Allwinner sunxi

Hello, I am new to Orange PI and Armbian. I try to configure orange pi to run chineese LCD 5 inch screen via HDMI. I managed to do that using lubuntu downloaded from orangepi server. I changed fex file to what I found on the internet: [clock] pll_video = 321 [disp_init] disp_init_enable = 1 disp_mode = 0 screen0_output_type = 3 screen0_output_mode = 2 screen1_output_type = 3 screen1_output_mode = 2 fb0_width = 720 fb0_height = 480 fb0_scaler_mode_enable = 1 fb0_pixel_sequence = 2 fb0_format = 4 fb0_framebuffer_num = 2 fb1_width = 720 fb1_height = 480 fb1_scaler_mode_enable = 1 fb1_pixel_sequen…

Hey! I have Lime2-Server from olimex here and get no internet connection. I configured eth0 via nmtui and tried to activate it, but I get: "could not activate connection: the device could not be readied for configuration". Any idea or known issue? best regards armybee

Hello ! Aftert installing new image (Armbian_5.04_Bananapipro_Debian_jessie_3.4.110) onto Banana PI, I can't start desktop, startx command is not recognized. Neither root or normal user. Any idea wha't going on? Regards! Mladen, Herzegovina

I'm currently running ARMBIAN 5.25 Debian GNU/Linux 8 (jessie) 4.10.12-sunxi on my Cubietruck, which otherwise works fine as a headless data and media server. However, as I don't need any Bluetooth service whatsoever in the given environment, I have been trying to get rid of it - in vain. Is there a safe and lasting method of preventing the Bluetooth module from loading on reboot? Can it be stripped from the system at all completely? Many thanx in advance

Hello! I build my own image using the provided scripts. I want to be able to run a headless opi system just with ethernet and two usb wireless interfaces. The lastest build works fine when you are using it but doesn't boot if a HDMI cable is not connected. If you boot it with a HDMI plugged in there is no problem, boot ok, ethernet up and all right. I think that could be a configuration of u-boot but there isn't config files in the filesystem of the pi. Anybody kwow the solution? Thanks!

I recently updated from very old Armbian image. The update was not smooth so I had to re-image my device with the newest version. After that USB devices cannot be detected at all. I tried USB keyboard and 3D printer (is should looks like generic serial device). Keyboard works perfectly during u-boot but stops working as soon as kernel starts. lsusb doesn't show any devices: $ lsusb -t /: Bus 09.Port 1: Dev 1, Class=root_hub, Driver=musb-hdrc/1p, 480M /: Bus 08.Port 1: Dev 1, Class=root_hub, Driver=ohci-platform/1p, 12M /: Bus 07.Port 1: Dev 1, Class=root_hub, Driver=ohci-platform/1p, 12M /: Bus 06.Port 1: Dev 1, Class=root_hub, Driver=ohci-platform/1p, 12M /: Bus…

Hi all, I am new to this forum. I just got a Orange Pi plus 2E. The specs are nice and the price is competitive. However, I don't seem to find an image with gpu working well. No hardware acceleration available. This means I cannot use chrome properly / watch videos / play web games with WebGL. From armbian website / logs: Mali OpenGL ES does not work on H3 boards with 2GB RAM (Orange Pi Plus 2, Orange Pi Plus 2e) Any idea when will the Mali driver work on 2GB RAM models? The OPi is nowhere near usable right now. Thanks!

Hi there, I've just got my first H3 board (OPi Zero +2) and I'm interested in learning how boot process works in detail, with a focus on Security ID features. As far I can see there's not that much documentation about S/NBROM (essentially linux-sunxi's Wiki and Allwinner-info git repo) and what's supposed to be H3's NBROM (header 1100, 1100, 1633) looks like slightly different from A10's one (from git) at first glance. Is there anyone here who has already worked on it and/or has info/symbols/pseudocode/whatever might speed up the reversing process? Thank you!

I have an Orange Pi PC that I bought from eBay a while ago and it works absolutely fine, has done for a month or so now. I have just bought 5 more from Xunlong's Aliexpress store, they arrived very quickly, however they don't appear to boot... Power rails are fine, 24MHz clock is fine, reset line is fine, fel mode registers with my PC fine, however no UART output, no apparent attempt to boot from the SD card. If boot it with the SD card in, I get absolutely nothing, if I boot it without the SD card, it gets into FEL mode and I can talk to it with sunxi-fel nick@nick-desktop:~/sunxi-tools$ sudo ./sunxi-fel ver AWUSBFEX soc=00001680(H3) 00000001 ver=0001 44 0…

Good day. My trouble - is not started spi, on orange pi pc, with ARMBIAN 5.25 stable Ubuntu 16.04.2 LTS 4.10.0-sun8i I read documentation for DTB overlays on official site https://docs.armbian.com/Hardware_Allwinner_overlays/ Check armbianEnv.txt, edit DTB (dts) sun8i-h3-orangepi-pc.dts And change status from "disabled" to "okay spi@01c68000 { ...... status = "okay"; ....... This is my /boot/armbianEnv.txt verbosity=1 console=serial overlay_prefix=sun8i-h3 overlays=w1-gpio spi-spidev param_spidev_spi_bus=0 But SPI not started This is boot log h…

My Pi Zero with H2+ and latest Armbian 5.35 Xenial works well, but on trying to increase the screen size I get: dk@desktop:~$ ssh dk@zero dk@zero:~$ sudo h3disp -m 1080p60 Unsupported board/kernel combination: Orange Pi Zero running 3.4.113-sun8i dk@zero:~$ Is this going to be fixed? nomachine.com's remote desktop for ARM works brilliantly Ubuntu + citadel-suite gets a mail server/chat server/+other into 337 MB - amazing!

Hi i have a problem trying to load the drivers of this camera, could you help me? Issue: mobprobe: FATAL: Module ov5647 not found in directory /lib/modules/4.14.84-sunix Board: Orange Pi Lite Camera sensor: OV5647 fisheye OS: Ubuntu - Armbian 5.65

So I did the following today: Spoiler sed -i /deb/s/jessie/stretch/g /etc/apt/sources.list $ sed -i /deb/s/jessie/stretch/g /etc/apt/sources.list.d/*.list apt-get update apt-get upgrade apt-get dist-upgrade Everything went fine except at the end where it complained about busybox not being there and it failed the update of initramfs... This was no issue. I installed busybox, rebooted, ran apt-get autoremove and then autoclean and everything worked fine. I was still on kernel 3.x, so I ran armbian-config but I did not see the latest kernel present in the switch kernel option. I ran apt-get install linux-image.next.sunxi (or some…

How enable UART1 (pin 8 and pin 10) or UART2 (pin 11 and pin 13) I re-read a lot of documentation but did not find a solution, everyone writes abstractly. There is a concrete decision how to include it for orange pi (zero or one) and armbian. Correctly I understand that UART1 is ttyS1 and UART2 is ttyS2?????? p.s. Help, I'm ready to even pay for help ) uname -a Linux orangepizero 4.11.5-sun8i #11 SMP Fri Jun 23 20:03:23 CEST 2017 armv7l GNU/Linux

RTL8211D PHY on OrangePi Prime is not detected neigther in uBoot mode or Kernel mode. Will share the logs ASAP. Please suggest!

I have an issue with armbian installed oPI PC+. I have it in a case with a cooling fan installed and connected to 2 GPIO pins. My question is: could the cooling fan connection be the cause for my oPI PC+ won't shut down from the power supply and keeps running in the background after i shut down armbian? Any suggestions, I haven't tried starting without the cooling fan yet.

Hi Does anyone know how to make output via CVBS by using mode 10? ( 1080p60 ) I try to do it by changing the script.bin without success. dmesg output shows [DISP] disp_device_attached_and_enable,line:159:attched ok, mgr1<-->device1, type=2, mode=10 But TV shows no signal. Any ideas? Thanks.

I need/want USB ethernet via OTG. I've wasted over 16 hours trying to get the g_ether module to work. A prominent poster told me that all recent Armbian images have this ability, just follow the directions... It's not. I'm using the stock Armbian image from this website, and I've updated it via "sudo apt update && sudo apt upgrade". Still no luck. The OTG connection currently shows up as a USB serial gadget, but I want a USB Ethernet gadget.

Hello, my external USB3.0 HDD is only recognized with USB 1.1. dmesg | grep usb: [ 0.180455] usbcore: registered new interface driver usbfs [ 0.180455] usbcore: registered new interface driver hub [ 0.180455] usbcore: registered new device driver usb [ 2.470043] usb 2-1: new high-speed USB device number 2 using sunxi-ehci [ 2.610042] usb 2-1: device descriptor read/64, error -71 [ 2.694427] usbcore: registered new interface driver usb-storage [ 2.716481] usbcore: registered new interface driver ums-alauda [ 2.728259] usbcore: registered new interface driver ums-cypress [ 2.740098] usbcore: registered new interface driver ums-datafab …

Hello, and sorry for my English. I install in my orange pi lite the armbian, but I can't config my TFT 7" correctly. The problem is that part of de left size of the screen is hidden and the botton size also. I tray to config with h3disp but depence of the config nothing happens or the screen became red. If I connect by ssh all is correct only is when conect the hdmi. Thank you

Hi, I am trying to use the two UARTS on the I/O pins which are UART 1 and UART 2 mapped to PG6/PG7 and PA0/PA1 respectively. I have had a look at the FEX file and these seem to be mapped correctly to UARTS's port 1 & 2 so I would expect these to be mapped to /dev/ttyS1 and /dev/ttyS2 but this does not seem to be the case. If I try to connect to these UARTs using screen I simply get the message: - root@orangepizero:~# screen /dev/ttyS1 9600 [screen is terminating] I have tried searching these forums and Google but have not really found anything - any help or pointers in the right direction would be much appreciated. Gerry

1) If a debugging cable(USB to TTL converter for serial communication in gtkterminal) is already connected in nano-pi neo board..If we power up the nano-pi it is not booting 2) If a debugging cable(USB to TTL converter for serial communication in gtkterminal) and power cable is connected simultaneously.. It is not booting... Why in this two condition the nano-pi is not booting?

OPiPC2, with Armbian Bionic desktop mainline based kernel 4.19.y Using it as headless server, all X and desktop stuff removed. Using PuTTY to log in via SSH, line drawing stuff (as usual) only works if translation is set to ISO-8859-1 in PuTTY. mc looks great, but all ncurses-based software (aptitude, htop, bmon etc) does not. Main problem seems that horizontal spacing is "shrunk" whenever there is no text to keep it: This is even more dramatic for menu systems and anything that is column-oriented. Tried dpkg-reconfigure locales to switch system to ISO-8859, but no change, really seems to be an ncurses bug. No such problem…

I tried to download the Opi plus 2 Image in armbian download page, but it linked In to Opi plus which is older hardware. There Are only plus 2e and plus Image. Here is the link : https://www.armbian.com/orange-pi-plus-2/ How can I get the image of Opi plus 2 ?? Plz let me know:(

Hi, I have a cubietruck 3 with a faulty SD card slot, how do I approach installing armbian on it? Thanks

Hello, I installed 2022-09-27-Armbian_22.11.0-trunk_jammy_edge_lubuntu_5.19.6-qt5-swap-bpi-p2z-10804MB.img on my Banana Pi Zero and it works great! I run sudo apt update , sudo apt upgrade ... Hours later, time to reboot. The board reboots and crashes.. See pic. Hmmm can't attach pics for some reason. First error I see on the screen says Failed to load '/boot/dtb/sun8i-h2-plus-bananapi-p2-zero.dtb libfdt fdt_check_header(): FDT_ERR_BADMAGIC No FDT memory address configured. Please configure the FDT address via "fdt addr <address>" command. Aborting! Then a bunch of other errors …

I have the Orange Pi Zero - working using last week's nightly build which has the WIFI intact and I've since updated using the usual apt-get upgrade. The WIFI is awful - wired is fine - I'm using Xenial - nmtui to setup - and I have two issues - despite turning off WIFI power management and being no more than 3ft away from the (new) access point - WIFI is so sluggish you can tell when typing into a terminal!! Also despite what nmtui should do - if I turn off the access point (simulating an issue with say power) and back on, the Orange Pi Zero will NOT reconnect even minutes later without rebooting. Anyone have ideas as to (a) how to improve the WIFI to make it us…

Hello :D! Im new customer of Orangepi board. My board: ORANGE PI PC. I have a question, some one have a guide or have try to create a script for make a button ON - OFF on GPIO on this board? I have try with ETA PRIME GUIDE FOR RASPBERRY PI 3 (u can find on youtube) but this guide is for raspberry pi 3, and dont work on orange pi. I have install this GPIO for orange pi from this guide : http://www.instructables.com/id/Orange-Pi-One-Python-GPIO-basic/?fref=gc I need really to put button on gpio and make on off board from here, very tnx at all!

There appears to be a problem or incompatibility with the new 2018.05 u-boot configuration and/or implementation and the Armbian sunxi-next startup scripts (both in the current master branch). The "fdt" command processing doesn't appear to properly expand local environment variables before trying to execute them (?). Here's an example from a vanilla Armbian boot (u-boot 2018.05) - notice the "libfdt fdt_path_offset() returned FDT_ERR_NOTFOUND" errors when the DT fixup script runs: ... Err: serial Net: No ethernet found. 230454 bytes read in 15 ms (14.7 MiB/s) starting USB... No controllers found Autoboot in 1 seconds, press <Space> to…

Hi, I'm new with Armbian, have some experience with Raspberry. I have succesfully installed it on a bananaPi. uname -a Linux bananapipro 4.4.3-sunxi #19 SMP Tue Mar 1 21:34:52 CET 2016 armv7l GNU/Linux Then I have installed Logitechmediaserver with dpkg -i logitech....deb It runs well, but after a reboot the installation is not there anymore. /var/lib is default, the init.d-script is also not there. Any hints? Edit: I have the message for 19 updates, so I made apt-get update After reboot, all updates are gone and I get the message for the 19 updates again. Regards DoXer

Hi all, everytime I turn on my Nano Pi it will sync the clock using NTP. When network is not enabled it will rewind the time to something that I still can't comprehend. I found lots of topics about people talking about how to add a RTC to the system, but none talking about the current RTC that is recognized by the kernel. Currently when the system is powered off and on (10 seconds distance) without network the time will rewind between 5 and 15 minutes. I understand that this happens because there is no RTC to write the current clock and battery to keep it. But there is obviously a RTC somewhere because removing power from the device and putting it back will keep a wrong b…

Hello community, I'm a Linux enthusiast and I hope I'm reporting in the right place. I have a communication with a device that is behind a VPN, when trying to communicate the system displays the following kernel error below. Can anyone help me? root@brmgbhzfw001-pri:~# ping 192.168.2.1 PING 192.168.2.1 (192.168.2.1): 56 data bytes Message from syslogd@brmgbhzfw001-pri at Apr 20 15:40:36 ... kernel:[ 1975.023502] Internal error: Oops: 5 [#1] SMP THUMB2 Message from syslogd@brmgbhzfw001-pri at Apr 20 15:40:36 ... kernel:[ 1975.439706] Process 1c15000.crypto- (pid: 68, stack limit = 0x3cf3c816) Message from syslogd@brmgbhzfw001-pri at Apr…

Hi, I am using ARMBIAN 5.25 stable Ubuntu 16.04.2 LTS 3.4.113-sun8i on my Nanopi neo air. uname -a says Linux nanopiair 3.4.113-sun8i #10 SMP PREEMPT Thu Feb 23 19:55:00 CET 2017 armv7l armv7l armv7l GNU/Linux I think, since I made the last apt-get upgrade and rebooted, my bluetooth stopped working. lsmod gives: lsmod Module Size Used by bmp085 3487 0 pcf8591 3363 0 snd_usb_audio 80352 0 snd_hwdep 5562 1 snd_usb_audio snd_usbmidi_lib 17545 1 snd_usb_audio snd_rawmidi 17134 1 snd_usbmidi_lib gspca_ov534 9254 0 gspca_main 19688 1 gspca_ov…

Hi again, I've a strange problem again. I've several Lime2 and tested them with USB-Sticks, works fine. Now I got a Fan-Tec case (USB 3.0 DB-ALU3-6G) containing a 4TB-SATA from a customer. As soon as I plug the disk into one of the USB-Plugs of a lime2, I got a kernel panic: Message from syslogd@localhost at Oct 19 17:49:20 ... kernel:[ 460.550693] Internal error: Oops: 17 [#1] PREEMPT SMP ARM Message from syslogd@localhost at Oct 19 17:49:20 ... kernel:[ 461.304238] Process kworker/u:1 (pid: 55, stack limit = 0xee9702f0) Message from syslogd@localhost at Oct 19 17:49:20 ... kernel:[ 461.314387] Stack: (0xee971d78 to 0xee972000) .... Some facts…

I encountered a very strange boot behavior on OrangePI Plus 2E. When I boot from SD card with the desktop Armbian image, I'm having just an input of some color on HDMI (photo attached). No U-boot output on screen, but considering UART output both U-boot and system boot with no errors (log file is attached). Boot with the server Armbian image goes just fine, except no U-boot output on screen (only on UART) and screen resolution is 1280x720, while native resolution for the display is 1920x1080. Until recently everything worked just fine with both desktop and mainline images, and U-boot giving proper output on screen in 10920x1080 resolution. What I tried so far: …

Hello everyone, I've been trying to find a list of the differences between Armbian and a classic Debian Install. Could you please help me with that? I'm asking this question because I currently have Armbian running from an SD card on a Cubieboard 1, and would like to install Debian to an encrypted SATA drive instead. I think I will follow this installation guide with the netboot SD card image. Once I have a Debian for the armhf arch, is there something else I should do to make my system as compatible as possible with the Cubieboard? I know I can reduce the amount of reserved memory assigned to various video devices. I could maybe try to look into the Security …

Hi. I have orange pi pc with armbian installed. I'm powering opi pc with battery, I would like to make something like ups. Some time ago I found solution to monitor battery voltage for raspberry pi wit ADC, exactly mcp3002. It uses script in python. Here is link for this solution: http://raspi.tv/2013/controlled-shutdown-duration-test-of-pi-model-a-with-2-cell-lipo I made prepared everything like is shown on diagram, I'm using breadboard and also mcp3002. With raspberry pi it works with python script from: http://raspi.tv/download/batt_test_raspi.tv.py.gzbut I have a problem with adapt this script with OPi PC. I think, that here is a problem with some libraries, s…

Looking for recommended LCD screens for NanoPi Neo and Orange Pi Zero. I have some IoT ideas I want to explore. Does not have to be touch, and I'm pretty flexible on screen size. Actually, would like a couple of different screen sizes but bigger than an 128x64 OLED (I have that). Must be color. At least 320x240, preferably something 320x480. I just got two Orange Pi Zero systems today and want to create a couple of IoT devices along with the two NanoPi Neo systems I got recently. Performance does NOT have to be ideal, just reasonable (not going to game on it or watch action movies). The Zero means HDMI is not an option; given that, what interface is best - …

Which is the maximum current delivered by the pin 5v of the gpio in an Orange Pi LITE? I would like to connect on it some sensors that needs 5v power supply. Thanks

After flashing the sd card with armbian and booting it, it asks me to enter the root password, however the keyboard that is plugged in isnt detected and nothing is typed on the screen. Ive already tried bookworm and jammy, both cli and minimal-cli variants. It is not a keyboard or usb related issue, i tested it with an older version of armbian and the keyboard still works.

I there i use the update my orange pi zero to latest version 04/05/17 and no simply dosen´t boot anymore! any thing i can do?

Hello, I had a telecommunication technician logged onto my router + later that night a power outage. Now my pi (not sure before or after or related to anything), now the lights go on the pi (both + the one on the network), I can see it on the router with an IP but that is it. I can't logon to it on that IP with Putty nor can I ping it from the console on the PC. I tried now 3-4 of the builds (older ones, one official one and so on) with the flash card, but always the same. I don't have an USB to TTL converter to try that route. Is there anything else I can do? There is no way to do a hard reset, right?

I've got a Sony RX100VA camera that I want to connect to the NanoPi Neo2 running Armbian Buster. On the Camera I can select the type of USB connection: -Auto -Mass Storage -MTP -PC Remote My intention is to use the PC Remote connection for use with gphoto2, this works fine on a PC with Ubuntu 18.04, but when I connect the camera to the Nano Pi Neo2 with Armbian, the camera display shows connecting (but doesn't connect). I suspect a bug in the OS, but I am unsure how to find it. lsusb gives the following report with an error: can't get debug descriptor: Resource temporarily unavailable root@nanopineo2:~# lsusb -d 054c:0cb2 -v…

device: orange pi pc soft: Armbian_5.14_Orangepipc_Debian_jessie_3.4.112.7z my log via serial: U-Boot SPL 2016.05-armbian (Jun 05 2016 - 09:45:23) DRAM: 1024 MiB Trying to boot from MMC1 U-Boot 2016.05-armbian (Jun 05 2016 - 09:45:23 +0200) Allwinner Technology CPU: Allwinner H3 (SUN8I 1680) Model: Xunlong Orange Pi PC I2C: ready DRAM: 1 GiB MMC: SUNXI SD/MMC: 0 (SD), SUNXI SD/MMC: 1 *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: No ethernet found. starting USB... USB0: USB EHCI 1.00 USB1: USB OHCI 1.0 USB2: USB EHCI 1.00 USB3: USB OHCI 1.0 USB4: USB EHCI 1.00 USB5: USB OHCI 1.0 scanning bus 0 fo…

Hi guys, ive installed armbian 5.2 into my opione, now what should i do? Videos 1080p work slowly in kodi, i have to do something? Thanks Inviato dal mio HUAWEI SCL-L21 utilizzando Tapatalk

Hello, I use armbian latest version on a Orange Pi Zero (256Mb) to send data from usb to network. I use Ser2net for this to stream data from a rflink device. To test I use a Metrix bench power supply, so i think power is ok. If I reboot the device with usb plugged the boot fail, so i have to boot without usb plugged and then plug usb and restart ser2net daemon to make it work. I think boot is searching for usb device, is it possible to disable this ? Next the board crash every 2 or 3 days, network stop responding and soc heatsink goes hot. I restart the device and it's good for 2 or 3 days, and crash... If it help armb…

On a fresh download, configuring a CB1, Desktop Vanilla system, I get: U-Boot 2016.05-armbian (Jun 10 2016 - 17:25:48 -0400) Allwinner Technology CPU: Allwinner A10 (SUN4I) Model: Cubietech Cubieboard I2C: ready DRAM: 1 GiB MMC: SUNXI SD/MMC: 0 *** Warning - bad CRC, using default environment HDMI connected: Setting up a 1280x720 hdmi console (overscan 0x0) In: serial Out: vga Err: vga SCSI: SATA link 0 timeout. AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl SATA mode flags: ncq stag pm led clo only pmp pio slum part ccc apst Net: eth0: ethernet@01c0b000 starting USB... USB0: USB EHCI 1.00 USB1: USB OHCI 1.0 USB2: USB EHCI 1.00 USB3: USB OHC…

A speed test on my Laptop shows >300 MBPS download speed. when i run the same test using my orange pi 2e+ on the same ethernet GB switch , I get 50 MbPS download. I disabled wifi. tested the cable.What's going on?

Hi All, I am looking for h3consumption utility to change ddr freq (I want to set ddr and processor as low as possible) Could someone help me ? Best Regards, Boris

I am currently trying to upgrade my kernel from 3.4 to 4.14 and it is working quite well for my needs. But i have a problem i have not found a solution for, i can not set the PE00-11 pins as gpios. Acutally i cant set or configure them at all. I am using the /sys/class... export and writing via echo direction and value. For all other GPIOs it works perfectly fine exept for those 12 (and the IR0-pins PB3 and PB4, those are also not accessible). I tried really a lot already: stripping down the kernel to only the most essential modules, deactivating almost everything in the dts file, using different images... but in essence, as soon as i c…

Using Armbian_20.02.1 with 5.4 kernel on NEO2 board, I'm running into an issue trying to get the USB OTG working with the g_ether module. When I run modprobe g_ether I see the following in dmesg: [ 490.490582] udc-core: couldn't find an available UDC - added [g_ether] to list of pending drivers I've also tried compiling my own img using the Armbian builder but it looks like all the correct OTG options are already selected by default. Any ideas what I'm doing wrong?

sometimes the OrangePi PC freezes and I see the following error in kern.log May 6 11:17:14 orangepipc NetworkManager[554]: <error> [1494058633.9922] platform-linux: do-add-ip4-address[2: 10.45.168.13/24]: failure 17 (File exists) I use static! ip in my OPi and there is no other device using the same ip eth0 Link encap:Ethernet HWaddr 66:9b:7a:fd:fb:59 inet addr:10.45.168.13 Bcast:10.45.168.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:2731 errors:0 dropped:24 overruns:0 frame:0 TX packets:3476 errors:0 dropped:0 overruns:0 carrier:0 …

Can anyone confirm the Orange Pi Zero Plus H5 boards have been discontinued. The boards are no longer sold here: https://www.aliexpress.com/item/32828347476.html

Nano Pi Neo, Armbian (Armbian_5.27.170422_Nanopineo_Ubuntu_xenial_dev_4.10.11) External USB device works fine when connected via USB-A jack, but doesn't work when connected to 2.54 pin header (2,3). Is there some additional steps to activate internal (usb1, usb2) ports, or it's hardware problem?

Hi Guys, I bought one of these pcDuino 4 (Nano Pi M1) boards: http://www.linksprite.com/pcduino4-nano/ Works great with Armbian Legacy Kernal. I got this screen with the HDMI + DSI Driver Board. Works fine with normal PC -> HDMI output but will not work with the Nano Pi.. https://www.alibaba.com/product-detail/LS055R1SX04-1440x2560-5-5-2K-LCD_60672828148.html?spm=a2700.7724838.2017115.1.3c93b095HGc0XS The LCD screen just turns on then off and on and off forever. It never locks on to the HDMI signal. The Nano Pi M1 works just fine with a regular monitor but not with the LCD/Driver combo. I have seen some purple images come up on …

Hi, I've been playing around with a OPi Win+ which is aint bad but full support seems a while off ... I'm looking for a quad core, 2G, good wifi with external antenna and this seems to fit the requirements. I dont care too much about hdmi but if it works all the better. I was just wondering what current owners thought of it. Can the internal wifi do AP mode and will it do dual modes ... hostapd-8188 will create wlan0 & wlan1 so that you both connect to an AP and be an AP. Google doesnt show much about 8189ETV Given that the armbian download shows it with a legacy kernel but stable I expect that everything 'works' ... …

Hello. First of all sorry if this isn't a place to post this. I recently bought an orange pi one. And I'm using Armbian OS. (Latest version downloaded from Armbian website) But there seems to be a problem with WiFi and i searched all over the internet and i didn't found anything about it. So here is how it was: First time that i wrote the Armbian OS on the SD card and configured it (as said by the Armbian website I didn't connected the WiFi dongle) and after doing those stuff I did connected the WiFi dongle to it. It worked fine, but after some mins both LEDs were on. And nothing was working. I did the things I said above many times and the same happend. And once I d…

My Orange Pi Prime freezes when compiling anything major (Ruby, CPython). It completely locks up halfway through. No error or kernel panic from serial either. HDMI output goes black. I've tried: Better cooling, different brand SD cards (Sandisk Ultra, Samsung Evo from reputable suppliers), different power supplies, and even disabling swap. Tried my Lab Bench Power Supply at 5.00, 5.10, 5.20 and 5.35 volt, volt drop is about 0.1 volt measured at the board, and power usage at 400-700mA depending on the load. Tried `stress` in all sorts of configurations for times up to 1 hour, this does not crash the board. Iozone also does not crash the …

Hello, My problem is that curl tries to use ipv6 to resolve DNS entries and my home modem-router doesn't handle ipv6 so curl fails and fallbacks to ipv4. The process lasts 10 to 15 seconds because of this. For example (38s - 23s = 15s to resolve hostname): $ curl -v --trace-time https://api.owncloud.com 15:53:23.053958 * Rebuilt URL to: https://api.owncloud.com/ 15:53:23.055233 * Hostname was NOT found in DNS cache 15:53:38.583565 * Trying 85.25.74.45... 15:53:38.803420 * Connected to api.owncloud.com (85.25.74.45) port 443 (#0) And if I add '-4' option (only a few milliseconds): $ curl -4 -v --trace-time https://api.owncloud.com …

Hello, I want to use for my domotic a USB Everspring sa413 (Z-Wave modem based on ZM5304), but this device is not detected on Armbian with my Orange Pi Zero h2+. https://fccid.io/D87-ZM5304-U/User-Manual/User-Manual-pdf-2052478 Normally, I think this dongle is use like CDC/ACM device but I don't understand what wrong because ACM module is loaded. I use actually Debian Jessie next 4.13016. root@orangepizero:~# lsusb -t /: Bus 08.Port 1: Dev 1, Class=root_hub, Driver=ohci-platform/1p, 12M /: Bus 07.Port 1: Dev 1, Class=root_hub, Driver=ohci-platform/1p, 12M /: Bus 06.Port 1: Dev 1, Class=root_hub, Driver=ohci-pla…

Hi, I tried two builds for my OPI Zero. Armbian_5.35_Orangepizero_Debian_jessie_next_4.13.16.7z Wifi works but no audio. (and instabel ethernet connect) Armbian_5.35_Orangepione_Ubuntu_xenial_default_3.4.113.7z Audio works but no WiFi In witch build works both ?

I have a non compliant usb device that I want to work with my Orange Pi Lite board. I know how to make it work under Arch linux. For that I need to edit source for the usb generic hid driver (kernel/drivers/hid/hid-core.c), recompile the usb kernel module and reinstall it to intramfs (mkinitcpio -p linux). To recompile kernel module I followed this guide: https://wiki.archlinux.org/index.php/Compile_kernel_module What procedure do I need to follow under Armbian? One way is to set up a development environment on a PC, with Virtual Box running Ubuntu Xenial, etc. Recompile the whole armbian and copy the compiled kernel module over to Orange Pi Lite. But it take…

Below are supplementary quotes helpful to asking the question: can CPU presets be made into a desktop shortcut that could allow pre-defined CPU freq settings whether onthe fly or even reboot required? Is so, what would the code be? That's the question I can't answer. I ask because of the two Beelink X2s (one each of Armbian flavors); I'd like to get a hands-on feel for how high the temps can be expected to go. I probably won't be running hot for long, but then again I just received a bag of heat sinks and can also drill holes in the plastic box for better air circulation. QUOTE 1 for reference: Some boards allow to adjust CPU speed. nano…

Hi guys, its the first time im gonna post here so bear with me, i am a recent user of orange pi zero 3, one with 4GB RAM and i have been able to run the latest community release on it, things work besides audio thru hdmi, but i have noticed that the video encoding and decoding is not working, albeit 3d acceleration works thru panfrost and Mesa. I have been digging this topic and i wanted to share what i found and maybe validate if im right or perhaps i am not getting this well. 1. Video encoding and decoding in G31-MP2 is something separated from what Mesa and panfrost would do, so even if those work i cant get video acceleration with h.264 etc. …

Maybe a discussed problem. Using Armbian Jessie on Banana Pi M1. Using USB keyboard and Mouse. Can use usb wifi adapter but presently unused. Power supply standard PS for Banana Pi normal output from lsusb and lsusb -t But it won't read files from usb key. Why ? can you help?

I've been trying to get the TV out from my OPI-PC Plus for a while, but nothing is working The pre-installed Android OS on the emmc outputs to the TV just fine, so it's not a cable/tv problem I've tried both Armbian and some distros found on the OPI forums, but nothing worked. I messed with the script.bin, using http://linux-sunxi.org/Fex_Guide as a guide, but it didn't work I'm using a 64GB Samsung Class 10 card, but I've also tried other cards and it didn't work It works when using HDMI though Here's my script.bin (I'm pasting only the relevant part) I'm running the lastest version of armbian (5.20) What should I do now?

Hi: I have an olimex-mirco A2O board. I have already run A20-OLinuXino-MICRO Debian Jessie with kernel 3.4.103+ release 12 on it, and everyting is ok. I use the HDMI screen, because the kernel sets vedio output is HDMI 720p by default. when running , i can see the debian GUI in the screen. After that, I got the Armbian_5.20_Micro_Debian_jessie_3.4.112.iso, and dd the image into the SD card. The board can work. I can login into Debian by ssh. In boot procedure, I can see the boot information on the HDMI screen, but after boot finished, the hdmi screen only display blue. Because the kernel does not output signal to HDMI interface. I input the command by SSH t…

Im in the progress of making an internet radio with an Orange Pi Zero plus using armbian. Ive just gone to enable the audio device in armbian-config and when i go though to system -> hardware, the list is completely blank with just tick boxes but no content Any ideas? thanks

Hi, Thank you very much for all the work. I recently purchased 4GB RAM version of Orange PI RK3399. Was able to install armbian WIP version: 4.4.180-rk3399 I'm trying to capture video via HDMI IN port using gstreamer but I see the following error messages in kernel log, Spoiler Jun 12 03:19:37 localhost kernel: [ 3.956986] tc358749xbg 1-000f: probing... Jun 12 03:19:37 localhost kernel: [ 3.957006] tc358749xbg 1-000f: GPIO lookup for consumer int Jun 12 03:19:37 localhost kernel: [ 3.957016] tc358749xbg 1-000f: using device tree for GPIO lookup Jun 12 03:19:37 localhost kernel: [ 3.957101] tc…

Hi all, I bought this ethernet: The idea is connect to the SPI, but not sure what pines i must to connect... i follow this: Raspi.tv So i connect the pines, exactly like there say, but he connect on the UART not in the SPI :S (have 2 pines more, but the pines that he conenct i have in my ethernet board) So i connect to the gpio of my board and well turn on! yeah! xD: If i fo ifconfig i see this: root@bananapim2:~# ifconfig bond0 Link encap:Ethernet HWaddr 7e:99:6b:7c:04:39 UP BROADCAST MASTER MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 drop…

Is there any way to change brightness settings on CAM500B? I can't get clear images fswebcam. Using nanopi neo air with CAM500B and Ubuntu core. :~# v4l2-ctl -l error 25 getting ctrl White Balance, Automatic error 25 getting ctrl Exposure error 25 getting ctrl Horizontal Flip error 25 getting ctrl Vertical Flip error 25 getting ctrl Color Effects Thanks

Hello, I have a Cubieboard2 and armbian in a vanilla kernel with jessie flavor. This board has a 2 cores processor. When I am logging in, load average is shown and becomes red when it is greater than 1.0. Since, there are 2 cores, it should be colorized only when it reaches 2.0. Is it possible to have this feature (taking care of each board's number of cores) ? Thank you

I have installed Armbian_5.38_Nanopineo2_Debian_stretch_next_4.14.14.7z on NanoPINeo Core2 H5. Welcome to ARMBIAN 5.38 stable Debian GNU/Linux 9 (stretch) 4.14.0 uname -a Linux ntp169992 4.14.0 #25 SMP Fri May 11 16:57:53 CST 2018 aarch64 GNU/Linux ls /lib/modules 4.14.18-sunxi64 lsmod Module Size Used by No modules are loaded modprobe tun modprobe: ERROR: ../libkmod/libkmod.c:586 kmod_search_moddep() could not open moddep file '/lib/modules/4.14.0/modules.dep.bin' modprobe: FATAL: Module tun not found in directory /lib/modules/4.14.0 It seems t…

After the latest kernel update I don't have wired connection on my Orange pi+2. I have a fix IP address and it worked well until the update. ping -c 100 8.8.8.8 shows 100 % packet loss What cause the problem?

Hi Everyone. I intend to use this sbc with a hdmi to lcd controller (not yet arrived). I noticed the predefined resolutions do not include 1366x768. I tested on a smart tv and I with the closest resolution of 1360x768, there was a vertical purple line on the left. I could probably live with the slightly lower resolution, however if the purple line appears on my final setup, how do I remove this or is there anyway to run the full 1366x768? I have tried 1280x720 in windows and it blurs the text so that seems to be out of the questions for me. Regards, Rauli

Hi, Armbian gurus, I'm trying to make the build system to build image with LibreELEC kernel tree for PineH64 I heard the kernel is patched for being better at hardware decoding Here are what I have done in order: 1. Retrieve patched kernel tree from LibreELEC build system. Upload the patched kernel tree to my gitlab account. 2. Modify config/sources/families/include/sunxi64_common.inc to make KERNEL_SOURCE = my previous repo; KERNELBRACH = master. To make it fetchable during bilding. 3. Modify lib/compilation-prepare.sh: skip aufs patch. 4. Modify lib/compilation.sh: skip advanced_patch in compile_kernel() After all th…

Hello, I have just bought a bananaPro. I would like to learn a little by installing armbian and enabling the video acceleration. Currently, I have no LCD display, so I would start to install Debian Wheezy or Debian Jessie (legacy) so that to be able to log in through ssh. Nevertheless, on the download page for bananaPro it is said that "Mali drivers fails to compile". Is this driver mandatory for video acceleration to work ? I figured out it was rather related to cedarX. Then, which armbian image is best suited ? Thanks in advance for some piece of advice. Best regards deb2016

Hi Armbians I am running mulitiple TOR network relays on Cubietruck boards (Cubieboard 3) in different Datacenters with synchronous 100 MBit/s internet connection each board (by ethernet plug) for 1- 1,5 years now. At the beginning each board could handle 25 MBit/s incomming and outgoing traffic the same time easy and 24/7. The boards are running the latest Armbian build with kernel headers installed and full firmware package. But now, as you can see here, my Cubietrucks are getting slower after time, with the network traffic they can handle via eth0: https://metrics.torproject.org/rs.html#details/EC9C4CDB403204731122C9D3FA44DFAE6…

Hi everybody I'm using Orange PI One with OS Armbian Debian GNU/Linux 8 (jessie) 3.4.112-sun8i (Server) I need to convert some videos for make video stream(H264) but it works so slowy(3~10 fps) when I use ffmpeg. I think ffmpeg works slowly because it doesn't use HW Codec so how can I enable it in H3 CPU and use it in ffmpeg?

I have a NanoPi Neo Air (Allwinner H3 SoC) with onboard wifi and a serial interface. Unfortunately during some late hour hacking I managed to accidentally connect 5V onto its TX pin, I think effectively screwing up its UART0. I can no longer connect to it via a USB to TTL Serial cable. Looking at the NeoPi Nano Air's pinout diagram, it seems to have more UART devices (UART1 and UART2 even) so I wonder whether there's a way to set up armbian to communicate via these during boot? Another idea I had was to try to bypass the UART completely and to hook up the board via the wifi. Now, without having any access to a serial console, I need to …

Hi, How to enable i2c on PI8(SDA) and PI7(SCL)? I'm newbie in linux and not really understand what am I actually doing so I tried to make it with chatgpt but still not working. root@orangepizero2w:/# sudo i2cdetect -y 0 0 1 2 3 4 5 6 7 8 9 a b c d e f 00: -- -- -- -- -- -- -- -- 10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 30: -- -- -- -- -- -- UU -- -- -- -- -- -- -- -- -- 40: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 50: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 60: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 70: -- -- -- -- -- -- …

Hello all, I setup an orangepi plus2 with Armbian_22.08.2_Orangepiplus_bullseye_current_5.15.69.img I follow tuto and it worked with boot on SD card. I run nand-sata-install Then, I reboot. I was in safe mode and try format emmc Then I reboot again Since, I have only green light. I connect to COM port and see that : U-Boot 2022.07-armbian (Sep 21 2022 - 18:37:27 +0000) Allwinner Technology CPU: Allwinner H3 (SUN8I 1680) Model: Xunlong Orange Pi Plus / Plus 2 DRAM: 2 GiB Core: 65 devices, 18 uclasses, devicetree: separate WDT: Not starting watchdog@1c20ca0 MMC: mmc@1c0f000: 0, mmc@1c10000: 2, mmc@1c11000: 1 Loading…

The eth0 device does not work when using 6.1.47-current-sunxi64 and 6.12.20-current-sunxi64 kernels. There will be the following errors in the kernel log. pi@orangepi3:~$ dmesg | grep eth0 [ 16.997431] dwmac-sun8i 5020000.ethernet eth0: Register MEM_TYPE_PAGE_POOL RxQ-0 [ 16.998219] dwmac-sun8i 5020000.ethernet eth0: __stmmac_open: Cannot attach to PHY (error: -19) [ 19.284111] dwmac-sun8i 5020000.ethernet eth0: Register MEM_TYPE_PAGE_POOL RxQ-0 [ 19.284754] dwmac-sun8i 5020000.ethernet eth0: __stmmac_open: Cannot attach to PHY (error: -19) [ 19.308140] dwmac-sun8i 5020000.ethernet eth0: Register MEM_TYPE_PAGE_POOL RxQ-0 [ 19.308738] dwmac…

Hi there, Armbian with 3.4.x Kernel has been running fine on my CubieTruck until upgrading to 5.25. Armbian is installed on NAND (using nand-sata-install), and there is also a SDcard and a harddrive connected for data storage. Some days ago the upgrade to Armbian 5.25 appeared and I did a sudo apt-get dist-upgrade. It took a long time and threw some warnings and errors - which I probably should have captured. I recall something regarding "cannot link image" or so... The whole upgrade finished completely at the end. Then the reboot... Now the the CubieTruck is not booting anymore. The error message is: U-Boot 2017.1-armbian ... ... Error: no valid bm…

OrangePi plus2e how do I get hardware acceleration to work in smplayer? I am recording tv using tvheadend and trying to play back using smplayer. I have tried the available options for video output driver and X11 (slow) is by far the best but is not useable as there is still alot of stuttering. top shows 138% mpv usage vdpau is colored almost horizontal lines All help is appreciated Dave

Hi All, I'll start with I know this is a dev image...... but I would like to see the 4.x kernels working on the Orange Pi Lite, so would like to be able to find out why it's not and help get that resolved in any way I can. I have 2 images, both were built using the compile.sh: Armbian_5.20_Orangepilite_Ubuntu_xenial_3.4.112.img Armbian_5.21_Orangepilite_Ubuntu_xenial_4.7.6.img I dd'd the 3.4.112 kernel image onto a Micro SD, put it in to my Orange Pi Lite and booted it up and confirmed it was working as expected, the green light flashed, the red one also flashed on first boot, then after the reboot I logged in, changed password etc. I then powered off th…

Hello, my name is Wolfgang and I´m from Germany and hope you can maybe help me. First I have no knowledge related to the nano PIs. I bought an R2D2 from Deagostini. The R2 has a board which looks like an nano PI air. It´s called DRCC H3 V2.0. The R2 has different sounds and video seqeunces which can be played by R2. My quetsion is now do you think it´s possible to change or add sounds to the board? Thanks in advance Wolfgang

Hi, we have found an issue with Armbian 5.31 on a Banana Pi M2+ board that occurs when IP forwarding is enabled and there is high network load. How to reproduce this issue: Enable IP forwarding on the M2+: sysctl -w net.ipv4.ip_forward=1 Install nginx or another web server on the M2+ Use ncat to send a large file (e.g. 4 GB) from one host to another via the M2+ Use ab to create additional load on the nginx server Soon there will be a kernel panic, for example (see attachment for more examples): Spoiler [ 169.520266] Unable to handle kernel NULL pointer dereference at virtual address 00000004 [ 1…

There is a patched version that enables noscan=1 , but the one I'm using seems like it hasn't been patched. When there is no AP's around HT40 kicks in ok without noscan=1. With noscan=1 and AP's are around hostapd won't even start in HT20 mode. Any help? root@orangepilite2:~# modinfo 88x2bu|grep version: version: v5.8.7.1_35809.20191129_COEX20191120-7777 srcversion: 43C721C4A870A632EBDE0B5 parm: rtw_chip_version:int root@orangepilite2:~# uname -a && hostapd -v Linux orangepilite2 5.4.43-sunxi64 #20.05.2 SMP Tue Jun 2 17:20:17 CEST 2020 aarch64 GNU/Linux hostapd v2.9 User space daemon for IEEE 802.11 AP management, IEEE 802.…

Hi, I need to use the GPIO of the orange pi, is there a library that i can use to program my aplications in java or python? Is pi4j an good option? Can i use it with orange pi plus 2?

I am using Orange Pi Zero Plus(http://www.orangepi.org/OrangePiZeroPlus/), but there's no armbian for it. I download armbian for Orange Pi PC2(here) and it works! However, PC2 does not have on-board wifi, so my zero plus cannot find a wlan device. The onboard wifi of zero plus is Realtek RTL8189FTV, and the driver source seems to be this I compile it on my orange pi and add "modprobe mac80211" before "insmod", it is loaded but there is still no wlan0 device So what should I do to enable wifi?

Hello Armbian users ! I use "ARMBIAN Debian GNU/Linux 8 (jessie) 3.4.112-sun8i" installed on EMMC and Orange Pi Plus 2e . Can you explain two things about Armbian ? My image is: Armbian_5.14_Orangepiplus2e_Debian_jessie_3.4.112 1. Why do I have max CPU clocked at 1296.0000 Mhz ? I read the Orange Pi Plus 2e have Quad Core 1,6 Ghz, right ? shell> /usr/bin/cpufreq-set -d 912MHz -u 1600MHz -g on demand # does not work . 2. My Armbian is installed on eMMC 16gb, I use very good script writer by Igor Pecovnik . How can I boot orangepi with on eMMC and with a second SD card ( for samba ) ? Partition: 1. /dev/mmcblk0p1 - boot - Armbian on eM…

Hey guys, I was wondering why the Browsers doesnt support H/W Acceleration, now i found out its because the Mali Driver is outdated. I installed also Chromium and forced it to use the GPU, well at least it trys but i got a bunch of errors. Is there a way to add a new Driver? Tried also to compile it myself but i was never that deep into linux and never had to compile drivers, here are the sources: http://malideveloper.arm.com/resources/drivers/open-source-mali-utgard-gpu-linux-kernel-drivers/ I think the current Kernel uses a horrible outdated r3p0 Version and a new one is r7p0, at least r4p0 is needed which should work with Chromium and finally add H/W Accelerat…

Hi I'm trying to understand how to enable Uart 2 for serial communication with a mcu on the banana pi (trying to connect a board running klipper to it). I connected the Uart of the board to CON1-P08 and CON1-P10 of the Banana PI M3 according to all i can find those pins are tx/rx for UART2. So far i figured out that the UART should be one of the /dev/ttyS* ones if i'm not mistaken, I can see /dev/ttyS to /dev/ttyS7 but am missing the /dev/ttyS1 user@bananapim3:~$ ls /dev/tty* /dev/tty /dev/tty11 /dev/tty15 /dev/tty19 /dev/tty22 /dev/tty26 /dev/tty3 /dev/tty33 /dev/tty37 /dev/tty40 /dev/tty44 /dev/tty48 /dev/tty51 …

Hi, I could not able to download and install any packages, following is the eg. i was trying to install dkms package sudo apt install dkms Reading package lists... Done Building dependency tree Reading state information... Done E: Unable to locate package dkms in addtion apt update is running partial , throwing errors as below sudo apt update Get:2 http://ports.ubuntu.com bionic InRelease [242 kB] Hit:3 http://repository.olimex.com bionic InRelease Get:2 http://ports.ubuntu.com bionic InRelease [242 kB] Err:1 https://apt.armbian.com bionic InRelease Could not wait for server fd - select (11: Resour…

Hello, for my BananaPi I recently downloaded "Armbian_21.05.1_Bananapi_buster_current_5.10.34.img" and did not get the on-board CAN controller working with this image. I found out that in sun7i-a20-bananapi.dtb (uses sun7i-a20.dtsi) the group name for the CAN pins PH20 and PH21 has changed from "can0_pins_a" to "can_ph_pins" but in the sun7i-a20-can overlay this change had not been done accordingly, and the DT merging failed. So changing "sun7i-a20-can.dts" to: /dts-v1/; /plugin/; / { compatible = "allwinner,sun7i-a20"; fragment@0 { target = <&can0>; __overlay__ { pinctrl-names = "default"; pinctrl-0 = <&can_…

Hi, Nanopi M1 is so similar to Orange Pi One that you can use the amazing work provided by jernejsk and run Openelec using the VPU of the H3. Here are the links : * Main page * prebuilt images list * Github project * The issue I've opened I'm using the embedded IR Sensor with my remote (that was the toughest part) and the only modification I made was to change to cpufreq governor from performance to conservative but if you use the latest image you shouldn't have to do that. Well so far so good. I'm using a little heat sink and the cpu temperature is between 60°C and 80°C depending of the video I'm playing.

Hi everyone, I bought an Orange Pi oneas a cheap replacement for the unobtainable Raspberry Pi Zero for a little Emulation project. Right now I don't know if it was the right decision:) I wanted to add a waveshare 3.5" display to the orange pi, but I don't even get there. I downloaded the armbian distribution v5.10 legacy Jessy desktop. After the start of the desktop, icons, the taskbar and open windows disappear at random, icons return but the taskbar does not, The desktop is unusable. A similar problem happens in the console, I don't see the cursor where I'm typing. On the command line, thats acceptable but using an editor like nano I have no idea where I am. …

Hi! I have a Hackberry and i've tried to install Debian jessie for Cubieboard. First I have installed a legacy version; hackberry boot up correctly but my keyboard don't work so i have replaced script.bin and overwrited u-boot-sunxi-with-spl.bin with the latest version (http://dl.linux-sunxi.org/nightly/u-boot-sunxi/u-boot-sunxi/u-boot-sunxi-latest/) and it's work. Then i've try to use Vanilla version. As the same, hackberry boot up correctly but my keyboard don't work. I've tried to recompile boot.cmd with correct dtb but nothing changed. Then i've tried to create uImage from zImage (linked to vmlinuz-4.2.3-sunxi) and overwrite u-boot.bin with the latest (…

hi, I made a program on Orange pi minus (kernel 3.X)using wpa_supplicant for wifi direct. That worked fine (basically). But i have been asked to do it on Orange pi plus with Kernel 4.9. The wifi works when i using nmtui, but when i made a iw list i couldn't find my material and i am not able to configure P2P. I think the problem is the kernel version and not the Hardware because my card with kernel 3.X works on orange pi pc plus. So i am a bit lost, what can i do ? My guest is to modify the realtek module ? I am not sure if i am on the right direction... Thanks, Ps: Sorry for my english.