Beginners

[ .... ] Installing from repository [ linux-u-boot-orangepi3-lts-edge ] [ error ] ERROR in function install_deb_chroot [ main.sh:589 -> main.sh:550 -> debootstrap.sh:69 -> distributions.sh:292 -> image-helpers.sh:225 -> general.sh:0 ] [ error ] Installation of linux-u-boot-orangepi3-lts-edge failed [ orangepi3-lts jammy yes sunxi64 ] [ o.k. ] Process terminated [ error ] unmount_on_exit() called! [ main.sh:1 -> image-helpers.sh:0 ] [ o.k. ] Unmounting [ /home/bogdan/build/.tmp/rootfs-664a2c64-6020-46d2-9a3d-befe609b050d/ ] [ error ] ERROR in function unmount_on_exit [ main.sh:1 -> image-helpers.sh:94 -> general.sh:0 ] [ error ] deboot…

nmcli states eth0 is connected on 192.168.1.10 but putty times out with 'connection refused'. Relevant screenshots attached. Many thanks in advance for any help Joe

i want to use led on/off 7 pin (gpio 40 header) but it doesn’t work. Others work fine: echo 20 > /sys/class/gpio/export echo 23 > /sys/class/gpio/export echo 40 > /sys/class/gpio/export echo 42 > /sys/class/gpio/export echo out > /sys/class/gpio/gpio20/direction echo out > /sys/class/gpio/gpio23/direction echo out > /sys/class/gpio/gpio40/direction echo out > /sys/class/gpio/gpio42/direction echo 1 > /sys/class/gpio/gpio20/value echo 1 > /sys/class/gpio/gpio23/value echo 1 > /sys/class/gpio/gpio40/value echo 1 > /sys/class/gpio/gpio42/value May be problem in pwm10 pwm10 { …

Dear all, I am trying to install ZFS on my ODROID N2+ without success. I am sure this question has been asked before, but I don't think the answers I found are still relevant, unfortunately. Linux odroid 6.6.47-current-meson64 #3 SMP PREEMPT Mon Aug 19 04:04:32 UTC 2024 aarch64 aarch64 aarch64 GNU/Linux BOARD=odroidn2 BOARD_NAME="Odroid N2" BOARDFAMILY=meson-g12b BUILD_REPOSITORY_URL=https://github.com/armbian/build BUILD_REPOSITORY_COMMIT=89476e86f LINUXFAMILY=meson64 ARCH=arm64 BOOT_SOC= IMAGE_TYPE=stable BOARD_TYPE=conf INITRD_ARCH=arm64 KERNEL_IMAGE_TYPE=Image KERNEL_TARGET=current,edge KERNEL_TEST_TARGET=current FORCE_BOOTSCRIPT_UPDATE=y…

Hi, if anybody would like to use - please see attached script for backup of block devices. I used it when executing backup for topics: http://forum.armbian.com/index.php/topic/2073-orange-pi-plus-2e-upgrade-to-520/and http://forum.armbian.com/index.php/topic/1681-migrate-from-orange-pi-plus-2-to-orange-pi-plus-2e/ Requirement: dd, gzip, ssh client (I guess they should be available by default on every system) lsblk, mount (should be available on every system) pv tool; you may install it "apt-get install pv" Script is identifying list of available block devices. The condition is that it should be block device with at least one partition and it cannot be mounted at the…

It says 4.13.x in nightly kernel builds but i cant still enable g_hid. In this link it says 4.12 would bring usb otg support for h3 boards. Am i wrong? If its still not supported and wont get implemented soon what should i do to implement it? I also read that g_hid should work in legacy kernel but it didnt work with lastest legacy kernel either. I am trying to get it working for a few weeks now my whole project is stopped because of this. Its would bring me joy if i could get it working. Thank you

I have 2 32GB cards, one does 40/20MB/s the other 80/10MB/s, +-, as measured. Both class 10. I understand there are some limits on the SD bus, thus you can not use max speed a card may eventually provide. So my question, which one would be preferred ti be be used? 40/20 or 80/10. Thanks.

When Ubuntu server – legacy kernel. When i open mopidy and Logitech media server ports 9000 and 6680 should be open. But only port 22 is open. I use orange pi plus. I have not had that problem with any other os on raspberry pi or orange pi

Hello I really like armbian's 4.x kernel because it doesn't heat up as crazy as 3.x's. I was trying to install Seafile on the Odroid C2 using the instructions here https://forum.seafile.com/t/seafile-server-on-arm64-aarch64-working/1405 However I'm getting the following error ./setup-seafile.sh: line 492: 2045 Illegal instruction (core dumped) LD_LIBRARY_PATH=$SEAFILE_LD_LIBRARY_PATH "${ccnet_init}" -F "${default_conf_dir}" -c "${default_ccnet_conf_dir}" --name "${server_name}" --host "${ip_or_domain}" At first I thought that this was obviously a problem I should find help at at Seafile, but upon further testing I did not e…

I downloaded image from https://www.armbian.com/orange-pi-pc-plus. It marked as STABLE and has kernel 4.14.65. Package linux-image-next-sunxi version 5.59. I'm trying to install kernel headers but in repository no package linux-headers-next-sunxi. And also in repository no package linux-image-next-sunxi (it installed in downloaded image) so it is not possible update other orangepi to latest kernel.

Hi all, We try develop remote controlled plug with Orange Pi Zero r1... We have some problems... We want operation is follow this steps: 1- Powered device... 2- First Start Device is opening with Wifi AP mode (?) 3- Users connect to device with ethernet or Wifi 4- Go to (192.168.1.1) 5- If users want to direct control plugs no problem they are using this page Open/Close plugs. 6- If users want to 'device is connect LAN', they are select LAN selection and if they have wifi, select their wifi SSD and type pwd and click SAVE button or connet with Ethernet. (?) 7- Device is restart and connect to LAN.. 8- They are …

Hi guys, my name is Yawn I recently tried to use vlc and more specificly the RTSP flux, but it return an error when connecting "Vlc is unable to open the MRL ...". This error dont come of my network, I can't ping the server of the rstp stream, on the second hand, it perfectly work on another pc. Well I think it come from armbian . Any suggestion would be appreciated Thanks in advance

Currently I have a Tinkerboard S and due to lack of USB WiFi support (Tinkerboard only has 2.4ghz, but 5ghz is necessary), I need another OS or SBC. Support for CSI camera is also required. I've installed Armbian on TinkerBoard and read a couple of threads on this forum. It looks like there is no CSI support for the Tinkerboard and there is no CSI camera support coming (couldn't get the camera to work on Armbian). The Rockchip on the Tinkerboard has the advantage of H264 encoding and very useful. There are other SBC boards with dual band and Rockchip (different Rockchip than the Tinkerboard), like the RockPi or the RockPro, but I can't really find out if the C…

Hi, My Armbian Debian Buster install has the package "armbian-firmware" installed at version 19.11.3.346. Since a few days/weeks, the package is no longer available on the APT repository. I couldn't find a reference in the documentation/forum about its removal, so I don't know if its absence is intentional or due to a bug. If intentional, I should probably install the regular linux-firmware packages from Debian instead? Or will the armbian-firmware package return? # cat /etc/apt/sources.list.d/armbian.list deb https://apt.armbian.com buster main buster-utils # apt clean # apt update Hit:1 http://ftp.nl.debian.org/debian buster InRelease Hi…

Hello. I feel like this is a really basic stupid question, but for the life of me I can't find an answer. Every thread that I read about getting a display XYZ to work in Armbian references using fbtft. But apparently fbtft is now deprecated and cannot be used anymore. So.. what do I do now? I'm mainly looking to get ILI9341 -based 3.2" TFT and MPI3508 3.5" TFT to work with Armbian. Mainly testing with an Orange Pi Lite2 and Orange Pi 3 currently. I've read this: downloaded, compiled and installed the .dts. Also modified/added line to boot.cmd to use lcd as display according to https://docs.armbian.com/Hardware_Allwinner/ tha…

I'm trying to enable SATA support on my Clearfog Base that has an eMMC that I boot from. Had a lot of trouble getting the kwboot version that would work and get initial UART boot working with the correct 01001 DIP switch setting. But now it is working with Buster and I have a MSATA SSD that I would like to add for additional storage. In theory all I should need to do is rename the patch for sata0 : mv 'patch/u-boot/u-boot-clearfog/clearfog-pci0=msata.patch.disabled' 'patch/u-boot/u-boot-clearfog/clearfog-pci0=msata.patch' Then build it using: ./compile.sh BOARD=clearfogbase BRANCH=current BUILD_MINIMAL=no BUILD_DESKTOP=no KERNEL_…

Hi guys, I've been trying to build Armbian with an encrypted rootfs, but I can't get it work... If I build Armbian with the following build options it works fine: sudo ./compile.sh \ BOARD=odroidxu4 \ BRANCH=current \ RELEASE=buster \ BUILD_MINIMAL=no \ BUILD_DESKTOP=no \ KERNEL_ONLY=no \ KERNEL_CONFIGURE=no \ COMPRESS_OUTPUTIMAGE=sha,gpg,img But if I build Armbian with these build options (as above but including the CRYPTROOT options) it doesn't work: sudo ./compile.sh \ BOARD=odroidxu4 \ BRANCH=current \ RELEASE=buster \ BUILD_MINIMAL=no \ BUILD_DESKTOP=no \ KERNEL_ONLY=no \ KERN…

Good afternoon, I run Armbian bullseye on my orangepi zeroplus2-h3. My wifi hotspot causes the OS to reboot sometimes, with the error "xradio WSM-ERR: bh error!>>> 0x0012 (16)" I use the NetworkManager conf files below for my wifi hotspot. echo """ [connection] id=mywifi uuid=58356325-7da4-4d1d-ad6b-54f33bfee335 type=wifi autoconnect=false interface-name=wlan0 permissions= [wifi] band=bg mac-address-blacklist= mode=ap ssid=IQLINK-1 [wifi-security] key-mgmt=wpa-psk psk=123456789 [ipv4] address1=192.168.43.1/24 dns-prior…

the jack audio on my Orange Pi 3 LTS is very noisy... my setup description below anyone having the same issue and fixed it? or anyone that went with a USB audio adapter or a HDMI adapter? thanks for sharing ___________________ this is my setup ORANGE PI 3 LTS headless Linux 6.1.53-current-sunxi64 #1 SMP Wed Sep 13 07:43:05 UTC 2023 aarch64 aarch64 aarch64 GNU/Linux Distributor ID: Ubuntu Description: Ubuntu 22.04.3 LTS Release: 22.04 Codename: jammy I'm using alsa and everything plays fine when using bluetooth **** List of PLAYBACK Hardware Devices **** card 0: ac200audio [ac200…

Good afternoon. I install Armbian on OrangePi_+2 and OrangePi_PC. I have a problem: on OrangePi_+2 and OrangePi_PC not set static_IP to Wicd_Network_Manager for Ethernet, but for WiFi static_IP installed. Question: how to replace Wicd_Network_Manager old Network_Manager. I need it to work with multiple networks. I tried to remove wicd and install network-manager, but had a terrible problem with rights. For earlier grateful.

Hi, Have Arduino (microcontroller) clone with CH340 USB/UART (USB serial port). Does armbian support it? regards Peter

I have a raspberry pi camera attached to the tinkerboard. Unfortunately, I have no idea how to use it. Help?

How can I setup my banana pi M2 H2+ ARMBIAN 5.41 user-built Ubuntu 16.04.5 LTS 3.4.113-sun8i camera module I set this command "sudo modprobe sunxi_csi1" and returned: "modprobe: FATAL: Module sunxi_csi1 not found in directory /lib/modules/3.4.113-sun8i" I Don't see /dev/video0 Can I confirm and setup my camera module?

Hey guys, I see the HDMI audio is not supported in the status matrix. Do you know what is missing exactly? I read it predepends on DRM driver, do you know which part is missing? I read in #linux-sunxi IRC history that there are some patches for HDMI audio for H3 H6 H64. What about A20 ? Is there any patches available?

I downloaded the Armbian Buster image from the downloads section of armbian.com and flashed the image to an sd card, as instructed. I have installed sddm, gnome, etc in addition to running apt update & apt upgrade and creating a new user. The system looks good and I planned on using nand-sata-install to write the OS to my emmc .. according to everything I have found, executing nand-sata-install from the root prompt gives a screen that has 3 choices, one of which is "Boot from emmc; system on emmc" Instead, this is what I get: 1 Boot from SD - system on SATA, eMMC or NVMe 5 Install/Update the Bootloader on SD/eMMC I just wa…

Hello, I am running a Cubietruck with Armbian 21.08 Buster. I wonder if this can be upgraded to 22.02. The usual apt update apt upgrade apt dist-upgrade does not install any new packages. However I see e.g. the deb files for the kernel are existing in http://mirrors.dotsrc.org/armbian-apt/pool/main/l/linux-5.15.25-sunxi/ and also http://mirrors.dotsrc.org/armbian-apt/dists/buster/main/binary-armhf/Packages contains the new packages. The kernel is NOT set to freeze in armbian-config. Also that tool does not offer the new 20.02 packages. I seem to overlook something here. What prevents the installation (my apt skill are obviously limited...). …

Hello, I want to transfer .img files to bananapi. These weight gigabytes. I notice the eth0 interface was wrongly set up to 100Mbp/s I used ethtool to set it up correctly pi@Liberty:~$ sudo ethtool eth0 | grep -i speed Speed: 100Mb/s sudo ethtool -s eth0 autoneg on speed 1000 duplex full pi@Liberty:~$ sudo ethtool eth0 | grep -i speed Speed: 1000Mb/s Now I thought the sftp limitation of 1Mb/s was over, it is not. Are there ucap / bandwith limitation settings in Armbian? if so how to remove it? Thanks, SoSie

I have owned numerous Raspberry Pi boards over the years, and I have always have ran Kodi on one of them. For years I have been wanting to upgrade my RPi 3 as it cannot play any of my H.265/HEVC videos. With all the shortages, and how old the Raspberry Pi 4 is getting, I made a rather spontaneous purchase for this Orange Pi 4 LTS board. Getting it all setup is easy enough, but of course, the video (even with H.264!) nearly maxes all 6 cores and the video is chunky as it's just doing everything without any video acceleration. Even navigating the menu seems slow and delayed. I have been scouring these forums and other sources for about 12 hours now, and I am sti…

Hello. I use jammy ambrian on my odroid c2. In this is a 64gb sdcard. 60% of the card is empty. Can i create a automatically backup on the card? It would be nice to restore the fullsystem if something go wrong and the system crah. At this time i crate all 4 weeks a full sd backup on my other computer. but it need a long time, because the full 64gb will be safe as a .img file, which i can restore. Is there a solution to get a smaller zip file, withe the full system???? Thank you a lot. If the fully system zip is not to great, i can upload it on my cloud..

Hello, I have a lidar scanner, which I already made it work with a USB-TTL serial adapter... with a decoding python program... it works great However, I tried to use one of the serial ports in the pins of my orange Pi zero... UART1, in pins PG6,PG7... I have strange behavior When I test the serial port with picocom or screen, I see the flow of characters: picocom -b 230400 /dev/ttyS1 screen /dev/ttyS1 230400 However, my python program fails to read at the first character. With the python's own miniterm, I get the same error Spoiler roberto@orangepizero:~$ python3 -m serial.tools.mi…

Greetings all; I have a pile of bananapi-m5's, all used behind a home.arpa local network. I am the only one here, and no one but me will ever have access to these machines. So I need full access from any other machine on my local network. I updated one that I am slowly configuring to drive a bigger enter5+ 3d printer. New mobo in the rinter so I am starting from square one. Using klipper and mainsail as web interfaces to klipper. Now it goes to a no screen condition at about the time it used to bring up the login requester, but I can still access it via ssh -X me & my pw., but don't have full access cuz x or whatever is not…

Hey all... Looking to put something a LOT more lightweight than RaspiOS (and not-modern-desktoppy at all, please) on my Pi4Bs. Found out about armbian from the Wikipedia page and downloaded the Jammy CLI image, but I can't get either gitlab or github to talk to me for downloading either of the recommended imagers; gitlab just gives me a blank page (no HTMl at all, per Firefox "view source") and github outright refuses connections. If it's important I do not have accounts on either system, and am loath to create same, although I could if necessary. I don't have Internet at home so I'm doing this from a Win10 PC at my public library; it's running t…

Hello everyone, I’m a complete beginner and have very little programming knowledge. However, I decided to build a MagicMirror as a project. For this, I got a BananaPi M2 Berry and installed what I believe is an Armbian operating system on it. Then I downloaded the corresponding packages for the MagicMirror from GitHub. Everything worked so far—though it was quite challenging—and I even managed to personalize each module. But now I have two problems: I want the MagicMirror to stay in portrait mode permanently. However, after a while (about 30 minutes), the screen automatically switches back to landscape mode and opens a new window of the “Display” appli…

hello, i have a Pine A64 and i have a problem with audio since i installed pulseaudio, i have no audio output and all audio devices are lost and the mouse cursor blinks(g every 0.5 second when i move the mouse

Greetings! My first foray into Armbian. Apparently the Link Star H68K is hardware equivalent to the Hinlink H68K. I'm trying to install one of the community supported Armbian images (Debian Trixie, Ubuntu 26.04) for the Hinlink onto a Link Star H68K, using the RKDevTool from the Seeed Studio wiki. And failing. The only image that loads into RKDevTool is the Lubuntu 20.04 from the Seeed Studio wiki. It's just a tad out of date. Any pointers on getting a more up-to-date OS installed would be most welcome. AFAIK my device is OG, not V2. I've also tried booting from TF card, but the device refuses to boot at all wit…

Hello, I am runnign armbian 5.05 jessie server on an OrangePi One. I wish to test network audio streams so I installed pulseaudio to do some tests. As long as ALSA works fine with HDMI output, I thought that pulseaudio would work the same, but I was wrong. The basic pulseaudio installation (apt-get install pulseaudio) turned to be a non effective way to obtain pulseaudio support. Actually this is strange because if I set the default pulseaudio sink to analog audio, it works fine (I get no sound but just because the Opi One has no analog connector). When I set the default sink to hdmi audio, I get indiscernible short discharges instead of music and pulseaudio…

Hello! I was very happy, when the first OrangePI came out and had HDMI and VGA output. With this device it was possible to use the board with two monitors (mirror desktop and expand desktop) I use this board as thin-client in our office - connecting to windows server via rdesktop. Another way we use the boared is working with one monitor via rdesktop and running with the other Monitor or TV-Set a webpage witch is displaying infos. It is running perfect and we can save money because there is very low energy consumation and the OPIs are cheap. I think this kind of using the OPI wourd have good future. Now this board is no more availabe. I am not a tec…

I just want to share what I examined yesterday... Background: I used OPi one to output HDMI video when a button is pressed. It has an attached fan, a remote shutdown button and a remote switch to turn power off-on (OPi is hidden and operated through these buttons). It worked on breadboard, produced 2 working examples, tested the first two with a 24h test. All fine... Problem: On a third installation after the "circuits" are built, I made a last test. HDMI output had problems Sound comes and goes with a hick-up... Debugging: Checked wiring, checked with other video, checked with other OPi etc. Nada... The problem persiste…

Hi all! I just interested, what it is sunxi-CODEC and what's the difference between sunxi-sndi2s? card 0: sunxicodec [sunxi-CODEC], device 0: M1 PCM [sunxi PCM] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: sunxisndi2s [sunxi-sndi2s], device 0: SUNXI-I2S sndi2s-0 [] Subdevices: 1/1 Subdevice #0: subdevice #0 Regards, Alex

Hello, I'm looking for a recommendation about a SBC capable of: manage 2 x HGST HTS721010A9E630 (HDD 2,5", 1 TB) offer Gigabit ethernet connection I saw different threads where a mPCI SATA card is used (e.g. https://forum.armbian.com/topic/4845-marvell-based-4-ports-mpci-sata-30/), I don't know if there is a better option. Thanks for any tip, -f

A while back, I noticed that Armbian was compatible with this Ugreen GbE adapter. As I purchase on eBay rather than Amazon, I found the above one plus this adapter, which has the same AX88179 chipset plus a built-in 3-port USB3-Hub. So I decided to try it and see if it worked with Armbian and report back here. (I'm using the EspressoBIN for this and Ubuntu Bionic 4.19.56). These are my results: Straight out-of-the-box, I can see it using LSUSB, but it does not plug-and-play-work. After struggling and attempting to get the network manager to do something about it, I added this line to /etc/udev/rules.d/70-persistent-net.rules: SUBSY…

The devil is in the details. Armbian was partially working so I started over to study the process more closely ! It seems Geek Buying is NOT the same Wifi as WiFi Chip: RTL8189 on Gear Best in the X96 Mini. iComm SV8051P is not working with Linux and actually not very good on Android 7.1.2 as delivered. HDMI Audio on 5.4 is WIP as Linux Meson discloses.

I was reading about hecking the filesystem / Seems the way is: touch /forcefsck But this action does not fix, so we need 'somewhere': fsck.repair=yes How do i have to do it? Thanks. รวยเร็ว

Hi, I have edimax ac600 usb wifi dongle which uses 88XXau driver. I have a problem that after couple of hours/days wifi stops working. No errors in dmesg, dont have any other logs since after wifi goeas down, journal is flooded with error messages from snapclient and older logs are lost. After connecting trough ethernet I cannot see any issues with he wifi accept that it does not see any networks, iwlist scan gives no results. rfkill is disabled. Reloading the 88XXau driver makes iwlist scan return some results but still cannot connect to my router. only restart of the board helps. What can I do more to debug this issue ? any help please. cheers, M…

If you encounter this error install usb-modeswitch and reboot. sudo apt install usb-modeswitch sudo reboot

Hi, I have this great tiny SBC without being used because I could not get its fan temperature dependent on dietpi and really did not liked the stock image, so I have been looking for something more interesting. After installing lm-sensors, I ran sensors-detect as root and no sensors were found. I know I saw a temperature readout (calculated?) somewhere and I wonder if whether is possible to have a PWM control of the fan as the stock image does. All help and suggestions are much appreciated. Cheers, Gus

Attempted to work with both latest Bullseye and Focal images for OrangePi R1 but in both instances got the following message: E: Failed to fetch https://xogium.performanceservers.nl/apt/pool/focal-utils/w/wpa/hostapd_2.10-6~armbian22.02.3+1_armhf.deb Certificate verification failed: The certificate is NOT trusted. The certificate chain uses expired certificate. Could not handshake: Error in the certificate verification. [IP: 104.36.81.15 443] E: Unable to fetch some archives, maybe run apt-get update or try with --fix-missing? Pasted here (duplicate of above) as well valid 90d. http://paste.debian.net/plain/1238152

Hi, I am unable to build any images for orangepi SOCs specifically orangepilite, orangepilite2 and one plus. Always returned error halfeway. Following is a sample of log when I compile image for orange pi lite. Please me some guidance on how to resolve this. My steps: run sudo compile.sh -- "Do no tchnage the kernel..." --> "orangepilite"--> either current or legacy --> either "buster" -->"Image with console inter..." -->"Standard image with ..."compilation.log

Hi, Trying to build a full installation for an Orange Pi One. Building on a DigitalOcean ubuntu 15.10x64 host with 20Gb free disk where apt-get update has been run. I followed the instructions here: https://github.com/igorpecovnik/lib The build fails with Installing Armbian on top of Debian Jessie base system ... bridge-utils Installation of package failed. Screenshot: http://screencast.com/t/uDyMUyPMSnVL What am I doing wrong? The reason I am trying to do this is because I would like to create a custom Armbian where the wpa_supplicant.conf is preloaded with my home wifi information, so I can just boot these cards headlessly and they'll…

hello guys !!! I want to make a backup of my sd card with armbian and other installed on it . In windows not possible because the ext3-4 format of the card . In ubuntu I can see the armbian file system into the card but not copy because I don't have permission So , I put again the card into my orange pi and I type sudo su and then password . I tyoe also sudo -s but nothing . Pratically some folders are not "visible" Do you have any suggestion? ciao Walter

Is it possible to change the baud rate of the i2c driver on twi0? It seems to be running slower than twi1 and twi2 at least probing that bus takes much longer. Also are twi1 and 2 routed out somehwere on the Nanopi NEO I don't see where the pinout is documented.

Could someone remind me of the status of the H3 crypto engine, both hardware (capabilities, aes-ni ?) and software (mainline or vanilla kernels) ? I've been testing openvpn on an amlogic s905 box (still need to fix my beelink x2 problems) and as expected i'm hitting a cpu bottleneck. i've been able to achieve around 60Mbps (Blowfish-cbc, usb hdd, ext4) but openvpn being single threaded the cpu load maxes out thus limiting openvpn's bandwidth. Unfortunately as with most vpn providers you can't tweak all parameters and so, changing the tun-mtu size is not possible and has to stay at the default 1500 value. I will perform some tests on my beelink x2 or opi pc…

Hi, there is something wrong with the configuration of your server. If I try to connect to http://armbian.com/I get the nginx wellcome page. You have to forward the traffic to www.armbian.com

Hi! I'm testing some orange pi device for use it on my projects as a substitute for raspberrypi. I need a device with OS installed on emmc. I have not had good experiences with microsd on raspberrypi due to data corruption. I thought that orangepi device with emmc flash was a good option. However I'm realizing that it is not as compatible as I thought. Make the spi display and spi smart reader work I think that's crazy. For this reason I ask you the following: Whitch device is most compatible with raspberry pi at gpios level? If had emmc or something more robust then microsd it would be better. thanks in advence

Hi , My son purchased a PCdunio v3, wifi enabled with his birthday money with the grand plan of "coding". This idea is slowly going down the drain. It is using Ubuntu 3.4.79+ It does not detect any wifi or ethernet. I have confirmed that both interfaces are up. I have tried with and without the SD card. I confirmed the router is not blocking the device. I can see that the State of wlan0 is unmanaged, but cant figure out how to fix that. I have tried manually creating entries for the network but this was unsuccessful. When it does try to connect to Wired Network, it simply got stuck looking for an IP address and never amounted to anything (Nothing in the ro…

Hi can anyone help. I've got CSF firewall running on my Helios4 and I keep getting emails saying that rsyslog isn't running. I checked the logs and it seems stuck at this error: liblogging-stdlog[10738]: action 'action 11' suspended, next retry is Sun Mar 11 15:36:43 2018 [v8.24.0 try http://www.rsyslog.com/e/2007 ] Is there any fix for this? Thanks for any help

Hello everyone, I am currently experiencing a network configuration problem. This concerns a project based on an ODROID C2 board with a Linux Debian 9 stretch 5.73 / Kernel 3.16.57 the board is equipped with a USB 3.0 hub + RJ45 powered. The ultimate goal is to have the WAN on eth0 in DHCP (odroid LAN) an eth1 LAN in static (HUB LAN) A wifi key RALINK RT5572 in access point with a static ip, hosting the bridge of the eth0 if necessary. What works so far: Everything is "ok" on boot, however it was necessary to disable some services at startup, and some behavior is strange: Services disabled: Wpasupplicant (disabled and hidden) otherwise impossibl…

Hello, I have a Quectel EC25 modem which works fine on OPi Zero Plus and other boards, now I'm trying it in an OPi Zero Plus 2 H5 board, it loads the network interface but it doesn't gets good internet, some IPs respond but most others(google.com por example) don't. I'm wondering if there is any drivers or incompatibility issue. Any help will be welcome. Thanks in advance, Alejandro Edit: In this images I show: 1- the ppp0 network interface 2- the lsusb command which shows the modem 3- A ping that works and a ping that doesn't 4- The logs loading the OS, it freezes on the last line

the last weeks I did read about some SBCs not having a ethernet-connection after update. This time I got this with update from 5.10.3-dev to 5.10.4-dev with armbian buster I had the Network-Manager deinstalled and did see my IP which I did configure via /etc/networks but couldnt arrive the K1Plus via ssh/ping and when I used a TTL-RS232 on the K1Plus I cant ping anything in my network or the internet. But dmesg did say the networkport eth0 is up (yellow and green led are also did "work") dwmac-sun8i 1c30000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx To switch back to a older kernel I had to configure wlan0, but eth0…

I've got one of these boards. It is just Kernel development that has ceased as there are no maintainers? (Had I had the skills, I would have happily maintained it. ;-( ) Also, to get the latest Kernel later on, is it as simple as obtaining the official sources and then compiling (or cross-compiling to ARM) and then install the Kernel? On this one I'm a bit like a duck out of water and if anyone can point me along the right path, all help will be greatly appreciated.

Hello I'm just wondering that there are two release files in /etc and why they have different VERSION values. In armbian-image-release file, VERSION is 20.08.1 But it is 21.08.8 in armbian-relase file. armbian-config and welcome massages also show version as 21.08.8 So I think 21.08.8 is correct one, but then why armbian-image-release has incorrect version value? Is it a bug? Or am I missing something? Please help me. Thank you.

The internet is full of reports, that USB devices get disconnected at random after some time. Camera or disc-drives, keyboards etc. For me it was a GPS device. The solution is described here https://hamwaves.com/usb.autosuspend/en/ and here https://www.kernel.org/doc/Documentation/usb/power-management.txt

I'm installed Armbian_23.02.2_Orangepi5_jammy_legacy_5.10.110_xfce_desktop to Orange Pi5. I have attached external RTC module with DS3231 on I2C5 (/dev/i2c-5) and try it. https://forum.armbian.com/topic/7349-rtc-ds3231-how-to-install-tinker-board-stretch-414/#comment-56094 (Instead of I2C-0, it was I2C-5.) However, the DS3231 does not recognize it. I type i2cdetect -y 5, it remains at 68 without becoming a UU. Is there any solution?

I just installed the official Armbian desktop image on my Orange Pi RV2. When I check with top or cat /proc/cpuinfo, the CPU frequency is stuck at 1.0 GHz all the time. How can I make it actually reach the full 1.5 GHz? Do I need to change some config file or install extra drivers?

As of 25 April, one year after the release of Debian 8, alias "Jessie", and nearly three years after the release of Debian 7, alias "Wheezy", regular security support for Wheezy comes to an end. The Debian Long Term Support (LTS) Team will take over security support. https://www.debian.org/News/2016/20160425 Important: Wheezy-LTS only supports i386 and amd64. The support for armel and armhf is waiting for confirmation from all related Debian Teams. Users of other architectures are encouraged to upgrade to Debian 8 ("Jessie").

Hy all! I have ona big problem. I use armbian 5.24(ubuntu 16.04.2 lts) on pi pc, install transmission torrent from terminal line( sudo apt-get install transmission*), install success, run transmission, set up(download dir,port etc), working fine. Restart app, and "oh-oh" transmission not saved modified settings and lose downloaded torrent file, download list is empty, all settings back to default... I read many guide fix this problem. Not working permission change, not work group change, not work reinstall, not work daemon manual settings, apps not read/save config file... Idea?

I just attempted several builds of Build-Armbian, 5.67 bionic 5.0 rc1 with S9xxx board. None of them will boot. It's almost like it's not reading the DTB right. It just sits at the MXQPro logo screen. I've edited to extlinux.conf and the uEnv.ini and even created a dtb.img but it doesn't seem to make a difference. I've used this same dtb with builds produced by balbes150 and it worked fine. I'm a noob, but I'm not just trying to get this running. I plan to contribute to the project if possible. I was a software engineer in a past life. Any hints in the right direction would be much appreciated. For instance, is there a way to see the boot console so I can se…

Hello I am running a NanoPi M4 (kernel 4.4) with /boot on SD and / on an USB-attached disk. At the time I ran `nand-sata-install` ext4 seemed like a good choice. I want to snapshot the file system as a preparation step to backing up, so it looks like I have 2 choices now: 1. ext4 on LVM 2. btrfs -> Will 1. work with u-boot/armbian at all? Which solution is recommended? My guess is that btrfs would be the easiest, so the next question is -> can I go and a) `btrfs-convert /` b) update rootfs in armbianEnv.txt, or is there any other step involved? Regards -Patrick

Hello Team, everytime the paket "linux-buster-root-current-bananapi" is updated, i lose my unattended-upgrades conifg. /etc/apt/apt.conf.d/02-armbian-periodic ist set to default /etc/apt/apt.conf.d/50unattended-upgrades is deleted How can i stop it? dpkg -L linux-buster-root-current-bananapi | grep apt /etc/apt /etc/apt/apt.conf.d /etc/apt/apt.conf.d/02-armbian-compress-indexes /etc/apt/apt.conf.d/02-armbian-periodic /etc/apt/apt.conf.d/71-armbian-no-recommends /etc/apt/apt.conf.d/81-armbian-no-languages /usr/lib/armbian/armbian-apt-updates Thank you

I've got an Olimex A20-LIME2 and their 3.4" LCD with touchscreen. While they do work together using their built A20-OLinuXino-buster image, I would much rather use Armbian on this board. I've been attempting to use their lime2-lcd-olinuxino-4.3ts overlay (present commit: af1d92c). What I'm doing is, after cloning that repo to the Lime2, compile all supplied overlays with (because that's quick & easy): make all … then install the same overlay (by name) that works in OLinuXino with: sudo armbian-add-overlay sun7i-a20/A20-OLinuXino-Lime2/lime2-lcd-olinuxino-4.3ts.dts But on reboot, it fails with: Found mainline kernel configuration 47918 b…

Hello, My BananaPI is booting from SSD and everything is working fine. To maintain SSD I want to use the TRIM function weekly. Is this function already implemented and works automatically or do I need to install it via CRON-Job?

Because I have updated to Armbian 22.02 with the linux 5.15.25 kernel and I am using the rk3328-nanopi-r2-rev00 device tree, I thought I should share what I have discovered. 1/ I had trouble setting up a one-wire device (ds18b20 temperature sensor). I think the w1-gpio pin assigned in the supplied overlay is messing up access of the SD card. I found some helpful information from this post: https://forum.pine64.org/showthread.php ... #pid100639 I copied the overlay code, modified it to use GPIO2_A2 (pin 7 on the 26pin header), compiled it and copied the new dtbo file to "/boot/overlay-user/" . Added the "user_overlays=rockchip-w…

Does anybody know who to inform to get them to update the certificate on this repository? https://xogium.performanceservers.nl/apt/

I'd like to run usbdux usb hardware with armbian but have no experience so far in building modules. I compiled the current armbian branch form github. But I could not figure out how to compile the comedi drivers and include it in the kernel. help appreciated Thomas

Hello everyone, First timer here. I enabled the wlan0 interface on my Orange Pi zero 2w and am able to connect to the internet. However, I am not able to connect to it via SSH or even ping it, (cannot resolve host). I'm using the minimal image available here: https://www.armbian.com/orange-pi-zero-2w/ I followed the docs to configure wifi as pointed out here: https://docs.armbian.com/User-Guide_Networking/#connecting-to-wifi-network Currently I'm stuck on how to debug it further. I tried to ping other devices from within the orange pi and it works without any issues. Any advice is very much appreciated

Hi, I was reading for some days and don't know what's is best SBC for recording (maybe orange pi plus 2e @tkaiser). Right now, I have 6 1080p IP cameras recording 5 fps 1024 kbs bit rate in a raspberry pi 2 with raspbian and a edimax 7811 wifi. 3 cameras record over ftp. 3 cameras record by shell scripts using ffmpeg only copy not transcode. I like better bandwidth and if possible hardware decode 1080p for streaming online Videos. Thank you for your time.

I had problems When i tried- To change root password at Boot as asked and the system always halted.i tried différent sd card and goût the sa me issue. What should i do?

I installed aiohttp and lighttpd. Both work on the chromium browser locally. When I port forward them. I can access them with my public ip address. But I can't access them just by typing their local ip in my laptop's browser that is on the same LAN network. So im not really sure what is going one here, something dns related ?

Good morning everyone. I'm unable to connect to a nanopi M1 through ssh, I'm using windows power shell and the network is made with a TP-Link router MR3220, I've looked several guides around there but always is saying "connection reset". I've also checked the IP address wich is allways the same because I used the address reservation feature of the router (of course, there is a fixed MAC address on eth0), when I apply the command ssh -p 22 root@xxx.xxx.xxx.xxx on the uxterm of armbian it shows the shown in the attached image "resulado de usar ssh" and like I said, the answer of power shell is connection reset on port 22 for that server. the ssh_co…

Installed from Armbian_5.65_Odroidxu4_Debian_stretch_next_4.14.78. Used Armbian-Config to install ISPConfig Used ISPConfig to install Joomla Joomla control panel states version is 7.0xxx but requires 7.1 or later - We have detected that your server is using PHP 7.0.30-0+deb9u1 which is obsolete and no longer receives official security updates by its developers. The Joomla! Project recommends upgrading your site to PHP 7.1 or later which will receive security updates at least until 2019-12-01. apt update apt upgrade shows all packages up to date Is there a way to upgrade to 7.1 in this config? all the help I find online is oriented towar…

hello dear all, i am running Armbian on a Banana Pi for more than one month - all goes well No i wanted to do some checks - and i wanted to check the version of the kernel on bash - with /etc/armbian-version but this is only accessible when logged in as superuser At the moment i do not remember the credentials for the super user so i enter su and then a passwd - but i get back "Authentification failure" BTW: with password 1234 i do not succeed. question: What can i do now!?

Hi guys, I am currently working on backing up my armbian installation. Following situation: boot: sd card file system: nfs root backing up the file system is not an issue, there I am using a rsync logic that transfers only changed files, which works great. The problem is with the boot files. In case of sd card failure I need an image that I can quickly restore to a new sd card, without the whole file system, as it is on nfs root and backed up differently. Now my question is: what is the best way to create an image file with only the boot logic? On Raspbian this is simple, as the boot device is a fat32 partition, but on …

Hi! I powered off my tvbox directy by power cord, and after boot can not enter in Xorg anymore, the screen go to black like successful Xorg start and back to console (each try delay 1s - slow blinking) and repeat this process ininterruptly. Maybe related to lightdm? How to start in console mode to try to fix it? This already happen with two different tv boxes (with buster and now with bullseye).

I want to read and burn DVDs, but the devices won't show up in Xfce Thunar. Other USB devices show up. Has optical drive support been deleted in Armbian?

Trying to set frequencies and governor for both types of CPUs on this processor. armbian-config sets the max freq and governor correctly for the two big proccesors but no config for little. Tried cpufreq-set for little, but it does not respect governor. If its set to a freq is stays there indefinitely, and if conservative governor is set the max freq goes back to 1.5. How do we set max freq to 1.2 for little, and governor to conservative and have both stick like big does with armbian-config?

I am working on getting the MCP251x device running in mainline. So far the SPI and other entries in the device tree are fine. However when I bring the bus up it fails to acquire the interrupt. I think the way I am defining the interupt is incorrect. I had this working in 4.4 so i know the hardware is functioning correctly. Does anyone know how to properly define the interupt and interupt parent in this case? spi1: spi@ff1d0000 { compatible = "rockchip,rk3399-spi", "rockchip,rk3066-spi"; reg = <0x0 0xff1d0000 0x0 0x1000>; clocks = <&cru SCLK_SPI1>, <&cru PCLK_SPI1>; …

Hello, My nanopc t4 device is not booting.i tried all different ways(eflasher method,usb-type c method and boot from SD card method). but output is same. UART debug shows below output every time. as well as recovery key is not working as expected. how ever maskrom mode can be enabled with holding the boot key while turn on the the SBC. Can anyone plz suggest a solution? DDR Version 1.24 20191016 In Channel 0: LPDDR3, 800MHz CS = 0 MR0=0x58 MR1=0x58 MR2=0x58 MR3=0x58 MR4=0x3 MR5=0x1 MR6=0x6 MR7=0x0 MR8=0x1F MR9=0x1F MR10=0x1F MR11=0x1F MR12=0x1F MR13=0x1F MR14=0x1F MR15=0x1F MR16=0x1F CS = 1 MR0=0x58 MR1=…

Hi All, I am a total newbie in orange pi and ambian. I just want to use orange pi one as my pi hole server. i use sandisk ultra pro 32G a a huawei 2A power block using usb to barrel connector. After my first install, and try to ssh, the port 22 timed out in armbian I also tried reflashing to debian, and still cannot ssh. I already tried some suggestion i found like dpkg-reconfigure openssh-server, changing time out of ssh. i tried armbianmonitor -u, but im getting a Network/Firewall problem detected. you think this might be related to ssh connection. thanks!

Is it possible to install armbian using dd? I see the instructions say to use USBImager is recommended. However, my situation is that the computer I am using is an ARM64 running Linux, and it appears there is not a binary download of USBImager available for ARM64-linux. I could compile my own copy of USBImager, but it seems like it might be simpler to use dd. Or--is there an alternative to USBImager that I could install on my ARM64-linux (debian), preferably using the package manager?

Windows wont let me edit/access the SD card once the iso has been written to it. Any help?

A new 4xA53 Amlogic S905 board from FriendlyArm. -> http://www.friendlyarm.com/index.php?route=product/product&path=69&product_id=186 Really interesting.

Dear colleagues! I think many of us are trying to use SBC boards with Armbian as server, control units etc. How do you handle instant power OFF, due to power loss, for example. I am thinking about small UPS development, it will contain battery for 30 seconds of Orange Pi Pc+ operation and set Orange Pi I/O as signal for correct shutdown. But is it actually needed? I keep switching my Orange power OFF from AC adapter instead of shutting down for 1 year and still no problem there.

Hi! I am having a really weird issue today with my armbian system. Its default configuration is as an AP with a NGINX server running at boot so that I can connect to my board and access to a website stored locally. I wanted to do some updates to the systems, so I have switched off the board, and opened the SDcard to my debian desktop system. I have modified the autoconnect value of my AP nmconnection file to false and switched the one of my infrastructure mode nmconnection file to true, so that at next boot, my board connects to my local network and I can run my updates. my board has never shown up in my router l…

I know it sounds crazy. But at least every 1 out 3 reboots, the sbc will shutdown instead (no hdmi output) and not boot back up. Rebooting in terminal whether remotely or locally will have the same effect. And when it fails to reboot and just shuts down instead, my linksys router (ea9500) disconnects the internet (devices still connected to router). I have to power cycle the router to get it working again. This occurred on a fresh installation of the current focal releases. I would say I had to restart my router at least 15 times in the past few hours, and every time it happened was when the reboot command failed. The sbc is connected via ethernet, and the internet…

Hello folks, I plan to build a power bank or a ups for my Orange Pi Pc H3. Here is the log dump for more info: http://ix.io/2kMo I have been using my Pi PC as a full fledged desktop thanks to all you Armbian contributers. We have occassional power outages and to counter the issue I'm planning to build an alternate power source. After some online search I found that some of the IOT boards support usb power banks as a power supply, hence would like to know if Pi PC H3 supports this feature or can be programmed? Another option is to use a MoPi board, not sure if Pi PC H3 supports the board. https://pi.gate.ac.uk/pa…

Hello Unfortunately my OrangePi PC which I used for couple of years failed and I'm looking to buy the 64-bit SBC from Pine64. Funny thing about my OrangePi PC was that there was one and only one old Armbian image version (Armbian-20.05.4-Orangepipc-focal-5.4.45.img) which ran GUI successfully out of the many other Armbian and OrangePi images I tried which helped me run it as a desktop for using Libre office and others. Unfortunately 1GB RAM was too low for Gaming lol. Thanks to the Armbian community for that. Before buying, I presume the PineA64 LTS version has a 64bit Rambus if not - I don't understand how processing speed will be bett…

OrangePi 4, Question in subject as I found at least 3: - https://github.com/morrownr/88x2bu - https://github.com/fastoe/RTL8812BU - # REALTEK RTL88x2B USB Linux Driver **Current Driver Version**: 5.13.1 **Support Kernel**: 2.6.24 ~ 5.17 (with unofficial patches) (forgot URL). On Armbian system "automagically" configures card after inserting, can configure as AP, only iwconfig shows as follow: wlxb44bd62f536b IEEE 802.11bgn ESSID:"ARMBIAN" Nickname:"<WIFI@REALTEK>" Mode:Master Frequency:5.2 GHz Access Point: B4:4B:D6:2F:53:6B Bit Rate:300 Mb/s Sensitivity:0/0 Retry:off R…

Hi, I need linux headers included in the distribution to install a given software because it requires a kernel modification. It seems that some distributions contain linux headers and some do not. Is there a way to determine whether a distribution has those headers other than installing and trying it out. I have an Orange pi + 2. cheers Martin

I have been trying to get a 7" waveshare touchscreen to work with the orange pi zero2. I've checked that the touchscreen isn't faulty by using with a raspberry pi. I also checked that the output from the orange pi is working by using my computer monitor. It just doesn't want to output to the touchscreen (hdmi).There seems to be some thin grey horizontal lines. I do get a flicker at startup of the orange pi, but that is about it. Any idea's? I'm new to armbian, so if you have an idea, please list me some steps or point me to some documentation to help. I appreciate the help.

Hey everyone, I'm a noob in SBCs in general but I recently bought an Orange Pi One along with a 3.5inch HDMI-compatible MPI3508 display to work with it. Right now, I still can't seem to make the tft display work with the board but after some hours, I came across a thread that led me to this DTC overlay that I can use for my display. (https://github.com/jonathan-gatard/ili9486-xpt2046) I tried to download the .dtc file and compiled it as instructed in the README file, but `armbian-add-overlay ...` gives me an error: Error: dtc does not support compiling overlays I tried updating my dtc to the latest version like other users recommended but it still didn…