Allwinner sunxi

So we get the Banana Pi M2+ killer soon it seems, just stumbled accross the 'NanoPi M1 Plus' in FriendlyARM repo: https://github.com/friendlyarm/h3_lichee/blob/master/tools/pack/chips/sun8iw7p1/configs/nanopi-h3/boards/sys_config_nanopi_m1_plus.fex According to fex file we get: H3 with primitive voltage regulation (1.1V/1.3V) and therefore 1200 MHz max eMMC AP6212 Wi-Fi/BT 40 pin header identical to M1 2 leds as usual (red/blue) Gigabit Ethernet 24 pin camera connector compatible to M1/Air 1 x USB OTG, 3 x host 2 x host (maybe the 3rd host port somewhere on headers) I would assume same board layout as NanoPi M1 now but one USB type A receptacle less and there the e…

Hi all, A week ago I started using the latest Armbian image (Legacy Desktop) for my Olinuxino A20L2. Since the switch from the Olinuxino A20 original image back to Armbian I noticed a lot of performance loss. Especially when surfing the web through Firefox on even simple pages is sometimes terribly slow. Anyone have an idea how to solve this?

I encountered a very strange boot behavior on OrangePI Plus 2E. When I boot from SD card with the desktop Armbian image, I'm having just an input of some color on HDMI (photo attached). No U-boot output on screen, but considering UART output both U-boot and system boot with no errors (log file is attached). Boot with the server Armbian image goes just fine, except no U-boot output on screen (only on UART) and screen resolution is 1280x720, while native resolution for the display is 1920x1080. Until recently everything worked just fine with both desktop and mainline images, and U-boot giving proper output on screen in 10920x1080 resolution. What I tried so far: …

After latest update and reboot my Banana Pi Pro does not boot. The boot screen is showing but when it starts loading the kernel, the screen just turns dark and a blinking cursor in left upper corner just appears. What to do?

Hi everyone. I have nano pi neo core 2 with ARMBIAN 5.75 stable Debian GNU/Linux 9 (stretch) 4.19.20-sunxi64. I try to change i2c speed from 100 000 to 400 000. I try: sudo fdtput -t i sun50i-h5-nanopi-neo-core2.dtb i2c0 clock-frequency 400000 Error at 'i2c0': FDT_ERR_BADPATH Anyone have idea how to change i2c speed?

Hi! I am trying to use Armbian 23.5 Jammy XFCE for new Orange Pi Zero Plus 2. I have TTL-USB connection through Serial port. In pyutty window i see log U-Boot SPL 2022.07-armbian (May 27 2023 - 19:28:04 +0000) DRAM: 512 MiB Trying to boot from MMC1 U-Boot 2022.07-armbian (May 27 2023 - 19:28:04 +0000) Allwinner Technology CPU: Allwinner H3 (SUN8I 1680) Model: Xunlong Orange Pi Zero Plus 2 DRAM: 512 MiB Core: 65 devices, 18 uclasses, devicetree: separate WDT: Not starting watchdog@1c20ca0 MMC: mmc@1c0f000: 0, mmc@1c10000: 2, mmc@1c11000: 1 Loading Environment from FAT... Unable to use mmc 0:1... In: serial Out: serial Err: serial Net: …

Hy everybody, I have a fiber connexion at home. for my work, i tried to connect my Bananapi to my ONT (Optical Network Termination). My provider, Orange use pppoe with the vlan 832 for Internet. So i have installed the Packages vlan,ppp,pppoe. In /etc/modules i have added 8021q. in /etc/network/interfaces : auto eth0 eth0.832 ppp0 iface eth0 inet manual iface eth0.832 inet manual iface ppp0 inet ppp provider ft_fibre I have created /etc/ppp/peers/ft_fibre like this : pty "/usr/sbin/pppoe -I eth0.832 -T 80 -m 1452" noipdefault hide-password lcp-echo-interval 20 lcp-echo-failure 3 connect /bin/true noauth …

After figuring out how to enable analog audio on the Lime2 (https://forum.armbian.com/index.php?/topic/4224-analog-audio-on-lime2-with-stable-kernel-version-49/), I now have the problem that there is a clearly noticeable mainline hum whenever no sound is playing. The hum goes away as soon as any sound is playing on the device, and it returns a couple seconds after the sound stopped. It appears like some kind of power saving feature kicks in. With the legacy kernel the hum goes away during boot and does not return. Any ideas?

Hello, I had a telecommunication technician logged onto my router + later that night a power outage. Now my pi (not sure before or after or related to anything), now the lights go on the pi (both + the one on the network), I can see it on the router with an IP but that is it. I can't logon to it on that IP with Putty nor can I ping it from the console on the PC. I tried now 3-4 of the builds (older ones, one official one and so on) with the flash card, but always the same. I don't have an USB to TTL converter to try that route. Is there anything else I can do? There is no way to do a hard reset, right?

Hello there. I have problems with connecting device with 1-wire protocol. Device: DHT11 Temperature-Humidity Sensor - It is Arduino version with pullup on the board. Board: Orange Pi Zero LTS (H2+) System: Linux orangepizero 5.10.21-sunxi #21.02.3 SMP Mon Mar 8 00:28:04 UTC 2021 armv7l armv7l armv7l GNU/Linux Based on instructions im preformed some steps: 1) Through armbian-config im enabled w1-gpio 2) Installed gpio app to get info about ports: +-----+-----+----------+------+--Orange Pi Zero--+------+----------+-----+-----+ | H2+ | wPi | Name | Mode | V | Physical | V | Mode | Name | wPi | H2+ | +-----+-----+------…

I'm considering buying a Banana Pro, and I assumed I could just install a standard version of Debian Jessie directly from the official installer according to this and this, albeit without graphics or audio support. But then I came across this page and I'm not quite sure I understand the differences between Igor's images and regular a Debian installation. Is it the just the option to choose sunxi/4.0.5 kernel, some (or rather, a lot of) tweaks and scripts and drivers for misc components (IR, LVDS, etc)? I plan to use it as a headless server, what would be the advantages of running Igor's images vs a regular install? Also, on a separate question, is there any other bo…

Hello, I was tweaking the dvfs table on my OrangePI PC to find the maximum efficiency sweet spot. I noticed that no way I change the dvfs table, the maximum frequency is always 1296 Mhz. This is the very simple dvfs table I'm using now: [dvfs_table] pmuic_type = 2 extremity_freq = 1200000000 max_freq = 1200000000 min_freq = 480000000 LV_count = 2 LV1_freq = 1200000000 LV1_volt = 1240 LV2_freq = 480000000 LV2_volt = 980 but this is the result of an excerpt cpufreq-info command for cpu0: driver: cpufreq-sunxi CPUs which run at the same hardware frequency: 0 1 2 3 CPUs which need to have their frequency coordinated by software: 0 1 2 3 maximum transition…

Hi, I'm using a CubieTruck running Armbian 5.8.16. /dev/ttyS2 works fine if I use the 4.19.62 dtb but not when using the 5.8.16 dtb. I am using the uart2 overlay and param_uart2_rtscts. If I try to access the port with picocom it reports "Filedes is not a tty". Commenting the param_uart2_rtscts line makes no difference. It appears that uart2 isn't being setup as a serial port when using the 5.8.16 dtb (and overlays). But the kernel must be okay because it works with the old dtb. Does anybody have a solution here ? Or can you tell me where the sources for the dtb and overlay are ? The copies on github seem old. Thanks, S…

First time working with usb_f_uac1. Running buster image. I have a configfs setup that hosts are able to enumerate but the attributes for capture (c_chmask, c_ssize, c_srate) and playback (p_chmask, p_ssize, p_srate) seem to be switched. i.e. c_chmask = 0x3f shows as a 6-channel capture endpoint on both Windows (ksstudio) and macOS (system information) hosts. Is there something I’m misunderstanding here? Is there something I’m not doing correctly?

Hi, In kernel 4.1, we have dmesg spammed by: [84320.834217] clocksource hstimer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 238907555784 ns It should disappear in 4.2. If you need to repair it now, you can patch it yourself: http://permalink.gmane.org/gmane.comp.hardware.netbook.arm.sunxi/17500 D.

Hello wonderful people! I am having trouble getting my SSD1351 1.5" RGB SPI OLED working with my NanoPi Neo v1.4 running armbian 23.11.1 with kernel 6.1.63.. Since the removal of fbtft_device from the linux kernel I have had a really hard time getting any screen to work with any of my SBC's (except RaspberryPi using the fbcp_ili9341 library) I have tried converting fbcp_ili9341 for use with the NanoPi but I keep getting "Failed to load VideoCore kernel Mailbox"... so I gave up on that lol.. Then I learned dtoverlay was a thing and after days of searching around I eventually found a .dts file for the SSD1351 here (https://github.com…

Hi, We've built a network experimentation system using NanoPi R1 modules, but when load testing the system with iperf3, we are seeing the on-board RTL8152 interface enter a state where it does not seem to be responding until the board is power cycled. The system consists of 32 NanoPi modules connected in a torus, with the 1Gig interface connected to its neighbour's 100Mbit interface. An additional USB Ethernet dongle functions as a control interface. The modules are powered from a Ubiquiti PoE switch, using this type of isolated PoE splitter. Eyeballing the switch UI, power consumption per node seems to hover between 2.3W-3.5W, depending on load. W…

I noticed that the Cubie a5e would reboot when anything that draws moderate power (>100mA) was connected to the USB3 port. Thought it was my power supply or USB cable, but after changing that out and doing some testing, I have determined that the reboot problem doesn't happen with the Radxa Bullseye image, only with the Armbian Trixie. I haven't had a chance to test older Armbian builds to see if it broke somewhere along the way, but that's what I'll do next. Armbian boot (26.2.0 trunk 385): U-Boot SPL 2026.01_armbian-2026.01-S127a-P96c6-H560c-Va7f1-B2eb2-R448a (Feb 03 2026 - 12:13:55 +0000) DRAM: 2048 MiB Trying to boot from MMC1 NOTICE: BL31: v2.13.0(debu…

I am a long-time Linux user, who casually and confidently and regularly uses the software 'Update Manager' in Linux Mint to keep my software up-to-date. I also have no problem using 'apt update' to update specific software packages. What I am more careful about is ever using 'apt upgrade' and 'apt dist-upgrade' -- almost never doing so. What advise is there for updating the software on my Armbian Orange Pi PCs? darren@frodo10:~$ sudo apt list --upgradable Listing... Done armbian-config/stretch 5.45 all [upgradable from: 5.38] armbian-firmware/stretch 5.45 all [upgradable from: 5.38] tzdata/stable-updates 2018e-0+deb9u1 all [upgradable from: 2018d-0+deb9u…

Hello, I am opening new topic because I simply cannot get monitor running on 1280x800. I only get shrinked picture, that isn't that I am looking. I also cannot understand how to add new resolution to kernel. Please help, thanks all in advance

Hello, first tried building "https://github.com/igorpecovnik/lib"on ubuntu 14.04-Desktop, but "./compile.sh" failed and let crash the internal-terminal-gui-prog. Today I tried on 14.04.3-Server-Fresh-installed in a vmware, but "./compile.sh" fails too: ------------------------------------------------------------------ image : R1-> Jessy-> with_XFCE-> kernel_3.4.x ------------------------------------------------------------------ ... .. . make KBUILD_SRC= CHK include/linux/version.h CHK include/generated/utsrelease.h make[3]: `include/generated/mach-types.h' is up to date. CALL scripts/checksyscalls.sh CHK include/generated/c…

I have an orange pi+ 2e that is being used for pihole. I want to set my pi to use 1 cpu core, disable usb ports and set Ethernet link speed at 100Mb/s etc to reduce consumption however not all the changes will apply at once (see picture attached) If cpu is running at one core and ram at reduced speed, ethernet link speed will still be at 1gbps and the other way round when Link speed is at 100Mbps.

I've no problem using my Banana Pi with a wifi connection. But if I plug it on my router with a ethernet cable it crashs after a short time. Should I upload the output of armbianmonitor when ETH is plugged? Because it will take me a few tries, to do that.

Hi, I have been working on this problem for a few days. I have a orangepi plus2e and orange pi 5'' lcd. When I make all the connections and give power to the orangepi, I can not see anything on the LCD. At first only a white light comes out. Later on, I looked at the 5 inch screen produced by OrangePi with 640x480 resolution and the LCD settings on the H3 boards. I tried to set the resolution with the h3disp command, but I did not see the proper resolution. I did these on a different computer screen, and when I changed the resolution, nothing appeared on this screen.

Hello, I know this is slightly the wrong subforum... I'm using an OrangePi PC2 with ARMBIAN 5.34.171109 nightly Ubuntu 16.04.3 LTS 4.13.11-sunxi64 I tried installing rpimonitor using rpimonitor -r after creating a "pi" user and a "pi" group That part worked. Afterwards, it told me that the webserver would be available at 192.168.0.xxx:8888 I tried that. Surprisingly, not the customized version of OrangePi-Monitor appeared, but the "original" RPI Verison. I fixed that copying /etc/rpimonitor/template/OrangePI_xx.conf to /etc/rpimonitor/template/data.conf. After restarting, it actually works, but placeholde…

Hi All! I had the same problem with several different kind of wifi SoC-s on an R1 board, with different operating systems: wifi is slow and unreliable in AP mode. Both with integrated RTL8192CU, an external RTL8192EU, RT3570 and RT5370, various Atheros chipset based dongles - all of them is very slow. I had no any problem on single-eth BananaPi board, but i got less than 2mbit up/download speed on a 30mbit+ network... I tried several OpenWrt versions (official 1,2,3 and latest trunk), now i tested Igor's ubuntu with the same result: slow and lagging Do You have same experience? Or is it working fast? Any idea? Best regards, Peter

Hello, I need to use an IRQ interruption with a button. I mean, I push a button, and then a code is executed. Some information: The PIN is PH19, EINT19. and the board A20 SOM. Armbian SO, kernel 4.13 Firstly i configure the digital pin and IRQ from user space: echo 243 > /sys/class/gpio/export echo "in" > /sys/class/gpio/gpio243/direction echo "falling" > /sys/class/gpio/gpio243/edge Now, when I push the button, I can monitoring the IRQ and the counter related to cat /proc/interrupts But now, how can I run a program when the interruption event happens ? I have seen this u…

I am using fresh installation of armbian legacy server version 3.4.113 on the Orange Pi Zero Rev v1.1. The FEX file seems to be incorrect. Some driver or process is blocking PA10, which is wired directly to the expansion header pin 26. According to the schematics, this port is not used anywhere else. # cat /sys/kernel/debug/gpio GPIOs 0-383, platform/sunxi-pinctrl, sunxi-pinctrl: gpio-10 (? ) out hi gpio-17 (red_led ) out lo gpio-202 (xradio_irq ) in lo gpio-354 (? ) out hi gpio-362 (green_led ) out hi In case i am the first one that tested this: gpio-10 aka PA10 aka ? is blocked gpio-17 aka …

Hi, I have 5.25 without armbian updates - just Debian: Linux lamobo-r1 4.9.7-sunxi #1 SMP Thu Feb 2 01:52:06 CET 2017 armv7l GNU/Linux. When I boot the device, it comes up fine, gets its IP-Address on the WAN port. If I try to restart the network it will not come up, I can access via UART but no longer via Network. If I restart the network from the UART again with the same command the Network comes up. This is how it stops: root@lamobo-r1:~# service networking restart Warning: Unit file of networking.service changed on disk, 'systemctl daemon-reload' recommended. less /var/log/syslog | grep NetworkManager: Spoiler root@la…

Hi, my environment is: Orange Pi One ARMBIAN 5.34.171031 nightly Ubuntu 16.04.3 LTS 4.11.12-sun8i WiringPi fork by WereCatf: git clone https://github.com/WereCatf/WiringOP.git -b h3 ./build small c++ programm: #include <stdio.h> #include <string.h> #include <errno.h> #include <stdlib.h> #include <wiringPi.h> #include <pthread.h> static volatile int globalCounter; void myInterrupt(void) { ++globalCounter; printf("InterruptCounter: %5d\n", globalCounter); //digitalRead(7); } int main(void) { if (wiringPiSetup() == -1) { print…

On legacy kernel, Armbian_5.10_Bananapipro_Debian_jessie_3.4.112.7z, if I use /boot/script.bin with https://github.com/LeMaker/fex_configuration/raw/master/bin/banana_pi_35lcd.bin, my lcd works properly. But on Vanilla kernel, Armbian_5.10_Bananapipro_Debian_jessie_4.5.2.7z, if I change /boot/script.bin with https://github.com/LeMaker/fex_configuration/raw/master/bin/banana_pi_35lcd.bin, my lcd doesn't work. What should I check more?

Igor please help me Tried again to run with 4.1.6. Cubietruck is needed online. He thought for a moment, then got all che need for dhcp and gave the console. Only one problem... can't lift the access point, ifconfig sees wlan0, iwlist sees wlan0, but hostapd does not work there is no BCMDHD module, (not running modprobe bcmdhd) what to do? Igor please help. root@gate:~# modprobe bcmdhd modprobe: FATAL: Module bcmdhd not found. How to translate the adapter in Ap mode? where to get the module? there are modules b43, brcm80211, rt2x00, rtlwifi but they are not suitable. in the distribution which was used before - it worked thanks in advance!!!

Hi guys! I am making a separated network to connect my OPi3 to my old notebook to run some codes of my research. So, the problems is with ethernet connector in Orange Pi 3 that when I connect the cable from OPi3 to my switch LEDs just flash slow and in big intervals. When I try to ping from OPi3 to computer the ping just happens after big time later. I verify the cable and the switch with other devices (my personal notebook and my notebook from work). Everything is ok and running well. One thing blow my mind: when I connect cable from OPi3 directly to my notebook the LEDs of ethernet of OPi3 works normally but in the armbian the networks not alway…

Please help me. I have (had?) armbian Ubuntu 16.04 legacy installed on NAND. Today I upgraded 13 packages and now the system does not boot anymore. Black screen and only the red led id on. What I didi wrong? And is there a way to recover the system (e.g. using an old copy in the SD)? This is the output: The following packages will be upgraded: armbian-firmware armbian-tools-xenial libnss-myhostname libpam-systemd libsystemd0 libudev1 linux-headers-sun7i linux-image-sun7i linux-u-boot-cubietruck-default linux-xenial-root-cubietruck systemd systemd-sysv udev 13 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. Need to get 140 MB of archives. After …

I tried to create my own image using the build script for Orange Pi Zero. But starting this crashes immediately. Any suggestions? U-Boot 2017.09-1 (Oct 13 2017 - 11:04:53 +0200) CPU: Allwinner H3 (SUN8I 1680) Model: Xunlong Orange Pi Zero DRAM: 512 MiB MMC: SUNXI SD/MMC: 0 *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: phy interface0 eth0: ethernet@1c30000 Hit any key to stop autoboot: 0 switch to partitions #0, OK mmc0 is current device Scanning mmc 0:1... Found U-Boot script /boot/boot.scr 3382 bytes read in 125 ms (26.4 KiB/s) ## Executing script at 43100000 U-boot loaded from SD Boot script loaded f…

I cannot compile this module - https://github.com/uboborov/sunxi-cedar-mainline I get this: root@bananapim2zero:/usr/src/sunxi-cedar-mainline# make arch=ARM KERNEL_SOURCE=../linux-source-5.10.60-sunxi make -C ../linux-source-5.10.60-sunxi M=/usr/src/sunxi-cedar-mainline modules make[1]: Entering directory '/usr/src/linux-source-5.10.60-sunxi' MODPOST /usr/src/sunxi-cedar-mainline/Module.symvers ERROR: modpost: "arm_copy_to_user" [/usr/src/sunxi-cedar-mainline/cedar_ve.ko] undefined! ERROR: modpost: "arm_copy_from_user" [/usr/src/sunxi-cedar-mainline/cedar_ve.ko] undefined! ERROR: modpost: "kmem_cache_alloc_trace" [/usr/src/sunxi-cedar-mainline/ceda…

Hi, I'm wondering if I can use your images for running an audio streamer, outputing digital audio via USB Audio Class 2 (for connection to an external DAC). at : http://www.igorpecovnik.com/2014/11/18/olimex-lime-debian-sd-image/ you mention that it does not have audio driver : does this mean that even USB audio cannot be achieved ? If not, any hints on why this is not supported ? Thanks!

Hello, using newest Legacy Image Armbian_5.04_Cubietruck_Debian_jessie_3.4.110 there is still a wifi problem while booting. Correct? For more than one minute the boot process hangs showing following error message: "A Start Job is running for LSB: Raise network interfaces" After one minute the boot process continues. The wlan0 connection gets somehow established. But it is slowly und not really stable. root@cubietruck:~$ cat /etc/network/interfaces auto eth0 iface eth0 inet dhcp auto wlan0 iface wlan0 inet dhcp wpa-ssid My-SSID wpa-psk My-Password auto lo iface lo inet loopback root@cubietruck:~$ lsmod Module Size Us…

Hi, I have problems with the versions "Armbian 5.25 Orangepizero Debian jessie default" and 5.26. When i install Nginx, the directory "nginx" is created in /var/log/. After a "reboot" the directory is then "disappeared", not possible to start Nginx. I can create the folder with error.log and access.log and restart Nginx. After this, it runs. After a reboot again, nginx is missig again... Any hints? The same happens with 5.25 and 5.26 on OrangePiOne, so far tested... I thing i'm not the only one with this problem. (I testet with "root" permissions only)

Hello, I have OPI0 with Ubuntu 20.04.1 LTS with Linux 5.8.6-sunxi and I would like to set 240 MHz as minimum frequency. cpufreq-info shows that available steps starts at 480 MHz but on older kernel 240 MHz and 120 MHz were available too. I also tried to "force" 240 and 120 by editing /etc/default/cpufrequtils but no go. Lower reachable frequency is 480 MHz and what I see are a bit CPU higher temperatures. cpufreq-info cpufrequtils 008: cpufreq-info (C) Dominik Brodowski 2004-2009 Report errors and bugs to cpufreq@vger.kernel.org, please. analyzing CPU 0: driver: cpufreq-dt CPUs which run at the same hardware frequency: 0 1 2 3 C…

Hey, I recently decided to give the 22.11 a try on my M1, but I can't get my sata SSD to be the system root and boot again. 18.04 it worked for me with the exact same setup. I used this: https://docs.armbian.com/User-Guide_Getting-Started/#how-to-install-to-emmc-nand-sata-nvme-usb went with armbian-install only option for me was boot from SD and system on sata. But after the preparation of the ssd, the reboot always runs into emergency mode with not really good hints how to solve, or what even the issue is. Any tips or hints are welcomed.

With every upgrade I struggle with a "changed to default" login welcome message and have to do my modifications again. Therefore I would like to explain my changes and hope you can integrate them in the default version...: Your welcome message prints the $BOARD_NAME as ASCII art. Probably you have dozens of boards and can distinguish them in this way. So after login-in you directly see which board it is. I have only one type of "boards" (Cubietruck) and distinguish them by their hostname. So I have to replace "$BOARD_NAME" with "$(hostname -s)" in /etc/update-motd.d/10-header to identify my boards. What do you think about a change in that direction?

Hello, I'm working on a project which include a microcontroller and a NanoPi NEO Core running Armbian FriendlyCore distribution. The NanoPi is wired to the µcontroler ICSP which can reset the µcontroller for update purpose. The allwinner H3 datasheet state that the GPIOA6 (the one linked to ICSP) should start with HIGH-Z and no resistance pulling, it seems to do so but a few second after reboot it seems to go low as all other GPIO... resulting in an unwanting reset of the µcontroller. Is there a way to change this by setting the default state somewhere in the system, or should I have to use dts files or core compilation ? Any solution would be appreciated. …

Hi, I am trying to use the two UARTS on the I/O pins which are UART 1 and UART 2 mapped to PG6/PG7 and PA0/PA1 respectively. I have had a look at the FEX file and these seem to be mapped correctly to UARTS's port 1 & 2 so I would expect these to be mapped to /dev/ttyS1 and /dev/ttyS2 but this does not seem to be the case. If I try to connect to these UARTs using screen I simply get the message: - root@orangepizero:~# screen /dev/ttyS1 9600 [screen is terminating] I have tried searching these forums and Google but have not really found anything - any help or pointers in the right direction would be much appreciated. Gerry

Hi, I have a mainline installation of Armbian (Debian) on my banana pi on which I want to control a display from within java. Version of the kernel: Linux bananapi 4.11.6-sunxi #6 SMP Fri Jun 23 19:56:18 CEST 2017 armv7l GNU/Linux The connections I use are as followed: LCD Python lib PI4J WR 23 4 RD N.U. N.U. DC 24 5 CS N.U. N.U. RESET 25 6 …

Hello together, I'm trying to activate composite output on my BananaPRO. First of all, I've added setenv command to my boot.cmd: setenv video-mode sunxi:1024x768-24@60,monitor=composite-pal,hpd=0,edid=0,overscan_x=32,overscan_y=20 then mkimage -C none -A arm -T script -d boot.cmd boot.scr copied boot.scr to sd-card and reboot. In u-boot I see: but my monitor (DELL 2007FP with composite input) and my TV (Panasonic Plasma) are still black. Any ideas? Thanks!

I'm trying the new version of armbian for orange pi plus 2 . Is there some news to create an access point ? I saw there are some files and other files not Does someone could link to me some tutorial for the access point? I have several usb dongle wifi and wifi on chip After a lot of web sites I visited I'm not able to create an access point thanks

Hello, I have a NanoPi Neo Plus 2 I used to run Ubuntu Core on it but i wanted to switch out as i had less storage space available 4.7gb out of 8 and other issues as it was also out of date. I installed Armbian first on SD then on eMMC but the problem i am facing is that only 479mb of ram is available. Now in the first post on this board by Stanislav Sinyagin on July 18, 2017 it was stated that only 512 mb of ram was available but later on i saw posts of people with the whole 1Gb of ram being used. Due to the limited ram i get compilation problems among other things i am using this board headless as a server. i flashed all versions for download multiple times along with t…

Hello, I'm trying the currently offered Armbian Bookworm images for the Orange Pi Prime, using kernels 6.1.30 and 6.2.16, and notice that there is no support for SoC temperature monitoring, neither in armbianmonitor, nor in /sys/devices/virtual/thermal/. Here is the debug info from 6.2.16: https://paste.armbian.com/cetovulubu Is that a known issue? An older Armbian image that I have downloaded previously, using the kernel 5.15.93, shows the temperature just fine.

Hi there 👋 I've tried the CSC edge images Armbian_23.02.0-trunk_Nanopiduo2_lunar_edge_6.1.8.img and Armbian_23.02.0-trunk_Nanopiduo2_sid_edge_6.1.8.img and the machine does not want to boot. Is there a more stable image somewhere? FriendlyCore boots on this board. Thanks. U-Boot SPL 2022.07-armbian (Jan 30 2023 - 06:49:28 +0000) DRAM: 512 MiB Trying to boot from MMC1 U-Boot 2022.07-armbian (Jan 30 2023 - 06:49:28 +0000) Allwinner Technology CPU: Allwinner H3 (SUN8I 1680) Model: FriendlyARM NanoPi NEO DRAM: 512 MiB Core: 60 devices, 17 uclasses, devicetree: separate WDT: Not starting watchdog@1c20ca0 MMC: mmc@1c0f000: 0 Loading Environment fro…

Hi there. I've got the problem with boot from emmc when empty SD card is installed. Opi PC+ Armbian (debian 9 stretch) Kernel 5.4.20-sunxi I've moved OS from SD to emmc using armbian-config util, then format SD with fat and now when I power on my OPi without SD card all is ok, but when SD installed boot get stuck with error "Script failed", unknown device... I've tried to chang mmc0‘s sdc_detmode, but doesn't have /boot/script.bin Can anyone help? Thank you. Spoiler

Hi. I have made a system with O Pi Lite and Armbian to automate an aquarium from where to control the light, the bubbles and with a webcam I can see the system through the web, everything automated from Cron. From a web page I can turn on and off the lights and bubbles from web buttons. Everything is fine. The problem arises when I want to put some phisical buttons for 3 things: turn off the system, change the state of light and bubbles. I have used a code in Python and the PYA20 library. This is the code. It works very well, but when I start it with the system, the program stop working soon and the buttons stop to work. #!/usr/bin/env python from pyA20.gpio…

I'm using Armbian 23.02 Bullseye CLI. I didn't want the HDMI to show the boot system log and TTY1 login screen. According to the armbian documentation, I changed "console=both" to "console=serial" in /boot/armbianEnv.txt. I checked /boot/boot.cmd related to console, and I confirmed that this modification is OK, but it cannot start, uboot printed "Starting kernel..." After that, there is no output, and the power supply is only 5V 170mA. The following is the printing of the serial port. If anyone has been in a similar situation, please give me a little help, thank you very much. U-Boot SPL 2022.07-armbian (Feb 17 2023 - 22:32:08 +0000) DRAM: 2048 MiB Trying …

hello, when i initial start the Armbian @ Orange Pi PC I was prompted for new user. I put new username as 'ch0mik' but the Armbian make a user and group 'chmik' - without zero. Im ham radio operator with callsing sq7mru and i want to make a user with ma correct callsign (alphanumeric username) Regards Pawel

Hello to everybody... I have a generic bluetooth gamepad https://www.aliexpress.com/store/product/Terios-T3-Plus-Wireless-Bluetooth-Game-Console-Handle-Controller-Gamepad-For-IOS-Android-OS-Phone-Tablet/432261_32573314229.html and i just can't pair it with my BT dongle...any ideas ? Bluetooth dongle : 00:1B:10:00:2A:EC Gamepad : FF:10:18:02:63:25 It gets discovered but i just can't pair it...i have a beelink x2

Hi Everyone. I have been looking for a way to connect this keypad directly to my Orange Pi PC+ directly through gpio without resistors. https://www.adafruit.com/product/1332 I also need software (hopefully either bash or python) to read a key press and then either run a script or perform a command. If anyone here done this or even connected 1 switch to gpio (without resistors), could you please post the solution or a link to follow. Thanks. V

Re: the built-in 16GB emmc on a 14" pinebook (early model). Applies to Armbian_20.02.1_Pinebook-a64_bionic_current_5.4.20.img and also to trunk build with dev kernel. Prevents installation to emmc from SD, which worked from trunk@3b1418fb5b58f187c658a050c592f2c50fb2db04 in January. I haven't managed to find from which commit it started failing yet. It is in some partial/invalid state in u-boot: => mmc list mmc@1c0f000: 0 (SD) mmc@1c10000: 2 mmc@1c11000: 1 => mmc dev 0 switch to partitions #0, OK mmc0 is current device => mmc info Device: mmc@1c0f000 Manufacturer ID: 1b OEM: 534d Name: 00000 Bus Speed: 50000000 Mo…

Hello, I have a cubieboard 2 (the one with only one SD slot) and there is a version of Linaro that is bootable in the NAND memory. I created a card with Debian Jessie Server (the last one) and boot it successfully, but when I run nand-sata-install I get a "No targets available. Please check your drives" pop up. I tried downloading the Debian Wheezy and creating a card and on that one I can see the nand memory blocks, but don't have the script to install and the one that came by default only installs to SATA (not to NAND). Anything I may be doing wrong here??

Hello, I try to build a headless music server, that can - boot from nand then from ssd - audio needs to work, SPDIF and analog - runs mopify - Power on / off via script All Images I tried so far - Ubuntu Trusty, Ubuntu Trusty upgraded to Vivid, Debian Jessie - do somehow not support the Power button. Same to Lubuntu 2.0 stock and Stefanius images. I did install acpid and acpi-support-base I configured systemd as described here http://www.forum-cubieboard.de/Thread-cubietruck-pwr-on-powerknopf?page=3 just does not work. If possible I'd like a latest system - Jessie or Vivid, but thats secondary. Cubietruck_Debian_4.0_wheezy_3.4.108 - apt-get update &am…

So I apologise in advance because I'm sure it's probably on this forum but I could not work out the buzzwords to find it. For whatever reason, I upgraded the cubietruck with armbian which has been on since forever and rebooted for the first time this year. On reboot it failed to find /boot and a few other things and kept bootlooping, resetting itself and then following the same procedure. I already had installed the system to my SATA SSD, so this isn't a huge deal. I've flashed the latest armbian release onto the SD card and it boots fine. Now, I see there is an install to sata option in armbian-config but it gives me the warning that it will wipe …

Hello, I have Orange Pi 3 board. Panfrost drivers works fine bud I accelerated video not working. I have trouble with the drivers... I compile https://gitlab.freedesktop.org/vdpau/libvdpau and https://gitlab.freedesktop.org/vdpau/vdpauinfo When I run vdpauinfo I get: Failed to open VDPAU backend cannot open shared object file libvdpau_sun4i-drv.so No such file or directory Bud i dont know hot to make this .so file... Thank you. ==================================================================================== EDIT (i can post to here only one message per day...). Here is more informatio…

Trying to run mainline kernel on allwiner V3. U-boot: compiled and successfuly runs with some patches. After starting u-boot, I'm loading dtb and kernel into memory and trying to boot the kernel, but nothing happens. I need any help to solve a this issue. Скрытый текст diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 43951a7731..af7d16076a 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -693,6 +693,7 @@ dtb-$(CONFIG_MACH_SUN8I_V3S) += \ sun8i-s3-elimo-initium.dtb \ sun8i-s3-pinecube.dtb \ sun8i-v3-sl631-imx179.dtb \ + sun8i-v3-dv8000-imx179.dtb \ sun8i-v3s-licheepi-zero.dtb dtb-$(CONFIG_MACH_SUN50…

For a long time, for more than three years, I did not use my BananapiPro board. And recently I decided to launch it again.I downloaded new Armbian image distribution. But the system when loading gives out an error. After the initialization of the devices, a message appears: Device 0: unknown device ethernet@1c50000 Waiting for PHY auto negotiation to complete......... done Speed: 100, full duplex BOOTP broadcast 1 DHCP client bound to address 192.168.2.200 (5ms) *** Warning: no boot file name: using 'COA802c8.img' Using ethernet@1c50000 device TFTP from server 192.168.2.1; our IP address is 192.169.2.200 Filename 'COA802C8.img'. Load address: 0x42000000 Loading: T T T …

Hi to all, I have been using banana pi pro and m1 for some years as mini PBX with asterisk, due the stop of bananian's development that works perfectly but now is obsolete and vulnerable, i'm testing armbian but registered prompt audio sounds choppy and i can't find reasons, I tried to move files in ram disk, use usb to lan interface, increase process priority, use performance ad cpu governor, also tried Armbian 5.83 Bananapi Debian stretch next, same problem. Any suggestion ? Thanks advance.

Hello everybody! I would like to make a home media server with my HDD connected to Banana Pi (on SATA). I want to run Torrent client with WebUI, dlna and VPN server thereon. I`m stucked with fstab file configuration. First I tried to format my HDD`s partition to NTFS, every permission was good, but Transmission download, and FSTP file download was incredibly slow (4MB/s, but I have gigabit internet connection). The fstab configuration was this: UUID=<the uuid of the ntfs partition> /mnt/DataHDD ntfs defaults,auto,umask=000,users,rw 0 0 I`ve readed that, ext4 filesystem can be faster, so I decided to format the partition to ext4. After that, I changed…

Hi everybody, just downloaded Armbian_5.30_Orangepizero_Ubuntu_xenial_default_3.4.113 and flashed. I can see "orangepizero" in network, also ip is pingable but ssh port is closed. Is it a known issue? Armbian_5.30_Orangepizero_Debian_jessie_default_3.4.113 from archive works fine. Thanks

Can we switch a 64 bit image from downloads section to 32 bit kernel, repos and apps? I want a 32 bit (armhf) build server, but can see 64 bit OS images only. Do I need to build my custom armbian image? Are there command line examples for build script that produces armhf image instead of aarch64? I prefer H6 SoC instead of H3 because H6 is two times faster than H3, but the price of H6-based boards is very similar to H3-based boards. Thanks in advance

Hi, A few weeks ago I downloaded the actual Debian Buster version without desktop. I installed the OS and moved the filesystem to the attached SATA disk. Finally I installed and configured Samba and tested it transferring files form my desktop. Everything worked fine except transferring relatively big files. The files (2 in total) giving problems were a about 3Gb. When transferring a big file the upload seems to stop. The ethernet connection with the BananaPi M1 is completely de-activated. There is only one solution to re-activate as far as I know: remove the power connector and resupply the board. After resupplying the board…

Hi, I'm trying to activate WiFi access point on my Orange Pi that using internet over ethernet cable. On my friend's computer we've flashed and activate Access point on armbian-config menu, but in newer releases of armbian(that i've downloaded yesterday) armbian-config menu doesn't contain such option to activate access point. I want to know how to activate access point in current release, or can i? Thanks in advance.

Hi, I have a BananaPi and BananaPi Pro connected to the Lemaker 7" TouchLCD. When I boot the system, I can't see any console output. I only see a flashing cursor in the left top corner and then it starts the X-window-manager. What do I have to change to see the boot messags on my LVDS LCD? I have tried to change the console=both value to tty0 or tty1 via armbian-config, but this doesn't work. Any ideas? Here is the output from cat /proc/cmdline: root=UUID=e9635572-227e-485c-b76d-b4f0d6d34394 rootwait rootfstype=ext4 console=tty1 console=ttyS0,115200 hdmi.audio=EDID:0 disp.screen0_output_mode=1920…

Hello everyone, brand new user of BananaPi and armbian, just today and I've spent quite a few hours trying to make the basic setup for WiFi work with no success. Initially I used the server version I downloaded from the main armbian page and then the "nmtui-connect" command. What happens is that it keeps asking me for the password (definitelly correct) and never accepts it. Looking at the NetworkManager logs while this is happening shows me this J Spoiler an 17 22:25:28 bananapim2plus NetworkManager[581]: <info> [1516227928.9166] Config: added 'ssid' value 'The Portal of Infinite Realities' Jan 17 22:25:28 bananapim2pl…

Hello everyone! You need to run an orange from battery power. I achieved by lowering the frequency of the current to 160mA. But I can't turn off the GPU. since I don't need it and ethernet. uname -a Linux orangepione 5.9.14-sunxi #20.11.3 SMP Fri Dec 11 20:31:12 CET 2020 armv7l GNU/Linux root@orangepione:~# I installed the h3consumption utility, but it does not output information to the console. root@orangepione:~# h3consumption -p root@orangepione:~# from teams root@orangepione:~# h3consumption -g and root@orangepione:~# h3consumption -g off change but no current. I think the core is very new. I don’t know which way to go,…

I'm new to cubietruck and linux as well. I used the default build for CT i.e. 3.4.107. The wlan0 was working fine. It was using bcmdhd module for wireless. But I had to move the latest version 4.0.5 for the availabilty of sctp module which was not available in 3.4.107. In 4.0.5, the wireless interface is not being detected and it has brcmfmac for wireless i think. Is there a way to implement the sctp in 3.4.107 or make the wireless work in 4.0.5 ? please advise. best regards, Arun

Hi, I've tried setting up an SD Card to boot from and I'm getting the strangest issues. I've tried multiple images and even compiled my own and I'm getting the same issue. I'm booting from SD Card because I have the stock ubuntu running on the emmc right now and I don't want to flash that until I know the image works the way I want it to. Here are the logs I've got from the console on boot. I followed the directions with 7z and Etcher from the documentation page. Thanks for the help! starting USB... USB0: USB EHCI 1.00 USB1: USB OHCI 1.0 scanning bus 0 for devices... 1 USB Device(s) found scanning usb for storage…

Hi, I am using orangepizero with Armbian_5.30_Orangepizero_Ubuntu_xenial_default_3.4.113 ubuntu server image. I have also installed mate desktop environment to enable my desktop on my waveshare 3.2 LCD. Now the issue is my desktop freezes in my LCD couple of minutes after boot. I have used heatsink with fan, armbianmonitor show operating temp 40-50 deg cel and cpu load when i run any application 30-40%. I observed one thing when my desktop freezes in my LCD, i can access my orangepi with VNC as separate session where i can see my desktop and perform any task flawlessly without any freeze. Any help here?

Hi all, So I have like 30 opi zeros using armbian image I set one up with a basic system i need I then made an image of its card and duplicated 30 times It works great.. but... they freeze on boot sometimes. and at installations it is not always easy to access the power to reset, plus with so many its a pain to identify which ones have failed to boot and go reset them I am doing some tests in the office now I have one set up which waits for a http hit, and when it get a hit it flips a power relay off for a couple seconds then on again. Another one is connected to the power relay and s…

Hi, I'm tring to solve an issue on my Orange Pi Zero: at boot time the pins PA18 and PA19 are stucked to Vcc. I tried a lot of solution, now the best result is to add at the beginning of the file boot.cmd the command to clear the gpio configuration: gpio clear PA18 gpio clear PA19 and recompile the boot.scr. Despite this the pins goes HIGH for some seconds until the bootloader reach this line. What is the boot scheme? Why i get this pin HIGH? Is it because the I2C1 is configured? Is it possible to disable it? Thanks Simone

Hi! I got a strange problem. When I run apt-get update OPiPC hangs and don't respond to anything. Last thing I see is: root@dbot:~# apt-get update Get:1 http://security.debian.orgjessie/updates InRelease [63.1 kB] Get:2 http://apt.armbian.comjessie InRelease [8,682 B] Get:3 http://apt.armbian.comjessie/main armhf Packages [95.8 kB] Get:4 http://httpredir.debian.orgjessie-updates InRelease [145 kB] Ign http://httpredir.debian.orgjessie InRelease Get:5 http://apt.armbian.comjessie/utils armhf Packages [3,702 B] Get:6 http://security.debian.orgjessie/updates/main armhf Packages [320 kB] Get:7 http://apt.armbian.comjessie/jessie-desktop armhf Packages [7,368 …

I get about 15MB/s read from my samba shares. Is there a nice walk thru on how to find the bottleneck (network, disk, etc)? It's on GbE and I did a quick iperf test that was well above the 15MB/s

Hello, installed nightly image on OPI PC 2. I get a black monitor saying "no signal" and screen is black. But it does not go into sleep mode. Dmesg output is : [ 1.273359] simple-framebuffer 7e05c000.framebuffer: framebuffer at 0x7e05c000, 0x1fa4000 bytes, mapped to 0xffff00000a000000 [ 1.273367] simple-framebuffer 7e05c000.framebuffer: format=x8r8g8b8, mode=3840x2160x32, linelength=15360 [ 1.420280] Console: switching to colour frame buffer device 480x135 [ 1.566153] simple-framebuffer 7e05c000.framebuffer: fb0: simplefb registered! AFAIK simple-framebuffer uses a framebuffer already initialized by the bootloader. So I suppose paramet…

Hello, i like to work with 1wire 18b20 sensors on my Oragne Pi one , with the latest Armbian Bionic . root@orangepione:~# uname -r 4.14.65-sunxi In this forum and in the orange pi forum, there are some instructions, but I think they are out of date. 1.edit your /etc/default/cpufrequtils After edit. $ cat /etc/default/cpufrequtils ENABLE=true MIN_SPEED=480000 MAX_SPEED=1200000 GOVERNOR=interactive 2.reboot Edited by nopnop2002 at 2017-8-5 17:10 1.edit your /etc/default/cpufrequtils After edit. $ cat /etc/default/cpufrequtils ENABLE=true MIN_SPEED=480000 MAX_SPEED=1200000 GOVERNOR=interactive 2.reboot 3.driver load sudo modprobe w1-gpio su…

I have the latest armbian running on Orange Pi Zero (H2+) root@orangepi:~# uname -a Linux orangepi 4.14.18-sunxi #24 SMP Fri Feb 9 16:24:32 CET 2018 armv7l GNU/Linux During boot kernel creates 256 virtual tty devices: root@orangepi:~# ls /dev/tty* [0/433] /dev/tty /dev/tty38 /dev/ttya1 /dev/ttyc2 /dev/ttye3 /dev/ttyq3 /dev/ttys2 /dev/ttytd /dev/ttyve /dev/ttyxf /dev/tty0 /dev/tty39 /dev/ttya2 /dev/ttyc3 /dev/ttye4 /dev/ttyq4 /dev/ttyS2 /dev/ttyte /dev/ttyvf /dev/ttyy0 /dev/tty1 /dev/tty4 /dev/ttya3 /dev/ttyc4 /dev/ttye5 /dev/ttyq5 /dev/ttys3 /dev…

Is there a gc2035 driver module available or in development for the H5? There doesn't seem to be one in the 5.37.171220 build for Orange Pi Zero Plus 2. sudo modprobe gc2035 modprobe: FATAL: Module gc2035 not found in directory /lib/modules/4.14.7-sunxi64 sudo modprobe gc2035 modprobe: FATAL: Module gc2035 not found in directory /lib/modules/4.14.7-sunxi64

On a previous build (and separate board), I have both wlan0 and wlan1 showing up as wireless interfaces on my OrangePi+ board. I have since upgraded the image on a new board, and now I only see wlan0. The software I've written for the board relies on having both wireless interfaces present, however, I'm not sure how to get the other one to show up. I've performed the apt-get update and apt-get upgrade, and then installed the image to EMMC. I've basically got a fresh image, and I'm unsure what I need to do next in order to get the wireless adapters to show up properly. Can someone help me out? Thank you!

This is on a fresh build of Armbian from source. I'm not seeing the camera appearing in /dev/video0, as you would expect. I've tried the solution that @sri suggested on this thread https://forum.armbian.com/index.php?/topic/3225-nanopi-neo-air-cam500b-issue/ but the device is still not visible. Here is the contents of my /etc/modules file #w1-sunxi #w1-gpio #w1-therm sunxi-cir hci_uart rfcomm hidp dhd g_serial ov5640 vfe_v4l2 And here is the output from dmesg [ 0.000000] Booting Linux on physical CPU 0 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux ve…

[WIP] Schematics Pros: - board vendor actively participates (listens to the community, provides information including schematic and cares about correctness, tries to bridge developer community and chip vendor) - board vendor take care of their board configuration and submit patches - board vendor provides dev samples - yet another A64 - good powering method Cons: - none specific to this board

good morning I have an orangepi one and SD with Armbian. Great graphics, but many menus in Chinese and I can not change Does anyone know how to do it? Thanks in advance

Armbianmonitor for 5.4.6: http://ix.io/260C From switching between 4.19.x and 5.4.x kernels I noticed that the lower cpu frequencies got missing. It should start at 120MHz like this: root@horangepione:~# uname -a Linux honeypot2 4.19.84-sunxi #19.11.3 SMP Mon Nov 18 18:39:42 CET 2019 armv7l GNU/Linux root@horangepione:~# cpufreq-info -o minimum CPU frequency - maximum CPU frequency - governor CPU 0 120000 kHz ( 11 %) - 1008000 kHz (100 %) - ondemand CPU 1 120000 kHz ( 11 %) - 1008000 kHz (100 %) - ondemand CPU 2 120000 kHz ( 11 %) - 1008000 kHz (100 %) - ondemand CPU 3 120000 kHz ( 11…

Hello! Is there any way to config the frequency used by the DRAM driver when throttling takes place, or even better, disable the DRAM throttling at all? First of all, I have to say that that I'm pushing my Orange Pi Zero H3 board to run at very hot temperatures due to my CPU throttling settings so I can play some retro arcade games (I know I may burn it). But it seems the DRAM driver has its own throttling settings, and it takes place reducing DRAM frequency to 132Mhz. At such DRAM frequency there is flickering at HDMI output. May 13 18:30:31 inova-casa kernel: [15484.645810] [hotplug]: cpu(0) try to kill cpu(2) May 13 18:30:31 inova-casa kern…

Hi! Can I install a clean Armbian from within Armbian, without flashing a SD-Card? One idea: After installing Armbian, I used the NAND-SATA-install to copy my files to a harddrive. But on the SD-card there is still the old system. Can I switch back to boot the SD-system? Wittenborg

Hello :), I have updated my system from "Armbian_5.35_Debian_jessie_3.4.113" to latest "Armbian_5.53.180722_Orangepizero_Ubuntu_bionic_next_4.17.9". With jessie there will only S0, S1, S2 displayed and Im Working with S1 (Uart1) and S2 (Uart2) from the 13 Pinheader. With Bionic and also Stretch i got S0, S1, S2, S3, S4, S5, S6, S7 and none of them is working. So how can I access the Uart1 and Uart2 with the new Bionic build?

Yesterday I have installed Armbian to my 3-years-old banana-m1 (previosly ran on bananian 16.04 with 4.4.66 kernel) Tiday I have installed rtorrent and tried to download 44 gb file using rtorrent (with lot of seeders). Few minutes, and I got massive bunch of errors [11583.126199] blk_partition_remap: fail for partition 2 [11583.126314] blk_partition_remap: fail for partition 2 ... [11583.136689] blk_partition_remap: fail for partition 2 and USB drive reconnected in ro mode. Then I remount drive, started torrent again and exactly same issue, USB drive disconnected. USB drive connected with external power…

Hello, Im trying to get 2 Uarts working on an Orange Pi Zero+2. Im using armbian Buster image for OPiZ+2 Linux orangepizeroplus2-h3 5.4.43-sunxi #20.05.2 SMP Mon Jun 1 18:26:22 CEST 2020 armv7l GNU/Linux I added UART1, UART2 and UART3 to armbianEnv.txt and was able to read / write on ttyS2 on pins 8 (PA00) and 10 (PA01). But couldnt find which pins ttyS1 or ttyS3 are on. I read at that UART 3 should be Tx PA13 Pin 24 Rx PA14 Pin 23 Is anyone able to suggest which pins I can use for a 2nd UART and is there a file I can look in to find the configuration for the UART Overlays ? Thanks Chris …

Hello, I installed Armbian/(debian jessie) on my Orange Pi Plus (EMMC). Works good, but i can't find the temp of the processor. (lm-sensors don't work/can't detect sensors) What should i do?

Hi! I'm trying to use the image Cubietruck_Debian_3.8_jessie_4.0.4.raw with my CubieTruck, but run into problems when trying to use an external LUKS-disk which is encrypted using aes-xts-plain64. 'cryptsetup luksOpen' informs the following: device-mapper: reload ioctl on failed: No such file or directory Failed to setup dm-crypt key mapping for device /dev/disk/by-uuid/<xxxx>. Check that kernel supports aes-xts-plain64 cipher (check syslog for more info). 'cat /proc/crypto | grep name' lists only this, which seems kinda minimal: name : stdrng name : stdrng name : crc32c name : deflate name : ecb(arc4) name …

Hi All, I'll start with I know this is a dev image...... but I would like to see the 4.x kernels working on the Orange Pi Lite, so would like to be able to find out why it's not and help get that resolved in any way I can. I have 2 images, both were built using the compile.sh: Armbian_5.20_Orangepilite_Ubuntu_xenial_3.4.112.img Armbian_5.21_Orangepilite_Ubuntu_xenial_4.7.6.img I dd'd the 3.4.112 kernel image onto a Micro SD, put it in to my Orange Pi Lite and booted it up and confirmed it was working as expected, the green light flashed, the red one also flashed on first boot, then after the reboot I logged in, changed password etc. I then powered off th…

Just flashed Armbian 20.11.9 for NanoPi Neo 2 with kernel 5.10.4. I have run armbian-config to install kernel 5.10.4 source, but there is no any option for 5.10.x kernel sources, I see only options for 5.8.x and 5.9.x.

Hi, I am trying to write my own kernel module/drive for the NanoPi air, running a self-compiled version of armbian 5.83. Actually I only added the PREEMTION option to get real-time behavior when reading/writing from IO pins. I started using the "hello world" template from here. To get the module compiled I had to build the headers for my kernel as well using the option INSTALL_HEADERS in the armbian-build config file. The build debian-package called "linux-headers-next-sunxi_5.83_armhf.deb" was copied and installed on the NanoPi. OK, so now compiling (on the NanoPi - so no cross-compilation) works like a charm: > make make -C /lib/modules/4.…

Hi, I have just received some shiny new NanoPi Neo 2 boards, hardware v 1.1, model 1711 with 1Gb RAM. I have installed Armbian Stretch mainline kernel 4.19.y with no issues at all however I have noticed that the green LED is pretty well ignoring anything I ask of it. ls -la /sys/class/leds/ total 0 drwxr-xr-x 2 root root 0 Jan 25 16:14 . drwxr-xr-x 52 root root 0 Jan 1 1970 .. lrwxrwxrwx 1 root root 0 Jan 1 1970 nanopi:green:status -> ../../devices/platform/leds/leds/nanopi:green:status lrwxrwxrwx 1 root root 0 Jan 1 1970 nanopi:red:pwr -> ../../devices/platform/leds/leds/nanopi:red:pwr cat /sys/class/leds/…

With the Orange Pi One and the mainline kernel, I can't get it to work optimally when plugged into a gigabit switch. The eth interface on the Pi One is 100Mb/s and it works perfectly when attached to a switch that is 100Mb/s. When attached to a 1000Mb/s switch: [112776.347520] dwmac-sun8i 1c30000.ethernet eth0: Link is Up - 100Mbps/Full - flow control off When attached to a 100Mb/s switch: [112882.431555] dwmac-sun8i 1c30000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx