Allwinner sunxi

How install linux-tools for USBIP >usbip WARNING: usbip not found for kernel 5.15.43 You may need to install the following packages for this specific kernel: linux-tools-5.15.43-sunxi linux-cloud-tools-5.15.43-sunxi You may also want to install one of the following packages to keep up to date: linux-tools-sunxi linux-cloud-tools-sunxi >apt install linux-tools-sunxi Reading package lists... Done Building dependency tree... Done Reading state information... Done E: Unable to locate package linux-tools-sunxi I tried linux-cloud-tools-sunxi, linux-tools-5.15.43-sunxi, linux-cloud-tools-5.15.43-sunxi BUT …

Hello, my BananaPi M1 sometimes just stops working. The maximum uptime is 5 days. Usually the time is shorter. The system simply hangs. I can no longer access the system via SSH. When I connect a monitor to HDMI, nothing is displayed, so I can log in. I have connected an external hard drive that is self-powered. I know the stories with the power supply. I have run ' stress -c 2 -m 1 '. The system remains stable. Time CPU load %cpu %sys %usr %nice %io %irq CPU PMIC DC-IN C.St 19:09:19: --- 0.69 10% 5% 5% 4% 0% 0% 49.3°C 42.4°C 5.10V 0/6 19:09:49: --- 2.16 100% 33% 66% 0% 0% 0% 50.2°C 43.6°C 5.10V 0/6 19:10:16: --- 3.18 100% 33% 65% 0% 0% 1% 50.2°C 44.…

Hi all. I understand, maybe my board Nanopi Neo CORE is not supported on the forum, but maybe someone will tell me how to write dts correctly # uname -a Linux NanoPi-NEO-Core 4.14.111 #126 SMP Mon Feb 22 17:04:18 CST 2021 armv7l armv7l armv7l GNU/Linux I compiled and installed ffmpeg with Cedrus H264 and cedar_ve.ko After that I see # dmesg | grep cedar [ 4.982170] cedar_ve: loading out-of-tree module taints kernel. [ 4.988972] sunxi cedar version 0.1 I'm trying to edit and compile /boot/sun8i-h3-nanopi-neo-core.dts using sun8i-h3-nanopi-neo-air.dts First I change before soc reserved-memory { …

Hi all. I'm new, so don't hit too hard. I'm interested in how the NAS Dock for NanoPi Neo2 is defined in the system. I want to install OpenWRT, because I need a NanoPi based router. Armbian seems to me too complicated for such tasks. If you put OpenWRT on NEO2, then NAS Dock is not detected in the system. At that time Armbian determines, I can easily open the HDD or connect devices to the dock's USB port. Please tell me. Which module or driver is responsible for the dock to be defined in the system? The Openwrt forum has not yet been able to help me, so I'm writing here. Help as you can. Скрытый текст Привет всем. Я новичо…

Hi forum members, the apt utility in my bpi m2 zero can't find neither dnsutil nor bind9-dnsutil for bullseye, here the output: pi@fewo-relais:~$ sudo apt install bind9-dnsutils Paketlisten werden gelesen… Fehler! E: Encountered a section with no Package: header E: Problem with MergeList /var/lib/apt/lists/deb.debian.org_debian_dists_bullseye_main_binary-armhf_Packages E: Die Paketliste oder die Statusdatei konnte nicht eingelesen oder geöffnet werden. pi@fewo-relais:~$ pi@fewo-relais:~$ cat /etc/armbian-release # PLEASE DO NOT EDIT THIS FILE BOARD=bananapim2zero BOARD_NAME="Banana Pi M2 Zero" BOARDFAMILY=sun8i BUILD_REPOSITORY_URL=h…

I have set up a server on a nanopi-r2s running Armbian version 5.15.25-rockchip64. It all works fine apart from one thing: while other devices can successfully use BIND on the server, the server itself cannot find the local BIND. If I type in this command host device.localdomain 127.0.0.1 it returns the following: device.localdomain has address 192.168.0.20 192.168.0.20 is the correct address for device.localdomain from the local BIND. If I omit the 127.0.0.1 from the command, it does not find the correct address.: device.localdomain has address 36.86.63.182 device.localdomain has address 36.86.63.182 Host device.localdomain not …

i am installing instapy but have problem with start python file. He's need glibc_2.33 version But latest armbian have 2.31 How to update glibc on OrangePi PC? Or u know how to fix that problem

Hello there, i have one orange pi pc 2 and i need to put this work with 2-Channel Isolated CAN Expansion HAT from Waveshare (2-Channel Isolated CAN Bus Expansion HAT for Raspberry Pi, MCP2515 + SN65HVD230 Dual Chips Solution, Multi Onboard Protection Circuits (waveshare.com) But im stuck with .dts and overlays. This HAT was design to work with raspberry pi but i know we can put it to work with orange pi. My problem is with "chipselect" cause our GPIO pin configuration are diferent then Raspberry Pi Could you please give me an example how should it be my .dts?

I have Armbian 22.02 Bullseye installed on my Orange Pi zero. The wifi connection worked fine at first, but after a few reboots the device 'wlan0' seems to no longer exist. In the Armbian-config settings the entry wifi is no longer present and also in ifconfig wlan0 is no longer displayed. I have now reflushed the system 3 times and always have the same problem.

I have an orange pi zero that I'm going to use as a pi hole. When installing pi hole, I received a "Error: Unable to update package cache. Please try "sudo apt update"." I did just that and received another error stating Err:1 https://ports.ubuntu.com focal InRelease Could not connect to ports.ubuntu.com:443 (2620:2d:4000:1::19). - connect (111: Connection refused) Could not connect to ports.ubuntu.com:443 (185.125.190.39). - connect (111: Connection refused) Could not connect to ports.ubuntu.com:443 (2620:2d:4000:1::16). - connect (111: Connection refused) Could not connect to ports.ubuntu.com:443 (185.125.190.36). - connect (111: Connection refused) Er…

Hi, Nanopi R1 - Kernel and Armbian version: 4.19.62-sunxi #5.92 I have the following problem: If I put the ethernet cable on the interface, and then turn on the nano pi, the interface receives a valid ip. But the problem is, if I start nanopi without the cable connected, and I connect after system boot, the interface does not receive ip configuration. Configs and logs: /etc/network/interfaces: source /etc/network/interfaces.d/* auto eth0 iface eth0 inet dhcp auto eth1 iface eth1 inet static address 10.100.3.1 netmask 255.255.255.0 gateway 10.100.3.1 auto lo iface lo inet loopback up command iptables-rest…

I'm using a NanoPi Neo as Homegear gateway. This requires the SPI interface (/dev/spidev0.0). Yesterday I ran apt-get upgrade, which bumped my kernel from 5.10.60 to 5.15.25. No other changes have been done, Since then no SPI devices are created anymore and the gateway fails! I tried to downgrade the kernel already using armbian-config to 21.08 5.10.60-sunxi. But that reported an error (do not remember the text; was very late) and left the Nano unbootable. I could restore the 5.15.25 kernel by manually editing the zImage symbolic link in /boot. Using param_spidev_spi_bus=1 instead of 0 does not help. …

I built an adapter for a SPI interface SD Card Reader (https://www.ebay.com/itm/161201009722). I'm assuming I need to add in an overlay to make this reader show up, but I am not sure what that should be.

When I login on the console, there is this display with a bunch of information, including the CPU temp. I have need to keep track of my CPU's temp, since it seems to be overheating (I have a heat sink on it, but does not seem to be enough -- I have a fan on order). I want to be able to check the temp from time to time, so I would like to run at least the part of the login banner program. What program is that? I am not seeing anything obvious in /bin.

I have tried 3 Orange Pi 3 images on my orange Pi 3 LTS. None of them will mount the root fs and continue booting. It shows btrfs, but the partition is ext4 and the armbianEnv.txt file has the correct UUID and ext4 stated. I can boot an image from the OrangePi website, so I am 99% certain it is not the power supply or sd card.

Hi form germany, i have problemes with my M1. The system hangs and only ping is working here the last timestamps: do, 14.04. 18:00 so, 01.05. 2:45 do, 05.05. 3:00 mo, 09.05. 15:22 i use Armbian 22.02.1 Focal with Linux 5.15.25-sunxi homeassistant + portainer (docker) mosquitto samba with sata 500gb ssd do we need some other logs? thanks to this nice work 🙂

Remark: on my Orange Pi PC and Orange Pi Plus 2e - everything is OK. Problem occurred on Orange Pi Plus 2 and Orange Pi Zero After upgrading to: [root@PKTEST ~]# uname -a Linux PKTEST 5.10.4-sunxi #20.11.6 SMP Sun Jan 3 21:28:45 CET 2021 armv7l GNU/Linux My "headless" Orange Pi Plus 2 "disappeared from network. I switch it off and connected via serial. I was able to login. Device runs successfully, it is assigning IP to network interface (static assignment) but... there is no connectivity at all (both egress and ingress). [root@PKTEST ~]# ifconfig enx0281cbcd0fcf: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 …

Hi Dear Friends I have Sunvell R69 New version with Ram2 G Official Frimware IS android IS 10 I tested H3-R69-MXQ-S-MXQ4K-8PD3-1.1.4 This frimware Wifi and Sound Not Working Tested T3CH-ASSIS_H3_Stock Rom R69-H3-Allwinner_T3CH-ASSIS All Rom Wifi and Sound Not Working Any Fimware For Share With me ??? To fix this Problem ???? please Help ?

Hi, I followed the following link to create encrypted root. However, every time I boot, i don't see any prompt for password. My armbianEnv.txt is following", but nothing display at "Console" (HDMI) or "Serial" (debug 3 pins next to USB port). ~ Has anyone had any success? I did this for OrangePi Lite 2 (64-bit) H6 and no issue. Thanks

Hello all. I have a Nanopi due2 with Armbian. I've enabled my SPI in armbianEnv.txt file and with: overlays=spi-add-cs1 spi-spidev usbhost0 usbhost2 usbhost3 param_spidev_spi_bus=1 param_spidev_spi_cs=1 but when I try to use "/dev/spidev1.1", CS pin is active high by default not active low. how can I change it to active low.

Hi, After upgrading linux-image-current-sunxi64 package from 21.08.1 to 22.02.1, bringing kernel version 5.15.25, the CPU temperature raised abnormaly on my olimex teres board. Temperature is above 60°C at startup, whithout any activity or load average. The issue persists with latest 5.16.16 kernel from linux-image-edge-sunxi64 package. I noticed temp at startup around 30°C with 5.4.88-sunxi64 kernel, 40°C with 5.10.60-sunxi64 kernel and above 60°C with 5.15+ kernels. Does anyone have cpu temp issue with 5.15+ kernels ?

When i first tried out my orange pi prime in october 2020 i thought i recalled that the wifi worked. With a current armbian image, the wifi can't authenticate. I tried several of the available kernel images. I'm sure that the wpa2 password is correct because I control the router and other devices connect all the time. If i plug in an ath9x usb wifi dongle, that is able to connect, so it would appear to be an issue with the onboard rtl8723bs driver.

Hi all After update kernel from 5.10.60 to 5.15 or 5.16 on my Orange PI PC+ MJPEG-Streamer throws: motion throws: I tried to decrease resolution - even 320x240 not helps. Rolling back to 5.10.60 helps, but it's not very sustainable solution. Are there any known solution for 5.15-5.16?

Last night I downloaded "https://dl.armbian.com/orangepiplus2e/Debian_buster_next.7z" (OPi+2E) ... burned it to SD card and fired up the board ..later installed desktop and other software ...BUT when I was installing MPV I observed that few files with "Vulcan" in their names were also installed...so does that mean that mainline next 4.19.xx images for H3 are now fully suitable for multimedia desktops with Hardware graphics/Video acceleration fully supported ?

Hello Community, I have a (hopefully) quick question about the SATA port on my Bananapi. I wanted to attach a msata card via adapter to my Bananapi, like I already do on my Cubietruck. However when I start look for the msata drive it does not show up. However when I double check the drive via a USB SATA adapter the drive does show up. Could someone please tell me what is going ? Thx, blub4747

Hi forum members, when I try to install the kernel headers via: "sudo apt-get install kernel-headers-$(uname -r)" I gote these errors: Reading package lists... Done Building dependency tree Reading state information... Done E: Unable to locate package kernel-headers-4.19.62-sunxi E: Couldn't find any package by glob 'kernel-headers-4.19.62-sunxi' E: Couldn't find any package by regex 'kernel-headers-4.19.62-sunxi' In the /etc/apt/sources.list the lines with the deb-src links are comments. I've tried to uncomment these but got the same errors. So please can somwone point me right kernel-headers Armbian is using ? Many T…

Hello, Since a week I try moving the OS on the sdcard to an attached SSD. OS: Armbian 5.65 Ubuntu Xenial 3.4.113 desktop Because the BPIM1 has a genuime SATA interface it should work. I have found dozens of tutorials how to do this. Until now I did not find any tutorial that works. Of course I started with nand-install expecting this would work out of the box. But after the install and rebooting I got the notification that it couldn't find the ssd. I guess I have to change something in the bootloader on the sdcard? (I am not a Linux expert but an enthustiastic Linux user) Is there any working tutorial including the final…

Hi all, The plot thickens. This is only an issue when eth0 is given an IPv6 address by my home router. If i disable IPv6 at home my problem goes away. I am having some issues getting wireguard to play the game. I have a fresh Armbian Focal 22.02 install on a NanoPi Neo. The problem is that the wirguard interface comes up, then traffic doesn't flow., not even to the other side of the wireguard link (10.66.0.1). tcpdmping on the other side of the connection shows no packets at all coming into the far ends 51820. Stopping wireguard on both sides and using netcat via UDP and TCP I can see the traffic I expect. I can also use my Android mobile phone and…

Just for info from cnx-software. Orangepi 3 H6 chip is launched!!!!

Hi forum, I ran an apt-get upgrade a few days back and here linux-image-current-sunxi:armhf was updated from 21.05.6 to 21.08.2 After reboot my SATA was gone. There was nothing in the logs which would have indicated that something is wrong. After I reverted back to 21.05.6 apt-get install linux-image-current-sunxi=21.05.6 apt-get install armbian-firmware=21.05.8 apt-get install linux-dtb-current-sunxi=21.05.6 everything worked again. Has anyone experienced something similar ? Regards Volker

Hello. I have a small problem: I can't change the language on my OPi Zero. I have successfully done that with OPi Lite 2 and OPi 3, but for some reason on the Zero when I go to change it, the module fails to load and just quits back to the same "menu page". (essentially does nothing). The only thing I can think of, is that both of the other boards have 1Gb RAM and this only has 512Mb and thus it runs out of memory? That doesn't sound too plausible though - a list of keyboard languages shouldn't take tens or hundreds of megs of RAM. As far as I know, each board is running the same version of Armbian, so that shouldn't be a problem.

Creating a wireless access point through armbian-config fails in the new 22.02 release for the popular TP-Link TL-WN725N USB Wifi Dongle. I am raising it here because it worked previously on 21.08. I have tracked it down to be related to a driver change. Release version 22.02 uses the r8188eu and in fact this is one of the drivers the Hotspot configuration actually warns you about. Could this commit be related? In order to overcome this I have downloaded the official TP Link driver sources. but failed to compile them because headers are missing (even after using armbian-config to install headers). I have also followed the official documentation to learn about…

hello, can you help me to enable SPI please. I have MCP004 with SPI on orange pi zero with armbian , and I dont know how enable SPI comunication. Before I used raspberry pi and there MCP3004 worked fine.

I am really confused about how to connect an LVDS monitor to the board. We used 3.x legacy kernel and used a .fex file for this in the past. But it is time to move to mainline, and it is confusing me. Since LVDS is not plug and play, we need to tell the parameters of the screen somehow. That is clear. I found several ways of pushing parameters to the system: 1. Compile into kernel 2. Compile into U-boot 3. Device Tree 4. Device Tree Overlay 5. Kernel command line According to these articles i have to compile them into U-boot: https://forum.armbian.com/topic/1905-enabling-lcd-in-u-boot-kernel-472/ ht…

Hello. Good day. I'm trying to use the SPI on a OragenPI One Plus (Allwinner H6), and, although I have enable it via the /boot/armbianEnv.txt configuration, communication is not working. Here's the armbianEnv.txt armbian@orangepioneplus:~$ cat /boot/armbianEnv.txt verbosity=1 bootlogo=false console=both disp_mode=1920x1080p60 overlay_prefix=sun50i-h6 rootdev=UUID=19c1886e-0b74-45b8-b9f5-5fbd4bdeb5c2 rootfstype=ext4 overlays=spi-spidev param_spidev_spi_bus=0 usbstoragequirks=0x2537:0x1066:u,0x2537:0x1068:u And here's the SPI device listed under /dev armbian@orangepioneplus:~$ ls -la /dev/sp* crw------- 1 root root 153, 0 nov 28 15:…

/sys/class/leds is not populated when running jammy with kernel 5.16.11

Orange Pi Zero 2 After installation Armbian 22.02 Focal stopped loading. help me please in UART outputs the following U-Boot SPL 2021.01-rc4-armbian (Jan 05 2021 - 03:01:27 +0100) DRAM: 1024 MiB

Hi, is this the right place to ask about support to configure a dtb overlay? I created a .dts file for my ILI9341 TFT display which is connected to a cubietruck running armbian. most of it I copied from the internet and adapted my changed (pin configuration and spi device). Previously I my configuration was done in a fex file and also created a pcb to connect the display to the cubietruck. See german documentation https://klautesblog.blogspot.com/2015/12/ili9341-22-tft-display-am-cubietruck.html?m=1 It worked perfectly but now I’m facing some issues with the new system. Armbian: Armbian 21.08.1 Focal Kernel …

I'm not sure if this is a bug that needs to be reported and I don't know what issues it may be causing, if any. ----< CUT >---- Sep 16 08:55:56 loki kernel: [35972.411737] ieee80211 phy2: brcmf_fweh_event_worker: event handler failed (72) Sep 16 08:55:56 loki kernel: [35972.465736] ieee80211 phy2: brcmf_fweh_call_event_handler: no interface object Sep 16 08:55:56 loki kernel: [35972.465781] ieee80211 phy2: brcmf_fweh_event_worker: event handler failed (72) Sep 16 08:55:56 loki kernel: [35972.471791] ieee80211 phy2: brcmf_fweh_call_event_handler: no interface object Sep 16 08:55:56 loki kernel: [35972.471838] ieee80211 phy2: brcmf_fweh_event_worker: eve…

Clean system does not start after migrating to SSD using armbian-config. Bootlog: Spoiler U-Boot SPL 2020.10-armbian (Aug 08 2021 - 14:54:07 +0200) DRAM: 2048 MiB CPU: 912000000Hz, AXI/AHB/APB: 3/2/2 Trying to boot from MMC1 U-Boot 2020.10-armbian (Aug 08 2021 - 14:54:07 +0200) Allwinner Technology CPU: Allwinner A20 (SUN7I) Model: Cubietech Cubietruck I2C: ready DRAM: 2 GiB MMC: mmc@1c0f000: 0, mmc@1c12000: 1 Loading Environment from FAT... Card did not respond to voltage select! Setting up a 1024x768 vga console (overscan 0x0) In: serial Out: vga Err: vga Allwinner mUSB OTG (Peripheral) Net: eth0: ethernet@1c50000, e…

I have armbian cli from armbian website for orange pi 3 SBC Putty refusing connection Orange pi 3 holds a still red light

Hello Igor, first of all thank you very much for your efforts. I used Armbian in the past and wanted install some up-to-date version. However this fails/hangs independent of selected OS either at 'armbian-resize-filesystem' or 'Flush Journal to persistent storage'. The first boot may take some >15min if succeeds. However i can't login after as it accepts no keyboard input. I started testing upwards from very old version (sorry, i downloaded many and only few by Torrent, but i did send you some donation to cover this). Up to Armbian_20.08.2_xxx_5.8.6 it works well, irrespective of debian/ubuntu flavor. So, the bug came with Armbian_20.11…

Hi, Are there any news on if Armbian will be on the new H5 64bit board? Orange released an Android SDK and an Android image but I guess everyone is waiting for a decent 64bit Debian. Since took the plunge and got into the H5 wagon ordering one, I looked at the released info and obviously there was nothing I could use myself.. So the question goes to the Armbian gurus, guys do you think that there could be an Armbian release for H5 this year? Christos

Hi, I had until yesterday an Armbian version from a year ago on the board, until then I never had problems with my network (WiFi). Yesterday I had then made an apt update + upgrate. After that, however, I suddenly had the problem that some access points are no longer found. This is so that my access point (Fritzbox), my mobile hotspot from smartphone (Samsung) and a network of a neighbor is no longer found. Other access points are still found, so there are still WiFi access points available but I can no longer find mine. Now I have installed the latest version today and still the same problem. Manual entry unfortunately brings nothing because the connecti…

Hi, I was trying to use OrangePi One to add a filter to my USB camera, so that I can apply some image processing to the original input image. The original project uses raspberrypi: https://github.com/likeablob/rpi-wfh-webcam It captures the image from a USB Camera, then applys some image processing on Raspberry Pi. Lastly, it creates a virtual camera that sends the output image to the PC. I would like to achieve the same effect using OrangePi One (Armbian), and the only problem left is to simulate a virtual camera using the USB Gadget. What I tried: $ sudo modprobe g_webcam musb-hdrc.4.aut…

Hi, I'm trying to set a different GPIO state at boot (output 0) on a Orange pi Zero and I couldn't find any solution to this. Can someone tell me if this is possible and if yes how to do it ? Thanks !

I am building kernel 5.10.4 sources on NanoPi Neo 2 with Armbian 20.11.10 Focal and get following error: nanopineo2:~:% cd /usr/src/linux-headers-5.10.4-sunxi64 nanopineo2:linux-headers-5.10.4-sunxi64:% sudo make headers_check nanopineo2:linux-headers-5.10.4-sunxi64:% sudo make scripts nanopineo2:linux-headers-5.10.4-sunxi64:% sudo make prepare scripts/Makefile.build:414: warning: overriding recipe for target 'modules.order' Makefile:1407: warning: ignoring old recipe for target 'modules.order' make[1]: *** No rule to make target 'arch/arm64/kernel/vdso/vdso.lds', needed by 'arch/arm64/kernel/vdso/vdso.so.dbg'. Stop. make: *** [arch/arm64/Makefile:182: vdso…

Good day Armbian Forums! I'm having some trouble with builds of Armbian (up to and including 21.08.6 | kernel 5.10.60-sunxi) seeing wireless access points that are configured to channels 12 & 13 on my Orange Pi Zero Plus2 boards (H3 + 256mb RAM). Specifically, the default Android image (a generic Chinese-language Android multimedia system) that's loaded onto these boards can see and connect to access points that have been set to all channels (1-13) successfully, but any Armbian image I have tried fails to see anything (and subsequently cannot connect) to routers on channels 12 & 13. Due to the nature of this, I believe it may be a region setting or dri…

... [ OK ] Finished Set console font and keymap. [ OK ] Finished Helper to synchronize boot up for ifupdown. Starting Raise network interfaces... [ OK ] Started udev Kernel Device Manager. [ OK ] Found device /dev/ttyGS0. [ 14.547006] thermal thermal_zone0: binding zone cpu_thermal with cdev thermal-cpufreq-0 failed:-22 I just installed Armbian Focal on my Orange Pi Zero and i receive this error on startup, then the boot stops here. It did pass this step a couple times but 90% of the time it will not boot. Thanks in advance, //Hasan

Good morning, I have a NanoPi Neo core where I am trying to use the usb ports (USB1, USB2 and USB3), the first thing to say is that all usbhost is active in armbian-config. The system does not recognize me anything in any of the 3, not a pendrive, or Wi-Fi or anything. If I go to armbian-config, I see that the DTB system that has loaded is that of the NanoPi air, I do not know if it can influence. USB devices receive power when connected. Any idea if I have to activate something else or modify the DTB or something? I have tried adding to armbianEnv.txt this line at the end fdtfile = sun8i-h3-nanopi-neo.dtb but nothing. Thanks and best r…

Hi folks! So first here is the key question: Did anyone get exactly this combination NanoPi Duo2, ov5640 camera, armbian focal running? If YES, HOW … ? 😊 Details below. btw. buster would be also fine... uname -a output is Linux nanopiduo2 5.10.34-sunxi #21.05.1 SMP Thu May 6 20:13:21 UTC 2021 armv7l armv7l armv7l GNU/Linux I’m quite new to Linux and Armbian and have a slight problem using an Nanopi Duo2 and an ov5640 camera. It works pretty well using the image from FriendlyElec. This has been tested using the mjpg-streamer. Due to this success I’m sure the entire hardware setup is correct. Unfortunat…

It's possible I may have uncovered a bug. I'm having a problem getting a remote share to mount on boot. The mount is attempted before the network interface is ready and I've got `_netdev` on the required line in `/etc/fstab` . . . . //192.168.0.160/raspi /zeus/raspi cifs rw,auto,uid=1001,gid=1002,file_mode=0755,dir_mode=0755,_netdev,vers=3,credentials=/etc/.smbcredentials_raspi_01 0 0 Here is the part of `dmesg` that explains the issue better than I can: [ 41.572110] sun7i-dwmac 1c50000.ethernet eth0: PHY [stmmac-0:01] driver [RTL8211E Gigabit Ethernet] (irq=POLL) [ 41.574888] sun7i-dwmac 1c50000.ethernet eth0: No Safety Features suppo…

I cannot compile this module - https://github.com/uboborov/sunxi-cedar-mainline I get this: root@bananapim2zero:/usr/src/sunxi-cedar-mainline# make arch=ARM KERNEL_SOURCE=../linux-source-5.10.60-sunxi make -C ../linux-source-5.10.60-sunxi M=/usr/src/sunxi-cedar-mainline modules make[1]: Entering directory '/usr/src/linux-source-5.10.60-sunxi' MODPOST /usr/src/sunxi-cedar-mainline/Module.symvers ERROR: modpost: "arm_copy_to_user" [/usr/src/sunxi-cedar-mainline/cedar_ve.ko] undefined! ERROR: modpost: "arm_copy_from_user" [/usr/src/sunxi-cedar-mainline/cedar_ve.ko] undefined! ERROR: modpost: "kmem_cache_alloc_trace" [/usr/src/sunxi-cedar-mainline/ceda…

Short issue description: sometimes after pulling a USB device out it makes OPi3 USB host controller stuck. One or more USB ports are getting unresponsive (sometimes all four of them) and no messages in dmesg about connection/disconnection. No matter what device is used. This thing happens only on the first host controller, the second rear one is functioning and responsive. It happens more often if we push in and pull out four devices in a short period of time. Wherein /sys/kernel/debug/usb/devices is stuck too, we cannot read the info from it and all the utils (vi, cat, etc.) are getting the D state (uninterruptible sleep). "lsusb" is also not working, but can b…

Can someone please add support for the onboard microphone to armbian for the Lite2?! It is missing in armbian-config, there is no h6-analog-codec.dtbo in /boot/dtb/allwinner/overlay The microphone is wired up the same way as on the other h6 boards. Thank you very much!

Hello, i update my OrangePiZero OS from Linux 5.10.43-sunxi to Linux 5.10.60-sunxi my screen fbtft spi lcd stop working , the screen is black. If there is a solution to this issue I would love to get help, thanks! here my configuration (work on 5.10.43). (Armbianmonitor link of 5.10.43 on top) (Armbianmonitor link of 5.10.60 Attached as a file ) fbtft.dts /dts-v1/; /plugin/; / { compatible = "allwinner,sun8i-h3"; fragment@0 { target = <&spi1>; __overlay__ { status = "okay"; }; }; fragment@1 { target = <&pio>; __overlay__ { spi1_cs_pins: spi1_cs_pins { pins = "PA13"…

Hi all, Orange Pi One Armbian_20.02.0-rc1_Orangepione_bionic_current_5.4.14 Enable w1-gpio /boot/ambianEnv.txt: overlays=w1-gpio param_w1_pin=PD14 param_w1_pin_int_pullup=1 dmesg | grep -E 'w1|wire' [ 5.271798] Driver for 1-wire Dallas network protocol. [ 5.304021] gpio-110 (onewire@0): enforced open drain please flag it properly in DT/ACPI DSDT/board file What and where else needs to be done?

Hi, i'am desperate with my banana-p1 M1. It is (still) running nicely with an old 'Lemaker' Lubuntu version. But its an old linux version and the are 'iceweasel' issues in combination with https. So, it's a good time to use a (much) newer version of linux. I've tried several versions/downloads of Armbian: debian, ubuntu. I've tried different (tested with F3write/read) SD cards. Used several methods to 'write' the SD-card(s), like 'dd' or the etcher-tool.... ALL results have the same problem. (i've got an picture of the screen, but i can't upload it to this forum???) In sort, it say's: U-boot 2020.10-armbian ..... Allwinner Tech... CPU: Allwinner A20 (SUN7I)…

Dear Armbian Zen Masters, Please, help me turn on bluetooth on my Orange Pi Zero Plus 2 H5 board (running armbian focal server). This board is up to date (apt update and upgrade). I've enabled bluetooth support from armbian-config on this board. But, bluetoothctl is not working (gets stuck in waiting for response on command execution). Wifi is working fine on this board. (I could easily use bluetoothctl on my khadas vim3 pro board with "current armbian xfce desktop" on it) Waiting for your response. (Please, find the relevant board info below.) Thanks in advance, Spherulite. -------------------------------------------…

Hi, i got a Pinebook and install the latest Armbian Image. All is working fine, only the sound output make problems. It isn't matter if i play a mp3 file or a play a YT Video. The sound is just strechted, drawned, like in slow motion. What can i do to solve this issue? Any ideas? Thank you for your help.

Hi, I thought I'd share this in case anyone else is in the same situation as I. I've been trying to get my Orange Pi Lite to boot the latest (Aug 26 2021) images. I've tried Focal, Bullseye and Hirsute, and the Lite doesn't seem to care for any of them. "Armbian_21.02.1_Orangepilite_buster_current_5.10.12_desktop" from the Archive section does boot, as do the versions of Ubuntu and Debian from the Orange Pi website. Perhaps if I had a serial terminal connected I would be able to troubleshoot this, but I don't yet. I'm using a Sandisk Ultra A1 64Gb and I'm monitoring my power supply with my oscilloscope and haven't noticed any dips belo…

Armbian_21.05.1_Nanopiduo_focal_current_5.10.34.img boots (updating via apt upgrade also causes it not to boot any more) Armbian_21.08.1_Nanopiduo_focal_current_5.10.60.img does not When I examine the SD card it hasn't expended from image (makes sense since the heartbeat never starts).

Hello, I am making a board coupled to a NanoPi Neo Core, and a RS485 converter to its UART2. The chip is a MAX1478 and I use the RTS (PA2). this is my armbianEnv verbosity=1 bootlogo=false disp_mode=1920x1080p60 overlay_prefix=sun8i-h3 overlays=cpu-clock-1.2GHz-1.3v i2c0 i2c1 uart1 uart2 usbhost0 usbhost1 usbhost2 rootdev=UUID=a37457d6-57d2-4f17-a684-157b1a309a73 rootfstype=ext4 user_overlays=neo-core-stable-mac double-spi ds1307 param_uart2_rtscts=1 param_uart3_rtscts=1 usbstoragequirks=0x2537:0x1066:u,0x2537:0x1068:u if i run the command, cat /proc/tty/driver/serial |head -8 uart:16550A mmio:0x01C28800 irq:53 tx:120 rx:0 RTS|DT…

Hello, Im currently working on making lima run with an original 5"-LCD on BananaPro. My problem is to make it work with the sun4i-drm driver. At boot everything works fine and the display shows u-boot and kernel outputs but when the kernel starts the sun4i-drm driver the display freezes and turns white after some seconds. dmesg says: [ 11.178221] sun4i-drm display-engine: bound 1e00000.display-frontend (ops 0xc09986d4) [ 11.178361] sun4i-drm display-engine: bound 1e20000.display-frontend (ops 0xc09986d4) [ 11.178858] sun4i-drm display-engine: bound 1e60000.display-backend (ops sun4i_backend_ops [sun4i_backend]) [ 11.179226] sun4i-drm dis…

I'am running the latest Stretch server version on a PiOne (Linux 4.14.65-sunxi). I think that something is going wrong with the logrotate. The rotation is done in /var/log.hdd directory (see also the scripts in /etc/logrotate.d/). But the original file of each is in /var/log directory and is not "cleared" after the rename, because it is not renamed. So, if Zram copies /var/log directory to the /var/log.hdd directory, the original file in /var/log with old logging and included new logging is written to the /var/log.hdd directory. In the next logrotate this growing file is compressed. In this situation/in my case the compressed files contains all the loggings and no…

Hi My Orange Pi PC shows 21.08.5 armbian version in /etc/os-release and /etc/armbian-release but 21.08.2 with uname -v Why don't match the versions ? Thanks

Hello everyone. This happens on my OrangePi after a couple of hours of running. I don't think this happened before installing the kernel 4.14. I haven't changed my power supply, which should be working well - custom DC/DC converter connected to GPIO pins. Is anyone else experiencing this? Anything I can do? [19155.760977] INFO: rcu_sched self-detected stall on CPU [19155.760983] INFO: rcu_sched self-detected stall on CPU [19155.760997] INFO: rcu_sched detected stalls on CPUs/tasks: [19155.761010] 2-...: (1 ticks this GP) idle=18a/1/0 softirq=332295/332295 fqs=0 [19155.761017] 0-...: (0 ticks this GP) idle=dbe/1/0 softirq=475103/475103 fqs=0 [19155.761018] […

The last time I've used this board was around December 2019. Building images or downloaded from Armbian.com and burning them on a SD card worked fine. Now i'm struggling to get it to boot from SD. Tried these images: https://redirect.armbian.com/orangepizeroplus2-h5/Buster_current https://redirect.armbian.com/orangepizeroplus2-h5/Focal_current Also build my own image (to include some extra modules) Armbian_20.08.0-trunk_Orangepizeroplus2-h5_bionic_current_5.7.12 All of them won't get passed "Starting kernel" Serial log: U-Boot SPL 2020.04-armbian (Aug 05 2020 - 07:58:29 +0200) DRAM: 512 MiB Trying …

DTS overlay to activate I2S DAC 5102a on Armbian Buster 5.4.43 armbian-add-overlay sun50i-h5-i2s0-out.dts If you don't have headers armbian-config (software->headers) Manual install whithout headers mkdir /boot/overlay-user/ dtc -I dts -O dtb sun50i-h5-i2s0-out-no-header.dts -o /boot/overlay-user/sun50i-h5-i2s0-out.dtbo add user_overlays=sun50i-h5-i2s0-out to /boot/armbianEnv.txt sun50i-h5-i2s0-out.dts /dts-v1/; /plugin/; / { compatible = "allwinner,sun50i-h5"; fragment@0 { target-path = "/"; __overlay__ { pcm5102a: pcm5102a { #sound-dai-cells = < 0x00 >; compatible = "ti,pcm5102a"; status = "okay"…

First, thanks to everyone here who made this great os. I am trying to read a DS18B20 temperature sensor on my orange pi pc, but I can't get it to work. I hooked up ground and 3.3v to the sensor, the data line I placed it on gpio 20/ physical pin 37 as other posts suggest but it is not reading it. I edited /etc/modules-load.d/modules.conf and modified it to: 8189es gpio_sunxi w1-sunxi w1-gpio w1-therm #gc2035 it loads up in dmesg .... [ 6.030874] W1_SUNXI: Added w1-gpio on GPIO-20 [ 6.039203] Driver for 1-wire Dallas network protocol. .... but it is not visible in /sys/bus/w1/devices/ I tried other gpio sensors, currently I can read from an i2c sen…

Hello, First of all, I'm new on Armbian I got some a stack dump on the console and can see following messages on kernel.log : --- Oct 24 14:27:28 localhost kernel: [183195.142242] 8<--- cut here --- Oct 24 14:27:28 localhost kernel: [183195.152222] Unable to handle kernel paging request at virtual address 2f68f25c Oct 24 14:27:28 localhost kernel: [183195.167942] pgd = 36f6b267 Oct 24 14:27:28 localhost kernel: [183195.179169] [2f68f25c] *pgd=00000000 Oct 24 14:27:28 localhost kernel: [183195.191263] Internal error: Oops: 805 [#1] SMP THUMB2 Oct 24 14:27:29 localhost kernel: [183195.204864] Modules linked in: brcmfmac brcmut…

Hi, I have quiet a problem getting ipsec/strongswan running on my Orange Pi R1. IPSec is configured fine and it connects to my vpn gatway by establishing and ikev2 connection with the help of transform (xfrm) interfaces. After connection everything works fine, but not for long. When I transfer large amounts of data (e.g. iperf3) the whole Orange Pi R1 freezes suddenly. This occours almost immideatly, sometimes i get a couple of seconds a data stream, but mostly it freezes at once. Currently I use even the lates "Linux orangepi-r1 5.9.1-sunxi #20.08.14 SMP Tue Oct 20 23:01:54 CEST 2020 armv7l GNU/Linux" Kernel, and I upgrade…

I use Orange Pi PC+ with installed Armbian 21.08.3 on eMMC. On system i can't access to mmcblk0 device. In dev directory exist only mmcblk2* files related to eMMC. How can I enable access to the SD card ?

Hello, Trying to figure out to get bluetooth working on Cubietruck with Armbian Buster mainline based kernel 5.4.y Installed all software but bluetoothctl keeps telling me there is no default controller. Seems to me the drivers are not loaded/activated. Is this supposed to work or m i trying to fix someting unfixable. Please bump me in the right direction.. Tjabks!

How is i2c1 and i2c2 mapped on Nanopi Duo? I can configure in armbian-config, but all the Duo pin diagrams only show i2c0.

My third Orange Pi Zero came last week, yesterday I plugged it and had heating issues... So I started reading, learning and testing.... Setup: OPiZ-1: 256 MB, no SPI flash - Has extension board plugged - for comparison OPiZ-2: 512 MB, with SPI flash OPiZ-3: 256 MB, with SPI flash (new one with problem) Test conditions: All with (newish) Sandisk Ultra 16 GB Class 10 All new formatted (SD Formatter) and burned/validated (Etcher v1.0.0) with Armbian_5.25_Orangepizero_Debian_jessie_default_3.4.113.img All on my desk - side by side, ambient temperature 25.0-25.1 C (20 cm from boards, no air flow) No case, no passive/ac…

My Opi first not start when i edit armbianEnv.txt. what am I doing wrong? "For proper hardware support you need to edit /boot/armbianEnv.txt and add: fdtfile=sun7i-a20-orangepi.dtb following by reboot."

Hi, I use three ZeroPi hosts as USBIP hosts top just offer USB devices. The kernel till last update on one device was Linux usb2 5.10.43-sunxi #21.05.6 SMP Mon Jun 21 15:07:45 UTC 2021 armv7l GNU/Linux and the new kernel on the once device that makes issues now is Linux usb3 5.10.60-sunxi #21.08.2 SMP Tue Sep 14 16:28:44 UTC 2021 armv7l GNU/Linux The issues are that one of the USB devices become unavailable after some hours and I see this in the syslog: Spoiler Oct 13 18:36:39 usb3 kernel: [43038.026466] usbip-host 4-1.1: failed to unlink 1/1 urb of seqnum 354788, ret -43 …

https://redirect.armbian.com/nanopiduo/Focal_current Tried to flash a couple of times, but it never makes it to the heartbeat led. Will try other releases. This one boots https://armbian.systemonachip.net/archive/nanopiduo/archive/Armbian_21.05.1_Nanopiduo_focal_current_5.10.34.img.xz

I am trying to configure my Banana Pi M2 Zero to use UART to communicate with my 3D Printer. I used Armbian config to setup UART 3 (Pins 8 & 10). I can't seem to communicate over the port. How do I test and do I need to make other config changes? Thank you!

Hello everyone, After many investigations, it was found that its function configuration was incorrect: | \ | | _ \(_) | \ | | ___ ___ | \| | |_) | | | \| |/ _ \/ _ \ | |\ | __/| | | |\ | __/ (_) | |_| \_|_| |_| |_| \_|\___|\___/ Welcome to Armbian 21.08.2 Focal with Linux 5.10.60-sunxi System load: 65% Up time: 0 min Memory usage: 15% of 491M IP: 192.168.4.107 CPU temp: 52°C Usage of /: 8% of 29G Last login: Thu Sep 30 15:58:24 2021 from 192.168.4.98 sam@nanopineo:~$ gpio readall +-----+-----+----------+------+---+-NanoPi-NEO--+------+----------+-----+-----+ | BCM | wPi | N…

Hi! Armbian_21.08.1_Orangepiprime_focal_current_5.10.60_xfce_desktop sometime failed to boot. No green indicator, and black screen. Tried to decrease CPU max frequency sudo nano /etc/default/cpufrequtils ### ENABLE=true MIN_SPEED=480000 MAX_SPEED=1200000 GOVERNOR=ondemand ### but still failed to boot sometimes. Armbian_5.75_Orangepiprime_Debian_stretch_next_4.19.20_desktop have been installed before and boot fine during 2 years.

Because I'm a glutton for punishment, I decided to test a bunch of PCDuino3 images. Hopefully this will be helpful for someone. Feel free to double-check my work. 3.X kernels work perfect. 4.11-4.14 no HDMI Audio 4.19-5.8 there's a bug where the console won't show up if you connect a high resolution screen. It complains about not enough memory reserved for the frame buffer. So if you have a blank screen, it's possibly working, but you just can't see anything. Also, still no HDMI audio even though it's built into the kernel. 5.9-current hangs at "Starting Kernel" showing in the serial port.

Hello, I'm a complete beginner with Armbian and SOC board. I've a bananapi pro board from lemaker and I've installed 6 month ago Raspbian / Jessie and domoticz and all works well until a click unfortunately on update icons of domoticz...and the problems began...no back up...new version of domoticz required buster...image buster not avalaible under raspbian for bananapro.... So I decided to install Armbian/buster_minimal I've serial link on which I can see that board boot correctly. I've installed Armbian-config and the "Default install desktop with browser and extra". I want the board to show information on HDMI…

while updating my dev-OPiOne Welcome to Armbian bullseye with Linux 5.5.8-sunxi package bsp-kernel[20.05.0-trunk] u-boot[20.05.0-trunk] dtb [20.05.0-trunk] firmware [20.05.0-trunk] config[20.05.0-trunk] branch[dev] Linux opi-one 5.5.8-sunxi #trunk SMP Wed Mar 18 21:19:37 +03 2020 armv7l GNU/Linux via apt update I did get the follwing error-message: Trigger für mime-support (3.64) werden verarbeitet ... E: Schreibfehler - ~LZMAFILE (28: Auf dem Gerät ist kein Speicherplatz mehr verfügbar) I did found out via df that /dev/zram0 = /var/log is used up to 100% :( root@opi-one(192.168.6.114):~# df Dateisystem 1K-Blöcke Benutzt Verfügbar…

I know, using an old Banana Pi M1 for desktop doesn't make sense at all. I would prefer having help or/and advice clearing the problems I've encountered, instead a discussion why I'm testing a desktop environment on a BPi M1. Tested with Armbian 21.08.01 Buster / 5.10.60 After the initial boot nano or / and armbian-config doesn't work. A reboot solves this issue. After the second boot I changed verbosity to 7 and console to serial. All other changes where made throu armbian-config. Changing Pi's name works, but changing console's layout doesn't. Never mind, that is a minor problem, which can easily solved by hand. So I did "firmware upgrade" and rebooted m…

Hello i cant get orange pi zero 2 hotspot working with supported image bullseye. Did anyone got it working? Thank you

This is a simple one, but the most annoying. The only Linux distribution I can not get to work in the Armbian on the Banana Pro. Sandisk 32Gb Class 10 MicroSD card. A USB power supply that does supply sufficient power and current. I write the image to the MicroSD card, insert it into the Banana Pro's card holder, power it up, the red LED lights up and ................. that's where it stops. No heartbeat on the green LED. The one thing I notice is that the image I download has only got one partition on it and that's the ext4 partition. It does not have the small FAT formatted partition and I think this is where it all goes wrong. …

**Is this the correct location, or it should be at the other supported boards? It seems that DT overlays are not working root@orangepizero2:~# cat /boot/armbianEnv.txt verbosity=1 console=serial disp_mode=1080p60 fb0_width=1280 fb0_height=720 rootdev=UUID=b8899b39-b6cb-4718-bdbb-e1b39816db74 rootfstype=ext4 overlays=w1-gpio param_w1_pin=PC9 param_w1_pin_int_pullup=1 usbstoragequirks=0x2537:0x1066:u,0x2537:0x1068:u Boot log: Spoiler [41]HELLO! BOOT0 is starting May 13 2020 14:10:04! [46]BOOT0 commit : 593cf83 [48]set pll start [51]periph0 has been enabled [54]set pll end [56]unknow PMU [57]PMU: AXP806 [64]vaild para:1 select dram …

Hello. I can't enable HDMI output for A64 on Orangepiwin platform - every time screen is blank (monitor not active). Monitor connected over hdmi to vga adapter. After linux kernel is loaded - monitor is alived. I try some options in boot.scr withnout effect for u-boot: video-mode=sunxi:1024x768-24@60,monitor=dvi,hpd=0,edid=1 video-mode=sunxi:1024x768-24@60,monitor=dvi,hpd=1,edid=1 video-mode=sunxi:1024x768-24@60,monitor=dvi,hpd=0,edid=0 and setenv console=tty0 hdmi.audio=EDID:0 disp.screen0_output_mode=EDID:1024x768p60 Need help.

There is a patched version that enables noscan=1 , but the one I'm using seems like it hasn't been patched. When there is no AP's around HT40 kicks in ok without noscan=1. With noscan=1 and AP's are around hostapd won't even start in HT20 mode. Any help? root@orangepilite2:~# modinfo 88x2bu|grep version: version: v5.8.7.1_35809.20191129_COEX20191120-7777 srcversion: 43C721C4A870A632EBDE0B5 parm: rtw_chip_version:int root@orangepilite2:~# uname -a && hostapd -v Linux orangepilite2 5.4.43-sunxi64 #20.05.2 SMP Tue Jun 2 17:20:17 CEST 2020 aarch64 GNU/Linux hostapd v2.9 User space daemon for IEEE 802.11 AP management, IEEE 802.…

I supose the armbianmonitor output doesn't help much. But here is an output from serial console: 3 times reseting before.... resetting ... U-Boot SPL 2021.04-armbian (May 06 2021 - 20:01:01 +0000) DRAM: 1024 MiB CPU: 912000000Hz, AXI/AHB/APB: 3/2/2 Trying to boot from MMC1 U-Boot 2021.04-armbian (May 06 2021 - 20:01:01 +0000) Allwinner Technology CPU: Allwinner A20 (SUN7I) Model: LeMaker Banana Pi I2C: ready DRAM: 1 GiB MMC: mmc@1c0f000: 0 Loading Environment from FAT... Unable to use mmc 0:1... HDMI connected: Setting up a 1920x1080 hdmi console (overscan 0x0) In: serial Out: vga Err: vga Net…

Hello guys, I've been playing around with the build-in lima drivers but didn't get it to work on BananaPro using Armbian_20.02.1_Bananapipro_buster_current_5.4.20_desktop image. I installed drivers armsoc, modesetting, fbdev from debian buster repos but "Xorg -configure" fails. /var/log/Xorg.0.log says: and and generated xorg.conf: Any suggestions what I am doing wrong? regards

Hello, I have problems with the u-boot both with the prebuild "Armbian_21.05.1_Nanopineo_buster_current_5.10.34" image from the armbian.com and with the "Armbian_21.08.0-trunk_Nanopineo_buster_current_5.10.59_minimal" image built form sources . First of all, the u-boot versions are different. The prebuilt image has "U-Boot 2021.04-armbian" and the second one - "2020.10" The board boots ok with the both images, but the u-boot does not see the SD card properly and is not able to load the environment file from it: "Loading Environment from FAT... Card did not respond to voltage select! : -110" Is there any fix for this problem? Thanks, …

I'm running gentoo on my Orange Pi PC. it's powerful enough to build gentoo, and its ethernet is fast enough to build from NFS.

I‘m using an OrangePi Lite with the intent to display a 4kp30 video to a 4k TV over hdmi. from reading through the forums I saw that mainline kernel does not support video acceleration - is this information current? after installing the Xenial Image with 3.4 kernel I manage to play 1440p video smoothly two ways with mpv: - windowed if display resolution is set to 4k -fullscreen if display resolution is set to 1080p if I try to run the 1440p video at 4k display resolution in fullscreen, the app crashes with messages about ‚not enough resources to create surface‘ and the framebuffer stays corrupted after that and I have t…

(Finally this forum lets me enter a new topic. It's failing most of the time, making it really hard to solve my actual problem if the infrastructure also fails.) I'm using an Orange Pi Zero board and try to make it talk to a radio module via SPI. The whole thing already works on a Raspberry Pi so the module and cabling is correct. But the module doesn't respond to requests on the Orange Pi. Since this doesn't do anything, I searched for issues like this and along the way found an SPI loopback tool. I tried it and it returned all zeros. The tool readme suggests that the MOSI and MISO pins are not connected, but they are. I checked and resoldered those pins and …

After updating to 5.9.14 from 5.8.16, framebuffer is broken. No output after booting, hdmi monitor goes to sleep. [ 1.455763] ------------[ cut here ]------------ [ 1.455791] WARNING: CPU: 0 PID: 1 at arch/arm/mm/ioremap.c:287 __arm_ioremap_pfn_caller+0x13f/0x14c [ 1.455796] Modules linked in: [ 1.455810] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.9.14-sunxi #20.11.3 [ 1.455814] Hardware name: Allwinner sun7i (A20) Family [ 1.455846] [<c010cce9>] (unwind_backtrace) from [<c010945d>] (show_stack+0x11/0x14) [ 1.455862] [<c010945d>] (show_stack) from [<c093b0ab>] (dump_stack+0x77/0x84) [ 1.455878] [<c093b0ab>]…

Hello, I’m from Russia, I don’t speak English well, I write a translator through Google, I hope you will understand me. My Orange Pi One Plus H6 installed different Armbian image 5.3.9 the system works well, but there is no sound via HDMI, in the pulseaudio tab of the configuration menu it says "there are no cards available for configuration". Did I understand correctly that the H6 processor does not support the audio codec, so there is no sound, or am I doing something wrong? Thanks for the answer.

Hi, I have ten orange-pi pc plus with Ubuntu 20.04.2 LTS with Linux 5.10.43-sunxi burned onto emmc, and twenty orange-pi pc plus with Focal 21.05.6 with Linux 5.10.43-sunxi burned onto emmc. In an attempt to provoke the same issues we have with Xenial on these boxes, I have all of them rebooting (shutdown -r now) once every 10 minutes. They have all been under test for several days. They are all connected to a LAN backbone, but the LAN is not connected to the internet, so whilst they may be attempting to do unattended upgrades, for example, they are all failing. This is a deliberate part of the test. Of the twenty Focal 21 boxes none have failed. …