Pine A64

This is only my perception. I have this three SBC.: PINE 64 +, Nano PI A64, Banana pi M64. Everything on A64 allwinner chip. Armbian Image for Pine 64 works both Pine and Bananapi M64. But does not work NANO PI A64. Other third party software ( systems ) Remix, Ubuntu, work pine and banana pi and dont work nano pi. Only android 5.1.1 works on these three SBC....

After a recent (long overdue) update on my pine64 I found that pps-gpio was no longer working. Further investigation found that the default kernel configuration with 4.19.x no longer includes CONFIG_PPS_CLIENT_GPIO (nor CONFIG_PPS_CLIENT_LDISC). Anyone wishing to use pps-gpio (via overlay) will need to configure and build a custom kernel. user@pine64:~$ cat /etc/armbian-release # PLEASE DO NOT EDIT THIS FILE BOARD=pine64 BOARD_NAME="Pine64" BOARDFAMILY=sun50iw1 VERSION=5.76.190218 LINUXFAMILY=sunxi64 BRANCH=next ARCH=arm64 IMAGE_TYPE=nightly BOARD_TYPE=conf INITRD_ARCH=arm64 KERNEL_IMAGE_TYPE=Image user@pine64:~$ uname -a Linux pine64 4.19.25-sunxi64 #5.76.…

Hi, Wasn't sure where to start this as it's at-least potentially and partially off-topic regarding Armbian. First of all, thanks for what appears to be the best distro for the small ARM-soc devices, including the PINE64. I really appreciate all the work and houtrs that many people are dedicating to the project. Some history: The Logitech Squeezebox Touch was launched in April 2010) It has 4.3" colour touchscreen Connects to Logitech Media Server (LMS) through Ethernet or Wifi and plays songs stored there or from a wide range of internet sources. Supports 16- and 24-bit audio with a sampling rate of up to 96 kHz (or up to 192 kHz, enabled by us…

Hi, Pine 64's delivery is in full swing and thousands of people are receiving/received their Pine64 boards (Mine is scheduled for May). One of the survey shows that majority of the people have chosen to install linux on their boards. Many people are struggling to find a good image for their boards and current some what stable image is based on already end of life 3.10 kernel and there is promising development by sunxi. I am sure that thousands will get benefited if they get Armbian for Pine64. So How about Armbian for Pine 64? Regards, -- Avinash

I have tried searching but there doesn't seem to be much info on PPS support. It is a standard part of modern kernels and should be pretty consistent. On a Pine64+ using mainline kernel (debian-stretch-next) I chose an interrupt-enabled pin (PH9) updated /boot/armbianEnv.txt with overlays=pps-gpio uart1 uart2 param_pps_pin=PH9 and rebooted. I have a device (a GPS) with its PPS output connected to the Pi2 bus pin 13 that corresponds to PH9 and during boot this appears to be configured as a new PPS source: [ 5.548061] pps pps0: new PPS source pps@0.-1 [ 5.548135] pps pps0: Registered IRQ 145 as PPS source /dev/pps0 is indeed created by udev…

Everytime i reboot and/or turn-off both of my Pine A64, they dont boot again until i manually turn-off/on them a lot of times, is there any fix to it? the img i use is: Armbian_5.35_Pine64_Debian_jessie_default_3.10.107.img

Hi, I am glad you are interested to help us. A long time ago at the end of 2015 the Kickstarter was founded and since middle of 2016 the hardware is available. If you look at our download page of Pine64 you can see that since then we have collected a lot of information of which some of it maybe obsolete/outdated/resolved: https://www.armbian.com/pine64/ Now, if you are a lucky owner of such a SBC you have THE CHANCE to help the armbian project. Will you please download the latest Xenial legacy kernel 3.10.y and verifiy if some of the problems listed on the website are already solved in the current release? And if so, please re…

LCD support does not appear to be working in the latest builds (stable kernel 5.8.6, development kernel 5.9.7) My understanding is that this has been an issue for a while with A64 boards, specifically the Pine64, but that it was working at one time. Here's what I've tried so far: -Followed instructions at https://docs.armbian.com/Hardware_Allwinner/ and added "setenv video-mode sunxi:480x272-24@60,monitor=lcd,hpd=1,edid=1" to boot.cmd and put "saveenv" at the end, re-compiled boot.scr -Did a modprobe of panel-olimex-lcd-olinuxino -Rebooted several times -Ensured that LCD jumper was closed and verifie…

Hi, I've opened with tag orangepiprime because there was no a64 tag eventhough in the Armbian site is flagged as standard support, tell me if i have to reopen it elsewhere. Anyhow I'm constantly getting kernel panics during boot, I've tested images minimal/cli images starting from 23.5.1 down to 24.5.0 (just downloaded the image and flashed with balena etcher), attached there are all the serial logs of the boot processes, all of them are the same more or less. I've tried: powering from GPIO changing powersupply changing usb cable 4 different uSD cards changing the board hooking it up to a display and none of them …

I'm searching for an IDE like VSCode or Atom for my Pine64 with 2GB. I've found a way to install VSCode named Code OSS headmelted, but after 15 minutes the memory gone to be overflow, with the risk to collapse the os. Excluding Geany, is there some IDE that works and can be used for NodeJS/ES6 ?

I am trying to port my app running on legacy OS to Mainline OS and found some problems: I was able to replicate problem with following actions: 1) git cloned fresh copy of source to new directory - OK 2) edited config-default.conf: KERNEL_ONLY="no" KERNEL_CONFIGURE="no" CLEAN_LEVEL="make,debs,oldcache,images" DEST_LANG="en_US.UTF-8" BOARD="pine64so" BRANCH="next" RELEASE="xenial" BUILD_DESKTOP="yes" KERNEL_KEEP_CONFIG="no" # do not overwrite kernel config before compilation EXTERNAL="no" # build and install extra applications and drivers EXTERNAL_NEW="prebuilt" …

Hi, i'm new with linux and SBC. My final goal is to use the board as a voice command recognition system (without display) and to be honest i do not know how to start. I downloaded Armbian desktop on microSD using balenaEtcher and I inserted it in the board e powered it! i do not have a display unfortunatly and i do not know if desktop version is the best choice or i have to install an embedded version if exists. Could help please? thanks

Ciao dears, I hope this is the correct section. I tried to find a solution in this and other forums, but I found dated post . I try to open one with the hope of solving the problem also for others I'm having trouble getting the camera module s5k4ec to work for my pine64 running armbian 5.60 #cat /etc/lsb-release DISTRIB_ID=Ubuntu DISTRIB_RELEASE=16.04 DISTRIB_CODENAME=xenial DISTRIB_DESCRIPTION="Ubuntu 16.04.5 LTS" Here my armbianmonitor -u http://ix.io/1wU9. i've activated the module in/boot/armbianEnv.txt verbosity=1 console=both disp_mode=720p60 camera_type=s5k4ec pine64_lcd=off overlay_p…

Hi all, I hope someone can help me with an annoying but not pressing eMMC boot problem. Recently I bought myself a Pin64 H64 3GB SBC and an 32GB eMMC module (actually ordered a 16GB but got a 32GB :-) ) I have a Waveshare 7" TFT touchscreen attached. SBC and Screen are powered either a 5V/3A PSU or a batterypack. Now the board boots fine and fast! from a Samsung EVO sd card .. no problems there, but I cannot get the board to boot from the eMMC module. What I have done so far: 1) Flash an Armbian Buster image to the eMMC (using a USB_eMMC converter) with Etcher on Linux Mint... Boot the board from eMMC WITHOUT…

I suggest relevant discussion continues in this thread. I also urge mods to move relavant posts from here. What is Pinebook ? https://www.pine64.org/?page_id=3707 http://www.cnx-software.com/2016/11/24/pinebook-arm-linux-laptop-powered-by-allwinner-a64-processor-to-sell-for-89-and-up/

If someone is interested i have compiled some TSLIB deb packages for the Pine64 Touch Screen to work without evdev driver or any other service behind. Advantages: * Easy to install (if you know how to edit xorg.conf) * No service needed * No calibration needed Disadvantages: * works on X11 only Information and deb packages: https://github.com/avafinger/pine64-touchscreen Hope it can be useful.

I am currently developing a custom board which is based of the Pine64/Pine64-R18 dev board. I previously had an issue with the ethernet not working at u-boot level using the sopine based R18 board, this I resolved by patching u-boot with the relevant emac sections that were missing from the device tree. On the custom board we have used the R18 processor with the LAN8720 ethernet-phy chip rather than the RTL8211 used by the pine, and can't get the ethernet to initialise. We have checked rmii clock timings etc and compared the custom board to the Pine and have noticed the following:- MDC has been measured to be running at 18.6Mhz, resultin…

boot0 version : 4.0.0 set pll start set pll end rtc[0] value = 0x00000000 rtc[1] value = 0x00000000 rtc[2] value = 0x00000000 rtc[3] value = 0x00000000 rtc[4] value = 0x00000000 rtc[5] value = 0x00000000 DRAM driver version: V1.1 rsb_send_initseq: rsb clk 400Khz -> 3Mhz Set DRAM_VCC failed initializing SDRAM Fail. HELLO! BOOT0 is starting! boot0 commit : 045061a8bb2580cb3fa02e301f52a015040c158f

Hello! I installed a fresh Armbian (5.31; Server) on my Pine64 yesterday. Today I wanted to start playing around with GPIO ... And it seems like Pin 72 isn't working ... Doing the same on Pin 77, everything works fine ... For the secound test, I used https://github.com/databit/Pine64-CPP. I only added some Debug info to example.cpp. Spoiler Script started on Fri 28 Jul 2017 01:35:44 PM CEST root@pine64:/sys/class/gpio# echo "72" > export bash: echo: write error: Device or resource busy root@pine64:/sys/class/gpio# echo "72" > unexport bash: echo: write error: Invalid argument root@pine64:/sys/class/gpio# ls export gpi…

Hi, I have a Pine64-1gb laying around collecting dust for more that a year and had the idea to replace my RPi3 whitch is now running as a VPN Router. The RPi3 is restricted to 2 streams and cause cpu load to 100% so mabe the Pine64 could help here. As I already setup the RPi3 as VPN Router I thought I use the same procedure for the Pine64 with Armbian Jessie. This is what I use: HW: Pine64 with 1gb ram (Model: PA641GB) OS: ARMBIAN 5.38 stable Debian GNU/Linux 8 (jessie) 3.10.107-pine64 VPN software: OpenVPN VPN Service: PIA Here a small tutorial of the commands that I'v been used to create this VPN Gateway:…

Hi, I have a couple of these boards which I have been using with Armbian and the old, 3.10 kernel. Ideally I would really like to go mainline as later kernels have some functionality that would be useful for my use of the board. The only remaining reason (apart from cpu freq.) for sticking to the 3.10 kernel has been the lack of MIPI DSI support in mainline, but now I see that, despite the Matrix at http://linux-sunxi.org/Linux_mainlining_effort still being red for A64 mipi, some work is being/has been done by Maxime Ripard. I'm just wondering if anyone here knows if a working mainline kernel with DSI for the Pine 64 is starting to look like a p…

Just for curiosity, I've updated my Armbian on my Pine64 to the latest release. The latest u-boot for Pine64 (U-Boot SPL 2017.11-armbian (Jan 25 2018 - 08:32:21) seems to have an issue with the persistent u-boot environment. Once I've written a custom environment back to MMC using `saveenv´ the board hangs during boot. Environment size: 10335/131068 bytes => saveenv Saving Environment to MMC... Writing to MMC(0)... done => reset resetting ... INFO: PSCI Affinity Map: INFO: AffInst: Level 0, MPID 0x0, State ON INFO: AffInst: Level 0, MPID 0x1, State OFF INFO: AffInst: Level 0, MPID 0x2, State OFF INFO: AffInst: Level 0, MPID 0x3, State OFF …

Hi everyone! I'm trying to build my own distribution for the Pine64, and I use armbian as a working reference. I'm able to compile ATF + U-boot + Kernel + rootfs and the board actually boots and I get a console over the serial interface and over HDMI. The problem is that GbE Ethernet does not work. It appears that the 8211 phy is not powered. The good guys on the pine64 IRC pointed to the ATF, where the DC1SW regulator should be turned on in order to power the phy. On armbian everything works just fine. I think I messed up something in the build - wrong version / config / dts in either ATF, U-boot or the linux kernel. …

Hello everybody, since an Softwareupdate some time ago, i m not able to boot up the Pine64 with any Image. It doesnt matter what distro, or what channel. Does anybody have the same issue?

How can I keep the LTS-kernel (4.14) with a terminal command? The lastest update/upgrade installs the kernel 4.17. How can I avoid this kernel-update? For my long term-project I need the LTS-kernel 4.14. Some time ago I updated by mainline-system (Ubuntu server kernel 4.13 to 4.14-kernel with the following command apt-get -y -qq --no-install-recommends install linux-image-next-sunxi64 linux-headers-next-sunxi64 linux-u-boot-pine64-next linux-xenial-root-next-pine64 linux-dtb-next-sunxi64 Thanks a lot.

problem description as follow: our compile env: root@ubuntu69:/tycom/armbian# uname -a Linux ubuntu69 4.15.0-36-generic #39-Ubuntu SMP Mon Sep 24 16:19:09 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux root@ubuntu69:/tycom/armbian# cat /etc/os-release NAME="Ubuntu" VERSION="18.04.1 LTS (Bionic Beaver)" ID=ubuntu ID_LIKE=debian PRETTY_NAME="Ubuntu 18.04.1 LTS" VERSION_ID="18.04" Board：PINE H64 Compile Env：from https://github.com/armbian In our compile environment，generate the image file：Armbian_5.67_Pineh64_Debian_stretch_dev_4.19.2.img，we burn it into SD by Etcher，the booting is hang，no error message: Starting kernel ... …

Are there any plans of creating an image incorporating an mainline 4.xxx kernel for the pine64 boards? Kernel.org states the projected EOL for the 3.10 kernel line as october 2017.

Hi I set the DSI format to RGB888. However, looking at the output of DSI seemed to be BGR888 format, why?. About DSI format I confirmed the Allwinner A64 SoC specification, but I did not understand it well. The software and hardware used are as follows. software: Armbian hardware: Pine A64-LTS Thank you.

https://www.pine64.org/pinephone/ It gets the same cpu as the pine64. If you have a pine64 can it run common programs like firefox, vlc, libre office, gimp and jitsi? Is the pine64 as fast as the orange pi one?

Running Armbian Ubuntu Xenial 16.04 on a PineA64, legacy kernel 3.10.105-pine64. Why is it necessary or desirable to put the variable 'ethaddr' in armbianEnv.txt? I thought the hardware mac address would be detected by the kernel. Perhaps not?

(One liner added later : the problem turned out to be the Cisco SOHO switch. They're "broken from the factory". Not what you'd expect, normally or in particular from Cisco.) Hi, everyone. I've taken the liberty of posting here with regard to my problem as I have the understanding the PINE64 forums proper are run by crazy people; my thought being to stay away from there. So, I have a 1 GB PINE64. I have ethernet performance problems - but NOT, I believe, in any way related to the early production models with their hardware fault or with gigabit ethernet being flakey. My PINE64 is in fact connected to a 100mbit hub, and is …

I'm guessing it wasn't intentional that the current legacy Armbian_5.30_Pine64_Ubuntu_xenial_default_3.10.105 image for the pine64 wouldn't work without the battery? Because the "Warning: Low battery power, shutting down to recharge" line (10th line from the end) is an absolute corker (or should I say showstopper?) when there is no battery connected to the pine64! It fell over on a 2G pine64 board that I was about to build up with Armbian. Spoiler HELLO! BOOT0 is starting! boot0 commit : 045061a8bb2580cb3fa02e301f52a015040c158f boot0 version : 4.0.0 set pll start set pll end rtc[0] value = 0x00000000 rtc[1] value = 0x00000000 rtc[2] value = 0…

Hi I have Pine64+ with LCD + TouchScreen - all from Pine team. I checked some OS, but only Armbian DE is responsiveness enough for me. Now, Armbian Jessie is on SD card, stable ISO with all updates and upgrades installed - 3.10.107-pine64. Change from HDMI to LCD done by changing pine64_lcd to 'on' in /boot/armbianEnv.txt I add gt9xxf_ts in /etc/modues and restart Pine64. But cursor doesn't move on any touch. I confirm that the gt9xxf_ts module loaded by runing 'lsmod' as root, but this module is used by 0 (nobody). I've checked which event is assigned and I got: cat /proc/bus/input/devices | grep -B 2 -A 8 gt9xxf_ts I: Bus=…

Hi everybody. Does anybody know how can i add the mali driver listed below to the latest Armbian image? Any suggestion would highly appreciated. http://wiki.pine64.org/index.php/Mali_Driver

Using legacy Xenial image on pine64, I found that VPN server could not be executed due to the lack of PPP and IPSEC kernel options and probably other modules. Could be enabled on future releases ? Best regards, Gustavo.

Hi, I try to enable sound on headphone jack with pine64+ but i could not Alsa says "no sound found" at dmesg Could anyone help me? Thank you root@pine64:~# dmesg|grep -i sound [ 2.686397] No soundcards found. [ 6.323086] input: sun50i-a64-audio Headset Jack as /devices/platform/sound/sound/card0/input5 root@pine64:~# aplay -l **** List of PLAYBACK Hardware Devices **** card 0: sun50ia64audio [sun50i-a64-audio], device 0: 1c22c00.dai-sun8i-codec-aif1 sun8i-codec-aif1-0 [1c22c00.dai-sun8i-codec-aif1 sun8i-codec-aif1-0] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: sun50ia64hdmi [sun50i-a64-hdmi], device 0: 1c22800.i2s…

For PINE A64 with Ubuntu Focal (stable and nightly) with a 5 MP camera, the documentation states to add camera_type=s5k4ec to /boot/armbianEnv.txt and reboot. After rebooting, the kernel module is not available. modinfo s5k4ec returns: modinfo: ERROR: Module s5k4ec not found. The file /boot/config-5.9.8-sunxi64 shows that only camera sensors OV2640 and MT9V011 are available and CONFIG_VIDEO_S5K4ECGX is not set. Is this an issue with the build?

I need to use a 10 inch 800x600 DSI display in a Pine64 project and I think the easiest way to do this would be to modify the driver for the Pine 7 inch DSI display. It appears to me that the display resolution is hard coded in this driver (panel-feiyang-07024di26a30d.ko) and not supplied by a device tree overlay like some other Armbian SBCs. In the C source for this driver, I see the following data structure which defines a 1024x600 screen size for the 7 inch display ... static const struct drm_display_mode feiyang_default_mode = { .clock = 55000, .hdisplay = 1024, .hsync_start = 1024 + 310, .hsync_end = 1024 + 310 +…

Hello, today I made an upgrade of my pine64-mainline and failed miserably - my new armbian image won't boot any more. So I did some more tests with a new more different sd-cards, power supply and the mailine kernel form the download site (https://dl.armbian.com/pine64/Ubuntu_xenial_dev_nightly.7z): Again, the same behaviour, the image doesn't bott any more after "apt update" and "apt upgrade". Please, could someone help me with this problem? I hope these lockup logs help in troubleshooting. Thanks a lot! boot-fail-2017-09-06-A.log boot-fail-2017-09-06-B.log

Hi, We are currently developing a low cost single board computer base on Allwinner A64 Processor. Please refer to the pine64.com and https://www.kickstarter.com/projects/pine64/577817754?token=12cf383f for more detail on the board. Currently we requesting open source community to participate and help to bring up Linux BSP to Ubuntu. Please let us know if you are interested. Thanks and regards, KH Goh

Hi, Armbian gurus. I tried latest Armbian image for PineH64-b. (Armbian_20.11_Pineh64-b_focal_current_5.8.16_desktop) And I surprisingly found there is no audio device when I looked around.( by #aplay -l ) Is this expected for now? My older 5.6 kernel has HDMI device at least. I tried search audio problem around but had no discover so far. Please allow me to confirm with you. I'm looking for a good 5.8 multimedia-capable kernel to merge with my gentoo rootfs. Thank you.

I have been running Armbian on a headless Pine64 (the kickstarter one) for quite sometime without any issues. Last week I woke up in the morning and noticed that there had been a power cut. The Pine64 was on again but I couldn't SSH into it. I plugged a monitor and found the system hangs while booting with the following error: Error while loading shared libraries: lib system-shares-241.so: cannot open shared object file: No such file or directory Kernel panic - not syncing: Attempted to kill init! exitcode=0x00007f00 CPU: 1 PID: 1 Comm: init Not tainted 5.4.43-sunxi64 #20.05.2 Hardware name: Pine64+ (DT) Call trace: dump_backtrace+0x0/0x180 show_stack+0x14/0x20 dump_s…

Not sure if this has been reported - the usual way of enabling spi overaly "overlays=spi-spidev and param_spidev_spi_bus=x" seems to be broken and when an overlay fails at boot time, it tries to load the base dtb from /.../alllwinner/allwinner/*, note the extra allwinner in the path - so it fails. The pin definitions for the Euler SPI are wrong. When you manage to get both SPIs up. SPI 0 is being enabled as spi1.0 and SPI 1 being enabled as spi0.0. It also fails to merge board neutral ili9341 SPI definition files (at boot time) that has always worked on H3 and H5 boards. To work around for now, use the following ( spi0.dts, spi1.dts) to get the spidev's up …

I recently bought a couple of A64-LTS boards from the Pine Store, but I couldn't get the official Armbian images to boot on them. https://www.armbian.com/pine64/ I could, however, get Manjaro to boot on them, and when I created an SD card with U-Boot from the Manjaro SD card, and the partition from the Armbian (Bullseye CLI) image, it booted into Armbian. I noticed, though, that Manjaro distinguishes between the Pine A64(+) and the Pine A64-LTS. Tow-boot also makes the same distinction. So I wondered if maybe Armbian wasn't booting on my A64-LTS boards because it wasn't making that distinction, but it should be. (I also noticed that …

Hello , i have used now for some year armbian for this board, very many thanks for that; lately have updated to newer version Debian Trxiie and found that "htop" report a higher CPU usage after freshboot (around 50%) whereas previously it sat a 10% probably; now when evoking htop it gives (CPU offline for core 2-3-4) also nproc report "1" instead of "4"=? not sure if this an error ; noticed a similar report of nproc also with a build of volumio; thank you very much;

An extravagant man of boundless vision-part Raymond Loewy, component Buckminster Fuller, component Willy Wonka, and a smidgen Pepe Le Pew-Philippe Starck is nominally a industrial designer however truly an almost-anything-you-can-think-of designer. >> https://www.facebook.com/Bestmasticatingjuicers.zones He became famous in the 1980s and 90s because of his prong-like toothbrushes and citrus-juicers for Alessi, his sculptural chairs for Kartell, and his revolutionary interiors for Ian Schrager's first creation of boutique resorts, one of them New York's Royalton along with Miami Beach's Delano. Since then, his interests have ranged wider still, from his Sta…

I've been building armbian xenial images for my pine64+ a few times now and it works well. But I would like to switch to bionic if I can. I find it hard to find a good place of documentation for either the 4.x kernel or ubuntu bionic for armbian, specifically for A64/Pine64 boards. If I google, I see tons of forum posts with specific issues, but no coherent overview of any issues with 4.x kernels? And reading through 2-3 years of replies on some threads is a bit much to find the info I need. So what would or wouldn't work on a 4.x kernel on ubuntu bionic? Also, I am confused about who does what, and therefore where to go with problems. How are longsleep or sunxi involved …

I have a feeling this was caused by a p[roblem with the definition of ftdfile variable: line from boot.cmd: load ${devtype} 0 ${fdt_addr_r} ${prefix}dtb/allwinner/${fdtfile} from the serial output: File not found /boot/dtb/allwinner/allwinner/sun50i-a64-pine64-plus.dtb ** note the duplication of Allwinner. Since I couldn't find where it was defined , I just copied the allwinner directory into itself.....:-) which fixed the problem. Perhaps someone could look into this? thanks.

Hi, I need to set max_loop=128 to boot kernel parameter, I added to the armbianEnv.txt file but value seems zero when I look like that. cat /sys/module/loop/parameters/max_loop How can I modify that parameter? Thanks.

Running Armbian Ubuntu Xenial 16.04 on a PineA64, legacy kernel 3.10.105-pine64. Why is it necessary or desirable to put the variable 'ethaddr' in armbianEnv.txt? I thought the hardware mac address would be detected by the kernel. Perhaps not?

I have Armbian up and running very nicely on the PineA64+ 2GB board. Thanks to the community! Speed concerns aside, is it possible to attach a SATA drive to this board? What would be the recommended way to do so? It is the availability of large storage capacity that we need for our project, not blazingly fast disk writes.

Hello, I have a massive problem as the time/date on my Pine64 keep changing randomly to the year 2113. In my project, I use several Pine64s and the problem now occurs on many of these Pine64s. Unfortunately I need the correct time for my project. I am using the following system: ARMBIAN 5.32.170911 nightly Ubuntu 16.04.3 LTS 4.13.0-sun50iw1 (with additional overlays = uart3 and console = ttyS3) Could this be due to the error described in the post and is the bug fixed in kernel version 4.14? Could I install this kernel version 4.14 via armbian-config (next-kernel)? Thanks a lot for help.