Efe Çetin

Do you see anything on UART log in case you connect OPi to PC with USB-TTL converter?

Interesting, will try to reproduce it after getting DP-capable type-c cable, will let you know the results with different RK3588S boards.

Is it also broken with vendor kernel?

It is not early fix, but now it should work as expected on non-vendor kernels https://github.com/armbian/build/pull/10289 Also it works flawlessly on vendor kernel with previous overlay

Will check it when i back to PC, will be away from pc for around a week

Choose install/update bootloader on spi flash option on armbian-install. Some uart logs could be useful if you have usb-ttl converter stuff

Could you try to write SPI image to spi flash manually? (not the sata one) Also, can you send the content of /boot/armbianEnv.txt which is located in the ssd.

Can you send dmesg lsusb and lsmod outputs using paste.armbian.com

The image from https://dl.armbian.com/orangepi5/Noble_vendor_gnome works well for me. It might be good to see some GDM logs as i am not sure where the problem arises from.

@Egertcan you send inxi -G output

What if you clear SPI Flash and then try to boot emmc?

Yes it's not supported by mainline kernels yet. Perhaps it might be worth to try to backport wacom drivers to 6.1 kernel.

It is fixed now. It should work if you update kernel from beta repo

I will check it to find what's wrong. Unfortunately it might take some time since i don't have any 2k screen

Which resolution are they working at? And does it work with Khadas images

1440p should be supported on both 6.1 and 6.10 images but it's recommended using 6.1 images as 6.10 HDMI is still WIP

It will get fixed by this PR: https://github.com/armbian/build/pull/7015 If you don't want to wait approval of the PR, copy this overlay https://github.com/efectn-forks/build/blob/rk3588-edge-v6.11/patch/kernel/archive/rockchip-rk3588-6.11/overlay/rockchip-rk3588-hdmirx.dtso & replace okay with disabled and then add if as an user overlay using armbian-add-overlay -> https://docs.armbian.com/User-Guide_Allwinner_overlays/

OPi 5 Pro is not yet supported for 6.10 kernel and if you want it supported someone has the board needs to add its DT tohttps://github.com/armbian/build/blob/main/patch/kernel/archive/rockchip-rk3588-6.10/dt. If you're interested in making the board work in mainline you can take https://github.com/armbian/build/blob/main/patch/kernel/archive/rockchip-rk3588-6.10/dt/rk3588s-orangepi-5.dts devicetree as reference. You need to adjust regulators, some devicetree nodes, properties etc.

It won't be requiring any external packages soon -> https://github.com/armbian/build/pull/6947/files

@rosbeef have you ever tried to update DDR and BL31 blobs? 5plus still uses old blobs that may cause the issue. You can update blobs by putting ``` DDR_BLOB='rk35/rk3588_ddr_lp4_2112MHz_lp5_2400MHz_v1.16.bin' BL31_BLOB='rk35/rk3588_bl31_v1.45.elf ``` to the https://github.com/armbian/build/blob/main/config/boards/orangepi5-plus.conf and compile the new uboot spi image/package or new image.

Download https://github.com/armbian/linux-rockchip/blob/rk-6.1-rkr1/arch/arm64/boot/dts/rockchip/overlay/orangepi-5-sata.dts and add it to the system using armbian-add-overlay orangepi-5-sata.dts it seems Like we don't have an overlay for sata0 for edge kernel yet

@JamesCL did you enable the sata overlay?

@DroZDI which image did you download

It's interesting. I'll check it out to see what's missing

You need something like https://github.com/armbian/build/blob/main/patch/kernel/rockchip-rk3588-edge/dt/rk3588s-orangepi-5b.dts#L32 to enable it on mainline. I don't know the situation because of i don't have ap6275p module for opi5 but it works with Khadas edge 2. And we have an overlay for opi5 in 6.1 https://github.com/armbian/linux-rockchip/blob/rk-5.10-rkr6/arch/arm64/boot/dts/rockchip/overlay/orangepi-5-ap6275p.dts