Rockchip

Is anyone having issues with the Cinnamon desktop version restarting the desktop when using the menu app launcher? Can be repeated by launching with super key and typing anything for search or just launching any application. Happens with all 3 major menu app launchers. menu, cinnamenu and cinnstark Pinebook pro

My Helios64 NAS is suddenly randomly just, stopping. It appears to be totally random. It doesn't appear to be some form of actual shutdown as the front panel lights all stay on. I lose all access including the serial console. The only way to reboot is a long press on the power button to actually physically reboot the box. I've cranked the verbosity up to 7 in /boot/armbianEnv.txt in case something is output on the serial console but I've not seen any useful output yet but for obvious reasons it's hard to catch it happening. Because /var/log is cleared every boot I can't see if anything was logged just prior to the halt event. Not sure where to…

There are a number of modifications that have been suggested that people implement to address certain issues. The ones I can find are: - In /boot/armbianEnv.txt: extraargs=libata.force=3.0 - If doing debugging, also add: verbosity=7 console=serial extraargs=earlyprintk ignore_loglevel - In /boot/boot.cmd regulator dev vdd_log regulator value 930000 regulator dev vdd_center regulator value 950000 and then run: mkimage -C none -A arm -T script -d /boot/boot.cmd /boot/boot.scr - In /etc/default/cpufrequtils: ENABLE=true MIN_SPEED=408000 MAX_SPEED=1800000 GOVERNOR=ondemand (or 1200000 instead of 1800000) …

Hello, I've got my Helios64 since a few week now and enjoying it a lot. I've installed k3s on it with various applications. The next step is to install home assistant to control my home. Previously, I've already had a setup with a RaspberryPi with a Arduino Mega connected, that is running the rflink firmware. That way I, can control cheap 433Mhz power switches. The problem is, when I connect the Arduino (acting as a serial input device) to my Helios64, the system does not startup anymore. The following error message is printed on the serial console: WARN halted endpoint, queueing URB anyway. Unexpected XHCI event TRB, skipping... (f5f5deb…

Hi, my company have commissioned at an external company ti develop a device based on rk3399. The external company have returned a device with a Debian 10 Linux image for the device. We are not satisfied about its the Debian distro maded by the external company because the UI it is not perfect. Sometimes, by moving forms, a little part of the display is not repainted correctly or sometimes a portion of a form disappear. So the question is: wich is the right way to build a Debian distro ourself? I have tryed ubuntu fiendlyarm. The os starts, I can enter by ssh but nothing appear on the display so, wich is the righ way to manage the hardware configuration of a custom d…

U-boot defaults to "In: serial" and also listens for packets (its assumed that its a keyboard/terminal) so that a keypress can stop autoboot. I am successfully using /dev/ttyS2 after modifying /boot/armbianEnv.txt (Console=Display) and masking the gettyS2 service. The device/system I have connected to UART2 (/dev/ttyS2) periodically sends bytes. Thus, if a remote restart or a cold boot is performed (power glitch or power reset) while that system is connected to UART2, it triggers the abort of Autoboot. Requiring the other system/device to be disconnected from UART2, a cold boot of the RockPi4 and then reconnection of the system/device to UART2. I…

I've been hopelessly trying to get Armbian(Buster) and OMV to work together properly. But alas no luck. I decided to start over using a fresh and latest image on the SD card. I believe I may have unwittingly screwed up the eMMC boot process because I added an M.2 SATA drive in yesterday and have since removed it. Hence my quest to simply get the SBC up and running from the SD card. I have tried everything this morning, I cannot get an image to load at all. One of my questions is; do the hard drives need to be installed just to get the SBC working? I have tried with them in and out to no avail. Are there some lingering config files residing on the HDs th…

Hey, posting this in hopes that someone might have an ideas as to why this is happening. I've been dealing with an issue with my ZFS pool for a while now where the pool gets suspended but there are no other error indicators. WARNING: Pool 'rpool' has encountered an uncorrectable I/O failure and has been suspended. I'm using ZFS on top of LUKS and used to have problems with my drives resetting due to SATA errors, but I haven't really seen that issue since I started using my own SATA cables and limiting SATA speed to 3 Gbps. My working theory for last week has been that it's a problem with the CPU, perhaps some handover between big.LITTLE. So I've t…

Hello together, I'm using this board inclusive PoE - Board with the ARMBIAN - Image. Now I have a question about the FAN on this PoE - Board. Does anyone know, how can I enable the FAN permanently, because the heat from the CPU is to high and I don't want to kill this board with overheating..... Best regards Matthias

After a recent update to non-kernel stuff, my Helios64 will no longer boot. When attempting to, I get this error: [ 32.425508] xhci-hcd xhci-hcd.3.auto: Host halt failed, -110 [ 35.019496] xhci-hcd xhci-hcd.3.auto: Host halt failed, -110 [ 35.020028] xhci-hcd xhci-hcd.3.auto: Host controller not halted, aborting reset. I had been using the eMMC on board to boot with the SD card as a backup, but now neither one is working. Anyone know if there's a way to fix this? Here's more, using verbosity=4 in the armbianEnv.txt. Spoiler DDR Version 1.24 20191016 In channel 0 CS = 0 MR0=0x18 MR4=0x1 MR5=0x1 MR8=0x10 MR12=0x7…

I've built custom Linux 5 kernel for Oprange PI 4 including only options required for this board and module drivers for peripheral devices. Long story shor: It works, it boots, it runs, it's hot. Now I _think_ I've located cause of overheat: Linux 5.*.* 08:58:34: 1800/1416MHz 2.84 50% 1% 8% 0% 40% 0% 73.3°C 0/5 08:58:40: 1800/1416MHz 2.85 28% 0% 7% 0% 20% 0% 73.3°C 0/5 08:58:45: 1800/1416MHz 3.35 62% 0% 8% 0% 53% 0% 75.6°C 0/5 08:58:50: 1800/1416MHz 3.96 48% 1% 9% 0% 37% 0% 73.9°C 0/5 08:58:55: 1800/1416MHz 4.04 42% 0% 8% 0% 33% 0% 76.9°C 0/5 08:59:00: 1800/1416MHz 4.20 71% 1% 8% 0% …

I've been having HDD/SATA issues with my zfs pool, as have many others. Now my HDDs will not spin up or be recognized when on slot 1 or 2. What's wrong, how to check and what to check? Any help appreciated.

I seem to have hit another problem with my Helios64. It seems that overnight, HDs 4 and 5 disappeared and no longer seem to be powered. I've disconnected all the other drives and tried it with just 4, and it seems to be a power problem as the drive activity light seems to light up for a short while, but not at full prightness. Also I note that SATA 4 and 5 are on a separate power line to the other 3. Anyone seen this before? Is it fixable?

My Helios has been running well for the most part stable for the past few weeks however last night i noticed when looking at my file systems in omv that my 14 GiB eMMC drive which houses my ambian install is at 13.13GiB and looks to be growing. Normally this sits around the 5 GiB. I have checked my docker install for anything suspicious but my plex docker is only taking up about 400mb. looking at my system logs i am getting a repeated this error which is new and might be related however i am not really sure what program is casing it. Jun 10 17:32:27 localhost rsyslogd: [origin software="rsyslogd" swVersion="8.1901.0" x-pid="1322" x-info="https://www.r…

The second USB port of NanoPI R4s is not working -- the logs were created with a USB disk inserted in port 2. # lsusb -t /: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/1p, 5000M /: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/1p, 480M |__ Port 1: Dev 3, If 0, Class=Vendor Specific Class, Driver=pl2303, 12M If I remove and swap the USB devices: # lsusb -t /: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/1p, 5000M |__ Port 1: Dev 2, If 0, Class=Mass Storage, Driver=usb-storage, 5000M /: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/1p, 480M Other user…

If someone of you likes karaoke I highly can recommend running UltraStar Deluxe (OpenSource SingStar clone) on the Rock Pi 4. https://github.com/UltraStar-Deluxe/USDX I‘ve used the Focal gnome desktop 5.10 image and built UltraStar Deluxe as described. Performance is very good!!! Even with 1080p videos I can‘t see a difference compared to my desktop pc. With the original wireless PS3 SingStar microphones this is a pretty nice and portable setup.

Posting here following what was recommended on twitter. After updating my helios64 earlier this week and rebooting to get the new kernel, I realized it was suspiciously silent. A quick check to sensor temps readings and physical check made me realize the fan were not spinning. After a quick read on the wiki, I checked fancontrol which was indeed failing: root@helios64:~ # systemctl status fancontrol.service ● fancontrol.service - fan speed regulator Loaded: loaded (/lib/systemd/system/fancontrol.service; enabled; vendor preset: enabled) Drop-In: /etc/systemd/system/fancontrol.service.d └─pid.conf Active: failed (Result:…

Hello, today i try a USB C to HDMI Adapter and i get some picture on tv but it´s really unreadable and my log is full of this: rockchip-vop ff8f0000.vop: [drm:vop_plane_atomic_update [rockchipdrm]] *ERROR* Maximum dst width (3840) exceeded it is possible to restrict the resolution in the terminal? i think this error ocure because to high resolution or wrong detection Thank you

Hello, I'm trying to use the NanoPi M4v2 SPI however it doesn't seem to work. I used armbian-config to enable the gpio overlay: [ ] dwc3-0-host [ ] i2c7 [ ] i2c8 [*] pcie-gen2 [ ] rk3328-opp-1.4ghz [ ] rk3328-opp-1.5ghz [ ] rk3399-opp-2ghz [ ] spi-jedec-nor [*] spi-spidev [ ] uart4 [ ] w1-gpio And the SPI isn't showing up on /dev: ls /dev/spi* ls: cannot access '/dev/spi*': No such file or directory Wasn't this enough to be able to use the SPI1 on this board? SBC: NanoPi M4V2 System: 5.10.35-rockchip64 #21.05.1 SMP PREEMPT Fri May 7 13:53:11 UTC 2021 aarch64 GNU/Linux Thank you.

My Helios64 setup has been running stable for months now (except for one MOSFET that failed and had to be replaced), however after recent updates using the OMV5 package manager I am unable to transfer files to my computer (SMB shares). When trying to transfer to a Windows computer the transfer speed immediately plummets to 0, stays there forever or File Explorer crashes/stops responding. When transferring to an Ubuntu system the transfer time outs. I can browse the files on the SMB share, I can play them (movies, music, etc) or run them directly with no issues. I can transfer files using scp with no problem (just at much reduced speed/bandw…

Fresh install of Armbian_21.05.1_Rockpi-4b_buster_current_5.10.35 Ran apt update/upgrade Reboot arm-config>softy>install linux headers It seems to be affecting the latest release only. Tested with Armbian_21.02.3_Rockpi-4b_buster_current_5.10.21 and it works until it's upgraded. I also tried disabling kernel upgrades before upgrading and still received this error.

hi all. I recently updated my Kurnel and rebooted my Helios64. when it loaded in to OMV i noticed my raid drive is missing. i can still see the disks just not the raid drive . Checking on the array i can see it failed with an error 524. Would love some suggestions on how to repair the array. below is the details i was able to get,.. sorry for the large info dump root@helios64:~# mdadm --run /dev/md0 mdadm: failed to start array /dev/md0: Unknown error 524 root@helios64:~# mdadm -D /dev/md0 /dev/md0: Version : 1.2 Creation Time : Mon Dec 14 16:49:07 2020 Raid Level : raid0 Raid …

This is the uart output of the latest image Armbian_21.05.1_Nanopct4_focal_current_5.10.35.img.xz DDR Version 1.24 20191016 In Channel 0: LPDDR3, 800MHz CS = 0 MR0=0x58 MR1=0x58 MR2=0x58 MR3=0x58 MR4=0x2 MR5=0x1 MR6=0x5 MR7=0x0 MR8=0x1F MR9=0x1F MR10=0x1F MR11=0x1F MR12=0x1F MR13=0x1F MR14=0x1F MR15=0x1F MR16=0x1F CS = 1 MR0=0x58 MR1=0x58 MR2=0x58 MR3=0x58 MR4=0x3 MR5=0x1 MR6=0x5 MR7=0x0 MR8=0x1F MR9=0x1F MR10=0x1F MR11=0x1F MR12=0x1F MR13=0x1F MR14=0x1F MR15=0x1F MR16=0x1F Bus Width=32 Col=10 Bank=8 Row=15/15 CS=2 Die Bus-Width=32 Size=2048MB Channel 1: LPDDR3, 800MHz CS = 0 MR0=0x58 MR1=0x58 MR2=0x58 MR3=0x58 MR4=0x2 MR5=0x1 MR6=0x5 MR7=0x0 MR8=0x1F MR9=0x1F …

Hi. I am going to be crazy with this bad SBC (it is not the RsbPi killer!!). Armbian recognize Bluetooth and the PCIe M.2 drive but not the mDP, that I want because the HDMI one is not well soldered. I need the NVME disk too. But I am writing because in the Radxa forum they said that there is a patch to solve this mDP issue. They told me that it is simple to solve!!! But I did not understand what I can do with these codes. I send the link that they gave to me. Thanks for the help. Patch_github

Hello, i did an update of the system (apt dist-upgrade), and after the system doesn't start anymore. I use internal MMC, so I tryed to use last Armbian buster (Armbian_21.02.3_Helios64_buster_current_5.10.21.img) from sd card and it works. I mounted the MMC, fsck and finally chrooted into it and did an apt update and dist-upgrade, I atach the console log, the system hangs on Starting Kernel. helios64_20210514.txt

I'm working on a new distro which is an ARM port of slackware64-15.0 beta. The cooked image is here: http://mirrors.aptalaska.net/slackware/slarm64/images/helios64/ This image is built using the build scripts at https://gitlab.com/sndwvs/images_build_kit/-/tree/arm/ The high level view is that it's downloading the kernel from git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git (linux-5.12.y) then applying the patches found at https://gitlab.com/sndwvs/images_build_kit/-/tree/arm/patch/kernel/rk3399-next then builds the kernel with config https://gitlab.com/sndwvs/images_build_kit/-/blob/arm/config/kernel/linux-rk3399-next.config…

I originally installed Armbian witk Kernel 4.4 on my Nanopi.m4 and later upgraded it to 5.10 via armbian-config. Things work fine but whenever I got a new update via apt update, things get messed up a bit the /boot/Image got linked to vmlinux-4.4.213-rk3399 instead of vmlinuz-5.10.35-rockchip64 while others uInitrd -> uInitrd-5.10.35-rockchip64 dtb -> dtb-5.10.35-rockchip64 The result's the board couldn't boot-up, when I restarted it. And, I need to correct the Image -> vmlinuz-5.10.35-rockchip64 and doing mkimage -C none -A arm -T script -d boot.cmd boot.scr from another linux machine to the SDCard. It works fine …

Hi there, Just got OPi4 after some problem from Chineses... Problem: - no at all output at HDMI (connected to HDMI-VGA converter and 1920x1024 VGA LCD display, works with OPi PC+), - if Eth connected device gots (after few minutes) IP from DHCP. - no server running on that IP (tried telnet, ssg, WWW), PING works. uSD card with Armbian Buster for OPi4. What to check next? Console? What speed? 115200 or 1.500.000?

Despite this being the supported image advertised for the board, it just does not boot on this board, whereas the "current" image does boot (but with limited hardware support). I'm booting with just the serial console connected, to limit interferences On serial console with default config I get: Found U-Boot script /boot/boot.scr 3185 bytes read in 4 ms (777.3 KiB/s) ## Executing script at 00500000 Boot script loaded from mmc 1 117 bytes read in 3 ms (38.1 KiB/s) 7861795 bytes read in 361 ms (20.8 MiB/s) 20770824 bytes read in 941 ms (21.1 MiB/s) 104363 bytes read in 11 ms (9 MiB/s) 2698 bytes read in 7 ms (376 KiB/s) Applying kernel provided DT fixup…

Note that I want to use Hardware acceleration also later, but the issue is that it seems there's no HA for ffmpeg on the chip as you can see here. Thanks in advance!

Hi all! Is it possible to configure Orange Pi 4 wifi to work in AP mode ? Will both 5ghz and 2.4 ghz be supported ? Thanks for advance in answer.

Hello, Followed instructions and installed zfs, rebooted, installed all updated via apt update and apt upgrade, rebooted and situation is like this: root@helios64:~# zpool status The ZFS modules are not loaded. Try running '/sbin/modprobe zfs' as root to load them. root@helios64:~# modprobe zfs modprobe: FATAL: Module zfs not found in directory /lib/modules/5.10.21-rockchip64 root@helios64:~# apt install zfsutils-linux Reading package lists... Done Building dependency tree Reading state information... Done zfsutils-linux is already the newest version (2.0.3-1~bpo10+1). 0 upgraded, 0 newly installed, 0 to remove a…

I am having the issue that after some time running (like a day). Rebooting results in crashing during kernel loading. Than I have to hardreset the system and it boots. If I reboot right away again, no issue. Spoiler [62387.280373] reboot: Restarting system DDR Version 1.24 20191016 In soft reset SRX channel 0 CS = 0 MR0=0x18 MR4=0x1 MR5=0x1 MR8=0x10 MR12=0x72 MR14=0x72 MR18=0x0 MR19=0x0 MR24=0x8 MR25=0x0 channel 1 CS = 0 MR0=0x18 MR4=0x1 MR5=0x1 MR8=0x10 MR12=0x72 MR14=0x72 MR18=0x0 MR19=0x0 MR24=0x8 MR25=0x0 channel 0 training pass! c…

Dear all, I am highly interested in the Helios64 and registered for the next batch. Here are a few questions, I hope that your guys can answer. The OS is Embedded Debian I assume. Questions are quite simple: 1) Hard drive numbering on startup Under Debian, the hard drives in a RAID array are renumbered on each startup by random: /dev/sda, /dev/sdb, etc ... This means that if drive /dev/sdb fails ... it is not necessarily the second hard drive in the bay. I already lost a RAID server extracting the wrong disc in an array. Then I migrated to a Synology NAS and notices that this problem had been fixed as dis…

Hi folks I'm running a fresh install of the Debian branch with 5.X Kernel branch. I got 2 new 4TB HD setup with MDAM in RAID 1 mode to store my photo and documents with Syncloud also running on the HELIOS64. I Got also a 2,5 Sata drive mount and share via Samba to my home network. My Helios64 is plugged via the 2,5GB Ethernet port directly to my Router on the 2,5GB port. I didn't fix the hardware bug, but if I understood it's not necessary in my case ( 2,5GB Ethernet on a 2,5GB Ethernet Router) My problem is that on the same router I got an Apple TV (on ethernet port too) with Infuse app on IT. And there is the problem I got big…

Looks like OPi4 has two active UART interfaces (ttyS2, S4). S2 is connected to the back 3 pins which are the debug ports, and S4 is uart on pins 19,21. Is there anyway to bring up another interface for UART on Pins 8, 10? Ive tried adding uart1,2,3 etc in armbianEnv file in /boot as well as console=display but non of this works.

Armbian (I try a lot of versions include Armbian Focal xfce mainline based kernel 5.10.y) fails on Orange Pi 4B. 1. Orange Pi 4B booting normal, I try to do hard job and... it restarting every time after try to do hard job like build Qt or running benchmark and never boot normal again while powered. I need off power supply, on power supply and Armbian boot normal again and goto 1. I use Orange Pi 4B (on pcb v 1.4) with Ubuntu 18 from xunlong (Linux 4.4.179-g4cac54c6-dyrty). It works ok even I build big apps like Qt or run benchmarks. I also building my own Ubuntu 18 using xunlong script and it also working ok. Why I can't use Armbian fo…

Hello, we have a strange thing here. Since ... (I don't remember), the tray number 2 is not working. We tried with 3 different disks but each of them, when inserted in tray n2, aren't start. Why ? And how to fix that ? Thank you. PS: other trays (n1, n3, n4, n5) are ok.

It’s been 3 months since we posted on our blog. While we have been pretty active on Armbian/Kobol forum for support and still working at improving the software support and stability, we have been developing in parallel the new iteration of Helios64 around the latest Rockchip SoC RK3568. However things haven’t been progressing as fast as we would have wished. Looking back, 2020 has been a very challenging year to deliver a new product and it took quite a toll on the small team we are. Our energy level is a bit low and we still haven’t really recovered. Now with electronic part prices surge and crazy lead time, it’s even harder to have business visibility in an …

Very interested in the Helios64, but can't help but to notice the rockchip cpu in it is 5+ years old at this point. Any plans to upgrade it to a more modern cpu? At this price range I'd probably lean towards an Odroid H2+ with a celeron J1114 chip which has like 2-3x the multicore performance and a similar TDP

Hi, I'm struggling to get some sound through a PCM5102a module connected to GPIOs. I guess I've to make a dts-overlay to enable it on i2s0 but I didn't succeed, I'm very new to that. Could anyone tell me how to achieve that ? Many thanks for your work !

Hello, so we use Kobol 64 with OMV since 4 months, and no problem at all. Just yesterday, want to change Ethernet cable, correctly shutdown the Helios64 NAS, and impossible to start it again. Just have the right system light, but left LED no blinking, no information in the USBC terminal. For the "recovery", press the recovery button, and then press the power button, and the LED System don't light up. What can we do, format the system, and reinstall OMV with all parameters... Not really serious, ins't it ? Thank you for any help. Regard.

Hello guys! Recently I bought a Helios64 NAS and now I am playing around with it. My intention is to set it up as I need it, but I also want to understand how the system works. The last weeks I did a huge effort to read everything about what armbian exactly is, how it works, and also how the boot process works. I would say I have a good overview of the topics right now, but now I am at a point where I need your help. My intention right now is the following: I want to make an automatic backup system, which runs regularly and saves the backups incrementally on an external HDD. The idea is: When I am messing up my system (which I certainly will when p…

Hi, hopefully my english and my linux skills are good enough (little bit experience with raspi and odroid i´ve setup Rock Pi 4 C with nvme boot from spi (first mmc) Armbian 21.02.3 Buster with Linux 5.10.21-rockchip64 after some difficulties to setup boot from nvme it is running on ADATA SX6000PNP when i perform reboot - mostly no reboot after disconnect power and reconnect no boot until i wait > 1 minute during the day i try sudo armbianmonitor - u and i get a link now when i use this command there is no more link serial console - i get no output but i can log in after a while Thanks

Checked latest armbian buster and focal. In both disks, connected to second USB (not the middle one) not recognized (nor fdisk -l, nor dmesg). In friendlywrt both USB ports work as expected. Hirsute 10.4.21 also fine.

I am trying to get a camera going on the Nanopi-m4 (I have tried another board as well with similar results). The sensor is setup in the device tree correctly and gets probed on boot. However there are some issues when loading rkisp1. [ 5.645127] rkisp1 ff920000.isp1: Adding to iommu group 5 [ 5.645695] rkisp1 ff920000.isp1: Failed to get clk 'clk_isp': -2 [ 5.645814] rkisp1: probe of ff920000.isp1 failed with error -2 My understanding with Failed to get is because it is either being used by another resource or was not defined correctly. Below are my entries in the device tree for the isp. I am using `isp1` in this case, I am assuming as wel…

I'm in the process of upgrading my network and with the Helios64 capable of 2.5 GbE, what are some people's switch recommendations? My needs aren't really too high so I think 5 ports should be enough until the rest of the infrastructure catches up in my home network. My short-list are: * QNAP QSW-1105-5T * TP Link TL-SG105-M2 * TRENDnet TEG-S350 Article from servethehome

Hi All, My helios64 died the other day - well failing to boot. It had been solid for quite some time, then I might have made the mistake of updating it.... This is from putty on booting: DDR Version 1.24 20191016 In channel 0 CS = 0 MR0=0x18 MR4=0x1 MR5=0x1 MR8=0x10 MR12=0x72 MR14=0x72 MR18=0x0 MR19=0x0 MR24=0x8 MR25=0x0 channel 1 CS = 0 MR0=0x18 MR4=0x1 MR5=0x1 MR8=0x10 MR12=0x72 MR14=0x72 MR18=0x0 MR19=0x0 MR24=0x8 MR25=0x0 channel 0 training pass! channel 1 training pass! change freq to 416MHz 0,1 Channel 0: LPDDR4,416MHz Bus Width=32 Col=10 Bank=8 Row=16 CS=1 Die Bus-Width=16 Siz…

While I like having the helios-ups.timer in case of power failure, I don't like that my logs get three lines written to them every 20 seconds. Apr 09 07:43:26 helios64 systemd[1]: Starting Helios64 UPS Action... Apr 09 07:43:26 helios64 systemd[1]: helios64-ups.service: Succeeded. Apr 09 07:43:26 helios64 systemd[1]: Finished Helios64 UPS Action. Does anyone know if there is a way to keep the timer on but not fill the logs this way? Everything I've found about silencing systemd messages is about the output of the command, not the systemd activity itself.

Title says it all: The Images offers by the site https://www.armbian.com/nanopineo3/ simply doesn't work on a NanoPi Neo3. I don't have a Serial-Connector to find out what's going on during the Boot-Process. I connected a Router on the Lan-Interface, and the Router never get a DHCP-Request from the Neo3. Tried multiple times, SD-Card is fine (tested). If I use an Image from a totally different Project (for Example "DietPi" which also offers a Neo3-Image), it works like a charm. Router gets DHCP-Request, I can connect using SSH (and so on), everything works. My Neo3 is working fine, Power-Supply is also good (it's made for Raspberry Pi and offers 5.1V and 3A...…

Is there an accepted procedure for moving from using ramlog to logging to disk? I've looked but everything I can find is about setting up ramlog. I assume it's more complicated than just creating a partition (or ZFS dataset) and mounting it /var/log, disabling ramlog, and rebooting.

Hi all, unfortunately the USB power port on my Nanopi has broken off and I can't see a way to reattach it - it looks like it's just a push fit onto the board on 4 little tabs no solder involved no wonder it eventually fell off. I've heard that it's possible to power the Nano via the GPIO pins - anyone here done that ? I'm thinking I could make a cable to connect to the pins

Hi there, as the Chinese market is missing "in stock" OPi4 (not B), RockPi 4B (for more than a month) I am looking for alternative. Found "Asus Tinker Board 2", same RK3399, 4GB RAM, 4xUSB3 as plus (OPi4 has 2x3.0 + 2x2.0, AFAIK). https://pl.aliexpress.com/item/1005002304966362.html Is it compatible with Armbian or have I to wait until OPi4 / Rock Pi 4B will be available? (as it is not listed in subforum header). Laurent.

I'm trying to understand the role of zram and having some difficulties with it. I've looked in several places and my understanding is this: - It's a block device in RAM that uses compression - It functions similar to swap I notice that mine is set to about 2 Gb: wurmfood@helios64:~$ cat /proc/swaps Filename Type Size Used Priority /dev/zram0 partition 1945084 0 5 My questions: 1. Does that mean 2 Gb of the device RAM is used for the zram swap device? 2. I can understand this on devices with slower storage, b…

Current version using Armbian 21.02.3 Focal with Linux 5.10.21-rockchip64 I have tried to edit /etc/default/cpufrequtils : ENABLE=true MIN_SPEED=600000 MAX_SPEED=1512000 GOVERNOR=ondemand Save and run the command : service cpufrequtils restart However, the cpu freq only hit the max of 1.30Ghz. Running the command : cat /sys/devices/system/cpu/cpu{0,1,2,3}/cpufreq/scaling_available_frequencies 408000 600000 816000 1008000 1200000 1296000 408000 600000 816000 1008000 1200000 1296000 408000 600000 816000 1008000 1200000 1296000 408000 600000 816000 1008000 1200000 1296000 Is it po…

Thank you Armbian guys for providing and supporting a working 5.10 image for the Rock Pi 4C board. Has anyone been successful in configuring and using a matched CSI camera with a 5.x kernel for this board? If so, can you share the required conf steps here? Radxa's website (https://wiki.radxa.com/Rockpi4/MIPI_Camera) claims that their provided Debian image supports both RPi ov5647 and RPi imx219 based cameras so that confirms hardware compatibility but so far I haven't been able to capture images/video with neither on Armbian when attached to a Rock Pi 4C. $ ls -l /dev/video* crw-rw---- 1 root video 81, 0 Apr 3 07:30 /dev/video0 crw-rw---- 1 root video 81, …

Sorry to repeat another case of this. Have attempted a few times to move boot from SD card to eMMC before the SD card fails. I did according to the wiki doc with nand-sata-install. Since I have OMV, I excluded the exports, and also afterward copied the salt and pillar. Also, in another attempt, on suggestion from another thread, I updated the boot loader and copied again. I can boot to my SD card, mount the eMMC, and see the root structure. From what I can tell in reading the boot output, it can't find any storage device? 4 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found But I can see it whe…

Hi everyone! I bought a while a go few Rock Pi 4's for as a testing purpose and today while doing some laaarge malloc's it failed in really interesting manner; run out of memory. I did some stumbling with the code and did not find any bugs, so i looked for htop and was a very much suprised to see that my 2GB model has only 1GB total, /proc/meminfo reports same! Is this somekind of arm-specific thing that i do not just know? Memory chips (there is two of them) on the board is: NCLD4C1MA256M32 https://dl.vamrs.com/products/rock960/docs/hw/datasheets/FORESEE_LPDDR4_200ball_NCLD4CXMAXXXM32_10x14.5_VFBGA_Spec_B1_20170802.pdf 256Mb…

Hello, I bought myself a NanoPi M4V2 and 4x SATA HAT for NanoPi M4, hoping to make a small home made server with some docker containers. I installed Armbian buster 5.10.21, downloaded from your site and managed to boot the OS from an attached SATA drive. I have some experience with linux (mostly Ubuntu/Debian), I own and I’ve played with Raspberry boards and I wrote small python scripts to work with GPIO on raspberry pi (how to blink a led or how to connect and display some text on an I2C 16x2 LCD). I thought that might be a nice project if I could connect an I2C LCD to nanopi and display some text text from python script, but here where I hit a bric…

I was trying to avoid opening a new instability topic, but this one seems different enough from the others to deserve it's own discussion. A few days ago I applied the 1G fix (pic attached) to the 2.5G port - which was not in use until then, since all my hardware is 1G max. I did this with the intention of using both ports: the 1G port goes to an isolated VLAN that serves VM images to my Proxmox hosts, and the 2.5G interface (running at 1G speed) serves files to the rest of my network. While the fix appears to work and the port is able to communicate at 1G speeds seemingly fine, after changing to this setup I'm experiencing frequent drops in the USB bus, which c…

Dear Armbian supporters, Using kernel 5.10.21-rockchip64 on Rock Pi 4 (and 5.10.21-sunxi on Lime2), I am not able to mount a LUKS-encrypted drive. Changing the kernel to 5.10.16-rockchip64/5.10.16-sunxi I am able to mount the LUKS-encrypted drive again. Error message when trying to mount the drive is: "No key available with this passphrase". Which change could have introduced this bug? Greetings a5s397

HI guys, one guy at my server realized some nvme testing and the write speed results are far below compared to radxa official benchmark that's probably based on legacy kernel. anyone had better benchmarks on write speeds without legacy kernel (so, mainline)

Like many others, I get constant reboots with my Helios. I'm not sure it's worth me posting logs as a number of people already seem to be doing that. My question is, does anyone have a stable system? If so what OS and kernel are you using? I don't care about latest and greatest features, I just want it to stop hard rebooting.

Hi All, I am on my Helios64 (already have a Helios4). I am running 2 x 8TB, 1x 256 M2, OMV5 debian etc. I have ZFS running (from the wiki instructions) in a basic mirror format, and if I add a few drives I think it would still be a mirror, however I have the following question. It seems far more complicated than MDADM, and potentially more unstable (not in terms of the underlying technology, but in terms of changing these kernals etc every week). Do you think for an average home user that this is really worth it or will constantly need work? To change it would mean starting again, but I do not want to change the setup every month and wo…

Hi Armbians I have a problem with one of my NanoPi Neo 3 boards and dropped RX packages on eth0. From multiple Neo 3`s I have running, this is the only one having this issue. But its also the only one with 1GB of RAM. All other boards have 2GB of RAM. But this should not matter I think. Output ifconfig: eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet XXXXXXXXXX netmask 255.XXXXXXX broadcast XXXXXXXXXX ether XXXXXXXXXXX txqueuelen 20000 (Ethernet) RX packets 140166777 bytes 110091299296 (102.5 GiB) RX errors 0 dropped 3686 overruns 0 frame 0 TX packets 12724…

I'm experiencing a lot of issues on 5.10.x and thought a dedicated thread would make sense. I've posted some reports in other threads too. Note that 5.9.x is much more stable for me, but not without problems. I'm also experiencing what I can only refer to as boot stalls, i.e. nothing happens. Occasionally when these stalls happen there is a rcu: INFO: rcu_preempt detected stalls on CPUs/tasks trace printed. This happens on both 5.9 and 5.10. Looking at where it stalls it seems to be around the time the hardware optimizations are applied and/or graphics modules are loaded. I have currently blocked the graphics modules from loading and have moved hardware optimi…

I backed this early, and I have had nothing but stability problems since I built the thing. Sometimes my machine runs for as few as 6 minutes before crashing, and helpfully, it keeps clearing the systemd journal every time it starts up so I can't even see what happened just before it crashed. It crashes running OMV and Syncthing with high load, it crashes doing absolutely nothing but watching the systemd journal. It crashes doing nothing at all. When it crashes, it corrupts my files, and often the OMV Database requiring me to CONSTANTLY reset the GUI password for OMV, and then find that half of OMV isn't working. It does this on both uSD cards and on the inbuilt MMC.…

Hi, I am trying to disable UAS mode on attached USB HDs (I have quite a good amount of those) to avoid quite common issues. However, it seems that the usb_storage.quirks string is limited to 127 chars! dmesg shows: usb_storage.quirks: string doesn't fit in 127 chars I do not really see the point of limiting the string length to 127 chars..a bit more would be appreciated. Thanks

I’ve googled it but can’t decide, the drive works just fine (it’s the 1st of the three disks I have in the box), no performance issues when copying from/to the box. I’m currently on “Armbian 20.11”, barely get the time to play with the setup due to work assignments, plan to update soon. Thanks! (PS. Newbie here) [ 13.298079] ata1: softreset failed (1st FIS failed) [ 18.449169] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 18.467303] ata1.00: ATA-10: ST6000VN0033-2EE110, SC60, max UDMA/133 [ 18.467315] ata1.00: 11721045168 sectors, multi 0: LBA48 NCQ (depth 32), AA [ 18.470029] ata1.00: configured for UDMA/133 …

I have a nanopi neo3 rk3328. I would like to modify the i2s(1) at start. I tried to modify /boot/dtb/rockchip/rk3328-nanopi-neo3-rev02.dtb but nothing change. Which is the right dtb file its load at start? Thank you.

I have a problem with remote desktop operation on R4S. It installs according to the RDP guide and unfortunately does not work properly, after installing vncserver I also have information about - Cannot find a running X server. Everything works fine on neo3, only here I have a problem. Log VNC xstartup terminated Sending TERM signal to Xvnc... X connection to :1 broken (explicit kill or server shutdown). FreeFontPath: FPE "/usr/share/vnc/fonts/" refcount is 2, should be 1; fixing. <13> 2021-03-16T17:40:30.716Z nanopi-r4s Xvnc[5435]: ServerManager: Server stopped Link Status R4S Please Help 1) Armbian_21.02.3_Nanopi-r4s_focal_curren…

Hi Distro Debian Buster, Linux rockpi-4b 5.10.21-rockchip64 #21.02.3 SMP PREEMPT Mon Mar 8 01:05:08 UTC 2021 aarch64 GNU/Linux I trying run HDMI-CSI bridge (auvidea B101) with board RK3399. Driver is loaded but dmesg not see any communications. root@rockpi-4b:/home/stream# lsmod |grep tc tc358743 40960 0 v4l2_dv_timings 36864 1 tc358743 v4l2_fwnode 28672 1 tc358743 videodev 299008 8 rockchip_vdec,v4l2_fwnode,videobuf2_v4l2,hantro_vpu,rockchip_rga,videobuf2_common,tc358743,v4l2_mem2mem mc 61440 7 rockchip_vdec,videodev,videobuf2_v4l2,hantro_vpu,videobuf2_common,tc358743,v4l2_m…

Hi, Is TrustZone being utilized at all? I can't seem to find any documentation on what execution level Kobal is running at during boot. I assume it's dropping the Kernel into EL2? Cheers

I am using native camera ( NDKCameraManager2 ) in c++. I wanted to know whether rk3399 supports camera2 HAL3 with LEVEL_3 or not? 我在c ++中使用本机摄像头（NDKCameraManager2）。 我想知道rk3399是否支持LEVEL_3的camera2 HAL3？

Hi, I wanted to try this build so I cant test HW (using the legacy kernel). But, is impossible to make Rock64 boot correctly, having random kernel crashes, It does boot with the 5.10.x kernel version and work just fine, but I need the Legacy one so I can test HW. I can only attach a photo since there is nothing I can do since the OS is halt. Any ideas? Thanks.

I'm getting burst "VOP vblank IRQ stuck for 10 ms" error messages in dmesg and wondering what it means and if anything to improve/fix. I'm using Nanopi m4 $ uname -a Linux nanopim4 5.10.21-rockchip64 #21.02.3 SMP PREEMPT Mon Mar 8 01:05:08 UTC 2021 aarch64 aarch64 aarch64 GNU/Linux kern :err : [Sat Mar 13 22:20:13 2021] rockchip-vop ff8f0000.vop: [drm:vop_crtc_atomic_flush [rockchipdrm]] *ERROR* VOP vblank IRQ stuck for 10 ms kern :err : [Sat Mar 13 22:21:04 2021] rockchip-vop ff8f0000.vop: [drm:vop_crtc_atomic_flush [rockchipdrm]] *ERROR* VOP vblank IRQ stuck for 10 ms kern :err : [Sat Mar 13 22:21:04 2021] rockchip-vop ff8f0000.vop: [drm:vo…

I have Rock64 board with latest Armbian Focal flashed on it. I want to use it with this HDMI display by Waveshare: https://www.waveshare.com/wiki/7inch_HDMI_LCD_(H)_(with_case) Now, when I connect it to Rock64 it runs as 1080p downscaled by HDMI controller on display, resulted image is garbage, even though it is present. As was discussed here: https://forum.armbian.com/topic/10071-tinker-board-hdmi-resolutions-do-not-all-work/ current kernel/u-boot doesn't have required video mode to run this display properly. I tried to set required mode with xrandr but with no success. Can anyone help me to figure out how to patch kernel/u-boot to get this thing work properl…

Hi all. Some time ago, in the release notes of a past Armbian version, I remember reading that the network LED should now be enabled by default and associated with eth0. Despite always keeping my Helios64 as up-to-date as possible, mine never lit up, but I didn't think much of it. Today I decided to investigate why, and I'm not sure where to go from here. First things first, the LED works, it's not a hardware issue. I can echo 1 and 0 to the LED path (/sys/class/leds/helios64:blue:net/brightness) and it lights on and off as expected. From what I can tell, this LED, along with the heartbeat one, is enabled by the Systemd unit helios64-hear…

Looks like its available from youyeetoo - https://youyeetoo.com/products/asus-tinker-board-2s-rockchip-rk3399-an-arm-based-single-board-computer-sbc-support-android-10-ubuntu-tinkerboard-2s-tinker2s-1 They have it on Amazon as well. PRICEY but it's there! Has anyone from Armbian got a sample of this? Is Armbian going there? I ordered on off Amazon, will be here in a couple weeks. Perhaps EU gets it faster? Perhaps there are other sellers, I could only find this one. Actually I found it by accident on Amazon and went looking. I'm sure I didn't do an exhaustive search.

Hi - I'm running on a Rockpi 4c on Armbian 21.02.3 Buster and it the pcie-gen2 overlay doesn't seem to do anything - I have edited the /boot/armbianEnv.txt user_overlays=rockpi-penta overlays=pcie-gen2 It makes no difference if I include the pci-gen2 overlay. lspci -vv LnkCap: Port #0, Speed 8GT/s, Width x2, ASPM not supported, Exit Latency L0s <256ns, L1 <8us ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp+ LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 5GT/…

Hi Folks I am about to set up my helios64 nas on an imac mini m1 or an older intel imac mini. Buying the NAS was risky for me as I am a newbie to Linux. Nevertheless fortune favours the brave and all that. I am having difficulty finding the optimal set up of my helios64 NAS Do I buy a m.2 sata ssd and 4 western digital red pro hard drives? Do the hard drives have to be identical? Assuming I am buying Western Digital WD Red Pro NAS 4TB HDD, WD4003FFBX whats the best m.2 sata to pair up with these? I do have the 2.5 inch adapter.

Hi, I'd like to control ws2812 led's via gpio spi. I'm using this octoprint build by ldiaz: I checked /boot/armbianEnv.txt and there's overlay_prefix=rock64 and after enabling spi via armbian-config also overlays=spi-spidev. Then I rebooted but ls /dev/spi* shows nothing. Can anyone help?

I've been trying to connect a USB hdd for a while now, and depending on the SATA disk and the USB<->Sata adapter I've had different behaviours : * 700mA hdd * Adapter A works, can mount and copy * Adapter B is detected, the SATA device too in dmesg, but does not appear in lsblk. * 1A hdd (Seagate Barracuda 2To 2.5'') * Adapter A seems to be detected, the disk tries to start (sde is showing in dmesg) but usb device disappears, reappears etc ("usb disk bootloop") * Adapter B is not even detected in dmesg or lsusb ! Obviously, the 4 configurations perfectly work on a x86 host. What could be going on ? I'm pr…

Hello, i want use and control kodi on my Helios64 with the tv remote. Have someone experiance with that and a recommendation for cables or usb c dockingstation? thank you

Curious if anybody else with tick-stop error? Not certain if this applies; the only change is installing Docker and Pi-Hole containerized. A quick read seems related to a soft interrupt of 8; - The only solution I could find by googling; is: "Add nohz=off to the kernel parameters during boot to disable it." Can I safely ignore this error message; or should I do this nohz=off to the kernel parms?

Hi, On an up-to-date Helios64, around 50% of boots are stuck at "Starting kernel ...". As device is having kernel panics every day, it reboots and then sometimes can't start, stuck on this. When will we have a stable device ? I can't understand selling devices which just can't run !

I notice the Helio64 hardware supports WOL, but I can't see anything in the Wiki about it (only Helios4) The Helio64 can draw some power with 5 spinning disks, I would love to have it sleep until needed. Is there any information on setting this up? I can see Autoshutdown plugin for OMV, but there is options for: Shutdown Hibernate Suspend Hybrid Sleep Suspend then Hibernate Does Helios64 support all these methods? Then once the unit is in some form of shutdown or sleep state, how can I make use to WOL to wake it up? Thanks.

I'm having an aggressive memory leak issue I can't place: Within 5 minutes the 4GB are full. htop and top don't show a massive program growing unbouded. `df` doesn't show a tmpfs that is too large. Only `slabtop` is imforative: OBJS ACTIVE USE OBJ SIZE SLABS OBJ/SLAB CACHE SIZE NAME 26638624 26638624 99% 0.12K 832457 32 3329828K kmalloc-128 So `kmalloc-128` is growing without bounds. As I understand it kmalloc is a collection of smaller memory allocations? I've tried using a previous kernel version (5.10.16 and 5.10.12) but nada. I've disabled docker, and that along with omv were the only services running…

Hello, After I first installed my Helios64, I feared the 16Gb eMMC would be quickly filled. So when I used nand-sata-install, I chose to boot from eMMC but to have the root filesystem on a 500Gb sata drive. I have now second thoughts about it, since I realized that the OS take less than 8Gb, AND I'd like to add a 5th disk to my raid Halas nand-sata-install doesn't seem to work on an already moved filsystem. lsblk show this for the eMMC and the root partition peyo@helios64:~$ lsblk NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT sda 8:0 0 465,8G 0 disk └─sda1 8:1 0 465,8G 0 part / ... mmcb…

Hi, I have troubled to set an u-boot environment variable of NanopiM4V2. I have tried changing the rootdelay parameter by making /etc/fw_env.config file. However, I don't know how to get the number I have to write in it. NanopiM4V2 is booted from microSD card. ("cat /proc/mtd" is none) If anyone know how to set the /etc/fw_env.config file with booting from microSD card??

Hey there, so I was curious is there an easier way to make microSD take precedence in the boot order then having to futz with jumpers? Wanting to try out a new distro on microSD before deciding to make the switch and flash it to eMMC. If I do futz with jumpers I'll still be able to mount and write to the eMMC correct?

Hi, I would like to make backup(s) of my system. The system (debian) is installed on sata SSD @ slot 1. I would like to have the backup of the system written to zfs pool on the other slots as an image. Which in case of system SSD failure, I could write back to a new SSD installed on the same slot 1, by booting to a rescue system from micro sd card. Have this kind of functionality already been implemented? Or parts of it? Linux has a bunch of backup solutions, but I suspect they might not work with the helios64 box (sd card, internal ssd). And my only helios64 box is in "production" use, so "trial and error" method is not the first option in my min…

I have an FriendlyElec M4v2 board without eMMC card. (so i only use SD card) I tried this image: Armbian_21.02.1_Nanopim4v2_focal_current_5.10.12_desktop.img I Wrote to SD with Balena Etcher. After the new installation I turning on my board, I see my two attached .jpg file contents on the screen and after my screen flashes and immediately turns off my monitor (with no signal text on the screen) and if then I can only see Armbian again if I turn my monitor off and after on. So the Armbian is booting in the background, just need an HDMI channel refresh with a monitor physical off and after on. Then I installed all updates ('apt up…

Hi all, i have install on armian buster 10 on my Helios64. After the installation and the first config OMV 5 i see only two plug ins with 0 Bytes??? I have no experience and I'm asking for help!

I got the following error message when I try to install firmware-misc-nonfree_20190114-2_all.deb from the upstream debian repository. ... Get:1 http://deb.debian.org/debian buster/non-free arm64 firmware-misc-nonfree all 20190114-2 [3,338 kB] Fetched 3,338 kB in 1s (4,022 kB/s) Selecting previously unselected package firmware-misc-nonfree. (Reading database ... 77206 files and directories currently installed.) Preparing to unpack .../firmware-misc-nonfree_20190114-2_all.deb ... Unpacking firmware-misc-nonfree (20190114-2) ... dpkg: error processing archive /var/cache/apt/archives/firmware-misc-nonfree_20190114-2_all.deb (--unpack): trying to overw…

Hello, I tried Armbian_21.02.1_Orangepi4_bionic_current_5.10.12_minimal.img and Armbian_21.02.1_Orangepi4_buster_current_5.10.12.img but these two version the eth0 doesn't work. This is the ifconfig printout Last login: Thu Feb 25 09:07:13 2021 root@orangepi4:~# ifconfig eth0: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500 ether 6e:6d:04:05:d9:8c txqueuelen 1000 (Ethernet) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 device interrupt 35 lo: flags=73<UP,LOOPBACK,RU…

My Helios64 has been booting from an M.2 drive since I got it, and while I've been doing regular apt-upgrades I've been ignoring the bootloader. This post suggests that could be a problem, so I figured I'd upgrade the bootloader through armbian-config. Trouble is, I can't. I can load armbian-config without error, but when I go into System there's no Install option any more. All I have are Freeze, Nightly, Lowlevel, Bootenv, CPU, Avahi, Hardware, Other, SSH, Firmware, ZSH, Default. Is there another way to ensure the bootloader is up-to-date?

Dear H64-Friends, I've got the Armbian Debian installed with Linux Kernel 5.10 and Open Media Vault (OMV). I just use the basic functions for backing up files, nothing extraordinary. I am wondering what's the best strategy to update the Helios64 system concerning stability and getting no errors for backing up files (automatic USB-Backups). Keep it always up to date if there's an update available in OMV? Or just wait some weeks?

Hi, I want to ask, if there's a way how to turn off Helios64 without the 100% fan spin. It only takes 1 second but it's very annoying when I want to turn it off during the night. Looking https://github.com/armbian/build/blob/master/packages/bsp/helios64/fancontrol.conf and https://wiki.kobol.io/helios64/pwm/ No luck :Z

Hi, For some reason my Helios64 took a nose dive today, so I hit the reset button and it wouldn't boot up. Plugged in to the serial console and this came out: Spoiler Terminal ready DDR Version 1.24 20191016 In channel 0 CS = 0 MR0=0x18 MR4=0x1 MR5=0x1 MR8=0x10 MR12=0x72 MR14=0x72 MR18=0x0 MR19=0x0 MR24=0x8 MR25=0x0 channel 1 CS = 0 MR0=0x18 MR4=0x2 MR5=0x1 MR8=0x10 MR12=0x72 MR14=0x72 MR18=0x0 MR19=0x0 MR24=0x8 MR25=0x0 channel 0 training pass! channel 1 training pass! change freq to 416MHz 0,1 Channel 0: LPDDR4,416MHz Bus Width=32 Col=10 Bank=8 Row=16 CS=1 Die Bus-Width=16 Size=2048MB Channel 1: LPDDR4,416MHz Bus Width=32 Col=10 Bank=…