Allwinner sunxi

Just got my orange pi up and running with armbian jesse and the wifi is working but there is no web browser. I want to install mozilla firefox. I have the latest version on the orange pi but dont know how to install it. any help would be appreciated. I am running the xfce4 desktop. I get a cannot execute binary file: Exec format error when i try to run it

Hi all, Well i am trying to add 2 wireless board and 1 ethernet controler with out successful... The boards that i am trying are: Raspberry 2, BPI-M2 and in some weels Orange Pi Plus. The idea is add : a second ethernet 10/100/1000 to the board (enc28j60 module) one wifi card: http://www.sparklan.com/p2-products-detail.php?PKey=00b4zgTVJUGKMz3D2fh3hT0YqEY5pUo0Vq2M_xYD&WUBR-508N%20Module%20Series other wifi card: http://es.aliexpress.com/store/product/VIA-VNT9271-USB-Embedded-WLAN-Module/213061_633552912.html?storeId=213061 1. In the begining i try connect the ethernet enc28j60 module to the SPI, but in the banana sucks (http://lists.infrade...ary/2299…

Hi All I am not able to run Armbian Buster from the Downloads page (https://www.armbian.com/cubietruck/) on the CT board. Other images run fine, including: - Armbian_5.65_Cubietruck_Debian_stretch_next_4.14.78 (from archive) - Armbian_5.65_Cubietruck_Ubuntu_bionic_next_4.14.78 (from archive) - openwrt-19.07.7-sunxi-cortexa7-sun7i-a20-cubietruck-squashfs-sdcard.img.gz (from OpenWrt downloads site) The problem is that it endlessly reboots after resetting the CPU. The output from the serial port is shown below. I can interrupt the Autoboot and get to the Uboot console ok. The output from printenv is also shown below. Any…

I just noticed there isn't a i2s/i2s0 overlay for the mainline kernel series: Linux orangepipcplus 4.14.78-sunxi #412 SMP Fri Oct 26 11:37:04 CEST 2018 armv7l GNU/Linux https://github.com/armbian/sunxi-DT-overlays/tree/master/sun8i-h3 Is it a simple matter of just adding some text files for DT? Or was i2s intentionally left out because or some conflict for example? (I had good luck with legacy on Banana Pi Pro a long time ago with fex, so I'm guessing it's a unintended omission?)

The following message is logged when you start using the following versions of the vanilla kernel debian jessie and get stuck. [ TIME ] Timed out waiting for device dev-ttyS0.device. [ DEPEND ] Denpendency failed for Serial Getty ono ttyS0. 4.3 and 4.5 install to the SD card by entering the same State. legacy kernel even experiencing the same symptoms and can't get to the login prompt. What should I do?

Hello everyone activating legend movie MPlayer vdpau? banana pi m1

have there been more changes for Desktop recently except the repos? Yesterday I have updated and tried to compile, noticed that the function "fetch_from_github" was gone (replaced by "fetch_from_repo"?). After I changed my script accordingly I was able to compile, but the desktop doesn't come up any more. It looks like "fbturbo" module is completely missing? I don't see any reference to this in the logs; where should it be so I can try to debug?

Hi Just got my first Orange Pi Zero today. Everything looking good, with the exception, if I run iperf tests between this and a linux host, the Orange Pi Zero will reboot without any error messages. I changed my power supply to a wall plug which can support 2.4amp easily, also tried to tune down the frequency to 900Mhz max, 4 cores, turned off HDMI/GPU, USB. DRAM is at minimum, 408 I think. Temperature remains at 55 to 58C Still once a while during heavy network, the board will reboot. The image i used is the legacy image posted on orange pi zero, Armbian_5.24_Orangepizero_Debian_jessie_3.4.113 Thanks Jerry

Hi there, Recently you helped me to setup a WiFI AP on Armbian and a bananapim2p board: https://forum.armbian.com/index.php/topic/2395-access-point-mode-with-ap6212-on-armbian-521/ The current problem I am facing: the dhd module on armbian 5.25 does not on my bananapim2p boards. To be precise: I have one bananapi m2p where the dhd module loads perfectly on armbian 5.25, I created an image of this board's emmc and flashed the emmc of two different m2p boards. The dhd config file looks like: cat /etc/modprobe.d$ cat /etc/modprobe.d/dhd.conf options dhd op_mode=2 firmware_path=/lib/firmware/ap6212/fw_bcm43438a0_apsta.bin With the modprobe configuration the m2p board…

I'm on a years old Orange pi zero H2, an often forgotten single purpose print/scan server board. So i want to upgrade to the latest kernel via armbian-config->system->other(switch kernel). Previously its on 4.19. so when i tried to change to current 5.8.16, 5.8.14, 5.8.12 & 5.8.5, i got "No end-user support: unsupported (stretch) userspace!" it has taken me an hours plus just switching kernel, hoping to find the supported ones. though i dont mind unsupported / legacy kernel, i still prefer the latest supported ones. Is any of the kernel on the list supported? if there none on the list, is there a way to add a supported kernel?…

Hello igor! Thank you. The last build 3.0 jessie with kernel 4.0.4 works fine. But i had some problem with first boot after installation. After i try to change password for root bpi drop connection and after reconnection password still was 1234. I tried about 5 times. I had to reboot bpi with disconnect power and after reboot i was able to change password normally.

Good evening, I ran into some problems with sbc-bench on a couple of Allwinner boards Orange Pi Zero, Orange Pi Zero+, Orange Pi One and Nanopi Neo 2 spcifically. The 7 Zip benchmark causes the following error: ./sbc-bench.sh: Zeile 611: 4206 Bus-Zugriffsfehler "${SevenZip}" b >> ${TempLog} Most likely due to a problem with the ZRam: zram: Decompression failed! err=-22 This happens on all boards under Debian and focal with different SD cards and power supplies. The benchmark ran previously on this setups without any issues – unfortunately I don’t know when it stopped working and hence cannot narrow do…

Hi all, Running Armbian Ubuntu 18.04 with stock neo2 4.19.20 kernel I tried installing https://github.com/friendlyarm/WiringNP but after installation `gpio readall` says : "This NanoPi model is currently not supported." However all the wiki's and the Github page says it's supported.......? I can see GPIO in the sys fs at /sys/class/gpio/ but I was hoping to have an easier time with it than manually exporting each pin and calculating offsets for pins with scraps of info online etc. Objective 1: Read a high/low 3.3v/0v status from a GPIO Objective 2: Read an analog voltage, using an ADC. Does the H5 include an ADC? When I look i…

Hi all, Orange Pi One Armbian_20.02.0-rc1_Orangepione_bionic_current_5.4.14 Enable w1-gpio /boot/ambianEnv.txt: overlays=w1-gpio param_w1_pin=PD14 param_w1_pin_int_pullup=1 dmesg | grep -E 'w1|wire' [ 5.271798] Driver for 1-wire Dallas network protocol. [ 5.304021] gpio-110 (onewire@0): enforced open drain please flag it properly in DT/ACPI DSDT/board file What and where else needs to be done?

Hi, I need to use the GPIO of the orange pi, is there a library that i can use to program my aplications in java or python? Is pi4j an good option? Can i use it with orange pi plus 2?

With a little shell script I can switch gpio6 on/off: #!/bin/sh # PWM1 / GPIOA6 P=6 G="/sys/class/gpio/gpio${P}" if [ ! -d "${G}" ]; then echo "Exporting GPIO${P}" echo ${P} > /sys/class/gpio/export echo out > ${G}/direction fi i=100 while [ "$i" -gt 0 ]; do i=`expr $i - 1` sleep .2 echo 1 > ${G}/value sleep .1 echo 0 > ${G}/value done if [ -d "${G}" ]; then echo "Unexporting GPIO${P}" echo ${P} > /sys/class/gpio/unexport fi but I dont see anything which could enable PWM on this pin: root@nanopineo:~# ll /sys/class/gpio/gpio6/ total 0 -rw-r--r-- 1 root root 4096 Feb 21 11:38 active_low lrwxrwxrwx 1 root root 0 Feb 21 11:38 …

Hello, I'm running rsync to backup a VPS to an USB hard drive on the neo2 and sometimes rsync just stops with "read error from input device (I/O error)". I believe this issue happens when rsync is causing high load in the USB disk, writing or removing a large number of files or trying to write a big file. Notes: The hard drive is on a self powered enclosure - so power failure is not really an option here I also have Apache and mariadb storing data on the USB disk and I never had this kind of I/O errors with it OS: Debian GNU/Linux 9.4 (stretch) Drive is ext4 Whenever rysnc stops I get this under /var/log/messages:…

The Luma library allows you to display text, graphics, animation, etc. on multiple display types. Here I will describe the easiest one to configure which is Luma.OLED and the I2C version of the SSD1306. You can find these displays on EBay and Amazon for less than $10 US each (you can get them for less than $3 US if you order from China, but it might not show up). I've configured Luma on many SBCs and it's my go to library if I need a small display for projects. Requirements NanoPi Duo (I used V1.0 board with 512 MB RAM) flashed with Armbian image. This will work with or without the mini shield. Small nylon nuts, bolts and standoffs if y…

I had to freeze my device on Kernel 6.1.92 & Bullseye to remain operational. Now trying to update/upgrade to Kernel 6.6.nn I run into following probs: 1) Using Armbian-config defreeze and subsequently switch to kernel 6.6.nn works OK 4me, but subsequent apt-get update/upgrade throws me back to kernel 6.1.104. Armbian-config has changed significantly w/ No other Kernel available. 2) Using Armbian-config defreeze, only and going directly to apt-get update/upgrade throws me back to kernel 6.1.104 as well and from Bullseye back to Buster! Its a mess! Will this eventually be corrected and when? RGDS

Hi Igor! I'm running your Image on BananaPi and BananaPro and I want to use the 7" Lemaker LCD... Image-Version: 3.2 Kernel 3.4.108 Wheezy How do I switch the script.bin-file? Do I have to change the symbolic link like: ln -s /boot/bin/bananapipro.bin /boot/script.bin In /boot/bin are all script.bin files, but the filesize of the BananaPro BIN-files are identical: 50516 bananapi.bin 50580 bananapilcd7.bin 50612 bananapipro.bin 50612 bananapiprolcd7.bin The original BIN-files from Lemaker have a different size too: 50972 banana_pi_7lcd.bin 50564 banana_pro_7lcd.bin Did you make any changes in the BIN-files? Can I use the BIN-Files …

Hi all, I need a help. I installed the armbian Debian Jessie 4.9.5 in my cubietruck. It is connected via HDMI. How do I set the output of sound to be HDMI? Thanks and best regards

Hi, I'm using Nanopi DUO2 for few IoT projects. Using the microUSB serial console connection is very convenient and fast method to manage this SBC. Unfortunately with latest version of Armbian (tested with v24.11.0) it not working any more. Version 23.11.1 works fine out from the box, but after sudo apt update && sudo apt full-upgrade the microUSB serial console is not available. Any suggestion how to switch it back will be very appreciated. Slawek

I did manage to use the rmbian_5.27_Orangepizeroplus2-h5_Debian_jessie_dev_4.11.0.img.xz image and things boot fine. I also get pretty console on hdmi. But no network, and I don't have a way to get the keyboard on. Any suggestions on what kind of an adapter I need to get power AND usb keyboard to the thing (since there are no extra ports on it)? Or is it serial? Good recommendation on proper 'converter". I did modify the initial armbian_first_boot to enable wifi with proper ssid / password, and even enabled static, but no dice. Thomas

I thought I had this mastered but I cannot get the OPI to boot. I downloaded the current legacy image trusty, use 7zip to unzip it and then use a image writer to write the image to the SD formatted sd card. Am I missing something here? Sent from my SAMSUNG-SM-G900A using Tapatalk

Hey folks! On monday I was able to fix the overscanning issue of my Orange Pi zero (read here). Because fiddling around with the register values can be pretty harsh some times I decided to created a small programm to move the picture of the composite video output. You can find the project page here: https://projects.nwrk.biz/projects/allwinner-tvout With this tool you can easily move the picture relative to its actual position by just calling : $ sudo tvout -m -x <value in px> -y <value in px> To reset the position you can use: $ sudo tvout -r I hope some of you may find this useful. If I have enoug…

Hello, How can I play a video on the TV without a GUI/X11 installed? When I try mpv it says: mpv 05\ Oscillofun.mp4 [input/#1] Failed to read LIRC config file ~/.lircrc. Playing: 05 Oscillofun.mp4 [stream] Video (+) --vid=1 (*) (h264) [stream] Audio (+) --aid=1 --alang=und (*) (aac) File tags: major_brand: mp42 minor_version: 512 compatible_brands: isomiso2avc1mp41 creation_time: 2016-11-10 13:22:28 date: 2014-07-02T13:04:18+0200 encoder: HandBrake 0.10.5 2016021100 [vo/vdpau/x11] couldn't open the X11 display ()! Error opening/initializing the selected video_out (-vo) device. Video: no video AO: [alsa] 44100Hz stereo 2ch float A: 00:00:01 / 00:02:31 (1%) E…

Dear All, first of all, i dont have any orange pi yet, want to have one, perhaps orange pi PC Plus. My main intention is to use as robotic experiment. i have some questions: - is orange pc plus GPIO compatible with raspberry one ? - does shield / module for raspberry works in Orange Pi ? - example : if i want to use "Pimoroni Explorer HAT Pro for Raspberry Pi", can it work in orange pi ? sorry if these euqestion existed before and sorry if wrong forum. thanks.

Hello all, I'm going to preface by saying that I am not experienced with Pi, Pi clones, or linux, but I know how to google stuff until my fingers bleed and can navigate around a terminal window well enough. I have an Orange Pi Lite, which is running OctoPrint primarily, but does use a few other uses. I am using a prepared Armbian image file. Upon SSH login in the terminal displays the following: Welcome to ARMBIAN Debian GNU/Linux 8 (jessie) 3.4.113-sun8i System load: 3.17 Up time: 39 min Memory usage: 72 % of 494Mb IP: 192.168.0.250 CPU temp: 36°C Usage of /: 99% of 3.6G storage/: 1% of 3.8G CPU is a…

used your script to make rootfs on SATA device but it doesn't boot up. I just modified your script: if [[ $KERNEL == *"3.4"* ]]; then sed -e 's,root=\/dev\/mmcblk0p1,root=/dev/'"$DESTPART"',g' -i /boot/boot.cmd mkimage -C none -A arm -T script -d /boot/boot.cmd /boot/boot.scr else sed -e 's,root=\/dev\/mmcblk0p1,root=/dev/'"$DESTPART"',g' -i /boot/uEnv.txt sed -e 's,root=\/dev\/mmcblk0p1,root=/dev/'"$DESTPART"',g' -i /boot/boot.cmd if [ -f /boot/boot.cmd ]; then mkimage -C none -A arm -T script -d /boot/boot.cmd /boot/boot.scr fi fi …

Debian GNU/Linux 9 orangepizero ttyS0 orangepizero login: root Password: Last login: Tue May 8 23:46:23 UTC 2018 on ttyS0 ___ ____ _ _____ / _ \ _ __ __ _ _ __ __ _ ___ | _ \(_) |__ /___ _ __ ___ | | | | '__/ _` | '_ \ / _` |/ _ \ | |_) | | / // _ \ '__/ _ \ | |_| | | | (_| | | | | (_| | __/ | __/| | / /| __/ | | (_) | \___/|_| \__,_|_| |_|\__, |\___| |_| |_| /____\___|_| \___/ |___/ Welcome to ARMBIAN 5.44.180506 nightly Debian GNU/Linux 9 (stretch) 4.14.39-sunxi System load: 0.08 0.17 0.08 Up time: 3 min Memory usage: 17 % of 240MB IP: 192.…

I have had similar issues what somebody had on this forum but I cannot post reply because the topic is closed. But I found solution. You need to downgrade u-boot with following commands. For Olimex Micro: apt-get install linux-u-boot-next-micro=5.60 Tested on ARMBIAN 5.60 stable Ubuntu 18.04.3 LTS 4.19.84-sunxi For Olimex Lime2: apt-get install linux-u-boot-lime2-emmc-next=5.30 Tested on Ubuntu Bionic with Armbian Linux 4.19.81-sunxi

Hello everyone! Yesterday I downloaded "Armbian 23.5 Jammy". Unfortunately the integrated wifi module does not work. I tried several alternatives but with the same problem. I am not an expert on the subject. Any solution? I'm trying to compile and in one of the steps it tells me that the "Orange Pi 3 LTS - H6" is no longer supported. If anyone knows and can help would be appreciated. https://paste.armbian.com/varepekose Original: Hola a todos! En el dia de ayer descargue "Armbian 23.5 Jammy". Lamentablemente no funciona el modulo wifi integrado. Probe con varias alternativas pero con el mismo problema. …

Hello I tried to install xrdp in opi one,but it doesn't work.

Hello, I have downloaded and installed Armbian Buster mainline based kernel 4.19.y & Armbian Bionic mainline based kernel 4.19.y from https://www.armbian.com/nanopi-neo-air/ With both versions I have the same problem: WiFi is not working at all ! Before the installation I was running the Friendlyarm factory image and had no problems with WiFi. As I have no internet connection, I can not upload the ArmbianMonitor log. Running this gives no errors. root@nanopiair:~# armbianmonitor -v Starting package integrity check. This might take some time. Be patient please.. . It appears you don't have any corrupt files or packages! …

From Zadors reply to I learned there is a Video Engine for Video, Mali for 3d and a Display Engine for 2d. I used an old version of armbian on OPi PC (h3disp had no 4k option) . Moving desktop windows was very fast. In current desktop release legacy 3.4.113 moving large windows is very slow. So I guess Display Engine is not working correctly. How can I determine if it works? Mainline version gives me no display at all. Thanks.

Hello, I've got two WaveShare HDMI LCDs: 7inch HDMI LCD (C), 1024x600 10.1inch HDMI LCD (B), 1280x800 Has anybody managed to configure them for the Banana (with Armbian legacy kernel)? The company WaveShare provides a Raspbian image that works okay (screen and touch). I used fbset to figure out the current settings while running the provided Raspbian image: 7inch: mode "1024x600-43" # D: 32.000 MHz, H: 27.778 kHz, V: 43.066 Hz geometry 1024 600 1024 1200 32 timings 31250 40 40 29 13 48 3 rgba 8/16,8/8,8/0,8/24 endmode 10inch: …

How to connect the mcp251x driver on the OrangePI PC? I make new kernel (Debian 8.7 (jessie)) with can-bus modules and mcp251x module. Has connected MCP2515 according to the following scheme. GND (PIN30 OPI) ---> GND MCP2515 VCC+5V (PIN2 OPI ---> VCC MCP2515 PC00 (PIN19 OPI) ---> SI MCP2515 PC01 (PIN21 OPI) ---> SO MCP2515 PC02 (PIN23 OPI) ---> SCK MCP2515 CE00 (PIN24 OPI) ---> CS MCP2515 PA20 (PIN37 OPI) ---> INT MCP2515 All modules are loaded, but the can0 device doesn't appear. modprobe can modprobe can-dev modprobe can-bcm modprobe can-gw modbrobe mcp251x

Hi, Using orange pi pc with armbian 5.05 jessie server image. Everything worked fine for few days, until recently when usb device started disconnecting on its own: Mar 24 19:58:02 localhost mtp-probe: checking bus 7, device 90: "/sys/devices/platform/sunxi-ohci.3/usb7/7-1" Mar 24 19:58:02 localhost mtp-probe: bus: 7, device: 90 was not an MTP device Mar 24 19:58:03 localhost kernel: [ 592.325419] usb 7-1: USB disconnect, device number 90 Mar 24 19:58:03 localhost kernel: [ 592.332823] ch341-uart ttyUSB0: ch341-uart converter now disconnected from ttyUSB0 Mar 24 19:58:03 localhost kernel: [ 592.339829] ch341 7-1:1.0: device disconnected Mar 24 19:58:03 localhost k…

Sorry for the minimal info provided in this report but, due to the possible data corruption which the bug may cause, I'm not willing to reproduce this again on my board which runs in production. One week ago, I experienced data corruption happening on the nanopi. Actually it was some time (more than one month) that I saw the board acting weird: - long ssh transfers would sometime brake (via https://github.com/dooblem/bsync) - `apt update` reported invalid keys for the official armbian repository - on rare occasions, the board would freeze (not respond to ssh, requiring manual power cycle) After experiencing data corruption, I …

First off, I'd like to thank the maintainers for all the work you've put into Armbian. It's really been a pleasure to use. I'm currently using an OrangePI 2+as a kiosk computer, and I'm wondering if there might be some other way to wake it from sleep other than pressing the power button. Would it be possible for it to wake from sleep if one of the GPIO pins were pulled high, for instance? TIA, -Jim

I have Orange Pi Zero and use mailine kernel v4.11.12 as Jessie Debian. I have seen in specification OPI zero memory SDRAM 256/512MB DDR3 (shared with GPU) because I don't use GPU memory how to split memory between RAM and GPU like in Raspberry Pi I can do this in raspbian-config and set 16 Mb for GPU. Is it possible on ARMBian ???

I configured Armbian on a mSD card and decided to try and move it to the eMMC. I used the nand-sata-install utility, All files from the mSD card are copied, and the last step fails. I get Error: no u-boot package found, exiting Any pointers?

Hi, when I connect my external HDD - an Icy Box IB-RD2253-U31 (http://www.raidsonic.de/products/external_cases/soho_raid/index_en.php?we_objectID=3239) - to my Bananapi M1, running ARMBIAN 5.31 (stable Debian GNU/Linux 8 (jessie) 4.11.6-sunxi) the hard disk is not found. This is regardless of the HDD setup chosen, at least I tried with the two disks inside configured as JBOD as well as RAID1. After connecting the USB HDD, dmesg doesnt show any output, lsblk doesnt show it. Is there anything I can do about it to get it working, is it a firmware issue?

(Finally this forum lets me enter a new topic. It's failing most of the time, making it really hard to solve my actual problem if the infrastructure also fails.) I'm using an Orange Pi Zero board and try to make it talk to a radio module via SPI. The whole thing already works on a Raspberry Pi so the module and cabling is correct. But the module doesn't respond to requests on the Orange Pi. Since this doesn't do anything, I searched for issues like this and along the way found an SPI loopback tool. I tried it and it returned all zeros. The tool readme suggests that the MOSI and MISO pins are not connected, but they are. I checked and resoldered those pins and …

I have no need at all for the built in wireless on an Orange Pi Zero board. Is there a way I can disable it entirely to save power? Through the DT or some other means? Thanks!

Hello all! Does anybody know how to make 5inch hdmi screen for RPI work with OrangePi One? When I try to connect it to my OPI one with armbian it is just white screen and no one of LEDs is lighting on the OrangePI PCB.

I need help. I builded image Armbian_5.67_Orangepiwin_Ubuntu_bionic_next_4.14.81_desktop. Ethernet don't work. Wi-Fi is Ok. When I tested image Armbian_5.59_Orangepiwin_Ubuntu_xenial_default_3.10.107_desktop Ethernet and Wi-Fi worked on the same board. armbianmonitor -u System diagnosis information will now be uploaded to sysctl: permission denied on key 'vm.mmap_rnd_bits' sysctl: permission denied on key 'vm.mmap_rnd_compat_bits' sysctl: permission denied on key 'vm.stat_refresh' http://ix.io/1s78

Hi, is there currently support for NVMe storage in Armbian trunk? I tried to flash the latest build, added nvme ssd storage - but it is not seen in the system. What to check?

Hi Guys, I bought one of these pcDuino 4 (Nano Pi M1) boards: http://www.linksprite.com/pcduino4-nano/ Works great with Armbian Legacy Kernal. I got this screen with the HDMI + DSI Driver Board. Works fine with normal PC -> HDMI output but will not work with the Nano Pi.. https://www.alibaba.com/product-detail/LS055R1SX04-1440x2560-5-5-2K-LCD_60672828148.html?spm=a2700.7724838.2017115.1.3c93b095HGc0XS The LCD screen just turns on then off and on and off forever. It never locks on to the HDMI signal. The Nano Pi M1 works just fine with a regular monitor but not with the LCD/Driver combo. I have seen some purple images come up on …

Hey guys, I was wondering why the Browsers doesnt support H/W Acceleration, now i found out its because the Mali Driver is outdated. I installed also Chromium and forced it to use the GPU, well at least it trys but i got a bunch of errors. Is there a way to add a new Driver? Tried also to compile it myself but i was never that deep into linux and never had to compile drivers, here are the sources: http://malideveloper.arm.com/resources/drivers/open-source-mali-utgard-gpu-linux-kernel-drivers/ I think the current Kernel uses a horrible outdated r3p0 Version and a new one is r7p0, at least r4p0 is needed which should work with Chromium and finally add H/W Accelerat…

I use "./compile.sh BRANCH=default BOARD=orangepilite KERNEL_ONLY=no PROGRESS_DISPLAY=plain RELEASE=xenial" to build the whole booting image for my orangepi lite, it works very good as the official prebuilt armbian image. Here, the usb otg port seems configured as peripheral mode already( g_searial module works as gadget in fact), I can use it as usb seraial well. However, I want to make it works as a usb storage, so, I though the g_mass_storage was the right module. I loaded it using following command: insmode g_mass_storage.ko file=/dev/mmcblk0p1 removable=1 then, I got kernel message like: [ 194.842091] usb open ba…

Hey,I'm using Lg 19M38A 18.5 inch monitor .when I plug in my orange pi , only monitor shows the booting process and then the black screen up .how can I fix this problem?

Hi all, I am new to this forum. I just got a Orange Pi plus 2E. The specs are nice and the price is competitive. However, I don't seem to find an image with gpu working well. No hardware acceleration available. This means I cannot use chrome properly / watch videos / play web games with WebGL. From armbian website / logs: Mali OpenGL ES does not work on H3 boards with 2GB RAM (Orange Pi Plus 2, Orange Pi Plus 2e) Any idea when will the Mali driver work on 2GB RAM models? The OPi is nowhere near usable right now. Thanks!

After a (sudo) poweroff, the ethernet port leds turn off, the usb sockets' power supply too, but the green led remains on. I would like the green led to turn off after a sudo poweroff. How can I do that? What's the best way to do it? It's an Orange Pi PC with ARMBIAN 5.60 stable Debian GNU/Linux 8 (jessie) 3.4.113-sun8i Thanks.

Dear All, I need to install a MongoDB due to install unifi controller. Base on the documatation (UniFi - How to Install & Update via APT on Debian or Ubuntu) version 2.9.10 is recommend . You can find the latest installation guide for Ubuntu here, and Debian here. Both does not work. I've got the following error message when performing "apt-get update", I now this is the MonoDB version 3.4, but I got the same message on the recommended version. To be honest, I'm not a debian expert :-( Thank you for your assistance BR Patrick

I have a BananaPi running 4.2 (with Wheezy) and I am getting poor network speed. When testing download a file from the internet, I am averaging ~500k/s. I have another BananaPi running 3.4 (also with Wheezy) and on that board, I am averaging ~3MB/s downloading the same file from the same location. I tested this multiple times and the results are pretty much the same. Any idea why network performance is so poor on 4.2? Thanks.

Hello, First of all, I'm new on Armbian I got some a stack dump on the console and can see following messages on kernel.log : --- Oct 24 14:27:28 localhost kernel: [183195.142242] 8<--- cut here --- Oct 24 14:27:28 localhost kernel: [183195.152222] Unable to handle kernel paging request at virtual address 2f68f25c Oct 24 14:27:28 localhost kernel: [183195.167942] pgd = 36f6b267 Oct 24 14:27:28 localhost kernel: [183195.179169] [2f68f25c] *pgd=00000000 Oct 24 14:27:28 localhost kernel: [183195.191263] Internal error: Oops: 805 [#1] SMP THUMB2 Oct 24 14:27:29 localhost kernel: [183195.204864] Modules linked in: brcmfmac brcmut…

Hi, I bought brand new Waveshare 3.5 inch (A) RPI touch screen and also a opi lite but I have got problem with installing the lcd on my pi , when I plug it in it show me only white back light please help me ( my os is raspbian).

Hi, I have been running Armbian on OrangePi Lite for more than a year just fine. Then I decided to upgrade and flashed the latest version. Now with the latest version the device looses wifi every few days no matter which wifi device I use. In order to investigate I have plugged additional USB wifi. Some time both wifi work. Then built-in may disconnect and stop working, but USB keeps working. Or vice versa, USB stops working, but the built in keeps working. I have been able to send syslog to an external machine and here what it showed Connection works fine: The next day one of the connections stops working and…

I'm trying, with no success, to make a 3,5 inch tft lcd screen function with an orange pi zero plus (h5) via SPI. I will love if someone could help me diagnose the reason why I'm failing in doing so. The screen in question is a WaveShare knockoff -> link (the pinout can be found at the bottom of the page.) I'm running Armbian buster 5.92 with the kernel 4.19.63 and all packages upgraded. I also have a working serial connection (using the UART pins located next to Ethernet jack on the board) and am using the 'screen' program to communicate with the device. When connecting the screen and turning on the board the leds on the screen turn…

Hello every one, My first post here i'll try to be clear but english is not my mother langage. I bought a couple of opi zero with usb expansion board and a case. I needed small devices able to run a linux daemon and control a bluetooth LE device. They are used as antennas in a bluetooth mesh network. The orange pi zero seemed to be a good choice. I first installed the opizero with armbian 5.24 debian version. Unfortunately I was unable to use bluepy lib. It was the same with the xenial version. Another user of the bluetooth advertisement plugin told me to use last firmware (5.25) and upgrade to 4.x kernel. I was then able to use bluepy lib. I moved the opi zeros …

Hello everyone, I have purchased an OPI PC + with intent to use it as a reciever for OGN, a network of recievers used for monitoring FLARM position info of equiped aircraft. http://wiki.glidernet.org/ I have flashed the Legacy 3.4.112 Jessie Desktop image first to the sd card and then installed it to the internal memory of the device. All went smoothly thus far. Then I ran into the problem that is the reason I am posting this thread. When I ran the bootscript for the installation of the OGN software, I got the following error message in the console: Bootscript source: http://ognconfig.onglide.com/ root@orangepipcplus:/home/andrej# wget http://ognconfig.…

I have a Banana PI M1+ with latest Armbian Jessie with 3.4.109 kernel. The dmesg contains many rows like this ones ... [ 1468.309084] Loading kernel module for a network device with CAP_SYS_MODULE (deprecated). Use CAP_NET_ADMIN and alias netdev- instead. ... ... [ 2779.128724] Loading kernel module for a network device with CAP_SYS_MODULE (deprecated). Use CAP_NET_ADMIN and alias netdev- instead. ... I tried to search on Google without success. Can someone help me please? Thanks.

Board NEO2 with Armbian Stretch mainline kernel 4.19.y many errors: info:xxxxx[3087]::2019-01-30T10:19:10.607956+00:00: /usr/sbin/xxxxx: error while loading shared libraries: libsystemd.so.0: cannot open shared object file: No such file or directory info:xxxxx[3093]::2019-01-30T10:19:20.857869+00:00: /usr/sbin/xxxxx: error while loading shared libraries: libsystemd.so.0: cannot open shared object file: No such file or directory info:xxxxx[3097]::2019-01-30T10:19:31.114980+00:00: /usr/sbin/xxxxx: error while loading shared libraries: libsystemd.so.0: cannot open shared object file: No such file or directory info:xxxxx[3106]::2019-01-30T10:19:41.3579…

Hi. I'm a new user. I have a Banana PI M1+, that is connected to a monitor with maximum resolution of 1280x1024 and with only DVI port. I'm using Armbian_4.5_Bananapi_Debian_jessie_3.4.109, and I installed XFCE using tasksel. If I leave it without any user interaction, the monitor goes to sleep, and I'm not able to wake it up anymore. But it works, because I'm able to connect to it using putty from another computer. So I tried to install Armbian_4.5_Bananapi_Debian_jessie_3.4.109, but I have the same problem. I tried also to disable "Switch Off After" in the Display section of power management without success. Can someone help me please?

Hi Guyzz Just got a OPI1 (H3 512MB), and was trying out the stretch image from here https://www.armbian.com/orange-pi-one/ https://dl.armbian.com/orangepione/Debian_stretch_next.7z It won't boot It starts up , w. both Orange & Green leds on lan , then i can see it requests a dhcp address , and it gets one (req/offer runs many times), then nothing happens after that. Just - Green light blinks on lan , Orange is unlit. I tried to write (linux dd) it on 2 different SD-cards , a 8GB Intenso , and also a 16GB Sandisk - same behaviour. I grabbed the latest Jessie from the archive , and wrote it to the Intenso 8GB , and it booted fine w. jessie. I don't mind…

Hello does someone have the working configuration enabling the onewire master bus on the mainline version ? I have tried to gather the information from several posts adding the missing configuration on the devicetree but as there is no real step by step guide and the kernel wiki entry makes no sense for the zero`s pins. Overlay or straight settings into the boot configuration.

I can't get the LeMaker 5in LCD working with Armbian 5.04 legacy on LeMaker BananaPro. First things first: # uname -a Linux bpi2 3.4.110-sun7i #12 SMP PREEMPT Tue Mar 1 08:39:29 CET 2016 armv7l GNU/Linux # lsmod Module Size Used by cpufreq_userspace 3524 0 ft5x_ts 44223 0 spidev 6366 0 ap6211 624553 0 a20_tp 3365 0 8021q 18593 0 garp 6072 1 8021q stp 2032 1 garp llc 5365 2 stp,garp # dmesg [ 6.514195] ===========================ft5x_ts_init===================== [ 6.520934] ctp_fetch…

Hi, I have a Cubietruck with ARMBIAN Ubuntu 14.04.4 LTS 3.4.110-sun7i. I now want to use the Hardware acceleration for encryption. But I'm not able to do this and i have not found a lot of Information. I should load the sun4i_ss Kernel module, but i'm not able to find this on my cubietruck. Do I have to install an additional Package or do i have to compile the module by myself? By now my encryption is working by software: $ cat /proc/crypto name : ecb(arc4) driver : ecb(arc4-generic) module : kernel priority : 0 refcnt : 1 selftest : passed type : blkcipher blocksize : 1 min keysize : 1 max keysize : 256 ivsize : 0 g…

Hello, i have this strange problem after upgrade to kernel 3.4.113-sun8i (orange pi plus 2e, debian server version armbian, Seagate BarraCuda 2TB sata hdd, connect with axagon usb3 to sata adapter and set standby after 30min, power by power adapter). Before update, all working fine. Now, after kernel update, drive never stop spinning. I stopped rpimonitor and smartd services and still dont work. If I use hdparm -Y /dev/disk/by-uuid/... then drive spindown but after som second start spinning again. How can i solve this? this is my syslog Oct 5 11:36:21 localhost kernel: [ 1450.160126] usb 4-1: reset high-speed USB device number 3 using sunxi-ehci Oct …

Hello, I need help for my Orange Pi Plus2, i have found a Ubuntu 15.10 (Wily) *.img that works on my board. Ubuntu_wily_mini.img.xz https://mega.nz/#F!wh8l2BjK!OBep3nMldBletvNNwkH2Jg Also installed on my board but i have a problem there are no drivers for the ethernet (Lan / W-Lan) clould someone help me to compile this image with the right drivers. Please note i dont want a desktop interface only the server version of ubuntu. Thanks a lot.

Hi, I am having a hard time getting Armbian to boot on my Cubietruck. I have recorded some serial output but it does not show anything helpfull (at least for me). It just stopps at "Starting kernel". Verbosity is set to 7. Serial output 21.02.3 https://pastebin.com/DMWRzTgn Serial output 21.02.1 https://pastebin.com/a9Hasywc I tried the same SD-card and power supply with Arch for ARM. Arch boots fine. Serial output Arch Linux: https://pastebin.com/bMPf3gfx What further options do I have to debug this? As I am not really familiar with Arch I'd rather run a Debian / Ubuntu based OS. Best regards, Albert

When I ssh to my Banana Pi (I / A20) there is a delay of a few seconds till welcome screen / prompt. With Bananian it was instant as still is with second BananaPi with Bananian and all other kind of Pis I have, rock64 with Bananian no delay also, but faster cpu off course. Tried ssh -vvvv and a look at sshd logs, didn't found something indicating an error yet.

Hi, im trying to get Armbian for Orange Pi Zero (512). I only have ethernet with a router to SSH. No serial to USB. - If I try the stable Ubuntu version It powers on with solid Green LED. - ~1min later Red LED starts blinking (pulse-pulse-stop) in a cycle and nothing happens. There is no discovered device on local net. So i cannot SSH. - If I try debian stable release device is shown on net as orangepi.home. or something like that but if I try ti SSH -> timeout error. Ping doesn't work at all. I have tried other distros like Pulpstone and OpenWRT which work loke a charm but not Debian based. I tried redownload…

Hi Yesterday I've upgraded armbian kernel from 20.11.3 to 20.11.6 version in the available updates with apt update. Once PiPC restarted no wifi connection was found. The wifi dongle is a TP-LINK TL-WN725N and is found with lsusb: Bus 004 Device 002: ID 0bda:8179 Realtek Semiconductor Corp. RTL8188EUS 802.11n Wireless Network Adapter It was working with previous kernels but with 20.11.6 kernel is not listed in ifconfig so I've rolled back to 20.11.3 kernel Any hints or solucions ?? Thanks

Hello, I am going to make a project using OrangePi (most likely OrangePi Lite, but could be other model) with a camera. So, there is my supplication, for someone to make a test and check HOW MANY pictures (let's say 640x480) can the camera take PER ONE SECOND (working continuously, in a loop)? I am interested in both types of cameras: a USB webcam and OrangePi CAM module. And it's about taking pictures, not a movie. By the way - it is possible to take pictures into RAM? I mean not writing it to SD card. It would improve performance :-) Thanks to everyone in advance!

Hi again guys, I buy some usb wireless boards to connect to the GPIO with the UART Pines, but in the especifications of the GPIO, only i see 1: Has you can see only GPIO 14 and 15 have TXD and RXD... I will use too the SPI to add other ethernet so... its possible use other GPIO for TXD and RXD?? In my Pixhawk (board for drones) i use I2C for monitoring stats via wireless (2.4Ghz), maybe this pines can work for usb wireless. If is possible, how can i program other pines for that? will be any diference? (more slow or more cpu resources or whatever?) Thanks like always!

Hello, I have recently installed Armbian 5.20 server which was the recommended os for this board. I have T230C DVB-T/2 tuner which is not recognized by the system by default. I need to build and install media_build by CrazyCat: https://bitbucket.org/CrazyCat/media_build I have managed to build and install the repository with the required firmware in Ubuntu 16.04 (VMWare), but I cannot do that in my Armbian OrangePi Pc. During the build progress the log says: ***WARNING:*** You do not have the full kernel sources installed. This does not prevent you from building the v4l-dvb tree if you have the kernel headers, but the full kernel source may be required in order …

hi freinds i'm trying to use a dht22 to read temperature and humidity , with Armbian 5.65 (stretch) 4.14.78-sunxi and orenge pi zero orange pi state like this /etc/modules-load.d/modules.conf #gpio sunxi #gc2035 wire wl-sunxi wl-gpio wl-therm #sunxi-cir #xradio_wlan g_serial #xradio_wlan i2c -dev /etc/default/cpufrequtils ENABLE=true MIN SPEED=6000000 MAX_SPEED=1200000 GOVERNOR=interactive /boot/armbianEnv.txt verbosity=1 logo=disabled console=both disp_mode=1920x1080p60 overlay prefix=sun8i-h3 overlays=usbhost2 usbhost3 12c0 wl-gpio rootdev=WID=55cee3e8-79d6-4dd3-ab14-99274fo626cb rootfstype=ext4 param…

Hi, currently my small server is running under Armbian 5.16 on Orange Pi Plus 2 board. It is using eMMC as root fs. I am expecting to get Orange Pi Plus 2E to be delivered shortly. The question is if following procedure will be OK to migrate server between boards: before: stop services etc. 1. insert SD card (16GB) when system is running. eMMC is visible as /dev/mmcblk0, SD card will appear as /dev/mmcblk1. 2. use nand-sata-install to copy system to SD Card. 3. mount /dev/mmcblk1 under some mount point, for example /mnt 4. verify, if /mnt/etc/fstab is valid: /dev/mmcblk0p1 / ext4 defaults,noatime,nodiratime,commit=600,errors=remount-ro 0 1 5. modify lin…

Hi, I just want to inform that probably there is a problem with correct detection of platform. Originally I had everything set for Orange Pi Plus 2E. However, after upgrade avery file is related to Orange Plus (2) - not 2E: Previously in any mentioned file there was orangepiplus2e identifier. Please see also dpkg.log: 2016-09-19 11:00:20 startup archives unpack 2016-09-19 11:00:21 upgrade linux-firmware-image-sun8i:armhf 5.16 5.20 2016-09-19 11:00:21 status half-configured linux-firmware-image-sun8i:armhf 5.16 2016-09-19 11:00:21 status unpacked linux-firmware-image-sun8i:armhf 5.16 2016-09-19 11:00:21 status half-installed linux-firmware-image-sun8i:armhf …

Hello all. I'm having a banana Pi and two days ago I had bananian OS on it. Now after searching online I decided to install armbian because it seems the most updated and more user-friendly one. One of the things that I want to do with my Pi, is to create an AP and connect other devices to it. So I read the documentation that is online from armbian site that refers on A. How to build a wireless driver? B. How to set wireless access point? Started with the A. and following all the steps, I realized that the 8192cu.ko module was already installed and loaded because when I tried to load it with insmod command it returned m…

Hi all, first i want to thank all of you for this great software. Problem: No ethernet on mainline 4.11 kernel. I tracked the problem down to a 'ethernet status = "disabled"' in the dtb for the orange pi zero. How to fix it? I have only very little experience with Device tree. 4.11 is ok for the other OPs, i tested the OP One. Kind regards svollmar

Hi, I try to run Armbian 4.5 (Bananapi Ubuntu trusty 3.4.109 desktop) on my Banana Pi M1+, but after the "Starting kernel..." prompt the monitor show only the "No signal" warning. (I connect the Banana Pi to my monitor with HDMI - DVI converter, I will be able to try it with single HDMI cable a few days later.) However, it boots. I have a lot of tries to change the boot.cmd and the banana.bin, but I didn't achieve satisfying result. The result of dmesg: [ 0.000000] Booting Linux on physical CPU 0 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.4.110-sun7i (root@production) (gcc v…

I can't get this dongle to work with 5.20. $ lsusb Bus 002 Device 002: ID 148f:5370 Ralink Technology, Corp. RT5370 Wireless Adapter Seems to be known one. $ lsmod Module Size Used by rt2800usb 13858 0 rt2800lib 42835 1 rt2800usb rt2x00usb 8227 1 rt2800usb rt2x00lib 34544 3 rt2x00usb,rt2800lib,rt2800usb mac80211 363732 3 rt2x00lib,rt2x00usb,rt2800lib mali 185786 5 ump 30408 1 mali mali_drm 2728 0 drm 178585 1 mali_drm Nothing wrong here? I guess so, wpa_supplicant is properly configured (ssid & psk),…

Armbianmonitor: http://ix.io/4cYv Hi I'm trying (and failing miserably) to achieve a simple goal with my Orange Pi 3 LTS: to have pin PD15 set as 'output-high' on startup. From reading the documentation, it seems the logical way to go about this task is to create a custom DT Overlay so that's what I set out to do. Based on the Armbian documentation and various examples I found online, I created the following sun50i-h6-gpio-pwr-status.dts file under /boot/overlay-user : /dts-v1/; /plugin/; / { compatible = "allwinner,sun50i-h6"; fragment@0 { target = <&pio>; __overlay__ { gpio_pwr_pin:…

Hi everybody, I'm new to this forum so first let me say a big THANK YOU to the armbian team for the excellent work. I've been playing around with my orange pi pc for a while now, not really wanting to spend much time on it (family, children, work, you know the story) or dig into details, and did not find any PnP distro that was 100% satisfactory (always something missing, unstable,...), until I gave a try to armbian. Apart from a weird kernel panic at the end of every shutdown, everytying is running smoothly so far. I'm now in the process of installing OctoPrint to drive my 3D printer and I am facing a problem with python virtualenv. Basically trying to execute…

On a Banana PRO with Debian Jessie I installed the lightweight desktop and all is more or less usable except the web browsing. I been using Iceweasel and Epiphany Browser (I can find Midori on the included repositories) but are completely unusable. I suppose that images are using the philosophy of "Disabled all memory reservations for GPU" Is a problem about the dedicated RAM to the graphics engine? How I can change this memory split? Thanks in advance.

Hi! Is PMP support build-in in newer armbian images? I installed ARMBIAN Debian GNU/Linux 8 (jessie) 4.4.3-sunxi on my banana pi. Or is a recompile still needed? With the default image i can see a dmesg "error ahci-sunxi 1c18000.sata: controller can't do PMP, turning off CAP_PMP". If recompile is needed can someone please post a link where to find step-by-step instructions how to recompile armbian with PMP support? Is the guide on htpcguides.com still correct? Thank you

Hi all, I upgraded my jessie 5.05 desktop version for Orange Pi PC via "apt-get upgrade" to 5.10 without any issues. Now I noticed that the green status LED blinks twice every ~0.5s after first reboot. Can anyone figure out the meaning of this?? Thanks in advance.

Hi. I'm trying to change the setup I have running on a pi pc to my new pi pc2 running latest version of nightly (at least latest version of the packages) Every kernel version I tried does include the w1-gpio and w1_therm but it's missing the w1-sunxi that's required for it to work. Is it missing from the kernel or am I the one missing something?

Hello everyone, we are Colombian developers and we are making a project with a Orange Pi PC. We tried to connect the Orange with a laptop via USB/OTG but in Serial port mode following this guide, but we exactly need connect the Orange with the laptop via USB/OTG in Mass Storage mode, who can help us to set this mode, we are trying but not with good results. Thanks, I hope that you can help us.

Hello, i am having a problem with my Orange Pi the download speed is very slow. In Deluge and by wget i get normal DL speed around 9Mb/s (i have a 10Mb internet). But in JDownloader and in builit-in web browser i get around 100Kb/s. Any idea how to solve this issue? I want to make a download server using OPi but this issue is stopping me from doing that. I am running the newest Armbian Desktop

Hi all, I bought this ethernet: The idea is connect to the SPI, but not sure what pines i must to connect... i follow this: Raspi.tv So i connect the pines, exactly like there say, but he connect on the UART not in the SPI :S (have 2 pines more, but the pines that he conenct i have in my ethernet board) So i connect to the gpio of my board and well turn on! yeah! xD: If i fo ifconfig i see this: root@bananapim2:~# ifconfig bond0 Link encap:Ethernet HWaddr 7e:99:6b:7c:04:39 UP BROADCAST MASTER MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 drop…

dmesg log: ci_irq: highspeed device disconnect [ 1150.728627] ehci_irq: highspeed device connect [ 1151.000116] usb 3-1: new high-speed USB device number 3 using sunxi-ehci [ 1151.294344] usbcore: registered new interface driver rt2870 lsmod log: g@orangepipc:/$ lsmod Module Size Used by mt7601Usta 561549 0 rndis_host 5140 0 cdc_ether 3679 1 rndis_host usbnet 14096 2 rndis_host,cdc_ether cdc_acm 15280 0 mali_drm 2732 1 drm 178255 2 mali_drm usblp 10048 0 pcf8591 3363 0 bmp085 3487 0 mali 123146 0 ump 29379 3 mali btrfs 712409 0 g@orangepipc:/$ ip link …

Hi Forum, My CT with "Armbian_5.14_Cubietruck_Debian_jessie_4.6.2" image doesn't shut down. Neither short push of power button nor shutdown -P (issued as root) doesn't really power off the board. The red LED is lightning and the display is ON, it halts after reporting "Reached Target Shutdown". The board is OK, for a long push of PB it powers off and with a Cubieez image it shuts down well. Has anyone seen this issue? What to do with it? Thanks, T

Hi , I am finding trouble using orange pi gpios, here my approach I am trying to scan 4x4 kepad using gpio how am I writing 0 to a particular gpio pin? step 1 : sunxi_gpio_set_cfgpin(pin, SUNXI_GPIO_OUTPUT); step 2: sunxi_gpio_pullup(pin ,SUNXI_PULL_DOWN); I am not sure whether I am correct here. I am not sure if I have to use UP or DOWN or NONE here in pull up call,but I tried UP and DOWN so for. step 3: sunxi_gpio_output(pin,val); here I am using val = 0 or 1 making pin low and high depending on my requrement. in my attempts I get vague results as ou…

Hi, It is nice to join in and be part of a such fast growing UOS. I would like get some advice and solve the following scenarios: * Internet Sharing with one Client only, no 'switch' needed, this has been accomplished with the instructions in https://wiki.archlinux.org/index.php/Internet_sharing, so all the iptables rules and NAT is done with success. I am able to navigate the internet from OPI-PC. * which armbian version for the smallest server to run on OPI PC, that will provide some web services. * Need to be able to access OPI-PC from the external world (from PC-3), this is what i am struggling to get it right. Say i want to connect to OPI PC …

Hi, I'm trying to get pygame working on Banana Pi / Banana Pro (with LVDS display) using the armbian 4.5 CLI images, but I'm unable to succeed (I think I'm missing fbturbo). I tried to install the basic desktop following armbian guide, but pygame still is not working. A little help on this one would be very appreciated, thanks !

Hello, I installed Ubuntu Bionic on sdcard and run Kodi on OrangePI but it seems very hot and hang out to reboot every 5mins. Do you encourter the same problem? And how to install Ubuntu into eMCC?