Allwinner sunxi

I'm using latest armbian with kernel 4.3.3 and got some problem: I have some usb-drives that should be mounted at boot via fstab. But sometimes they are not mounted at boot, after restart they mount normally. Never had problems with same fstab, only with kernel 4.3.3 it sometimes failed to mount. Seen same behaviour with bananian with 4.3-kernel, so maybe it has to do something with this kernel? Maybe some usb modules didn't load before mounting fstab? But i'm linux noob, so i dont know what i can do... Some suggestions?

Hi everyone, I have a problem when work on OPi zero wifi which is running Armbian linux sunxi 4.19.62. I used nmtui to configure wifi connection with static ip. It works fine even rebooting or re-powering up however I tried to power off the router and the result is it has never reconnected again. Next, I plugged in the ethernet cable into RJ45 port, the connection is established. I use sudo ifconfig to show the information, I saw that both the wifi (static) and ethernet are correctly then I can access via ssh or scanning the ip. One again, I continued plugging out the ethernet cable, all connections were disappeared even wifi and connection via ssh is failed. …

I have met an ethernet internal error. error log [ 2.003302] Internal error: Oops: 96000004 [#1] SMP [ 2.008184] Modules linked in: [ 2.011243] CPU: 1 PID: 33 Comm: kworker/1:1 Not tainted 4.19.12-sunxi64 #5.68 [ 2.018458] Hardware name: Orange Pi One+ (DT) [ 2.022909] Workqueue: events deferred_probe_work_func [ 2.028045] pstate: 80000005 (Nzcv daif -PAN -UAO) [ 2.032837] pc : sun8i_dwmac_probe+0x16c/0x550 [ 2.037277] lr : sun8i_dwmac_probe+0x21c/0x550 [ 2.041715] sp : ffff000009273b00 [ 2.045027] x29: ffff000009273b00 x28: 0000000000000000 [ 2.050337] x27: ffff000008d9eb30 x26: ffff000008c023a8 [ 2.…

Hi, Orange PI Lite Armbian 5.25 (latest download available at the time of this post) ARMBIAN 5.25 stable Ubuntu 16.04.2 LTS 3.4.113-sun8i I would like to have the Pi boot without the desktop environment, and either start it manually over SSH. I found a tutorial that said to edit /etc/default/grub and change GRUB_CMDLINE_LINUX_DEFAULT="quiet splash" to GRUB_CMDLINE_LINUX_DEFAULT="text" but that file does not apply, so I'm not sure how to impliment this for armbian. I don't want to remove the desktop environment completely, but rather have it bootup to command line only, and if I need the desktop environment log into via SSH and either re-edit "a file" and…

I try to use DS1302 RT Clock for my Orange Pi One that uses armbian. I connected this way: DS3102 VCC -> OrangePi pin 2 ( 5V ) DS3102 GND -> OrangePi pin 9 ( GND ) DS3102 CLK -> OrangePi pin 3 ( TWI0_SDA ) DS3102 DAT -> OrangePi pin 5 ( TWI0_SCK ) I added i2c0 to overlays of /boot/armbianEnv.txt and rebooted. Now when I run "sudo i2cdetect -y 0", I get nothing: 0 1 2 3 4 5 6 7 8 9 a b c d e f 00: -- -- -- -- -- -- -- -- -- -- -- -- -- 10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 30: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 4…

Hi all! First time poster, i apologize in advance for any etiquette violations... I have an OrangePi Zero H2+ board and the DS18B20 sensor (waterproof version). I have soldered the pullup resistor between power and data cables. I have Armbian Stretch 5.83 with 4.19.38-sunxi kernel. I have enabled the w1-gpio overlay and loaded the w1-therm driver. Data is on PD14 (GPIO 10), power is on 5v (tried also on 3.3v) I can see this in my dmesg: [ 10.371825] w1_master_driver w1_bus_master1: w1_search: max_slave_count 64 reached, will continue next search. [ 58.171052] w1_master_driver w1_bus_mast…

Im tring to access the GPIO using Python3 on a bananapi M1 Linux m5 4.19.38-sunxi #5.85 SMP Wed May 8 14:20:48 CEST 2019 armv7l GNU/Linux I manage to get access to gpio in shell, c, and in python2, but not in python3 with the following software: https://github.com/BPI-SINOVOIP/BPI-WiringPi https://github.com/BPI-SINOVOIP/BPI-WiringPi2-Python The error in python3 is the following (in pyhon2 work) : Traceback (most recent call last): File "/root/src/BPI-WiringPi2-Python/wiringpi2.py", line 18, in swig_import_helper fp, pathname, description = imp.find_module('_wiringpi2', [dirname(__file__)]) File "/usr/lib/python3.5/…

Has anyone successfully configured OPI0 AP working in the mainline kernel? I have tried to use the same configuration file with the 3.4 kernel, the hostapd started successfully, dnsmasq also running, but when client device trying to connect to the AP, the client is not able to obtain the IP address from the dnsmasq-dhcp server. the dnsmasq log: journalctl -f -- Logs begin at Sun 2017-01-22 13:30:20 UTC. -- Jan 22 14:47:52 orangepizero dnsmasq-dhcp[1676]: DHCPOFFER(wlan0) 192.168.43.125 cc:08:8d:d5:92:84 Jan 22 14:48:00 orangepizero dnsmasq-dhcp[1676]: DHCPDISCOVER(wlan0) cc:08:8d:d5:92:84 Jan 22 14:48:00 orangepizero dnsmasq-dhcp[1676]: DHCPOFFER(wlan0) 192.168.43.…

I'm trying to set up an OPi Zero Plus 2 with Armbian Buster. As the board has no soldered USB connectors and mine is still in the mail, I was forced to do all this via the serial console via the three pins on the board. (So no nano or nmtui or anything that has an interface.) I run into a problem where a) I couldn't join my WiFi network and b) NetworkManager refused to believe I don't want to use IPv6. So I had to disable NetworkManager and go the wpa_supplicant route. So now I'm in the position that I got everything to work BUT I have to *manually* enable wpa_supplicant and then issue ifdown and ifup - all via the serial console - at every boot be…

Hello readers, i just tried out the new jessie with 4.0.4. But after start it stops @: ---- Welcome to Debian GNU/LINUX 8 (jessie)! [TIME] Timed out waiting for device dev-ttyS0.device. [DEPEND] Dependency failed for Serial Getty on ttyS0. ----- What am I doing wrong ? Also no LED´s a flickering. Thank you for advice

Hi. I've upgraded Buinic to Eoan and encountered an error with apt-get. Decided to have a fresh install of Disco from https://dl.armbian.com/orangepizero/ and got exact same error. I did nothing with the installation except that I've configured WiFi with ntmui-connect command. So I guess this is some issue with Ubuntu releases 19.xx root@orangepizero:~# apt-get update && apt-get upgrade Hit:1 http://ports.ubuntu.com disco InRelease Hit:2 http://ports.ubuntu.com disco-security InRelease Hit:3 http://ports.ubuntu.com disco-updates InRelease Hit:5 http://ports.ubuntu.com disco-backports InRelease Hit:4 https://apt.armbian.com disco InRelease Traceb…

Hy I'm currently trying to run a DS18B20 Temperature Sensor on the PA20 Port on my Neo Core 2. The w1_gpio und w1_therm modules are loaded but still I can't see the senors in the /sys/bus/w1/devices/ folder. (28-xxxx) Now I read in different threads to edit the FEX file in the /boot/ folder. So I would bee to first covert the script.bin to the script.fex. However I can't find any *.bin file in the /boot/ folder... So is the PA20 Port the correct 1Wire port? And how can I change this port to eg. GPIOG11 if I can't find the script.bin in the /boot/ folder? Andy

Hi! Thanks for your great job. I compiled Armbian_5.32_Orangepizeroplus2-h5_Debian_stretch_dev_4.13.0.img with your building script from git, which included last kernel with Orange Pi zero+ H5 support. Pluged uart-adapter for control booting process. U-Boot SPL 2017.09-rc4-armbian (Sep 05 2017 - 11:03:34) DRAM: 512 MiB Trying to boot from MMC1 NOTICE: BL3-1: Running on H5 (1718) in SRAM A2 (@0x44000) NOTICE: Configuring SPC Controller NOTICE: BL3-1: v1.0(debug):aa75c8d NOTICE: BL3-1: Built : 11:03:29, Sep 5 2017 INFO: BL3-1: Initializing runtime services INFO: BL3-1: Preparing for EL3 exit to normal world INFO: BL3-1: Next image address: 0x4…

Hi, I've installed Debian Wheezy with 4.0.5 kernel on my BPI and connected an 1To hd with sata. When i try to mount it, i get : "mount: wrong fs type, bad option, bad superblock on /dev/sda1, missing codepage or helper program" I can mount it on my other server ubuntu 14.04 LTS with no error. Do you have an idea why i can not mount it on BPI ? Maybe it's due to the Guid Partition Table ? Tks Nerek

Hello Armbian Kernel Team, I own a Cubietruck (CB3) and I wanted to setup a fresh debian server system. So I installed Armbian 5.14 (Debian Jessie) on my SD Card and booted the system up. Everything was working as expected, but I have special needs regarding the usage of my filesystems and storage devices. My desired configuration is (previously working under Armbian Wheezy): Cubietruck NAND -> /dev/nand1 (32 MB) = boot partition -> /dev/nand2 (max) = some data or maybe swap 60 GB SATA Drive (2,5") via SATA to USB adapter -> /dev/sdb1 (5 GB) = root filesystem -> /dev/sdb2 (55 GB) = some data 1 TB SATA Drive (3,5") via native SATA port o…

OrangePi Plus 2e. Used Etcher to write Armbian_5.38_Orangepiplus2e_Debian_stretch_next_4.14.14.img to an Evo+ 32GB. Connected via USB serial (putty). Boot process hangs loading the ramdisk: U-Boot SPL 2017.11-armbian (Jan 25 2018 - 07:57:17) DRAM: 2048 MiB Trying to boot from MMC1 U-Boot 2017.11-armbian (Jan 25 2018 - 07:57:17 +0100) Allwinner Technology CPU: Allwinner H3 (SUN8I 1680) Model: Xunlong Orange Pi Plus 2E DRAM: 2 GiB MMC: SUNXI SD/MMC: 0, SUNXI SD/MMC: 1 *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: phy interface7 eth0: ethernet@1c30000 starting USB... USB0: USB EHCI 1.00 USB1: US…

Orange Pi Zero has two LEDs in the ethernet port and I want to control those leds for system notifications, right now I'm running OpenWrt on the OPiZ and I just need to know which file I have to trigger the LEDs. In GL.iNet router I can control the LEDs by doing echo default-on > /sys/devices/platform/leds-gpio/leds/gl-connect:green:lan/trigger But I don't know how to do that in OPiZ. Please tell me which file I have to edit in order to control the LEDs of the OPiZ

I use Armbian_23.5.1_Orangepi3-lts_bookworm_current_6.1.30. I'm trying to download in armbian-config kernel headers, but linux-headers-5.15.93-sunxi64 are downloaded. How to download kernel headers 6.1.30.?

Hello, I have a problem with uboot, during its scan of USB buses, it blocks for several tens of seconds, displays an error, then boots. Sometimes it blocks completely and it takes several ON/OFF attempts to get it started. I'm using Nano Pi Core LTS with the mini-shield, I have over 20 and it's happening on all of them. This is what is displayed when it finally starts : U-Boot SPL 2020.10-armbian (Aug 08 2021 - 15:18:24 +0200) DRAM: 512 MiB Trying to boot from MMC1 U-Boot 2020.10-armbian (Aug 08 2021 - 15:18:24 +0200) Allwinner Technology CPU: Allwinner H3 (SUN8I 1680) Model: FriendlyARM NanoPi NEO DRAM: 512 MiB MMC: mmc@1c0f000: 0, mmc@1c11000: 1 Loa…

Hi, Initially this started by trying to have proper capture and playback in PCM/I2S port, but it looks like that ALL H3 audio drivers got the same problem, they cannot capture at 24bits, they cannot do HiFi recording despite the Allwinner's datasheet that they do have 24bits in plain audio port and up to 32bits in PCM/I2S/HDMI. I made a very simple test in another thread here and anyone with any H3 board without anything else can do it too -> http://forum.armbian.com/index.php/topic/759-tutorial-i2s-on-orange-pi-h3/?p=17595 Then it popped to my mind to do the most simple of the tests, in the included/onboard audio codec, wich according to datasheet it is w…

Hello all, Firstly, a huge thank you to Igor and team for Armbian, I love it and appreciate you for the effort and time you have dedicated to this amazing project, thank you. I have used Armbian on Cubieboard II for a number of years now, running my main server with QuadlogSCADA for my off-grid renewable system at my home. Now, I have had an Olimex LIME-2 eMMC4GB board sitting idle for a while on the corner of my desk and over the past few weeks have been inspired to do some programming with it. So, on this LIME2 board, I have the latest nightly builds, installed to eMMC, all working fine so far. Then, I though to connect a standard 20x4 ch…

Hi! I'm new to Armbian and I have a problem with Internal Ethernet device on my Orange Pi One. Ethernet link successfully up on boot, but after 2-3 hours it goes down and only restarting it with /et/init.d/networking restart helps for the next 2-3 hours. But after 2-3 hours it goes down again and did not up untill I'll do restart networking manually again. I use the lastest Armbian_5.14_Orangepione_Debian_jessie_3.4.112. This is a log messages, which I found when network fails: Jul 27 16:00:01 localhost rsyslogd-2007: action 'action 17' suspended, next retry is Wed Jul 27 16:01:31 2016 [try http://www.rsyslog.com/e/2007 ] Jul 27 16:00:05 localhost kernel: [ 6087.…

Dear Community, I am actively using an Orange Pi Zero Plus 2 board and I want to build U-Boot mainline by myself. I donwloaded mainline version from Denx's git, but when I'm doing configuration for Orange Pi Zero Plus 2. it uses H5 chip, but my board works with H3. During building Armbian Images, build system downloads latest U-Boot version and build it for H3 chip. I'm new to u-boot and maybe someome will help to find propper configs. Kind regards

hi all, Use an old version of cubietruck. I Can use the new script /usr/lib/nand-sata-install for install my old version? Kernel 3.4.104-sunxi regards

Hello! Please help me. The error occurs with both the camera and even without a camera: 1) root@orangepione:~# modprobe gc2035 root@orangepione:~# modprobe -v vfe_v4l2 insmod /lib/modules/3.4.113-sun8i/kernel/drivers/media/video/videobuf-core.ko insmod /lib/modules/3.4.113-sun8i/kernel/drivers/media/video/videobuf-dma-contig.ko insmod /lib/modules/3.4.113-sun8i/kernel/drivers/media/video/sunxi-vfe/vfe_v4l2.ko root@orangepione:~# dmesg ... [ 341.296379] [ISP] isp platform_id = 5! [ 341.368184] [CSI_ERR][GC2035]sensor_read err at sensor_detect! [ 341.368199] [CSI_ERR][GC2035]chip found is not an target chip. Video device is not created in /dev directory. -----…

Hello, sorry for the dumb questions incoming, thanks for your time. Lately I spent a lot of time searching for a working image to run Kodi with wifi/ethernet/bluetooh on this board. Does anybody managed to play videos on Kodi on this SBC ? If yes, what armbian image should I choose for this purpose ? Do I have to build the image myself ? Tested LibreElec for this but no wifi because the drivers are out-of-the-tree, not in mainline Kernel. Read about my problem in many posts but didn't find what I was searching for... Not even sure if this SBC can be used as a linux media player. Any tip/link/guide/wiki on how to successfully install kodi/har…

Hi there, how do I configure / start an WiFi AP on OPi3? In armbian-config (found using google, and found on OPiPC+) from my current Buster (OOB + update / upgrade) there is NO option to set up an AP. I may configure it "manually" (edit config files) but I need some tutorial if there is no "menu style" config.

I'm trying to build an A2DP server from either OPi Lite or Zero (whichever seems easier). As neither board has BT built-in I'm planning on using some cheap USB BT dongle. Web stores are filled with dongles, but info about their compatibility with Linux (and especially Armbian's legacy kernel) is not that readily available. Has anyone found a dongle that "just works" with OPi Lite or Zero? If yes, care to share e.g. Ali Express link or similar?

I am trying to use gpio without C or Python library, I follow pinout in the wiki : http://wiki.friendlyarm.com/wiki/index.php/NanoPi_NEO_Air 7 GPIOG11 203 modprobe gpio-sunxi echo 203 > /sys/class/gpio/export echo out > /sys/class/gpio/gpio203/direction echo 1 > /sys/class/gpio/gpio203/value LED I connected to Gpio don't light for the moment, I have missed something ? What Linux Gpio may I use ?

Hello, I want to use for my domotic a USB Everspring sa413 (Z-Wave modem based on ZM5304), but this device is not detected on Armbian with my Orange Pi Zero h2+. https://fccid.io/D87-ZM5304-U/User-Manual/User-Manual-pdf-2052478 Normally, I think this dongle is use like CDC/ACM device but I don't understand what wrong because ACM module is loaded. I use actually Debian Jessie next 4.13016. root@orangepizero:~# lsusb -t /: Bus 08.Port 1: Dev 1, Class=root_hub, Driver=ohci-platform/1p, 12M /: Bus 07.Port 1: Dev 1, Class=root_hub, Driver=ohci-platform/1p, 12M /: Bus 06.Port 1: Dev 1, Class=root_hub, Driver=ohci-pla…

Since updating to the (vanilla) 4.3.3 kernel, my Cubietruck has not read the real-time clock at boot time. This causes all log messages to show "Jan 1 01:00:10" until the NTP daemon kicks in. It also causes cron to remain confused about daylight savings until it is restarted. Looking at the release history at http://www.armbian.com/logbook/I see that v4.81 / 28.12.2015 includes a fix for a "Jessie RTC bug". Unfortunately it seems that this release has introduced an RTC bug! What was the fix, and is there an option I can use to reverse it? Before the update the boot messages looked like this: Jan 14 00:45:07 localhost kernel: [ 0.000000] Linux version…

Hello, today I try to recompile armbian and produce some image which can be fited into nor flash. I would like to fit uboot, dtb and kernel into Winbond W25Q128FVSSIG and rootfs into sdcard. So I found some instruction in which I need to modify first kernel and dts (ref. http://linux-sunxi.org/Xunlong_Orange_Pi_Zerochapter SPI NOR flash). For Armbian it is quit difficult, when I issue ./compile.sh than everything regarding to Uboot is cleared. First what I need to do is modify sun8i-h3-orangepi-one.dts with following content &spi0 { status = "okay"; flash: m25p80@0 { #address-cells = <1>; #size-cells = <1>; …

Hi all, I recently purchased an orange pi after developing on the raspberry pi (just for convenience). I got it mainly because the integrated memory could be a real asset both because SD are faulty when making lots of memory accesses and emmc can provide a nice layer of code protection when giving the board to somebody else. I set-up everything without issue and I used the nand-sata-install to move everything to emmc...it worked like a charm. I then placed all my proprietary code on emmc and executed without issues. Problem is, I can obviously still insert an SD card and then mount the emmc and access my code since the SD is booted before the emmc.…

I'm currently running ARMBIAN 5.25 Debian GNU/Linux 8 (jessie) 4.10.12-sunxi on my Cubietruck, which otherwise works fine as a headless data and media server. However, as I don't need any Bluetooth service whatsoever in the given environment, I have been trying to get rid of it - in vain. Is there a safe and lasting method of preventing the Bluetooth module from loading on reboot? Can it be stripped from the system at all completely? Many thanx in advance

Hi guys, I'm fighting with integrated Bluetooth for 3 days. Checked on armbian buster and stretch, and can't make it work. systemctl status ap6212-bluetooth says that there is no such device. Here is output of armbianmonitor -u

Hi, I am using Armbian_5.20_Orangepiplus_Debian_jessie_3.4.112.img with emmc nand flash. I want to make .img file for emmc nand flash. because i am plan to use Phoenixsuit tool.. how can i make emmc nand flash image file? please help me.. thanks.

Hi, I got one of those cheap 300Mbps wifi dongles with 8192EU chip How can we enable this in Armbian? Only lsusb has the following https://ibb.co/gYxyYT

I will try and remember all the relevant details. Going ~ in reverse chronological order here. Earlier this evening, @lanefuwas helping me in IRC (which I greatly appreciate btw) but he had to go to bed. Next step was getting out the UART he said. So I did that, now I come here to report the results: U-Boot SPL 2020.10-armbian (Oct 18 2020 - 23:16:40 +0200) DRAM:Timeout initialising DRAM resetting ... [...repeats...] Prior to that, we were trying to fix the bootloader and/or firmware. At that time the new kernel (latest stable), initrd, etc. all appeared to be in /boot (we had thought maybe sd card was fried, but apparently not). Pr…

Hello everybody. Faced such a problem. When connecting to the HDMI port of the monitor, no image is displayed on the monitor. More precisely, the line at boot time is visible, but the desktop is not displayed. If you connect to a TV via HDMI port, there is an image. I connect OrangePi Plus 2, via HDMI-HDMI cable. Monitor LG FLATRON 27EA33V-BB. Why is that such a problem on armbian and retroorange assemblies. But the assembly of DietPi on the monitor image displays .. The systemist under win7 also without any problems displays the image always. Tell me where to find the solution to the problem. I tried changing the modes with the 'h3disp' utility. Screenshot - https:…

How can I disable the auto login as the root user in the cubietruck ubuntu (XFCE)? That does not sound a good idea. How could I auto login with a different user? The GUI settings editor "display chooser" inside Session Startup doesnt work. I've been looking around how to do that, but in this case I cant find the config file which was supposed to be inside /etc/lightdm/ Thanks and congratulations for your work.

I got my OPi PC2 last week and flashed the latest armbian server version. Every time I enter "reboot" on SSH to reboot the system, or plug in the power cable. The system can not boot up with a great probability. My power source is the charger for SAMSUNG smartphone. The specification indicates it can provide 5V/2A current. With the UART, I found the uboot process was stuck after the statement "INFO: BL3-1: Next image address: 0x4a000000, SPSR: 0x3c9". The LED is OFF in that moment. After plugging out/in the power cable multiple times, the system can be boot up successfully finally and works very well. I'…

So I'm back again! - The guy with the Banana Pi's he thought were Banana Pro's. I went and bought one of those stubby little WiFi dongles...fairly generic, Realtek 8192cus...but still (can't believe I'm saying this in public) can't get it up. I'm super frustrated. My current project with these boards is to set myself up some magical WiFi "security" cameras. Everything else works. Webcam works, "motion" detects and records, a little nodejs app manages some scheduling stuff, ssmtp sends me video recordings....but this blasted WiFi!! Help? I'll comment shortly with some technical details/diagnostic dumps(busy re-writing my backup img …

Is it possible to shut down power to a particular USB port? I have a sensor that is using USB also to power itself. I don't need it running all the time - hence - I'd like to turn it off.

hi, i would like to make videos with a orange pi as basis and would like to start with this camera: which came with my pi. thought it would run out of the box...but it doesnt after looking trough the forums it is obvious that camera support seems to be quite problematic but i found this thread: where at the end the user: IgZero says that he got some camera (maybe not mine) working with 5.20 and then updating it to the current version. but he does not say if he started with a debian or ubuntu based source.... any ideas on how to get this camera going? im also willing to flash another, even older versi…

I’m running Armbian debian minimal image on my Orange Pi Zero 3, using the onboard WiFi (wlan0) with the unisoc_wifi driver. The WiFi consistently drops with logs like these: [ 11.048517] unisoc_wifi wlan0: mixed HW and IP checksum settings. [259241.515808] unisoc_wifi wlan0: sprdwl_report_connection Asus failed status code:30! [345665.483530] unisoc_wifi wlan0: sprdwl_report_connection sm_state (5), status: (2)! [345665.483567] unisoc_wifi wlan0: sprdwl_report_connection Asus failed status code:1! NetworkManager also reports: link timed out. Activation failed for connection 'Asus' After the crash, restarting NetworkManager doesn’t reso…

Hi I'm a newbie to Armbian and just got the Orange Pi Zero. I want it to behave as a keyboard on the OTG port. Right now it works as a serial console. I cant find any docs on this anywhere and I'm not clued up on Linux to mess around too much Can any one help? Thanks in advance.

After upgrading from the official version with kernel 6.1 to the CSC version with kernel 6.6 I noticed an increase in CPU temperature of as much as 10 degrees. Is this normal? Honestly, seeing 52 degrees at idle worries me a bit

I'm relatively new to embedded linux so apologies if there's a simple answer to this question or if I'm not providing the necessary information. And if there's a concept here that I clearly don't understand please point it out as I'm doing all of this as a learning exercize. I am attempting to use the ADXL345 accelerometer with my Orange Pi One. Using the i2c tools I'm able to communicate with the device but would like to use the linux drivers found here: https://wiki.analog.com/resources/tools-software/linux-drivers/input-misc/adxl345 I've tried using modprobe to insert the module but it seems it's not available and I'm unsure why as I be…

Hi all! On NanoPi Duo2 I'm trying to use the builtin video hw processor. ffmpeg already works with -hwaccel v4l2request but throws errors: Press [q] to stop, [?] for help [h264 @ 0x11645f0] Using V4L2 media driver cedrus (6.12.35) for S264 [V4L2RequestContext @ 0xae5f0db0] Failed to create buffer of type 1: Cannot allocate memory (12) [h264 @ 0x11645f0] Failed setup for format drm_prime: hwaccel initialisation returned error. dmesg [ 8906.864389] cma: __cma_alloc: reserved: alloc failed, req-size: 3038 pages, ret: -12 [ 8906.872255] cma: number of available pages: 42@86+128@384+34@3550+34@6622+34@9694+34@12766+34@15838+34@18910+34…

I downloaded and wrote the image to the SD card. I can see the U-Boot messages at the very beginning, but after a few moments, nothing is displayed anymore. I believe the OS is still booting because the activity LED on the board keeps blinking. Any idea what might be happening ? Thanks in advance for any help !

I'm running a dockerized VDR server on the BPi, still on bananian. Every time I installed armbian, I had to discover that video playback on remote devices started to stutter. Without knowing about the details, my guess is that this is owed to the fact that the mainline kernel build does not feature hw video decoding. (Though I'm not sure whether bananian had it actually.) Unfortunately I cannot use the legacy kernel build, as docker is not supported on that platform. Is there any chance to kind of enable hw video acceleration on the mainline build? I saw some posts here and there in the forum on that topic, but none seemed really having solved it d…

I am really confused about how to connect an LVDS monitor to the board. We used 3.x legacy kernel and used a .fex file for this in the past. But it is time to move to mainline, and it is confusing me. Since LVDS is not plug and play, we need to tell the parameters of the screen somehow. That is clear. I found several ways of pushing parameters to the system: 1. Compile into kernel 2. Compile into U-boot 3. Device Tree 4. Device Tree Overlay 5. Kernel command line According to these articles i have to compile them into U-boot: https://forum.armbian.com/topic/1905-enabling-lcd-in-u-boot-kernel-472/ ht…

Hello, I have orange pi zero with armbian and i need to upgrade kernel to version 4.x how to do it? ARMBIAN 5.38 stable Debian GNU/Linux 9 (stretch) 3.4.113-sun8i is it possible at all?

Hello, I've purchased a 2e recently, in order to replace a RPI3 with a more powerful device (and get graphics acceleration, be able to watch youtube videos, etc). I've tested multiple builds, and even on the legacy kernel, there is just no way to get it to work properly. The board, when it sits completely idle, is between 48 and 52°. And if I move a window on the desktop, it's all laggy and the cpu jumps to 60+° --the same with a mainlain image in fact, in headless mode... frequently the console would freeze for a couple seconds while the temperature is very high for no reason. It seems there is no hardware graphics acceleration, ever. Curr…

Have anyone succeeded in installing qmake on OrangePi PC?

This topic has been discussed earlier but there is not concrete mechanism explained to achieve this. Ideally I would like to display a boot logo or boot splash during startup. The device is Orange Pi Plus 2e. As per experience and as mentioned on this forum earlier plymouth was not useful in this case. I tried to set logo="enabled" in /boot/armbianEnv.txt but this doesn't help. When Armbian loads for first time on the device from the image downloaded from this site, it displays 'Initializing Boot Loader' logo image. Pretty cool!!! Can we have something like this for a custom image displayed each time on reboot. I under…

Hello everybody! Can I read data from the RFID-MFRC522 module with my NanoPi, if so, tell me what python libraries are in Armbian or will it be necessary to install an official ROM and work through RPi.GPIO?

Hi, First of all: Thank you for all the great work that you're doing, Igor! I really appreciate it. And sorry for my english. I try to install Armbian (debian jessie legacy kernel) on the NAND on cubieboard1, but I think that the installation doesn't go to the end. Initially, a lubuntu was installed on NAND (http://docs.cubieboard.org/tutorials/a10-cubieboard_lubuntu_desktop_releases) and operated normally. I booted with Sdcard "Armbian" (Armbian_4.5_Cubieboard_Debian_jessie_3.4.109) and I run ./nand-sata-install: It will tell me, all data will be deleted on nand, and after a second or so it will inform me, should reload that script after reboot after reboot, I run…

Hello everyone, I want to make up a RAID 1 array with two disk, but mdadm tells me that I can't find the md_mod module : mdadm: Note: this array has metadata at the start and may not be suitable as a boot device. If you plan to store '/boot' on this device please ensure that your boot-loader understands md/v1.x metadata, or use --metadata=0.90 Continue creating array? y modprobe: FATAL: Module md_mod not found in directory /lib/modules/4.19.13-sunxi64 mdadm: Fail create md0 when using /sys/module/md_mod/parameters/new_array mdadm: unexpected failure opening /dev/md0 I looked up the /lib/modules/4.19.13-sunxi64 directory,…

Greetings, i want to run some shaders on a headless OrangePI Zero (H2+/Mali 400 running standard Armbian on mainline kernel). I saw there are drivers available now. Is there a binary blob of the driver available somewhere? Or maybe a simple HOWTO? I don't want to mess with driver compilation if I don't have to. I just want to run my shaders on that GPU.

Greetz // Pozdrav vsem uporabnikom vsezmagovalcev! I am planning to use my Cubietruck for a general-purpose desktop computer to surf the internet, write documents, watch movies (youtube, VLC, lan/dlna), etc. Basically I'd like to install a lightweight desktop image on it and connect it to my SmartTV in the living room via a short HDMI cable. I'll probably need video acceleration for a 1080p resolution. Thing is I'm currently in a bit of a dilemma because there are so many premade images out there, and most of them seem outdated. Can you recommend me which image to use for my goal (possibly a LTS release)? I've been leaning towards Lubuntu, but I see debian has som…

TL;DR: The small H2+/H3 boards unlike their bigger siblings are all prone to overheating due to smaller PCB size (on the larger boards the PCB's groundplane acts somewhat as a large heatsink dissipating heat away from the SoC). Due to mainline kernel settings not being optimized currently all these boards are slower under constant load compared to legacy kernel. This should change but won't unless someone is looking into it and spends some time on this. Two areas that deal with this overheating tendency or are somewhat related are thermal protection / throttling: use the thermal sensor(s) inside the SoC to downclock various engines if specific tre…

I would like to remove "everything" from the installation, which I don’t need, with the goal to minimize the footprint. I installed tasksel and its show a lot of packages on disk... so my question is what can be removed to keep a basic ubuntu server without a desktop interface and with some most used functions and files. I tried to remove some of them, like… ubuntustudio-videoubuntustudio-photography ubuntustudio-graphics mail-server ubuntu-gnome-desktop ... I can imagine to remove all CD installation and images as well... …but my problem is that if I for example remove “ubuntu-gnome-desktopâ€, the OPI Zero is not answering on ssh request any more. So, for me…

Hi, Seen some posts where mentioning that depending of the version of kernel there is either FEX or DTS usage, old ones called Legacy, using FEX to define GPIOs and Peripherals pins. Wit Mainline Kernel, is using DTS. Yet in the recent kernel (dev) armbian builds, eg armbian 5.21, kernel 4.7.6 (on H3, NEO), seen the /boot containing all the FEX stuff script.bin etc. Is FEX still used in the mainline kernel builds? C:\Christos>ssh christos@192.168.1.131 christos@192.168.1.131's password: setsockopt IP_TOS 16: Invalid argument: _ _ ____ _ _ _ | \ | | __ _ _ __ ___ | _ \(_) | \ | | ___ ___ | \| |/ _` | '_ \ / _ \| |_) | | | \| |…

Hi im not Linux user not all, can someone point me how to enable SPI ? I try this: Enabling SPI Enable the hardware through config: sudo armbian-config switch on SPI in System>Hardware>SPI-spidev & save Update /etc/modules: sudo nano /etc/modules to include the following line: spi-dev Update /boot/armbianEnv.txt : sudo nano /boot/armbianEnv.txt to include the following: param_spidev_spi_bus=1 #origianl is 0 but the resonance measurement.py module expects 1 so easier to fix here param_spidev_max_freq=100000000 The commands to verify the SPI bus should return output like: $ ls …

[root@lalaki ~]# journalctl -p4 Sep 16 14:27:11 lalaki kernel: watchdog: watchdog0: watchdog did not stop! Sep 16 14:26:51 lalaki kernel: cacheinfo: Unable to detect cache hierarchy for CPU 0 Sep 16 14:26:51 lalaki kernel: cacheinfo: Unable to detect cache hierarchy for CPU 1 Sep 16 14:26:51 lalaki kernel: cacheinfo: Unable to detect cache hierarchy for CPU 2 Sep 16 14:26:51 lalaki kernel: cacheinfo: Unable to detect cache hierarchy for CPU 3 Sep 16 14:26:51 lalaki kernel: KASLR disabled due to lack of seed Sep 16 14:26:51 lalaki kernel: cacheinfo: Unable to detect cache hierarchy for CPU 0 Sep 16 14:26:51 lalaki kernel: axp20x-regulator axp20x-regulator: DCDC frequency o…

Hi, I'm using an Orange PI ZERO HC2 + and usb (mt7601u) wifi dongle to create a hotspot. The configuration is as follow <HOTSPOT>WLAN0 [ Orange PI ZERO HC2+] WLAN1 <connected to my box> At startup when hostapd is launched to create the hotspot i get the following output . See below <HOSTAPD ERROR>. My hostapd.conf is below. Wlan0 use for xradio_wlan as physical driver Wlan1 use for mt7601 as physical drive I did some testing. I have the exact same config with a pi3. And have no problem. I tested the hostapd provided with the orange pi on the pi3, it works …

Hi, I have quiet a problem getting ipsec/strongswan running on my Orange Pi R1. IPSec is configured fine and it connects to my vpn gatway by establishing and ikev2 connection with the help of transform (xfrm) interfaces. After connection everything works fine, but not for long. When I transfer large amounts of data (e.g. iperf3) the whole Orange Pi R1 freezes suddenly. This occours almost immideatly, sometimes i get a couple of seconds a data stream, but mostly it freezes at once. Currently I use even the lates "Linux orangepi-r1 5.9.1-sunxi #20.08.14 SMP Tue Oct 20 23:01:54 CEST 2020 armv7l GNU/Linux" Kernel, and I upgrade…

I'm running Armbian Bionic on OPizero. I have a problem using arecord on the mic input. Audio codecs have been enabled but when I run following command to record I get a pcm read error arecord -D plughw:0,0 -d5 -f cd test.wav Recording WAVE 'test.wav' : Signed 16 bit Little Endian, Rate 44100 Hz, Stereo arecord: pcm_read:2103: read error: Input/output error There is no recording and file is just 44 bytes. pi@orangepizero:~$ ls -l test.wav -rw-r--r-- 1 pi pi 44 Jan 6 20:44 test.wav The output from this command never finishes after 3 seconds and I have to use ctrl+c to breakout: arecord -vvvv -d 3 /dev/nul…

How often do nightly builds get added. I had a kernel support committed for meshpoint to the Orange Pi H5 repo but there is still no new download and its been over a month.

Hello all guys, I tested my orange pi one and it is free from the overvoltage "defect" related to the CPU voltage regulator. The multimeter reports the expected 1.1 and 1.3 voltages. I decided to do some tests to find the highest frequency it can run stable at its lowest voltage of 1.1 volts. I found something odd. This is the dvfs table I'm using now: [dvfs_table] pmuic_type = 1 pmu_gpio0 = port:PL06<1><1><2><1> pmu_level0 = 1100 pmu_level1 = 1100 extremity_freq = 1200000000 max_freq = 1200000000 min_freq = 648000000 LV_count = 2 LV1_freq = 1200000000 LV1_volt = 1100 LV2_freq = 648000000 LV2_volt = 1100 If you're skilled with script.fe…

I've had an Orange Pi Zero Plus 2 H5 for a few months, and it is driving me crazy. I can easily boot into the useless Android distro included on the eMMC. I can run most of the distros on the OrangePi website, although they seem to all be missing features or not working 100% in one way or another. I would LOVE to run Armbian on this board. Each time I try, I have huge problems. My video signal is often garbled or at best full of artifacts. I get segfaults every few minutes, and it seems like the filesystem is corrupted. I've tried running it with multiple power supplies (I have several Canakit 2.5amp ones), as well as several different gen…

HI, i get the failure "***warning - bad CRC, using default environment" and the system don't boot. I tested it with an banana pi, cubieboard2 and olimex A20 Olinux Lime2 and all the same failure. Of course with the specific image. I flashed the image with ubuntu 14.04 lts (no virtual maschine) with dd bs=1M if=filename.raw of=/dev/sdb. I using the direkt letter of the drive sdb and not the specific partition sdb1. The windows flash tool dont works, i get an error when click on "copy", whats that, missing framework? What i make wrong?

Hi, first of all thanks a lot for every contributor, this is a great project, I'm an absolute fan! I'm running Armbian on an orange pi 2, everything works fine for a while. I'm running a homegrown python script with flask, this one works too. But after ~1-x hours, I can't connect anymore to my web service. This could be my problem, but in fact, neither SSH works. So I found these things, my script tells me this: ---------------------------------------- Exception happened during processing of request from ('192.168.0.158', 59734) Traceback (most recent call last): File "/usr/lib/python2.7/SocketServer.py", line 290, in …

Before I buy an AV cable for my orange pi zero I'd like to know how kodi performs on this board. I have this board and I'm thinking of running kodi if it's good enough to run it. If you've run kodi on the orange pi zero please let me know your thoughts about it.

I want to record sound using Orange Pi Zero. I connected MIC1PIN in single header in Orange Pi Zero and GND to my mic(I'm using simple mic which is used for arduino). Aplay works fine, but when I tried to execute arecord it gives an error. root@orangepizero:~# arecord -Dhw:0 -f cd test2.wav Recording WAVE 'test2.wav' : Signed 16 bit Little Endian, Rate 44100 Hz, Stereo arecord: pcm_read:2103: read error: Input/output error When I execute arcord -l I got this, root@orangepizero:~# arecord -l **** List of CAPTURE Hardware Devices **** card 0: Codec [H3 Audio Codec], device 0: CDC PCM Codec-0 [] Subdevices: 1/1 Subdevice #0: subdevice #0 My …

Hi all, I'm trying to access the GPIO from python context and I absolutely need to do it in a rootless way. (WSGI apache module) I'm a newbie and noticed that this is the library command causing the error inside the python library: Code: Select all fd = open("/dev/mem", O_RDWR); I do have /dev/mem on my armbian distro and clearly the access to /dev/mem is root limited, what's worst I don't have /dev/gpiomem Is there a way to create /dev/gpiomem so I can add the apache user to gpio group and solve this? Do I need to configure and compile a kernel by myself? please help me, thank you

Today i compiled for my Orange Pi One the kernel 4.11.12-sun8i from the sources. The kernel works with only 1 (one) core. / _ \ _ __ __ _ _ __ __ _ ___ | _ \(_) / _ \ _ __ ___ | | | | '__/ _` | '_ \ / _` |/ _ \ | |_) | | | | | | '_ \ / _ \ | |_| | | | (_| | | | | (_| | __/ | __/| | | |_| | | | | __/ \___/|_| \__,_|_| |_|\__, |\___| |_| |_| \___/|_| |_|\___| |___/ Welcome to ARMBIAN 5.31 stable Debian GNU/Linux 8 (jessie) 4.11.12-sun8i System load: 1.11 0.26 0.09 Up time: 0 min Memory usage: 10 % of 464MB IP: 192.168.3.156 CPU temp: 43°C Usage of /…

Hi. I'm trying to boot my Cubietruck with Armbian_20.05.1_Cubietruck_focal_current_5.4.43_desktop image, but it can not complete boot process. It is able to connect to wired network, I'm able to ping it, but SSH never becomes up and desktop environment is not started. Previous 20.02buster and bionic images worked fine. Is it some known issue?

if use: mpv --vo=vdpau --hwdec=vdpau --hwdec-codecs=all --fs --loop=yes /media/usb/*.mp4 hardware decoding work if use mplayer mplayer -stop-xscreensaver -ontop -quiet -fs -vo vdpau -vc ffmpeg12vdpau,ffh264vdpau, -loop 0 /media/usb/*.mp4 hardware decoding not work Howto use mplayer with hardware decoding videoplaying on Orange PI PC v1.2?

Hi whoever can help. Just bought the Topic device. Very disappointed because of very poor docs and support. I cannot boot Armbian. There are must be something undocumented. I just burnt image desktop Armbian with dd if=image of=/dev/sdc to SD but it is ext4 on /dev/sdc1 and fsck reports good. Well I made it is bootable by setting boot flag in partition but the device is not going to boot. None of leds is lighting. The device is booting well without any SD from it's internal flash into Android. (How to put there Armbian by the way?) It is also booting into Android from SD which I burnt under Windows(!!!!) with a "special" buggy tool Phoenix (Crazy!!!) …

Hello. I'm having trouble with infrared receiver. Whether the sunxi_cir driver installed in kernel or not, there is nothing in /dev/input except "event0", which is the power controller. Dmesg doesn't show anything neither. Version: Armbian 4.5 Lamobo-r1 Debian jessie next (unofficial), kernel 4.2.3. IR support was declared on download web page, so I decided to get vanilla kernel. That's because I had already tried Bananian with 3.18 kernel, and there were huge problems with kernel ppp (up to freezes of whole device). Has anybody encountered this problem?

Hello Everyone, I have an Orange Pi 3 and I want to wipe the default OS and replace it with Armbian. It has some foreign default OS which appears to be Android based and without a word of English. The Armbian documentation wasn't much help because it didn't provide any instructions for this sort of hardware. If any of you could give me some pointers that would be very much appreciated.

Hi - I have been using Armbian buster stable on Orange Pi Zero for the past 12 months, starting with 5.92 last August and going up to 20.05.7 today. In all of these versions, clock speeds above 1.008GHz are unavailable, despite the board supporting 1.104GHz, 1.2GHz, 1.296GHz and 1.368GHz. They are not listed in armbian-config, cpufreq-set is unable to set them, and dmesg includes lines like: [ 10.030991] core: _opp_supported_by_regulators: OPP minuV: 1320000 maxuV: 1320000, not supported by regulator [ 10.031017] cpu cpu0: _opp_add: OPP not supported by regulators (1104000000) [ 10.031305] core: _opp_supported_by_regulators: OPP minuV: 1320000 maxuV:…

I hear that Orange Pi 2E has 1GB network speed and an USB3 port. In my project I paln to use an SBC as a network bridge and sniff traffic for problems. A simple network tap would otherwise be ok but they come only with 10/100Mbd speed limit. What I'd do have two ethernet ports on the Orange Pi, one regular and one via USB3. No to my question: are Orange Pi capable for this or is the advertised network/USB3 speed buggy/lacking? I have one Orange Pi PC for a file server and it has been running for weeks just fine. Raspberry Pi's are fine to (albeit still no 1GB ethernet). Raspberry Zero's have issues (mine seem to lock up after a couple of days).

Pinecube fails to boot with Armbian_23.5.0-trunk.140_Pinecube_bookworm_edge_6.2.13.img . In the boot log is this line: So I tried to modify `fdt_addr_r` env variable and were able to succesfully boot with theese commands executed in u-boot console: So adding following line to /boot/armbianEnv.txt on sdcard can fix booting permanently: Complete boot log:

Hey everyone, I am attempting to update my Orange Pi Zero from Armbian 22.0.2.1 to the latest 23.11 version however I am running into the issue that I am stuck on how to perform this update, I have tried it using the sudo apt dist-upgrade command and tried regular sudo apt update and upgrade commands but everytime it says there are no new updates available (also no errors), when there is clearly a new version 23.11 available here: https://www.armbian.com/orange-pi-zero/ What am I doing wrong? Is it maybe because it says unsupported userspace?

Hi every body, I have a Orangepi Plus 2E as you know with 16GB eMMC. Have installed armbian via SDCard before and executed nand-sata-install to copy it to eMMC. But currently need to get an image to install on another one. So there must be an opposite action like install_to_sdcard (in raspbian) but I couldn't find it.

Hi all, I want to set my Pi with specified hostname. I checked successful when cat /etc/hostname. Howerver, when I am using a Advanced IP Scanner to scan all the network, it just show the IP without the hostname while others raspberry boards have displayed as my attached image below. Thanks!

Hello, In the following environments of Cubietruck, a problem which the CPU core is not recognized only one has occurred. $ hostnamectl Static hostname: dns02.kometch.local Icon name: computer Chassis: n/a Machine ID: 609e2bf4c5884368b36018d67982759e Boot ID: 4faccf729c4042fc87013cb82494b486 Operating System: Debian GNU/Linux 8 (jessie) Kernel: Linux 4.1.6-sunxi Architecture: arm $ cat /proc/cpuinfo processor : 0 model name : ARMv7 Processor rev 4 (v7l) BogoMIPS : 16.42 Features : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm CPU implementer…

Hi there, my favourite Video player is VLC (who remembers? ;p), so I downloaded it, apt-get install vlc But on MP4 video image is 8x squashed, speed looks OK, sound is "almost working" with muting from time to time. With mvp screen looks (geometrically) ok, but pixels are 8x8 (colour). Unusable too. Any ideas? Sample film visualises on mCeleron 1.4GHz / Intel GMA w/o problem. (I know, from HDD, but it looks not like a HDD performance problem).

There appears to be a problem or incompatibility with the new 2018.05 u-boot configuration and/or implementation and the Armbian sunxi-next startup scripts (both in the current master branch). The "fdt" command processing doesn't appear to properly expand local environment variables before trying to execute them (?). Here's an example from a vanilla Armbian boot (u-boot 2018.05) - notice the "libfdt fdt_path_offset() returned FDT_ERR_NOTFOUND" errors when the DT fixup script runs: ... Err: serial Net: No ethernet found. 230454 bytes read in 15 ms (14.7 MiB/s) starting USB... No controllers found Autoboot in 1 seconds, press <Space> to…

I have tried several times to install the SD card root partition to a USB I have plugged in It fails to boot after it says it has completed I run it headless

Hi, I am having doubts on how to use I2C ADS1115 unit on Orange Pi Lite. I already have I2C module and tools installed (see below). Thing is, where do I get the Phyton library to make use of it? Are there any examples? The other question is about wiring. When I connect to twi0 I cannot see the I2C device: root@orangepilite:~# i2cdetect -y twi0 0 1 2 3 4 5 6 7 8 9 a b c d e f 00: -- -- -- -- -- -- -- -- -- -- -- -- -- 10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 30: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 40: -- -- --…

My Orange Pi 3 LTS with Armbian 23.11.1 Jammy with Linux 6.1.63-current-sunxi64 is showing high load, but low CPU. The SBC crashed overnight. When I run htop, the following lines show state D: root lscpu root /bin/bash /usr/lib/armbian/armbian-hardware-optimization start root grep -q \<ondemand\> /sys/devices/cpu/cpu0/cpufreq/scaling_available_governors load average: 4.00, 4.00, 4.00 System load: 100% CPU usage: less than 1% sar -u 5 Linux 6.1.63-current-sunxi64 (hostname) 12/31/2023 _aarch64_ (4 CPU) 03:41:54 …

HowTo: Setting up resolution 1600x900 & 1366x768 ? &how can i set up other resolutions those are not in h3disp like 1600x900 board is orangepi-pc

Hi, I've been using Armbian for three years on some work's project and this is the first time I see this issue. Basically I have an image of the operative system and all the programs and scripts already saved in it, so when I have to prepare a new SD card I just use the command "dd" and then I modify some registry stuff specific for the object I'm creating. It has always worked without problem, but now we bought a new batch of SD cards and I'm facing this issue: the dd command goes succesfully and if I mount the partitions after it has finished I can see all my data, but when I boot the system sometimes I get some errors. Here is the last part of the…

Hello I installed today image version: Armbian_5.24.170129 (CLI version) Image starting fine but after some time i'm unable to login via ssh and hdmi showing something like this: Any ideas? Its on sandisk card class 10.. (brand new ) but kingston (used for 1,5 y)card also class 10 warking fine,

Hi, I am working on enabling crust support in Armbian. A draft version of pull request is here. I have made the changes for the same. With my changes, crust compiles as part of building the image and gets bundled in u-boot. I can also see the following message from U-boot U-Boot 2022.10-armbian (Jun 14 2023 - 13:49:59 +0000) Allwinner Technology CPU: Allwinner H3 (SUN8I 1680) Model: FriendlyARM NanoPi NEO DRAM: 512 MiB Core: 61 devices, 18 uclasses, devicetree: separate WDT: Not starting watchdog@1c20ca0 MMC: mmc@1c0f000: 0 Loading Environment from FAT... Unable to use mmc 0:1... In: serial Out: serial Err: serial Starting SCP... Net:…

Edit: --------------------------------------------------------------- OrangePi PC+ ARMBIAN Buster and Focal v20.05.x Problem: I can't get UBoot to rotate the screen. Solution: I still don't know. --------------------------------------------------------------- Hi. I am using a Tablet Display with a controller (link) as a monitor, the case is that the controller is vertical (1536x2048) and I want to use the monitor in landscape mode (more normal). The ARMbian system of my OrangePi PC + single terminal without desktop starts rotated (vertical). Once started from the command line I can write: echo 3 | sudo tee /sys/class/graphics/fbcon/rotate_all …