (5.25) and upgrade to 4.x kernel. I was then able to use bluepy lib. I moved the opi zeros …

So I'm back again! - The guy with the Banana Pi's he thought were Banana Pro's. I went and bought one of those stubby little WiFi dongles...fairly generic, Realtek 8192cus...but still (can't believe I'm saying this in public) can't get it up. I'm super frustrated. My current project with these boards is to set myself up some magical WiFi "security" cameras. Everything else works. Webcam works, "motion" detects and records, a little nodejs app manages some scheduling stuff, ssmtp sends me video recordings....but this blasted WiFi!! Help? I'll comment shortly with some technical details/diagnostic dumps(busy re-writing my backup img …

Hello guys, I am trying to blinking POWER_LED on my orange pi lite using google firebase but I couldn't find any resources on internet.... Here is my armbian info; http://sprunge.us/RhTM I want to develop ioT application using orange pi zero coz it has internal ethernet and wifi connection options and it is cheap. What I want to learn is: - I want to develop my ioT application using python - which version OS I should load - proper GPIO or related library for controlling GPIOs and rs-485 and i2c communications Thanks.

I have an Orange Pi Plus 2 that has worked with Android installed for a long time. But now I needed to install Linux on it. I needed to find a Linux image to install on it, and I've already got several, but all the ones that worked, and that were on the login screen, didn't go beyond that, since in none of the 4 USB ports the keyboard worked and I imagine the mouse. I read somewhere that the image Armbian_5.38_Orangepiplus_Ubuntu_xenial_default_3.4.113_desktop.7z or Armbian_5.20_Orangepiplus_Debian_jessie_3.4.112_desktop.7z, but I don't know where to get it, hoping to solve all the problems. Can someone give a helping hand, please?

How often do nightly builds get added. I had a kernel support committed for meshpoint to the Orange Pi H5 repo but there is still no new download and its been over a month.

Hi everyone, I have a problem when work on OPi zero wifi which is running Armbian linux sunxi 4.19.62. I used nmtui to configure wifi connection with static ip. It works fine even rebooting or re-powering up however I tried to power off the router and the result is it has never reconnected again. Next, I plugged in the ethernet cable into RJ45 port, the connection is established. I use sudo ifconfig to show the information, I saw that both the wifi (static) and ethernet are correctly then I can access via ssh or scanning the ip. One again, I continued plugging out the ethernet cable, all connections were disappeared even wifi and connection via ssh is failed. …

dmesg log: ci_irq: highspeed device disconnect [ 1150.728627] ehci_irq: highspeed device connect [ 1151.000116] usb 3-1: new high-speed USB device number 3 using sunxi-ehci [ 1151.294344] usbcore: registered new interface driver rt2870 lsmod log: g@orangepipc:/$ lsmod Module Size Used by mt7601Usta 561549 0 rndis_host 5140 0 cdc_ether 3679 1 rndis_host usbnet 14096 2 rndis_host,cdc_ether cdc_acm 15280 0 mali_drm 2732 1 drm 178255 2 mali_drm usblp 10048 0 pcf8591 3363 0 bmp085 3487 0 mali 123146 0 ump 29379 3 mali btrfs 712409 0 g@orangepipc:/$ ip link …

Hello everybody, I tried building an in-kernel module for USB Dongle Bus 001 Device 003: ID 2357:0120 TP-Link Archer T2U PLUS [RTL8821AU] on my OrangePi Plus. Armbian supplied module from aircrack-ng/rtl8812au has become aging and raises exception errors on modprobe -r. It was deactivated : root@orangepiplus:/etc/modprobe.d# vi blacklist-88XXau.conf #blacklist 88XXau I made a fresh install of Armbian minimal image, then switched to : root@orangepiplus:~# uname -a Linux orangepiplus 6.15.4-edge-sunxi #1 SMP Fri Jun 27 10:13:43 UTC 2025 armv7l GNU/Linux root@orangepiplus:/usr/src# cat /proc/version Linux version 6.15.4-edge-sunxi (build@…

Hi Forum, My CT with "Armbian_5.14_Cubietruck_Debian_jessie_4.6.2" image fails to complete apt-get upgrade and dist-upgrade. I haven't installed or removed any package, simply used the original image as it is. It starts the process, gets the packages, unpacks, starts setting them up and hangs at compiling the new headers. I left it working a full night but found with doing nothing. No cpu or disk activity was seen. Has anyone seen this before? Any idea? Thanks, T

I'm on a years old Orange pi zero H2, an often forgotten single purpose print/scan server board. So i want to upgrade to the latest kernel via armbian-config->system->other(switch kernel). Previously its on 4.19. so when i tried to change to current 5.8.16, 5.8.14, 5.8.12 & 5.8.5, i got "No end-user support: unsupported (stretch) userspace!" it has taken me an hours plus just switching kernel, hoping to find the supported ones. though i dont mind unsupported / legacy kernel, i still prefer the latest supported ones. Is any of the kernel on the list supported? if there none on the list, is there a way to add a supported kernel?…

Hello I upgrade my last version Armbian and after shutdown the system the next day armbian won`t start. I download newest version burnd SC card an after loading is restarting 30 times. So I change new sd card burn one again armbian and is the same. I use converter from HDMI do VGA - and my experience is that converter very stress CPU so i connect directly to TV with HDMI but is the same Could You advice how to install Armbian on my OPI WIN PLUS. Regards\

Hi everyone, I am using an orange pi one to run a table top CNC machine I built and using it to run bCNC to send the g-code to an Arduino. I had downloaded and flashed an image of the Debian Jessie Desktop V5.20 a while ago and it has been working great for other things along the way as well as this project. I had some issues with the bCNC program and decided to uninstall the OS and restart from new. When I did, everything seems normal until I get to the login screen in the terminal area where I have to create a new user account and password and enter my information, then it asks if I want to change the display settings from what I already have which I don't…

Hi guys, today i wanted to access my BPi with armbian installed remote with SSH. Terminal says: port 22: Connection refused. I'm able to ping the BPi. At least last week I was able to access the BPi with remote SSH. When i connect it via HDMI i can see the boot process until it says loading kernel - then the screen turns all black and nothing happens anymore. If I try to access some installed webservices, the browser says it can't connect. What can I do?

Hi! I look for this topic in every place at the internet but all of the topics are not related with my problem. I have a custom board based on the Lime2-emmc. It can boot from SD, but when I tried to copy the same u-boot-sunxi-with-spl.bin to the emmc and try to boot, nothing happends, the screen is empty. dd if=u-boot-sunxi-with-spl.bin of=/dev/mmcblk1 bs=1024 seek=8 boot from SD http://imgur.com/a/OHxzm When it boots from SD the u-boot shows both (SD on MMC0 and EMMC on MMC1) I´m using the A20-OLinuXino-Lime2-eMMC_defconfig with some mods to my board. My emmc is unit is KLM8G1GEME-B041 and is connected to the board like the emmc unit is connected…

Hi Back in February '15 I have started to write an instruction about the setup of a BPi-R1 (Router). In the threads of the Forum, the information is scattered and it takes so much time for each to get along. So I thought such a document would help to become not only faster, but to achieve a better result as well, as you can faster spend time with the device and tweak it. My know how is getting better, but things are still missing. If you like to help the 'community' with your know how, please leave comments in the document if you find errors or you find something missing. Google Docs Thank you in advance - for your support Cheers Tido

This is a simple one, but the most annoying. The only Linux distribution I can not get to work in the Armbian on the Banana Pro. Sandisk 32Gb Class 10 MicroSD card. A USB power supply that does supply sufficient power and current. I write the image to the MicroSD card, insert it into the Banana Pro's card holder, power it up, the red LED lights up and ................. that's where it stops. No heartbeat on the green LED. The one thing I notice is that the image I download has only got one partition on it and that's the ext4 partition. It does not have the small FAT formatted partition and I think this is where it all goes wrong. …

Hi all. I have a problem with network performance. I have a Banana Pi M1+ with Debian Jessie 8.7, kernel 4.9.10-sunxi. I have already read these threads http://forum.lemaker.org/forum.php?mod=viewthread&tid=5802&highlight=performance http://forum.lemaker.org/forum.php?mod=viewthread&tid=12167 and based on them, I applied some changes. I added these settings is my /etc/sysctl.conf net.core.rmem_max = 8738000 net.core.wmem_max = 6553600 net.ipv4.tcp_rmem = 8192 873800 8738000 net.ipv4.tcp_wmem = 4096 655360 6553600 vm.min_free_kbytes = 65536 net.ipv4.tcp_window_scaling = 1 net.ipv4.tcp_timestamps = 1 net.ipv4.tcp_sack = 1 net.…

Previously worked, but not now. I am stuck in the login line and cannot login with the keyboard from the putty screen. I cant login with keyboard on USB2. Also HDMI not working. HDMI previously worked too. I am newbie. Thanks in advance. I cant remember which version loaded on the eMMC. U-Boot SPL 2019.04-armbian (Jul 06 2019 - 20:55:41 +0200) DRAM: 2048 MiB Trying to boot from MMC2 NOTICE: BL31: v2.1(debug):bb2d778-dirty NOTICE: BL31: Built : 20:55:33, Jul 6 2019 NOTICE: BL31: Detected Allwinner H6 SoC (1728) NOTICE: BL31: Found U-Boot DTB at 0xc079e78, model: OrangePi 3 INFO: ARM GICv2 driver initialized NOTICE: PMIC: …

I've tried to connect 5" TFT monitor to OPI with no luck. Cable pinout : T (Left audio) R (right audio) R (video) S (Ground) boot image: Armbian_5.20 scripr.bin section [boot_disp] advert_disp = 0 auto_hpd = 1 output_type = 4 hdmi_channel = 0 hdmi_mode = 4 cvbs_channel = 1 cvbs_mode = 11 output_full = 1 hdmi_mode_check = 1 [disp_init] disp_init_enable = 1 disp_mode = 0 screen0_output_type = 2 screen0_output_mode = 14 screen1_output_type = 2 screen1_output_mode = 14 fb0_format = 0 fb0_width = 0 fb0_height = 0 fb1_format = 0 fb1_width = 0 fb1_height = 0 [hdmi_para] hdmi_used = 1 hdmi_power = "vcc-hdmi-18" [tv_para] tv_used = 0 tv_dac_used = 1 tv_dac_src0 = 0 and…

Hello to all! I have banana pi m2+ with Allwinner H3. OS: ARMBIAN Debian GNU/Linux 8 (jessie) 3.4.112-sun8i I program linux kernel driver. And I am can't run R_UART. I write to register any value, and read value alway zero. It seems that APB0 bus is not cloked. Or device R_UART reset asserted. What I do wrong? Sincerely, Dmitriy.

Hello, I have downloaded and installed Armbian Buster mainline based kernel 4.19.y & Armbian Bionic mainline based kernel 4.19.y from https://www.armbian.com/nanopi-neo-air/ With both versions I have the same problem: WiFi is not working at all ! Before the installation I was running the Friendlyarm factory image and had no problems with WiFi. As I have no internet connection, I can not upload the ArmbianMonitor log. Running this gives no errors. root@nanopiair:~# armbianmonitor -v Starting package integrity check. This might take some time. Be patient please.. . It appears you don't have any corrupt files or packages! …

hi guys, I have reported this on to etcher folks at https://github.com/resin-io/etcher/issues/1466 Not sure if it's a feature or a bug. Cubie truck 3 Any ideas? Etcher version: Etcher-1.0.0-win32-x64.exe Operating system and architecture: windows 8 Image flashed: https://dl.armbian.com/cubietruck/archive/Armbian_5.25_Cubietruck_Ubuntu_xenial_default_3.4.113_desktop.7z Do you see any meaningful error information in the DevTools? Filesystem Size Used Avail Use% Mounted on udev 941M 0 941M 0% /dev tmpfs 189M 5.5M 184M …

When connecting my BPI-M2 the internet connects Wifi, so that there is no network cable connected to it, an interface "eth0: avahi" appears, so I do not have internet access. Can anyone help?

Hello everybody, I have a orange pi zero h2 and when I connect the gpio on some pcb, sometime the pcb inject file inside the linux and create dpkg error. is it possible to enable something to protect the system. thx you

as of some network release before the current (unsupported) 4.11.3 kernel, the networking has started having random value hw mac addresses on every boot. I suspect if you can do so and look @ your DHCP server, you will possibly see the orangepi (or whatever your hostname is) lurking there. Another way to do it if you have to, is to /sbin/ifconfig and get the HWaddr and look for that mac address on your dhcp server. I came by your post while trying to find a workable solution to assigning the mac on the orangepi zero 512 I am bringing up. Jim

Hi there, Recently you helped me to setup a WiFI AP on Armbian and a bananapim2p board: https://forum.armbian.com/index.php/topic/2395-access-point-mode-with-ap6212-on-armbian-521/ The current problem I am facing: the dhd module on armbian 5.25 does not on my bananapim2p boards. To be precise: I have one bananapi m2p where the dhd module loads perfectly on armbian 5.25, I created an image of this board's emmc and flashed the emmc of two different m2p boards. The dhd config file looks like: cat /etc/modprobe.d$ cat /etc/modprobe.d/dhd.conf options dhd op_mode=2 firmware_path=/lib/firmware/ap6212/fw_bcm43438a0_apsta.bin With the modprobe configuration the m2p board…

Hi, I have installed the phoenix suite on a windows seven 64 bits. I start the phoenix suite et make the cubietruck in the mode to flash the nand. Phoenix Suite detect not the cubieboard. It's normal ? How transform your raw file in .img because the phoenix suite accept only the img file ? Is there another method to flash the nand ? Thanks François

Hi again. After 2 years i want to try configure CanBus on BananaPi and still nothing. I'm continuing my previous post What i do: 1) Paths dtb with this instruction : 2) Load kernel modules: # lsmod | grep can can_raw 20480 1 can_bcm 24576 0 can 20480 2 can_raw,can_bcm sun4i_can 16384 0 can_dev 20480 1 sun4i_can 3) Spawn can0 interface # ip link set can0 type can bitrate 500000 restart-ms 100 triple-sampling on loopback on # ip link set up can0 4) Play with candump / cansend On loopback my messages show in candump, but on arduino…

Hi, I just want to inform that probably there is a problem with correct detection of platform. Originally I had everything set for Orange Pi Plus 2E. However, after upgrade avery file is related to Orange Plus (2) - not 2E: Previously in any mentioned file there was orangepiplus2e identifier. Please see also dpkg.log: 2016-09-19 11:00:20 startup archives unpack 2016-09-19 11:00:21 upgrade linux-firmware-image-sun8i:armhf 5.16 5.20 2016-09-19 11:00:21 status half-configured linux-firmware-image-sun8i:armhf 5.16 2016-09-19 11:00:21 status unpacked linux-firmware-image-sun8i:armhf 5.16 2016-09-19 11:00:21 status half-installed linux-firmware-image-sun8i:armhf …

I have been using Debian Jessie on an Orange Pi Plus 2e, but decided to upgrade to Stretch so I could install Chromium (which isn't in the Jessie repositories). I substituted 'stretch' for 'jessie' in /etc/apt/sources.list, then did: $ sudo apt-get update $ sudo apt-get dist-upgrade Everything went OK, until it hung while reconfiguring network manger. I restarted and re-ran sudo apt-get dist-upgrade. Everything else appeared to install OK except network-manager (which is shown as installed but half-configured) and network-manager gnome (which is shown as unpacked and not configured), If I try to fix network-manager using dpkg, this is what i get:…

Hello ! I recently reimaged my BPi M1 with the vanilla headless Debian Jessie from Armbian. But I have two problems: Main problem (the worst): I have a RAID SATA to USB enclosure (this one: BS-EHD-35/DUALB). After some times and randomly, the drives stops spinning and the enclosure stops itself. I've disabled any power management on hard drive, setup a cron job to write a file every 5 min, disabled autosuspend in usb core... I didn't have this problem with the legacy kernel. I cannot downgrade to it, because I'm using BTRFS with some non-compatible extensions. Note: this is a server with apache, Deluge, Plex and Sonarr. Side problems (I can live with if the first is O…

In my Orange Pi One with ARMBIAN 5.27.170422 nightly Ubuntu 16.04.2 LTS 4.10.11-sun8i I install acpi: sudo apt-get install acpi And run sudo acpi_listen And nothing is show when I press the power button. Is normal or my button is damaged? Thanks

Hi Yesterday I've upgraded armbian kernel from 20.11.3 to 20.11.6 version in the available updates with apt update. Once PiPC restarted no wifi connection was found. The wifi dongle is a TP-LINK TL-WN725N and is found with lsusb: Bus 004 Device 002: ID 0bda:8179 Realtek Semiconductor Corp. RTL8188EUS 802.11n Wireless Network Adapter It was working with previous kernels but with 20.11.6 kernel is not listed in ifconfig so I've rolled back to 20.11.3 kernel Any hints or solucions ?? Thanks

Can somebody help me, how to install teamviewer on Orange PI Zero? I want to do it via SSH. How to get ID and password of teamviewer after installing? (which one image https://www.armbian.com/orange-pi-zero/ is best for me? I need to view desktop...)

is this possible? chromium-browser --use-gl=egl [1800:1800:1212/194050:ERROR:gl_surface_egl.cc(479)] EGL display query failed with error EGL_SUCCESS[1800:1800:1212/194050:ERROR:gl_surface_egl.cc(486)] eglInitialize Default failed with error EGL_BAD_DISPLAY[1800:1800:1212/194050:ERROR:gl_surface_egl.cc(479)] EGL display query failed with error EGL_SUCCESS[1800:1800:1212/194050:ERROR:gl_surface_egl.cc(486)] eglInitialize Default failed with error EGL_BAD_DISPLAY[1800:1800:1212/194050:ERROR:gl_surface_x11.cc(68)] GLSurfaceEGL::InitializeOneOff failed.[1800:1800:1212/194050:ERROR:sandbox_linux.cc(345)] InitializeSandbox() called with multiple threads in process gpu-proce…

Hi all, I try to use SPI on the BananaPi M2 Berry. The devices are activated in the configfile and the devices spidev0,0 and spidev1.0 are shown in the /dev .directory but the spi-bus did not work. DMESG shows the following error - messages : [ 0.944871] sun6i-spi 1c05000.spi: Failed to request TX DMA channel [ 0.944893] sun6i-spi 1c05000.spi: Failed to request RX DMA channel [ 0.945987] sun6i-spi 1c06000.spi: Failed to request TX DMA channel [ 0.946006] sun6i-spi 1c06000.spi: Failed to request RX DMA channel OS version is 6.2.12-sunxi Any idea what's wrong ?

Since U-Boot v2025.04 works very well on Orange Pi Zero v3 and has a shorter boot process time, if there was a possibility to switch to U-Boot v2504 for Orange Pi Zero V1, I would be grateful, as would probably other users of this SBC Regards

Hi guys, I'm getting this error while trying to boot my Banana Pi with an SD card. Hit any key to stop autoboot: 0 switch to partitions #0, OK mmc0 is current device Scanning mmc 0:1... Found U-Boot script /boot/boot.scr 2447 bytes read in 211 ms (10.7KiB/s) ##Executing script at 43100000 Wrong image format for "source" command SCRIPT FAILED: Continuing... scanning bus for devices... Found 0 device(s). SCSI device 0: Device 0: not available [...] I'm coming from using Lubuntu with no problems for nearly a year. The SD card works no problem (or at least it worked perfectly fine with Lubuntu). I also tested with a way faster microSD 64GB I usually hav…

Radxa-cubie-a5e second Ethernet port not work after update Armbian 25.11.0-trunk.259.

I'm running a web cam on a OrangePiOne. For the last four days its been performing adequately, at least as well as the RaspiPiZero. At the moment though its suddenly decided to become a snail... slower than paint drying or melting blanc mange. So here I am looking for pointers. I don't have a lot of detail, but what I have follows. I'm using mjpg-streamer to handle the webcam. In the past this has been rock solid without issue, at this point I assume its not the problem in itself. Architecture: armv7l Byte Order: Little Endian CPU(s): 4 On-line CPU(s) list: 0-3 Thread(s) per core: 1 Core(s) per so…

Hello, First of all, I'm new on Armbian I got some a stack dump on the console and can see following messages on kernel.log : --- Oct 24 14:27:28 localhost kernel: [183195.142242] 8<--- cut here --- Oct 24 14:27:28 localhost kernel: [183195.152222] Unable to handle kernel paging request at virtual address 2f68f25c Oct 24 14:27:28 localhost kernel: [183195.167942] pgd = 36f6b267 Oct 24 14:27:28 localhost kernel: [183195.179169] [2f68f25c] *pgd=00000000 Oct 24 14:27:28 localhost kernel: [183195.191263] Internal error: Oops: 805 [#1] SMP THUMB2 Oct 24 14:27:29 localhost kernel: [183195.204864] Modules linked in: brcmfmac brcmut…

Please tell me what to write in the program, so that it was connected by SPI1? import spidev ... """ An APA102 LED is addressed with SPI. The bits are shifted in one by one, starting with the least significant bit. ... void show() Sends the content of the pixel buffer to the strip. Todo: More than 1024 LEDs requires more than one xfer operation. """ def show(self): self.clockStartFrame() self.spi.xfer2(self.leds) # SPI takes up to 4096 Integers. So we are fine for up to 1024 LEDs. self.clockEndFrame() """ void cleanup() This method should be called at the end of a program in order to release the…

Hello, I have a GPIO pin that is high when starting the board. I am trying to force it low. Taking a look at gpio readall +-----+-----+---------+------+---+---Pi ?---+---+------+---------+-----+-----+ | BCM | wPi | Name | Mode | V | Physical | V | Mode | Name | wPi | BCM | +-----+-----+---------+------+---+----++----+---+------+---------+-----+-----+ | | | 3.3v | | | 1 || 2 | | | 5v | | | | 12 | 8 | SDA.1 | ALT5 | 0 | 3 || 4 | | | 5v | | | | 11 | 9 | SCL.1 | ALT5 | 0 | 5 || 6 | | | 0v | | | | 6 | 7 | GPIO. 7 | ALT3 | 0 | 7 || 8 …

Hi guys, I'm trying to solve a very specific problem in our company and after reading several tutorials I'm still not sure, how to achieve my goal. It would nice, if anyone can share his code or help me, however I will also to try to finish it and post the solution here. Idea/Issue: We've upgraded a very old cutting machine with plasma cutter, however there is only a USB port on the device, therefore our colleagues have to go several times per day from office to workshop and swap flashdrives. Thanks to size of our plant this isn't very good solution. Idea is to take Orange Pi One and connect it to the machine through OTG port, therefore it will act as Flashdrive. Th…

I have been searching the net trying to find out how to set up the WiFi interface on an Orange Pi or a Raspberry Pi 3B as an access point. I have to have an access point for a project I have in hand. I found the instructions by Lim Han Yang but they just failed entirely on two out of three candidate boards with the third, an Orange Pi PC Plus, producing a point that is visible to an Android tablet but refused to authenticate. I tried the create_ap procedure from github but that crashed on all three boards when dnsmasq hung. I tried ‘armbian_config’ on the Orange Pi PC Plus which was running the appropriate Armbian image. That didn’t do anything usable. Reasonin…

Hi, is there currently support for NVMe storage in Armbian trunk? I tried to flash the latest build, added nvme ssd storage - but it is not seen in the system. What to check?

Hi, I'm trying to run a DHT22 Temperature & Humidity sensor on my Cubieboard2 but I seem to fail at the beginning on how to use the GPIO Pins correctly What I have: Cubieboard2 Armbian Linux version 4.11.6-sunxi (root@devel) (gcc version 7.1.1 20170510 (Linaro GCC 7.1-2017.05) DHT22 (worked on a Raspberry Pi3 before) What I've done so far: According to this Overview (http://docs.cubieboard.org/cubieboard1_and_cubieboard2_gpio_pin) I connected the sensor on 3v3, GND and on PD25 (LCDDE). As far as I understood the LCD pins can be also used for other things. Followed "Accessing the GPIO pins through sysfs with mainline kern…

Hello, I'm trying to boot an Orange Pi Plus with Armbian 5.20, and it does not work. I've already check that both OPi and my sdcard work fine, because I can flash and boot the images on orangepi.org site. Besides, I checked how u-boot starts with both Armbian and "debian server" orangepi.org image (both attached)

Hi! Is it only me or there are no updates to packages? Let me explain, I'm running jessie server on A20 latest stable kernel and when I run apt-get update, apt-get upgrade there are never updates available. I have experienced this for some of the latest releases and now I'm starting to thing that something is wrong with my system. Especially because I have a raspberry pi and that (yes, I know is raspbian) is getting updates to packages from time to time. I haven't modified or customized anything in the sources list. And the thing is that I'm getting updates for firmware/kernel when they are available. Any ideas? Is it something normal for armbian (/debian)?

Hi, recently moonlight embedded has been added support for VDPAU. git repo I tried to compile it with no success. Unfortunately I dont have enough knowledge to make it work. I used Orange Pi one and armbian 5.30 legacy, getting error no video available and no VDPAU. Does anybody managed to run moonlight on Orange Pi?

Hi All, I'm new here, well been lurking a while reading heaps, just not posting before now. My Orange Pi's arrived a few days ago so I have been playing, I have Ubuntu_xenial_3.4.112 image on both types and am able to connect to home wifi and do apt-get update/upgrade so all good here. One thing I wanted to do is use batman-adv, but the kernel module seems to have been disabled on the armbian images: @orangepipcplus:~# cat /boot/config-3.4.112-sun8i |grep BATMAN # CONFIG_BATMAN_ADV is not set It took me a while to figure out how to confirm this was the case but another post pointed me to the /boot/config-3.4.112-sun8i file. So this is where I need so…

I'm using CT with Armbian 5.25(mainline) server version. The system hangs on every Sundays, and this is the 3rd time, since it hanged two weeks ago for the first time. When I connected a monitor with it, it says.. mmcblk0 : error -5 sending status command, retrying blk_update_request : I/O error, dev mmcblk0, sector 1503312 .... similar messages are repeated.. I have no idea what causes this. I do not use CRON. I installed these packages. Mpd, nginx, nfs server, samba server, deluge-daemon, pure-ftpd, Resilio Sync. Can anyone help me?

Nach dem upgrade kann OMV nicht installiert werden Hallo an Alle Seit gestern geht das Installieren von Openmediavault nicht und zwar auf Armbian 4.8.4 und 4.9.5 Wenn ich Update friert das ganze System ein. Hello everyone Since yesterday, the installation of Openmediavault does not start Armbian 4.8.4 and 4.9.5 If I update freezes the whole System

Hi, I've installed Debian Wheezy with 4.0.5 kernel on my BPI and connected an 1To hd with sata. When i try to mount it, i get : "mount: wrong fs type, bad option, bad superblock on /dev/sda1, missing codepage or helper program" I can mount it on my other server ubuntu 14.04 LTS with no error. Do you have an idea why i can not mount it on BPI ? Maybe it's due to the Guid Partition Table ? Tks Nerek

I know this is a well known topic but since I didn't find an issue like the one I'm having I felt the need of explaining it. I recently bought an Orange Pi Zero board + extension board with AV, micro and 2 additional USB + case. During the 3 days I've been testing it I've been having a lot of issues related maybe to the heat (or maybe not). I have built a streaming media server called Mopidy, which is pretty cool but at certain times it completely hangs when I'm reproducing audio (by the way, I'm using only stable Debian / Ubuntu because kernel 4.11 isn't detecting the soundcard for some reason). It sometimes takes 1 hour to get stuck, …

I'm using OPi LTS and cant change state of PA13-14-15-16 pins. I trying on fresh Armbian Bionic. Checked SPI is disabled. Trying this code for access pins: import OPi.GPIO as GPIO pin = "PA13" GPIO.cleanup() GPIO.setmode(GPIO.SUNXI) #GPIO.setwarnings(False) GPIO.setup(pin, GPIO.OUT) GPIO.output(pin, 1) and take this error altrough write in code "GPIO.cleanup()" ERROR: "UserWarning: Channel PA13 is already in use, continuing anyway. Use GPIO.setwarnings(False) to disable warnings." When trying "GPIO.setwarnings (False)" before change output of pin. Pin voltages when write "1" to output: PA13 -> 3V PA14 -> …

Hello! I wrote the legacy image to a sd card and put it into the card slot. I can see something like diagnostic message and then "starting kernel". After that there is no video output. Neither over VGA nor over HDMI. Is that wanted? I tried 3 different monitors, but no chance. I can connect via ssh after a few minutes, but using a monitor and a screen would help, when there is no network. What am I doing wrong? Greetings, Pille

Hello... I've got an Orange Pi Zero Plus 2 H3 with Armbian Stretch. Kernel: 4.14.70-sunxi armbianEnv.txt: I did: cp -a /lib/firmware/ap6212/fw_bcm43438a1.bin /lib/firmware/brcm/brcmfmac43430-sdio.bin dmesg when searching for "brcm" gives me: [ 8.123186] brcmfmac: brcmf_fw_map_chip_to_name: using brcm/brcmfmac43430-sdio.bin for chip 0x00a9a6(43430) rev 0x000001 [ 8.256708] brcmfmac: brcmf_c_preinit_dcmds: Firmware version = wl0: Oct 8 2016 15:31:47 version 7.46.57.4.ap.r4 (A1 Station/P2P) FWID 01-3621395e es6.c5.n4.a3 In /etc/default/ap6212 I have: PORT=ttyS1 But the scr…

Hello, I am using nanoPi Neo Core with mini shield nanoPi NEO CORE/CORE2. The OS that i am using is Armbian stretch downloaded from this link : https://www.armbian.com/nanopi-neo/ The armbian image that I am using is : Armbian_5.65_Nanopineo_Debian_stretch_next_4.14.78 If I try to enable SPI without doing update and upgrade, it works. If I do update and upgrade and then try to activate SPI, it is not working. I dont find the spi device in /dev. Any idea what could be the problem? P.S: Before last week, I didn't have this problem. So I think it is related to a recent update done on this image. Thanks in advance. …

I have OrangePi Zero and have forgotten password. I have two users, root and ordinary user. Is it possible to change some file on SD card to reset password? Regards, M.

I have couple H3 and A20 devices and all run fine except one - Opi Lite, running latest Arbian (5.26) with built in wifi connected does not close SSH session upon reboot/poweroff. The session eventually times out on client but sometimes I have to kill it manually. There are no modifications to PAM nor systemd-logind configurations and the configuration is exactly the same as on other devices. I'm wondering what may cause this misbehaviour, and how can I fix this? (This topic was created yesterday before db failure/site update and I can't find it now on restored site, I guess it has been lost)

I just updated two Orange Pi One boards and rebooted them to get to the new kernel only to have them boot loop. I know, development, not supported. I'm not asking for a solution, I'm just alerting people to the situation so they can avoid messing up their boxes. Console log attached if you're curious. orangepione.txt

Hello! Sorry, I can't speak english well! A year ago, I buy my Orange Pi PC, and download last image of Armbian, and it work's well. But yesterday, I update my system through apt-get, and notice that there be some kernel packages. There was packages, with "sunxi" or "sunx7" in his names, don't remember well. After this, my Pi stop to working. No SSH, no image from HDMI too. I download new images from https://www.armbian.com/orange-pi-pc/ try both Bionic and Stretch. But both of them don't work. There was an old image, Xenial with kernel 3.4. It works well, but my wifi adapter doesn't work with this kernel. But this adapter, worked with …

Hello I was wondering how can make possible usage of software raid1, using integrated emmc and another card placed into the slot. So far I have used that on Slackware x86 without any issue, but there I tells the Lilo to boot from /dev/md0 for example. Wonder where I should make adjustments here (in Armbian(. Can someone point me at the right direction?