Beginners

I'm using the newest Ubuntu image for my RockPi4C+, and from time to time, I try to login, but it wont allow it. If I reboot, I can login just fine. I tried from 2 devices, both devices could not ssh into the pi. running a cat on /var/log/auth.log doesnt show any attempts at all. After a reboot, I cat the log and can see my login attempts present after the reboot. Its like the sshd service is dying. Mar 17 00:15:01 rockpi-4cplus CRON[1869]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0) Mar 17 00:15:01 rockpi-4cplus CRON[1868]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0) Mar 17 00:15:01 rockpi-4cplus CRON…

hi, I've got a strange Bug with apache2 webdav. Everything works. Read Files, Write Files change Names But i cant delete Files. If i move the File into a Folder i can delete it with the Folder. But i cant delete the File it self. Any Ideas what the Problem is. It cannot be the client i think because it works with other webdav folders. Spoiler cat apache2.conf # This is the main Apache server configuration file. It contains the # configuration directives that give the server its instructions. # See http://httpd.apache.org/docs/2.4/ for detailed information about # the directives and /usr/share/doc/apache2/README.Debian about Debian specific # …

Not related to armbian distribution, just curious. I googled but had no luck to find an answer. For Allwinner SoCs, there is FEL boot tool to download bootloader, kernel and initramfs to ram and to boot the system directly, without writing those stuff onto flash storage and performing a reset; I wonder whether there is a tool to achieve the same function for rockchip SoCs? or we could modify the usbplug and rkdeveloptool to implement the function? or there are any limitations to prevent it? any comments or advices?

Hi I need add custom hdmi timings for LCD Waveshare 5.5" AMOLED. LCD works fine on RPI 4. On Armbian I see 1/3 screen only. Custom timings for RPI is: hdmi_timings=1080 1 26 4 50 1920 1 8 2 6 0 0 0 60 0 135580000 3 How to set it in Armbian image? In /boot/armbianEnv.txt or /boot/boot.scr or with xrandr ?

I just install everything and now i ne3d get out from the text mode.. how do i start at grphic mode.. thank yall..

Good morning I am using a tinkerboard S on Armbian Stretch. I would like to backup using rsync / rsnapshot to a remote nfs share. For the nfs server I tried an rpi3 on raspbian and on armbian omv4. The setup works, but on the actual job, copying a few GB, I get a kernel panic on the Tinkerboard Client everytime. The same jobs works flawlessly to local attached usb storage on the Tinkerboard. http://ix.io/1wJT Thanks for any input und happy Holidays! Sebastian

Hi I've got both left and right channels working of my analog audio jack. The quality is quite good as long as Master audio isn't set above volume 15 - 20 or so. Toggling DAC or DAC-Reversed in Alsamixer will enable or disable the physical left and right physical speakers of ear buds. However! On both channels, the left and right software signals are mixed. So if I use "aplay stereo-file.wav", I hear left+right mixed through my separate left ear. Listening to my right earbud, same story: I hear left+right audio mixed. Please help, I can't even find any snd_ module flags to mess with. I've no pulseaudio installed on this latest stable server edition of …

Hello everyone. I have a custom board with A20 SoC running Buster kernel version 5. Configured device tree, everything works. My problem is that the board uses I2C4 bus to drive CSI1 camera and that I2C4 bus seems to be reserved for HDMI. i2cdetect -l gives i2c-0, i2c-1, i2c-2, i2c-3 and sunxi-hdmi-i2c adapter. Of course, trying to access sunxi-hdmi-i2c adapter from code (c++) or a tool (v4l2-ctl) results in an error as resource is busy. As I don't use HDMI at all and I2C2 bus is free, my question is how can I set dummy I2C2 bus to be assigned to HDMI or somehow release I2C4 bus so it's accessible by camera driver. Removing or disabling HDMI from…

Hi there. Any one have Schematic of LeMaker Guitar CPU Module? I found on a YouTube Video it was available before on official site download section but not available now. Only the Guitar Base Board Schematic now available. It will be very helpful if anyone can share. Thanks in advance. Regards.

I'm trying Monitor Mode under an orangePi pc plus which use the RTL8189FTV chip, And under armbian, After I config it as Monitor Mode, it crash with segment fault root@orangepipcplus:~# iwconfig wlan0 mode monitor Message from syslogd@localhost at Nov 6 03:13:37 ... kernel:[63339.624651] Internal error: Oops: 5 [#1] SMP THUMB2 Message from syslogd@localhost at Nov 6 03:13:37 ... kernel:[63339.740200] Process iwconfig (pid: 9670, stack limit = 0xed9a4210) Message from syslogd@localhost at Nov 6 03:13:37 ... kernel:[63339.746393] Stack: (0xed9a5d6c to 0xed9a6000) Message from syslogd@localhost at Nov 6 03:13:37 ... kernel:[63339.750768] 5d60: …

Hi, I have a question about maximum memory support on Allwinner processors, inc. A20 and A64. In datasheet I see: A20:"Support 2GB address space" A64:"up to 3GB address space" Does these mean the maximum installable memory on them? on the other hand, in official page, written that A64 has 1GB memory support! it is confusing. Thank you

Hello, Recently I installed docker on my armbian and motd got broken. Previously it was printing correctly information about traffic: RX today: 20,72 GiB But after installing docker and playing with some images motd is displaying following error: RX today: Error: Not all requested interfaces found in database or given interfaces aren't unique. The problem is that docker adds new network interfaces that are not initialized in vnstat. I've solved my issue by adding the new docker interfaces in vnstat: vnstat --add -i docker0 vnstat --add -i veth160e0f9 Perhaps /etc/update-motd.d/30-armbian-sysinfo script should somehow detect new interfac…

some one maybe know I have submitted Armbian support for khadas VIM1, what's the different? these images are built with patches/config from khadas (fenix), thus support all their devices. you can get it from Baidu Netdisk: URL: https://pan.baidu.com/s/1sJug0ykaioGUu_G7fDQ1rA Code: py8r 链接: https://pan.baidu.com/s/1sJug0ykaioGUu_G7fDQ1rA 提取码: py8r

Hi ! I spent several hours looking for the solution, here and elsewhere, I didn't find. The Radxa wiki speaks about 2 SPI: 1 and 2 The device tree README speaks about 4 SPI: SPI 0 pins (MOSI, MISO, SCK, CS): GPIO3_A5, GPIO3_A4, GPIO3_A6, GPIO3_A7 SPI 1 pins (MOSI, MISO, SCK, CS): GPIO1_A7, GPIO1_B0, GPIO1_B1, GPIO1_B2 SPI 2 pins (MOSI, MISO, SCK, CS): GPIO1_C0, GPIO1_B7, GPIO1_C1, GPIO1_C2 SPI 3 pins (MOSI, MISO, SCK, CS): GPIO2_B2, GPIO2_B1, GPIO2_B3, GPIO2_B4 So, the correspondence seems to be: radxa SPI 1 <=> DT SPI 1 radxa SPI2 <=> DT SPI 3 With the latest kernel (5.10.12-rockchip64, Deb…

Sorry but i can't change display resolution with armbian 5.75 in one orange pi pc plus: ARMBIAN 5.73 stable Ubuntu 18.04.2 LTS 4.19.20-sunxi -h3disp not found -armbianEnv.txt not working -Documentation not easy and don't work Thanks a lot.

I think my level of proficiency with armbian has earned me an "ignore" status here :-) I am trying to configure the serial port on a Banana Pi M2 Zero. I have done it a Raspberry PI and confirmed that all works well. Can anyone help me with he following questions? How do I enable the UART for GPIO 14 & 15 (Pins 8, 10)? How do disable serial console mode (had to do this in raspbian)? How do I disable RTS and CTS using parameters? I will donate $20 as soon as a UART connection is made.

I see multiple projects on GitHub for getting RTL8812AU devices working on Armbian. Right now, I'm working with a NanoPi M1 while I wait for a rock64 to arrive in the mail. I can get a driver to build, make and make install, but I cannot get the device recognized. The last project I tried was this: https://github.com/diederikdehaas/rtl8812AU

Hi, I have been using Armbian for the Tinker Board S for quite a while and communications with my peripherals using /dev/spidev2.0 had been working fine. I just did a an apt update and then an apt dist-upgrade and now it appears that /dev/spidev2.0 is gone. The /boot/armbianEnv.txt looks fine (untouched) and still has spi2 and spidev2 listed in the overlays. I did see that the dist-upgrade touched the rockchip overlay and I am trying to figure out what changed there. In the meantime, is there a way to get spidev2.0 back? Thanks in advance. PS: Details. broken w/ Armbian Buster with kernel 5.10.34-rockchip #21.05.01 w/ XFCE …

I met 2 issue. 1) All my USB attached device suddenly disappear today. 2) I tried to upload my diagnostic, it kept showing error that I had firewall which I didn't. Anyway I copied to a file. Please kindly help me see why is my USB all undetectable? Also I tried using sudo armbian-config Looking at system and hardware. It is all empty. Dianostic.txt

Hi I was trying to setup my RK3328 based A5X Max tv box running armbian ( a fairly recent version 4.4.154 based) as an access point. Yesterday I tried the armbian-config option, and it downloaded/setup things and the access point worked. Because I only need it as an access point sometimes, I went back through armbian-config and turned it off. Today I tried to go through armbian-config and start an access point again, and I see the access point option has disappeared from Networking in armbian-config. !!! Has something changed recently? I might have done a update/upgrade in between. Or does armbian-config just set it up, …

Hi, Im using orangepi pc with armbian jammy. On download section there is only 2 choices, CLI and Desktop. Is there a custom desktop version where most (or if possible all) applications are not installed? It would take too long is I uninstall it one by one. I think I only need browser and terminal.

In settings -> keyboard -> view and customize shortcuts -> launchers -> search I am trying to set this to Windows Key + S, it doesn't register the windows key at all as being pressed, so what keyboard do I choose to be able to use the full k400r keyboard inclusive of the windows key. Many thanks Newbie (please be nice, I'm new to Armbian and SBC's)

I'm using OrangePi-Lite2 board with image : Armbian_20.08.1_Orangepilite2_buster_current_5.8.5.img Most of the functions that are important, do work well as of now. There are two major issues : 1. I setup my Bluetooth headset from armbian-config and it is paired and connected and I'm able to output a .wav file using aplay etc. However, I can not record anything from the microphone with arecord. No devices are listed for recording. But when I connect a USB microphone to the board, I can record well with arecord. Bluetooth record function is very important for me right now. Appreciate any pointer as how to get it to work. Thanks. …

on orange_pi pc plus i run nand-sata-install and after progress is 100% i see this error cp: error writing '/mnt/nand-sata-install.Qdjq7T/bootfs/boot/initrd.img-5.15.74-sunxi': No space left on device cp: error writing '/mnt/nand-sata-install.Qdjq7T/bootfs/boot/armbianEnv.txt': No space left on device cp: error writing '/mnt/nand-sata-install.Qdjq7T/bootfs/boot/armbianEnv.txt~': No space left on device cp: error writing '/mnt/nand-sata-install.Qdjq7T/bootfs/boot/boot.bmp': No space left on device cp: error writing '/mnt/nand-sata-install.Qdjq7T/bootfs/boot/boot.cmd': No space left on device cp: error writing '/mnt/nand-sata-install.Qdjq7T/bootfs/bo…

I am on an OrangePi zero plus H5: Linux orangepizeroplus 5.10.60-sunxi64 #21.08.1 SMP Wed Aug 25 18:29:57 UTC 2021 aarch64 GNU/Linux Editing the dts via armbian-config, the sun50i-h5-orangepi-zero-plus2.dtb is edited and compiled, while the board boots into sun50i-h5-orangepi-zero-plus.dtb -rw-r--r-- 1 root root 31117 Mar 29 16:55 sun50i-h5-orangepi-zero-plus2.dtb -rw-r--r-- 1 root root 31121 Mar 28 16:39 sun50i-h5-orangepi-zero-plus2.dtb.bak -rw-r--r-- 1 root root 31144 Aug 25 2021 sun50i-h5-orangepi-zero-plus.dtb

I did flashing the firmware of ZIDOO H6 PRO. After that, the original firmware does not boot (even when connected to the power source, the LED does not work). However, operating with firmware on ZIDOO H6 PRO will operate normally. I think something is LOCK in NVRAM. Has anyone solved this problem?

Has anyone tried to get a hyperpixel4 screen (GPIO) to work with armbian? Seems easy enough on a raspberry pi but i want to use a orangepi zero 2 and haven't been able to get results. Any help?

hi im newbie here, i have small question ,sorry if so simple or silly. im confused about size block on armbian system (default system archive) if a make df , the system says 1 kb . Filesystem 1K-blocks Used Available Use% Mounted on tmpfs 102300 7152 95148 7% /run /dev/mmcblk0p1 59601388 1120660 57840424 2% / tmpfs 511492 0 511492 0% /dev/shm tmpfs 5120 4 5116 1% /run/lock tmpfs 511492 0 511492 0% /tmp /dev/zram1 47960 7412 36964 17% /var/log tmpfs 102296 0 102296 0% /run/user/1000 but, if im …

look at the text: "behing" should be "behind"

I am using Armbian 23.5 Jammy XFCE on a Tinker Board 2S. I have a number of issues to sort, one of them being display. The display is receiving a 16:9 signal, but the right hand side of the screen is covered by a black-white-green pattern under which I can move windows (image attached). How can I change the settings to avoid this?

Hi ! I recently tried to use vlc and more specificly the RTSP flux, but it return an error when connecting "Vlc is unable to open the MRL ...". This error dont come of my network, i can ping the server of the rstp stream, on the second hand, it perfectly work on another pc. Well i think it come from armbian but what i am missing ? Thank

Good day, I hope this email finds you well. I would like to create a custom animated screensaver and splashscreen on my Linux Armbian. I am current running the Jammy KDE Plasma version. Can you please guide me on how I can get this right and what I need to do to achieve this? I am also experiencing some graphical issues where some of the words disappear? Is there a fix for this? I am also trying to access the internet through wifi but it does not allow me to connect to my network. Any advice on how to get this right? Looking forward to hearing from you.

Hello, I'm trying to use pin PC3 as an interrupt, but it returns the error code -22 in the gpio_to_irq() function. In user-space i can use it normally as a GPIO, but I need it to function as an interrupt in a driver. Board: Orange Pi One, Armbian 23.8.0 #define GPIO_PIN 67 #define GPIO_PIN_DESC "GPIO PC3" static int __init mytapp_controller_proc_init(void) { int ret,gpio_irq; uint8_t idx = 0; printk("mytapp_controller_proc_init 444%d\n",GPIO_PIN); msg = kmalloc(PROCFS_MAX_SIZE, GFP_KERNEL); if(!msg){ printk(KERN_ALERT "Error: kmalloc error\n"); return -ENOMEM; } if (gpio_request(GPIO_PIN, GPIO_PIN_DESC)) { printk("GPIO re…

Hello. Rebuiled 5.3.9 kernel with .config taken from Armbian dist. and it's working great. But when i rebuild it with support KPROBE option in fails to run. What could be a reason it happens? Config file in attach. Starting kernel ... Uncompressing Linux... done, booting the kernel. Loading, please wait... starting version 232 [ 4.283026] Internal error: Oops: 5 [#1] SMP THUMB2 [ 4.287921] Modules linked in: pinctrl_axp209(+) [ 4.292568] CPU: 0 PID: 205 Comm: systemd-udevd Not tainted 5.3.9-sunxi #177 [ 4.299637] Hardware name: Allwinner sun7i (A20) Family [ 4.304886] PC is at load_module+0x14d8/0x1a54 [ 4.30…

Hello, I'm using armbian on Orangepi PC PLUS and i'm controlling GPIO pins with Python. Everything is working fine when I start my Python script. Problem is during boot with GPIO3, because it's by default on pull up, and that is making me problem on device which is connected to that pin. Can I change that pin to be default OUT and pull down? When my python scripts starts, it will change GPIO3 to OUT and set it to 0, but I have only problem during boot.

I recently bought an Odroid HC4 to use as NAS. I then installed the latest Armbian (kernel 5.10, so pretty current one) and zfs-dkms (2.0.3-1, from backports - so again should be pretty current). I can now create ZFS pools from my attached HDDs (currently just one - may mirror later). Great... except I want them encrypted and performance is BAD. Like 40 to 70MB/s when copying via Samba (depending on which cypher I create the dataset with, no compression or deduplication) and CPU pegged at 100% bad. I was honestly surprised by this, considering the S905X3 is supposed to have hardware crypto acceleration (and cryptsetup benchmark shows results more in line with …

My environment is ManjaroLinux, x86 with docker installed on the system, I want to build the system for orangepizero3 via Arbian/build, I chose the CSC version, but there is an error during the build process, here is the log file:log How should I this problem? Thanks.

Hello all, Orange Pi 5b v1.1 16GB/256GB # Wi-Fi 6 and WPA3 are not available options in current Debian Cinnamon release. # OP 5b does have these features so comparability isn't an issue. # Works fine with Orange Pi images. # All steps given on download page were taken. Help would be greatly appreciated. Thanks.

Hi. Does anyone have the deb package of the linux-headers-3.4.113-sun8i.deb? There isnt in the repository anymore. Kind regards.

Hi I'm trying to use OpiZero with a relais module. I noticed, during the boot the pins I tried (12 and 11, physical 3 resp 5) go high, which makes impossible to manage the relais module. Is it a HW/SW bug or limitation or something what can be configured somehow. I would expect the level to be "nothing" ;-) Thanks Chris

the system does not start with emms, the red light lights up and that's it, I tried to record another version of the uboot, the armbian icon appears and the wheel spins does not respond to pressing the keys. I couldn't write the issue to the bugtracker....

I am working on getting the MCP251x device running in mainline. So far the SPI and other entries in the device tree are fine. However when I bring the bus up it fails to acquire the interrupt. I think the way I am defining the interupt is incorrect. I had this working in 4.4 so i know the hardware is functioning correctly. Does anyone know how to properly define the interupt and interupt parent in this case? spi1: spi@ff1d0000 { compatible = "rockchip,rk3399-spi", "rockchip,rk3066-spi"; reg = <0x0 0xff1d0000 0x0 0x1000>; clocks = <&cru SCLK_SPI1>, <&cru PCLK_SPI1>; …

Hello everyone, I need to run below code so I can convert speech to text on my OPi Lite. ////////////// import speech_recognition as sr rec = sr.Recognizer() with sr.Microphone() as source: audio = rec.record(source, duration=15) print("Converting...") output_text = rec.recognize_google(audio) print(output_text) ////////////// speech recognition is installed, but everytime I try to run below code, I am getting these odd errors. I tried several different ways, wonder if someone have had same issue and had fixed it. ///Error//// ALSA lib pcm.c:2664snd_pcm_open_noupdate) Unknown PCM cards.pcm.front ALS…

I have a couple NanoPi (Neo, Neo 3, R2S, Neo 2 Black) devices and recently I wanted to tinker with trying to get them to be an IP KVM. The hang-up I hit is that I can't get g_hid to work. I am in way over my head but usually my google-fu gets me through. I can't find what I am looking for and it seems that most of the posts on the forum were from 2017 when there was an issue with the kernel that was supposed to be resolved. I am running Armbian 20.08.7 Bionic with Linux 5.8.13-sunxi on a NanoPi Neo (H3) but the error is on all of the devices. Anyway, the error I am getting is: root@nanopineo:~# modprobe g_hid modprobe: ERROR: could not insert 'g_hid': No…

Hi folks, I'm new to the Armbian project. I have an old board (pcduino3nano) that I never managed to get working because I found the built in OS to be lacking and the general linksprite environment poor as compared to that of the RaspberryPi. So I put the pcduino away for awhile and never really got anywhere with it, but recently decided to give it a go again. I found two projects that claim to "officially" support this board (either current or past). Armbian and Fedora for Arm. Because Armbian has EOSd the pcduino family of boards I started with the Fedora project and found that it worked but only as a server/cli the GUI no matter which deskto…

Hey, I am struggling with my installation. Came from an ubuntu 1,5 to 2 years old. And startet Updates because my bananapi lost the connection. only rebooting helped. So I thought I get rid of this behaviour by getting the latest Software. It actually got worse. I ended up recognizing read errors on the ssd, where the system runs on. I startet with a fresh sd and newest armbian. System Runs stable. But when I attach the ssd and Mount it, I get errors After some time. I did Not yet transferred the new system to ssd. Its the old ssd. Any idea what I should check or the error is? see Screenshots. https://m.imgur.com/a…

Hello I`m install armbian 5.60 on my Orange Pi WinPlus and next VNS server and connect from Windows use the VNC Viever but the desktop is missing I see just this screen Not sure but meyb I instal the server version How I can check this and if it`s it`s possible to update for desktop version My SD card have only 2GB . Regards

Hello, I'm running some busybox scripts in infinite loops. I have used them from long time, before I move to armbian, they work on openwrt without any problem , some of the machines was with uptime half a year and scripts never stop working. After I move to armbian, I noticed they stop from time to time. usually after 4-5 days of running. Script is run with output redirected to /dev/null There is no trace why script is stop working in the logs, so I run it in screen terminal and detach, it works more than a week without failing ........... is there a better way to see what is going on?

Hello, I try to compile node.js on my BananaPI M2+. Everly now an then I get segmentation faults, internal compiler errors. The strange thing is, then when I restart, it runs further, just to crash at some later point. I already reduced cpu speed to 1GHz, and I am only compiling using one core, now. CPU temp is aroung 60°C now. Still every now and then, it happens. Checking with top, memory seems to be doing fine, too. What else cound I do? Regards, Tomte. PS: I am using a new SanDisk Ultra 16GB SD card. PPS: According to Rpi, I am running out of memory, how can I prevent this, ple…

I have attached sc16is740 to the I2C port of BPI. sc16is740 is a device that lets me work with i2c like a uart. The device is detected with the comand: sudo i2cdetect -y 0 nº48 00: – -- – -- – -- – -- – -- – -- – 10: – -- – -- – -- – -- – -- – -- – -- – -- 20: – -- – -- – -- – -- – -- – -- – -- – -- 30: – -- – -- – -- – -- – -- – -- – -- – -- 40: 40 – -- – -- – -- – 48 – -- – -- – -- – 50: – -- – -- – -- – -- – -- – -- – -- – -- 60: – -- – -- – -- – -- – -- – -- – -- – -- 70: 70 – -- – -- – -- – Then I have load the driver with: sudo modprobe sc16is7xx 0x48 Using: sudo modprobe sc16is7xx I see the mo…

Hello! Is there any way to read all 1-Wire Dallas Thermometers at once (not to read one-by-one)?

Hello, I installed armbian on my board and decided to attach HDD to move rootfs on it. So I used script which you provide nand-sata-install. It worked as expected but not sure why it kept /boot still on SDcard? I do understand that uboot needs to be still on SDcard present, but uboot should be able to find /boot directory also on HDD partition, right? Or is there some compatibility issue, why this approach was decided? My concerns are if sdcard dies, i need to recreate not only uboot but also /boot. JV

I can run spi with the code below. But I have to communicate with too many slaves on the same line. I will connect all the devices with the same MISO - MOSI - SCLK line. static void transfer(int fd) { //n.SLAVE CS LOW int ret; uint8_t tx[] = { 0xAD, 0x03 }; uint8_t rx[2] = {0, }; struct spi_ioc_transfer tr = { .tx_buf = (unsigned long)tx, .rx_buf = (unsigned long)rx, .len = 2, .delay_usecs = delay, .speed_hz = speed, .bits_per_word = bits, }; ret = ioctl(fd, SPI_IOC_MESSAGE(1), &tr); if (ret < 1) pabort("can't send spi message"); //n.SLAVE CS HIGH puts(""); } Can I do like above? So I will use software CS, not …

Seems like network namespaces doesn't work in Armbian 3.4 kernel. Armbian 4.13 works fine. Is it possible to fix it? How to reproduce: ip netns add test ip netns exec test ip a Armbian 3.4 shows all interfaces (it's wrong) Armbian 4.13 shows only 1 interface (lo, it's ok)

Hello, I'm trying an installation of Mastodon instance on tinkerboard running with Armbian OS. I follow this topic : https://github.com/tootsuite/documentation/blob/master/Running-Mastodon/Production-guide.md the last command i ran was bundle install -j$(getconf _NPROCESSORS_ONLN) --deployment --without development test it returned me : Fetching: hiredis-0.6.1.gem (100%) Building native extensions. This could take a while... ERROR: Error installing hiredis: ERROR: Failed to build gem native extension. current directory: /home/mastodon/.rbenv/versions/2.5.0/lib/ruby/gems/2.5.0/gems/hiredis-0.6.1/ext/hir…

Do i need a new kernel or something because if i plug in my wifi Adapter it says no firmware

Hello people! I have a NAS on my local network. I want to use its NFS share in Armbian Just like I do with the Debian x86 desktop. (I want to say that the NAS is configured correctly). Скрытый текст . /_\ _ _ _ __ | |__(_)__ _ _ _ / _ \| '_| ' \| '_ \ / _` | ' \ /_/ \_\_| |_|_|_|_.__/_\__,_|_||_| v25.8.1 for RK3318 Box running Armbian Linux 6.12.42-current-rockchip64 Packages: Debian stable (bookworm), possible distro upgrade (trixie) . However, I had some problems with armbian. I followed the general NFS instructions for debian. but it didn't work. I followed the instructions for armb…

I have downloaded the cli image file and imaged it to a SD card. However, when I attempt to boot, I never get a screen. I tested the board using the NanoPi-R6 image file and do get the initial setup for Armbian. However, it does not recognize USB devices. I realize that the image for NanoPC-T6 is a work-in-progress, but I don't understand why it doesn't boot. Am I doing something wrong?

I'm using an Orange Pi Zero Plus 2 trying to setup double spi. By configuring my boot armbianEnv.txt I am able to see two spi devices. verbosity=7 logo=disabled console=both overlay_prefix=sun50i-h5 overlays=analog-codec spi-add-cs1 spi-spidev uart1 uart2 usbhost2 usbhost3 param_spidev_max_freq=12000000 param_spidev_spi_bus=1 param_spidev_spi_cs=1 user_overlays=spi-double-spidev-cs sun50i-h5-spi-cs usbstoragequirks=0x2537:0x1066:u,0x2537:0x1068:u However I only see one chip select working on the physical board. Is there something I need to do to assign with gpio the second chip select will be on? Thanks, Dan

Hi, I have a broken Odroid C2 from a customer. I've never used Odroid so I was wondering if I bought a Odroid C4 and insert the card will it run ok ? Don't know any info about what's in the sd card. The customer bought from a supplier he no long intends to work with ever again. Can anyone help me in any way ?

Hi, I know that the cubieboard2 is quite old, but I also got the impression from the forum that there should be a NAND support available somehow. Is there anybody who could give me a hint what I need to do to activate the NAND on the latest armbian-buster image? That would help me a lot .

Hi, I'm using an Odroid C2 with 8 DVB-C/T (6x TechnoTrend TT-TVStick CT2-4400 and 2xTECHNOTREND TT-connect CT2-4650). Those DVB-C are connected via 2x 4 ports USB 3.0 which are connected in USB C2 ports. The problem is that if I'm using 4 or maximum 5 DVB-C, Odroid C2 has a CPU usage about 30-40% from 400%, so pretty low usage. Now the issues are starting: if I'm trying to start another DVB-C or if I'm doing for example something which uses high CPU suddenly Odroid C2 is rebooting. This is the first thing. The second thing is that the DVB_SKY_2 seems to crash when the mumudvb is starting on a DVB device. The third issue is that I can't change …

Is anyone prepared to sell me a 16Gb micro SD card preloaded with Raspbian O/S for Banana Pi BPi-M2 Berry board. I have been trying for some weeks now to install this O/S but I just can't get Phoenix Card to work. I have had lots of advice but none of it works. Can anyone help. Regards, robjim418@gmail.com

# apt-get update Stary:1 http://ports.ubuntu.com jammy InRelease Stary:2 http://ports.ubuntu.com jammy-security InRelease Stary:3 http://ports.ubuntu.com jammy-updates InRelease Stary:4 http://ports.ubuntu.com jammy-backports InRelease Ign:5 https://apt.armbian.com jammy InRelease Ign:5 https://apt.armbian.com jammy InRelease Ign:5 https://apt.armbian.com jammy InRelease Błąd:5 https://apt.armbian.com jammy InRelease 500 Internal Server Error [IP: 107.175.134.226 443] Czytanie list pakietów... Gotowe W: Nie udało się pobrać https://apt.armbian.com/dists/jammy/InRelease 500 Internal Server Error [IP: 107.175.1…

Was on the edge vendor kernel and now swapped to 6.1.115-vendor-rk35xx And i just cant seem to get full hardware functionality with Jellyfin, Specifically tone mapping and subtitle burning crash. Atleast the tone mapping seems to be a lack of /dev/mali0 Is there a kernal or version that has all the drivers / firmware support for a fully jellyfin use? Sorry if I'm mincing words.

After flashing the last release (21.02.3) of Buster for Orange Pi One Plus H6 I discovered that no sound card was available. aplay - l gave: Then flashing a one year old version (20.02.1) the hdmi audio was available. But after making the updates, apt-get update , apt-get upgrade and enabling the Desktop aplay -l gives : no soundcard found. Please Help Regards https://www.fiatb.fr

Hi, I'm doing some small changes to the nanopi-neo-air dtb. I am working from a decompiled dtb file. I would like to work from original patched Armbian dts files to get a better understanding without ploughing through device tree documentation. Where can I get Armbian patched kernel dts files ?

On my NanoPi Neo Core, the flash has the following partitions: Most of the drives I've encountered have the starting sector set as 2048, while this one has 49152. I'm assuming that U-Boot reside before the 49152th sector. How can I see what is below 49152th sector in the partition table?

I installed gnome-software on armbian Ubuntu 20.05 based on Ubuntu 20.04 LTS, the gnome-software store opens when I try to install any software, the store closes and does not install, can someone help solve this problem, I was only able to install the program when I installed it the snap-store by the chromium browser I downloaded the snap-store armhf version.

Hi all, Is there any reasonable way to login into Docker container and edit u-boot sources without running ./compile.sh script every time when container is created ? Is there any option to just create container and log into it ? I created Docker container by running command: ./compile.sh docker BOARD=bananapi BRANCH=next KERNEL_ONLY=no KERNEL_CONFIGURE=no RELEASE=stretch armbian Docker image is created. Now I want to edit some sources in u-boot directory but when I am running docker run -it armbian bash it immediately runs ./compile.sh script. I did check entrypoint definition in Dockerfile but still can't figure out how to actually …

Is it possible to install a modern OS on H3 board ? like Ubuntu 18.04 LTS or 19.04 with a kernel 5.x Only build available here are pretty old with linux kernel v3 ou v4

ı have a lcd as ' http://s.aliexpress.com/NjiyQFvE ' . I do all the connections correctly but the LCD screen does not appear. At first, a white light comes out on the screen. I could not find a manual or guide about this LCD. How can ı chane the resolution as http://www.orangepi.org/Docs/LCDModule.html

Hi. I have multiple USB wifi sticks and I would like to be able to connect to my wifi network without having to enter the device mac etc. using nmtui. Is it possible to use wlan0 as the device? Thanks. J.

Sorry if that already has been answered, couldn't find anything via search function: I have a 1920x1200 TFT attached, works well with 1080p but of course everything is a bit stretched. I tried to understand how boot.cmd/scr work, but essentially there are no entries in those files for that resolution. Search for fdt_disp_mode showed up exactly 2 hits on Google So I'm a bit lost. Is it possible at all?

Hi. I'm trying to display a rtsp stream using vlc, on a tinkerboard, running armbian, legacy desktop version. It runs very choppy. I have a duplicate setup using the Raspberry pi 1, which has much fewer resources, runs smoothly. Anyone got any idea why?

The /sbin/armbian-install script that ships in Armbian_22.08.7_Odroidn2_bullseye_current_5.19.17_minimal.img.xz has a couple of faulty lsblk arguments that cause it to exit instead of allowing the user to select the installation target partition. The script works properly after both instances of the string MOUNTPOINTS are changed to MOUNTPOINT which is easily done with sed -ie s/MOUNTPOINTS/MOUNTPOINT/ /sbin/armbian-install

Hi Would like to thank all that have participated with Armbian, This is great. This is my log report http://ix.io/3ym9 I have a Tinker board v1 installed Armbian & focal, did all the update & upgrades. The trubble i was having: installing docker via softy, it stops at 52 paks and 100% but does not install the docker. I have tried this with Bullseye and that works but not in focal.

Hi, I have 5 cubieboards 1. I want to give to my employees, so i decided to install desktop ambian installed on nand (neither sata nor sd card). Q) Why not installed on sata and sd card? Ans) firstly the work is into excel only (data entry work). Secondly i dont want to give more space because they start downloading songs, game, videos, torrent and movies.So get slow speed of internet . Thirdly save money to buy sd cards and sata hdd. My questions are:- 1) Where i get the old desktop image file to install it into nand? 2) I have this file armbian_5.25_cubieboard_ubuntu_xenial_default_3.4.113_desktop.7z. I find out in my …

Hello everyone, my wife has transitioned my family to google calendars and in an effort to keep myself up to date I built a Magic Mirror using an OP PC+. It worked beautifully in testing in standard video layout but to effectively use the screen I have mounted it rotated in a frame and this is where my problems began. Upon rotating the image in XFCE either 90 or 270 degrees video performance drops to single digit FPS. No increase in CPU utilisation so i cannot understand what the issue is. I have done a bit of googling and there is litle information and no apparent solution available. has anyone else suffered with this? …

Hi friends !! I Install the latest version of Armbian Debian for the TinkerBoard S but at the beginning I have the problem of seeing that the image is always distorted, it is similar to having interference, it had not happened before with other operating systems. It also sometimes turns off meaninglessly or the mouse stops working. THNX 4 todos !! ; o)

I am using a 32-bit orangepi plus 2E with debian. I get the following message: TOR BROWSER REQUIRES A CPU WITH SSE2 SUPPORT.

Hi, During the development time I keep trying and flashing the SD card all the time. Is there a way I can flash the SD card without taking out from the board with my board is connected to the computer?

hi, i have a c compiled app & i would like to encrypt it but using H3 implemented security to protect it is this even possible ?

I have to use older version of armbian which i can get from archive. Unfortunately then i cant get the linux-headers via the armbian-config tool, i.e. the /usr/src directory keeps empty. After update/upgrade it will get the headers but only in the latest version. How to get older kernel AND suitable Header? Thxs,

I don't know how to explain this, so I start with my hardware: Two Odroid HC1. I love swapping Kernels, default was 5.4.199 but that was "too old" because I like it bleeding edge. Did upgrade both to 5.17.5 and it works like a charm! Really good performance and some errors from dmesg disappeared too! However the problems did not wait for long: Kernel 5.19.x broke fstrim commands on my SATA drives so I rolled back, everything was good on 5.17.5 again. My logs showed TRIM was supported and running again, cheers! Now to the actual problem at hand and this might be my own doing. I froze the upgrades in armbian-config. Thinking this would prevent upgrading to the n…

After upgrading to newest kernel 5.3.0-rc7, the colors in my monitor are all inverted, I guess as shown in the added photo. I am using odroid-n2 from hardkernel.

I just installed Armbian for the first time. I tried the Trixie-current-minimal at first, but that didn't want to start for whatever reason. Should I try installing an Ubuntu one? I'm clueless. [edit] I managed to get Trixie-current-minimal working. Same issue.

I am planning to buy a SopineA64 set of modules and the Cluster board. (clusterboard) I would like to know if someone here made a cluster. I would like to create it with Armbian since I am an enthusiastic Armbian user. I would like to create a real cluster and not a list of computers unified by a board. I mean to have the disk united and ram united. Something of real cluster computer. Sorry for my english.

Unable to boot Cubieboard 1 after install armbain on sata hdd. I use Boot from nand - system on sata

Hello again, I was forced to reinstall OS and right now I have no sound at all. https://paste.armbian.com/omovipuyub I did try this but still no sound. cat /proc/asound/cards 0 [Codec ]: H3_Audio_Codec - H3 Audio Codec H3 Audio Codec 1 [sun9ihdmi ]: sun9i-hdmi - sun9i-hdmi sun9i-hdmi

I installed Armbian 23.02.2 aarch64 running kernel 6.1.11-meson64 on Le Potato and the system is running great with xfce4 as the desktop. Once I shutdown or restart, upon restart to the desktop the monitor is clear from the left side to the middle of the screen but the last 1/3 of the screen on the right is slightly fuzzy like the its out of focus. There was no problem of this upon install and first boot of xfce4. I have tried running Armbian Buster image and it works just fine everytime with no issue the entire screen is crisp and clear. For some reason when I installed bullseye it only works once after initial install and setup and then on is fuzzy on the right 1/3 …

Hello everybody, is it possible in u-boot (boot.ini) to make a user input and let the user choose from A or B and according to the choice load a particular uInitrd? In case a non-valid answer is given a default answer should be used. Best of all would be if I could implement a time-out. When user does not make input answer B should be selected. I would know how to do this in bash but is that also possible in boot.ini somehow?

How to change font / view size in qbitorrent. The menu items are very small. In the settings under Appearance no effect on the font size in qbittorrent. $ hostnamectl Static hostname: Icon name: computer Machine ID: 4147 Boot ID: 129d Operating System: Debian GNU/Linux 10 (buster) Kernel: Linux 5.4.20-rockchip64 Architecture: arm64 $ uname -a Linux RockHomeServer 5.4.20-rockchip64 #20.02.1 SMP PREEMPT Mon Feb 17 04:45:00 CET 2020 aarch64 GNU/Linux Thank you very much!

Flashing odroidc4 images, each installation gets an identical IP address of '00:50:43:84:fb:2f' as specified in https://github.com/armbian/build/blob/7d758026b57380b17b6337e23b053db01c7e0b3d/config/bootenv/meson.txt This gets especially cumbersome with encrypted rootfs. Is there any way to override this without having to rebuild the image? Ideally the hw MAC address would be used, but being able to configure it through a simple change of the boot parameters after flashing would also work.

Cubietruck-like board. Omnima A20 micro PC Image for Cubietruck, Ethernet connection does not work, but spdif optical works. Ethernet connection does not work solution in the topic "No IP address for Ethernet connection (Cubietruck-like board)" Image for Cubieboard2, Ethernet connection works, but then spdif optical does not work, only analog audio. I need an Ethernet connection and spdif optical, how can I enable it in the Cubieboard2 image? Thanks!

Dear members of the forums. I am shopping for a new single board computer, already have a few manufacturers, but I am not sure yet. Couple years ago I bought BPI-M2U from Sinvoip, and I regretted that soon. Sinvoip was not providing good documentation nor open source contributions of drivers. So to avoid the same situation, I'd like to ask which manufacturers are co-share, contribute to open source and don't sell boards with schematic errors? Orange Pi (4) Khadas (Vim3) Friendly Elec (m4) Odroid (N2) Thank you in advance and sorry if this is not the right forum.

Hi , I am using Apparmor on my filesystem which is read only , I am creating a profile to modify a file by trying to give it read write permission . Can anyone help in the direction . Is it possible to modify a file using apparmor on a ro filesystem.

Hey there, has someone got bluetooth working on his Banana Pi M2 Berry? I looked up that the bluetooth chip (ap6212) is connected via UART3, so I changed the "ttyS1" to "ttyS3" in /etc/default/ap6212, but the service 'ap6212' crashes with several input/output errors. While reading about similar problems with different boards I discovered that the ttyS3 / UART3 is not enabled on my device, at least "dmesg | grep ttyS3" does not find anything, while "dmesg | grep ttyS0" and "dmesg | grep ttyS1" does show that these devices are enabled. There adding the lines "overlays=uart3" / "param_uart3_rtscts=1" helped them, but these lin…

Hi guys! I've a project with raspberry pi B+ and a usb modem for communication with server. Is a unattended system but I've many problems with communication cuts and memory card corrupted. Communications is not important issue, because isn't a real time system, and I manage the cuts with own scripts. In the other hand, the memory card corruption is a damn headache. I think that problem is caused by the model B+ because I've other similar project with model A+ and I haven't this problem. The reason for my question is that I'm looking for alternatives to the raspberry pi B+. I tested Orange Pi 2G-IOT, but is very unestable and I discard it. What borad…