Beginners

hello, i want to install armbran on my mekotronics mini pc. Does anyone have a solution! Thanks (no sd)

Hallo, Ich habe noch ein Tinkerboard rumfliegen, welches für Office-Anwendungen reichen sollte. Ich suche jetzt schon seit einiger Zeit ein OS dafür, bisher habe ich leider aber noch nichts derartiges gefunden. Vielleicht kennt ja jemand ein entsprechendes Image oder hat Tips wie ich es selbst erstellen könnte Ich bin allerdings bestenfalls Beginner mt Debian- Schon mal vielen Dank

Hi, I'm trying to use ZFS but the kernel I'd like to use doesn't support loadable modules. The version is 22.08.4 at the moment (5.10.147) Can I use zfs-dkms on linux-image-current-meson64? And I'm curious why loadable modules are not supported by default for linux-image-current-meson64, is it same with every model? or probably Odroid-HC4 is one of the models in which loadable modules are not build by default? System diagnosis information: https://paste.armbian.com/ezisijedob Thank you, Gunwoo Gim

HI, I am hoing someone can help. I cannot seem to get UART1 working on Orange Pi1. Uart2 and Uart3 are working just fine. Everything indicates that the port is enables on the module but there is no actual data being sent out of PINs 38 and 40. Verifying that the port is enabled root@orangepione:~# dmesg | grep tty [ 0.000000] Kernel command line: root=UUID=1d571c77-01ce-4f06-a2dd-23d24e7835b0 rootwait rootfstype=ext4 console=ttyS0,115200 console=tty1 hdmi.audio=EDID:0 disp.screen0_output_mode=1920x1080p60 consoleblank=0 loglevel=1 ubootpart=2e9b222d-01 ubootsource=mmc usb-storage.quirks=0x2537:0x1066:u,0x2537:0x1068:u sunxi_ve_me…

on orange_pi pc plus i run nand-sata-install and after progress is 100% i see this error cp: error writing '/mnt/nand-sata-install.Qdjq7T/bootfs/boot/initrd.img-5.15.74-sunxi': No space left on device cp: error writing '/mnt/nand-sata-install.Qdjq7T/bootfs/boot/armbianEnv.txt': No space left on device cp: error writing '/mnt/nand-sata-install.Qdjq7T/bootfs/boot/armbianEnv.txt~': No space left on device cp: error writing '/mnt/nand-sata-install.Qdjq7T/bootfs/boot/boot.bmp': No space left on device cp: error writing '/mnt/nand-sata-install.Qdjq7T/bootfs/boot/boot.cmd': No space left on device cp: error writing '/mnt/nand-sata-install.Qdjq7T/bootfs/bo…

System: Armbian_22.08.1_Nanopim4v2_bullseye_current_5.15.63.img.xz 4x SATA HAT (https://tinyurl.com/2hovcx2g) OMV6 Problem: Making changes with OMV6 GUI like adding a share folder, sometime syslog report what looks to me like a SATA error. Spinning HDD start 'clicking' (seeking) and file system unmounts Soft reboot does not solve the problem...I have disconnect the power supply and boot again. The NanopiM4V2 and 4xspinning HDD are powered with a lab bench top power supply 12VDC / 15Amp...(just to rule out the power supply side) I am reporting this here since the log reports the SATA error from the Kernel and I don…

i want to build custom armbian image from git clone https://github.com/armbian/build ./compile.sh \ BOARD=orangepipcplus \ BRANCH=current \ BUILD_MINIMAL=yes \ BUILD_DESKTOP=no \ KERNEL_ONLY=no \ KERNEL_CONFIGURE=no \ EXTRAWIFI =yes \ BOOT_LOGO=yes \ COMPRESS_OUTPUTIMAGE=xz how can i disable u-boot message log and kernal log so no log or text will be displayed in hdmi screen i read somewhere that i need to add linux_silent or something like this

im using orange pi with armbian and i try to rotate display by seeting in boot/armbianEvt.txt fbcon=rotate:3 it only rotate the console message. but when i run startx (startx installed via sudo apt-get install --no-install-recommends xserver-xorg x11-xserver-utils xinit openbox ) is still default mode not rotated It makes me angry to know that i have achieved it without any difficulty with a RaspberryPi 3 simply by adding display_rotate = X in /boot/config.txt and that there is no way for Armbian.

root@nanopct4:/home/paco# pulseaudio -check pulseaudio: opción inválida -- 'c' E: [pulseaudio] main.c: Falló al analizar la línea de comando.

i have connected device with hdmi and i dont want logs to be shown on startup i tested adding this code in /boot/armbianEnv.txt but it doesnt work extraargs="console=tty3 silent quiet splash loglevel=0 logo.nologo vt.global_cursor_default=0 plymouth.ignore-serial-consoles consoleblank=0"

The /sbin/armbian-install script that ships in Armbian_22.08.7_Odroidn2_bullseye_current_5.19.17_minimal.img.xz has a couple of faulty lsblk arguments that cause it to exit instead of allowing the user to select the installation target partition. The script works properly after both instances of the string MOUNTPOINTS are changed to MOUNTPOINT which is easily done with sed -ie s/MOUNTPOINTS/MOUNTPOINT/ /sbin/armbian-install

Hello everyone, I am trying to build a custom image of Armbian for the Radxa CM3, but I'm a little confused with how to proceed. I thought if I cloned the repo I could modify a similar board configuration file (such as rock-3a.conf) by renaming a copy as radxa-cm3.conf and changing BOOT_FDT_FILE to use my own device tree, but this is where I got lost. I'm not sure where to put the device tree in the cloned repo so that it gets used during the build process. I'm also not sure if I would need to change BOOTCONFIG as well, and if so where to find the file to modify. Any and all advice to point me in the right direction is appreciated! Thanks! …

does anyone know of a version of armbian that would work on a samsung galaxy book go with a snapdragon 7c gen2? i traid the generic version and it booted to the grub, and then it restarted like all other distros i've tried. i can not find a distro to boot on this dang thing. anyone have any ideas on what to do or try? i've hit a dead end i gotta dig deeper to figure something out, so any thoughts on this would be helpful .. thanks in advance

I am trying to build an old debian stretch image for checking my BananaPi M3 boards. I had it and Jessie running fine for years, but buster is causing issues with soft boot and reboots failing. So wanted to check the boards integrity with stretch. I have tried git checkout -b v20.02 remotes/origin/v20.02 which I thought was around the right time but I am just getting Buster being offered. I am using Ububtu Jammy for building.

I used https://github.com/piter75/armbian-build for building images via vm-kvm for my Orange servers. Now I want compile application hostapd with forcing 40MHz, but I don't want build/compile it on orange pi servers. Is possible use environment armbian-build for building mentioned application? Or some docker container with armbian in which I can mentioned application to compile?

Hello, is there an armbian available for Tinkerboard 2 (RK3399)? Mainly I need to setup a headless system with working i2c, pwm and gpio . Thanks!

No wifi detected on the orange pi zero 2 Same issue as : Hardware is supported. (https://www.armbian.com/orange-pi-zero-2/) Any help is appreciated, if i resolve the issue i will post the solution here. ubuntu@orangepizero2:~$ sudo nmcli device wifi rescan Error: No Wi-Fi device found. ubuntu@orangepizero2:~$ armbianmonitor -U 1 2 ### Activated 1 lzo-rle zram swap devices with 492MB each. 3 ### Activated Armbian ramlog partition with zstd compression 4 5 ### Activated lzo-rle compressed /tmp 6 7 ### Activated 1 lzo-rle zram swap devices with…

I would like to make myself more familiar with the early linx boot process on ARM (u-boot, device trees and co.) and my idea was that I will start tweaking with something which actually works. I tried to figure out how to obtain the source package for u-boot (in my case for linux-u-boot-orangepi3-lts-current) but the armbian package repository seem to contain obly binaries. Any idea wherethe source packages for this binaries are located (e.g. what deb-src line do I need to add to the armbian.list to make "apt-get source" to work)?

Hi, I'm interested in getting a compact ARM-based processor (something like a RPI or ASUS TinkerBoard) that can output a 2560x720 output resolution. The current available documentation seems quite sparce and Google searches are littered with people having problems with establishing their chosen video resolutions so I am sceptical! Any pointers would be gratefully received. Thank You, Dave

Hi! Have limited knowledge in linux, all self learned so bear with me if I sometimes sound like an i**ot in my wording. I have used lots of different Raspberry pi's but since they are near to impossible to get your hands on I figured I'd try out some of the alternate boards. Got myself a nanoPiNeo2, orangePiZero2 and an orangePiPC2 just for the fun of it. I have tried this on the nanoPi and the opiZero2 and run into the same problems, havent even opened the opiPC2 yet but I suspect it will be the same problem on that board. Downloaded armbian for each separate board (instead of debian) because I want to use the same system o…

Hi, I want to make my orange pi 3 lts work in a similar way to the way Wifi manager works on esp8266 projects The idea being that if there is not a valid Wifi connection found then an AP is activated so a user can connect to a captive portal and enter the wifi ssid and password anc click connect. the pi then reboots and tries to connect. if that is successful then it works as normal if it is not then it reactivates the AP. I found various different partial solutions but none of which seem to work well with my setup. this might be either due to the orange pi or Armbian. The most promising i ahve foudn so far is https://github.com/b…

Hello, I'm trying to control a relay (Bigtreetech Relay) by Orange PI 3 with Armbian 22.08.8 Jammy on it: the relay should be active as soon as PI started and deactivated on PI shutdown. As result I got the following device-tree overlay: /dts-v1/; /plugin/; / { compatible = "allwinner,sun50i-h6"; fragment@0 { target = <&r_pio>; __overlay__ { poweroff_pins:poweroff_pins { allwinner,pins = "PL2"; allwinner,function = "gpio_out"; }; }; }; fragment@1 { target-path = "/"; __overlay__ { poweroff: poweroff { compatible = "gpio-poweroff"; gpios = <&pio 11 2 1>; }; }; …

I'm using Banana Pi M2 Zero with Armbian Debian GNU/Linux 10 (Buster). Compiled the image myself with the latest source code using the armbin/build repository. I want to be able to do serial communication on pins 8 and 10. I'm looking for something to appear at /dev/ttyAMA0, so I can communicate with it. I saw some other forum posts which mentioned it'll happen on /dev/ttyS0 , however even that is not happening. The serial communication is working via FTDI (using the USB side connected to the Banana Pi), which indicates there is no problem with the other device. This is what the configuration looks like using "sudo minicom -s". +…

Download section for Orange PI One Plus ( https://www.armbian.com/orange-pi-one-plus/ ) appears to be malformed / cut-off somehow at second image (Jammy XFCE) where content ends after "h" from "SHA hash ..." line. I checked out download sections for few other boards of interest to me and they all appear to be fine 🤔

Hello, I have installed the Armbian image for Rock Pi S (https://www.armbian.com/rockpi-s/) released 19th of October 2022 on my Rock Pi S and it boots fine. However, if I update the linux kernel (using apt-get install linux-dtb-edge-rockchip64 linux-image-edge-rockchip64) this breaks the image and it will be stuck on starting kernel the next time I reboot. These packages are not installed automatically, but are listed as kept back. However, since they break the system they should maybe not be possible to install.

Dear guys, Recently i am trying to install Armbian on orange pi pc plus using Mobaxterm but for some reason after finishing the installation it shows only Armbian-config screen but not the GUI interface. I don't know if I installed it right or wrong. Hope everyone can help me because this is a subject project of mine in university. Thanks so much.

Hi! After update to kernel 5.15.75 via apt upgrade, boot fails. Though I can flash an older image, I would prefer trying to recover existing setup and rollback to a previous kernel. What would be the best approach, ie flash image to usb, boot from usb and what then? I will appreciate any advice. U-Boot 2022.07-armbian (Oct 18 2022 - 07:36:22 +0000)SoC: Rockchip rk3399Reset cause: PORModel: Radxa ROCK Pi 4BDRAM: 3.9 GiBPMIC: RK808Core: 285 devices, 31 uclasses, devicetree: separateMMC: mmc@fe310000: 2, mmc@fe320000: 1, mmc@fe330000: 0Loading Environment from SPIFlash... jedec_spi_nor flash@0: unrecognized JEDEC id bytes: ff, ff, ff*** Warning - spi_flash_pr…

Maybe someone will be interested in it. https://bbs.stationpc.com/forum.php?mod=viewthread&tid=343&extra=page%3D1%26filter%3Dauthor%26orderby%3Dlastpost The uniqueness of this model is in the mechanism of a very simple installation of a standard SATA SSD drive. p.s. According to information from one client who uses this equipment in serious industrial operation - P2 worked without problems for many days with a full load (24\7) in harsh conditions without failures and failures, at the same time, they tried to use R4S, which froze and turned off after 20 hours.

Since 23 hours, 23 views, no reply's. So I have ordered a 4 pack of the latest 4gig bananna pi's, and would like to know: 1. if Armbian will work on them, and 2. If octoprint-1.8.6 can be installed in a python venv so I can get back to work on a room full of 3d FDM printers. off topic, I have been running an apt update at about 8 hour intervals on the rock64's but while error msgs are, or were displayed on the hdmi output, no xserver appears to be start-able, the hdmi display has now gone dark without its declaring a loss of signal so I have to assume it is generating a synch signal of some sort. I can ssh -Y into both f…

Hello Armbian community, I recently purchased a Odroid N2+ board and am trying different OS. I flashed Armbian_22.08.1_Odroidn2_jammy_current_5.10.139.img.xz on eMMC card. The first boot up works fine. I was prompted to set root password, new user credential and locals without any issue. I then used 'armbian-config' to navigate the different settings. In the system security menu, I applied the firmware update (that's what the menu called), I assume it runs apt update && apt upgrade. After completion, it prompts me to reboot. So I did. Then the Armbian cannot boot up anymore. I am using Odroid N2+ headless, so I can only see the board blue led not flashi…

Dear Members, I want to play around with docker on my NanoPI R4S, and while doing that I don't want to kill my micro SD card. For this reason I connected a USB SSD, formatted it with ext4 and mounted it onto /data. Now, I want /var to use /data/var as a bind mount, in order to lessen the burden on the SD card the system is running on. What is the right way to achieve this with Armbian? Thanks! Janos

using latest armbian server Linux bananapim2zero 5.19.15-sunxi #trunk.0071 SMP Sun Oct 16 03:56:45 UTC 2022 armv7l armv7l armv7l GNU/Linux docs from waveshare said to add "dtoverlay=sc16is752-spi1,int_pin=24" to /boot/config.txt for raspbian so i tried adding it to armbianEnv.txt and reboot but on device files or anyrthing, nothing in dmesg and /sys/bus/spi/devices/ is empty what am i doing wrong?

Hello, guys! I would appreciate so much if you could help me develop my project. English isn't my native language(but I can understand very well) and I'm a beginner on Linux world. But I've made some progress so far and I'm really focused on that. I have been searching a lot for more than 20 days about the topics below but I'm really struggling with some issues. MY SETUP: -MXQ PRO 4K- Rockchip RK3228A - Nand Flash 1GB -Armbian_22.02.0-trunk_Rk322x box_focal_legacy_4.4.194_xfce_desktop.img GOAL: -Displaying in full screen my PDF lyrics on stage and switch the pages using a footswitch. GOALS ALREADY REACHED: -Installed Armb…

Not a feature request, I'm just curious about why things are like this. Context around the error message Line 170: tries to enable ACS but CONFIG_ACS disabled 1 errors found in configuration file '/etc/hostapd/hostapd-5.conf' Failed to set up interface with /etc/hostapd/hostapd-5.conf Failed to initialize interface Most relevant part of hostapd-5.conf ... hw_mode=any ... channel=acs_survey ... Probably the root cause of this $ apt source hostapd ... $ grep CONFIG_ACS wpa-2.10/hostapd/defconfig #CONFIG_ACS=y So my question is, why is CONFIG_ACS disabled when having Automatic Channel Selection (ACS) is useful? T…

hello, i struggle to boot linux kernel again in SDCard hummingboard pulse. before this i try to make U-boot in the emmc but failure. i want back to use linux kernel from SDcard again but stuck in this U-boot preview and the problem is ** File not found /boot/dtbs/5.10.72-imx8-sr/imx8mq-hummingboard-pulse.dt* ** File not found /boot/vmlinuz ** in mmc0 and ** File not found /boot/vmlinuz-5.10.72-imx8-sr ** ** File not found /boot/vmlinuz ** in mmc1 this the picture when i try to remote from minicom https://drive.google.com/file/d/15y_Q00i5NHM4h_rmrifiZSVvat8FuJmF/view?usp=sharing

I don't know how to explain this, so I start with my hardware: Two Odroid HC1. I love swapping Kernels, default was 5.4.199 but that was "too old" because I like it bleeding edge. Did upgrade both to 5.17.5 and it works like a charm! Really good performance and some errors from dmesg disappeared too! However the problems did not wait for long: Kernel 5.19.x broke fstrim commands on my SATA drives so I rolled back, everything was good on 5.17.5 again. My logs showed TRIM was supported and running again, cheers! Now to the actual problem at hand and this might be my own doing. I froze the upgrades in armbian-config. Thinking this would prevent upgrading to the n…

$ cvt 3840 2160 # 3840x2160 59.98 Hz (CVT 8.29M9) hsync: 134.18 kHz; pclk: 712.75 MHz Modeline "3840x2160_60.00" 712.75 3840 4160 4576 5312 2160 2163 2168 2237 -hsync +vsync $ xrandr --output HDMI-1 --mode 3840x2160_60.00 xrandr: Configure crtc 0 failed $ xrandr --verbose Screen 0: minimum 320 x 200, current 3840 x 2160, maximum 7680 x 7680 HDMI-1 connected primary 3840x2160+0+0 (0x41) normal (normal left inverted right x axis y axis) 708mm x 399mm ... CRTC: 0 CRTCs: 0 I would like to setup 4k with a PI400. I found https://docs.armbian.com/User-Guide_Fine-Tuning/ and followed the instructions Did I something wrong, or is this simply…

I am trying to get the RS485 Waveshare CAN hat to communicate with the LePotato. I have Klipper and Mainsail installed which for most would be a good stopping point. I am using CANBUS on all of my printer builds and that requires a CAN hat. I am trying to get this working with this board as i can actually buy these boards. I have a few CAN hats working with Raspberry Pis so i know the original process. Does anyone have a good way to get this all working together? Even a point in the right direction would be a help. I did find a post that claimed to be able to do this but actually trying it as posted resulted with no know vendor as an error.

Hi I just installed Armbian Sid Budgie - rolling, and everything was fine. After the normal "apt update" "apt upgrade" and reboot all application icons in the main menu disappeared (only questionmarks left "?" ). How can i recover/restore them? Altering Budgie Desktop Settings "Icon" or "Built-in Theme" didnt help...

Good afternoon! Tell me about the case, please, the post is great, but maybe I'm initially going the wrong way. Initial task: data exchange between a remote server and equipment with a USB interface and CDC RS-232 or HID protocols. Putting a computer / laptop next to it is not an option. I did not find any ready-made solutions, there are only options: 1. Single board computer. Fast, cheap, angry, easy to make a case and PoE power from ready-made components on the market. 2. Arduino - to assemble from prototyping boards is long, difficult and expensive. To develop something of my own - the navel will be untied with my knowledge. 3. Hardware "e…

I am wondering if anyone else has had any success getting Armbian installed on a Banana Pi M5. I'm definitely a noob at this. After thinking the first M5 I tried it on was perhaps defective, but after trying on a second M5 I had the same result, board will not boot and the Green, Blue and Red lights on the board are all solid (not blinking). I'm afraid I may have bricked both boards. I used bpi-copy to flash the on-board emmc and did not receive any errors in the process. I am unable to boot from emmc or sd card at this point. I tried flashing the SD Card with Debian Bullseye and then on another attempt Ubuntu server (both images had worked previously) but to no ava…

Hello everyone! I try to install game library for Python 3 (via pip) PyGame. After downloading package, i get message below: pip install pygame Defaulting to user installation because normal site-packages is not writeable Collecting pygame Downloading pygame-2.1.2.tar.gz (10.1 MB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 10.1/10.1 MB 3.5 MB/s eta 0:00:00 Preparing metadata (setup.py) ... error error: subprocess-exited-with-error × python setup.py egg_info did not run successfully. │ exit code: 1 ╰─> [30 lines of output] WARNING, No "Setup" File Exists, Running "buildconfig/config.py" Using UNIX configuration... …

Texto original em português BR Ola. Tentei gravar uma imagem do armbian para Raspberry Pi num pendrive de 8 gb e testar no Rpi 4 de 2gb que uso exclusivamente para testes e estudo mas o “Raspberry Pi Imager” que tenho no Rpi 4 de 4 gb não permitiu alegando falta de espaço no pendrive. Gravei num SDCard de 16 gb, testei e achei o sistema excelente, então resolvi: 1- Desinstalar alguns aplicativos para diminuir o tamanho. 2- Com consulta na web, usar o comando dd e criar uma nova imagem. 3- Continuando com ajuda da web, diminuir o tamanho da imagem criada anteriormente para eliminar o espaço vazio dessa imagem…

Hello, I'm trying to figure out how to convert the img.xz file into a usable ISO file to boot onto a USB drive. I have no idea, tried using a few converter tools and they don't seem to be doing the job. Anyone know of a way to accomplish this? Thank you.

I have been following a project on git hub and none of the commands work like the project as I have Armbian Focal installed. I need Armbian Bionic with Linux opiz2b 4.19.57-sunxi #5.90 SMP or 4.19.127-sunxi. I realise this is from 2019 and may be too old now to do anything with it. Is it possible to still get this? I can only find minimal versions in the archives that are much newer than this. I have to state here that I am a complete novice at this and so really have no idea what I am doing.

I have an orange pi lite, I want to use the lcd ili9341 TFT 320X240 2.8 Inch touch screen, and by header 34 pin and how the installation connections I don't know I need your help. I be very grateful. The OS is "Armbian_22.08.2_Orangepilite_jammy_current_5.15.69_xfce_desktop" And I'm looking for 2.8 inch LCD setup codes on Armbian for Orange Pi Lite!

Hi, I just started working with orangepI, I bought an orangepi one module. I have a question is there any possibility to disable and enable HDMI display port of orange pI one. Regards, Adnan

Hi, i'd like to know if it's possible to disable the first run wizard (set up of root password, timezone locale etc) via armbian build framework? I have build my own image, and set the parameter DEST_LANG="de_DE.UTF-8" , but still the wizard shows up after flashing and asks me for the locale. Can i do this type of customization in the customize-image.sh? (sorry if that's a too stupid or obvious question). This is my customize-image.sh script (i have truncated it). #!/bin/bash # arguments: $RELEASE $LINUXFAMILY $BOARD $BUILD_DESKTOP # # This is the image customization script # NOTE: It is copied to /tmp directory inside the image # and executed…

I'm running Armbian on an Orange PI zero and I want to change the default ftp port because I have another device on my network that uses ftp and I want to forward the port. FTP seems switched on by default, I didn't install it so I don't know which ftp program it is.

Hello folks, This is my first post to the forum. I cannot seem to get my LCD 2004 to work on my Le Potato AML-S905X-CC I went back and forth a few times in armbian-config to enable/disable various items, but as it stands right now, I just have i2cA enabled. The address of my LCD 2004 is at hex 0x27, and I am using GPIO pins 3 & 5 for SDA and SCL respectively, but it doesn't show up in i2cdetect -y 0: root@lepotato:~# i2cdetect -y 0 0 1 2 3 4 5 6 7 8 9 a b c d e f 00: -- -- -- -- -- -- -- -- 10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -…

On Armbian Buster, rockchip (rock64), kernel 5.16.69. This was also happening on the latest backported version of 5.10, I think 5.10.72? I tried upgrading to fix it to no avail. I have a couple 8TB HDDs that I use as backups. All I did was reformat one of them as btrfs and start copying the data back over from the other (still EXT4). I tried rsync and simple cp. Without fail, a few minutes into the operation, the copy operation will hang indefinitely, and all open terminals receive these kernel messages: Message from syslogd@localhost at Oct 1 16:59:57 ... kernel:[ 339.539365] Internal error: Oops: 96000004 [#1] PREEMPT SMP Message from syslogd@localho…

As the title suggests I would like to know, if it is possible to use the Armbian designed for the Allwinner H6 (Orange Pi Lite 2) for the Allwinner H616 (Orange Pi Zero 2). I assume the differences between them might not be that big. Is it useable, if not, why is this the case. What could happen when I try to use it with the H616? Thank you very much in advance Ferry

Hi, I have a script in systemd which doesn't start automatically at boot using Orange PI PC+ under Armbian 22.02.01 Focal. I can see the script is read in the boot text. But my program doesn't run. [OK] Started WiProbe Gateway. It seems the that the script is executed, but stops somewhere in the script??? The program is in /root/Gateway/Bundle SCRIPT Gateway.service [Unit] Description=WiProbe Gateway After=netwok.target StartLimitIntervalSec=0 [Service] Type=simple WorkingDirectory=/root/Gateway/Bundle Restart=always RestartSec=1 User=root ExecStart=/root/Gateway/Gateway ExecRe…

I was trying to get my Fritz!WLAN AC860 to work which requires Mediatek drivers/firmware. I noticed that the various kernel modules (mt76x2u, mt76x2_common, mt76x02_usb, mt76_usb, mt76x02_lib and mt76) were already available through the armbian-firmware package, but the also required mt7662_rom_patch.bin was not. The Mediatek modules plus mt7662_rom_patch.bin are available in the firmware-linux-nonfree package, but this will only install properly after first removing the armbian-firmware package. Everything seems to work fine now (I'm using my OdroidC4 as a headless server), but I have this nagging feeling that one day I'll need to us…

Hi, Armbian users. I wonder is it safe to run `do-release-upgrade` to upgrade my Armbian + Ubuntu system from `20.04` to `22.04`? ``` New release '22.04.1 LTS' available. Run 'do-release-upgrade' to upgrade to it. ```

At https://www.armbian.com/odroid-xu4/ only CLI version is available. Is there a desktop version?

Hi, I need to install kernel headers to build a wifi driver. Using armbian-config to install the headers does not work ... After much searching came across a logical suggestion - i.e. install the 'linux-headers-current-sunxi' package ... When I install that package (on a fresh 22.08.1install), the package installed is for 22.05.03 ... which is, er, the wrong version? Where do I find the headers for 22.08.1 ? Many thanks!

Hello, I am using armbian on banana pi m2 zero uname -a Linux bananapim2zero 5.16.11-sunxi #22.02.1 SMP Sun Feb 27 09:17:03 UTC 2022 armv7l armv7l armv7l GNU/Linux I want to rebuild kernel, but i cannot find kernel source. Where I can find it? This code from https://wvthoog.nl/nanopi-ov5640-camera/#OV5640_sensor doesn`t work sudo apt update sudo apt upgrade sudo apt install build-essential uname -r # check your current kernel version sudo apt install linux-source-<your current kernel version> In my case: sudo apt install linux-source-5.8.6-current-sunxi cd /usr/src sudo tar xf linux-source-5.8.6-sunxi.tar.xz

Hi, I am using Rock Pi 4B and want to be able to turn the system on after sleep (suspend/hibernate or any other state that would allow it). Previously, I have used MRAA library to set an interrupt, and called system("shutdown now") inside interrupt code. I did it according to the following post and according to the MRAA examples. I wrote a shell script, which executes the MRAA program. Shell script, in its turn, is called by a service on a start-up. So, with this method I was able to shutdown the system, but I cannot get out of this state via button press. I researched few posts, such as: 1, 2, and 3. It looks like either I have to modify …

Hello, I saw from other posts that is possible to enable HWDecode for Video on the H3 of OrangePi PC O would love to make mpv or cvlc work with hwaccel People mention to apply the patches of LibreELEC on the Armbian build. But i dont have the knowhow to do so. Does anyone already have done this? any links, tips, guides, tutorials that i can follow Ty in advance and sorry for grammar

Hello! I have Firefly Station P2 (I use this images - https://users.armbian.com/balbes150/rk3568/) And everything is OK except for one problem: I can't see NVM disk when booting kernel 5.X, 6.X. Yet on kernel 4.X I can see nvm. Please help, what should I do to use nvm with 5.X kernel? Some output: root@station-p2:~# uname -r 6.0.0-rc4-media root@station-p2:~# lsblk NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINTS mmcblk0 179:0 0 14.8G 0 disk mmcblk0p1 179:1 0 14.7G 0 part /var/log.hdd / mmcblk1 179:32 0 29.1G 0 disk mmcblk1p1 179:33 0 28.8G 0 p…

Hi everyone I Install the latest version of Armbian Debian for the TinkerBoard S but at the beginning I have the problem of seeing that the image is always distorted, it is similar to having interference, it had not happened before with other operating systems. It also sometimes turns off meaninglessly or the mouse stops working.

Hi, as I would like to replace my old Banana Pi M1, I wonder which SoC I should use. I'd like to spend maximum 100€. What's the newest supported SoC which is right now available? Already orderes a Raspberry Pi 4 Gb 9 month ago....but still no idea when it'll be delivered. As I really like ARMbian and OpenMediaVault, I'd like to stick with it. I'd like to have at least a quadcore, gigabit-lan and 2-4GB ram.

there is a problem using tvheadend package on os armbian bullseye 22.08. if you download the tvheadend package, then after installation you return back to the pseudo-graphical shell and that's it. according to the video from YouTube, people could enter the administrator login and password for authorization in the web interface. but on orange pi pc with os armbian it does not work and without knowing the login and password it is stupidly impossible to get into the web interface. help solve the problem

Dear All, I am using Jammy with kernel 5.18 on hold, but yesterday I noticed very important updates that were kept back because the kernel is locked, such s: armbian-bsp-cli-odroidhca armbian-firmware linux-dtb-edge-meson64 linux-headers-edge-meson64 linux-image-edge-meson64 linux-u-boot-odroidhc4-edge I wonder if is worth to update or if I had better to stick with my current setup, where my main feature — ZFS — is working. What's your recommendations? Thanks in advance! F.

Is anyone prepared to sell me a 16Gb micro SD card preloaded with Raspbian O/S for Banana Pi BPi-M2 Berry board. I have been trying for some weeks now to install this O/S but I just can't get Phoenix Card to work. I have had lots of advice but none of it works. Can anyone help. Regards, robjim418@gmail.com

Cross-posting from the Radxa community, because I've not had much luck getting replies over there, and hoping this forum is more active. I’m in the process of porting a VISCA/NDI camera controller from Raspberry Pi to run on Rock Pi (4B+ version 1.73), and I’m running into some serious GPIO hardware failures that I don’t quite know how to deal with. As a starting point, I took a pre-built collection of LEDs and disconnected them from a working Raspberry Pi setup and connected them to the Rock Pi. They all worked fine when driving them from the Raspberry Pi, so I’m reasonably certain that the problems are specific to the hardware or drivers on the Rock Pi …

ls /sys/class/udc > UDC ls:write error: Device or resource busy I'm trying to get an armbian device (banana pi m2 zero and/or the orange pi zero LTS) to function as a USB client, but I can't seem to get the above step working. Any suggestions? lsof UDC returns nothing. On the RaspberryPI 4 this worked without issue

Is there an easy (as in a script or utility) way to install Armbian on the eMMC of a Le Potato? I dug through the forum and all the information was old and it seemed rather painful.

Hi, I built a second nas from rockpi4 and as I used the 12V plug to power the tower, I thought, I could use an old pc power supply to drive both. But when I start both nas from the same power supply, both will crash. Any idea, how I could avoid that crash and stil use only one power supply? Maybe add some electronic components?

Hello! Trying to build legacy buster desktop image for orangePi4 ends with error Processing triggers for libc-bin (2.28-10+deb10u1) ... Processing triggers for systemd (241-7~deb10u8) ... Processing triggers for dbus (1.12.20-0+deb10u1) ... [ o.k. ] Checking MD5 sum of installed packages [ debsums ] [ error ] ERROR in function create_rootfs_cache [ main.sh:588 -> main.sh:549 -> debootstrap.sh:59 -> debootstrap.sh:343 -> general.sh:0 ] [ error ] MD5 sums check of installed packages failed [ o.k. ] Process terminated [ error ] unmount_on_exit() called! [ main.sh:1 -> image-helpers.sh:0 ] [ o.k. ] Unmounting [ /home/lord/build/.tmp/…

hi im newbie here, i have small question ,sorry if so simple or silly. im confused about size block on armbian system (default system archive) if a make df , the system says 1 kb . Filesystem 1K-blocks Used Available Use% Mounted on tmpfs 102300 7152 95148 7% /run /dev/mmcblk0p1 59601388 1120660 57840424 2% / tmpfs 511492 0 511492 0% /dev/shm tmpfs 5120 4 5116 1% /run/lock tmpfs 511492 0 511492 0% /tmp /dev/zram1 47960 7412 36964 17% /var/log tmpfs 102296 0 102296 0% /run/user/1000 but, if im …

I do not have petitboot installed. I ran the Armbian buster with OMV5 for over a year. I decided to make a clean install and booted Armbian bullseye 11. I changed hostname and rebooted (curiously reboot doesn't reboot the hc4, why?). I used armbian-config to install OMV. Installation completed, brought me back to armbian-config and prompted to reboot. I hit reboot (then was forced to power cycle as hc4 won't come back to life after a soft-boot?). Note that I was able to power cycle and get a good boot BEFORE omv installed but not after. At that point Odroid hc4 never comes back online. I've been through this 3 times today. I gave it as…

it does not exit the location screen. it doesn't go into anything. can anybody help me.

I would like to use the uart of the orangepi zero 2 for an application. It esists for example /dev/ttyS5. But unfortunately the communication does not work. When I connect minicom to this port and short the two pins 8 and 10, I wanted to see the characters that are sent. Minicom can be connected (minicom -D /dev/ttyS5). But the characters are not mirrored. Do I need to enable the UART before? How to do this? The orangepi-config program does not exist on the system. The system reports after the login with: Welcome to Orange Pi 3.0.6 Bullseye with Linux 5.16.17-sun50iw9 Thank you for your thoughts.

Hi guys I's possible to convert .bin file to text file. Could someone help me to do that. thank you

Good day, I hope this email finds you well. I would like to create a custom animated screensaver and splashscreen on my Linux Armbian. I am current running the Jammy KDE Plasma version. Can you please guide me on how I can get this right and what I need to do to achieve this? I am also experiencing some graphical issues where some of the words disappear? Is there a fix for this? I am also trying to access the internet through wifi but it does not allow me to connect to my network. Any advice on how to get this right? Looking forward to hearing from you.

While using my Quartz64A I am getting cursor flickering while moving the cursor. While I move the cursor everything else just stops and only continues after the cursor stops moving. glxinfo is reporting mesa is able to find Mali G52 but I am having a feeling the GPU is not helping the desktop rendering here.

Hi everyone, I'm trying to compile an image for Orange Pi One with the default config for desktop - but I'm running on box86 error, unable to locate box86 then the process terminates. Do I need to install it first from here >>> https://github.com/ptitSeb/box86 before I can make a successful image compile? - I also tried compiling just the kernel and my virtual box setup works just fine outputting compiled deb files.

Hello everyone, I am beginner to ARMBIAN OS installed on Rock 3A ( 4/64 GB) board. Version of the Armbian OS is "Armbian_22.08.1_Rock-3a_jammy_edge_5.19.5_xfce_desktop.img.xz" and I'm trying to install basic radxa packages such as mraa, PoE function, etc. But I don't know how to and where to update the radxa repository on armbian os. Still I try to update the repository on /etc/apt/source.list.d/armbian.list , but while updating (apt update) it's throwing an error like "An error occurred during the signature verification". Please help me to solve this issue. Note : The motive is I have to work with PoE hat, for that mraa packages are essentials. And also I nee…

Hi all; Recently i installed a armbian and seems to be all ok less the global memory detection. I don't know by but the system have only detect 256 Mb. from total amount of 512Mb. (/proc/meminfo). Of course, i proved another OS and detet all memory so i know that's not a hardware problem. Is there any trick on kernel or something misconfigurated?

Hi. I'm Using Armbian 21.05.6 Buster. After some firmware update my Odroid freezes frequently. Trying to fix this issue I found root@nextcloudpi:~# dmesg (cut) [ 18.997342] swapon: swapfile has holes Relevant further information could be: root@nextcloudpi:~# zramctl NAME ALGORITHM DISKSIZE DATA COMPR TOTAL STREAMS MOUNTPOINT /dev/zram1 lz4hc 50M 1.2M 168.7K 636K 8 /var/log /dev/zram0 lzo 998M 4K 81B 12K 8 [SWAP] root@nextcloudpi:~# swapon --show NAME TYPE SIZE USED PRIO /dev/zram0 partition 998M 0B 5 root@nextcloudpi:~# swapon --show NAME TYP…

I have just downloaded desktop Armbian 22.08 Jammy XFCE on my Odroid-C2 and it works fine on a 1080p monitor. I need it to work on a different monitor though so I have added the following lines to /boot/armbianEnv.txt display_autodetect=false hdmimode=1680x1050p60hz and added hdmitx=forcergb in the bootargs (which I copy/pasted from /boot/boot.cmd) but it has no effect. My monitor works with these parameters on Hardkernels Ubuntu 18.04 image. What else do I need to do?

A month or two back, when I installed Armbian, I had to revert to an older kernel, 5.10.63-rockchip64, which has known vulnerabilities. I needed to be able to boot off of a USB 3 HDD, so I had to revert it and hold updates for the kernel/kernel headers. These are the commands I used to revert to the older kernel: sudo apt install linux-dtb-current-rockchip64=21.08.2 linux-image-current-rockchip64=21.08.2 sudo apt-mark hold linux-dtb-current-rockchip64 linux-image-current-rockchip64 Fast forward to today, where the issue with USB 3 has been apparently resolved in the latest kernel, I tried to unhold the kernel/kernel header updates, that seemed to work. …

Is there a command to load this splash screen that shows when I open a new session? Also is there a way I can show the storage availability/temperature for the second hard drive? I think the current setting only shows information for the drive on /sda but i need info for drive on /sdb

Hello, I have just updated the latest kernel available on my sbc orangepi+2e with the armbian-config tool and after that it no longer boots. After plugging in the serial port it complains "## Executing script at 44000000 Wrong Ramdisk Image Format Ramdisk image is corrupt or invalid". How can I fix it without having to reinstall everything? I run home-assistant and all the data is on emmc. U-Boot 2019.04-armbian (Jul 15 2019 - 18:03:30 +0200) Allwinner Technology CPU: Allwinner H3 (SUN8I 1680) Model: …

Hello all I have a many questions, but I will start off with the 2 I need to be helped on. 1: The Le Potato needs butter and sour cream. HAHA I has to say it... I am running the newest flavor of Armbian created in the last few weeks (Armbian 22.08 Jammy XFCE Kernel 5.10.y, Size: 1263Mb, Updated: Aug 30, 2022). I am new on to a non Pi bd so forgive me on the differences. After loading imaging and updating (or not) the board any time I try to do a full shutdown, all it does is reboot. After I get this to work I will work on my other issue below. 2: I would like to use this as a replacement for Pi 3A+ on a remote solar powered weather station …

root@nanopct4:/boot/overlay-user# armbian-add-overlay lcd-mipi-opi4.dts Armbian is not installed properly. Missing armbian-release or armbianEnv.txt I found 22.08 using extlinux.conf instead of the legacy set of boot.scr + text files. That will miss overlay function when using extlinux ?

Hello, I've Googled for a solution without success. Today, I set up a Le Potato w/Armbian XFCE 22.04. All was well except only root had RDP access. After trying various ideas from the internet, I still can't get in as a normal user. After the last attempt, I see this in /var/log/xrdp.log: [20220830-08:06:43] [INFO ] Socket 12: AF_INET6 connection received from ::ffff:192.168.50.226 port 63884 [20220830-08:06:43] [INFO ] Using default X.509 certificate: /etc/xrdp/cert.pem [20220830-08:06:43] [INFO ] Using default X.509 key file: /etc/xrdp/key.pem [20220830-08:06:43] [ERROR] SSL_read: I/O error [20220830-08:06:43] [ERROR] libxrdp_force_read: …

ix.io/48Zd I've simply installed Armbian 22.05 Jammy Kernel 5.15.y, Size: 307Mb, Updated: Jul 2, 2022 on my aforementioned subject title / tagged OrangePiPCPlus. I can't seem to get hassio to install with armbian-config and then with Software > Softy it doesn't seem like the image for homeassistant io gets pulled, because when I check with docker images list or docker ps I don't get anything returned. Plus the checkbox isn't checked in Soft for hassio when I go back. What could I be doing wrong here? I did install Docker first, anyone have any tips?

is there a chance that I could find older version of armbian for my sbc (orange pi pc plus)? in this case I need armbian buster for my sbc

Hi guy's urgent help needed, I have banana pi m2 zero and I need the hdmi Waveshare 7inch LCD settings help. I have tried to change the config file also dts file, none of those worked. Tried to build with hdmi lcd (internet help) - none Could any one point out what is need to be done to get it work? thank you

Hi, I installed a fresh Armbian_22.05.4_Rockpi-4a_sid_edge_5.18.0 first on SD-card, then I used nand-sata-install to copy system to emmc. After that I rebooted and set up the nas (rockpi-4a with 4 ssd-drives). I already used ssh remote shell to perform apt dist-upgrade and copying of about 6TB ... When all setup was finished, I shutdown the system, closed the tower and restarted again. On that restart, the network came up without inet-address. ifconfig showed eth0 and l0, but eth0 had a mac-address (not the one, I configured in armbianEnv.txt) but no ip-address. Here are some lines from syslog: Aug 28 15:57:01 mynas NetworkManager[1659…

Hello, I used to set dram freq at 132mhz on previous kernels, how can I do it now ? Linux nanopineo 5.15.48-sunxi #22.05.3 SMP Wed Jun 22 07:35:10 UTC 2022 armv7l armv7l armv7l GNU/Linux

Hello everyone, I need to install Armbian on a Pine64 Quartz64 model A but I don't know where to start. Can any of you give me a hand? A thousand thanks!

Hi, I installed Armbian 22.05.3 on a OrangePi Zero. There is a huge file in the root directory of the microsd card named qemu_fstype_20220704-070826_11972.core owned by root that is almost the size of the card. What is this file?

Hey, I'm new to armbian/linux and want to use an Orange Pi Zero 2 as a cheap OctoPi alternative. Bare Octoprint is already working, but I don't get the MJPG-Streamer for my usb-webcam to run. The OPiZ2 is running Focal 22.05.3 (5.15.48) and is up to date. (I didn't choose Bullseye because it's on an older kernel and the psu control plugin might need 5.05+) The instruction I found said: cd ~ sudo apt install subversion libjpeg62-turbo-dev imagemagick ffmpeg libv4l-dev cmake git clone https://github.com/jacksonliam/mjpg-streamer.git cd mjpg-streamer/mjpg-streamer-experimental export LD_LIBRARY_PATH=. make but I get: "E: Unable to locate pack…

I'm having trouble connecting my Android phone when it doesn't automatically connect and recognize. Is there a way to fix it or is there any documentation? Since it has so many different versions, I tried it and it still failed automatically. Sincerely thank you.

Hello, I've been just started using Armbian on my Tinker Board 2s and i'm facing problem that i dont get any output on my acer portable monitor using usb type - c. But when i use tinker os i get output on my acer portable monitor. Please help

# apt-get update Stary:1 http://ports.ubuntu.com jammy InRelease Stary:2 http://ports.ubuntu.com jammy-security InRelease Stary:3 http://ports.ubuntu.com jammy-updates InRelease Stary:4 http://ports.ubuntu.com jammy-backports InRelease Ign:5 https://apt.armbian.com jammy InRelease Ign:5 https://apt.armbian.com jammy InRelease Ign:5 https://apt.armbian.com jammy InRelease Błąd:5 https://apt.armbian.com jammy InRelease 500 Internal Server Error [IP: 107.175.134.226 443] Czytanie list pakietów... Gotowe W: Nie udało się pobrać https://apt.armbian.com/dists/jammy/InRelease 500 Internal Server Error [IP: 107.175.1…