Allwinner sunxi

Hello folks, I'm having trouble booting https://dl.armbian.com/lime-a64/Debian_stretch_next_nightly.7z as of today on my A64-OLinuXino-1G4GW. Armbian is installed on an external µSD card; the device has internal flash. Do you see, how I can fix this issue? Thanks, yanosz Log is: U-Boot 2018.05-armbian (Aug 21 2018 - 08:46:56 +0200) Allwinner Technology CPU: Allwinner A64 (SUN50I) Model: Olimex A64-Olinuxino DRAM: 1 GiB MMC: SUNXI SD/MMC: 0, SUNXI SD/MMC: 1 Loading Environment from EXT4... ** File not found /boot/boot.env ** ** Unable to read "/boot/boot.env" from mmc0:1 ** Failed (-5) In: serial Out: s…

I have a encrypted external hard drive connected via USB. I want to be able to automatically access it after boot so I made a keyfile that I put in /etc/crypttab. After updating the crypttab file I ran update-initramfs -u. But after reboot the drive is still locked. Why is this? I suspect it might be because of the order of things at boot. Maybe crypttab is called before the USB device is initialized? Any help would be appreciated. Edit: I had a incorrect crypttab that's why it didn't mount. It works now thanks!

I got that stability issues on my banana pi m1, and notice that the last kernel available on armbian still the 4.14.18. Today I also run apt upgrade on raspberry pi 3 and it installed the kernel 4.14.30 that stop the ipsec vpn working, the same as in 4.14.18 used on armbian. I feel some frustration on the latest kernel updates, and wondering if anyone have some info about the next kernel update that solve this issues. Do you advise me to change to nightly builds to get a new kernel to test? สมัครufabet Any suggestion would be greatly appreciated.

board: orange pi zero plus (CPU H5) os: power on idle current is about 0.25A。 after poweroff the currtent rise to about 0.35A 。 and got error message on console: ----------------------------------------------------------------------- [ OK ] Reached target Shutdown. [67908.295169] reboot: Power down INFO: PSCI Affinity Map: INFO: AffInst: Level 0, MPID 0x0, State ON INFO: AffInst: Level 0, MPID 0x1, State ON INFO: AffInst: Level 0, MPID 0x2, State ON INFO: AffInst: Level 0, MPID 0x3, State ON ERROR: PSCI system shutdown: still alive ... -----------------------------------------------------------…

Hi, I'm trying to use the popular LTE USB modem Huawei E3372s (Stick mode) with NanoPi Duo. Modem is in Network card mode - USB_Modeswitch was installed and started root@nanopiduo:~# lsusb Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 002: ID 0525:a4a7 Netchip Technology, Inc. Linux-USB Serial Gadget (CDC ACM mode) Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 003: ID 12d1:1506 Huawei Technologies Co., Ltd. Modem/Networkcard Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 …

orange pi one synaptic package manager I installed the synaptic package manager on Armbian Xenial. If I input something to search for one core goes 100%. The search is so slow I have not let it finish it. Is it a bug? My raspberry pi 0 is able to do a search fast. Thank you.

Hi there, I got some NanoPi-NEO running and need to update the kernel, modules and dtb's. With 4.18 the Ethernet does not seem to get started correctly. I noticed a change in u-boot and the newer Armbian releases have Ethernet-Support in u-boot. So my basic idea is to not just copy the kernel files but also update u-boot via dd command. I suppose there are at least 3 regions in the image: 1. the partition table which I don't want to change. 2. the u-boot configuration which I'd like to keep. 3. the u-boot runtime. So for #2 and #3 I'll need an image file. I'm trying to set-up a build environment f…

I tested with Armbian Stretch image on NanoPi-NEO-Core2. PJSIP VoIP Client. MIC input does not work. Additional USB sound cards work well. In FriendelyARM original firmware, MIC input works well. I hope that this issue will be resolved. Please help me.

orange pi one armbian xenial When I obtained the orange pi one I installed armbian xenial. I booted the orange pi one. During boot I cannot recall if a red light flashed next to a steady green flash. The desktop worked. The orange pi one was connected to a hdmi display. Resolution 1280 x 720. I wanted to use a 1024 x 768 vga display by hdmi vga converter. The desktop would keep the 1280 x 720 resolution when displaying the desktop. I tried different things in order to get a 1024 x768 resolution. Did not work. One configuration resulted in trashing the power supply. I connected another power supply. The power suppl…

Hello, I am developing a project that will use the ethernet module ENC28J60 on orangepi pc plus, but I do not know how to configure armbian to enable using the module. Searching the internet I just found solutions for raspberry. I have already enabled the spi-spidev option using the armbian-config tool. What should I do now? Thanks.

Hello, in the company where I work, a nanopi M1 plus was purchased and we are developing a firmware to run on the device. In our code we need to change the settings of the active wired connection at that time, but we can not do it due to an error. If, for example, we use the following command: nmcli connection modify 'Ifupdown (eth0)' ipv4.method auto The following error message is returned. Error: failed to modify connection 'Ifupdown (eth0)': Connection is read-only The command is executed correctly if the connection is not managed by NetworkManager, so when in the file: "NetworkManager.conf" the "managed" parameter is set to false. We had to s…

I built Armbian_5.59_Nanopineocore2_Ubuntu_xenial_next_4.17.17.img for my board, and am trying to add an overlay dtb that describes a port expander I have on i2c2. $ sudo armbian-add-overlay ./mcp23008.dts Error: dtc does not support compiling overlays Please try to install matching kernel headers

My Pi Zero with H2+ and latest Armbian 5.35 Xenial works well, but on trying to increase the screen size I get: dk@desktop:~$ ssh dk@zero dk@zero:~$ sudo h3disp -m 1080p60 Unsupported board/kernel combination: Orange Pi Zero running 3.4.113-sun8i dk@zero:~$ Is this going to be fixed? nomachine.com's remote desktop for ARM works brilliantly Ubuntu + citadel-suite gets a mail server/chat server/+other into 337 MB - amazing!

Hi there, I've just got my first H3 board (OPi Zero +2) and I'm interested in learning how boot process works in detail, with a focus on Security ID features. As far I can see there's not that much documentation about S/NBROM (essentially linux-sunxi's Wiki and Allwinner-info git repo) and what's supposed to be H3's NBROM (header 1100, 1100, 1633) looks like slightly different from A10's one (from git) at first glance. Is there anyone here who has already worked on it and/or has info/symbols/pseudocode/whatever might speed up the reversing process? Thank you!

I have an Orange Pi PC Plus running the mainline Debian Stretch desktop version of Armbian, but lately I've been using it headless. When I'm logged in over ssh and shutdown it down using "sudo shutdown -h now", the ssh connection drops and the board's LED flashes then shuts off, giving every indication the board is off. However, power consumption doubles (increasing from ~1.2W to ~2.4 W)! The problem persists as long as the board is powered, so I presume the board is hung and never fully shutdown. Any thoughts as to what could be causing the board to hang when shutting down?

Hello, i'm trying to make a mesh network with some Orange PI Zero devices, but ibss (adhoc) and 80211s (mesh) seem not working...with an usb wifi work fine... I have read that this device's support isn't the best, but i don't kwnow if my case is a release specific bug or these modes aren't really supported. Installed release "Armbian_5.38_Orangepizero_Debian_stretch_next_4.14.14", i have also trying dev kernel but this don't load the device... What are the really working modes and valid interface combinations? Reported info by iw list command seem not correct. Thanks for the help

My NanoPi K1 Plus is using at the moment ARMBIAN 5.47 stable Debian GNU/Linux 9 (stretch) 4.14.51-sunxi64 ( https://dl.armbian.com/nanopik1plus/archive/Armbian_5.47_Nanopik1plus_Debian_stretch_next_4.14.51.7z ) In the archive at https://dl.armbian.com/nanopik1plus/archive/ is also https://dl.armbian.com/nanopik1plus/archive/Armbian_5.53_Nanopik1plus_Debian_stretch_next_4.17.9.7z Is 4.17.9 also stable? And if YES is there a simple way to update without reinstalling? I did try apt update apt upgrade and apt dist-upgrade but no 4.17.9 avail. Nightly is at https://dl.armbian.com/nanopik1plu…

OrangePi Plus 2e. Used Etcher to write Armbian_5.38_Orangepiplus2e_Debian_stretch_next_4.14.14.img to an Evo+ 32GB. Connected via USB serial (putty). Boot process hangs loading the ramdisk: U-Boot SPL 2017.11-armbian (Jan 25 2018 - 07:57:17) DRAM: 2048 MiB Trying to boot from MMC1 U-Boot 2017.11-armbian (Jan 25 2018 - 07:57:17 +0100) Allwinner Technology CPU: Allwinner H3 (SUN8I 1680) Model: Xunlong Orange Pi Plus 2E DRAM: 2 GiB MMC: SUNXI SD/MMC: 0, SUNXI SD/MMC: 1 *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: phy interface7 eth0: ethernet@1c30000 starting USB... USB0: USB EHCI 1.00 USB1: US…

Hi, My applications were running from eMMC when I used Kernel 3.4.113 and Orange Pi PC Plus purchased 6 months back. But on my last week purchase, armbian-config of 3.4.113 does not detect eMMC of Orange Pi PC Plus. I am told by Xunlong to use the latest kernel. This will result in huge development efforts. Are there any patches that can be applied to 3.4.113 to use my same application on latest PCB? Thanks

Hello Community! Does anybody tried to run the .Net Core or ASP NET Core runtime package on OrangePi PC2? I was trying to install it using MS guidelines [https://www.microsoft.com/net/download/linux-package-manager/ubuntu16-04/runtime-current] but no luck. I was searching Goolge for a while, and tried bunch of common solutions related to Linux and .Net Core installation - with no luck unfortunately. I am using: OrangePI PC2 ARMBIAN 5.59.180815 nightly Ubuntu 16.04.5 LTS 4.11.1-sun50iw2

Hello together, i opened a ticket here https://github.com/armbian/build/issues/1085 Why "cat /proc/cpuinfo" does not tell anything about the CPU type?

I usually build a new armbian full os image, apply some kernel options and have no problems booting a sopine64. The last known good version for me was: Armbian 5.51 / Kernel 4.14.54 The latest (and starting with 5.57) with Kernel 4.17.16 only seem to 'half boot' - they start up uboot but fail to load the OS and instead attempt to do a network boot over TFTP. The errors go by so fast that I can't really read it and have to resort to trying to video capture it and the monitor seems to be slow to initialize and i only see the tail end of the errors scroll by. I am sure a lot changed between 5.51 and 5.57 - I noticed a new…

I've got an Orange Pi Zero Plus running Armbian Bionic. I'm trying to add a virtual wifi interface so I can create a wifi hotspot so I can connect to it easily on remote networks. iw list shows that the adapter *should* be capable of adding an additional interface. This works on other Orange Pi boards I've got but not this one. Any ideas? root@opizero:~# iw list Wiphy phy0 max # scan SSIDs: 9 max scan IEs length: 2304 bytes max # sched scan SSIDs: 0 max # match sets: 0 max # scan plans: 1 max scan plan interval: -1 max scan plan iterations: 0 Retry short limit: 7 Retry long limit: 4 Coverage class: 0 (up to 0m) Supported Ciphers: * WEP40 (00-0…

Hi all, My Armbian hangs (freeze) after 1-2 hours. Below dmesg Aug 17 19:10:39 localhost kernel: [ 1666.194984] WARNING: CPU: 0 PID: 693 at lib/iov_iter.c:695 copy_page_to_iter+0x21d/0x35c Aug 17 19:10:39 localhost kernel: [ 1666.194987] Modules linked in: tun xt_nat xt_tcpudp iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack iptable_filter snd_soc_hdmi_codec rc_cec dw_hdmi_i2s_audio dw_hdmi_cec evdev sun8i_dw_hdmi dw_hdmi cec ir_lirc_codec lirc_dev pl2303 usbserial sun4i_i2s sunxi_cir sun8i_codec_analog sun4i_gpadc_iio sun4i_codec sun4i_tcon sun8i_mixer snd_soc_simple_card snd_soc_simple_card_utils snd_soc_core snd_pcm_dmaengine snd_pc…

Hi, we have problems with 5 inch display from waveshare. Can somebody help us.

Hi all After having used a lot the OPiPC2 with Armbian, I am now adding support for this board in openwrt. The first add board patch, has been merged recently in snapshot branch and works ok. For the first implementation I set the MUSB port role to host, but now my goal is to set it in OTG, making this port available for usb serial console, connecting a host PC to it. So, I built the needed support for g_serial in kernel and give a try, but I cannot make it work The host PC detects just nothing, as the OpiPC2 does not detect a USB host being connected to it Checking the dmesg I see something suspicious: [ 0.614423] sun4i-usb-phy…

Hi. I'm running armbian on a OrangePi PC 2. This is my uname -a output: root@picard:/lib/modules# uname -a Linux picard 4.18.0-rc8-sunxi64 #30 SMP Mon Aug 13 00:57:56 CEST 2018 aarch64 aarch64 aarch64 GNU/Linux I am running LVM2 on that system. I updated today, and the dm-raid kernel module seems to have gone missing. I can't get my LVM volume group up anymore, since it can't find dm-raid: root@picard:/lib/modules# lvscan inactive '/dev/vg-data/lv-data' [2.70 TiB] inherit root@picard:/lib/modules# lvchange -ay vg-data/lv-data modprobe: FATAL: Module dm-raid not found in directory /lib/modules/4.18.0-rc8-sunxi64 /sbin/modprobe failed…

Hello Community, I am trying to install Docker on my Cubietruck. As a guide i used the official guide by Docker https://docs.docker.com/install/linux/docker-ce/ubuntu/#upgrade-docker-ce When I am at actual installation step I walking in this following error msg. Does anyone have a idea where to start looking ? Thx.blub474

Hi Guys, After a long time after the release Linux kernel 4.x I want use the I2S on Lime2 (Armbian Stretch kernel 4.14.14), but I2S interface did not work. I was add activation of overlays i2s0 and i2s1 into/boot/armbianEnv.txt root@lime2:~# cat /boot/armbianEnv.txt verbosity=1 logo=disabled console=both disp_mode=1920x1080p60 overlay_prefix=sun7i-a20 rootdev=UUID=dcf7af80-8026-4e99-870f-f0d35f926063 rootfstype=ext4 overlays=i2s0 i2s1 usbstoragequirks=0x2537:0x1066:u,0x2537:0x1068:u After reboot I can't see I2S interfaces... root@lime2:~# aplay -l aplay: device_list:270: no soundcards found... root@lime2:~# lsmod | grep snd snd_soc_core 118…

Hi all! I have Orange Pi Zero with armbian kernel 4.14. i'm not sure about the topic name, but to me seems like that. I've managed to make spi tft work flawlessly on my zero. But after i've continued with touchscreen module, i've got problems. After X is started, i can confirm touch is working, because when i touch the display, mouse pointer moves. But in the strange way, very laggy (more than a second to respond), but is works only for ~10 secs, then display stops to redraw. And it is not because of bad contacts! Because i've soldered everything together. And it also freezes if i don't touch it. The system is still working tho,…

Just a quick question due to having just updated and rebooted my Cubietruck.... I was running 5.38 mainline Stretch, but I see that armbian-firmware 5.45 was installed over 5.38... so shouldn't the welcome screen now be saying "Welcome to ARMBIAN 5.45" instead of "Welcome to ARMBIAN 5.38" still? Or is that package not the one that determines the Armbian 'version'? Maybe a better question would be what would update /etc/armbian-release ? The update process was otherwise smooth and doesn't seem to have rise to any nasty surprises . I also look forward to trying out the pineH64 image since I see that has just made a big jump, as well as th…

Hello i have a 7 inc LCD with HDMI board, but i couldn't use the screen. I've installed armbian 5.41 desktop Linux opiwin 3.10.107-pine64 #11 SMP PREEMPT Sun Feb 11 19:22:44 CET 2018 aarch64 aarch64 aarch64 GNU/Linux my screen is like this what are the steps to work this screen orange win plus. it is working orangepi one via h3disp but a64 doesn't have this feature. and this screen resolution is 1024x600 so if i set 1024x768 the screen ratio is not correct. thanks.

Hello armbian forum, I have an Orange PI Win plus with armbian desktop legacy kernel 3.10.y on it. I also have a extension board from my Raspberry 1 which I want to use. The Problem is that the extension board needs the pins 8 & 10 for UART communication. I read already that UART(2) over pin 8 & 10 is used for Bluetooth? I don't need Bluetooth and want to disable it to free up the pins. Uart1 Pin 38 & 40 and Uart3 Pin 11 & 13 are working finde. How can I make this? With overlays or editing the .dts files?

Hi guys! I have some trouble with my Lime 2. My original setup: Armbian 5.38 +4.14.18-sunxi software installed: Pihole V3.0 with dnsmasq dhcp enabled. SD : a fresh Samsung Micro SDHC 32GB EVO power-supply : a 5V power-supply adaptor Current behaviour: After [1~4] days the my board disapear of my network. With dnsmasq dhcp server disabled, there are no problème. My guess: their are some troubles between the dhcp and Armbian. Indeed in tried to setup a isc-dhcp-server to remplace the Pihole dhcp without success. (Same behaviour) You could see my search on Pihole forum here …

I've had an Orange Pi Zero Plus 2 H5 for a few months, and it is driving me crazy. I can easily boot into the useless Android distro included on the eMMC. I can run most of the distros on the OrangePi website, although they seem to all be missing features or not working 100% in one way or another. I would LOVE to run Armbian on this board. Each time I try, I have huge problems. My video signal is often garbled or at best full of artifacts. I get segfaults every few minutes, and it seems like the filesystem is corrupted. I've tried running it with multiple power supplies (I have several Canakit 2.5amp ones), as well as several different gen…

hello everybody, I am new on the linux world but after some search and work , I managed to start my Orange Pi plus 2E with a stretch image armbian 5.38 and everything is working well. Recently after successfully installed several domotic solution like Jeedom and Zwave, I start to work on the integration of a 3G card, but I need to use some CLI to change parameters and it is when I discovered that I completely forgot Root password and the other SU abled user account. Since everything is running from the eMMC, i cannot access to any fils in the OS as explain in some other discussion with card using SD card. Is there a way to recover…

LANG=en_CN.UTF-8 I have it+SD card+usb TouchScreen+HDMI Screen which work with http://www.orangepi.org/'s image. I've downloaded https://dl.armbian.com/orangepilite2/Debian_stretch_next.7z,verified the sha256 checksum,burn SD card,verified checksum of SD card... After UBoot, nothing was displayed,but `fdisk -l /dev/sdb` changed -------------------------------- Disk /dev/sdb: 30 GiB, 32220643328 bytes, 62930944 sectors Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disklabel type: dos Disk identifier: 0x16977123 Device Boot Start En…

Was playing around with a well tuned system, wanted to upgrade my kernel - but seem to have broken something. I was on 5.37 - manually upgraded to stretch and everything was working quite well. Today tried upgrading my kernel, and was playing around with `armbian-config` to switch kernels, but didn't go so well. After a reboot had no network. Plugged in the serial console, and was greeted with the following. pi@orangepione:~$ uname -a Linux orangepione 4.11.12-sun8i #2 SMP Wed Nov 22 13:50:32 CET 2017 armv7l GNU/Linux pi@orangepione:~$ dpkg-query -W -f='${Version}\n' linux-stretch-root-orangepione dpkg-query: no packages found matching linux…

I have installed "Armbian_5.54.180727_Nanopineo_Debian_stretch_next_4.17.11" in the eMMC..My doubt is always boot from eMMC, If blank sd card is inserted in the slot.

Hardware: Orange Pi One with a CF-WU810N (Realtek 8188eus) USB WiFi dongle Software: [MAINLINE] - ARMBIAN 5.38 stable Debian GNU/Linux 9 (stretch) 4.14.14-sunxi Goal: Configure and run the Orange Pi One HEADLESS (using a physical ethernet during initial configuration) I've been away from armbian for awhile, so it looks like I've got some catching up to do. I'm running a headless Orange Pi One with a CF-WU810N (Realtek 8188eus) USB dongle. Since it's headless I use a physical ethernet cable to get access and make initial configuration. From the documentation (https://docs.armbian.com/User-Guide_Getting-Started/#how-to-connect-to-wireles…

I enabled modules, and connected DS18B20 but still haven't 28-XXX... folder in /sys/bus/w1/devices. In README.sun8i-h3-overlays written that default port is PD14 but i can't find it on my board pinout.

Hello everybody and sorry to be sooo stupid. I used to play with Orange Pi Zero H2+ and there was RJ45: it allowed me to connect it via the LAN. Now, with the H5 version, there is no RJ45 connector. And there is no USB port. So how to gain access to this card to start configuration etc... ? Thanks in advance.

my opi pc only hosts smb/nfs/transmition, very hot at summer. Welcome to ARMBIAN 5.38 stable Debian GNU/Linux 8 (jessie) 3.4.113-sun8i System load: 0.23 0.23 0.22 Up time: 68 days Memory usage: 28 % of 1000MB IP: 192.168.2.99 CPU temp: 65°C Usage of /: 26% of 7.2G when I change cpufreq gov, find no cpuidle driver, is that true? upstream status about cpuidle driver? I have to disable 2 cores to cool down, and also change cpufreq to ondemand.

Hy Just installed the Armbian Bionic image. Tried to attach different usb devices but they did not got registered. So I tried to look at the settings under Hardware in den armbian-config but it's gone.... I remember in the Armbian Stretch build it was Variable... Can someone help me Andy

Hi, I have 3 Orange Pi Zero running with the same sd image. It's all working fine, but yesterday I added a fourth device, which for some reason took a MAC address that is the same of another device, causing issues on the connection for both of them. I'm using the mainline kernel ARMBIAN 5.38 stable Debian GNU/Linux 9 (stretch) 4.14.18-sunxi. Searching on the internet, I found someone saying that mac addresses for Orange Pis are randomly generated every time the device reboots, but in my case the taken MAC address is always the same for every device. I saw to that people suggested to check the content of the /etc/modprobe.d/8189fs.conf f…

Hi, I'm tring to solve an issue on my Orange Pi Zero: at boot time the pins PA18 and PA19 are stucked to Vcc. I tried a lot of solution, now the best result is to add at the beginning of the file boot.cmd the command to clear the gpio configuration: gpio clear PA18 gpio clear PA19 and recompile the boot.scr. Despite this the pins goes HIGH for some seconds until the bootloader reach this line. What is the boot scheme? Why i get this pin HIGH? Is it because the I2C1 is configured? Is it possible to disable it? Thanks Simone

Hi, I have a BananaPi and BananaPi Pro connected to the Lemaker 7" TouchLCD. When I boot the system, I can't see any console output. I only see a flashing cursor in the left top corner and then it starts the X-window-manager. What do I have to change to see the boot messags on my LVDS LCD? I have tried to change the console=both value to tty0 or tty1 via armbian-config, but this doesn't work. Any ideas? Here is the output from cat /proc/cmdline: root=UUID=e9635572-227e-485c-b76d-b4f0d6d34394 rootwait rootfstype=ext4 console=tty1 console=ttyS0,115200 hdmi.audio=EDID:0 disp.screen0_output_mode=1920…

Hi, After running nand-sata-install at the step "eMMC install: Formating /dev/mmcblk1 to ext4 ... please wait:" mount: wrong fs type, bad option, bad superblock on /dev/mmcblk1p1, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so. dmesg: [ 72.516530] EXT4-fs (mmcblk1p1): Unrecognized mount option "flush" or missing value [ 73.928286] EXT4-fs (mmcblk1p1): Unrecognized mount option "flush" or missing value [ 74.238966] EXT4-fs (mmcblk1p1): Unrecognized mount option "flush" or missing value [ 74.822857] +mmc_blk_issue_discard_rq,1809 [ 74.822921] mmc2:mmc…

Hello all, i wonder what is the status of the support for this touchcontroller. I've got to know that in latest kernels there is prebuilt support for it and in my latest armbian there is a module for this. But following this: https://www.raspberrypi.org/forums/viewtopic.php?t=143581 i failed to make it work. May be i've done it the wrong way in armbianEnv.txt tho. Should i just insert theese line into this file? dtparam=i2c_arm=on dtparam=spi=on dtoverlay=ads7846,penirq=25,speed=10000,penirq_pull=2,xohms=150 According to dmesg log, module is loading, but nothing happens when i touch the screen. If not, should i instead us…

Hello everyone, I have OrangePiPlus2E and I use Debian Jessie default 3.4.113-sun8i I was download and install Debian Stretch Next on second card and NFS don't work. I installed nfs-kernel-server and nfs-common. Next I copy exports file from older Debian and I can't connect to my Armbian via NFS protocol. Log file tell mi device trying connect, but I get answer from Armbian: can't get hostname. I don't know whad I did wrong. If I change CF card, NFS works fine on Debian Jessie. Could you help me? Regards

First : i downloaded both Armbian versions for "Orange Pi+ 2" but reported link file names where different from those that actually download : a) link says https://dl.armbian.com/orangepiplus/Ubuntu_xenial_default_desktop.7z, but download file is Armbian_5.38_Orangepiplus_Ubuntu_xenial_default_3.4.113_desktop.7z b) 2nd link says https://dl.armbian.com/orangepiplus/Debian_stretch_next.7z, but download is Armbian_5.38_Orangepiplus_Debian_stretch_next_4.14.14.7z Second : after download i extracted both with : 7z e filename.7z then i run etcher 1.4.4 cli : ./etcher -d /dev/sdd filename.img -y , result sdcard writed, then i inser…

Hi all, I'm interested in running canbus on Banana Pi (A20). I have problem with setup canbus. Some info about system: ARMBIAN 5.38 stable Debian GNU/Linux 9 (stretch) 4.14.18-sunxi in armbian-config -> System -> Hardware only "can" is enable and MCP2551 transreciver is connected to can rx/tx banana pinout. lsmod | grep can: root@bananapi:~# lsmod | grep can can_bcm 24576 0 can_raw 20480 1 can 20480 2 can_raw,can_bcm sun4i_can 16384 0 can_dev 20480 1 sun4i_can Next setup interface: ip link set can0 type can bitrate 125000 restart-ms 10…

OrangePi PC Armbian 5.35 with LXDE desktop Firefox 57.0.1 I haven't done anything with my OPi for 6 months, so when I tried it again, it booted normally except for not looking quite right on my big HDMI screen. I remember fiddling with this in the old immediate-post-boot phase, but http://armbian.com says to use "sudo armbian-config". There were 250 MB of updates, which took forever. Meanwhile I tried to run Firefox, which repeatedly crashed on startup. Installing v61.0.1 didn't help. Also Konqueror, but not Dillo or Midori or Chromium-browser. Back to fixing the display, I tried running it but didn't have the armbian-config, so I downlo…

I have a NanoPi Neo Core with eMMC..I have installed armbian os from "https://www.armbian.com/nanopi-neo/" to sd card and tried the "Armbian configuration utility" and "nand-sata-install" to install os to eMMC. But it is showing "there are no targets..please check your drives."..If we give "fdisk -l" command it is not detecting the eMMC. How to solve this issue??

Hi Did a fresh install of Armbian_5.38_Orangepiplus_Debian_stretch_next_4.14.14.img on a Orange Pi Plus. Efter reboot, I did a apt-get update and apt-get upgrade, then rebooted... For some reason, wlna0 is no longer listed. I can do a "ifconfig wlan0 up", which brings up the interface - but so far I have had no success in configuring the wlan0 interface, neither by armbian-config nor nmtui I have even tried to edit /etc/network/interfaces and add: allow-hotplug wlan0 auto wlan0 iface wlan0 inet dhcp wpa-ssid "RG47C" wpa-psk "Secret!!!" but I am still not able to get it up and running. After …

Hello, I installed Armbian on Nanopi M1 Plus. I used it for a couple of days but now I encountered a problem: the boot stops after the following writing appears: "started hostname service" I tried to wait several minutes but nothing happens anymore Best regards Marco UPDATE: The problem occurs when the device is powered only by the Debug UART, probably the pc usb is not enough to power it

hello, im use ARMbian on bpi m2 and will programming the gpio with python. i have tested with this little script, but i become a runtimeerror. i can not use the RPI.GPO. What can i used to programming GPO with Python under bpi m2?

I've formatted the opi+2 card I have using recovery and now I get ping screen. I use a 1280x1024 screen with a DVI converter. I tried the HDMI cable using a 1080p TV and it worked without issues. I also tried "h3disp -m 33 -d" "h3dsip -m 1024x768 -d" "h3disp -m 33" and so on. None of them worked. Here is a system output (used armbianmonitor -u) http://ix.io/1iWN !! I noticed this output when used dmesg command: [DISP] disp_ioctl,line:1584:para err in disp_ioctl, cmd = 0x0,screen id = 65536

Hi, I have a Opi+2 board which has an Armbian system installed in its emmc. Now I want to format its Emmc and reinstall Armbian but the problem is I don't have a proper SD card. So I need to do it without an SD card. I have a running system on it, so I can reach the working system. Is there a way of formating it while its running? For example a command does the same thing with "dd if=armbian.img of="/dev/mmcblk1"" (which won't work while there is a system working, its just an example) (mmcblk1 = working system, emmc)

Hello, does anybody found a working WiringPi version for the Orange PI Zero+ H5?

I know I'm supposed to log with armbianmonitor -u, but I can't behind that ***** corporate proxy. So I made a strace. / _ \ _ __ __ _ _ __ __ _ ___ | _ \(_) |__ /___ _ __ ___ | | | | '__/ _` | '_ \ / _` |/ _ \ | |_) | | / // _ \ '__/ _ \ | |_| | | | (_| | | | | (_| | __/ | __/| | / /| __/ | | (_) | \___/|_| \__,_|_| |_|\__, |\___| |_| |_| /____\___|_| \___/ |___/ Welcome to ARMBIAN 5.38 stable Debian GNU/Linux 9 (stretch) 4.14.18-sunxi System load: 0.11 0.24 0.25 Up time: 6:55 hours Memory usage: 26 % of 493MB Swap usage: 9 % of 127Mb IP: 10.aa.bb.ccc 169.254.6.65 CPU temp: 45°C Usage …

Hi all, I noticed that my OrangePi freezes after 4-5 days of uptime. Something happens (usually around 06:00) when my script simply stop working (no more log entries) and then reboots after ~12 hours (exactly at 13:17 in all occasions). Finally the orange pi becomes unresponsive and heats up to 85-90 degree Celsius. I've checked CPU temperature, disk and memory usage but haven't found anything... I'm a beginner in armbian and completely having no idea what could be the root casue. Could you please help? I've executed a diagnostics you can find it here: http://ix.io/1iQc Related syslog entries: Jul 31 06:10:01…

hi. I have build armbian 5.54 bionic 4.17 and it does not boot. 4.14 works but my intention was build bionic. It is possible to switch back to 4.14 when build armbian myself? Thanks for reply in advanse

Hi, guys, today I've menaged how to make my opi1 work with armbian. the problem is that my hdready tv (720p50) has some problem with underscan, the desktop goes off screen so I cannot see the taskbar. Of course this is a problem of my tv, because I have the same problem when I use it as monitor for my PC, but there I can set the underscan through nvidia setting. So, How can I set up the overscan/underscan to see all the desktop on 720p? (using h3disp and set 576p doesn't work, I have "no signal" on tv) thank you in advance

Hi, I'm trying to set up an Orange Pi Zero with Armbian, so that I can use it as a Network Card (i.e. when I plug it into a computer it's automatically recognized as a Network Card). It seems there isn't enough documentation about this issue. Can anybody help me, please? Thanks in advance. Kind Regards.

My Orange Pi PC2 work fine with Stretch (mainline, 4.14.48) between 35 and 65 °C. I got only a minor (but annoying) problem: the board start overheating after a shutdown (sudo shutdown -h now) and reach >70 °C after few minutes. Is it a kernel problem? Or a hardware design fault?

Hello everyone, Is there any utility to deal with overscan when using TVout? I'm using Armbian Legacy kernel. There is a tool called Allwinner_TVOUT_manipulator, anyone have used it?

I use the Armbian_5.45_Orangepizeroplus2-h5_Debian_stretch_next_4.14.44.img. I want to use a sensor based on the spi protocol. In armbian-config i enable the spi ,the armbianEnv.txt like this: verbosity=1 console=both overlay_prefix=sun50i-h5 overlays=i2c0 i2c1 spdif-out spi-add-cs1 spi-jedec-nor spi-spidev uart1 uart2 usbhost2 usbhost3 rootdev=UUID=bb48b498-7bd1-4018-b77d-ba00fa61a33d rootfstype=ext4 param_uart1_rtscts=1 usbstoragequirks=0x2537:0x1066:u,0x2537:0x1068:u But in /dev on spi-dev root@H5:~# ls /dev/s shm/ snd/ stderr stdin stdout Is it because there is no code adaptation spi-dev? if not ,I want to try to transplant th…

Hi guys, today a archive to run an orange pi one with a 5v dedicated power ac (not usb one used for smartphones). i try either official. Ubuntu ldxe image and armbian (burned with etcher on Samsung sd) On my first try I saw on my 720p TV (hdmi) some write then nothing else, no signal. And a green led lights up with a red led blinking. on next tries no video signal at all and only the red led is still light on. I can't try android img cause phoenixcard app give me error. Is there something I could try? Thank you or just you can tell me what that leds means

I bought a Cubieboard AIO A20 Einstein and wanted to install Armbian. Is there an image I can use to get access to this board? I tried a few images following the install with sd card with no success. I have gone back and forth burning images, reformatting the drive, test and trying again. I'm a newbie but I have completed several installs on other machines just not one like this. I'm outside my comfort zone but keep on trying. I can install to msata and boot from that and there are boot settings in the Cubie desktop. Knowing what image to use (if any for Cubieboard AIO A20 Einstein) moving forward would be helpful. Any other tips, suggestions, how to's, and successes wou…

Hello, I have orange pi zero with armbian and i need to upgrade kernel to version 4.x how to do it? ARMBIAN 5.38 stable Debian GNU/Linux 9 (stretch) 3.4.113-sun8i is it possible at all?

Hi, I built a fresh Armbian Image from scratch (using Armbian build system). After that I used Etcher to burn .img file to SD card. Everything works great, but U-Boot shows, that there is no environment. I used saveenv and fixed a problem. Then I installed Armbian into internal memory (eMMC), same message about environment, I tried fix it same way, using saveenv, but I get only an error message and infinite loop. Screenshot attached. How I can fix that? UPD: My board - Orange Pi Zero Plus 2 Kind regards

Hello everybody... I will use this small "box" as Access Point (AP) Standard scenario, hostapd + dnsmasq, eth0 and wlan0 bridged to br0 Everything works fine, except one "client" .. Hostapd DEAUTHENTICATE my notebook. It has dual band interface - 03:00.0 Network controller: Intel Corporation Centrino Advanced-N 6200 (rev 35) (Linux Mint inside) .. This was happen on all Armbian images with 4.14.y kernel ... .. On Armbian Xenial with 3.4.x kernel this was no happened.. Wifi connection works fine, for a long time ... Heve anybody same problem .. ?? or not ..? Here is log:

Hi all, first of all, I really like the dev-tools! I successfully developed my own Image (incl. patches etc.) and it's running great. But now I want to "burn" it to the Orange Pi's emmc directly, without using nand-sata-install ... it's necessary, because the target-image does not allow shell- and/or ssh-access (for purpose). So I flashed a "normal" armbian-image to my sd-card, copied my own image-file to the card, booted the card and wanted to 'dd' my image to /dev/mmcblk1. Everything went fine till now ... after rebooting w/o the sd-card plugged in, the loader hangs in a loop (Rebooting within 10 seconds) :/ I looked into the nand-sata-install-sc…

So trying to run some GPIO interrupts using wiringpi. Using the wiringPiISR function and setting and interrupt handler seems to work, but as soon as the first interrupt happens, the handler gets stuck in some sort of loop and just get infinitely called. Pretty sure this is some bug in sys, since the wiringPiISR function just uses sys gpio calls to do the interrupts. Could be wrong and just be an issue with how wiringPi does it. Either way has anyone come across this and know of a workaround to fix this?

Hello, First of all, please understand that I am a beginner level. My project is to make a NextcloudPlus on a Lime2 NAND version because of the following reasons : - Lime2 is Open source board, so no third party code into it - NAND version because I don't want to rely on a micro SD card, as it can be unstable for too many read/write (NextcloudPlus indexes a lot with sync). - SATA version because I would like to store data through a SATA HDD (I feel it is more stable than USB). So, I have tried to make : nand-sata-install ...but after shutting down and removing the micro SD cart, it was impossible to boot from NAND (the…

Hello, I am trying to apply the following configuration to my nanoPi Duo Core: * Boot from eMMC * System on SATA/USB (disk) When i try to find the eMMC device using the command "fdisk", I can only see the SD card and the disk that I added. My NanoPi duo core contains the eMMC memory but I am unable to find it. In addition to that, If I try to execute the script "nand-sata-install", only one option is available : boot from SD, system on SATA / USB. The other two options : "boot from eMMC / NAND, system on eMMC/NAND" and " boot from eMMC / NAND, system on SATA / USB" are not mentionned. Can someone help me w…

Hello :), I have updated my system from "Armbian_5.35_Debian_jessie_3.4.113" to latest "Armbian_5.53.180722_Orangepizero_Ubuntu_bionic_next_4.17.9". With jessie there will only S0, S1, S2 displayed and Im Working with S1 (Uart1) and S2 (Uart2) from the 13 Pinheader. With Bionic and also Stretch i got S0, S1, S2, S3, S4, S5, S6, S7 and none of them is working. So how can I access the Uart1 and Uart2 with the new Bionic build?

Hi, I have downloaded and installed Armbian to my Pcduino3 board with the legacy kernel 3.4.113. But now I want to downgrade it to the kernel version 3.4.79. Is there any way to do it? Regards,

Hi, I have flashed Armbian_5.35_Orangepilite_Ubuntu_xenial_default_3.4.113_desktop.img - and it works fine with my Orange Pi Lite v.1.1 But if I flash Armbian_5.38_Orangepilite_Debian_stretch_next_4.14.14.img which is aslo supported, the device does not boot. At least I get no output on HDMI, and no serial console over OTG. So I cannot check if it does not boot at all, or dies somewhere in the middle How can I check why it does not boot?

I would like to save the pain of all the newcommers in setting up the hotspot on their OPi ZERO. Please note, that the wifi module on this board is crappy and the available driver is barely working. The AP function is left enabled in the beta builds. You can read about it here: thread about the wifi module I am not a dev or any highly experienced user. I tested this step by step with my Orange Pi Zero 256MB, board rev. 1.1: 1) download the image from dl.armbian.com: Armbian_5.35_Orangepizero_Ubuntu_xenial_default_3.4.113 2) write it to your SD card 3) SSH to your OPi Zero 4) run as root armbian-config 5) navigat…

Hi Guys, I wanted a debian stretch based OS, and I followed Olimex consideration on Armbian. The I visited the Page of Lime2( not nand or emmc): https://www.armbian.com/olimex-lime-2/ The stretch Image that is there...is configured to boot from emmc :( I want a debian stretch based version. I checked sha256 checksums OK. Serial Debug Output: U-Boot SPL 2017.11-armbian (Jan 25 2018 - 01:01:01) DRAM: 1024 MiB CPU: 912000000Hz, AXI/AHB/APB: 3/2/2 Trying to boot from MMC1 mmc_init: -110, time 37 spl: mmc init failed with error: -110 SPL: failed to boot from all boot devices ### ERROR ### Please RESET the boar…

Previously I installed legacy Armbian to an Orange Pi PC Plus device and noted down its eth0 and wlan MAC addresses. Then I installed a Mainline Armbian server image to its EMMC, updated the armbian-config to enable the desktop manager. Now I checked the MAC addresses to be completely different. Why does this happen?

Hello, I am having strange problem with Olimexino A20 Micro, Ambian 5.38, 4.14.14. After every 2-3 days standby with minor cpu usage I am getting an FS error. I have tried Armbian Ubuntu/Debian and different sd cards but this doesn't change anything. I think with previous kernel there wasn't such an issue. I've connected it to the serial port and I see: login: [381301.434449] EXT4-fs error (device mmcblk0p1): ext4_journal_check_setected aborted journal [381301.444715] EXT4-fs (mmcblk0p1): Remounting filesystem read-only [381340.727458] EXT4-fs error (device mmcblk0p1): ext4_find_entry:143621620: comm sh: reading directory lblock 0 [381494.351427] EXT4-fs e…

Greetings, i want to run some shaders on a headless OrangePI Zero (H2+/Mali 400 running standard Armbian on mainline kernel). I saw there are drivers available now. Is there a binary blob of the driver available somewhere? Or maybe a simple HOWTO? I don't want to mess with driver compilation if I don't have to. I just want to run my shaders on that GPU.

There appears to be a problem or incompatibility with the new 2018.05 u-boot configuration and/or implementation and the Armbian sunxi-next startup scripts (both in the current master branch). The "fdt" command processing doesn't appear to properly expand local environment variables before trying to execute them (?). Here's an example from a vanilla Armbian boot (u-boot 2018.05) - notice the "libfdt fdt_path_offset() returned FDT_ERR_NOTFOUND" errors when the DT fixup script runs: ... Err: serial Net: No ethernet found. 230454 bytes read in 15 ms (14.7 MiB/s) starting USB... No controllers found Autoboot in 1 seconds, press <Space> to…

Hi, every one: I installed Armbian Xenial desktop legacy kernel 3.10.y on my OPI win plus , it's good. (At least, Bluetooth, WIFI and Ethernet are good). But after i execute "apt upgrade",The bluetooth is fault. So, I tried to freeze the kernel upgrades, and hold "armbian-firmware"package, then run "apt upgrade", All do not work. However, when i insert a BT-dongle(USB), this dongle is functional. So I think there is a bug in some package, please help me to solve.

I have OPI 2 running latest armbian mainline with MQTT broker and home assistant only. And I've started to experience hard freezes that only power re-plug helps :/ At first I thought that only networking was gone, but I've triggered hearbeat on red onboard led and this led is just stopping blinking on freezes. I've even got rid of Network Manager and setup iface in old good way via /etc/networking/interfaces. Then I've connected to serial console, run minicom in screen with logging to file. Just to see if serial console would show some kernel panic or so...but nothing, no output on serial console. Anyone experienced such behaviour? How to debug it? My sec…

I cannot get SPI working on my Nanopi Duo or rather there is no /dev/spi*. I build a custom Kernel with the build process and Network and other stuff works. Loading the spi-spidev overlay in various ways did not help. (Loading via U-Boot, during runtime, combine the overlay and devicetree and compile it as whole) By the way, the Images from https://www.armbian.com/nanopi-duo/ are not even booting through U-Boot for me. Some Infos:

Hi, I'm running Armbian Stretch with the 4.14.y kernel on my Orange Pi Zero, as a headless Samba server. Does anyone have a link to a tutorial on how i can add a GPIO button to run the shutdown command, so I don't have to SSH into it every time I want to shut the thing down? thanks.

Hello I have an armbian on my Orange Pi PC2 Could you tell me, how I can detect in console is audo jack is plugged in or not?

So I have an application which requires 1Mbps UART and wasted a few days trying to debug my board thinking that was the issue (was working perfect at 115kps), so I decided to scope the UART TX from the orangpi, and of course that signal was not actually working at 1Mbps. Scope is saying that its running at 750Kbps. Did some research and it looks like there is some sort of UART scaling frequency set in the driver, which excludes certain bitrates from running (check here https://github.com/jernejsk/linux/blob/master/drivers/tty/serial/sunxi-uart.c#L356-L381 ) Did some further tests and 460Kbps works fine as well as 1.5Mbps (so its not an issue w…

Hello. I want to test wireguard with the bionic nightlies on my OrangePi Plus 2e, but I'm unable to install the correct linux headers. In armbian-config, it show the "loading kernel modules" and the installing screen 2 times for a second, then goes back to the main screen. If I want to install with "sudo apt install linux-headers, it shows these possible options: linux-headers-udoo 5.52.180715 linux-headers-sun8i 5.52.180715 linux-headers-sun7i 5.52.180715 linux-headers-rockchip 5.50.180630 linux-headers-odroidxu4 5.52.180715 linux-headers-odroidc1 5.52.180715 linux-headers-next-udoo 5.52.180715 linux-headers-mvebu 5.52.1…

I have simple Banana Pi. I have Armbian on it installed on Feb this year. I can see in Changelog that there were no kernel updates for this (A20) board. Will there be any kernel updates? And when?

Hi! I successfully set up a headless web server using an Orange Pi PC, and Armbian Stretch (mainline kernel 4.14.y). I installed MySQL, PHP 7, and a custom web application built with Symfony. It is running better than I expected (faster than my local XAMPP). However, I was wondering if it could handle 35-45 visitors/users connected at the same time or not? Thanks!

Hello, I've purchased a 2e recently, in order to replace a RPI3 with a more powerful device (and get graphics acceleration, be able to watch youtube videos, etc). I've tested multiple builds, and even on the legacy kernel, there is just no way to get it to work properly. The board, when it sits completely idle, is between 48 and 52°. And if I move a window on the desktop, it's all laggy and the cpu jumps to 60+° --the same with a mainlain image in fact, in headless mode... frequently the console would freeze for a couple seconds while the temperature is very high for no reason. It seems there is no hardware graphics acceleration, ever. Curr…

Hi, Got Debian (8) legacy 3.4.113 server/console and would like to setup a WiFi hotspot. (latest Armbian build 5.51) Seen two methods in Armbian docs 1. -> https://docs.armbian.com/User-Guide_Advanced-Features/#how-to-set-wireless-access-point and via armbian_config in https://docs.armbian.com/User-Guide_Armbian-Config/ 2. -> https://www.youtube.com/watch?v=__BJtInOQFY So I'm a bit buffled about it. Got some questions Got a RTL8188CUS is it suported nowadays? or should I get a specific other one? Do I need to have internet/ethernet/lan connection active during the hotspot creation via armbian_c…

Hi all, I am using Orange Pi 0, I am trying to show some initial booting message on LCD. I am interfacing JHD204A which is a 20x4 charecter display.Which uses HD44780 controller. Is there a way to access Pi 0 GPIOs from Uboot? So that I want to show some initial message on L CD while Linux gets loaded. I appreciate any inputs, thanks in advance.

Hi I am very new to computers. I have a raspberry pi 3 and just bought a orange pi one. My problem is I am unable to download an operating system to my working raspberry to burn to an sd card to be able to use the orange because the raspberry doesn't have enough space on my memory card. Do any of you know a company or person that could sell me an o/s that is already on a card for the orange, I have been hunting for ages for a site that sells something like noops for the raspberry. I have read that armbian edge might be the right choice if i can get it. Any help appreciated.

Hello to everyone! I am trying to configure dual boot using u-boot. But I've got some misunderstandings, maybe someone will help me with that problem. When I'm booting from SD card everything works fine: rootdev=/dev/mmcblk0p1 (armbianEnv.txt) or rootdev=UUID=XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX in both cases. When I'm booting form eMMC something goes wrong: I can not set rootdev=/dev/mmcblk1p1 cause in this case I've only error message: But if I'm setting as rootdev=UUID=XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX everything works fine. Maybe it is bad way to use /dev/..., but I need it. So, I tried a lot …