Advanced users - Development

What kind of work is needed to upgrade Orange Pi 2E+ from legacy to kernel 4.x? Thanks, Kriston

Hello, I was able to complete custom (with USB gadget support) build of current Armbian version (5.17) for desktop using tip about workaround for u-boot compiling problem. But when I run h3disp in order to allow DVI monitor connection (-d), after the restart I still get no output to DVI monitor, while remote Putty connection works. I understand that this is version-in-development, but is there any way to fix (workaround) the problem?

Hi Experts, I am using Readily available MFRC522 NFC reader board. It works fine on Raspberry Pi but we are not able to read card on Orange Pi Zero. I followed steps in the below posts. Both are same and person posted confirmed that it works for him https://forum.armbian.com/index.php/topic/617-wip-orange-pi-one-support-for-the-upcoming-orange-pi-one/page-9#entry5747 http://stackoverflow.com/questions/41350031/dual-rc522-on-orange-pi Person who published the post says that he tested on 5.04 and I am using image Armbian_5.24_Orangepizero_Debian_jessie_3.4.113.img We have checked wiring again and again and wiring looks all OK. read.py runs but when card is …

Also fails 5.24 Jessie 4.9.0 Looks like a u-boot problem [14:22:59:581] U-Boot SPL 2016.09.01-armbian (Nov 01 2016 - 17:58:53) [14:22:59:585] DRAM: 512 MiB [14:22:59:594] Trying to boot from MMC1 [14:22:59:736] U-Boot 2016.09.01-armbian (Nov 01 2016 - 17:58:53 +0000) Allwinner Technology [14:22:59:742] CPU: Allwinner H3 (SUN8I 1680) [14:22:59:745] Model: Xunlong Orange Pi One [14:22:59:748] DRAM: 512 MiB [14:22:59:765] MMC: SUNXI SD/MMC: 0 [14:22:59:837] *** Warning - bad CRC, using default environment [14:22:59:846] In: serial [14:22:59:846] Out: serial [14:22:59:849] Err: serial [14:22:59:849] Net: phy interface0 [14:22:59:852] eth…

Dear all, I occasionally have a full /var/log at startup on various boards, probably because the logs are not rotated /vaccuumd at boot (we had a thread about this in the old opi1 forum). The rotating /vaccuum is currently done every 15 minutes, so I figured why not do it directly at boot as well? For this purpose I updated /etc/cron.d/armbian-truncate-logs with an extra @reboot line: PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin */15 * …

Hello, Interested in replacing virtualbox as a VM host, "docker" tool seems to be able to run on Debian/Ubuntu/other linux distro/MacOS/Windows (as they claim) My test: 1/ Installing docker on my amd64 4-cores Ubuntu 14.04 (too much tweaking to run "armbian" properly) see doc here also I have been using "Create a Docker group" and don't forget to run "Hello World" test 2/ To create a new container with Ubuntu 14.04 (if you have added docker group to your non-privileged user, if not use "sudo") $ docker run --privileged -i -t ubuntu:14.04 /bin/bash "privileged" is needed for /dev/loop operations, if not the container cannot see the loop d…

Issue identified by Hardkernel folks with ODROID XU4 and 4.9 kernel: 'When a bunch of sequential data(inode) is being sent to the UAS driver, the UAS driver is increasing the DMA block memory allocation dynamically for more efficient ring-buffer management. But the Kernel coherent-pool memory size was limited at 256KB by default and it was not sufficient for the UAS drivers.' I added this as a temporary workaround to my OMV installation routine but would like to see this fixed on normal installations and also all affected boards too. I've to admit that I neither know how to determine coherent-pool memory size nor what potential downsides of increasing this are…

We would like to thanks all of those who participated in our small contest. Great submission! It was really hard to make a cherry pick, while the winner will be chosen by the vote. Since we only need one default wallpaper and that one must be as generic and clean as possible, this choice is as follows. Few others, which might come into action, had either too small text size, strange colors or were simply too busy. We might will add more than those five wallpapers to our desktop or use them as a boot splash. Vote will be online until 16.12. 1. Dre0x-Minum-dark 2. chzbacon-Micro-SD 3. chzbacon-Linen---Dark 4. 1430-very-dark 5. username-dark

I'm struggling with XU4/HC1 and the try to have the rootfs on a connected USB disk. All attempts end up with: Gave up waiting for root file system device. Common problems: - Boot args (cat /proc/cmdline) - Check rootdelay= (did the system wait long enough?) - Missing modules (cat /proc/modules; ls /dev) ALERT! /dev/sda1 does not exist. Dropping to a shell! Rebooting automatically due to panic= boot argument I tried USB disks on USB3 and USB2 ports, according to leds and spin-up sound the SSDs/HDDs get power but device doesn't show up. I remember vaguely that we had such issues on other platforms where it was just a small missing bit in kernel config. But I …

Hello, for quite some time I have noticed that it seems impossible to build just the kernel, an image is built every time. I am using the following command: ./compile.sh BOARD=odroidxu4 BRANCH=current RELEASE=bullseye BUILD_MINIMAL=yes BUILD_DESKTOP=no BUILD_ONLY="kernel" KERNEL_CONFIGURE=no USE_CCACHE=no KEEP_KERNEL_CONFIG=no DEB_COMPRESS=xz Additionally, output/debs seems not to be cleaned, despite documentation indicating this should happen with default CLEAN_LEVEL. Am I doing something wrong? Or does documentation need updating? Thanks!

Hi !!!!!!! Anybody try the SPI protocol (python or c)? Thx all for your future anwser

Hello community, I have just been successful building my own image of Ubuntu focal + preempt_rt (kernel 5.15.76-rt53) for my Rock64 board for the first time (a bit of additional background at the end of my post). Exciting! I had a few hiccups along the way, and I need to figure out a few more things. So far I'm happy and impressed with the project. However, given I want to share my work (and the resulting image(s)) I would like to ask for some pointers on what is the best way to go in regards of forking armbian/build and the changes I found myself doing. I have added my kernel compilation flags to config/kernel/linux-rockchip64-curre…

Hi Armbians, (If this question is already asked/answered please help me find the link.) I need the "ceph" and "rbd" kernel modules for my orange and banana pi. I am starting with the most recent images released: Armbian_4.5_xxxx_Debian_jessie_4.2.3. What are the minimum required steps to build the additional kernel modules? Where is the source tree for that kernel build (4.3.3-sunxi)? I would prefer to build directly on the PI (as opposed to x-compile) but either is ok. I tried a few things, including git clone of Igors "lib" project with build scripts. Runnig that pulled a kernel source tree: "sources/linux-vanilla/v4.3.3" which I am able to use to…

Hi, I found problem below today. I have stability problems with services running on BananaPro and therefore this is second problem after "kswapd was killing some tasks" I decided revert back to older kernel 3.4.109. I am only letting you know... Division by zero in kernel. [10616.338198] [<c0015098>] (unwind_backtrace+0x0/0x134) from [<c03e7ab8>] (Ldiv0+0x8/0x10) [10616.350152] [<c03e7ab8>] (Ldiv0+0x8/0x10) from [<c00e87ac>] (vmpressure_work_fn+0x80/0x180) [10616.360314] [<c00e87ac>] (vmpressure_work_fn+0x80/0x180) from [<c004ca00>] (process_one_work+0x12c/0x3b0) [10616.370009] [<c004ca00>] (process_one_work+0x12c/0x3b0) from …

With just a few local test hacks, I was able to bring up kernel 5.10-rc1 on sunxi this morning (based on the new megous branch): root@air's password: _ _ ____ _ _ _ | \ | | _ \(_) / \ (_)_ __ | \| | |_) | | / _ \ | | '__| | |\ | __/| | / ___ \| | | |_| \_|_| |_| /_/ \_\_|_| Welcome to Armbian 20.08.14 Buster with Linux 5.10.0-rc1-sunxi System load: 2% Up time: 11 min Memory usage: 14% of 491M IP: 172.24.18.151 CPU temp: 34°C Usage of /: 24% of 7.2G Last login: Tue Oct 27 07:20:02 2020 from 172.24.18.20 root@air:~# cat /proc/version Linux version 5.10.0-rc1-sunxi (root@35504…

Hi all! I need to back to an older kernel version that I had used past year. In my PC, I conserve without any kind of changes, the working directory used to run compile.sh. If I did not missunderstood my Armbian documentation reading, there is an option to tell compilation process that don't try to upgrade sources files before compile (touch .ignore_changes). Am I right? And, if it's fine, Could somebody please explain me where and how must I apply these parameter? Thanks in advances! Edit: You could ask. Why he want to re-compile if he has past_year.img file? The reason is I need to include kernel headers nad my old compila…

Hello, I'm using the armbian trusty image with legacy kernel and try to setup an iscsi target server with it. Actually I tried to build my own kernel with the instruction list and the tools of armbian and activated the iscsi target in the kernel configure. In compile.sh I set kernel configure to yes and then I start compiling. Maybe you can tell me how to do it in the right way? Thanks and greetings

Can somebody confirm that this driver work on mainline opi0 kernel? https://github.com/avafinger/ov5640

Hi everyone, I have a problem with my Cubietruck that I was able to partly debug now, but I really like to have input from those who know more about this setup. On my Cubietruck (trusty, kernel 4.6.5-sunxi), I have a 120GB SSD (no-name brand) and added an ext4 partition and corresponding fstab line to mount it. Booting and mounting this partition works well when I cold start my system, and had powered it off before for a while. But when I do a warm start (sudo reboot), the system hangs on boot, quite reliably (it seems to occasionally work, though). I changed my kernel command line and added 'init=/bin/sh', started a 2nd bash terminal before replacing …

Kernel 5.3.y has just been labelled as EOL which was anyway expected to happen soon and most of our "current" kernels are already at 5.4.y ... Is sunxi/sunx64 ready for this upgrade? Don't care about 5.5.y at this moment which means DEV branch can remain as is or if someone out of the regulars take it further.

I've recently bought a Rock Pi 4a Board and can't get running armbian (The Image provided by Radxa works) but I want to get running the latest version. I've tried both nightly builds Armbian Bionic nightly development branch 4.20.y (22.05.2019)and Armbian Stretch nightly development branch 4.20.y Both Image boots U-Boot but cannot start the kernel: U-Boot 2017.09-armbian (May 22 2019 - 04:11:32 +0200) Model: RockPi-4B DRAM: 3.9 GiB DCDC_REG1@vdd_center: ; enabling DCDC_REG2@vdd_cpu_l: ; enabling DCDC_REG3@vcc_ddr: ; enabling (ret: -38) DCDC_REG4@vcc_1v8: set 1800000 uV; enabling LDO_REG1@vcc1v8_dvp: set 1800000 uV; enabling…

Hi all, I'am looking at creating a single unified H3 DietPi image (currently using ARMbian build tools), rather than one for each board. Would allow us to support all H3 devices, reduce work load and simplify DietPi source code. Basically I need to know if its possible, and which unique files/configurations would need changing to achieve it. The end goal: The user would download the H3 image, modify it for their board (eg: copy and paste job on /boot), prior to powering on. Some questions: Is script.bin the only unique configuration across all H3 boards? Aside from any additional linux stuff, like hardware items (eg: + onboard BT/WiFi) Does /usr/lib/linux-u…

I've build an dev image for my OrangePi 2 (kernel 4.10) to try mainline kernel and got into troubles with onboard wifi. It works fine in legacy with 8189es module, but there is no 8189es module in mainline image. So I tried 8189fs but it's not working. After doing some search I've managed to build 8189es module myself using https://github.com/jwrdegoede/rtl8189ES_linux.gitrepository. Quick manual: git clone https://github.com/jwrdegoede/rtl8189ES_linux.git cd rtl8189ES_linux/ make ARCH=arm KSRC=/usr/src/linux-headers-$(uname -r) CROSS_COMPILE= sudo mkdir /lib/modules/4.10.0-sun8i/kernel/drivers/net/wireless/realtek/rtl8189es/ sudo cp 8189es.ko /lib/modules/4.10.0-s…

Hello, I'm newbie to armbian, I am trying to build my own image, and i following the steps of this link: https://docs.armbian.com/Developer-Guide_Build-Preparation/ (i am not using Virtualvox) My OS is: Distributor ID: Ubuntu Description: Ubuntu 16.04.3 LTS Release: 16.04 Codename: xenial And my GCC version: gcc (Ubuntu 5.4.0-6ubuntu1~16.04.5) 5.4.0 20160609 I apologize, since I'll probably be asking some nonsense. I follow the steps to build my own image, and I get the following error: [ o.k. ] Building deb [ linux-u-boot-next-lime_5.33_armhf.deb ] [ error ] ERROR in funct…

Hi All, I have looked at the "How to build your own image/kernel post", but am wondering what the best way for me is to contribute. Basically, I often use the pine64 running armbian as an IoT control hub/gateway where it is running an install of nginx/php/mysql/mosquito/nodered. The php part is mostly because of phpmyadmin, so nginx comes in that case configured with node-red mounted on / and phpmyadmin on /phpmyadmin. I could create my own image with all this stuff on it, and also configure some default usernames, passwords and wifi setup, but I also noticed the "Software" section in armbian-config. So my question is which of these 3 options would b…

after quite a few frustrating attempts to setup a built environment, fixing some issues, jumping over some hoops for the build, I managed to get to the 'starting point' of a build ./compile.sh [🌱] uuidgen not found [ uuidgen not installed yet ] [🌱] Using prebuilt Armbian image as base for 'ubuntu-jammy' [ DOCKER_ARMBIAN_BASE_IMAGE: ghcr.io/armbian/docker-armbian-build:armbian-ubuntu-jammy-latest ] [🌿] Docker info [ Docker 19.03.11 Kernel:4.12.14-lp151.28.91-default RAM:31.28GiB CPUs:8 OS:'openSUSE Leap 15.1' hostname 'snoopy1.internal' under 'Linux' - buildx:yes - loop-hacks:yes static-loops:no ] [🌱] Creating [ .dockerignore ] [🌱] Docker launcher [ enabling all …

I'm trying to turn on the SPDIF transmitter in the H3 mainline kernel (v4.10). To do this I'm copying sun4i_spdif.c from sunxi-next kernel (spdif marked as working starting from kernel v4.11) and make some changes in .dts files for OrangePi PC: diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts index 90a767f..29980a8 100644 --- a/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts +++ b/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts @@ -91,6 +91,24 @@ gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>; }; }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "On-board SPDIF"; + + simple-audio-card,c…

WireGuard is a modern VPN service for Linux. For best performance it is requred to build WireGuard as kernel module (described at https://www.wireguard.com/install/) Right now after each update of kernel of Armibian WireGuard stops work as new kernel has no compiled wireguard.ko module Is it possible to integrate WireGuard to Armbian kernel?

I am using Armbian 5.x images on the Orangi PI plus box since it appeared as it is stable and the most complete. root@orangepiplus:/usr/src/h3monitor# uname -a Linux orangepiplus 3.4.110-sun8i #18 SMP PREEMPT Tue Mar 8 20:03:32 CET 2016 armv7l GNU/Linux The LED visual board status is helpful during initial launching or headless usage. There is currently only one RED light for all the board statuses. It is somewhat confusing as for the Good running status. It is worth switching to GREEN, once the Armbian is loaded successfully and back to RED during the shutdown procedure. It is worth turning the red LED off after shutdown. This LED behavior has be…

I've started looking at switching Rockchip64-DEV to 5.0.y ... I've now my RockPro64 under 5.0.y ... It look much more easier task than the previous one with Sunxi-DEV ! @Igor , I've pushed a "rockchip64-4.20" tag that will allow to bring 4.20.y into NEXT if we wish ... Also, is there any reason why RockPro64 still using U-Boot SPL 2017.09-armbian (from Ayufan's branch) instead of Mainline U-Boot such v2019.01 ? If No, I will switch that too ...

Hello, Just returning after a little while, I cannot get ethernet working on my opi+2e with mainline kernel, direct cable connection to PC, no serial console at hand, neither HDMI output, so I had the habit of blindly booting then sshing into the box... I tried my personal config + megous repo, xenial or jessie, current armbian repo nothing coming out of eth on the PC (tcpdump -i eth0). LEDs, green solid on, red heartbeating, orange eth led blinking slowly. I then reverted back to montjoie's repo (default for dev BRANCH), for identical results. Could this be the updated u-boot (I think I saw a new version being used) ? Or is this expected to be…

Hi Igor, Hi Everyone, I am very new here. I have Orange Pi R1 and using Armbian everything is working, however I have proprietary software and want to secure it ( as much as possible ) Read a lot of articles and read about Armbian supporting CRYPTROOT_ENABLE , so decided to try to build my own image. I have succeeded in building 5 images but unfortunatelly none of them boots correctly. I decided to first build image without CRYPTROOT_ENABLE but still cannot succeed. It gives me KERNEL PANIC after truing to load/uncompress Linux. I Basicly want default Armbian image for Orange Pi R1 + CRYPTROOT_ENABLE. My second question will follow …

I've started the job of switching both rockchip64-dev and rk3399-dev to 5.2.y ...

Hi, I updated the gc2035 driver, kernel 3.4.x. The driver can be loaded with parameter, so you can choose to have different window size and/or image quality on the fly (well, kind of). Parameter: hres=[0,1,2] hres=0 (default without parameter) 640x480, 15 fps, good quality (fps with good light condition) 1280x720, 13 fps, poor quality (fps with good light condition) 1600x1200, 10 fps, poor quality (fps with good light condition) hres=1 800x600, 12 fps, good quality (fps with good light condition) 1600x1200, 8 fps, medium quality (fps with good light condition) hres=2 320x240, 20 fps, poor quality (fps with good light condition) 640x480, 18 f…

armbian has XFCE (hw accelerated where possible) desktop images - is there interest in getting Wayland running on as many SBCs as possible so we can have smooth, high quality desktop?

I want to have a "dual boot" system with Openelec for video and Armbian for the rest :-) The boot files are named different except 'boot.scr'. So the idea is to rename it, so the right one is used and then do a reboot. Not the PC dual boot with a menu, but good enough for me :-D So I copied the files from the /boot folder to an existing FAT partition and copied the rest to a newly created ext4 partition (mmcblk0p3). I modified 'boot.scr' to this: gpio set PL10 gpio set PG11 setenv machid 1029 setenv bootm_boot_mode nonsec if fatload mmc 0 0x00000000 /boot/.verbose then setenv verbosity 7 else setenv verbosity 1 fi setenv bootargs "console=tty1 r…

Kriston - USA - documentation rework - July, August Task from http://forum.armbian.com/index.php/topic/1325-claim-a-task-set-due-date-and-start-doing-it/page-4#entry11910 Github issue @Kriston please assign yourself github issue, and provide an update here if possible. I apologize in advance as I'm shuffling docs around to satisfy the Doc software task

I was able to get RTL8188FTV $2.00 US USB wifi https://www.ebay.com/itm/123713550193 working with a script I made from a forked project. The power saver has already been disabled in the Makefile. Check out https://github.com/sgjava/rtl8188fu/tree/arm. I've tested this on ARM 32 and ARM 64, but not x86 or x86_64. This is currently a dkms module that requires beta repos to get matching kernel headers.

Hello, I have been able to run the rock64 testing image posted in https://www.armbian.com/rock64/ I want to customize this image through userpatches/customize-image.sh, as I have done in the past with the odroid HC1. The plan is to create more SD card images with NextCloudPi As a first step, I want to replicate that testing image, that works for me. Following Igor's advice in this post, I tried with the following command ./compile.sh docker \ BOARD=rock64\ BRANCH=default\ KERNEL_ONLY=no\ KERNEL_CONFIGURE=no\ RELEASE=stretch\ BUILD_DESKTOP=no\ EXPERT=yes I was asked a few questions regarding kernel con…

What is the most proper way to calculate battery discharge ratio? I am trying to add this here: Load: 0.10, 0.50, 0.38 - Memory: 974Mb - Battery discharging: 30% AXP209 gives me: http://linux-sunxi.org/AXP209 - voltage - charge / discharge current Battery capacity should be the only parameter I want to set. Is there any advanced calculation script or simply, but not so accurate, direct connection between voltage and percentage?

Hello All in blue ...it's ok but in red ....not ok i started by git clone --depth 1 https://github.com/igorpecovnik/lib Clonage dans 'lib'... remote: Counting objects: 1075, done. remote: Compressing objects: 100% (935/935), done. remote: Total 1075 (delta 155), reused 806 (delta 70), pack-reused 0 Réception d'objets: 100% (1075/1075), 50.19 MiB | 1.06 MiB/s, fait. Résolution des deltas: 100% (155/155), fait. Vérification de la connectivité... fait. OK ! After i copy compile.sh in my directory and GO! ./compile.sh I choose "full os image to generate a sdcard ... board LIME ....Next lastest stable @kernel.org....jessie debian8 .......image with…

Hello, I've finally gotten around to writing the GitHub Actions based Linux Kernel Shallow git trees exporter. It's very simple, a single shell script and GHA workflow. It prepares shallow bundle (and ready-to-go .tar too) everyday on a schedule and publishes to GitHub Releases. Please take a look https://github.com/rpardini/armbian-git-shallow - theres a README that shows how to use the bundles outside of Armbian. If this is a good idea, I'd move it to armbian/kernel-git-shallow in GitHub. And then I'd start using those in armbian-next first as a test ground. I mention I few people I know are interested in the subject @Igor and…

I'm curious as to why we explicitly specify CPUMIN and CPUMAX values in the Armbian board configs, for most/all boards... These values of course propagate their way into the MIN_SPEED and MAX_SPEED settings in the target /etc/default/cpufrequtils configuration file (e.g., see lib/makeboarddeb.sh). If these values aren't specified, then the cpufreq driver will base its speed ranges on what the underlying H/W supports (e.g., specified via the board DT(s)). So...if the underlying driver configuration provides the supported speed range, then we actually need to specify these values? I ask because I'm running my H5 boards with my overlays t…

I'm trying to compile the tv.ko driver for the NanoPi M1 (to see if I can bake overscan compensation into it). First I compiled the whole of Armbian to see if I can produce the .ko in such a roundabout way, but besides being a very dumb/slow way of going about it, I can't find any file called "tv.ko" after running all of that (it probably gets cleaned up). Short of mounting the generated Armbian image manually and extracting tv.ko, is there a way to compile just the driver? It normally sits at: /lib/modules/3.4.112-sun8i/kernel/drivers/video/sunxi/disp2/tv/tv.ko And sources for it are under: sources/linux-sun8i/sun8i/drivers/video/sunxi/disp2/tv/ The modin…

Dear Igor, Thank you very mutch for tis great job! I did some tests based on your image with udoo-quad, works perfect! But I do have some trouble on udoo-dual, kernel stops without any console output (just loading kernel...) so I decided to compile my own, but I get [ o.k. ] Compiling uboot [ o.k. ] Compiler version [ arm-linux-gnueabihf-gcc 5.4.0 ] make: *** Keine Regel, um „udoo_qdl_config“ zu erstellen. Schluss. What do I have to change? Best regards Marcus

Hi, I have got Rock-3C board recently. It is not Rockpi4 C. Main difference compared to Rock-3A is missing pci-e connector form back of the board, soldered wifi module and only 5V input power. There is no system available for this board. Any ideas how to get this board working?

Simple library for 128x64. Works fine with SH1106 1.3" OLED and OrangePi Zero (4.9 kernel). You just need to activate I2C interface by replacing "disabled" with "okay" in device tree file (or in the fex). Connect display and test with "sudo i2cdetect -y 0" (or 1). If your display has 3d address instead 3c, change OLED_I2C_ADDR parameter it in the oled.h. Enter "make" to compile and run demo with "sudo ./oled_demo /dev/i2c-0". This library was written by Sonal Pinto for Arduino and ported to Linux by Vladimir Komendantskiy. I just wrote functions for text drawing and add three little fonts. This library only can draw text at X Y with specified font and draw cu…

hello! I need to create my own initial ramdisk during the armbian build process by supplying a value to this kernel tag:- grep CONFIG_INITRAMFS_SOURCE /home/andrew/armbian/build/cache/sources/linux-kernel-worktree/6.18__sunxi__armhf/.config CONFIG_INITRAMFS_SOURCE="usr/sideinitrd.cpio" my build runs under docker, and no matter where i place the CPIO file, i get this error: [🐳|🔨] make[3]: *** No rule to make target 'usr/sideinitrd.cpio', needed by 'usr/initramfs_inc_data'. Stop. [🐳|🔨] make[2]: *** [scripts/Makefile.build:556: usr] Error 2 [🐳|🔨] make[2]: *** Waiting for unfinished jobs.... just specula…

When I used the Debian image, it looks like the wireless-regdb's were not in the correct location. Using this guide I was able to get CRDA to work. wireless-regdb: Missing support for kernel direct loading Did I miss something in the initial setup?

Hi to all Armbian Devs, According to my local experience done today with newly Ayufan's 4.20.0 tag done this morning, it seems to be quite ready ... (Except for my failure to get eMMC running on RockPro64, but works well on OPi-RK3399 and NanoPC-T4) So, I'm asking you if I should commit all those stuff !!! @TonyMac32 during those builds, I see 2 patches broken, I didn't investigated, but maybe those patches are simply not relevant anymore and can be deleted : [ warn ] * [l][c] renegade-add-uhs.patch [ failed ] [ warn ] * [l][c] rk3328-add-GRF-GPIO.patch [ failed ] One my side, I need to fix some patches to…

Spoiler ___ _ _ _ ____ ____ / _ \ __| |_ __ ___ (_) __| | / ___|___ \ | | | |/ _` | '__/ _ \| |/ _` | | | __) | | |_| | (_| | | | (_) | | (_| | | |___ / __/ \___/ \__,_|_| \___/|_|\__,_| \____|_____| Welcome to ARMBIAN 5.32.170701 nightly Ubuntu 16.04.2 LTS 4.12.0-odroidc2 System load: 0.00 0.02 0.00 Up time: 4 min Memory usage: 2 % of 1855MB IP: 172.16.100.183 Usage of /: 19% of 7.0G [ General system configuration: armbian-config ] root@odroidc2:~# Download: https://dl.armbian.com/odroidc2/Ubuntu_xenial_next_nightl…

I installed the linux-image-dev-sunxi64 and linux-dtb-dev-sunxi64 packages, which pulls in the 5.1.5 kernel, and it seems something is amiss in the pinebook dtb. On the 4.19 kernel, pwm-backlight powers on, and you get video output, however, on 5.1.5 once u-boot loads the kernel and it is starting, video output goes away. In the 4.19 kernel, the kern.log shows the following output during boot: May 29 19:15:10 localhost kernel: [ 3.937999] EXT4-fs (mmcblk0p1): mounted filesystem with writeback data mode. Opts: (null) May 29 19:15:10 localhost kernel: [ 5.573863] random: lvmconfig: uninitialized urandom read (4 bytes read) May 29 19:…

Hi, On the main site: https://www.armbian.com/ it says only 60 days to go for the next release :-) Well, to have a good user experience and squash bugs I think we should do a feature-freeze from about day 50 onwards - what is your take on that ? To do so, I was thinking about how you could handle this period on Github. Will “pull request’s” after feature-freeze be tagged for later integration? Everybody is welcome in squashing bugs (only the ones in code) eg. updating or adding configuration file for armbianmonitor ? eg. updating or adding information to the documentation ? Last but not least, if you can help with s…

Could anybody confirm building Bananapim2 jessie next exits after compiling u-boot around line 142-146 in common.sh? wc: ... /output/debs/linux-u-boot-next-bananapim2_5.05_armhf.deb: no such file or directory The debs directory is empty. (I didn't check for hidden files.)

Good morning all, how are you?. I'm looking for help on knowing about the buffer strength on an H3 board, I've been looking on the H3 SoC datasheet and found this about GPIO's: Buffer Strength defines drive strength of the associated output buffer. but I don't know if the buffer is the entire port or not because I can't find any other reference to it and I don't want to fry the board. Can anyone explain me this?. Thanks in advance dor the help.

To help diagnose the issues I'm facing with AP6212 with other boards, I've decide to build an image for the newly received NanoPiM1Plus. It produced the following image : Armbian_5.27_Nanopim1plus_Debian_jessie_dev_4.10.11.img I've plugged an USB-TTL on the board, it booted until the login prompt. Trying the usual root/1234 failed, looking at FriendlyArm site, although I'm not using their image, but an Armbian freshly built, I've try their passwd : root/fa It logged ... looking for AP6212 traces, I've seen some "bcmsdh_sdmmc_probe" ... Doohh ? I did "uname -a" : again, Doohh ? : Linux FriendlyARM 3.10.65 #4 SMP PREEMPT Fri Mar 24 11:…

Building some more custom banana Pi images with the Igor repo. Tried to install plex and it seems to succeed but when finalizing the image these errors occur 0 upgraded, 1 newly installed, 0 to remove and 21 not upgraded.Need to get 109 MB of archives.After this operation, 0 B of additional disk space will be used.Get:1 http://dev2day.de/pms/wheezy/main plexmediaserver armhf 0.9.12.3.1173-937aac3-1~wheezy [109 MB]Fetched 109 MB in 1min 9s (1,567 kB/s) Selecting previously unselected package plexmediaserver.(Reading database ... 39625 files and directories currently installed.)Unpacking plexmediaserver (from .../plexmediaserver…

I've decided to give a try for a Mainline PineA64 Armbian Full Image build. Unfortenately, it seems that U-Boot is not in good shape, it stall right at the beginning without even trying to load kernel : HELLO! BOOT0 is starting! boot0 commit : 045061a8bb2580cb3fa02e301f52a015040c158f boot0 version : 4.0.0 set pll start set pll end rtc[0] value = 0x00000000 rtc[1] value = 0x00000000 rtc[2] value = 0x00000000 rtc[3] value = 0x00000000 rtc[4] value = 0x00000000 rtc[5] value = 0x00000000 DRAM driver version: V1.1 rsb_send_initseq: rsb clk 400Khz -> 3Mhz PMU: AXP81X ddr voltage = 1500 mv DRAM Type = 3 (2:DDR2,3:DDR3,6:LPDDR2,7:LPDDR3) DRAM clk = 672 MHz DRAM zq valu…

The script /etc/init.d/armhwinfo is executed on boot and gathers information about the machine's capabilities to tweak some settings. On my Cubieboard2 running Debian Jessie, it sometimes takes up to 20 seconds to execute. For example, last boot: $ systemd-analyze critical-chain multi-user.target @30.700s └─armhwinfo.service @12.831s +17.867s └─basic.target @12.155s └─timers.target @12.130s └─systemd-tmpfiles-clean.timer @12.130s └─sysinit.target @12.097s └─networking.service @4.315s +7.732s └─systemd-random-seed.service @3.979s +112ms └─systemd-remount-fs.service @3.672s +286ms …

I have worked with a BeagleBone Black which has a very nice feature. Out of the box you can connect it to a laptop via USB and it sets up a network between the BBB and the laptop. Is there some kind of equivalent to allow the USB OTG ports of these boards to be used for a PC to Device network ? I am particularly interested in the H3's

Hi guys, Given the not so great durability of SD cards (and limited storage...I try to keep everything on NFS mounts, but there's always some log that decides to randomly fill the SD card full of crap), and the incapability of run properly docker (it runs, but it NEEDS to use damn local storage, and won't take an NFS mount for some reason...it gets full real quick), I was considering to boot to a iSCSI target. This would let me expand storage anytime I need, plus it would make backup and snapshots a piece of cake. Is there a way to do this?

Hi to everyone! I've just bought an orange pi pc+, and i've seen that the script that should install armbian into mmc is not working for me. The script only write the rootfs, but I am not able to see uboot and MLO. In past i've used proto-Board like BeagleBone. So the question is, how the script works? is there any way to compile MLO?

Installed image Jessie server (Legacy) on the board BananaPi. Connected HDD SATA, create two partitions /dev/sda1 (swap) and /dev/sda2 (ext4). The system moved to /dev/sda2. How to move a swap of the /var/swap (in /etc/fstab) on /dev/sda1? How does the script /tmp/create_swap.sh? It starts with the system?

Hi, I'am Patrick from France, it is my first post on the forum. I am porting the Zortrax m200 plus 3D printer to Armbian and my last important step would be to have the LCD screen working. I cross compiled my module but I have this message when installing it: # insmod panel-himax-hx8394.ko [ 1760.189919] BPF: [120533] Invalid name_offset:2238391 [ 1760.195183] failed to validate module [panel_himax_hx8394] BTF: -22 insmod: ERROR: could not insert module panel-himax-hx8394.ko: Invalid parameters Then I added the module source code to the sources, but calling ./compile.sh seems to update the repo and revert my changes such as I do not see my m…

Hi! I have a problem with my Orange Pi Lite 2 I tried to connect my device to my home WiFi. But the device does not see the wifi, at a distance of 10 centimeters. I try to launch commands: nmtui-connect *name to my WIFI* nmtui-connect for show all WiFi Network. But in neither case does the device manage to identify the network. I tried using: vim /etc/wpa_supplicant.conf I tried to edit the file and to insert the data of my network but nothing. Can anyone give me a hand to solve this problem? Thanks everyone in advance!

I'm just trying to create a new image for the ClearFog Pro, b/c I need some special kernel modules built-in. Compiling kernel 4.4.4 with my settings works great, but I have problems to boot the image. This is my build command: sudo ./compile.sh BRANCH=next BOARD=armada KERNEL_ONLY=no BUILD_DESKTOP=no PROGRESS_DISPLAY=plain RELEASE=jessie But u-boot complains about starting with the following message. Even the u-boot `help` command doesn't work. ... Board configuration detected:Net: | port | Interface | PHY address | |--------|-----------|--------------| | egiga0 | RGMII | 0x00 | | egiga1 | SGMII | In-Band | | egiga2 | SGMII | In-Band …

Hello, before even thinking about arranging a CSC board bring up pull request to armbian, I would be pleased to know if it sensible to do that for a TV Box which is not sold anymore but still quite powerful because of its rk3288 SoC. I made my own fork of armbian (see here). I tried to do things the most tidy way, following the best practices learnt from the documentation. The box has very good support now, but requires some initial setup to clean the eMMC. Also I made some customizations to kernel configs which, I guess, should be moved away (mali driver compiled by default, devfreq support, brcmfmac driver for AP6330 wifi, maybe other things...) …

Where are config files in source kernel with function to enable next uart port in udoo?

Hello, for a piece of advice, I have compiled kernel 4.6.1 for Lamobo-R1, USB is KO, I am switching back to 4.5.5 in the meantime. [gr:~] $ dmesg | grep usb [ 3.346361] reg-fixed-voltage usb0-vbus: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb0_vbus_pin@0, deferring probe [ 3.346404] reg-fixed-voltage usb1-vbus: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb1_vbus_pin@0, deferring probe [ 3.346445] reg-fixed-voltage usb2-vbus: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb2_vbus_pin@0, deferring probe [ 3.349520] usbcore: registered new interface driver usbfs [ 3.349626] usbcore:…

Hi, After 2 tests with recent images (5.77) with debian stretch for s912 (balbes ilmages) and dev image for pineh64, I get the same issue when configuring locales. I selected fr_FR.UTF-8 in armbian-config and I also ran manually dpkg-reconfigure locales and locale-gen, but I ended each time to default locales settings (ANSI_X3.4-1968). Only the LANG variable is set to fr_FR.UTF-8 and all LC_XXX variables are set to C. To solve this issue, I have modified manually the /etc/environment to set LC_ALL=fr_FR.UTF-8. Does anybody else have this issue and is it specific to debian? With a 5.75 stretch image the locale configuration worked well.

armbian-firmware_20.08.14_all.deb 20-Oct-2020 22:04 6917020 armbian-firmware_20.08.15_all.deb 24-Oct-2020 21:01 1120 armbian-firmware_20.08.16_all.deb 24-Oct-2020 22:12 1120 https://armbian.systemonachip.net/apt/pool/main/a/armbian-firmware/ $ sudo dpkg -L armbian-firmware-full /. /lib /lib/firmware /lib/firmware/3com /lib/firmware/RTL8192E /lib/firmware/RTL8192SU /lib/firmware/acenic /lib/firmware/adaptec /lib/firmware/advansys /lib/firmware/amd /lib/firmware/ap6210 /lib/firmware/ap6212 /lib/firmware/ar3k /lib/firmware/ar3k/1020200 /lib/firmware/ar3k/1020201 /lib/firmware/ar3k/1020201coex /lib/firmware/ar3k/30000 /lib/firmware/ar3k/30101 /lib/firmware/ar3k/…

When I reboot my Orange Pi PC 2 with my Realtek USB Dongle so the firmware is already loaded onto the Dongle I am seeing this: [ 31.659072] Bluetooth: hci0: RTL: examining hci_ver=0a hci_rev=097b lmp_ver=0a lmp_subver=ec43 [ 31.659815] Bluetooth: hci0: RTL: unknown IC info, lmp subver ec43, hci rev 097b, hci ver 000a [ 31.659830] Bluetooth: hci0: RTL: assuming no firmware upload needed [ 31.659852] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000002 [ 31.668671] Mem abort info: [ 31.671488] ESR = 0x96000004 [ 31.674561] EC = 0x25: DABT (current EL), IL = 32 bits [ 31.679880] SET = 0, FnV = 0 [ 31.682937] …

I have Armbian Jessie running on a Orange Pi Lite board and the login script is showing the local loopback ip (127.0.0.1). It appears to be doing this because /etc/update-motd.d/30-sysinfo calls ifconfig -a and pulls the first ip, which in this particular case, is the local loopback. For the orangepi-lite, i wrote the following command in customize_image.sh and it fixes the problem in this case. sudo sed -i "s/ifconfig -a/ifconfig wlan0/g" /etc/update-motd.d/30-sysinfo It basically changes the script to pull the ip address from wlan0 instead of whatever one it finds first This could also be called from the command line for the same effect instead of during compilation.…

Hi! I have been using Armbian for long, but I am new to the Development/build system. I have however set the environment and I can build images. Now, I want to create a custom Armbian image with the following customization: - Separate ext2 partition for boot - second partition for LVM - Root Filesystem in Logical Volume and fixed size. - Cloud Init, with an extra partition for NoCloud Datasource. I see in the documentation how to install new packages, but not how to partition the SD card. How can I change the partitioning? On the other hand. Can I just build an image without compiling the Kernel? …

I believe this question goes to @rpardini as maintainer of patches for Rockchip series in the `build` repo: I'm trying connect camera to Orange Pi 3B (yes, it boots from community support on edge kernels), but spent 2h digging to find no drivers for CSI2 from Rockchip's fork are ported to patches for recent kernels (for example: https://github.com/armbian/linux-rockchip/blob/rk-5.10-rkr6/drivers/phy/rockchip/phy-rockchip-csi2-dphy.c and corresponding device trees to instantiate these drivers). This is a little chicken egg problem as I need recent kernels to have access to open source GPU drivers - they're not present on 5.10 based original system i…

Hi All, as I understand, new kernel does not support script.bin any more and uses something called Device Tree Blob. In source (DTS) file of this hell are two sections concerning LEDs: pinctrl at 01c20800 { led_pins_lamobo: led_pins at 0 { allwinner,pins = "PH2"; allwinner,function = "gpio_out"; allwinner,drive = <1>; allwinner,pull = <0>; } and this one: leds { compatible = "gpio-leds"; pinctrl-names = "default"; pinctrl-0 = <&led_pins_lamobo>; green { label = "lamobo:green:usr"; gpios = <&pio 7 24 0>; default-state = "on"; }; }; Is here somebody, who und…

Hi there, I've tried to migrate from my old 16.04 ubuntu build machine to 18.04 regarding the documentation there is no need for extra packages. To get compile.sh running I've added build-essentials, ccache, make & libpython. Now there is a problem with openssl/bio.h. Is there a complete list of packages needed? I've set up my VM using the ubuntu-18.04.1-desktop-amd64.iso image. Is it solely failing by not using the mini.iso? Regards, Sebastian

Hi, I am using mainline 4.10.0-sun8i and to enable I2C I added: overlays=sun8i-h3-i2c0 to armbianEnv.txt and rebooted, then I checked: cat /proc/device-tree/soc/i2c\@01c2b400/status and still found that it was disabled, I feel that I may be missing a step, like having to compile armbianEnv.txt into the config script, is that so? Just to make sure it wasn't working, i changes the pins to I2C using: sunxi-pio -m PA11'<2>' sunxi-pio -m PA12'<2>' BTW. sunxi-pio has very few code comments, did not specify the field order and finding which bits to flip in the H3 data sheet was annoying, did you want me to fix and submit a pull …

Hi, I'm working with bananapi M1+ and downloaded a raw image for banana pi A20 from armbian.com Now I want to work in a root account so that later, I possibly remove the pi account and use only the root account.(for embedded) Is there any way to boot as root? Thanks in advance!

Hi, totally new at this but here goes. I have been working on a IoT project involving the pcDuino and have been having issues with the image supplied by linksprite and WiFi drivers etc. I came across armbian, noticed the pcduino wheezy image and downloaded, installed all good and very impressed. I then went to run my python scripts to test gpio ports and sensors but received the following error: File "/home/iotadmin/gpio/__init__.py", line 43, in pinMode with open(_MODE_FD_PATH % id, 'w') as f: IOError: [Errno 2] No such file or directory: '/sys/devices/virtual/misc/gpio/mode/gpio1' I assume that the device mapping is different? I would appre…

Hi, Please help. I am building kernel using armbian build system for a long time, but in past two releases of current kernel (5.15.23 and 5.15.53) I am getting errors while installing: modinfo: ERROR: Module /lib/modules/5.15.24-sunxi/kernel/drivers/cdrom/cdrom.ko.xz not found. modinfo: ERROR: Module /lib/modules/5.15.24-sunxi/kernel/fs/isofs/isofs.ko.xz not found. modinfo: ERROR: Module /lib/modules/5.15.24-sunxi/kernel/fs/jfs/jfs.ko.xz not found. modinfo: ERROR: Module /lib/modules/5.15.24-sunxi/kernel/fs/reiserfs/reiserfs.ko.xz not found. modinfo: ERROR: Module /lib/modules/5.15.24-sunxi/kernel/fs/udf/udf.ko.xz not found. modinfo: ERROR: Mod…

Hey , I need to get the official source code for the last stable version of armbian for orangepi (mainly the kernel): https://www.armbian.com/orangepi/ meaning version 4.19.y by the given link, but as I look at the source code in github, all I can find are tags and commits for 4.14 and 4.20. Is there a way to find the commit with the source code for the official release in the given link?

Was in dire need of Armbian on my new toy, the HBP with a iMX8Q CPU ;-) The board features dual WWAN (PCIe + M.2) sockets for highspeed 3G/4G/5G modems with a SIM socket. The Debian build from SolidRun did not have any modem drivers enabled in the kernel so there was headache. Wipped up this WIP configuration and it builds and runs with: ``` $ ./compile.sh BOARD=hummingboardpulse-imx8q BRANCH=legacy RELEASE=buster BUILD_MINIMAL=no BUILD_DESKTOP=no KERNEL_ONLY=no KERNEL_CONFIGURE=no ``` NOTE: It uses the HDMI and LPDDR4 binary blobs from NXP. You will get a prompt during build to accept the license. The board is default configured to boot from SD using …

https://github.com/jernejsk/OpenELEC-OPi2/blob/openelec-7.0/projects/H3/patches/linux/linux-88-enable-tv.patch so this is an openelec patch is there anyone to be kind enough to apply this to armbian?

Hi everyone, I need to ask about GPIO pins. I have Cubieboard2 with Armbian (Jessie, Legacy) and I cannot export any GPIO pin as described here http://linux-sunxi.org/GPIO#Accessing_the_GPIO_pins_through_sysfs_with_mainline_kernel, chapter " Accessing the GPIO pins through sysfs with mainline kernel". I was able to play with GPIO this way on Cubian nicely but since Cubian is more or less dead without much support I moved to Armbian. I am able to export only pins with adress 1 or 2 as these are in the script.bin. I quite suspect that I need to change script.fex from GIT, convert to script.bin and replace original one on my Cubieboard. Am I correct? And next thing is that …

Hi, I have a Cubieboard A80 unused right now, is it possible to build Armbian for this device? It does not seem to be officially supported. Thank you, Terence Haddock

Has anyone been able to get kernel 4.???? to work on an orange Pi Pc?

Hi, thanks for the efforts making armbian very well and very stable for all the distributions, I'm running with a Cubieboard 1 and other arm devices.. I don't want to disturb, but I'll be a headache to support or add in repository this old A10 device Mele A1000/A2000? I know that is old chip, but I'm feel nostalgia, because was one of firsts devices supported in linux-sunxi, and Tom Cubie worked at mele, and sell this litlle joys overseas in 2012, and there are a lot of people now that have this devices too. a lot now sure in the dust and is in mainline kernel also. Tom left Mele, and maked Cubieboard 1, this Mele A1000 I think that have the same configurat…

I tried to run the image build process using Docker. At one point it tries to download the Linux tree and due to my slow Internet connection (max 3MB/s) there seems to be a connection reset from Github due to a too long download time (after 9 minutes, simillar times in 2 attempts). ✗ [ ...........](2.57 MB/s) Downloading linux-complete.git.tar 1.68/3.55 GB 47.34% 9m27s └─ sha256:dd18f1227c9bcf8d3a1c1ecd55721323639550c2845750f59168e17a0d0483bd Error: failed to copy content to /armbian/cache/git-bundles/kernel/linux-complete.git.tar.oras.pull.tmp/linux-complet…

Hi, not sure if this problem is related to Armbian, but in my case it occurs only on an Armian system. I have mainline kernel (4.7.x) running on a Banana Pro. wlan is configured as access point and works without any problems. eth0 is configured as client with static IP. The Banana is running 24/7, but the ethernet port is used only sporadically. The switch where eth0 is connected to is powered down most time. The problem is that eth0 forgets its IP configuration after a while, ifconfig then reports no IP address for eth0. I have to login via wlan and then ifdown/ifup eth0, then it works again. After a couple of hours (I dont know exactly how long), the IP is lost again. …

According to Torvalds github, it seems that Mainline is jumping from 4.20 to 5.0-rc1, there won't be any 4.21 ...

I tried to rebuild the Banana Pi image with kernel 3.19.7 adding the configuration from here to the next config before rebuilding. I get a lot of prompts and I said m for modular or Y for yes to each of them. The tuner still isn't showing up in Tvheadend. I can donate some BTC so you have a test unit to help get this working.

Hello. I try to use waveshare 5inch touchscreen. But, while u-boot, it works. And after starting kernel, there is no output. My image is Armbian_5.90_Orangepipcplus_Ubuntu_xenial_default_3.4.113_desktop.img (ubuntu 16.04) Thank you for any help. This is video:

Build on new kernel (5.1), Ubuntu 18.04. No cpufreq information (0 MHz in htop etc.) also means there's no working frequency scaling. Which for Allwinner H2+ (Banana Pi M2 Zero) means quick hard-hang due to overheating whenever I compile anything non trivial, unless I point a USB Fan on the CPU (which already got a heatsink). Is there any chance of getting cpufreq and dvfs to work?

Hi, Could you please add the usbtv driver ? i have an Easycap with UTV007 chip the driver are not present in kernel 3.4.110-sun8i, and are available from 3.13-rc5 I have try to compile using the standart way, and using dkms with no success. I have also try to install the backported version wget http://www.kernel.org/pub/linux/kernel/projects/backports/stable/v3.18.1/backports-3.18.1-1.tar.xz tar xvfJ backports-3.18.1-1.tar.xz cd backports-3.18.1-1 make menuconfig make ARCH=arm -j4 make install rmmod videobuf2-core rmmod videobuf2-vmalloc rmmod videobuf2_memops modprobe videobuf2_memops modprobe videobuf2-core modprobe videobuf2-vmalloc modprobe usbtv r…

This way it works with 720p or whatever less than 1080p. There kernel logo doesn't want to show. Good on 1280x1024 or 720p Spoiler [ 3.336551] simple-framebuffer 7fb00000.framebuffer: framebuffer at 0x7fb00000, 0x500000 bytes, mapped to 0xf0900000 [ 3.336562] simple-framebuffer 7fb00000.framebuffer: format=x8r8g8b8, mode=1280x1024x32, linelength=5120 [ 3.363471] Console: switching to colour frame buffer device 160x64 [ 3.365113] simple-framebuffer 7fb00000.framebuffer: fb0: simplefb registered Broken on 1080p: Spoiler [ 3.337435] simple-framebuffer 7f817000.framebuffer: framebuffer at 0x7f817000, 0x…

hello, i try to update my armbian and i got this E: Release file for http://security.debian.org/dists/bookworm-security/InRelease is not valid yet (invalid for another 2d 3h 4min 26s). Updates for this repository will not be applied. E: Release file for http://deb.debian.org/debian/dists/bookworm-updates/InRelease is not valid yet (invalid for another 2d 2h 59min 29s). Updates for this repository will not be applied. E: Release file for http://deb.debian.org/debian/dists/bookworm-backports/InRelease is not valid yet (invalid for another 2d 2h 59min 29s). Updates for this repository will not be applied. E: Release file for http://apt.armbian.com/dists/bookworm/InRe…

SEC mode being set for legacy and mainline. Overriding u-boot default of non-sec I've got a patch to make it conditional. just doing a bit more testing cooresponding github issue: https://github.com/igorpecovnik/lib/issues/408 pull request: https://github.com/igorpecovnik/lib/pull/409

Hello, I've got an Orange Pi Zero (Allwinner H2+) and an .img 4GB with OS for it and some custom software in the image. I have source code of this custom software and need to compile its modified version and build/change the .img with my changes, and load it all into the Zero. 7zip opens the .img, I can see that it has Armbian Jessie with legacy kernel. QEmu on Ubuntu coudn't mount the .img, is it possible to emulate the image, or should I modify my software on the device itself? How it could be done? I need some help with development for Zero and an existing .img. Thanks in advance.

Sometimes I get in trouble building a new image. This could be caused by a variety of reasons, e.g an Armbian patch does not work with the latest kernel, a new u-boot version makes trouble or some functionality is broken in the image like the USB and v4.6.1. stuff here: http://forum.armbian.com/index.php/topic/1338-a20-lamobo-r1-kernel-461-usb-issue/ How could I step back to working Armbian main build libraries and a working kernel and stay on both? Will this work? cd lib/ git checkout 2a2e190 # commit form June 1, 2a2e190: Move up to 5.14 since we need to ... cd .. touch .ignore_changes echo "KERNELBRANCH=\"v4.5.6\"" > userpatches/lib.config # add # KERNELT…