Other families

Been dreaming of this one for a while. Finally got a weekend to focus on it recently. I'm hoping someone is eager to take what I've done and move It along some more. Here's what we have so far. * a linux 'family' called virtual.conf * a kernel config called linux-virtual-current.config * a board called virtual-qemu.wip The result is a full HVM accelerated armbian image with a kernel compiled with all the virtio drivers for disk, network and video. Also a u-boot.bin made for qemu that can boot the image when used as the qemu bios/firmware I've ran it as a VM on ubuntu using plain qemu on a Ampere eMag box.. and using UTM (qem…

Just wondering if anyone has booted the latest cubox-i test images with kernel 4.9.5 ? I tried the last couple of days with no joy; however I have not got around to full logs / troubleshooting. It looks like it is getting into u-boot OK but then not finding the dtb and drops to the u-boot shell.

when i changed to run the current kernel 5.4.12 the ethernet would work ok, then while transfering over smb/samba to my windows 10 box the ethernet would totally drop, as in the light on my switch went out, not just dropping a few packets!! The only thing that fixed it was to rever "back" to 5.3.11-imx6. Note the change both up to the 5.4.12 and then back to 5.3.11 were performed via the armbian-config tool. (the system is running headless, and the log file does include a boot of "Linux version 5.3.11-imx6" as well as the working 5.3.11 Is anyone else seeing this? JB.

Is there lvds screen compatible with humming board pro version on armbian and if not wich lvds 30pin will u recomend to modify or assist to work on the HB pro

Hi, I've been using my cubox-i 4x4 for close to one year and now after one reboot no hard drive connected to Esata port works. I tried with different debian isos and they work fine on the sd card and hard drives connected to usb ports too.... Any help?

Hey Folks, After the Solid-Run screen I lose HDMI, serial works fine of course. Assuming the Cubox can't use my resolutions by default but I have no idea how to fix. Could anyone please point me in the right direction? $ xrandr Screen 0: minimum 320 x 200, current 1920 x 1200, maximum 16384 x 16384 VGA-0 disconnected (normal left inverted right x axis y axis) HDMI-0 disconnected (normal left inverted right x axis y axis) DVI-0 connected primary 1920x1200+0+0 (normal left inverted right x axis y axis) 518mm x 324mm 1920x1200 59.95*+ 1920x1080 60.00 1600x1200 60.00 1680x1050 59.88 1280x1024 60.02 1440x900 59.90 …

Sorry to be back here I run a Cubox-i. I upgraded to kernel 5.1.16 yesterday. Then I rebooted and everything was running fine. But today my server looked dead: none of my services was answering, no way to ssh to the cubox... I tryied a hard reboot with no success. Here is the log on a putty console: U-Boot SPL 2013.10-rc4-ge4bc4c3 (Dec 18 2014 - 14:55:42) Boot Device: SD1 spl: error reading image u-boot.img, err - -1 Load image from RAW... U-Boot 2013.10-rc4-ge4bc4c3 (Dec 18 2014 - 14:55:42) CPU: Freescale i.MX6Q rev1.2 at 792 MHz Reset cause: POR Board: MX6-CuBox-i DRAM: 2 GiB MMC: FSL_SDHC: 0 *** Warning - b…

I need help please, I am working on NanoPCt3 board based on Armbian_5.83_Nanopct3plus_Ubuntu_bionic_next_4.14.115_desktop I put static ip to eth0 and when i try to ping the output in not stable: 64 bytes from 104.27.115.15 (104.27.115.15): icmp_seq=1 ttl=58 time=580 ms 64 bytes from 104.27.115.15 (104.27.115.15): icmp_seq=2 ttl=58 time=120 ms 64 bytes from 104.27.115.15 (104.27.115.15): icmp_seq=3 ttl=58 time=350 ms and then the output: Destination host unreachable. Destination host unreachable. Destination host unreachable. and i think there are some issues in kernel drivers related on Ethernet or ipv4 so could y…

I am using your Debian (jessie) on the new SolidRun Hummingboard-Edge board. [Linux cubox-i 3.14.14-cubox-i #8 SMP Sun Jul 12 19:03:09 CEST 2015 armv7l GNU/Linux] I am planning on using the RS-485 on the board that is tied to UART2. But I noticed that ttymxc0 (UART1) and ttymc3 (UART4) are the only tty ports that have drivers associated with them. [ "dmesg | grep tty" ] How can I turn on the driver that is associated with UART2 (ttymxc1)? Thanks,

Trying to debug this issue. Everything was fine until a recent reboot and now the box is stuck in a boot loop with any supported image downloaded from armbian. I've been focused with debian but the ubuntu doesn't work either. I have tried 3 different microSD cards (samsung and SanDisk) with the same result. I've tried the steps in https://docs.armbian.com/User-Guide_Basic-Troubleshooting/ https://docs.armbian.com/User-Guide_Recovery/ but it appears that the there is something going on with the Linux kernel? changing the verbosity doesn't provide any new information. I have even tried 20.05.1 and still the same behavior. Any though…

Hi I tried both latest cubieboard images, Fokal and Buster, both stops booting here: U-Boot SPL 2020.10-armbian (Nov 23 2020 - 16:05:27 +0100) DRAM: 1024 MiB CPU: 1008000000Hz, AXI/AHB/APB: 3/2/2 Trying to boot from MMC1 U-Boot 2020.10-armbian (Nov 23 2020 - 16:05:27 +0100) Allwinner Technology CPU: Allwinner A10 (SUN4I) Model: Cubietech Cubieboard I2C: ready DRAM: 1 GiB Yes, I tried different power supplies and SD cards. Any idea what could I do? Thans Chris

Hi, I'm so happy to growth of Armbian, and its good to see that you adding new devices to your device support cartela. But I couldn't find CSC image for Tinkerboard 2. Is that uses same image with RockPi N10 or did you forget to add to download page under to CSC images lists. Bests,

Wheezy: deb http://repo.jm0.eu/BSP:/Cubox-i/Debian_Wheezy/ ./ Repository is online but installations is untested by me.

Hi there ! Quite nooby again - about 10 years off from the deb-world - i beg for patience. Actually three issues: 1. Ultrawide Screens : 2560x1080 @60 (LG 25UW) via HDMI. Got it working on Raspbery (Overclock cpu+GPU/ mod of PixelPipe/ Mem of GPU) How to achieve this on Armbian Wheezy od trusty Desktop ? boot.cmd is ignored (already tried to mkimage it to /boot/boot.scr 2. Wlan Performance Wlan performance unter Wheezy was quite Poor , known issue ?? security.debian.org - gpg-errors with repo - that was funny enough to get started with.. 3. Tried Armbian trusty Desktop. Loads. No Desktop.No Start X? How to get rid of this Prob ? (Whats the…

Hello, I'm trying to get working my NanoPi Fire3 with HD702 screen and I found out some issues. I'm running Armbian_20.02.7_Nanopifire3_bionic_legacy_4.14.174 image on it. -- First and most significant is that the ethernet port isn't working properly. I cannot ping anything and if I try to deactivate and activate ethernet connection in Network Manager it says: Error: Connection activation failed: IP configuration could not be reserved (no available address, timeout, etc.) Mar 31 14:04:05 nanopifire3 NetworkManager[3061]: <warn> [1585663445.9567] dhcp4 (eth0): request timed out Mar 31 14:04:05 nanopifire3 NetworkManager[3061]: <info> …

I was trying to plug my Arduino uno into my Udoo quad but it does not appear to be assigned to a serial port, which i believe should appear as ttyACM*. when searching the kernel github page i see these relults https://github.com/patrykk/linux-udoo/search?utf8=%E2%9C%93&q=ACM. Is it possible to get these devices supported in your next kernel release?

Hi, I have an issue on my hummingboard i2ex. I installed mpd and configured it with SPDIF. The kernel is 4.9.12-cubox. Unfortunately the sound looks strange. It sounds like a slow motion recording. The load is very load (<0.2) so I think it is not a performance problem. I saw there was an issue with the SPDIF previously but it is a little bit different. Do you have any idea what could be wrong? Is it possible to test it your side? Thanks, Warter

I am using your Debian (wheezy) on a SolidRun Hummingboard-i2eX. uname -a Linux cubox-i 3.14.14-cubox-i #2 SMP Mon Aug 31 19:36:11 CDT 2015 armv7l GNU/Linux In /dev, it looks like there are two IMX serial devices: ls -l /dev/ttymxc* crw-rw---T 1 root dialout 207, 16 Feb 4 2001 /dev/ttymxc0 crw-rw---T 1 root dialout 207, 19 Feb 4 2001 /dev/ttymxc3 I can send/receive data from /dev/ttymxc0 (uart1) by using pin 8 (Tx) and pin 10 (Rx) of the 26-pin header on the board. But how can I access /dev/ttymxc3 (uart4)? Is there a pin somewhere on the board that I can connect to so I that I can send serial input to uart4? Thank you.

Hello, I had three power outages in quick succession, I think the second or third one caught the cubox while rebooting. It won't start anymore. I attached pictures of what I see when plugging it into a TV for catching it's messages. How can I unbrick my system without losing all my work on the SD card? I saw how-to-unbrick-the-system, but I'm not sure where to download which files, since I'm not sure if I have NEXT, mainline or legacy installed. Does that even matter at this point?

Hello, I deployed the latest image "Armbian Buster mainline based kernel 5.8.y" and after initial setup, I cannot activate the analog sound card. What I did: The "Hardware" section in "Settings" section of armbian-config was missing, so I installed the following packages: "linux-dtb-current-sunxi/buster 20.11.0-trunk.28 armhf Linux DTB, version 5.9.5-sunxi, linux-dtb-dev-sunxi/buster 20.11.0-trunk.28 armhf Linux DTB, version 5.10.0-rc2-sunxi" and after that changed: /boot/armbianEnv.txt by adding overlay_prefix: "sun8i-h3". This was the only way I could make armbian-config to correctly display the "Hardware" device tree. I tried to put: i…

I've got a CuBox i4P with an external SSD connected via eSata and has an external power supply. The 960GB SSD isn't recognised on the system: df -aTh Filesystem Type Size Used Avail Use% Mounted on sysfs sysfs 0 0 0 - /sys proc proc 0 0 0 - /proc udev devtmpfs 869M 0 869M 0% /dev devpts devpts 0 0 0 - /dev/pts tmpfs tmpfs 202M 8.1M 194M 5% /run /dev/mmcblk1p1 ext4 15G 1.2G 14G 8% / securityfs securityfs 0 0 0 - /sys/kernel/security selinuxfs selinuxfs 0 0 0 - /sys/fs/seli…

Hello Armbian team, I am working with the TQ mba8mpxl-ras314 (i.MX8MP) board and trying to use an LVDS display: AUO G150XAN02.0 (1024×768). I have built Armbian from source using: ./compile.sh build \ BOARD=mba8mpxl-ras314 \ BRANCH=current \ RELEASE=jammy \ BUILD_DESKTOP=yes \ BUILD_MINIMAL=no \ DESKTOP_ENVIRONMENT=xfce \ DESKTOP_ENVIRONMENT_CONFIG_NAME=config_base \ KERNEL_CONFIGURE=no I created a custom LVDS DTS overlay with the correct timing from the display datasheet (65 MHz pixel clock, 1024×768, proper porch and sync settings), and added it to However, after booting the image, the LVDS output still sta…

A couple years back a company named TBS, mostly known for their DTV hardware, released a mini PC styled thing. It's called the TBS2910 Matrix and was marketed mostly as a Kodi box. Sadly it doesn't seem the product made the sales necessary to keep the company interested - which in my view is a shame since it's got some interesting hardware features: Quad-core i.MX6 CPU (1GHz) 2GB DDR3 Ram MiniPCIe slot 16GB eMMC Storage SATA connector with 12V power, capable of powering a 3.5" HDD On-board 2.4GHz Wifi Gigabit ethernet (likely limited to 400Mbps or so) 3 USB 2.0 ports + 1 mini USB otg port 1 full-size SD slot, 1 microSD slot HDMI, analog and optical audio out I…

Hi guys. I can't get the headphone jack to work on the NanoPC T3+ on Armbian 5.44 Bionic. HDMI sound works. There's a second Built-in Audio, but nothing seems to work. Also the on-board microphone doesn't work. I've tested it on the friendlyArm Lubuntu and there it both works. Additional. Can somebody point me into the right direction where to add a higher cpufreq in available frequencies? At 1400Mhz it only reaches 55°C maxed(with fan). Single core performance is bad. So some overclock would be helpful. Otherwise Armbian works great. Thank you. NicoD

Hi everyone, Armbian works well for me on a NanoPi Neo, and installing it on my Cubox i4 was straightforward... but I'd like to try a kernel newer than linux-image-cubox (version 4.14), to get improved video support, and both linux-image-dev-cubox (version 5.2.11) and linux-image-next-cubox (version 5.1.16) do not provide any video output at all. I've uploaded the armbianmonitor report from booting the linux-image-dev-cubox kernel. Help on this would be appreciated!

Hi, I have used ARMBIAN Debian GNU/Linux 8 (jessie) 3.14.79-cubox the upload speed was horrible about 2,5 Mbytes/s Now I switched the kernel to vanilla ARMBIAN Debian GNU/Linux 8 (jessie) 4.8.4-cubox the upload speed is now about 8,5 Mbytes/s On booth kernels the download speed is ok about 48 Mbytes/s root@tombase:~# ifconfig eth0 eth0 Link encap:Ethernet Hardware Adresse d0:63:b4:00:c4:04 inet Adresse:192.168.15.7 Bcast:192.168.15.255 Maske:255.255.255.0 inet6-Adresse: fe80::d263:b4ff:fe00:c404/64 Gültigkeitsbereich:Verbindung inet6-Adresse: 2003:84:ab4c:ac00:d263:b4ff:fe00:c404/64 Gültigkeitsbereich:Global …

Hi, I had downloaded the image for my Hummingboard i2ex & tried to move my root FS to a USB drive. It did not throw any errors, but, on verifying the mount & boot.cmd file, it did not get migrated. The root still shows mounted from the SD Card. Can anyone help me in resolving this issue ? Here is my device details after reboot. root@cubox-i:~# lsblk NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT sda 8:0 1 14.6G 0 disk └─sda1 8:1 1 14.6G 0 part mmcblk0 179:0 0 14.9G 0 disk └─mmcblk0p1 179:1 0 14.6G 0 part / root@cubox-i:~# blkid /dev/mmcblk0p1: UUID="77646057-ce1f-426f-b09b-d2e6f03f3d52" TYPE="ext4" PAR…

I've loaded Armbian onto my Udoo Dual and am having issues getting it past starting the kernel. I really like this OS on my other sbc's and have had no issues before this. I'm mostly a Linux noob with an elementary grasp of compiling the kernel. I have had this problem for about a week and am finally asking the pro's on how to fix this. Any help would GREATLY appreciated. Below is what I get from the U-Boot startup. Thanks! U-Boot SPL 2015.10-armbian (Jun 13 2017 - 15:51:16) U-Boot 2015.10-armbian (Jun 13 2017 - 15:51:16 +0200) CPU: Freescale i.MX6DL rev1.1 at 792 MHz Reset cause: POR Board: UDOO DualLite DRAM: 1 GiB MMC: FSL_SDHC: 0 *** Warning - bad CRC,…

I cloned the quite latest version of Armbian: commit 369e69a55390f59c2299c98c09bf3d805ac59335 (HEAD -> main, origin/main, origin/HEAD) Author: Ricardo Pardini <ricardo@pardini.net> Date: Mon Apr 3 13:15:54 2023 +0200 artifact-armbian-bsp-cli: hash more variables included in `/etc/armbian-release` Using the edge branch to compile for my renegade board, which has the rk3328 chip: ./compile.sh BOARD=renegade BRANCH=edge RELEASE=bullseye BUILD_MINIMAL=no BUILD_DESKTOP=no KERNEL_CONFIGURE=no COMPRESS_OUTPUTIMAGE=sha,img It blocks when start to boot the kernel: U-Boot 2022.07-armbian (Apr 17 2023 - 23:29:15 +0800) Model: Firefly roc-rk332…

Hi, I run ARMBIAN 5.25 stable Debian GNU/Linux 8 (jessie) 4.9.12-cubox and use an external DAC connected to USB. Additionally and or comparison purposes I use ARMBIAN 5.25 stable Debian GNU/Linux 8 (jessie) 4.4.51-udoo . Since a few days the kernel on the cubox doesn't seem to recognize the USB-DACs as sound device any more. So, "aplay -l" doesn't list it: aplay -l **** List of PLAYBACK Hardware Devices **** card 0: SPDIF [Integrated SPDIF], device 0: S/PDIF PCM snd-soc-dummy-dai-0 [] Subdevices: 1/1 Subdevice #0: subdevice #0 A test with a udoo-board, shows the expected output: aplay -l **** List of PLAYBACK Hardware D…

Please help. We bought a board on AliExpress, but no one provided any documentation. And I can't ask the seller for it. Can anyone share any information? It's very difficult to figure out which pin goes where without documentation on the circuit diagrams. But given my situation, I set up two Ethernet interfaces. I haven't tested them at full capacity, but I can ping from both networks... myd lt527m 16e2d 180 e sx Thanks a lot.

Hi all, After years of running Armbian on my Cubox i4 without problems, I am suddenly in a situation that I don't understand. For some reason, I decided to reboot it, and now it doesn't work anymore. Using a micro-USB cable and my Macbook, I connected to the serial line to grab some logging: U-Boot SPL 2017.11-armbian (Jan 24 2018 - 22:39:16) Trying to boot from MMC1 U-Boot 2017.11-armbian (Jan 24 2018 - 22:39:16 +0100) CPU: Freescale i.MX6Q rev1.5 996 MHz (running at 792 MHz) CPU: Extended Commercial temperature grade (-20C to 105C) at 41C Reset cause: POR Board: MX6 Cubox-i DRAM: 2 GiB MMC: FSL_SDHC: 0 *** Warning - bad CRC, using def…

Hello could someone point me in the direction of the stretch images if they are still hosted here of course. I want to run omv and i just found out what is happening with omv5 and armbian the past year. So ill go stretch and omv4. Kind regards Oliver

Hi, I have Connected i.MX6 Single Board Computer. https://dl.dropboxusercontent.com/u/6943408/ConnectCore/DSCF0496.JPG I need to boot Debian-based system from SD card. I tried a lot of images - without success. Only original Yocto image from Digi.com company boot: ftp://ftp1.digi.com/support/digiembeddedyocto/2.0/r3/images/82003940_C/ccimx6sbc/x11/dey-image-qt-x11-ccimx6sbc-20160811150718.rootfs.sdcard http://www.digi.com/resources/documentation/Digidocs/90001945-13/task/yocto/t_faq_boot_from_usd_yocto.htm but I need Debian-based OS, not Yocto. From dozens of image for other board I have "success" only with http://www.armbian.com/donate/?f=Armbian_5.20…

Hello everyone, just wanted to let you know, upgrade from Armbian Ubuntu 5.38 to 5.44 caused problems on my Cubox-i4Pro. - Armbian Ubuntu 5.38 headless (no display connected to Cubox-i) worked perfectly, there were no issues with anything. - Upgraded Armbian Ubuntu 5.38 to 5.44 (apt-get) and rebooted - After reboot, no audio was sent to my audio amplifier (through Toslink optical cable) by Shairport-Sync 3.1.7 (AirPlay emulator). Airplay was visible on my iOS devices (iPad, iPhone) and audio was streamed from iOS to AirPlay, but no audio was sent by Cubox-i to the optical connection to my audio amplifier. - Removed the Shairport package usi…

UDOO Quad Hello. Armbian bionic desktop mainline based kernel 5.4, USB ports do not work, wifi module is not visible. Everything works correctly on Stretch. Do not tell me where to look for the reason?

Here's what I get when trying to boot (data is from my serial adapter): I2C_WriteByte nack returned I2C Device Address Write Abitration Error I2C_WriteByte nack returned I2C Device Address Write Abitration Error I2C_WriteByte nack returned I2C Device Address Write Abitration Error I2C_WriteByte nack returned I2C Device Address Write Abitration Error Wakeup Sub CPU 1234567 CPU Wakeup done! WFI is expected. CPU0 is Master! U-Boot 2016.01-armbian (Sep 02 2019 - 08:57:37 +0200) DRAM: 1 GiB MMC: NEXELL DWMMC: 0, NEXELL DWMMC: 1 loaded from SD, getting env from MMC 1 *** Warning - bad CRC, using default environment MIPI: display.0 HDMI: display.0, preset 0 (1280 * 72…

Any hints?

Hi, My Solidrun Cubox I1-300-D has been running Armbian for quite some time (Samsung EVO SD card). However, I tried to update/upgrade, and my version was non-supported anymore (19.04?), so time for a fresh new image. I've tried three times (download image from https://www.armbian.com/cubox-i/, sha256 check, burn image with etcher, inspect file structure (looks good), and boot), but each time this happens: "Armbian universal operating system" + text ("Executing script at ...") splash screen, then a black screen, and then my TV says "no signal", and then nothing anymore. At the ethernetconnector, there is red LED on / flashing…

I am trying to set up Armbian as an iSCSI initiator using open-iscsi. The result is Mar 15 03:07:13 matrix iscsid[2207]: iSCSI logger with pid=2208 started! Mar 15 03:07:13 matrix systemd[1]: iscsid.service: Failed to parse PID from file /run/iscsid.pid: Invalid argument Mar 15 03:07:13 matrix iscsid[2208]: iSCSI daemon with pid=2209 started! Mar 15 03:07:13 matrix iscsid[2208]: can not create NETLINK_ISCSI socket Mar 15 03:08:43 matrix systemd[1]: iscsid.service: Start operation timed out. Terminating. Mar 15 03:08:43 matrix systemd[1]: iscsid.service: Failed with result 'timeout'. with a timeout of around 90 seconds. I'm running the kernel Li…

Hello Igor, thanks for your work. On your Github-page for Kernel 4.2.0 you say you tested this kernel with chromium egl. Which was your setup? (Did you build your own chromium? which distro did you use?.....) regards Florian

Hi everyone. I am using Debian Jessie image for hummingboard IMX6. I compiled version 0.12.0 of https://github.com/Freescale/gstreamer-imxand installed it. I can use imxipuvideosink just fine. However, I can't get imxg2dvideosink working. When I try the following pipeline: gst-launch-1.0 videotestsrc ! imxg2dvideosink I get $ sudo gst-launch-1.0 videotestsrc ! imxg2dvideosink Setting pipeline to PAUSED ... Pipeline is PREROLLING ... Message from syslogd@localhost at Jun 1 15:40:46 ... kernel:[ 1815.922228] Internal error: Oops: 5 [#4] SMP ARM Message from syslogd@localhost at Jun 1 15:40:46 ... kernel:[ 1815.922381] Process videotestsrc0:s (pid: 2506, stack limit = 0…

Hi, I'm trying to generate an Armbian image for a custom board. I generated configuration files for card and family, with the necessary information for u-boot and kernel. I need to have separate boot partition in FAT and I added BOOTFS_TYPE="fat". Using the compile.sh in the Armbian "build" repo I get an image, but flashing it on the sdcard does not start uboot. In the boot partition I find not only the kernel and dtb, but also the u-boot scripts. How do you generate an image that contains everything correctly? Thanks in advance Riccardo

Hello, I am using clean 2.9 jessie build on Cubox-i. I am planning to move from 1*bare sata HDD boot to 2*sata HDDs with lvm mirroring. Somebody had tried to boot from lvm on such devices? Is it works out-of-box or need some tweak? Thanks, Yuri.

Hi, I just tried last Debian iso from solidrun where bluetooth is working. It is the only issue I have with my Cubox-i 4x4 working with debian from armbian. But there is always a but..... I can't copy the system to the hard drive and make it work after reboot, only works from sd card. So my point is How can I use the benefits of armbian (it's tools) on another iso where drivers look work fine? thanks.

I have a Cubox that has been running Debian Wheezy for a while and I want to do a clean install of Jessie on it. I downloaded Armbian_5.00_Cubox-i_Debian_jessie_4.4.1 and wrote it to SD card, but it won't boot. The error is: Unknown command 'bootz' I rather suspect that my Cubox is not a Cubox-i - possibly an earlier version that does not support compressed kernels. Is there some way I can work around this? Maybe re-flash the bootloader, or uncompress the kernel on another system perhaps? Thanks Andrew

Hi Igor, my Cubox-i4Pro worked perfectly fine with your Armbian Debian Jessie, until I upgraded from 4.7 to 4.81. After the upgrade was performed today, the system time is always wrong after boot, it is always set to Jan 1 01:00:00 1970. Setting the system time correctly does not help, after reboot it is wrong again. I didn't observe this behavior before upgrade, the system time just used to work without any attention needed. Nothing else was changed in the system, only the upgrade of Armbian was done to ver 4.81. So I'm wondering what went wrong with the upgrade. Hardware time is always correct, syncing system time to hardware time does not survive boot. I tried …

Hello. I've tried to find the TC358743 toshiba chip drivers in the kernel, but I can't. As far as I know they are included from 4.1 version, but in the menuconfig option I didn't found them. Is driver avaliable on this kernel or I should use another kernel?

Hi, i am trying start Kodi on CuBox i4Pro but without success for now. - I installed armbian debian jessie on SD. - booted & rebooted - add into sources.list deb http://httpredir.debian.org/debian/jessie-backports main contrib non-free deb-src http://httpredir.debian.org/debian/jessie-backports main contrib non-free - apt-get update - apt-get upgrade - reboot - apt-get install kodi and laund kodi and crash with error ERROR: Unable to create GUI. Exiting Segmentation fault Crash report available at /root/kodi_crashlog-20151229_181607.log What now? Thanks for any hint.

hi, i have following problem: ● brcm4330-patch.service - LSB: Patch firmware for brcm4330 Bluetooth adapter Loaded: loaded (/etc/init.d/brcm4330-patch; bad; vendor preset: enabled) Active: failed (Result: exit-code) since Wed 2018-04-11 09:25:00 UTC; 19min ago Docs: man:systemd-sysv-generator(8) Process: 454 ExecStart=/etc/init.d/brcm4330-patch start (code=exited, status=1/FAILURE) Apr 11 09:24:54 wokati systemd[1]: Starting LSB: Patch firmware for brcm4330 Bluetooth adapter... Apr 11 09:24:55 wokati brcm4330-patch[454]: * Start pushing BRCM4330 bluetooth firmware to device and waiting 5 sec to complete... Apr 11 09:25:00 wo…

Hi, I'm trying to build the next kernel (4.14.y) for Cubox-i, but the process fails here: DTC arch/arm/boot/dts/imx6dl-cubox-i.dtb Error: arch/arm/boot/dts/imx6qdl-cubox-i.dtsi:261.1-9 Label or path vcc_3v3 not found FATAL ERROR: Syntax error parsing input tree scripts/Makefile.lib:317: recipe for target 'arch/arm/boot/dts/imx6dl-cubox-i.dtb' failed make[1]: *** [arch/arm/boot/dts/imx6dl-cubox-i.dtb] Error 1 arch/arm/Makefile:348: recipe for target 'dtbs' failed make: *** [dtbs] Error 2 make: *** Waiting for unfinished jobs.... When I compiled the kernel approx. 2 months ago (4.15.?) I did not get that error. Any ideas?

I just ran apt-get update && apt-get upgrade, sure enough, a new kernel was downloaded. Due to a non-standard wifi chip, I always run KMS before rebooting, giving the new kernel version as an argument. (The automatic install on reboot didn't work so well in the past) It seems now that something is not right with the new kernel headers. I have not rebooted yet, out of fear the system might be unstable then. Log: http://ix.io/1djM Compiling scripts: /usr/src/linux-headers-4.16.8-cubox# make -s scripts scripts/selinux/genheaders/genheaders.c:19:22: fatal error: classmap.h: No such file or directory #include "classmap.h" …

Hi, If you think that Solid-run Cubox-i kernel branch is becoming outdated, you can use a mainline linux kernel with the following enablement patches: Russell King home dir: http://www.home.arm.linux.org.uk/~rmk/cubox/?C=M;O=D Grab the most recent hummingboard-cubox-i DIFF big patch and patch it into your vanilla 4.1 kernel source dir. Then use a default config appropiate for a Cubox-i / Hummingboard: # make imx_v6_v7_defconfig hope it helps

got this message during build (during installation of additional packages: bridge-utils): [ error ] Installation failed initctl: Unable to connect to Upstart: Failed to connect to socket /com/ubuntu/upstart: Connection refused invoke-rc.d: unknown initscript, /etc/init.d/systemd-logind not found. dpkg: error processing package libpam-systemd:armhf (--configure): subprocess installed post-installation script returned error exit status 100 Processing triggers for libc-bin (2.19-0ubuntu6) ... Processing triggers for sgml-base (1.26+nmu4ubuntu1) ... Processing triggers for ureadahead (0.100.0-16) ... Errors were encountered while processing: libpam-systemd:armhf E: Sub-…

Hello, i was using my cubox-i 4 pro since two years now. Last time (last week) i have used a armbian legacy debian version from whatever, after my hdd corrupted (i have a backup) i tried to setup the system again with a new ssd and the newer version of armbian but i have a few problems. First i flashed the mainline 4.9.7 dd-image on my sd card with rufus. That one is not booting. I can see in a seriel session that the uboot is starting after the line booting the kernel nothing happens any more. In my router i can not see any ip from dhcp is given out to the system and it does not do anything more. After that i have tried the legacy 3.14.79 what when i flashed …

Hello, all, I am trying to confirm the actual status of UART support on the Banana Pi BPI-R4. Does the hardware UART work reliably and appear as a character device (e.g., /dev/uart*) under Armbian Linux? Also, what is the maximum baud rate supported by this port? And one more question: Does Armbian support the Quectel EP06 modem (LTE, mini PCIe)? Thank you in advance, SY, Serge

Hi, I'm incurring in a issue with updates of the board to Armbian 26.8. The new kernel or updates break the board connectivity gets lost, since the board boots up, the LAN port blinks but it doesn't set any IP Address. The board works in headless mode with the Debian 13 CLI UFS image, so I can't debug it using a monitor. Has anyone the same issue? How to reproduce 1.Flash the recommended Debian 13 Trixie CLI Image from Armbian Website 2.Start the board normally, in headless mode 3.login with ssh 4.set a new user account 5.Run apt update && apt dist-upgrade -y and then reboot 6.Board…

I have debian installed on my hummingboard pro. When I execute nand-sata-install script it looks like it works. It asks me to reboot but then issuing a df -h or mount does not show that I have a 32gb drive mounted on /. Is there something else I have to do after I run this script? Thanks! ril3y

Hi, how can I edit the ssh welcome message in my cubox? Thanks.

I finally got my Udoo Dual up and running with Mainline 4.4 Xenial Next and I was wondering how I go about getting the arduino environment back on to it. I downloaded the arm version from arduino and it sees the correct serial port but how do I access it within arduino. I updated the board package to include the Udoo boards but when I hit upload, it says bossac tools are unavailable for my board? What do I need to do to fix this? Sent from my iPad using Tapatalk

Hi every one, Im new on this form and this is my first time, when Im working with HummingBoard. On my HummingBoard is connected a little board with HDMI input and is connected with DVD Player. One another HDMI, which is on HummingBoard, is connected with Monitor, where I can see my console. So, my question is, how can I install, that my little board will become a video from DVD Player and streaming it to the HummingBoard, so, that I can see this video on my Monitor. Im using the Debian wheezy image Sorry for my english, hope for fast help

I upgrade Jessie to Stretch and installed (from armbian stretch) linux-image-dev-udoo linux-headers-dev-udoo linux-dtb-dev-udoo linux-u-boot-udoo-dev Unfortunately the kernel is not booting any more from sata: U-Boot SPL 2015.10-armbian (Nov 22 2017 - 17:21:35) U-Boot 2015.10-armbian (Nov 22 2017 - 17:21:35 +0100) CPU: Freescale i.MX6Q rev1.2 at 792 MHz Reset cause: POR Board: UDOO Quad DRAM: 1 GiB MMC: FSL_SDHC: 0 No panel detected: default to HDMI Display: HDMI (1280x720) In: serial Out: serial Err: serial Net: using phy at 6 FEC [PRIME] Hit any key to stop autoboot: 0 ** Bad device size - sata 0 ** AHCI 0001…

Hi, Beside some limitations with cubox's hardware I love my cubox-i 4x4. But it is hard to find good documentation about how to many things. Reading this forum and other webs I made many of my goals. After installing Debian from this web site and using the nand-sata-install script the system works from the hard drive. This hard drive has two partitions, the main and big one and one small, 4GB, swap partition, but the system is not using it, so I would like to know if I can make the system use it. I found this how to: 9. Setting Up Swap Space 9.1. Swap Files Normally, there are only two steps to setting up swap space, creating the partition and adding it to /etc/…

Hey all, I have been fighting this for 2 days now thought I would reach out for some help. I have a Intel Wireless 7260 PCIe in my Hummingboard Pro board. I can run iwlist wlan0 scanning and see my wifi access point no problem. However when I run dhcpclient wlan0 I never can connect to my access point. This is my /etc/network/interfaces file. # Wireless adapter #1 auto wlan0 allow-hotplug wlan0 iface wlan0 inet dhcp wpa-ssid "myssid" wpa-psk "mypassword" auto lo iface lo inet loopback I have also tried a USB wifi adapter to attempt to rule out the PCIe bus being the issue. However neither will connect. If anyone knows what to do from here I would be e…

Dear Armbian Team, I have a BPI M64. all the images for BPI m64 have "Audio Codec" except the armbian image. so i cannot configure my 3.5 audio jack because it needs "Audio Codec" card in alsamixer. i cannot hear any sound from the jack because it needs to be configured with alsamixer over the "Audio Codec" card. there is only sun50i-a64-audio and sun9i-hmdi. but no "Audio Codec". can you give me any solution?

Hi there, I see `iw list` is showing that the i4 pro's internal chip supports AP mode. [1] However, when I try to run `/usr/sbin/hostapd /etc/hostapd.conf` it errors out with no driver entry or driver=nl80211 in hostapd.conf [2] Configuration file: /etc/hostapd.conf Failed to create interface mon.wlan0: -95 (Operation not supported) wlan0: interface state UNINITIALIZED->COUNTRY_UPDATE wlan0: Could not connect to kernel driver Using interface wlan0 with hwaddr 40:2c:f4:ae:16:c6 and ssid "aa" Failed to set beacon parameters wlan0: Could not connect to kernel driver Interface initialization failed wlan0: interface state COUNTRY_UPDATE->DISABLED w…

Hello, I have a problem with connecting to ILI9341 hummingboard postaebuje as described http://docs.armbian.com/Hardware_Freescale-imx6/ I do entry Add this to your / etc / modules: fbtft_device name = adafruit22a rotate speed = 90 = 48000000 fps = 50 GPIOs reset = 67, led 72, dc 195 busnum = 1 reboot but the display is lit only shows nothing What may be the problem wyśietlacz exactly http://allegro.pl/wyswietlacz-lcd-tft-2-4-240x320-spi-bte-141-i6258585811.html

Hi! For some reason my nanopi fire 3's gigabit ethernet is very unstable. When connected to my local machine directly, the ping latency is insanely high and irregular: PING 10.42.0.101 (10.42.0.101) 56(84) bytes of data. 64 bytes from 10.42.0.101: icmp_seq=1 ttl=64 time=112 ms 64 bytes from 10.42.0.101: icmp_seq=2 ttl=64 time=333 ms 64 bytes from 10.42.0.101: icmp_seq=3 ttl=64 time=350 ms 64 bytes from 10.42.0.101: icmp_seq=4 ttl=64 time=203 ms 64 bytes from 10.42.0.101: icmp_seq=5 ttl=64 time=1014 ms 64 bytes from 10.42.0.101: icmp_seq=6 ttl=64 time=423 ms 64 bytes from 10.42.0.101: icmp_seq=7 ttl=64 time=93.4 ms 64 bytes from 10.42.0.101: icmp_seq=8 ttl=64 time…

Hey All, First, a big thank you to Igor and all who work hard to get armbian out to the masses Second, setting NODM_ENABLED=false NODM_USER=some_user in /etc/default/nodm as per the instructions here: http://www.armbian.com/documentation/ - section 'How to login?' doesn't seem to work for me on my cubox i4pro. I turns out that /etc/default/nodm gets overwritten with the default root values on each boot. This causes lightDM to misbehave and bugger up the Xserver. I see Xcursor drawing artefacts and the LightDM UI widgets poke through into the root autologin desktop. Even without lightDM installed and /etc/default/nodm set as follows: …

Hello. I have been running Armbian_5.41_Cubox-i_Ubuntu_xenial_next_4.15.7_desktop.img with no issues on my Hummingboard Edge which consists of rev 1.4 Hummingboard2 carrier and rev 1.5 SOM. I decided to try the legacy image (Armbian_5.41_Cubox-i_Ubuntu_xenial_default_3.14.79_desktop.img) to gain support for the hardware video decoder. However, I have been unable to get the legacy version to boot properly. Initially, the board is detected as having a rev 1.5 SOM and there is a message about not being able to find the right dtb file (imx6q-hummingboard2-som-v15.dtb). Looking under /boot/dtb there are no dtb files for the rev 1.5 SOM in the legacy image. So I copied the defa…

Upgrading cubox-i Armbian Buster from kernel 5.7.x to Kernel 5.8.y breaks ethernet and I'm unable to get it connected again. Works fine again downgrading back to 5.7.y. This occurs on multiple cubox-i devices. System diagnosis information will now be uploaded to http://ix.io/2zH6 dmesg | grep eth0 [ 4.667327] fec 2188000.ethernet eth0: registered PHC device 0 [ 22.369472] fec 2188000.ethernet eth0: Unable to connect to phy nlcli wlan0: connected to sketch-wlan "Broadcom BCM4330" wifi (brcmfmac), 6C:AD:F8:1D:36:25, hw, mtu 1500 ip4 default inet4 10.1.0.41/22 route4 0.0.0.0/0 …

When I take an image with the camera ( Camera V2 raspberry) with the pygame or cv2 module, I get a green screen. I looked for several documentations to solve this problem but never anything very specific. Do you have any idea?

Greetings to all; For a few hours now, as of today 2025-05-29 1418 North America/Pacific, I have been unable to update apt, receiving the following two error messages: E: Failed to fetch http://beta.armbian.com/dists/bookworm/Contents-armhf File has unexpected size (2085376 != 51213). Mirror sync in progress? [IP: 23.186.113.5 80] E: Failed to fetch http://beta.armbian.com/dists/bookworm/Contents-all File has unexpected size (44878 != 8029). Mirror sync in progress? [IP: 23.186.113.5 80] I suppose it is possible that the "mirror sync" mentioned is taking a very long time, but this seems unlikely to me. Does anyone have any ideas…

Using Armbian_4.4_Udoo_Debian_jessie_3.14.28 - Wicd doesn't detect any networks (/etc/network/interfaces has wlan0 commented out). If i setup /etc/network/interfaces and edit /etc/hostapd.conf and /etc/init.d/hostapd, I can get the udoo to authenticate to my wireless network, but I can't ping/resolve/browse anything but google.com Using CLI images - I can't get my network card to auth at all. Any idea what happened - a few months ago wifi was working perfectly. Also - is there anyway to modify the startup job to raise network interfaces to have a time limit? Occasionally boot will go indefinitely.

Hi I have no /dev/dvb on my UDOO Quad. I'm trying to get MythTV or tvheadend working on my UDOO Quad with Armbian Jessie with kernal 4.4.102 glen@udoo:~$ uname -a Linux udoo 4.4.102-udoo #2 SMP Fri Nov 24 18:49:01 CET 2017 armv7l GNU/Linux I thought that dvb drivers were included in version 3.19 of the kernel and up? Anyway I copied dvb-usb-af9015.fw to /lib/firmware and rebooted. But nothing shows up under /dev/dvb/ I would expect there to be adapter0 and adapter1 Here is my lsusb: glen@udoo:~$ lsusb Bus 001 Device 004: ID 13d3:3226 IMC Networks DigitalNow TinyTwin DVB-T R…

Hi there, on my Cubox i4 pro there was an update from 4.9.7-cubox to 4.9.12-cubox. It took quite a while, and there were a couple of messages: dpkg: warning: unable to delete old directory '/usr/src/linux-headers-4.9.7-cubox/scripts/genksyms': Directory not empty dpkg: warning: unable to delete old directory '/usr/src/linux-headers-4.9.7-cubox/scripts/mod': Directory not empty dpkg: warning: unable to delete old directory '/usr/src/linux-headers-4.9.7-cubox/scripts/kconfig': Directory not empty dpkg: warning: unable to delete old directory '/usr/src/linux-headers-4.9.7-cubox/scripts/basic': Directory not empty dpkg: warning: unable to delete old directory '/usr/src/…

Hello all, I've downloaded the Vanilla Jessie (Armbian_5.00_Cubox-i_Debian_jessie_4.4.1.zip) and installed it on my 2 Cubox-i (i4Pro and i4x4). I'd like to get Wi-fi working on both and edited the /etc/network/interfaces file to uncomment and configure wlan0 and rebooted. Unfortunately on both, I'm unable to get Wi-Fi operational. Performing an ifup wlan0 generates the following output: wpa_supplicant: /sbin/wpa_supplicant daemon failed to start run-parts: /etc/network/if-pre-up.d/wpasupplicant exited with return code 1 Failed to bring up wlan0. Any guidance would be greatly appreciated. Thanks in advance UPDATE: WiFi is now working on both 4x4 …

Hi Sir/Madam, I am using Humming bard Gate for testing, i am trying to interface a minipcie of 4G module L718 from Fibocom. I am using Armbain platforn for testing. i am unable to interface the Module and use the module to access internet(Use as mobile broadband). Kindly support

Hi There ! Finally managed to Get the Cubox up& running well . Upgraded from Wheezy to Jessie . Still Stock 3.14.14 Kernel. Well, next step: The graphics card/hardware acceleration. Is there a quite straight "Do this,get that, then do that" howto to get it working ? Thanks so far! ###edit### Things are geting quite weirder today. Did a further SD-Card with Cubox-i_Debian_2.6_wheezy_3.14.14 to get GPU-Suppport by the Wheezy releases . corrected sources: deb http://repo.maltegrosse.de/BSP:/Cubox-i/Debian_Wheezy/ ./ deb-src http://repo.maltegrosse.de/BSP:/Cubox-i/Debian_Wheezy/ ./ apt-get update / upgrade Did apt-get install…

I installed "Armbian_5.25_Cubox-i_Ubuntu_xenial_default_3.14.79_desktop" because I am having many other troubles with "Armbian_5.25_Cubox-i_Ubuntu_xenial_next_4.9.7_desktop". Everything looks working fine until I noticed I can't use firefox over a RDP, in any user session. Also I would like to comment I can't make work chromium, getting all time a white page with a "Aw, Snap" message. Any idea about how to fix these two problems?

Maybe someone has an idea what the problem is... So I use the latest armbian with kernel 4.9.18. I installed mpd+mpc on it and mounted nfs share with fstab. Everything is working fine but if i press the play button from my phone/tablet actually the playing starts just after 30 sec. it is exactly 30 sec. I have no idea what can cause this delay.

In the nanopcT3+ board I need to enable the I2S1 (14 pin header) in Desktop version. I need to have the I2S1 peripheal as SLAVE and a MCLK of 48kHz and 192kHz (better if other clock speed are supported). The "aplay -l" and "arecord -l" commands must show the I2S1 as a sound card with input ad output device. I've tried to do the job but I'm a newbbie on linux and embedded linux. Following the official FriendlyArm wiki, on a host PC I've downloaded the kernel source, modified the dtsi file to enable i2s, recompiled the kernel and U-boot and all steps seem work fine. Now I don't know how to do a final steps to have a SD bootable image with eflasher to load and test…

Hi, I've just created a SD-card with Armbian Bionic (mainline kernel 4.19.y) for a Hummingboard Gate. I noticed during boot that it says it uses U-boot version 2013.10-rc4. This seems quite old compared to the 2018 version that was on the Debian Stretch image from SolidRun. I've tried to search the internet to see what the impact of something like this is and wasn't able to find something that made sense to me (could be entirely my fault). I therefore have the question: Is the U-boot version intentional? (maybe it has some features that newer versions have dropped.)

Hi Igor ! We have a problem with i.mx6 when ambiant temperature is too high or when CPU is too busy. The CPU frequency don't scaling with the temperature CPU, so the System Crash. Can you had thermal sensor on Cpu scaling ? by add it on kernel ? Thanks

Hi, I just installed last ubuntu, iso 5.38, and the system says I only have 2GB RAM instead of 4GB. How can I fix it? Also, in the armbian-config, I can select board configuration, but I don't know what I should choose... Cubox-i dual/quad...... v1.5...... with emmc.... ?? Thank you.

Hi there, is there a chance to have hardware acceleration for the armbian images for stretch? I build the debian stretch default desktop version, but there is no xserver-xorg-video-imx-viv and thus the desktop feels really laggy. Regards Georg

I've tried two releases of Armbian for the Jetson Nano and was struggling to get SPI enabled on the Jetson. To check if SPI is enabled, I've been reading its status is through: cat /proc/device-tree/spi@7000d400/status which just returns disabled Here's what I tried: - enabling spi-spidev through armbian-config, but this option doesn't exist in armbian-config as it does for other releases for devices - making a custom device tree dts file and pointing extlinux.conf to it (below is the relevant snippet): spi@7000d400 { compatible = "nvidia,tegra210-spi\0nvidia,tegra114-spi"; reg = <0x00 0x7000d400 0x00 0x200>; inte…

Hi. i've compiled udoo quad image using armbian build framework. The kernel is 6.x.x. When i boot the image on sdcard, usb ports don't start: the mouse's led don't turn on and keyboard too. What can i do to solve this problem? what paramaters do i have to enable? thanks

I migrated my system from Wheezy from udoo.org which installed long ago to Armbian Jessie. The main stuff is working and i also manged to boot the new kernel (u-boot config). When i do apt-get upgrade the system always want to upgrade the initrd file. I get the following error messages: update-initramfs: Generating /boot/initrd.img-4.4.51-udoo Warning: root device rootfs does not exist Press Ctrl-C to abort build, or Enter to continue Warning: /sbin/fsck.rootfs doesn't exist, can't install to initramfs, ignoring. update-initramfs: Converting to u-boot format Unsupported platform. run-parts: /etc/initramfs/post-update.d//flash-kernel exited with return code…

Hello Solidrun has updatet their microsoms to v1.5. MicroSOM rev 1.5 Wifi: 802.1 b/g/n - 2.4 / 5 Ghz, single or dual MIMO with Bluetooth V4.0 (TI Wilink 8 WL18xx) http://wiki.solid-run.com/lib/exe/fetch.php?media=imx6:microsom:docs:sr-usom-mx6-pcn-20160915.pdf This is from the solidrun website: Make sure that your kernel .config has the following enabled either as modules or statically part of the kernel, in order to build the TI WiLink8 WiFi drivers -CONFIG_WL18XX=yCONFIG_WLCORE=yCONFIG_WLCORE_SPI=yCONFIG_WLCORE_SDIO=yCONFIG_WILINK_PLATFORM_DATA=yCONFIG_WL_TI=y# CONFIG_WL1251 is not set# CONFIG_WL12XX is not setThe firmware i…

the current filogic kernel has no info [in github] for where it was forked from, and trying to apply incremental patches from kernel.org I found it contains pieces of 6.14 in an ostensibly 6.12 branch. @chainsx might you be able to divulge where you forked it from?

I don't see it specifically listed, but does Armbian run on the Beaglebone black?

Hi guys. I wanna ditch archlinux because its continuos issues with Kodi and uwsgi. Does Debian for arm play good with Kodi? Is there any major issue besides the network speed? Thanks!

Hi, Is there anyone out there who could explain why I cannot do any upgrade on my Cubox i4 anymore? On boot it looks like this: [ 0 security updates available, 9 updates total: apt upgrade ] Last check: 2017-11-26 04:06 Thanks!

I'm thinking of getting https://www.beagleboard.org/boards/beagley-ai I see there is this page for it https://www.armbian.com/beagley-ai/ I also see references to it in the code: https://github.com/search?q=org%3Aarmbian+beagley&type=code Are there any pre-built images available for it? Or would I have to build one?

Hi all, This is my first post! My cubox-i4x4 won’t boot with a second usb device plugged in. I am running the latest version of Armbian Jessie (Vanilla Kernel). I have done “nand-sata-install†booting rootfs from usb flash memory. Someone having a clue?

First of all, sorry if I'm asking something really obvious, but I'm new in Linux. Hi! I just have a new fresh install of Armbian Stretch on my Cubox, and I just realized that Armbian isn't using the Predictable Network Interface Names but the old one. root@opl-cubox:/home/lpuerto# ifconfig eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet 192.168.1.6 netmask 255.255.255.0 broadcast 192.168.1.255 inet6 fe80::d263:b4ff:fe00:8297 prefixlen 64 scopeid 0x20<link> ether d0:63:b4:00:82:97 txqueuelen 1000 (Ethernet) RX packets 411 bytes 50456 (49.2 KiB) RX errors 0 dropped …

This post is, more or less, a continuation of something I started here, but adapted to Armbian. I will start with an overview of what I have done (maybe this is relevant) and finish with my questions. What I've done: I have a Hummingboard Gate with a Mikrobus RS485 click 3.3V (this one: https://www.mikroe.com/rs485-33v-click). In order to make this work I need to change a few things in de device tree. The dtb that my board uses is 'imx6dl-hummingboard2.dtb' so I copy that file to my home directory for safe keeping. cd ~ sudo cp /boot/dtb-4.19.18-cubox/imx6dl-hummingboard2.dtb . Then I convert this dtb to a dts: sudo dtc -I dtb -O dts -o im…

Hello I downloaded Armbian for a CuBox i4P from https://redirect.armbian.com/region/EU/cubox-i/Bionic_current_desktop. uname -a reports: Linux cubox-i 5.10.12-imx6 #21.02.1 SMP Wed Feb 3 21:02:35 CET 2021 armv7l armv7l armv7l GNU/Linux However this image is working really fine, for a 7yo hardware. Thank you, Developers 2D software rendering is fast, Desktop windows are transparent. Great work! I tried Armbian Focal desktop mainline first, but it didnt show the desktop never again after first reboot, so i was happy with Bionic! Found similar problem here and i think i just need the correct xorg driver. Thanks for a…

U-Boot 2017.05-armbian (Nov 30 2022 - 10:45:39 +0000) for ODROID-XU4 CPU: Exynos5422 @ 800 MHz Model: Odroid XU4 based on EXYNOS5422 Board: Odroid XU4 based on EXYNOS5422 Type: xu4 DRAM: 2 GiB MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 1 MMC Device 0 ( SD ): 59.5 GiB Card did not respond to voltage select! mmc_init: -95, time 11 *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: No ethernet found. Press quickly 'Enter' twice to stop autoboot: 0 ** File not found /boot.ini ** ## Executing script at 43e00000 Wrong image format for "source" command 12548 bytes read in 44 ms (278.3 KiB/s) ## Executing script at 43e00000 111 by…