Allwinner sunxi
Quick links to search tags:
Banana Pi M4 Zero, BIGTREETECH CB1, Libre Tritium H3, Libre Tritium H5, Olimex Teres A64, Orange Pi One, Orange Pi Zero Plus, Orange Pi Zero 2, Pine64
-
Hi everyone! I'm trying to build my own distribution for the Pine64, and I use armbian as a working reference. I'm able to compile ATF + U-boot + Kernel + rootfs and the board actually boots and I get a console over the serial interface and over HDMI. The problem is that GbE Ethernet does not work. It appears that the 8211 phy is not powered. The good guys on the pine64 IRC pointed to the ATF, where the DC1SW regulator should be turned on in order to power the phy. On armbian everything works just fine. I think I messed up something in the build - wrong version / config / dts in either ATF, U-boot or the linux kernel. …
-
Reputation Points
- 0 replies
- 2.8k views
-
-
Hi I set the DSI format to RGB888. However, looking at the output of DSI seemed to be BGR888 format, why?. About DSI format I confirmed the Allwinner A64 SoC specification, but I did not understand it well. The software and hardware used are as follows. software: Armbian hardware: Pine A64-LTS Thank you.
-
https://www.pine64.org/pinephone/ It gets the same cpu as the pine64. If you have a pine64 can it run common programs like firefox, vlc, libre office, gimp and jitsi? Is the pine64 as fast as the orange pi one?
-
Reputation Points
- 0 replies
- 2.3k views
- 1 follower
-
-
Hi I have Pine64+ with LCD + TouchScreen - all from Pine team. I checked some OS, but only Armbian DE is responsiveness enough for me. Now, Armbian Jessie is on SD card, stable ISO with all updates and upgrades installed - 3.10.107-pine64. Change from HDMI to LCD done by changing pine64_lcd to 'on' in /boot/armbianEnv.txt I add gt9xxf_ts in /etc/modues and restart Pine64. But cursor doesn't move on any touch. I confirm that the gt9xxf_ts module loaded by runing 'lsmod' as root, but this module is used by 0 (nobody). I've checked which event is assigned and I got: cat /proc/bus/input/devices | grep -B 2 -A 8 gt9xxf_ts I: Bus=…
-
Reputation Points
- 0 replies
- 2.9k views
- 1 follower
-
-
Not sure if this has been reported - the usual way of enabling spi overaly "overlays=spi-spidev and param_spidev_spi_bus=x" seems to be broken and when an overlay fails at boot time, it tries to load the base dtb from /.../alllwinner/allwinner/*, note the extra allwinner in the path - so it fails. The pin definitions for the Euler SPI are wrong. When you manage to get both SPIs up. SPI 0 is being enabled as spi1.0 and SPI 1 being enabled as spi0.0. It also fails to merge board neutral ili9341 SPI definition files (at boot time) that has always worked on H3 and H5 boards. To work around for now, use the following ( spi0.dts, spi1.dts) to get the spidev's up …
-
I've been building armbian xenial images for my pine64+ a few times now and it works well. But I would like to switch to bionic if I can. I find it hard to find a good place of documentation for either the 4.x kernel or ubuntu bionic for armbian, specifically for A64/Pine64 boards. If I google, I see tons of forum posts with specific issues, but no coherent overview of any issues with 4.x kernels? And reading through 2-3 years of replies on some threads is a bit much to find the info I need. So what would or wouldn't work on a 4.x kernel on ubuntu bionic? Also, I am confused about who does what, and therefore where to go with problems. How are longsleep or sunxi involved …
-
Reputation Points
- 0 replies
- 3k views
-
-
Hi, I need to set max_loop=128 to boot kernel parameter, I added to the armbianEnv.txt file but value seems zero when I look like that. cat /sys/module/loop/parameters/max_loop How can I modify that parameter? Thanks.
-
Hi all, I'm trying to change access my zero 2 via hostname instead of IP (e.g. https://mypizero2.local/). I've changed the hostname through sudo armbian-config but just cannot connect to it via hostname. Has anyone managed to get this working?
