Allwinner sunxi

Before installing this Armbian legacy kernel (3.4.109), I was using a Bananian-based image with OpenMediaVault (the so called BanaNAS image) and was getting regular 30MB/s transfer rates to my Samba shared hard drives (USB and SATA). My PC and Banana are connected through a gigabit switch, and working at 1Gbps. After installing and configuring the new Armbian image, I notice my transfer rates were now around ~23MB/s which was odd. After trying to change some smb.conf parameters and getting nowhere, I decided to test just the network performance by setting up a simple web server on my PC and doing a wget -O /dev/null http://<my PC-IP>/test.zip of 3Gb. The values …

Hello, I just upgraded my system from 3.4.110 to the kernel 4.4.1 (Debian7) by Igor's script (Thanks Igor). But I have noticed that in this version of the kernel is no longer possible to set the green light to the disk activity. Is there a way, patch or other to fix it? Thanks Fred

My Cubieboard 2 absolutely refuses to boot from microSD. It will boot into Android from flash when there is no microSD card inserted, but with a card in, it just produces a single red LED and no video output. Eventually it will respond by flashing green and powering down when the power button is depressed, so I feel like it's getting somewhere, but those are the only signs of life. I don't know how to look at serial output from this machine. I've tried two different power supplies, and two different monitors because one had I think been dodgy with this machine before. Same problem on all permutations. I also tested the SD card with F3 and wrote it with Etcher, and I've us…

Hi, I've recently got a ZeroPi from FriendlyElec and I immediately installed Armbian Buster, so far is working great except for a minor issue with the Gigabit ethernet. I'm planning to use it with Wireguard as server so I've made some performance checks first to test the actual network speed with iperf3. What I discovered surprised me, the network throughput in upload from the ZeroPi is fine (900 to 950 Mbps) but the download seems to be limited to ~380 Mbps. ------------------------------------------------------- # UPLOAD TEST (ZEROPI ---> HOST) # $ iperf3 -c XX.XX.XX.XX ------------------------------------------------------- [ ID] Interval …

Hello, actually i have "Bananian" with the kernel "3.4.113-bananian", and I would like to switch to the Armbian mainline kernel! My problem / question is how does it work with the GPIO in the mainline kernel? I use these commands under the legacy kernel... (I use the modified WiringPI from LeMaker) echo "17" > /sys/class/gpio/export echo "out" > /sys/class/gpio/gpio17/direction echo "1" > /sys/class/gpio17/value But these unfortunately no longer work under the mainline kernel! I don't understand how i calculate now the right GPIO Pin. (http://linux-sunxi.org/GPIO#Accessing_the_GPIO_pins_through_sysfs_with_mainline_k…

System: armbian, BananaPi Pro, sd card, sata ssd, usb hdd I manually moved my existing armbian system from sd card to a sata ssd. Then I changed the rootdev in armbianEnv.txt to the ssd´s UUID. After reboot I thought everything was ok. Then after a system update I figured out that the kernel version differs from the installed kernel modules. I think the new kernel and the modules are installed in /boot at /dev/sda whereas the kernel still boots from /dev/mmcblk0p1. How can I fix this? Here some information: root@pi-nas:/mnt/boot# lsblk NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT sda …

hi all . i try clone sd card on running orange pi (cone 32GB to 16GB). original sd is 32GB , clone sd is 16GB . 1) insert USB sd converter ( 16GB sd is in ). this is recognized as sdb because i alredy attach USB HDD. 2) i alredy install boot loader into sdb (16GB). see -> http://forum.armbian.com/index.php/topic/897-backup-restore/ so mkfs.ext4 /dev/sdb1 3)mount /dev/sdb1 /mb1 and run the next shell script ---------------------------------------- cd /mb1 df pwd cp --archive /bin /etc /home /lib /opt /root /run /sbin /srv /tmp /usr /var /selinux /boot /media ./ mkdir -p boot dev sys mnt proc 4) then halt , and repl…

I want to install debian or armbian or what ever it is for Orange Pi One to be a server. I downloaded Jessie server from here: http://www.armbian.com/orange-pi-one/and extracted the 7z file. I do now know what to do with the raw-files I extracted. At first I tried to install install basic Debian from here: http://www.orangepi.org/orangepibbsen/forum.php?mod=viewthread&tid=342&extra=page%3D1 but I didn't undestand the instructions after mounting SD Card FAT partition. I'm not even sure am I suppose to mount it to Orange Pi or the PC I used to write the image to th SD. So I went looking for another way and found the first mentioned which was seemed to be made …

I just booted up a fresh install of Armbian 5.24 (Armbian_5.24.161128_Orangepizero_Ubuntu_xenial_3.4.113) on my Orange Pi Zero and I can't seem to get IPv6 working. It worked fine on Armbian 5.22. It's like the dhclient command isn't able to set the address or the address is silently getting dropped or something. Setting ipv6 address via dhclient fails for both eth0 and wlan0. I ran dhclient by hand to see if a problem would be listed in the output but there's nothing: root@orangepizero:/var/lib/NetworkManager# /sbin/dhclient -d -v -6 -N -sf /usr/lib/NetworkManager/nm-dhcp-helper -pf /var/run/dhclient6-wlan0.pid -lf /var/lib/NetworkManager/dhclient6-1cfb9f48-cd01-41…

Can you power an Orange Pi Zero or Orange Pi One from the 26/40 pin header ? I am pretty sure the answer is yes as the OPI Zero expansion board has a power jack. But is there any information regarding how to do this ? Do you feed the +5v or the +3.3v Is it the same for all of the RPI compatible headers ?

Ping too high(OrangePi Zero) Armbian_5.25 What could be the problem?

Hello! Has anyone succeeded in using the OPi Zero's Expansion Board audio output jack? I can't seem to get any sound out of it. Any help with the configuration would be appreciated. Thanks

Hi I am trying to set up auto-login with enable desktop, using armbian-config as user root, and getting 'killed' once I select which under-priviledged user to enable. (There's two to choose from, and both behave the same with the same error reult). I couldn't find a known issue, please help! OPi Zero LTS 512MB / Armbian from armbian.com Sam

Hello, I have a fully working customized Armbian on OrangePi PC Plus. There are two partitions, one for the rootfs, second mounted as /home I want to convert the root partition to squashfs, and use the squashfs file to boot from. I already converted the root partition to squashfs file, I can mount squashfs file, and the contents are correct. I even tried to mount it via fstab and it works. I searched everywhere, obviosly not enough, but I cannot find a way to boot directly from the squashfs file. The idea is to have only squashfs file and rw partition for /home Please, can somebody help me, or point me to the right instructions ?

If I put a USB stick in I can see it in Nautilus(yes I installed nautilus) but when I click on the name of the USB , I get.. " Unable to access “USBNAME" Not authorized to perform operation (polkit authority not available and caller is not uid 0)" Everything else is working. I have Samba, SSH, x11vnc, NAS, HEVC x265 Video, all working happily.I can live without USB but I thought it would be important to give the Armbian developers feedback. I have looked for an answer and I do not see any one else having this problem. Once again I just love this Armbian / OPi.pc combination. Seasalt

Hello all, i can't see Banana Pi M1 on the available downloads on Armbian site where can i find it? if that exists of couse. Thanks

hallo, for bananapim2 i can build jammy legacy and current, cli and xfce, on my pc-ubuntu-jammy. I just coppy bananapim2.eos to bananapim2.conf, removed box86 files while my pc-ubuntu-jammy seems have problems with build-script to download addition softaware from some git or ppa. Current-jammy goes off on boot on "starting kernel", but if i build with linux-sunxi-legacy.config renamed to linux-sunxi-current.config, boot is successful. On all builds i cannt becomme LAN over eth0, but wifi is ok. I can see eth0 and wlan on Networkmanager(cli too) and ifconfig. I tryed to disable all broadcom drivers i knew thru blacklisting, but wifi is working. Configuring NetworkManager a…

Hi after half a year using orangepi PC have upgraded system and it hangs when compiling headers.... After that have to reformat sd card and installed last version of armbian and the problem still remain when try to upgrade it... fresh system... đ then apt-get update root@orangepipc:~# clear root@orangepipc:~# apt-get update Hit:1 http://ports.ubuntu.com xenial InRelease Get:2 http://ports.ubuntu.com xenial-security InRelease [102 kB] Get:3 http://ports.ubuntu.com xenial-updates InRelease [102 kB] Get:4 http://apt.armbian.com xenial InRelease [14.1 kB] Get:5 http://ports.ubuntu.com xenial-b…

Good day friends! I have Orange Pi PC and I decided to try Armbian. Excellent build! My congratulations to the developers Before, I used the image of 'loboris'. I had a problem with the management of the LED in Armbian. How to make u-boot turn red led to the kernel boot? Edit fex file no avail

Hello everyone, I have an Orange Pi Lite and I have a problem when I try to shut down the system, I receive stack errors. I've recorded a video to see if it detects what the problem is, I'm new to armbian and linux in general. Except for a bug that occurs in the partition several times (on two different microsd cards), I do not know what the problem might be, I read that it could be a kernel bug, but I'm not sure. I put the video link to see if anyone can help me, it is slowed down so it can be read. If I do not try to turn it off, everything works fine, but when I try to turn it off, it gives the errors and restarts as seen in the video. ​Thanks in advance. …

Hi! I am trying to use Armbian 23.5 Jammy XFCE for new Orange Pi Zero Plus 2. I have TTL-USB connection through Serial port. In pyutty window i see log U-Boot SPL 2022.07-armbian (May 27 2023 - 19:28:04 +0000) DRAM: 512 MiB Trying to boot from MMC1 U-Boot 2022.07-armbian (May 27 2023 - 19:28:04 +0000) Allwinner Technology CPU: Allwinner H3 (SUN8I 1680) Model: Xunlong Orange Pi Zero Plus 2 DRAM: 512 MiB Core: 65 devices, 18 uclasses, devicetree: separate WDT: Not starting watchdog@1c20ca0 MMC: mmc@1c0f000: 0, mmc@1c10000: 2, mmc@1c11000: 1 Loading Environment from FAT... Unable to use mmc 0:1... In: serial Out: serial Err: serial Net: …

Hello I am a Armbian user in the past 3 or 4 years on a Cubietruck running a headless server in my home. Great machine!!! One of the services that i use is a TVheadend server on cubietruck since wheezy version. But from now and from a couples releases ago, my tvheadend clients the image are it artefacts green on screen. My Armbian version now is stable stretch, and tvheadend server is 4.2. I think this is a kernel problem but i don´t no how to fix. It is possible to downgrade to the 3.4 stable kernel on stretch ? If i remenber in the Armbian wheezy or first jessie releases i don´t have this problem and all the h…

Hello, I have what I hope is a simple question, but I haven't been able to find an answer. - Orange Pi Plus2e - Debian Jessie Linux is only booting to a console prompt. I can log in, browse around which is great but I would like to explore the GUI. As I understand there are some screen resolution issues, however I do see the Arbian spash screen which looks like rendered video. Also, I'm seeing that H2/H3 Allwinner part design is missing a lot of multimedia/video support eg. Mali drivers. I liked the fact the Orange pi had 2G memory and embedded flash, but OS support is lacking (not complaining, just observation). Are broadcom…

Hi all, Successfully Installed Armbian_20.02.1_Nanopineo2black_buster_current_5.4.20.img on a NanoPi Neo2 Black using an SD Card. The board is fitted with a 16GB eMMC card via the optional adapter. Ran apt-update && apt-upgrade && armbian-config (“Install” “Install to/update boot loader” -> Install/Update the bootloader on SD/eMMC" - that was the only option available.) Proceeded with 'nand-sata-install' only to be presented with the same 'Install/Update the bootloader on SD/eMMC' and nothing else. Poked about, no mention of the eMMC card during boot (via dmesg) and no '/dev/mmbblk1' - which I thought mig…

Hello, I'm trying the currently offered Armbian Bookworm images for the Orange Pi Prime, using kernels 6.1.30 and 6.2.16, and notice that there is no support for SoC temperature monitoring, neither in armbianmonitor, nor in /sys/devices/virtual/thermal/. Here is the debug info from 6.2.16: https://paste.armbian.com/cetovulubu Is that a known issue? An older Armbian image that I have downloaded previously, using the kernel 5.15.93, shows the temperature just fine.

First, I have installed latest Armbian 23.8 Bookworm CLI, boot works fine, I can login Then, I have installed wireguard. As a dependency, wireguard install linux-image-6.1.0-12-rt-armmp After reboot device is unavailable in network (orange LAN LED blinking while green does not, I assume ethternet broken with this kernel)

Alright so I am trying to use this OLED display: https://www.amazon.com/AITRIP-Display-SSD1306-3-3V-5V-Arduino/dp/B08JPYJ35Y?th=1 with Armbian(minimal) on my orange pi zero 2w, but I just cant get the i2c1 bus to detect it. Here's some more details: uname -r returns: 6.12.23-current-sunxi64 cat /boot/armbianEnv.txt returns: verbosity=1 bootlogo=false console=both disp_mode=1920x1080p60 overlay_prefix=sun50i-h616 rootdev=UUID=adb61282-df86-4116-9688-e94c56913687 rootfstype=ext4 overlays=i2c0-pi i2c1-pi param_i2c1_pin_sda=3 param_i2c1_pin_scl=5 user_overlays= usbstoragequirks=0x2537:0x1066:u,0x2537:0x1068:u sudo i…

Dear All, I am beginner to linux and Opi Zero. I have written some programs on OPI Zero with WiringOP-Zero library. I got all of them working. Right now I am stuck on graphic library. I need to make a graphic library based program. I am going to draw some vertex data and update them according to received data on serial port. I don't have any idea where to start. I used C# and XNA in the past. I know something about game programming. ( Please note, I did not make a game, I made a program which draws some information visually on screen with XNA framework) Could you please suggest me, Where should I start? I have two board. I…

orange pi zero uboot eth have only 10baseT, HDX => mii info PHY 0x00: OUI = 0x50005, Model = 0x00, Rev = 0x00, 10baseT, HDX PHY 0x01: OUI = 0x50000, Model = 0x00, Rev = 0x00, 10baseT, HDX any way change to 100 full duplex at boot time because tftp work fine but slooow after linux kernel starded normal 100 full duplex eth

I have an orange pi 2e running armbian, after using armbian-config to switch to the mainline kernel, my board wont boot ( no display output ) I tried running armbian with a new image on a SD card but the board wont turn on ( also no display ) any ideas?

What module should I load to get SPI working on 4.x kernel image? My usual suspect spi_bcm2708 is not available. I once used it on Banana Pi M2 from other manufacturer (SinoVOIP?) with Raspbian, now on Banana Pro I'm stuck with not working SPI.

Hello, I'm using Armbian 5.20 on my Orange Pi. Everything is working as it should except for the subtitles in MPV. I already upgraded to a newer version of MPV VDPAU which makes no difference so i went back to the orignal MPV and VDPAU. The problem is that at intermittent times the subtiles display over each other. It seems that the first subtitle which should have been gone according to the srt is still being displayed under the newly displayed subtitle. Have anyone encountered this problen and is there a solution to this problem?

Hi, I have a mainline installation of Armbian (Debian) on my banana pi on which I want to control a display from within java. Version of the kernel: Linux bananapi 4.11.6-sunxi #6 SMP Fri Jun 23 19:56:18 CEST 2017 armv7l GNU/Linux The connections I use are as followed: LCD Python lib PI4J WR 23 4 RD N.U. N.U. DC 24 5 CS N.U. N.U. RESET 25 6 …

Hi All , i just tried stretch and buster there is a problem with PA10 configured "IN" problem seems to be on kernel > 4 old method for GPIO works perfectly , i have read that FEX is no longer availlable on 4.X kernel . PA10 il also used by SPI ( pin 1) . SPI is not enable on /boot/ArmbianEnv.txt. this script works perfectly on 3.x kernel but crashed GPIO 10 and GPIO 7 on 4.x kernel , when PA10 configured in "INPUT" and receive a +3.3V it crashed and seems to stay up indefinitively nothink on logs , PA7 can't become up in OUT mode i think there is a problem with SPI and GPIO on 4.X kernel I can't change GPIO pin on my pr…

I'm using Armbian 23.02 Bullseye CLI. I didn't want the HDMI to show the boot system log and TTY1 login screen. According to the armbian documentation, I changed "console=both" to "console=serial" in /boot/armbianEnv.txt. I checked /boot/boot.cmd related to console, and I confirmed that this modification is OK, but it cannot start, uboot printed "Starting kernel..." After that, there is no output, and the power supply is only 5V 170mA. The following is the printing of the serial port. If anyone has been in a similar situation, please give me a little help, thank you very much. U-Boot SPL 2022.07-armbian (Feb 17 2023 - 22:32:08 +0000) DRAM: 2048 MiB Trying …

Hi all, I upgraded my jessie 5.05 desktop version for Orange Pi PC via "apt-get upgrade" to 5.10 without any issues. Now I noticed that the green status LED blinks twice every ~0.5s after first reboot. Can anyone figure out the meaning of this?? Thanks in advance.

Hello all, Recently, I bought an Orange Pi Win Plus board and have installed Armbian on SDcard and it works fine but when i try to install it on emmc using "sudo nand-sata-install" it just shows "install/update the bootloader on SD/eMMC" in the options instead of "boot from eMMC - system on eMMC" as i have seen on the internet . so guys! what am i doing wrong!? Regards,

Hello, I have NanoPi Neo and I cannot make ds18b20 to work, it does not show in the devices folder. On armbianmonitor it writes: http://sprunge.us/fdjC On lsmod: Module Size Used by sunxi_cir 1601 0 w1_therm 2498 0 wire 18294 1 w1_therm gpio_sunxi 8269 0

So, the Linux Kernel 4.6 is out. Supposedly it comes with a lot of new ARM processor support. I'm excited about this. I'm not too knowledgeable when it comes to kernel development, especially with ARM devices. I guess the question is, what's it going to take to move the devices that use these supposedly newly supported chips up to 4.6? I'm somewhat keen on updating to a kernel that isn't approaching EOL.

where can i find de virtual Linux usb server for my orange pi pc and armbian 5.2? i download jessie desktop regards Tex

Hi, Good people of Armbian-land! First of all, thank you all for the awesome work you've been putting into Armbian. I recently purchased an Orange Pi PC, for which I'd like to use the Ubuntu desktop image, since I need the HW acceleration features. I tried using Mainline briefly but after confirming that the performance is just not there without the Mali drivers (as suggested by the description, so no surprise there), it seems Legacy is my only viable option. Which would be fine, but the monitor I'd like to use with my setup doesn't work with legacy (it works fine in Mainline). Also a sidenote: I connected the monitor using an HDMI-VGA converter. I set th…

Hello, I have got my Orange Pi PC+ reading a DS18B20, but it only gives 0.5 degree increments so I believe the resolution is set to 9 bit. This is nowhere near good enough for the application I plan to use it for. When I cat w1_slave I get: 90 01 80 01 1f ff 02 04 5c : crc=5c YES 90 01 80 01 1f ff 02 04 5c t=25000 I have attempted to use this: https://github.com/danjperron/BitBangingDS18B20 but it appears to be specifically for RaspPi. Does anyone know how I can change the resolution to 11 or 12 bit? Many thanks

I have an orange pi pc Just installed debian When it comes up on my TV, I can't sell the first 3 characters of screen, and it runs below the bottom of the TV so I can't see the last line or so How do I fix?

I received my new Orange Pi Plus 2e and tried to set it up. I already got an Orange Pi PC2 running so it's not really something new to me. I used the latest Armbian images (desktop and server), flashed them to my SD card (with Etcher) and plugged it into the Pi. The green LED lights up and the device seems to be working. To this point it's the same as on my PC2. But after ~1min the red LED starts flashing twice over and over and nothing seems to be working. I get no signal over the HDMI out and the LED keeps flashing. I flashed the SD card three times to make sure it's not a flashing error. I tried the desktop image twice and the server image once. It always ends wit…

Hi, i got a Pinebook and install the latest Armbian Image. All is working fine, only the sound output make problems. It isn't matter if i play a mp3 file or a play a YT Video. The sound is just strechted, drawned, like in slow motion. What can i do to solve this issue? Any ideas? Thank you for your help.

I downloaded Armbian_5.59_Orangepizero_Ubuntu_xenial_default_3.4.113.img, and am running it with a 16GB SD card. I am trying to modify the I2C settings, however, when I type `armbian-config`, and select `System`, there is no "Hardware" menu option. This contradicts the documentation: Hardware is supposed to be an option in that menu. This is the current content of the /boot/armbianEnv.txt: verbosity=1 console=both overlay_prefix=sun8i-h3 overlays=usbhost2 usbhost3 rootdev=UUID=54dfde69-e472-48dd-a099-636a963154f3 rootfstype=ext4 usbstoragequirks=0x2537:0x1066:u,0x2537:0x1068:u

I'm trying to disable the HDMI output on my A20-OlinuXino LIME. I have tried to disable the HDMI from the u-boot console using this commands : -setenv video-mode sunxi:1024x768-24@60,monitor=none -saveenv I have also tried to recompile the boot.cmd but even in this way nothing. Corrently i'm using : Linux lime 4.19.62-sunxi #5.92 Where is my mistake? Thanks in advance.

Hi, I moved from Jessie to Stretch. On Jessie i looked under a scope and generated SCK (Orange Pi Lite is Master) is clean. However, after i switch to Stretch, my SPI Slave doesn't work anymore and further investigation reviews that it has similar problem as previous builds that extra clock cycle is generated before data is transfered. The behaviour is exactly similar to following image posted by another forumer but for earlier builds. I am not sure whether any of you experience the same problem. Thanks my armbianEnv.txt verbosity=1 logo=disabled console=both disp_mode=1920x1080p60 overlay_prefix=sun8i-h3 rootdev=UUID=…

Hello guys, im new here and i hope to get some help I bought recently an cubietruck and i installed armbian on it. No i set up openvpn with my client config and tried to start it, without success. Thats the error message: What should i do?

Hi to everyone. I've installed community build Armbian on a Nanopi R1S-H5 and all ok but i see two differents Wlan (Wlan0 and Wlan1). If the board has only one wifi nic, how is this possible? Is there an error in any configuration file or in other place? Thanks in advance.

no new kernel offered since 3.4.112 via apt-get update / upgrade

I want to use GPIO Pi16 on the 13 pin expansion header of the board. This pin is claimed by the kernel for the ethernet MAC. According to the SOC Datasheet this pin has the option to provide a 25 MHz clock signal for the ethernet MAC, which is not relevant for this board. Thanks to this Topic https://forum.armbian.com/topic/30274-armbian-build-how-to-modify-dts-file-to-change-gpio-mapping/ and the device tree source files https://github.com/torvalds/linux/blob/master/arch/arm64/boot/dts/allwinner/sun50i-h618-orangepi-zero3.dts, https://github.com/torvalds/linux/blob/master/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero.dtsi an…

I'm trying to use a few of the GPIO pins as output pins on an Orange Pi PC+ running Armbian 5.26 and legacy kernel 3.4.113-sun8i. When I look at the FEX file, it appears that the GPIO pins have all been disable d by default: [gpio_para] gpio_used = 0 gpio_num = 0 I don't recall them being disabled by default in previous versions of Armbian. I s this a recent change? Anyway, I edited the file and changed it to: [gpio_para] gpio_used = 1 gpio_num = 3 gpio_pin_1 = port:PA13<1><default><default><default> gpio_pin_2 = port:PA14<1><default><default><defau…

When I start kodi it writes to stdout and I see in dmesg My setup Board: Lamobo R1 Kernel: 3.4.113 (default) Xorg DDX: fbturbo GLES: mali r3p0 VDPAU: cedrus This error occurs with various memory reservation settings in kernel arguments including default (no reservation settings at all in kernel cmdline)

Hi! Is PMP support build-in in newer armbian images? I installed ARMBIAN Debian GNU/Linux 8 (jessie) 4.4.3-sunxi on my banana pi. Or is a recompile still needed? With the default image i can see a dmesg "error ahci-sunxi 1c18000.sata: controller can't do PMP, turning off CAP_PMP". If recompile is needed can someone please post a link where to find step-by-step instructions how to recompile armbian with PMP support? Is the guide on htpcguides.com still correct? Thank you

I have a number of OrangePi0. (Custom 3D printed case, 2 extra ethernets on USB. Still have some heat issues even with heat sinks) opi0F has linux-image-next-sunxi 5.92 opi0A has linux-image-next-sunxi 5.37 just because of when they were upgraded. mcr@opi0A:~$ ls -l /lib/modules/4.14.7-sunxi/kernel/net/ipv6/ip6_gre.ko -rw-r--r-- 1 root root 21556 Dec 20 2017 /lib/modules/4.14.7-sunxi/kernel/net/ipv6/ip6_gre.ko root@opi0F:~# ls -l /lib/modules/4.19.62-sunxi/kernel/net/ipv6/ip6_gre.ko ls: cannot access '/lib/modules/4.19.62-sunxi/kernel/net/ipv6/ip6_gre.ko': No such file or directory Is there some reaso…

SULVED! Cant get the wifi operate as i want it. i am using the nmtui tool for configuration. The following logs are with Lan0 connected. ------------------------------------------------------------------------------------- Welcome to ARMBIAN 5.25 stable Ubuntu 16.04.2 LTS 3.4.113-sun8i System load: 0.43 Up time: 29 min Memory usage: 27 % of 1000Mb IP: 192.168.178.19,192.168.178.58 CPU temp: 16°C Usage of /: 12% of 28G Last login: Mon Apr 17 17:09:41 2017 from 192.168.178.49 root@myboard:~# route Kernel IP routing table Destination Gateway Genmask Flags Metri…

Welcome to Armbian Bionic with Linux 5.4.20-sunxi This is the thing I have installed... I'm trying to use the serial ports out of the GPIO header, nominally pins 8 and 10 which depending on what you read maybe ttyS1 or ttyS3. Out of the box whatever they are they're not available. After much googling, I've seen stuff about FEX and DTS none of which mean much to me, I'm guessing Bionic doesn't use FEX as there's no sign of .FEX or .BIN files in the /boot directory. The default state seems to pump garbage out the tx line whatever its doing. Minicom promises to talk to any ttyS? I give it, but theres no answer on loopback, And that's all I have. …

Hey, I was wondering if anyone came across the board layout files. If eagle cad files were available that would be great! I'm assuming that they dont exist.. Or has someone designed a hat or shield for the OPi0? I want to design one and was hoping someone else beat me to it. If not i'll just have to measure it out and make it. I dont want to reinvent the wheel so that would be cool Thanks

Dear Armbian friends, I have question about add DS18B20 temp sensor at RPi-Monitor (web based interface). Can somebody paste working config of this sensor? On internet I found many tutorials but with DHT sensors. On this page (Xavier is an author of RPi-Monitor I think) is described DS18B20 but in status "Working in progress". I tried this but without luck. https://xavierberger.github.io/RPi-Monitor-docs/32_sensors.html?highlight=ds18b20 Cheers, Lucas

Hi. Not so far downloaded the latest available isos for Orange Pi (the very first version) - usb not working - for example for Logitech wireless keyboard or mouse. In the past I've already reported this problem - there was fix. Is it possible to fix again? PS Why there is no separete image for Orange Pi? Why banana pi image? Thanks in advance.

Hello world, this is my first visit in this forum and my first question, please don`t bite me, if somethings wrong (and sorry for my bad englisch too, I`m from germany, blackwood forrest....). I am using my cubietruck now since may 2014, everythings ok. Now i got a week holiday and i thougt about an update for my cubietruck, it`s not about the ubuntu 14.04, it`s more about my old 4 GB SD-Card. OK, 10 EUR and i got an new 16GB Card "up to 80 MB/Sec." which i dont believe, but the problem is at another place: + first writing the image to the new 16 GB card: https://dl.armbian.com/cubietruck/Debian_jessie_next.7z + next backup the old…

Hello, I am new to armbian and am quite impressed of the ease of installation and use. I copied the vanilla headless Debian jessy to a spare SD and the board booted right away. So first of all, many thanks to the developers! I rely on GPIO for my application of the board, so I first tested the export of a GPIO. Normally, the kernel from Olimex gives me something like "gpio64_pg0", which is not very compatible to the programs out in the internet (e.g. OpenHAB.org which I use), so – with this kernel – I was happy to get a standard "gpio1" when echoing "1" to "export". But as soon as I tried to change the direction echo out > gpio1/direction the whole board…

Hi, I installed 'Armbian_5.00_Bananapim2_Ubuntu_trusty_4.4.1_desktop' image recently, because I had some problems with sinovoip images (strange hugh? ). One of the problems was the gigabit ethernet slowness, but it seems with the armbian OS is still the same. I get around 30Mbit/sec only on iperf tests. I have tested my network connections & router and I can get much more speed through other computers, but the banana shows this slow mark. The gigabit ethernet connection was one of the reasons tu buy the banana, but I don't know if I am doing something wrong, if I have a bad unit, etc... I have found some internet benchmarks but all of them are based on the…

I try to use acl but I failed to remount file system with acl if seams kernel compiled with disabled acl for ext filesystem. my fstab config: # UNCONFIGURED FSTAB FOR BASE SYSTEM tmpfs /tmp tmpfs nodev,nosuid,size=256M 0 0 /dev/mmcblk0p1 / ext4 acl,defaults,noatime,nodiratime,data=writeback,commit=600,errors=remount-ro 0 0 /var/swap none swap sw 0 0 and my check for acl in kernel config: root@orangepipc:~# cat /boot/config-3.4.112-sun8i | grep _ACL # CONFIG_EXT4_FS_POSIX_ACL is not set CONFIG_BTRFS_FS_POSIX_ACL=y CONFIG_FS_POSIX_ACL=y CONFIG_GENERIC_ACL=y CONFIG_TMPFS_POSIX_ACL=y CONFIG_NFS_V3_ACL=y CONFIG_NFSD_V2…

Received a batch of OPi PCs and one is not booting. In serial console I get only: U-Boot SPL 2016.09 (Oct 15 2016 - 14:20:45) DRAM: 1024 MiB Trying to boot from MMC1 And that's all. What's wrong with it? SD card and PSU verified working with another OPi devices.

The last time I've used this board was around December 2019. Building images or downloaded from Armbian.com and burning them on a SD card worked fine. Now i'm struggling to get it to boot from SD. Tried these images: https://redirect.armbian.com/orangepizeroplus2-h5/Buster_current https://redirect.armbian.com/orangepizeroplus2-h5/Focal_current Also build my own image (to include some extra modules) Armbian_20.08.0-trunk_Orangepizeroplus2-h5_bionic_current_5.7.12 All of them won't get passed "Starting kernel" Serial log: U-Boot SPL 2020.04-armbian (Aug 05 2020 - 07:58:29 +0200) DRAM: 512 MiB Trying …

Hello, I am going to make a project using OrangePi (most likely OrangePi Lite, but could be other model) with a camera. So, there is my supplication, for someone to make a test and check HOW MANY pictures (let's say 640x480) can the camera take PER ONE SECOND (working continuously, in a loop)? I am interested in both types of cameras: a USB webcam and OrangePi CAM module. And it's about taking pictures, not a movie. By the way - it is possible to take pictures into RAM? I mean not writing it to SD card. It would improve performance :-) Thanks to everyone in advance!

Hi, I'm tring to solve an issue on my Orange Pi Zero: at boot time the pins PA18 and PA19 are stucked to Vcc. I tried a lot of solution, now the best result is to add at the beginning of the file boot.cmd the command to clear the gpio configuration: gpio clear PA18 gpio clear PA19 and recompile the boot.scr. Despite this the pins goes HIGH for some seconds until the bootloader reach this line. What is the boot scheme? Why i get this pin HIGH? Is it because the I2C1 is configured? Is it possible to disable it? Thanks Simone

Hi everyone, What I want to do is to use a DS18B20 through 1-Wire to read temperature on an OPi Zero. The sensor seems to be detected by the board (I see the file under /sys/bus/w1/devices/28-something), and then it disappears randomly after a reboot or a power cycle. (file goes away and obviously I can't get any readings). Then it starts working randomly again after an indefinite amount of reboots. I'm having this problem for a while now, and it's driving me absolutely crazy. This one here on the picture is the sensor I'm using. I have attached a 4.7K Ohm resistor between the VCC and Digital cables, and attache…

Hi, yesterday i see a "armbian-update" message after login per ssh. I run this command and than my banana pi M1 won't boot. How can i repair it without formatting the SSD? Regards Christian

Hello, I know there is documentation about it, but I think I've tried everything and my orange pi is still not displaying on my hdmi screen. The green LED is active, and the red one is blinking. I've written a Raspian image to the sd card, corresponding with the board. I have read about bin2fex but I can't have access to my sd card data on my Windows, to execute bin2fex. Thank you for your help !

Hi, I'm a new user to SBC and is thinking of buy an orange pi pc 2. Since it has a Mali450 GPU and the manufacturer claims that this SBC support OpenGL, can I use that to play some open source games like 0.A.D on armbian? Is armbian have mali gpu drivers installed? Thanks.

Hello, I encounter a strange behaviour with Lime2. When on battery and AC plug-in if I ask for a shutdown -h now, the board reboot by itself and the system does not stop. When on battery only, the board stop with the command shutdown -h now I read about those 2 variables CONFIG_MFD_AXP20X=y CONFIG_REGULATOR_AXP20X=y to set in u-boot/configs/A20-OLinuXino-Lime2_defconfig But after building the a u-boot package with compil.sh this setting does not have any effect... zgrep MFD /proc/config.gz command does not show the CONFIG_MFD_AXP20X=y variable Did I miss something, any ideas ? Thanks Florian

Hi, I'm trying to build wiring on my OPIZ here is the PI: Welcome to ARMBIAN 5.38 stable Debian GNU/Linux 9 (stretch) 4.14.18-sunxi System load: 0.41 0.25 0.10 Up time: 1 min Memory usage: 9 % of 493MB IP: 192.168.1.18 CPU temp: 35°C Usage of /: 8% of 15G here is the log GPIO Utility [Link] /usr/bin/ld: gpio.o: relocation R_ARM_THM_MOVW_ABS_NC against `a local symbol' can not be used when making a shared object; recompile with -fPIC gpio.o: error adding symbols: Bad value collect2: error: ld returned 1 exit status Makefile:48: recipe for target 'gpio' failed make: *** [gpi…

Hi, I am trying to boot image Armbian_20.02.1_Nanopi-r1_buster_current_5.4.20.img, without success ... First, i am using following line to create SD ... ansible@solo:/mnt/backup$ sudo dd if=./Armbian_20.02.1_Nanopi-r1_buster_current_5.4.20.img of=/dev/mmcblk0 bs=1M status=progress ;sudo sync After connected my tty on internal pins on PCB, it is possible to connect to this tty and look at the first u-boot log ... Welcome to minicom 2.7.1 OPTIONS: I18n Compiled on May 6 2018, 08:02:47. Port /dev/tty-target-srv-nanopir1-170-position-1.2.4.1, 20:34:41 Press CTRL-A Z for help on special keys U-Boot SPL 2019.10-armbian (Feb 17 2020 - 06:18:08 +0100) …

After latest update and reboot my Banana Pi Pro does not boot. The boot screen is showing but when it starts loading the kernel, the screen just turns dark and a blinking cursor in left upper corner just appears. What to do?

Thu Jan 24 21:01:03 2019 daemon.info dnsmasq-dhcp[1726]: DHCPREQUEST(br-lan) 192.168.1.124 02:02:04:01:61:60 Thu Jan 24 21:01:03 2019 daemon.info dnsmasq-dhcp[1726]: DHCPACK(br-lan) 192.168.1.124 02:02:04:01:61:60 volumio Thu Jan 24 21:01:03 2019 daemon.info dnsmasq-dhcp[1726]: DHCPDECLINE(br-lan) 192.168.1.124 02:02:04:01:61:60 Thu Jan 24 21:01:03 2019 daemon.info dnsmasq-dhcp[1726]: DHCPDISCOVER(br-lan) 192.168.1.124 02:02:04:01:61:60 Thu Jan 24 21:01:03 2019 daemon.info dnsmasq-dhcp[1726]: DHCPOFFER(br-lan) 192.168.1.124 02:02:04:01:61:60 Thu Jan 24 21:01:03 2019 daemon.info dnsmasq-dhcp[1726]: DHCPREQUEST(br-lan) 192.168.1.124 02:02:04:01:61:60 Thu Jan 24 21:01:03 201…

On legacy kernel, Armbian_5.10_Bananapipro_Debian_jessie_3.4.112.7z, if I use /boot/script.bin with https://github.com/LeMaker/fex_configuration/raw/master/bin/banana_pi_35lcd.bin, my lcd works properly. But on Vanilla kernel, Armbian_5.10_Bananapipro_Debian_jessie_4.5.2.7z, if I change /boot/script.bin with https://github.com/LeMaker/fex_configuration/raw/master/bin/banana_pi_35lcd.bin, my lcd doesn't work. What should I check more?

A couple of weeks ago I took delivery of an Orange Pi Zero Plus 2 H3 it has the form factor I wanted, eMMC support and HDMI which implied I could run a desktop; the H3 was also the variant that seemed to have the best support. Since then I have been trying to get a stable usable desktop environment working. I tried the latest version of Armbian legacy server specifically for this board and that works fine as far as the server version goes so then I tried to add a basic desktop but that didn't work the xOrg driver said there were no screens present and everything I tried after going to Google University failed. Then I tried a couple of distros from the Orange Pi website b…

Hi, I have a problem with usbhost on a NanoPi Duo2 with Armbian Bionic: Linux nanopiduo2 4.19.36-sunxi #5.82 SMP Mon Apr 22 19:12:08 CEST 2019 armv7l armv7l armv7l GNU/Linux Everything works fine so far except for USB hosts. None of the connected USB devices is detected. I am quite sure that the voltage supply is stable. I tried to power the board in two ways: From an USB powerbank (2A) with a short USB cable From a laboratory power supply (1.5A) directly connected to the 5V and GND power pins In both cases, the board works ablsolutely stable, no reboots, no SD card issues, even with some I2C devices and a GPS receiver connected t…

Basically, just did 3 consecutive runs of iperf3, and they look like this. And it is not cpufreq, since setting it to performance on all CPU cores does not affect things. Using the current stable Debian image with kernel 6.1.30. Any ideas? $ iperf3 -c 192.168.103.156 Connecting to host 192.168.103.156, port 5201 [ 4] local 192.168.0.101 port 58758 connected to 192.168.103.156 port 5201 [ ID] Interval Transfer Bandwidth Retr Cwnd [ 4] 0.00-1.00 sec 27.3 MBytes 229 Mbits/sec 0 201 KBytes [ 4] 1.00-2.00 sec 26.4 MBytes 222 Mbits/sec 0 195 KBytes [ 4] 2.00-3.00 sec 26.3 MBytes 221 Mbits/sec …

Hi , I have an orange pi zero . I installed armbian_5.38_Orangepizero_ubuntu_xenial_next_4.14.4 my orangepi zero. when ı use 'sudo nmtui' , it does not see wifi networks. I read many questions and answers about this issue but ı dont solve. I am waiting for your answers.

Good morning all I have an OPi Zero H2 with the official expansion card. My goal is to make an Airport module to connect a speaker to it. The installation of Shairport in APT all is ok I can see the sharing on my iPhone. But the problem is that I have no sound when I plug a speaker into the 3.5mm jack port on the expansion card. I have correctly installed the "analog-codecs" and made a reboot. In Alsamixer I put "Line-Out" and "DAC" to the maximum (red). But still no sound ... When in doubt, I did all these operations on Armbian Focal / Buster / Bionic but it didn't change anything. Can you help me please? believe me I have tried everything for 4 da…

hello, i want use ds2482-100 i2c-> 1wire maxim , but i not see with i2cdetect -y 0 in script.bin : [twi_para] twi_port = 0 twi_scl = port:PB00<2><default><default><default> twi_sda = port:PB01<2><default><default><default> -- [twi0_para] twi0_used = 1 twi0_scl = port:PB00<2><default><default><default> twi0_sda = port:PB01<2><default><default><default> [twi1_para] twi1_used = 0 twi1_scl = port:PB18<2><default><default><default> twi1_sda = port:PB19<2><default><default><default> [twi2_para] twi2_used = 0 twi2_scl = port:…

Hi all, recently my Banana Pi Pro running Armbian 26.5.1 with Debian Trixie received a kernel update from 6.16.8 (which it has been running on for quite a while without issues) to 7.0.12. Since then, it randomly freezes shortly after booting, sometimes I also can see a kernel panic (see attached pictures). Has anyone else run into this issue? What can I do to fix this? The old kernel no longer appears to be present in /boot, which makes it difficult to return to another kernel (trying to run something like apt-get typically quickly results in the aforementioned freeze).

Hello; I use first time Pi based board and Armbian. I need to Java 8 and jfx for working with java app (application.jar) Step 1: Download from JAVA/ORACLE jdk-8u111-linux-arm32-vfp-hflt.tar.gz Step 2: sudo tar jdk-8u111-linux-arm32-vfp-hflt.tar.gz -C /opt ->installs in /opt Step3: sudo update-alternatives --install /usr/bin/javac javac /opt/jdk1.8.0_111/bin/javac 1 Step4 :sudo update-alternatives --install /usr/bin/java java /opt/jdk1.8.0_111/bin/java 1 Step5: sudo update-alternatives --config javac Step6: sudo update-alternatives --config java Step7: download http://108.61.191.178/downloads/openjfx-8u40-sdk-overlay-linux-armv6hf.zip Step8: sudo unzip ope…

Hi, I would like to know if it is possible to limit USB speed to 1.1 standard on orangepipc and how to do it? I know it is doable on raspbian but I couldn't find info about doing this on armbian

Hello everyone, This is my first post, but i've been using armbian for almost one year (https://twitter.com/logicite/status/682267764384501760), so : thank you for your work ! I use armbian ubuntu on Olimex A20 lime 2, and on LeMaker Banana Pro. So far no difficulty, or i was able to find the answers on the forum. This time, i can't find anything, so i'm asking for your help : A few months ago i was able to use the onboard sound card on the BananaPro. It was showing up in alsamixer and in aplay -l. The sound was not good so i used a USB sound card instead. Today, i can't find this onboard sound card any longer. I suspect this is due to some update in …

I bought an Orange Pi PC "Set 9" that came with ribbon camera module (total 20 eur) to compare with Raspberry 3. After finally getting it to take a picture using fswebcam I find the images very low quality. Most passable without any extra lighting is 640x480. 800x600 and 1600x1200 produce nearly black images. Using Raspberry 3 with similarly priced chinese camera produce much better images with lower lighting. Am I missing something or is the camera quality this bad in comparison? I usually expect OK results from "chinese clones" but this is really. The best image I could get was: sudo fswebcam -r 640x480 --fps 25 -p YUV420P cam.jpg

Hello there, Some time ago there was a note about "no sound in M2" and what about present time? Just tried 5.24 and still: root@bananapim2:~# lsmod Module Size Used by evdev 9348 0 ir_lirc_codec 4088 0 lirc_dev 6245 1 ir_lirc_codec sunxi_cir 3159 0 sun4i_ts 3350 0 sun4i_ss 13314 0 uio_pdrv_genirq 2780 0 uio 6272 1 uio_pdrv_genirq cpufreq_dt 2856 0 sun4i_codec 10232 0 snd_soc_core 97900 1 sun4i_codec snd_pcm_dmaengine 2770 1 snd_soc_core snd_pcm 57610 2 snd_pcm_dma…

Dear all, My small server based on the Cubietruck board and Armbian OS (ARMBIAN 5.38 stable Debian GNU/Linux 9 (stretch) 4.14.18-sunxi) runs flawlessly since over 2.5 years now. And I am very happy with this setup. Lately, I installed a battery (5.3 Ah 3.7 V) in order to have the server a bit portable. The battery. driven system runs approx 9 - 10 h. Since I want to prevent that the battery drains out completely I configured the following cronjob: */15 * * * * /home/ncuser/nc_batt_cap_shutdown.sh > /dev/null 2>&1 The content of the script looks as follows: #!/bin/bash ### Script idea taken from: # http://www.schulz-alex.de…

Hi there, I have an OPi3 box that acts as home surveillance server. It has WiFi configured as AP, client is Android phone with static IP/routing and IP Camera software. Problem is, that there is NO IP routing. I CAN access video / pictures from phone on OPi box, but NOT from my LAN. Below is routing table and iptables. Looks ok but not working. I am able to access (from LAN) WiFi IP of OPi. Also can access video served by "motion" software on OPi. But no direct connection to Android phone. root@orangepi3:/tmp# route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 1…

Hi, I have ten orange-pi pc plus with Ubuntu 20.04.2 LTS with Linux 5.10.43-sunxi burned onto emmc, and twenty orange-pi pc plus with Focal 21.05.6 with Linux 5.10.43-sunxi burned onto emmc. In an attempt to provoke the same issues we have with Xenial on these boxes, I have all of them rebooting (shutdown -r now) once every 10 minutes. They have all been under test for several days. They are all connected to a LAN backbone, but the LAN is not connected to the internet, so whilst they may be attempting to do unattended upgrades, for example, they are all failing. This is a deliberate part of the test. Of the twenty Focal 21 boxes none have failed. …

I've had an Orange Pi 3 LTS for a couple of months now. I bought it for use as a home theater tv box. I thought I'd use the official orange pi ubuntu release, but it turned out to be really outdated and broken. So I have been trying to get Armbian to work. After a lot of troubleshooting and time spent reading docs and forums, I can't get the thing to play video properly. It plays but is terrible quality and stutters constantly. I've determined that panfrost is working. In orangepi-config, under Hardware, it says the GPU is enabled. But when I run glmark2 I get a score of 100 or less no matter what I do. I've tried old builds of armbian for the pi 3 lts and the…

Hi, I run a Linux Armbian_5.24_Cubietruck_Debian_jessie_4.8.15 on a Cubietruck with the kernel on version 4.8.15-sunxi. When i want to enable the wifi module, this don't work. I have see a response on https://forum.armbian.com/index.php/topic/252-cubietrack-wifi-bug-hostapd-bcmdhd/ so i do "modprobe brcmfmac" which return any message. But after that, i can't use the wifi. When i do an ifconfig, i see only eth0, bond0 an lo butno wlan0. Can you help me to use the wifi on my cubietruck ? PS : Sorry for that bad english, i'm a french user which don't speak english very well.

I've been playing with remote desktop from windows 10 to my orange pi plus 2e, finally got it working correctly using this forum tightvnc and xdrp . i was having trouble with it send all commands to the main user instead of the current remote session. the symptom of that was chrome didnt seem to work remotely, but when i checked the main screen many chrome windows were open. so i uninstalled vino, tightvnc, etc. and reinstalled tight and xdrp voila! ok so now chrome opens correctly so i went to test youtube which seemed a bit slower.. redraw etc. and no sound! so now my question is - does this remote setup support sound ? I have heard you can't watch movie…

I am really confused about how to connect an LVDS monitor to the board. We used 3.x legacy kernel and used a .fex file for this in the past. But it is time to move to mainline, and it is confusing me. Since LVDS is not plug and play, we need to tell the parameters of the screen somehow. That is clear. I found several ways of pushing parameters to the system: 1. Compile into kernel 2. Compile into U-boot 3. Device Tree 4. Device Tree Overlay 5. Kernel command line According to these articles i have to compile them into U-boot: https://forum.armbian.com/topic/1905-enabling-lcd-in-u-boot-kernel-472/ ht…

I'm using a fairly newly created Armbian_5.25_Orangepizero_Ubuntu_xenial_default_3.4.113 on my orange Pi Zero, trying to port a set of programs from Raspberry Pi where they work OK. I use a script to build: gcc -o myProgram myProgram.cpp -lwiringPi -llibpthread and my problem is that ld reports that it cannot find libpthread.so. find / -name libpthread.so -print reports that the library is located in /usr/lib/arm-Linux-gnueabihf/ and indeed it is. There is no ld.so.conf file in /etc. so how do I get my program to complete linkage? Peter. PS: I seem to have succes…

Hi! Armbian_21.08.1_Orangepiprime_focal_current_5.10.60_xfce_desktop sometime failed to boot. No green indicator, and black screen. Tried to decrease CPU max frequency sudo nano /etc/default/cpufrequtils ### ENABLE=true MIN_SPEED=480000 MAX_SPEED=1200000 GOVERNOR=ondemand ### but still failed to boot sometimes. Armbian_5.75_Orangepiprime_Debian_stretch_next_4.19.20_desktop have been installed before and boot fine during 2 years.