Beginners

I got 3 Neo2 - but only on 1 the setting for the language de_DE.UTF8 does work via armbian-config or dpkg-reconfigure locales The one where it works does show after login root@npi-neo2-22(192.168.6.22):~# locale LANG=de_DE.UTF-8 LANGUAGE=de_DE.UTF-8 LC_CTYPE="de_DE.UTF-8" LC_NUMERIC="de_DE.UTF-8" LC_TIME="de_DE.UTF-8" LC_COLLATE="de_DE.UTF-8" LC_MONETARY="de_DE.UTF-8" LC_MESSAGES=en_US.UTF-8 LC_PAPER="de_DE.UTF-8" LC_NAME="de_DE.UTF-8" LC_ADDRESS="de_DE.UTF-8" LC_TELEPHONE="de_DE.UTF-8" LC_MEASUREMENT="de_DE.UTF-8" LC_IDENTIFICATION="de_DE.UTF-8" LC_ALL= root@npi-neo2-22(192.168.6.22):~# uname -a Linux npi-neo2-22 4.20.7-sunxi64 #5.75 SMP Fri Feb 8 1…

As a newbie here I'd first like to send greetings to all members and to send a big THANK YOU to the support team. My problem is: After booting cubietruck and installing the updates the USB devices aren't recognized anymore. I'm using standard devices: wired Logitech mouse, wired Cherry keyboard. Updating went smoothly and finished normally. Immediately after it, at the console prompt the keyboard was already dead. I rebooted repeatedly via HW switch because I couldn't log in and keyboard LEDs were also off. My questions: What could I try to fix this? Is any important info missing? Here is an extraction fro…

Hi, I've installed Armbian 23.02 Jammy Gnome from https://www.armbian.com/orangepi-5/ on my new Orange Pi 5. Unfortunately, it looks ugly compared to Ubuntu on my x86_64 PC. The main problem is the irregular use of occasional single-colour icons - for example the trash-can in the dock. Is it possible to make Armbian 23.02 Jammy Gnome not use these single-colour icons, and use Ubuntu icons throughout?

I installed it on a 3D printer and when the system starts, the Wi-Fi connected to the USB slot is not detected. Before that, the network manager installed it. After starting the machine and the OS it does not work, but when connected to a LAN it is detected as a USB device. If you take it out and put it back in after the operating system starts, everything starts working. What is the problem? How to automate?

I use Armbian Jammy Xfc3 23.11.1 on my Banana Pi m3. It's on a 32 GB SD-Card. I did a backup with usbimager Flashed the image to another SD card with 128 GB. Changed the rootdev=UUID in /boot/armbianEnv.txt and the UUID in /etc/fstab But it won't boot What am I missing?

Hello, I have a cubieboard (first one), and i used it with VGA output, by changing script.bin values. Now i installed armbian with vanilla kernel, and realized that i can't use script.bin anymore (since its using device tree blobs). Does anyone know what do i need to change in dtb file to get a working VGA out ? or is there some kernel parameter to override dtb values ? Thanks PS thanks for the great work Igor!

Hello All, What do I have to do in order to get Armbian on the Marsboard A20 SOM Thanks,

Hello, I own OrangePI board and want to repurpose it as mediacenter and computer conected to TV however multimediacenter distributions as OSMC, OpenELEC dont support OrangePi, so i decided to use ubuntu desktop enviroment from ARMBIAN according to download page it should support some level of HW acceleration for video playback So my question is - would I be able to install KODI (formerly XBMC) and use it on ubutnu desktop enviroment with working video acceleration within KODI (similar to RaspberryPi and OSMC or OpenELEC) ?? Or is there any other way to use KODI on OrangePi ? Maybe on android designed for OrangePi ? Tkanks for answers

hi All, I'm new on this forum, very great work all OMV project! I have a banana router, also called LamoboR1, an ARM powered very powerfull router, I can install Wheezy or Jessy (I think Jessie would be better) an other this install OMV on wheezy I havent 'got any problem I instal OMV Stoneburner and after I upgrade via omv-release-upgrade to Erasmus ( little question does Ownlcoud run on Erasmus, can't find it in omv extras repo ? ). When I try to install OMV from Jessie I get this error The following packages have unmet dependencies: openmediavault : Depends: php5-pam but it is not going to be installed Depends: proftpd-mod-vroot but it is not going to …

I am just starting to play with my new orange pi I have it booted with this server image http://www.armbian.com/orange-pi-one/ Logged into network using Ethernet I have Wifi in USB slot but the machine does not recognize it so no ip on wlan0

Hello all, I started to receive unsolicited e-mails from my Nanopi NEO and couldn't figure it out what are triggering them. I checked my crontab and there is nothing there. Please if someone knows to clarify this, I would be very grateful, I'm relatively new to linux. My root crontab: 00 02 1 * * sh /home/pi/updategeoip.sh 0 6 * * * /sbin/shutdown -r now */5 * * * * python /home/pi/tempalert.py 2>&1 My user crontab: 0,15,30,45 * * * * sh /home/pi/sendip.sh &>/dev/null The e-mail is sent everyday at 06:25 +0000 and seems to be activated by this command: test -x /usr/sbin/anacron || ( cd / &&amp…

Hello, I'm looking to replace my x86 micro tower with a SBC, to mainly use it as a NAS and media player. On the hardware side, I would like to have a native SATA port (for the NAS hard disk), HDMI output and H.265 decoding (media player), at least 4GB of RAM (to be somewhat future-proof). Bluetooth is a plus to play some retro games Not sure about the OS storage: SD card, eMMC, an hard disk on another SATA port? At the moment I found two boards: the Radxa Rock 3A (with its DIY SATA over USB cable) and Odroid HC4. Both are supported by Armbian, but maybe there is a more recent board that I didn't find? Thanks.

when reboot or shutdown the desktop will redisplay, why？who can help me? thanks a lot.

Hi , We are working on sochip s3. We are trying to interface a new sensor( CSI - MIPI ) with S3 chip with interface add a new file for a new sensor. Required changes : Change in .fex file, change twi_id and twi_add. Also, change module name and address at module load time. $ insmod /lib/modules/3.4.39/vfe_v4l2.ko ccm="ov8856" i2c_addr=0x6c But we got below an error : [ 19.888515] [VFE CCI_0 ERR] Status error at addr_8bit = 6c, wr_flag = 1, val = 1000a30 [ 19.888764] [VFE CCI_0 ERR] Status error at addr_8bit = 6c, wr_flag = 1, val = 1000a30 [ 19.889007] [VFE CCI_0 ERR] Status error at addr_8bit = 6c, wr_flag = 1, val = 1…

I am using a 32-bit orangepi plus 2E with debian. I get the following message: TOR BROWSER REQUIRES A CPU WITH SSE2 SUPPORT.

I want start global log on a database in mysql with query: SET global general_log = 1; Then i get error ERROR 3 (HY000): Error writing file '/var/log/mysql/mysql.log' (Errcode: 28) df-al shows me: Filesystem 1K-blocks Used Available Use% Mounted on sysfs 0 0 0 - /sys proc 0 0 0 - /proc udev 10240 0 10240 0% /dev devpts 0 0 0 - /dev/pts tmpfs 205032 26604 178428 13% /run /dev/mmcblk0p1 29267548 1546492 27394084 6% / tmpfs …

hey all! i want to create my own armbian image to burn to many devices it seems it would be smart to re-enable the firstrun to run the next time the os boots up (i.e. inside another Orange Pi) is the correct way to do this: systemctl enable firstrun ? Id like to: expand the partition set a random mac address create any keys p.s. sorry for multiple error posts.

g_ethernet worked great for a long time, then i updated the software on my destop and it is broken. it almost works but the host drops all the packets for some reason. am i the only one that is having this problem?

Hello, I tried to install Gladys on Orange Pi and has succeeded. Now i want to start the OPi on fullscreen with Gladys (http://localhost:8080) on Chrome How to get it done in Armbian?

it does not exit the location screen. it doesn't go into anything. can anybody help me.

Hi guys. I'm trying to install Lighttpd, MySQL and a few other things, but it won't work. I'm following the instructions found here: https://www.howtoforge.com/tutorial/install-lighttpd-with-php-fpm-and-mysql-on-debian/ Does anyone have experience in this? For example; running the command apt-get install mysql-server mysql-client gives me the following output: Reading package lists... Done Building dependency tree Reading state information... Done mysql-client is already the newest version. mysql-server is already the newest version. You might want to run 'apt-get -f install' to correct these: The following packages have unmet dependencies: my…

Hi, i recently upgraded my armbian from Kernel 4.9.something to 4.10.12. After the upgrade cryptdisks wont decrypt my partitions and in the syslog Any ideas? there seem to be no modules missing and the crypto functions are there

Hi, in my case the test is on a Rock64 (4GB, v2 edition) using latest current Buster or Focal. The problem is in the first init configuration assistant. When selecting the "User language based on your location", after selecting es_AR.UTF-8 (I am from Argentina) it "auto-detects" my keyboard layout as AR which belongs to Arabic iirc (which is wrong). After this of course I can't type anything right on terminal. I had to fix it over ssh by issuing the command: sudo dpkg-reconfigure keyboard-configuration.

I would kindly like to ask you to enable the intermediate functional block, ifb, as a module in the default kernel config for the BPI-R1 CONFIG_IFB=m It should not hurt anyone as it is just a module. The ifb network device is quite useful when doing experiments with tc (trafficx control), and it is absolutely necessary when you want to affect incoming traffic (normal tc netem works only on outgoing packets) Thank you.

I can enable bananpi M2 ultra sound (headphone and mic on pcb) You must add this on the dtsi file. dma: dma-controller@01c02000 { compatible = "allwinner,sun8i-h3-dma"; reg = <0x01c02000 0x1000>; interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ccu CLK_BUS_DMA>; resets = <&ccu RST_BUS_DMA>; #dma-cells = <1>; }; codec: codec@01c22c00 { #sound-dai-cells = <0>; compatible = "allwinner,sun8i-h3-codec"; reg = <0x01c22c00 0x300>; interrupt…

Hi everybody, I have OrangePi PC Plus board, which has EMMC. I downloaded image from armbian website, as I want to instll armbian image to EMMC via USB with PhoenixSuit instead of instll_to_emmc command, but it failed. PhoenixSuit reported that it couldn't recognize the firmware. Is there any tools to insall Linux-like firmware to EMMC ? Thank you very much.

Hi, Need to interface a multichannel codec to an OPiPC, having 8 channels out and 6 channels in. So trying to find any example of an overlay for H3 with TDM usage on simple-audio-card giving more than 2 channels in/out. Seen that the latest i2s driver for H3 (sun2i-i2s.c) does support TDM (DSP_A/DSP_B) but did not found any relevant overlay for H3 so far. Any help is appreciated. Christos

Hi, I want to use a mcp2515 can controller over spi1 or 2. I read about internal flash is blocking the spi1. Can I use another Chipselect pin to use the spi1 with GPIO? Can you please give some advice where to start my research about overlays? What else do I need to activate? (core moduls, driver…)

Hi all, As I will buy a sunvell r69 board, which is H2 + EMMC, so I want to build armbian firmware for it. But I can not find the building config for H2 with EMMC, so how can I change the building config ? Thanks.

Hi all. I'm trying to figure out how to use gstreamer to encode h264 video on Rock64 (Rockchip RK3328). I'm using Armbian Bionic 5.60 (stable Ubuntu 18.04.1 LTS 4.4.156-rockchip64). I compiled mpp and gstreamer-rockchip from https://github.com/rockchip-linux and installed both, but I'm still missing mpph264enc, how do I get that? gst-inspect-1.0 mpph264enc says: No such element or plugin 'mpph264enc' Many thanks for reading, any help would be greatly appreciated. Regards. Christian

Hello, everybody. I am using Orange Pi Zero 2 Plus and I need to make autologin in my user. How do I do this? Thanks

I keep finding the wtmp file missing, anyone else? Just trying to eliminate a configuration error case. odroid n2 odroid xu4 using latest kernel.

He forum members, I try to install telegraf on my R2 running armbian bullseye: # PLEASE DO NOT EDIT THIS FILE BOARD=bananapir2 BOARD_NAME="Banana Pi R2" BOARDFAMILY=mt7623 BUILD_REPOSITORY_URL=git@github.com:armbian/build BUILD_REPOSITORY_COMMIT=aec64805a DISTRIBUTION_CODENAME=bullseye DISTRIBUTION_STATUS=supported VERSION=21.08.1 LINUXFAMILY=mt7623 ARCH=arm IMAGE_TYPE=stable BOARD_TYPE=csc INITRD_ARCH=arm KERNEL_IMAGE_TYPE=Image BRANCH=legacy I can install influxdb via apt install influxdb without problems, but can't install telegraf that is part of influxdb (E: Unable to locate package telegraf) So I …

Hi i would like to use the eDP Display on my nanopit4. How can i compile the Kernel to support the edp?

Hello, I have a problem with a Nanopi Neo3: on 22/03/2022, after upgrading to 22.02, the board does not start anymore. Unfortunately, I cannot debug it via serial. I have a CP2102 adapter (known to work), but I only get garbled characters. Maybe I am doing something wrong with the serial connection, but I cannot figure it out. Any suggestion? Thanks

Hello, For a custom board using the H5 or H3 SoC, i would like to make the Calibration of the DDR3 chip. I think that the available information is very little. I will report here the steps I am taking. Anyway, I would greatly appreciate any information that could be provided to me. Thanks in advance

Hello , I have Banana pi zero, and I would like to install Armbian but a headless installation ! Is there any image from where I can put my wifi password then boot up the device ? Thanks

Hi, I need to use the MPV option --record-file and notice that the repository 0.14 version doesn't have this. What's the best way to update to the latest version of MPV? I'm using MPV on legacy Armbian (Xenial) due to it's stable multimedia features on my H3 device. Thanks

I installed remot3.it.deb through terminal, when in run the connectd installer, it asks me to log in, when i log in, it says: API call to https://device.remot3.it/api/project/create failed! If i run this on a Pi running Raspbian, it works fine. Any idea? It seems to be an Armbian issue as it works on other Ubuntu images. Thanks, Matthew

Hello, I need to use the UART interface ttyS0 to connect other hardware, so I would like to disable its debug function, removing the console output that is directed to it. I've tried this: I commented the following line in /boot/boot.cmd: #setenv console "both" And compiled: mkimage -C none -A arm -T script -d /boot/boot.cmd /boot/boot.scr I was not successful, could someone instruct me on how to do what I want?

Hello. I'm using the latest image from https://www.armbian.com/rock64/ installed today. As description say, it is possible to overclock the board to 1.5ghz, but it didn't work. root@rock64:~# cat /sys/devices/system/cpu/cpu{0,1,2,3}/cpufreq/scaling_available_frequencies 408000 600000 816000 1008000 1200000 1296000 408000 600000 816000 1008000 1200000 1296000 408000 600000 816000 1008000 1200000 1296000 408000 600000 816000 1008000 1200000 1296000

Hello! How can I schedule power off the board? After power on, I want to turn off the device automatically 7 hours later. At the moment, time switches turn off the boards power supply in every day... dead 3 SD cards...

Hi, First time poster, so immediately confused with the tags. tag was required but could not find one for Radxa Rock 4se. I want to get the raspberry pi camera working in ubuntu on my rock 4se. I tested with the image radxa provides and the hardware works. Then i switched to the community ubuntu image and it seems i need an overlay to tell the linux device tree that the rpi camera is there. Can anybody help me with this? Thanks!

Hey all! I'm wondering if there's a tried and tested method for preparing an armbian system to be made into an SD card image, including: * Clearing the right SSH data * Triggering firstrun to run next time * Shrinking partition * Any other suggestiosn NB : the filesystem for armbian seems to be quite different from raspbian / other. Which makes shrinking the partition from another computer quite confusing (e.g. when mounting a ripped img in ubuntu we just see one full partition across the entire SD card, even if there's lots of free space)

Điện thoại BlackBerry rẻ nhất Chi tiêu hợp lí và tiết kiệm đã trở thành điều mà nhiều người mong muốn nhưng không làm được. Với bảng giá điện thoại BlackBerry và nhiều sản phẩm khác như Nokia, Samsung hay iPhone, bạn hoàn toàn có thể an tâm rằng mình sẽ không bao giờ "bị hớ". Đặc biệt, bạn có thể tìm kiếm cho mình một chiếc điện thoại Blackberry có mức giá rẻ nhất và hoàn toàn yên tâm về chất lượng thật tại MOBIGO. Xem thêm: https://www.vingle.net/posts/2438090 1. Điện thoại Blackberry Bold 9000 Bold 9000 có thể xem là một sự thay đổi mới của RIM khi trào lưu iPhone lên mạnh, giúp smartphone BlackBerry giữ một lượng fan tốt trước khi thoái trào. Có thi…

I am trying to user IR with lirc on rock64 with default module gpio-rc-recv but is getting error in dmesg. [ 5.852837] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/ir-receiver[0]' [ 5.852856] gpio-rc-recv ir-receiver: Failed to get gpio flags (-2) [ 5.852879] gpio-rc-recv: probe of ir-receiver failed with error -2 Is it error with module or configuration with lirc? Please help

https://libre.computer/ They appear to be comparable to orange pi computers. They do provide up to 2gb ram and support emmc. Do you have comments about the computers or testet one of them? Thank you.

board : Banana pi M2 zero OS : Armbian_23.02.0-trunk_Bananapim2zero_sid_edge_6.1.11_xfce_desktop.img.xz The same error exist for newest Debian releases. Only Users that never opened an X11 session locally can connect using RDP (xrdp)

Oi, eu sou muito novo para o assunto, mas eu tenho um problema com um pi laranja e eu instalei vários (IMG) e comecei, mas ele caiu e lá no final era como "iniciar o kernel" e ficou congelado então eu instalei outras versões a mesma coisa aconteceu tipo uma interferência de tv e desligada alguém pode me ajudar a instalar o armbian corretamente?

I'm using Banana Pi M2 Zero with Armbian Debian GNU/Linux 10 (Buster). Compiled the image myself with the latest source code using the armbin/build repository. I want to be able to do serial communication on pins 8 and 10. I'm looking for something to appear at /dev/ttyAMA0, so I can communicate with it. I saw some other forum posts which mentioned it'll happen on /dev/ttyS0 , however even that is not happening. The serial communication is working via FTDI (using the USB side connected to the Banana Pi), which indicates there is no problem with the other device. This is what the configuration looks like using "sudo minicom -s". +…

Did someone else notice the the color saturation is to high on HDMI if a Video is played? Test video watch temperature of CPU and add a heatsink! May be the is an option for HDMI to change this? Especially Faces in normal TV shows are far to red. DISPLAY=:0 mpv --vo=vdpau --hwdec=vdpau --hwdec-codecs=all --fs http://ow.ly/10tB0C Olso interesting would be to know how smooth the VIDEO rans is far to slow in ma case.

Hi, I'm looking for something similar to wkhtmltopdf for ARM but I do not find anything, install wkhtmltopdf but I get an error when I run it (ERROR CODE) I installed xvfb and when I run it sometimes it does it gets stuck and then he turn off the orangepi if you know why happens this i will be pending to the comments or if someone has something similar to wkhtmltopdf for arm I would appreciate it to tell me. ERROR CODE QXcbConnection: Could not connect to display Aborted

I've noted that 'armbianmonitor -u' will obfuscate some detail such as IPv4 addresses prior to uploading, but it misses similar additional detail: IPv6 addresses, specifically 'global' scope, are left intact. These are on interface configurations and in resolv.conf configurations at least. 'domain' and 'search' directives in resolv.conf are left intact. These can (would) include local domain names, which may be sensitive outside of a given environment. username is exposed in showing group membership. This may be minor but in some cases may be sensitive outside of a given environment, and perhaps can be shown anonymously such as '### Group membership o…

I want to attach I2C LCD

Hello, I have several ARM boards in my possession and I want to be able to boot them all from a single SD card (I have commercial SW which requires activation and is tied to a particular SD card afterwards). So far, I have made this script which creates multiple /boot-boardname directories, replaces /boot with a symlink to one of those, and makes sure the right u-boot is written to the card. However, I have one little problem I couldn't yet solve: I would like to generate the correct /etc/modules file for a new board, and I don't know how. For example, Orange Pi Zero needs this xradio_wlan module for WIFI. Where do I find the info that this module is needed? A…

I have a question. Because there is a big mess in the naming of the first Orangepi series. I have a board with orangepi mini 2 image working. Archived Armbian 5.05 kernel 3.4.119. Orangepi pi 2 images do not launch. In appearance and specifications, the Orangepi PC 2 and mini 2 are almost identical. https://linux-sunxi.org/Xunlong_Orange_Pi_Mini_2. However, the specification for the mini 2 exists, although the manufacturer himself does not provide it on its main website. Could you add an introduction to the orange pi mini 2 board, with the old 3.4 kernel, so that you can build a system? Or maybe someone has some archival image to share?

I'm trying to get the armbian x86-64 generic image to run in virtualbox. I can successfully convert the *.img file to qcow2 and qemu will run it just fine. However, virtualbox fails to boot it in any format (qcow2, vmdk, vhd, vdi, etc). The grub menu comes up, but when trying to boot Linux then it just sits at a blinking cursor. I've tried converting this a variety of ways, such as using `qemu-img convert`, `vboxmanage convertfromraw` and `vboxmanage convertdd`. None of them yield an image that virtualbox will boot. Has anybody else had success with this, and/or know how to fix it? Thanks.

Hello, is it possible to use GPIO Pins with this OS? I would like to use this code: http://mujweb.cz/tlc/RasPi-SMT/ Board: OrangePI PC I decided to use this OS as the original images doesnt seem to support an USB WLAN adapter with atheros chipset I am using. This OS seems to work well with it.

...as title. I've installed ispConfig using Armbian-Config, but now I want to remove it. How to do it? Googling I've see that there is a unistall.php or /root/ispconfig/uninstall script that do that, but there is no trace in armbian.

Ok so I’m using a orange pi 3lts and when I try connecting to a Wi-Fi network it fails so to find the problem I ran armbianmonitor -u and it said network/firewall problem detected not able to upload debug info and I tried to use armbian config to fix this but it didn’t work how do if fix this?

I've got an original Tinker Board rev 1.2 that I want to install Klipper on for a 3d printer. I've tried installing both Armbian 24.11.1 Bookworm Minimal / IOT and Armbian 24.11.1 Noble XFCE and with either one when I try to shut it down with "sudo shutdown now" or using the shutdown option in the desktop mode, the board seems to shut down, the lights go out but it still draws around 700mA and the CPU stays warm or even gets a little hotter (with the board powered on but doing nothing it draws around 460mA). I've tried disabling wake-on-lan but that didn't help. I've tried adding power_off to the extraargs line in /boot/armbianEnv.txt also didn't help. It d…

i have the Cubietruck and i want to burn to the nand the Vanilla jessie i did it before with lubuntu with phoenix suite and it was really easy i just dont understand how to do this with the raw file can someone please help ?

Hello to all. I'm trying to use the image Armbian_5.25_Orangepipcplus_Ubuntu_xenial_dev_4.9.4.img but I can not operate the webcam. With the image of the previous version, the webcam worked with gs2035 and vte_v42l modules, which can not find in the current image. Is it an omission or there are compatibility issues? Where could I find instructions (simple, if possible) to compile them? Thank you.

?

Hi. I added a second wireless interface to my Rock64 and created a wifi hotspot using armbian-config. Now .local domains are not resolved anymore. I tried changing in files /etc/resolvconf/resolv.conf.d/base and /etc/resolvconf/resolv.conf.d/head IP from 8.8.8.8 to 127.0.0.1 but nothing changed. avahi-resolve-host-name is ok: christian@rock64:~$ avahi-resolve-host-name orangepi2mini.local orangepi2mini.local 192.168.0.12 but christian@rock64:~$ ping orangepi2mini.local ping: orangepi2mini.local: Name or service not known Could anyone point me on what could have gone wrong? Many thanks. Christian

root@orangepizero:~# apt update Get:1 http://security.debian.org stretch/updates InRelease [94.3 kB] Get:2 http://security.debian.org stretch/updates/main armhf Packages [470 kB] Get:3 http://security.debian.org stretch/updates/contrib armhf Packages [1,764 B ] Get:4 https://apt.armbian.com stretch InRelease [19.0 kB] Get:7 https://apt.armbian.com stretch/main armhf Packages [334 kB] Get:9 https://apt.armbian.com stretch/stretch-utils armhf Packages [6,376 B] Get:10 https://apt.armbian.com stretch/stretch-desktop armhf Packages [2,211 B] Ign:5 http://cdn-fastly.deb.debian.org/debian str…

Hi. I bought some time ago a OPi One and a OPi PC. Yesterday i tried to setup them with armbian without success until I switched images from one to another and...it worked. I think that the download page for each should be fixed ( 5.4.20 image ). Made me crazy as a beginner until I figured out, tried different micro sd cards, different power supplies... Sorry for my english. Many thanks for developers who makes something stable for this boards.

I have an OrangePi PC and a BananaPi M1, and both of them are able to switch to USB host mode or device mode by editing dr_mode in corresponding .dtb file. But seems that both board are not able to support HNP protocol. From my understanding, OrangePi PC and BananaPi M1 only has perpherial-only OTG, please correct me if I am wrong. Is there any board that can support HNP? I need something that can switch USB mode(from host mode to device mode or the other way around) without reboot the board Any advice is appreciated

Hi, I am looking for an OS for the BPi M2 Berry. Has anyone good experiences to share? Thanks a lot in advance, Friedrich I tried several OS, flashed with rufus.io No satisfying attempt yet. Last try is this: https://forum.banana-pi.org/t/bananapi-bpi-m2-berry-new-image-release-armbian-bullseye/14451

Hey the first time i tried armbian on tronsmart android box with sdcard , it was so seamless and so awesome. I am wondering if anyone has tried armbian on any android tablet. And it would be nice to support any of these tablets out there. In that way you don't have to worry about separate hdmi tv or monitor and accessories to use armbian. I always believe that arm's edge is in mobility, sleek and being minimal .

I have been trying to install a minimal XFCE4 desktop environment onto my Orange Pi Zero 2+ H5 but have run into a weird issue. Here is the command I use... sudo apt-get -y install xorg lightdm xfce4 tango-icon-theme gnome-icon-theme which I had found elsewhere in the forums. The main issue I have is that I cannot start the desktop with the normal user account. It works if I startup with this... sudo startxfce4 which runs the root user desktop, but fails when I try to run it as just a user. Does anybody know what I have done wrong?

Is anyone know how to set HDMI and LCD simultaneously on mainline kernel? We use a 3.5" LCD for which we made a patch (see enclosed). Now I'd like to have both HDMI and LCD showing the same framebuffer. Currently HDMI is only showing the console while signal is OK on LCD. Any hint would be appreciated. u-boot-sunxi-next.patch kernel-sunxi-next.patch

I try to update my jessie installation on orange pi one but I get errors. My kernel version is 3.4.113-sun8i My armbian.list file is this deb http://apt.armbian.com jessie main utils jessie-desktop My sources.list file is deb http://httpredir.debian.org/debian jessie main contrib non-free #deb-src http://httpredir.debian.org/debian jessie main contrib non-free deb http://httpredir.debian.org/debian jessie-updates main contrib non-free #deb-src http://httpredir.debian.org/debian jessie-updates main contrib non-free deb http://httpredir.debian.org/debian jessie-backports main contrib non-free #deb-src http://httpredir.debian.org/debian jessie-backport…

Hello All, It there a way to install Amiberry (Amiga Emulator)? I'm trying to set this up on my XU4 w/ Armibian Buster. Thanks

Hello all! Not sure if anyone saw this at all or not but the latest debian (11) now includes the panfrost and lima drivers! https://wiki.debian.org/PanfrostLima If I'm reading things correctly the needed bits and pieces (as well as a recent kernel) are in the packages "libglx-mesa0" and "libgl1-mesa-dri". Thought I would give this a go on a now (somewhat old-ish) Odroid XU4 device. It uses the mali t620 graphics chipset which I believe is in those panfrost drivers. I used the image file "Armbian_21.08.1_Odroidxu4_bullseye_current_5.4.142.img.xz". I did notice that the older kernel in that image (5.4.x) did not seem to detect anythi…

Hi, I need your help I´ve a Beelink with home assistant and unfortunately the storage is full and now i cant access to home assistant or samba share to delete the files and reboot the BOX I access successfully with putty (root privileges) to my Box, but i can´t see the files to delete. There is some way to do this? @ - Sorry for my poor english. Thanks M8´s. Luis Belo

I have a Ubuntu Server 18.04 with postfix installed and configure it the same way as I did on my Helios64 running Armbian 21.02.3 Focal. Last week, one of my older drives died in the Helios, but I didn't get an email about this. My Ubuntu Server 18.04 will send me mails as soon as there's an issue in the SMART values from the drive. I didn't had to configure anything to do that apart from postfix. I can send a test mail from both my Ubuntu Server 18.04 and my Helios64 Armbian and receive both. Any idea what the reason is that my Ubuntu Server 18.04 is sending me those emails by default and how I could enable this on my Helios64?

Looks like a missing gmp dependency? From armbian/build 5bfa587727f29a072b21ca936ab9f00ffdfbd502 == kernel == In file included from /root/armbian/cache/toolchain/gcc-arm-8.3-2019.03-x86_64-aarch64-linux-gnu/bin/../lib/gcc/aarch64-linux-gnu/8.3.0/plugin/include/gcc-plugin.h:28, from scripts/gcc-plugins/gcc-common.h:7, from scripts/gcc-plugins/randomize_layout_plugin.c:19: /root/armbian/cache/toolchain/gcc-arm-8.3-2019.03-x86_64-aarch64-linux-gnu/bin/../lib/gcc/aarch64-linux-gnu/8.3.0/plugin/include/system.h:687:10: fatal error: gmp.h: No such file or directory 687 | #include <gmp.h> | ^~~~~~~ …

Hey everybody, unfortunately no one could help me in OMV-forum due to a lack of armbian knowledge. Did all required preparations before running the upgrade script, nevertheless 6 services are broken afterwards, especially ifup/eth0. Apt update, apt upgrade and apt full-upgrade ran without problems before starting upgrade script. My system (set it up years ago with an amrbian-OMV3 image): # cat /etc/armbian-release # PLEASE DO NOT EDIT THIS FILE BOARD=raspberrypi BOARD_NAME="Raspberry Pi" VERSION=5.27 LINUXFAMILY=bcm2837 BRANCH=next ARCH=arm IMAGE_TYPE=experimental # lsb_release -a No LSB modules are av…

Good afternoon! Tell me about the case, please, the post is great, but maybe I'm initially going the wrong way. Initial task: data exchange between a remote server and equipment with a USB interface and CDC RS-232 or HID protocols. Putting a computer / laptop next to it is not an option. I did not find any ready-made solutions, there are only options: 1. Single board computer. Fast, cheap, angry, easy to make a case and PoE power from ready-made components on the market. 2. Arduino - to assemble from prototyping boards is long, difficult and expensive. To develop something of my own - the navel will be untied with my knowledge. 3. Hardware "e…

Hello, I am running an orange pi one plus (H6 all winner). I tried to change partition size as suggested, although nothing working, here is what I tried: fdisk and the commands, with and without deleting old partition then adding partitions, I get an error message at the end when input w, people say to ignore it, although orange pi cannot boot afterwords I tried the instructions on their wiki, nothing works I tried cfdisk which seems to be working, although still when I df -h I cannot see the partition, and when I try to install something for some unknown reason my dpkg gets broken, and says that my mmcblk0p2 is …

Hi, Armbian gurus. I have make a new kernel and related modules for my pineh64 and want to test it. Thus they are not from dpkg. To test this kernel and modules. I have few questions: 1. About the symbolic links in /boot, are they all mandatory? What if I don't have an initramfs? 2. The Image linked file, is it have to be limited to certain compressed format to work properly? 3. Is there a recommended work flow to test a external kernel? Or I can just test by replacing Image, dtb, and the modules? Thank you.

This Android device uses a Linux4.4 kernel. Considering that my nanopc-T3 lacks the functions required by a higher version of Linux, I would like to transplant the 4.14 version of Linux to this Android device at most without the bootloader source code. What's interesting about the device tree? It seems that the kernel provided by the device manufacturer includes some device drivers that are not included in the Linux kernel nativery. will cross-version compilation be a problem? https://github.com/LineageOS/android_kernel_motorola_msm8998

I was hoping to get some idea if it would be possible to build Armbian for the ODroid OGU (S922X, similar to N2+) using a different Kernel. Specifically, using the version from JelOS (https://github.com/JustEnoughLinuxOS/distribution) who have made really good progress for this specific device. I've been building JelOS and modifying packages etc, but would prefer to use Armbian if possible. Any help appreciated.

hi, I plan to turn my cubietruck IR gateway, and home theater controller. The first thing to do is to be able to decode any remote control can be used with lircmd. But when I use irrecord IRW returns do anything with some remote and works with the other. While in leaving the base configuration (infrared keyboard) there is always something to send. The sunxi ir-limited driver there are thee? The second point is to emit infrared to control my devices and there is little information that is partt LIRC_GPIO seems you abandoned. I watch the IR driver in the mainline kernel and I find that it is very different. I wonder if it would not be helpful to bnackport in lega…

Hi, I am new to armbian. I noticed that I cant see shell history after reboot. I thinks this is from zram. How can I configure to see shell history after reboot ?

Does anyone know this Board? Hardware Platform: Box_20130531 pre Installed Android Version: 4.2.2, A10-20, 3.3.0 ck@ck-desktop#2, Fri May 31 17:18:21 CST2013, RSH-A10-D-20130531 Product: sugar_ref001, Device: sugar-ref001, Board: wing, Brand: softwinners, Model: SoftwinerEvb, Hardware: sun7i Additional context The Hardware is this: Inakustik Internet TV Box Android Mini-PC (A7) 2 x 1.0 GHz 1 GB Android™ 4.2 Bestell-Nr.: 779273 - 62 Hst.-Teile-Nr.: 00415200 EAN: 4001985510139 Picture of Hardware: https://ibb.co/dpNMtsD https://www.conrad.de/de/p/inakustik-…

Hi I just installed Armbian Sid Budgie - rolling, and everything was fine. After the normal "apt update" "apt upgrade" and reboot all application icons in the main menu disappeared (only questionmarks left "?" ). How can i recover/restore them? Altering Budgie Desktop Settings "Icon" or "Built-in Theme" didnt help...

Hi There! I noticed the EOS for the OrangePi+ and that the OrangePi+ 2 is still supported. Since boards are almost identical, why leave the OrangePi+? And on top of that: when I download the current version, the downloads are the same for both boards.... Or am I missing something?

Hi All, just discovered this great project. Awesome to see it's so well frequented. I'm trying to do some realtime data acquisition on a OPi one with Armbian Debian Stretch. Following on from the link at the bottom, I'm trying to set an interrupt handler in my loadable kernel module onto a seperate core that I've isolated from the normal scheduler (using isolcpus=2,3 in boot.cmd/.scr). I've built the kernel using the Vagrant instructions with the 4.19.50 RT22 realtime patches. But I've also tested with no luck on the standard build from the download page. I'm using the irq_set_affinity_hint in the following manner, but it has no effec…

I installed both earlier and the latest Armbian stretch service versions. Couldn't boot from the micro SD cards. Tried several different micro SD cards too. Nothing showed through HDMI. The red LED on board was double blinking. The board can boot from all three official images.

Using latest freshly installed Armbian_21.05.1_Orangepipc2_buster_current_5.10.34, then went to armbian-config and installed kernel headers. There were no errors so I thought they now should be there, butl /usr/src is still empty. There is also nothing in the system logs that would indicate an error in installing them. Many thanks for any help.

Hi, I've had orange pi one laying around and also couple of camera modules scrapped over different devices, which only one seems to be the "known" model of ov2640, which is supposed to be supported on linux mainline kernel, but unfortunately no module is compiled into armbian image, so I've had to compiled it solely for the running kernel. After lot of digging into the thing, mostly getting inspiration from this forum and threads about 5640, I've tried crafting overlay, with different results. This is the latest attempt, which created /dev/vide0, but no /dev/media0 is made, and also loading module fails with: [ 5812.695851] ov2640: loading out-of-tree modul…

hi im newbie here, i have small question ,sorry if so simple or silly. im confused about size block on armbian system (default system archive) if a make df , the system says 1 kb . Filesystem 1K-blocks Used Available Use% Mounted on tmpfs 102300 7152 95148 7% /run /dev/mmcblk0p1 59601388 1120660 57840424 2% / tmpfs 511492 0 511492 0% /dev/shm tmpfs 5120 4 5116 1% /run/lock tmpfs 511492 0 511492 0% /tmp /dev/zram1 47960 7412 36964 17% /var/log tmpfs 102296 0 102296 0% /run/user/1000 but, if im …

I have installed mate-desktop-environment and enabled lightdm display manager. But there is no choice of session ( XFCE or MATE ) ls /usr/share/xsessions .: mate.desktop xfce.desktop manually created user-session=mate in etc/lightdm/lightdm.conf add sessions to .dmrc but nothig help there is no session choice

root@orangepizeroplus2:/# modprobe gc2035 modprobe: FATAL: Module gc2035 not found in directory /lib/modules/4.14.67-sunxi64 root@orangepizeroplus2:/# modprobe vfe_v4l2 modprobe: FATAL: Module vfe_v4l2 not found in directory /lib/modules/4.14.67-sunxi64 OrangePi ZeroPlus H5, use armbian official build, but no gc2035+vfe_v4l2 module? I heared of these modules already built-in?

I am working onPC + . Both of them have arm 32 bit microcontroller. I want to build image. (just need to use menuconfig) But when i want to do that. I got an error message. Is there any way to use it on 32 bit? [ .... ] Please read documentation to set up proper compilation environment [ .... ] http://www.armbian.com/using-armbian-tools/ [ error ] ERROR in function prepare_host [ general.sh:958 ] [ error ] Running this tool on non x86-x64 build host is not supported [ o.k. ] Process terminated

I am using the Rockpi 4c plus for the first time. I am also trying out Armbian (for the first time) and downloaded the latest stable version for my board (Linux rockpi-4cplus 5.15.93-rockchip64 #23.02.2 SMP PREEMPT Fri Feb 17 23:48:36 UTC 2023 aarch64 aarch64 aarch64 GNU/Linux) Using armbian-config I selected in hardware configuration "spi-spidev". when my board rebooted, I checked the following: dmesg | grep uart This returns: [ 6.120938] dw-apb-uart ff1a0000.serial: forbid DMA for kernel console I then tried dmesg | grep i2c and this returns [ 1.511705] i2c_dev: i2c /dev entries driver [ 1.564824] input: r…

Hi there, recently I bought an Orange Pi Zero3 with 1GB RAM. I want to connect a 20*4 character LCD display(https://www.tinytronics.nl/en/displays/lcd/lcd-display-20*4-characters-with-white-text-and-blue-backlight-with-i2c-backpack) to it. I have previously used this display with Arduino UNO, which worked great. Now I want to use it with the Orange Pi Zero3 (Ubuntu 24.04). I have no experience with the Orange Pi or single-board computers in general. I followed some tutorials, but I couldn't make it work. I did this: Wiring: I2C Backpack Orange Pi Zero3 VCC Pin 2 GND …

Hi , I've got a python script talking to one of the serial port via pyserial. It works fine when I execute using the terminal. If I place it under startup, the behaviour is changed. It doesn't work properly compared former. Has anyone come across this problem. Advise/help is appreciated.