Software, Applications, Userspace

ZFS-DKMS doesn't work on vanilla image https://dl.armbian.com/longanpi-3h/Bookworm_current_minimal Image is freshly burnt to the SD card. root@longanpi-3h:~# apt update root@longanpi-3h:~# apt install zfs-dkms root@longanpi-3h:~# modprobe zfs modprobe: ERROR: could not insert 'zfs': Exec format error root@longanpi-3h:~# modinfo zfs | grep -v parm filename: /lib/modules/6.12.23-current-sunxi64/updates/dkms/zfs.ko version: 2.3.1-1~bpo12+1 license: CDDL license: Dual BSD/GPL license: Dual MIT/GPL author: OpenZFS description: ZFS alias: zzstd alias: zcommon alias: zunicode alias: znvpair a…

Hello there, i need help trying to get the touchscreen to work, i have the hdmi display setup working, touchscreen doesnt work. I am using: Banana pi M2 Berry and for the screen: 5 inch Resistive Touch Screen 800x480 HDMI TFT LCD i am running armbian jammy (old release) i have tried the guides (ik this is 64 bit i did the conversions): no luck

I need to completely disable apparmor on the kernel level on my arm sbc. Ive tried adding: apparmor=0 to the env text file and setenv apparmor "0" in the boot cmd Neither have disabled it. How can i disable apparmor in the kernel?

In Gnome, there are two shortcuts, armbian-config and armbian-configNG. What's the difference?

I have Armbian running on an Orange Pi and I like to work by changing to su so I'm not having to constantly type sudo in front of commands when I have a lot of commands that need root privilege. However, bizzarely, sometimes I still ahve to use sudo. So for example: root@orangepi5-plus:/home/Data/Mercurial_Info# usermod -a -G www-data username bash: usermod: command not found If I do sudo usermod -a -G www-data username How can I fix this please? It's also stopping me running a script I need that I ran on my old Banana Pi running Armbian.

I have upgraded multiple RockPiS that were happily working - new version is Armbian 22.08.8 stable - but the latest version of Armbian-config no longer includes WiFi Access point creation/ management, and seems to disable the Access Point functionality. I am hoping this is an error that will be fixed - but if not, is there any way to downgrade the version of Armbian-Config - or turn the Access Point back on ?

i have 2 USB LTE modems (quectel ec25) and i most of the time i get "wwan0" (modem 0) and "wwan1" (modem 1) network interface names, but sometimes they switch to "wwan0" (modem 1) and "wwan1" (modem 0), sometimes i get "wwx*" interface name on one of them and "wwan1" on the other, this is very sad ;(. How can i get "wwx*" for both of them? modems are connected after the system is already started im using latest jammy cli image on opi zero, the only thing i did is installed "modemmanager" and created 2 gsm connections in networkmanager

Hello everyone! I’m new to the forum and recently set up Armbian on my Orange Pi using the latest July 2025 image. I’m working on a user-space application to monitor fuel consumption for IoT projects involving vehicle fleets, like optimizing diesel trucks. I’m thinking of something that could run via armbian-config or as a Python script, pulling data from fuel sensors. So far, my idea is to log consumption data and calculate efficiency based on user input. I’ve tried Grafana, but it lacks a dedicated fuel calculator—kalkulatorpaliwa.com.pl could serve as a starting point for a simple interface. I’m unsure how to approach this on Armbian—should I use Python with Mat…

https://paste.armbian.com/puwoqoxesi Hi there Running Armbian 22.11.4 on OrangePi docker ps -a actually shows all of my containers fine, but docker ps shows that only a few are actually running When I connect my monitor to the device this is what I’m seeing: Any ideas on what could be the issue here? orange login: [ 25.402264] unisoc_wifi unisoc_wifi wiano: sprdwl_report_connection Non failed status code:1! [ 25.547756] HCN ERR: dumpmem_rx_callback open error no.-21 retry:1 [ 25.986960] surxi-mmc 4021000.mmc: data error, sending stop command 25.998135] sdiohal err:dt read fail ret:-110, system_addr=0x4024f000 [ 26.010990]…

ROCKCHIP Rk3318 firmware

I have a strange issue trying to update/switch kernel and installed header packages: when I open armbian-config > System > Other the tool loads 137 sources and then shows the warning by switching as expected but then returns to the "System Settings" menu without doing anything same issue when trying to install kernel headers - just doing nothing I worked around for now by manually install the required headers from https://mirrors.dotsrc.org/armbian-apt/pool/main/l/ but next time I do a apt upgrade this will byte me again. is there any log where I can see possible issues? Is there a way to check / fix the armbian-config set…

About 2h ago most of APT repositories (probably in the mirror) became empty and I can't install packages anymore (both my desktop and CI runner): http://armbian.tnahosting.net/apt/dists/jammy/ is totally empty and most other releases as well.

Okay, where do I start.... Armianmonitor: https://paste.armbian.com/oletimumob I have this ancient Opi+. AND I KNOW THOSE TYPES OF UPDATES ARE NOT SUPPORTED. Yet, they often succeeds and I want to upgrade my system via do-release-upgrade For last six months I am stuck on this, attaching output from putty login screen AND lsb_release as a printscreen My sources.list.d look like this orangepiplus:sources.list.d:% dir armbian-config.sources armbian.list ubuntu.sources orangepiplus:sources.list.d:% cat armbian-config.sources Types: deb URIs: https://github.armbian.com/configng Suites: stable Components: main Signed-By: /usr/share/keyring…

Hello, I have a 5.5" waveshare hdmi screen. For some reason it is blank on all my SBCs. Vim3, vim4 with armbian so far. It works perfectly for my Mac mini running Arch. I've tested cables and power. It has instructions for special settings to add to pi os' /boot/config.txt. Hdmi_force_hotplug=1 Among other things. Is it possible I need the same for armbian? Where would that go?

I know this might get ignored, but honestly, I don’t really mind. I just want to report something I noticed a few days ago, which I initially thought was caused by my previous setup. I was running a Radxa CM5 with a Waveshare CM4 Nano-C board, using an Armbian image for the Rock 5A. This was the only way I could get it working with mainline support. I’m aware this setup is far from standard I’m essentially using the wrong image but that’s because the Radxa CM5 IO board isn’t compatible with the Waveshare Nano board. On top of that, Armbian doesn’t officially support the CM5 RPi-CM4 IO board provided by Radxa (which does work with the Waveshare Nano, but their imag…

I am about ready to shoot my want to be server. I have an Ubuntu samba server running a public share on my LAN. The share has no username or password required to make it windows friendly. No other system has issues accessing it. I have a new ROCK64 running Armbian 23.11.1 Bookworm CLI. It will not mount a CIFS share at boot, but will mount it with a mount -a command. Fstab entries that have not worked: //192.168.15.150/15tb_NAS/Data/ /mnt/NAS cifs rw,user=,password=,file_mode=0777,dir_mode=0777,async,x-systemd.automount 0 0 //192.168.15.150/15tb_NAS/Data/ /mnt/NAS cifs vers=3.0,rw,user=,password=,file_mode=0777,dir_mode=0777,asy…

Finally there is a proper tor-browser available for arm64/aarch64: 1. Goto https://nightlies.tbb.torproject.org/nightly-builds/tor-browser-builds/ 2. Navigate into: tbb-nightly.<date>/nightly-linux-aarch64/ 3. Download tor-browser-linux-aarch64-tbb-nightly.<date>.tar.xz 4. Unpack with tar -Jxvf and run tor-browser/start-tor-browser.desktop Yay! (I'm sure you can compile it too from their github page)

So how do I totally disable so access once logged in doesn't timeout in 5 minutes putting machine in sleep mode which disables remote access too? At 16 watts, it can run 24/7/365.25 doing its job which is as a backup server. Thanks all.

Hi everyone, I'm working on a bunch of arm boards, where I installed armbian on the eMMC I'm trying to re-flash some of them, via SD and then via nand-sata-install, but something is wrong A fresh SD works, as in: boot from SD run nand-sata-install select eMMC run and wait But as soon as I try to do it a second time, on a second board, it breaks, meaning that nand-sata-install doesn't show any storage device, while /dev/mmc* it's recognized from linux (image 1) INFO: Armbian monitor log $ uname -a Linux rockpi-s 6.0.10-rockchip64 #22.11.1 SMP PREEMPT Wed Nov 30 11:20:25 UTC 2022 aarch64 GNU/Linux

Hello, I can only find the "rear-doc" packet but not the "rear" packet. Armbian 24.8.4 bookworm on armv7l Do you have to activate a repo? ------ Hallo, ich finde nur das "rear-doc" packet aber nicht das "rear" packet. Armbian 24.8.4 bookworm auf armv7l Muss man da noch ein Repo aktivieren ?

Hi Everybody, I'm trying to set up Nextcloud with Collabora Office on NanoPi R4S running Armbian, but I'm having trouble configuring the reverse proxy (nginx/Caddy) for HTTPS with local domains. Current Setup: Running via docker-compose.yml (shown below) Without HTTPS, everything works: Collabora can open documents in Nextcloud's web UI With HTTPS enabled, Collabora integration breaks Added to /etc/hosts: 127.0.0.1 nextcloud.lan collabora.nextcloud.lan What I Need: HTTPS configuration for both services Reverse proxy to local domains: Nextcloud: https://nextcloud.lan Collab…

So I am following instructions for how to install Kiauh on Arbmian. I am using a terminal on my PC through PuTTY. I have cloned the Kiauh files to my device successfully, I have verified they are there, but whenever I try to run the shell using sh ./kiauh/kiauh.sh I get the response 'unknown': I need something more specific. This is the least useful error message I have ever seen. I can't find anyone having had this issue and I am dead in the water. Any insight would be greatly appreciated!

Hello, I have downloaded image from https://dl.armbian.com/odroidhc4/Bookworm_current_minimal-homeassistant Build Date: Oct 3, 2024 I was not able to flash the image with Balena Etcher. Error [Main Instruction] Error opening source [Content] Something went wrong while opening C:\Users\marek\Downloads\Armbian_24.8.1_Odroidhc4_bookworm_current_6.6.47-homeassistant_minimal.img. Error: (0 , h.requestMetadata) is not a function Then I tested sha integrity and CRC failed with 1 error (not found 1) Same result with image for Odroid C4 HASS and Odroid OMV Any idea what can I try? Thanks Marek

TERMINAL isnt easy to find.. I would have installed a shortcut on the desktop

Hi all, I succeded to install Armbian bullseye on a S905x TV box Works well. I succeeded to install OpenVPN server I failed to install OpenVPN Access Server Option 1: E: Unable to locate package openvpn-as apt update && apt -y install ca-certificates wget net-tools gnupg wget https://as-repository.openvpn.net/as-repo-public.asc -qO /etc/apt/trusted.gpg.d/as-repository.asc echo "deb [arch=amd64 signed-by=/etc/apt/trusted.gpg.d/as-repository.asc] http://as-repository.openvpn.net/as/debian bullseye main">/etc/apt/sources.list.d/openvpn-as-repo.list apt update && apt -y install openvpn-as Option 2: dpkg: error: cannot acc…

Hi all, what would be the correct way in recent Armbian distributions to bring up a CAN interface? As far as I'm aware NetworkManager does not support CAN interfaces Ifupdown somehow feels deprecated nowadays systemd-networkd.service seems to be masked by default Any insight would be appreciated.

I recently flashed armbian desktop for my raspberry pi 5 and I needed libcamera but it was missing. I tried most methods I could find but nothing worked. Any suggestions please.

If you ever got a solid green frame trying to play H.265 through the RK3588 VA-API driver — on any image, any board — here's the closure: it was never your setup. HEVC never worked in this driver. It advertised the profiles, but there was no HEVC bitstream assembler in the code; the VPU received unparseable data and handed back empty (green) buffers. Two years, every user, same green. The assembler now exists on the deep-ink branch, and the verification is numeric, not eyeballed: hardware-decoded frames compared pixel-by-pixel against software decode — identical, at 8-bit and at 4K HDR10 (Main10). The comparison tools are committed (tools/hevc-ladder.sh) so you c…

Before I do something that breaks forum rules I'd rather ask. Can I post a link to githyb with a script I made to backup sbc:s (incl Armbian ofc)? The reason it even exists is because of when I first started using armbian and wanted something I could backup both rpi os and armbian. Can I post it here or is it prefered to keep it in the "anything" thread? Regards.

I'm having a weird problem when trying to SSH into a wireless SBC running Armbian (Ubuntu 22.04.01 LTS). When I try to SSH using the full domain name it doesn't respond: vmplayer@vm-play:~$ ssh -l potato potato-blue.mostly-harmless.wlan ^C If I force IPv4 then it'll connect vmplayer@vm-play:~$ ssh -4 -l potato potato-blue.mostly-harmless.wlan potato@potato-blue.mostly-harmless.wlan's password: Doing a lookup reveals both IPv4 and IPv6 addresses: vmplayer@vm-play:~$ nslookup potato-blue.mostly-harmless.wlan Server: 127.0.0.53 Address: 127.0.0.53#53 Non-authoritative answer: Name: potato-blue.mostly-harmless.wlan Address: 10.2…

Hello to all, As I am a beginner, I apologize in advance, if I am asking questions, which are obvious for experienced users... I am trying to get WIFI working with this hardware: Odroid C4 and Odroid WIFI module #5B Realtek RTL8821CU chipset ( USB ID = 0BDA:C820, Initial CDROM mode = 0BDA:1A2B ) With the original image of Hardkernel the WIFI was working fine. Then I built this latest armbian image: Armbian_23.02.0-trunk_Odroidc4_jammy_current_6.1.8_xfce_desktop.img The build I did with this configuration: ./compile.sh BOARD=odroidc4 BRANCH=current RELEASE=jammy BUILD_MINIMAL=no BUILD_DESKTOP=yes BUILD_ONLY=default KERNEL_CONFIGURE=no…

I recently acquired some nanopc t4, I wanted to install casaos, openmedivault, friendlywrt, pihole, and things like that, it turns out that no matter what operating system I install, armbian, ubuntu, lubuntu, debian, or the official ones, I never have access to the installed services, that is I can not access casaos from another pc, as if there was a firewall that blocks incoming connections, I only have access via ssh, if I pin to the ip address (192. 168.0.31 for example) all good, there is no firewall installed, with all the systems the same thing happens to me, in all the nanopc, I only have access from the same nanopc, that is to say, 127.0.0.1, but it is impossible …

v25.8 rolling for aml-s9xx-box running Armbian Linux 6.12.35-current-meson64 Printer is Canon G2770 I suspect its a driver problem since gutenprint does not have the exact same model (I chose Pixma G2000 Driver in CUPS "Add Printer" menu) #When Adding Printer d [20/Feb/2026:03:19:36 +0700] [CGI] Finished \"{default_name=Canon_G2070_series\", out=0xffffb9ff1520... d [20/Feb/2026:03:19:36 +0700] [CGI] \"{printer_uri_supported}\" at 367... d [20/Feb/2026:03:19:36 +0700] [CGI] \"{$org.cups.sid}\" at 452... D [20/Feb/2026:03:19:36 +0700] [CGI] Regular expression \".*Clean.*\" d [20/Feb/2026:03:19:36 +0700] [CGI] Starting \"{printer_commands~.*Clean.*\" at…

on rasbian i can hide all startup message logs just by adding this console=tty3 silent quiet splash loglevel=0 logo.nologo vt.global_cursor_default=0 plymouth.ignore-serial-consoles consoleblank=0 in /boot/cmdline.txt how can i do the same on armbian?

Just got this error on a sudo apt update.

Hi guys, this is totally new, I have been always able to connect to my remote server from my Odroid-XU4 so far. However, today I got stuck at this step: OpenSSH_9.2p1 Debian-2, OpenSSL 3.0.9 30 May 2023 debug1: Reading configuration data /home/odroid/.ssh/config debug1: /home/odroid/.ssh/config line 10: Applying options for freezr debug1: Reading configuration data /etc/ssh/ssh_config debug1: /etc/ssh/ssh_config line 19: include /etc/ssh/ssh_config.d/*.conf matched no files debug1: /etc/ssh/ssh_config line 21: Applying options for * debug1: Connecting to $REMOTE_HOST$ [$REMOTE_HOST$] port 22. debug1: Connection established. debug1: identity file…

i used this python script to read matrix 4x4 keypad data to raspberry pi import RPi.GPIO as GPIO #raspberry pi import time # these GPIO pins are connected to the keypad RPI L1 = 21 L2 = 23 L3 = 27 L4 = 29 C1 = 31 C2 = 33 C3 = 35 C4 = 37 # Initialize the GPIO pins GPIO.setwarnings(False) GPIO.setmode(GPIO.BCM) GPIO.setup(L1, GPIO.OUT) GPIO.setup(L2, GPIO.OUT) GPIO.setup(L3, GPIO.OUT) GPIO.setup(L4, GPIO.OUT) # Make sure to configure the input pins to use the internal pull-down resistors GPIO.setup(C1, GPIO.IN, pull_up_down=GPIO.PUD_DOWN) GPIO.setup(C2, GPIO.IN, pull_up_down=GPIO.PUD_DOWN) GPIO.setup(C3, GPIO.IN, pull_up_down=GPIO.PUD_DOWN) GPIO.setup(C…

Hi Guys, I am looking for an OEM camera for my Robotic ARM project. Can anyone suggest me a camera that can be compatible with NVIDIA Jetson AGX Orin development kit? I came across e-con Systems’ cameras that can be compatible with Jetson AGX Orin. Has anyone tried e-con Systems’ cameras before? The listed cameras are perfectly suiting my needs. But I would like to know if any other options are available in the market. It would be great if you could suggest me the same.

Updated to version 1.4. Please see Shrink-backup github for full information. Release notes: Autoexpansion added for rpiOS trixie Fixed detection and autoexpansion for DietPi Version included in logfile "Confirmation window" updates: Moved into a function Inclusion of device paths Countdown timer for `ctrl+c` if `-y` option is selected -------------------------------------------------------------------------------------------------------------------------------------------------------------------- shrink-backup is a bash script for backing up your SBC into a minimal img file with autoex…

Hello, I have an odroid hc4 which I am mainly using as a home NAS. I chose Armbian + OMV (headless) and it works really well. Now I tried using it as a media center at the same time with kodi. I tried both the "old" kodi version from the debian repos and also the flatpak version. For both it seems like the hardware acceleration isn't working. I can run youtube 1080p with vp9 quite fine, but neither 1080p with h264, nor anything 4k, at this resolutions it's stuttering a lot. Also the CPU-usage is always very high. When i start flatpak-kodi it returns: 'this->recurse > 0' failed at ../src/pipewire/thread-loop.c:62 do_unlock() libva info: VA-…

https://github.com/sgjava/javauio2 Java UIO 2 is the next-generation evolution of the Java UIO project, rebuilt from the ground up to leverage the Foreign Function & Memory API (FFM). By moving beyond traditional JNI, Java UIO 2 achieves unprecedented performance and hardware-level accuracy for Linux Userspace IO. Engineered for JDK 25, it provides a cutting-edge cross-platform solution for modern embedded systems. You will see a huge improvement in performance on 64 bit systems, but I've also included a script to build ARM 32 JDK 25 with FFM which currently doesn't exist. https://github.com/sgjava/javauio2#arm32-support--modern-ffm-back-to-the…

First of all, thanks to the project maintainer Jason and all the devs who got my little MangoPi MQ Pro to boot to a snappy GUI desktop with a functional mouse, keyboard, and 802.11. That alone is absolutely awesome. I'm using an RISCS-V SBC Mango Pi MQ Pro Version 1.4 https://mangopi.org/mangopi_mqpro. Armbian 23.06 Sid trixie board name: "Nezha" Build Repository URL: https://github.com/150balbes/build.git Build Repository Commit: e4c493f84-dirty Armbian didn't ship with any apt repositories that I can identify. Seeking software with apt install always returns no matches, even for very common software. Arm…

I got armbian installed on orange pi5 plus. in the orangepi distro, here's in the manual to open the HDMI in I can't find the options on armbian.

I am using the latest Armbian Noble image (version 6.6.8) on my Banana Pi CM4. For my application, I am utilizing the Linux UART (/dev/ttyAML0), which is currently printing dmesg logs on this port. Is there a way I can disable dmesg debug logging and exclusively use /dev/ttyAML0 for my application? Thanks.

Hi mates, unfortunately I've lot of problems with IPv6, the programs I use love to use IPv6 to bind their TCP ports and not IPv4, I suppose this is not up to them but the kernel suggest/force them use it first. How can I get completely rid of IPv6? I want to kill it completely, it doesn't matter for me to enable it in future. I've disabled using armbian-config and checked /etc/sysctl.conf, there are these lines: net.ipv6.conf.all.disable_ipv6 = 1 net.ipv6.conf.default.disable_ipv6 = 1 net.ipv6.conf.lo.disable_ipv6 = 1 but thy don't have affect. Maybe this is a bug of armbian? I suppose so.. Thanks for support

Hi all, I'm quite puzzled by this. I installed iptables-persistent to be able to restore the iptables rules at start-up. Saved the rules to /etc/iptables/rules.v4 / /etc/iptables/rules.v6, then rebooted. But after boot, the iptables are empty. Looking at the status of service netfilter-persistent, it looks like it has ran the scripts to restore the rules: root@gateway:/etc# systemctl status netfilter-persistent.service ● netfilter-persistent.service - netfilter persistent configuration Loaded: loaded (/lib/systemd/system/netfilter-persistent.service; enabled; preset: enabled) Drop-In: /usr/lib/systemd/system/netfilter-persistent…

Installed 24.8.4 on OrangePi Zero2. Assumed I would need to install neofetch to launch it, so didn't even try to run it before going straight to 'apt install neofetch'. On attempting to install, I saw the following: Reason is that armbian-config package includes /usr/bin/neofetch. To avoid confusion for new users, it seems like it would be good to either have armbian-config depend on neofetch instead of including the bash script that that package includes*, or have the Package file for armbian-config lock out the installation of neofetch (I think the Provides, Replaces, and Conflicts directives might be needed for that). I had a look around the https:/…

Hi all, I'm still working on video hwaccel with some progress. Can anyone provide a confirmed working ffmpeg command line for camera capture and hardware encoding? I dont care about the platform, either rockchip or anything else, no matter about kernel or arbiam version. Using v4l2request is the only requirement. I'm using either 7.1.1 with libreelec patches or @Kwiboo's fork. I know there are a bunch of threads here and elswhere in the web but most are outdated, dealing with vaapi or other stuff, but I want to stay on v4l2 which seems to be the future. Thanks! T.

Hello using an inovato quadra and would like it to start a specific program on boot how do I go about doing such a thing Pointer or instructions appreciated Thank you Jacques

I am trying to debug some sporadic issues with my wireless chip (AP6212 - on a BPI-M2 Zero). Looking through other forum posts, I'm wondering if the proper firmware is being loaded, as well as the proper NVRAM settings. I'm not new to Linux (I started using Linux around 97), but I haven't really dove into wireless firmware before, and it's all pretty mysterious to me. A previous forum post points out that the AP6212-specific firmware might not be being loaded. I checked, and in fact, it wasn't loading the firmware from the AP6212 (it looked like it wasn't loading any firmware - it was looking for brcmfmac43430-sdio.sinovoip,bpi-m2-zero.bin but only brcmfmac43430-sdio.…

Hi All, Current running a RockPi4C+, it has crashed after a dist-update (it seems that uboot update not recognize my nvme), then, I reinstall it, on SD card only , but only found a community rolling version, And, now that my system is booting, I want/need to go back to stable, I read about armbian-config to do that, but not enable on RockPi4C+ What is the "cli" way Thank you

I'm using an external USB SSD to build an image, and get this error: Adding Armbian repository and authentication key [ image-early :: /etc/apt/sources.list.d/armbian.sources ] [🌱] Disabling Armbian repo [ arm64-bookworm :: skip:no when:image-early ] mount: /media/steven/SSD/build/.tmp/rootfs-988d6aec-74e2-4c44-bd6b-013049454c46/armbian/cache: special device /armbian/cache does not exist. dmesg(1) may have more information after failed mount system call. [💥] Error 32 occurred in main shell [ at /media/steven/SSD/build/lib/functions/general/chroot-helpers.sh:32 mount_chroot() --> lib/functions/general/chroot-helpers.sh:32 …

Hi, I have problem with full disk /var/log and to problem is with systemd-journald. I can't understand, how it works. armbian-truncate-logs works fine. When is /var/log more than 75% full, the script truncates a log and files are copied to disk /var/log.hdd -> no problem here before midnight is my /var/log 40% full after midnight is my /var/log 100% full When I was investigating, where the problem was, I found that /var/log.hdd was bigger than the size of my partition /var/log. The biggest folder is /var/log.hdd/journald There are so many files in /var/log.hdd/journald An…

Hi, unable to install any sofware, error: docker: Error response from daemon: failed to set up container networking: network lsio not found

Hello community I've been struggling to find statistics and/or good references to commonly used host-based intrusion detection systems on Linux servers. Is there a recommendation from someone with experience and who has ideally deployed such systems? It would be helpful to see which HIDS you use or recommend. Regards, nobuzlata

In the official Armbian Radxa Rock 5C Gnome image (nobel) the WiFi hardware is detected, but in the server image (nobel) the WiFi hardware is not detected. Edit. I see I can use WiFi in armbian-config, but it does not show up in gnome on the server image.

The project has turned out to be a gem. I can retire Joshua Riek Fork I am calling it Pi Desktop 3.0 Plaid (Not live yet... expect a week of soak). They should take and call it Armbian Rockchip Resolute The combination Pi Claude called the make-or-break unknown this morning — a 26.04 userland has no business running on a 2023-era Rockchip BSP kernel, but it does: Chromium/Chrome Hardware acceleration with no web rendering flickering. Firefox runs everything but 8 bit HEVC... so far 26.04 / GNOME 50.1, mutter 50.1, Mesa 26.0.8 libmali G610 g24p0 (newest G610 blob that exists) on kbase g29p1 rockchip-linux/mpp 2026-08-05 snapshot (yisding's resolute …